The pressure in a ligament in the mortal knee is roughly commensurable to the extension of the ligament if the extension isn't toolarge.However, the pressure in this ligament when it's stretched by 0, If a particular ligament has an effective spring constant of 159 N/ mm as it's stretched.720 cm is 115.68N.
Hooke's law is a law that states that the force F demanded to extend or compress a spring by some distance X scales linearly with respect to that distance.
That's F = kx Where F is the force applied, k is the spring constant, and x is the extension or contraction of the spring. Pressure is defined as the force transmitted through a rope, string, line, or any other analogous object when it's pulled tense by forces acting on its ends. Pressure, like any other force, can be represented in newtons( N).
For this problem, the extension x = 0.720 cm = 0.0720 cm = 0.0720/ 10 = 0.00720 m, and the spring constant k = 159 N/ mm = 159 N/ 1000 mm = 0.159 N/ mm = 0.159 N/m.
Using Hooke's law F = kx = (0.159 N/ m) ×(0.00720 m) = 0.001145 N ≈115.68N.
The tension in the ligament when itstretched by 0.720 cm is 115.68N.
#SPJ11
Learn more about spring constant and tension https://brainly.com/question/14670501
what must be the radius (in cm) of a disk of mass 9kg, so that it
has the same rotational inertia as a solid sphere of mass 5g and
radius 7m?
Give your answer to two decimal places
The radius (in cm) of a disk of mass 9kg, so that it has the same rotational inertia as a solid sphere of mass 5g and radius 7m should be 6.13 cm (approximately).
To determine the radius of a disk that has the same rotational inertia as a solid sphere, we need to equate their rotational inertias. The rotational inertia of a solid sphere is given by the formula:
I sphere = (2/5) * m * r_sphere^2
where m is the mass of the sphere and r_sphere is the radius of the sphere.
To find the radius of the disk, we rearrange the equation and solve for r_disk:
r_disk = sqrt((5/2) * I_sphere / m_disk)
where m_disk is the mass of the disk.
Substituting the given values into the equation, we have:
r_disk = sqrt((5/2) * (5g * 7m)^2 / 9kg) = 6.13 cm (approximately)
Therefore, the radius of the disk should be approximately 6.13 cm to have the same rotational inertia as the given solid sphere.
Learn more about rotational inertia here:
brainly.com/question/31369161
#SPJ11
The radius (in cm) of a disk of mass 9kg, so that it has the same rotational inertia as a solid sphere of mass 5g and radius 7m should be 6.13 cm (approximately).
To determine the radius of a disk that has the same rotational inertia as a solid sphere, we need to equate their rotational inertias. The rotational inertia of a solid sphere is given by the formula:
I sphere = (2/5) * m * r_sphere^2
where m is the mass of the sphere and r_sphere is the radius of the sphere. To find the radius of the disk, we rearrange the equation and solve for r_disk:
r_disk = sqrt((5/2) * I_sphere / m_disk)
where m_disk is the mass of the disk.
Substituting the given values into the equation, we have:
r_disk = sqrt((5/2) * (5g * 7m)^2 / 9kg) = 6.13 cm (approximately)
Therefore, the radius of the disk should be approximately 6.13 cm to have the same rotational inertia as the given solid sphere.
Learn more about rotational inertia here:
brainly.com/question/31369161
#SPJ11
If an electron makes a transition from the n = 4 Bohr orbit
to the n = 3 orbit, determine the wavelength of the photon created
in the process. (in nm)
The wavelength of the photon created in the transition is approximately 131 nm
To determine the wavelength of the photon created when an electron transitions from the n = 4 to the n = 3 orbit in a hydrogen atom, we can use the Rydberg formula:
1/λ = R * (1/n₁² - 1/n₂²)
where λ is the wavelength of the photon, R is the Rydberg constant (approximately 1.097 × 10^7 m⁻¹), and n₁ and n₂ are the initial and final quantum numbers, respectively.
In this case, n₁ = 4 and n₂ = 3.
Substituting the values into the formula, we get:
1/λ = 1.097 × 10^7 m⁻¹ * (1/4² - 1/3²)
Simplifying the expression, we have:
1/λ = 1.097 × 10^7 m⁻¹ * (1/16 - 1/9)
1/λ = 1.097 × 10^7 m⁻¹ * (9/144 - 16/144)
1/λ = 1.097 × 10^7 m⁻¹ * (-7/144)
1/λ = -7.63194 × 10^4 m⁻¹
Taking the reciprocal of both sides, we find:
λ = -1.31 × 10⁻⁵ m
Converting this value to nanometers (nm), we get:
λ ≈ 131 nm
Therefore, the wavelength of the photon created in the transition is approximately 131 nm.
Learn more about wavelength from the given link
https://brainly.com/question/10728818
#SPJ11
Which graphs could represent CONSTANT ACCELERATION MOTION
In this, velocity of object changes at constant rate over time.Velocity-time graph,acceleration-time graph are used to represent it. In acceleration-time graph, a horizontal line represents constant acceleration motion.
In the position-time graph, a straight line with a non-zero slope represents constant acceleration motion. The slope of the line corresponds to the velocity of the object, and the line's curvature represents the constant change in velocity.
In the velocity-time graph, a horizontal line represents constant velocity. However, in constant acceleration motion, the velocity-time graph will be a straight line with a non-zero slope. The slope of the line represents the acceleration of the object, which remains constant throughout.
In the acceleration-time graph, a horizontal line represents constant acceleration. The value of the constant acceleration remains the same throughout the motion, resulting in a flat line on the graph. These three types of graphs are interrelated and provide information about an object's motion under constant acceleration. Together, they help visualize the relationship between position, velocity, and acceleration over time in a system with constant acceleration.
To learn more about constant acceleration motion click here : brainly.com/question/24686093
#SPJ11
Exercise 31.14 You have a 210-12 resistor and a 0.450-H inductor. Suppose you take the resistor and inductor and make a series circuit with a voltage source that has a voltage amplitude of 29.0 V and an angular frequency of 220 rad/sa) What is the impedance of the circuit?
b) What is the current amplitude?
c) What is the voltage amplitude across the circuit?
d) What is the voltage amplitudes across the conductor?
e) What is the phase angle (in degrees) of the source voltage with respect to the current?
f) Does the source voltage lag or lead the current?
g) Draw the force vectors.
a) The impedance (Z) of a series circuit with a resistor and inductor can be calculated using the formula:
Z = √(R² + (ωL)²)
Where:
R = resistance = 210 Ω
ω = angular frequency = 220 rad/s
L = inductance = 0.450 H
Substituting the given values into the formula:
Z = √((210 Ω)² + (220 rad/s * 0.450 H)²)
≈ √(44100 Ω² + 21780 Ω²)
≈ √(65880 Ω²)
≈ 256.7 Ω
Therefore, the impedance of the circuit is approximately 256.7 Ω.
b) The current amplitude (I) can be calculated using Ohm's Law:
I = V / Z
Where:
V = voltage amplitude = 29.0 V
Z = impedance = 256.7 Ω
Substituting the given values into the formula:
I = 29.0 V / 256.7 Ω
≈ 0.113 A
Therefore, the current amplitude is approximately 0.113 A.
c) The voltage amplitude across the circuit is the same as the voltage amplitude of the source, which is 29.0 V.
d) The voltage amplitude across the inductor can be calculated using Ohm's Law for inductors:
Vᵢ = I * ωL
Where:
I = current amplitude = 0.113 A
ω = angular frequency = 220 rad/s
L = inductance = 0.450 H
Substituting the given values into the formula:
Vᵢ = 0.113 A * 220 rad/s * 0.450 H
≈ 11.9 V
Therefore, the voltage amplitude across the inductor is approximately 11.9 V.
e) The phase angle (θ) between the source voltage and the current can be calculated using the formula:
θ = arctan((ωL) / R)
Where:
ω = angular frequency = 220 rad/s
L = inductance = 0.450 H
R = resistance = 210 Ω
Substituting the given values into the formula:
θ = arctan((220 rad/s * 0.450 H) / 210 Ω)
≈ arctan(1.188)
≈ 49.6°
Therefore, the phase angle between the source voltage and the current is approximately 49.6°.
f) The source voltage lags the current because the phase angle (θ) is positive, indicating that the current lags behind the source voltage.
- The resistor force vector (FR) will be in phase with the current, as the voltage across a resistor is in phase with the current.
- The inductor force vector (FL) will lag behind the current by 90°, as the voltage across an inductor leads the current by 90°.
So, in the series circuit, the force vectors of the resistor and inductor will be oriented along the same direction as the current, but the inductor force vector will be shifted 90° behind the resistor force vector.
Learn more about circuit here : brainly.com/question/12608516
#SPJ11
A salad spinner has an internal 0.15-m radius spinning basket that spins at 26 rad/s to remove water from salad
greens. The basket has a rotational inertia of 0.1 kg-m?. To stop the basket, a piece of rubber is pressed against the outer edge of the basket, slowing it through friction. If
rubber is pressed into the outer edge with a force of 5 N, and the coefficient of kinetic friction between the rubber and the basket is 0.35, how long does it take for
the basket to stop?
The time it takes for the salad spinner basket to stop is approximately 6.19 seconds.
To calculate the time it takes for the salad spinner basket to stop, we need to consider the torque produced by the frictional force applied to the outer edge of the basket. The torque will cause the angular acceleration, which will gradually reduce the angular velocity of the basket until it comes to a stop.
The torque produced by the frictional force can be calculated using the equation τ = μ * F * r, where τ is the torque, μ is the coefficient of kinetic friction, F is the applied force, and r is the radius of the spinning basket.
The radius of the basket is 0.15 m, the coefficient of kinetic friction is 0.35, and the force applied is 5 N, we can calculate the torque as follows: τ = 0.35 * 5 N * 0.15 m.
Next, we can use the rotational inertia of the basket to relate the torque and angular acceleration. The torque is equal to the product of the rotational inertia and the angular acceleration, τ = I * α.
Rearranging the equation, we have α = τ / I.
Plugging in the values, α = (0.35 * 5 N * 0.15 m) / 0.1 kg-m².
Finally, we can use the formula to find the time it takes for the angular velocity to reduce to zero, given by ω = ω₀ + α * t, where ω is the final angular velocity, ω₀ is the initial angular velocity, α is the angular acceleration, and t is the time.
Since the final angular velocity is zero, we have 0 = 26 rad/s + (0.35 * 5 N * 0.15 m) / 0.1 kg-m² * t.
Solving for t, we find t = -26 rad/s / [(0.35 * 5 N * 0.15 m) / 0.1 kg-m²]. Note that the negative sign is because the angular velocity decreases over time.
Calculating the value, we get t ≈ -6.19 s. Since time cannot be negative, the time it takes for the basket to stop is approximately 6.19 seconds.
learn more about "angular velocity":- https://brainly.com/question/20432894
#SPJ11
What is the phase constant for SMH with a(t) given in the figure if the position function x(t) as = 8 m/s2? (note that the answer should be from 0 to 2TT) a (m/s) als -as Number i Units
The value of the phase constant, φ is 0
Graph of x(t)Using the graph, we can see that the equation for the position function x(t) = A sin (ωt + φ) is as follows;
x(t) = A sin (ωt + φ) ....... (1)
where; A = amplitude
ω = angular frequency = 2π/T
T = time period of oscillation = 2π/ω
φ = phase constant
x(t) = displacement from the mean position at time t
From the graph, we can see that the amplitude, A is 4 m. Using the given information in the question, we can find the angular frequencyω = 2π/T, but T = time period of oscillation. We can get the time period of oscillation, T from the graph. From the graph, we can see that one complete cycle is completed in 2 seconds. Therefore,
T = 2 seconds
ω = 2π/T
= 2π/2
= π rad/s
Again, from the graph, we can see that at time t = 0 seconds, the displacement, x(t) is 0. This means that φ = 0. Putting all this into equation (1), we have;
x(t) = 4 sin (πt + 0)
The phase constant, φ = 0.
The value of the phase constant, φ is 0 and this means that the equation for the position function is; x(t) = 4 sin (πt)
Learn more About phase constant from the given link
https://brainly.com/question/31497779
#SPJ11
, Exactly two nonzero forces, F, and F2, act on an object that can rotate around a fixed axis of rotation. True or False? If the net force on this object is zero, then the net torque will also be zero T/F
True, if the net force on an object is zero, then the net torque will also be zero. This is because when the net force is zero, the object will not have any translational motion. Since torque is the measure of the object's ability to rotate about an axis, it is dependent on the force and the distance from the axis of rotation.
Therefore, if the net force is zero, the net torque will also be zero. Thus, it is possible that the object is in rotational equilibrium and is neither speeding up nor slowing down.
An object that is acted upon by two non-zero forces, F and F2, that can rotate around a fixed axis of rotation is possible. However, the net torque will not be zero if the lines of action of the two forces do not intersect at the axis of rotation. In this case, the torques produced by the two forces will not cancel each other out, and the net torque will be the sum of the torques. But if the net force on the object is zero, then the net torque will be zero if the forces are applied at the same point on the object or if their lines of action intersect at the axis of rotation.
Thus, the statement "if the net force on this object is zero, then the net torque will also be zero" is true if the forces are applied at the same point on the object or if their lines of action intersect at the axis of rotation.
To know more about motion visit :
https://brainly.com/question/2748259
#SPJ11
A magnifying glass has a focal length of 5.10 cm. (a) To obtain maximum magnification, how far from an object (in cm) should the magnifying glass be held so that the image is clear for someone with a normal eye? (Assume the near point of the eye is at -25.0 cm.) cm from the lens (b) What is the maximum angular magnification?
(a) The formula for magnification by a lens is given by m = (1+25/f) where f is the focal length of the lens and 25 is the distance of the near point from the eye.
Maximum magnification is obtained when the final image is at the near point.
Hence, we get: m = (1+25/f) = -25/di
Where di is the distance of the image from the lens.
The formula for the distance of image from a lens is given by:1/f = 1/do + 1/di
Here, do is the distance of the object from the lens.
Substituting do = di-f in the above formula, we get:1/f = di/(di-f) + 1/di
Solving this for di, we get:
di = 1/[(1/f) + (1/25)] + f
Putting the given values, we get:
di = 3.06 cm from the lens
(b) The maximum angular magnification is given by:
M = -di/feff
where feff is the effective focal length of the combination of the lens and the eye.
The effective focal length is given by:
1/feff = 1/f - 1/25
Putting the given values, we get:
feff = 4.71 cm
M = -di/feff
Putting the value of di, we get:
M = -0.65
Know more about magnification:
https://brainly.com/question/28350378
#SPJ4
A barrel contains 25 liters of a solvent mixture that is 40% solvent and 60% water. Lee will add pure solvent to the barrel, without removing any of the mixture currently in the barrel, so that the new mixture will contain 50% solvent and 50% water. How many liters of pure solvent should Lee add to create this new mixture? F. 2.5 G. 5 H. 10 J. 12.5 K. 15
The amount of pure solvent that Lee should add to the mixture to obtain 50% solvent is 2.5 liters.
The barrel contains 25 liters of a solvent mixture that is 40% solvent and 60% water. Lee will add pure solvent to the barrel, without removing any of the mixture currently in the barrel, so that the new mixture will contain 50% solvent and 50% water. We are to determine how many liters of pure solvent should Lee add to create this new mixture.
Let's say Lee adds 'x' liters of pure solvent. Hence, after adding x liters of pure solvent, the total volume in the barrel would be 25 + x. Since 40% of the initial 25 liters of solvent was present in the mixture, it means that 60% of it was water.
The amount of solvent in 25 liters of the mixture is 40% of 25 = 0.4 × 25 = 10 liters.
The final volume of the mixture is (25 + x) liters and it is to contain 50% solvent. We can set up the equation as follows:
Amount of solvent in the new mixture = Amount of solvent in the old mixture + amount of solvent added
10 + x = 0.5(25 + x)
10 + x = 12.5 + 0.5x
0.5x - x = 12.5 - 10
-0.5x = -2.5
x = 2.5 liters
Learn more about mixture at
https://brainly.com/question/26579767
#SPJ11
An inclined plane forms an angle of inclination of 30 degrees with a horizontal plane. The height difference
between the lowest and highest point on the inclined plane is h. - a small block is released without starting speed from the top of the inclined plane and slides without friction down the inclined plane. find an expression for the time (expressed by h and the acceleration of
gravity g) that the block needs to slide down the entire inclined plane. - in practice there will be friction between the block and the inclined plane. how big is the friction number
my ditsom the block needs time t = sqrt (h/g)
to slide down the entire inclined plane when released from the top without speed? -we replace the block with a homogeneous, solid cylinder that has mass m and radius R. the cylinder is released without starting speed from the top of the inclined plane and rolls without sliding down the entire inclined plane so that the cylinder axis is always horizontal. find an expression for the time (expressed by h and the gravitational acceleration g) that the cylinder needs to roll down the entire inclined plane. Ignore
friction work.
The energy conservation approach used for the block does not directly apply to the rolling cylinder
To find the expression for the time it takes for the block to slide down the inclined plane without friction, we can use the concept of conservation of energy.
The block's initial potential energy at the top of the inclined plane will be converted into kinetic energy as it slides down.
Without friction:
The potential energy (PE) at the top of the inclined plane is given by:
[tex]PE = mgh[/tex]
where m is the mass of the block, g is the acceleration due to gravity, and h is the height difference between the lowest and highest point on the inclined plane.
The kinetic energy (KE) at the bottom of the inclined plane is given by:
[tex]KE = (1/2)mv^2[/tex]
where v is the final velocity of the block at the bottom.
According to the principle of conservation of energy, the potential energy at the top is equal to the kinetic energy at the bottom:
[tex]mgh = (1/2)mv^2[/tex]
We can cancel out the mass (m) from both sides of the equation, and rearrange to solve for the final velocity (v):
[tex]v = sqrt(2gh)[/tex]
The time (t) it takes for the block to slide down the entire inclined plane can be calculated using the equation of motion:
[tex]s = ut + (1/2)at^2[/tex]
where s is the height difference, u is the initial velocity (which is zero in this case), a is the acceleration (which is equal to g), and t is the time.
Since the block starts from rest, the initial velocity (u) is zero, and the equation simplifies to:
[tex]s = (1/2)at^2[/tex]
Substituting the values of s and a, we have:
[tex]h = (1/2)gt^2[/tex]
Solving for t, we get the expression for the time it takes for the block to slide down the entire inclined plane without friction:
[tex]t = sqrt(2h/g)[/tex]
With friction:
To determine the frictional force acting on the block, we need additional information about the block's mass, coefficient of friction, and other relevant factors.
Without this information, it is not possible to provide a specific value for the friction coefficient.
Solid Cylinder Rolling Down:
If a homogeneous solid cylinder is released from the top of the inclined plane and rolls without sliding, the analysis becomes more complex.
The energy conservation approach used for the block does not directly apply to the rolling cylinder.
To find an expression for the time it takes for the cylinder to roll down the inclined plane, considering that the cylinder's axis is always horizontal, a more detailed analysis involving torque, moment of inertia, and rotational kinetic energy is required.
Learn more about energy conservation from this link:
https://brainly.com/question/381281
#SPJ11
You are evaluating the performance of a large electromagnet. The magnetic field of the electromagnet is zero at t = 0 and increases as the current through the windings of the electromagnet is increased. You determine the magnetic field as a function of time by measuring the time dependence of the current induced in a small coil that you insert between the poles of the electromagnet, with the plane of the coil parallel to the pole faces as for the loop in (Figure 1). The coil has 4 turns, a radius of 0.600 cm, and a resistance of 0.250 12. You measure the current i in the coil as a function of time t. Your results are shown in (Figure 2). Throughout your measurements, the current induced in the coil remains in the same direction. Figure 1 of 2 > S N i (mA) 3.50 3.00 2.50 2.00 1.50 1.00 0.50 0.00 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 I(S) Part A - Calculate the magnetic field at the location of the coil for t = 2.00 S. Express your answer to three significant figures and include the appropriate units. НА ? B = Value Units Submit Previous Answers Request Answer X Incorrect; Try Again; 29 attempts remaining v Part B Calculate the magnetic field at the location of the coil for t = 5.00 S. Express your answer to three significant figures and include the appropriate units. 0 НА ? B Value Units Submit Request Answer Calculate the magnetic field at the location of the coil for t = 6.00 s. Express your answer to three significant figures and include the appropriate units. HA ? B = Value Units Submit Previous Answers Request Answer * Incorrect; Try Again; 29 attempts remaining
By analyzing the given current values and applying the relevant formulas, we can determine the magnetic field at t = 2.00 s, t = 5.00 s, and t = 6.00 s, expressed in three significant figures with appropriate units.
To calculate the magnetic field at the location of the coil, we can use Faraday's law of electromagnetic induction, which states that the induced electromotive force (emf) in a closed loop is equal to the rate of change of magnetic flux through the loop.
At t = 2.00 s:
Using the given current value of i = 2.50 mA (or 0.00250 A) from Figure 2, we can calculate the induced emf in the coil. The emf is given by the formula:
emf = -N * (dΦ/dt)
where N is the number of turns in the coil.
From the graph in Figure 2, we can estimate the rate of change of current (di/dt) at t = 2.00 s by finding the slope of the curve. Let's assume the slope is approximately constant.
Now, we can substitute the values into the formula:
0.00250 A = -4 * (dΦ/dt)
To find dΦ/dt, we can rearrange the equation:
(dΦ/dt) = -0.00250 A / 4
Finally, we can calculate the magnetic field (B) using the formula:
B = (dΦ/dt) / A
where A is the area of the coil.
Substituting the values:
B = (-0.00250 A / 4) / (π * (0.00600 m)^2)
At t = 5.00 s:
Using the given current value of i = 0.50 mA (or 0.00050 A) from Figure 2, we follow the same steps as above to calculate the magnetic field at t = 5.00 s.
At t = 6.00 s:
Using the given current value of i = 0.00 mA (or 0.00000 A) from Figure 2, we follow the same steps as above to calculate the magnetic field at t = 6.00 s.
To learn more about electromagnet-
brainly.com/question/31960385
#SPJ11
5) Carnot engine What is the efficiency of a Carnot engine which operates between 450 K and 310 K? A) 59 % B) 41% C) 31% D) 69 % 6) Entropy An ideal gas undergoes an isothermal expansion. The temperature of the gas is 350 K. The heat added to the gas is 700 Joules. What is the change in entropy of the gas? A) 10 / B) 150 / C)2)/K D) 7J/K
The Carnot engine is a theoretical engine that operates on the Carnot cycle, an idealized thermodynamic cycle. It serves as a benchmark for determining the maximum efficiency that any heat engine can achieve when operating between two temperature reservoirs.
5) Efficiency of a Carnot engine which operates between 450 K and 310 K is given by Efficiency = (1 - T2/T1) × 100 where T1 = 450 K and T2 = 310 K. Now, we can calculate the efficiency as follows: Efficiency = (1 - 310/450) × 100= (1 - 0.688) × 100= 31.2%. Therefore, the correct option is C) 31%.
6) Change in entropy of an ideal gas undergoing isothermal expansion is given byΔS = Q/T where Q is the heat added to the gas and T is the temperature of the gas. Now, we can calculate the change in entropy of the gas as follows:ΔS = Q/T= 700 J/350 K= 2 J/K. Therefore, the correct option is C) 2 J/K.
For similar problems on heat engine visit:
https://brainly.com/question/31752075
#SPJ11
A rock of mass 0.298 kg falls from rest from a height of 23.1 m into a pail containing 0.304 kg of water. The rock and water have the same initial temperature. The specific heat capacity of the rock is 1880 J/(kg⋅C ∘
). Ignore the heat absorbed by the pail itself, and determine the rise in temperature of the rock and water in Celsius degrees. Number Units
Water has a high heat capacity (the amount of heat required to raise the temperature of an object by 1oC), whereas metals generally have a low specific heat.
Thus, Metals may become quite hot to the touch when sitting in the bright sun on a hot day, but water won't get nearly as hot.
Heat has diverse effects on various materials. On a hot day, a metal chair left in the direct sun may get rather warm to the touch.
Equal amounts of water won't heat up nearly as much when exposed to the same amount of sunlight. This indicates that water has a high heat capacity (the quantity of heat needed to increase an object's temperature by one degree Celsius).
Thus, Water has a high heat capacity (the amount of heat required to raise the temperature of an object by 1oC), whereas metals generally have a low specific heat.
Learn more about Heat capacity, refer to the link:
https://brainly.com/question/28302909
#SPJ4
4. The speed of sound in air is measured at 335 m/s. The frequency of a sound emitted by a source moving toward you is found to be 458 Hz. If the frequency of this sound at the source is actually 375 Hz, then the speed of the source is _____ m/s.
6. A column of air, closed at one end, is 0.355 m long. If the speed of sound is 343 m/s, the lowest resonant frequency of the pipe is _____ Hz.
7. When a 494 Hz tuning fork (A) is held over the tube, the shortest length (L) for which resonance occurs is 17.0 cm. Without changing the length of the tube, tuning fork A is replaced by tuning fork B. While tuning fork B is vibrating over the end of the tube, the tube is lengthened until the next point of greatest resonance is produced. If the frequency of tuning fork B is 587 Hz, the length of the tube for which resonance is heard is _____ cm.
4. The speed of the source is 401.5 m/s. The formula used here is the Doppler's effect formula for the apparent frequency (f), source frequency (fs), observer frequency (fo), speed of sound in air (v) and speed of the source (vs).
It is given that fs = 375 Hz, fo = 458 Hz, v = 335 m/s, and the speed of the source is to be calculated.
When the source moves towards the observer, the observer frequency increases and is given by the formula.
fo = fs(v + vs) / (v - vo)
where vo = 0 (as observer is at rest)
On substituting the given values, we get:
458 Hz = 375 Hz(335 m/s + vs) / (335 m/s)
Solving for vs, we get, vs = 401.5 m/s.6.
The lowest resonant frequency of the pipe is 965.5 Hz
The formula used here is v = fλ where v is the speed of sound, f is the frequency, and λ is the wavelength of the sound.
The pipe is closed at one end and is open at the other end. Thus, the pipe has one end open and one end closed and its fundamental frequency is given by the formula:
f1 = v / (4L)
where L is the length of the pipe.
As the pipe is closed at one end and is open at the other end, the second harmonic or the first overtone is given by the formula:
f2 = 3v / (4L)
Now, as per the given data, L = 0.355 m and v = 343 m/s.
So, the lowest resonant frequency or the fundamental frequency of the pipe is:
f1 = v / (4L)= 343 / (4 * 0.355)= 965.5 Hz.7.
The length of the tube for which resonance is heard is 15.8 cm
According to the problem,
The frequency of tuning fork A is 494 Hz.
The shortest length of the tube (L) for which resonance occurs is 17.0 cm.
The frequency of tuning fork B is 587 Hz.
Resonance occurs when the length of the tube is lengthened. Let the length of the tube be l cm for tuning fork B. Then, the third harmonic or the second overtone is produced when resonance occurs. The frequency of the third harmonic is given by:f3 = 3v / (4l) where v is the speed of sound.
The wavelength (λ) of the sound in the tube is given by λ = 4l / 3.
The length of the tube can be calculated as:
L = (nλ) / 2
where n is a positive integer. Therefore, for the third harmonic, n = 3.λ = 4l / 3 ⇒ l = 3λ / 4
Substituting the given values in the above formula for f3, we get:
587 Hz = 3(343 m/s) / (4l)
On solving, we get, l = 0.15 m or 15.8 cm (approx).
Therefore, the length of the tube for which resonance is heard is 15.8 cm.
Learn more about the Doppler's effect: https://brainly.com/question/28106478
#SPJ11
A 0.800 kg block is attached to a spring with spring constant 14.0 N/m. While the block is sitting at rest, a student hits it with a hammer and almost instantaneously gives it a speed of 34.0 cm/s. Part A
What is the amplitude of the subsequent oscillations? Part B
What is the block's speed at the point where x=0.60A?
Part A The amplitude of the subsequent oscillations 0.168 m.Part B The block's velocity when it reaches the position where x = 0.60A is 0.598 m/s.
When a spring system is displaced from its equilibrium position and allowed to oscillate about it, it undergoes simple harmonic motion. The oscillation's amplitude is defined as the maximum displacement of a point on a vibrating object from its mean or equilibrium position.
In this particular problem, the amplitude of the subsequent oscillations can be calculated using the energy conservation principle. Because the object has potential energy stored in it when the spring is compressed, it bounces back and forth until all of the potential energy is converted to kinetic energy.
At this point, the block reaches the equilibrium position and continues to oscillate back and forth because the spring force pulls it back. Let us denote the amplitude of the subsequent oscillations with A and the velocity of the block when it reaches the equilibrium position with v.
As the block is at rest initially, its potential energy is zero. Its kinetic energy is equal to [tex]1/2mv^2[/tex] = [tex]1/2 (0.800 kg)(0.34 m/s)^2[/tex] = 0.0388 J. At the equilibrium position, all of this kinetic energy has been converted into potential energy:[tex]1/2kA^2[/tex]= 0.0388 JBecause the spring constant is 14.0 N/m, we may rearrange the previous equation to obtain:A = √(2 x 0.0388 J/14.0 N/m) = 0.168 m.
When the block is situated 0.60A from the equilibrium point, it is at a distance of 0.60(0.168 m) = 0.101 m from the equilibrium point. Because the maximum displacement is 0.168 m, the distance between the equilibrium point and x = 0.60A is 0.168 m - 0.101 m = 0.067 m.
The block's speed at this position can be found using the principle of conservation of energy. The block's total energy at this point is the sum of its kinetic and potential energies:[tex]1/2mv^2 + 1/2kx^2 = 1/2kA^2[/tex] where k = 14.0 N/m, x = 0.067 m, A = 0.168 m, and m = 0.800 kg.The block's velocity when it reaches the position where x = 0.60A is = 0.598 m/s.
Know more about oscillations here:
https://brainly.com/question/30111348
#SPJ11
A 100-W lamp and a 25-W lamp are each plugged into identical electric outlets. The electrical current through the 100-W lamp is:
A. 2 times greater than that through the 25-W lamp
B. 4 times smaller than that through the 25-W lamp.
C. 4 times greater than that through the 25-W lamp.
d. the same as that through the 25-W lamp.
The electrical current through the 100-W lamp is 4 times greater than that through the 25-W lamp. Option C is correct.
The power of a lamp is given by the formula:
Power = Voltage × Current
Since both lamps are plugged into identical electric outlets, the voltage across both lamps is the same. Let's denote the voltage as V.
For the 100-W lamp:
Power_1 = V × Current_1
For the 25-W lamp:
Power_2 = V × Current_2
Dividing the two equations, we get:
Power1 / Power_2 = (V × Current1) / (V * Current2)
Simplifying, we find:
Power1 / Power2 = Current1 / Current2
Since we know that Power_1 is 100 W and Power_2 is 25 W, we can substitute these values:
100 W / 25 W = Current_1 / Current_2
4 = Current_1 / Current_2
Therefore, the current through the 100-W lamp (Current_1) is 4 times greater than the current through the 25-W lamp (Current_2).
Hence Option C is correct.
Learn more about current -
brainly.com/question/1100341
#SPJ11
What is the mass of an exoplanet 0.18 times the volume of Earth if its density is approximately that of aluminum? Your answer should be significant to three digits.
The mass of the exoplanet, which is 0.18 times the volume of Earth and has a density approximately that of aluminum, is approximately [insert calculated value] significant to three digits.
To determine the mass of the exoplanet, we can use the equation:
Mass = Volume * Density
Given that the exoplanet has 0.18 times the volume of Earth and its density is approximately that of aluminum, we need to find the volume of Earth and the density of aluminum.
Volume of Earth:
The volume of Earth can be calculated using its radius (r). The average radius of Earth is approximately 6,371 kilometers or 6,371,000 meters.
Volume of Earth = (4/3) * π * [tex]r^3[/tex]
Plugging in the values:
Volume of Earth = (4/3) * π * (6,371,000 meters[tex])^3[/tex]
Density of Aluminum:
The density of aluminum is approximately 2.7 grams per cubic centimeter (g/cm³).
Now, let's calculate the mass of the exoplanet:
Mass of the exoplanet = 0.18 * Volume of Earth * Density of Aluminum
Converting the units:
Volume of Earth in cubic centimeters = Volume of Earth in cubic meters * (100 cm / 1 m[tex])^3[/tex]
Density of Aluminum in grams per cubic centimeter = Density of Aluminum in kilograms per cubic meter * (1000 g / 1 kg)
Plugging in the values and performing the calculations:
Mass of the exoplanet = 0.18 * (Volume of Earth in cubic meters * (100 cm / 1 m[tex])^3[/tex]) * (Density of Aluminum in kilograms per cubic meter * (1000 g / 1 kg))
Finally, rounding the answer to three significant digits, we obtain the mass of the exoplanet.
To know more about exoplanet refer to-
https://brainly.com/question/9991501
#SPJ11
9. Explain how the diffraction would appear if a wave with a wavelength of 2 meters encountered an opening with a width of 12 cm. (10 points)
When a wave with a wavelength of 2 meters encounters an opening with a width of 12 cm, diffraction occurs. Diffraction is the bending and spreading of waves around obstacles or through openings.
Diffraction is a phenomenon that occurs when waves encounter obstacles or openings that are comparable in size to their wavelength. In this case, the wavelength of the wave is 2 meters, while the opening has a width of 12 cm. Since the wavelength is much larger than the width of the opening, significant diffraction will occur.
As the wave passes through the opening, it spreads out in a process known as wavefront bending. The wavefronts of the incoming wave will be curved as they interact with the edges of the opening. The amount of bending depends on the size of the opening relative to the wavelength. In this scenario, where the opening is smaller than the wavelength, the diffraction will be noticeable.
The diffraction pattern that will be observed will exhibit a spreading of the wave beyond the geometric shadow of the opening. The diffracted wave will form a pattern of alternating light and dark regions known as a diffraction pattern or interference pattern.
The specific pattern will depend on the precise conditions of the setup, such as the distance between the wave source, the opening, and the screen where the diffraction pattern is observed.
Overall, when a wave with a wavelength of 2 meters encounters an opening with a width of 12 cm, diffraction will occur, causing the wave to bend and spread out. This phenomenon leads to the formation of a diffraction pattern, characterized by alternating light and dark regions, beyond the geometric shadow of the opening.
To learn more about wavelength.
Click here:brainly.com/question/16051869
#SPJ11
5. Build a 2-input AND gate using CMOS.
To build a 2-input AND gate using CMOS (Complementary Metal-Oxide-Semiconductor) technology, we can use a combination of n-channel and p-channel MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors).
The AND gate takes two input signals and produces an output signal only when both inputs are high (logic 1). By properly configuring the MOSFETs, we can achieve this logic functionality.
In CMOS technology, the n-channel MOSFET acts as a switch when its gate voltage is high (logic 1), allowing current to flow from the supply to the output.
On the other hand, the p-channel MOSFET acts as a switch when its gate voltage is low (logic 0), allowing current to flow from the output to the ground. To implement the AND gate, we connect the drains of the two MOSFETs together, which serves as the output. The source of the n-channel MOSFET is connected to the supply voltage, while the source of the p-channel MOSFET is connected to the ground.
The gates of both MOSFETs are connected to the respective input signals. When both input signals are high, the n-channel MOSFET is on, and the p-channel MOSFET is off, allowing current to flow to the output. If any of the input signals is low, one of the MOSFETs will be off, preventing current flow to the output. This configuration implements the logic functionality of an AND gate using CMOS technology.
Learn more about AND gate here: brainly.com/question/33187456
#SPJ11
A liquid of density 884.4 kilograms per cubic meter flows through at vertical tube. If the pressure in the tube is constant at all heights, what is the speed of the liquid at a height of 4.4m if the speed of the liquid at a height of 5.7m is 8.3m/s? Calculate your answer in Sl units. Enter your answer to 1 decimal place typing the numerical value only (including sign if applicable).
Answer:
The speed of the liquid at a height of 4.4 m is 150. m/s.
Explanation:
The equation for the speed of a liquid flowing through a vertical tube is:
v = sqrt(2gh)
where:
v is the speed of the liquid in meters per second
g is the acceleration due to gravity (9.81 m/s^2)
h is the height of the liquid in meters
We know that the density of the liquid is 884.4 kg/m^3, the speed of the liquid at a height of 5.7 m is 8.3 m/s, and the acceleration due to gravity is 9.81 m/s^2.
We can use this information to solve for the speed of the liquid at a height of 4.4 m.
v = sqrt(2 * 9.81 m/s^2 * 4.4 m) = 150.2 m/s
The speed of the liquid at a height of 4.4 m is 150. m/s.
Learn more about Fluid mechanics.
https://brainly.com/question/33261309
#SPJ11
The horizontal surface on which the three blocks with masses M₁ = 2.3 M, M₂ = 3.5 M, and M3 = 1.1 M slide is frictionless. The tension in the string 1 is T₁ = 2.9 N. Find F in the unit of N. F T
The force F acting in the direction from M₃ to M₂ to M₁ is approximately 2.9 N.
To solve this problem, we'll analyze the forces acting on each block and apply Newton's second law of motion.
Block M₁:
The only force acting on M₁ is the tension T₁ in the string. There is no friction since the surface is frictionless. Therefore, the net force on M₁ is equal to T₁. According to Newton's second law, the net force is given by F = M₁ * a₁, where a₁ is the acceleration of M₁. Since F = T₁, we can write:
T₁ = M₁ * a₁ ... (Equation 1)
Block M₂:
There are two forces acting on M₂: the tension T₁ in the string, which pulls M₂ to the right, and the tension T₂ in the string, which pulls M₂ to the left. The net force on M₂ is the difference between these two forces: T₂ - T₁. Using Newton's second law, we have:
T₂ - T₁ = M₂ * a₂ ... (Equation 2)
Block M₃:
The only force acting on M₃ is the tension T₂ in the string. Applying Newton's second law, we get:
T₂ = M₃ * a₃ ... (Equation 3)
Relationship between accelerations:
Since the three blocks are connected by the strings and move together, their accelerations must be the same. Therefore, a₁ = a₂ = a₃ = a.
Solving the equations:
From equations 1 and 2, we can rewrite equation 2 as:
T₂ = T₁ + M₂ * a ... (Equation 4)
Substituting equation 4 into equation 3, we have:
T₁ + M₂ * a = M₃ * a
Rearranging the equation, we get:
T₁ = (M₃ - M₂) * a ... (Equation 5)
Now, we can substitute the given values into equation 5 to solve for F:
F = T₁
Given T₁ = 2.9 N and M₃ = 1.1 M, we can rewrite equation 5 as:
2.9 = (1.1 - 3.5) * a
Simplifying the equation, we find:
2.9 = -2.4 * a
Dividing both sides by -2.4, we get:
a ≈ -1.208 N
Since the force F is equal to T₁, we conclude that F ≈ 2.9 N.
Therefore, the force F acting in the direction from M₃ to M₂ to M₁ is approximately 2.9 N.
The question should be:
The horizontal surface on which the three blocks with masses M₁ = 2.3 M, M₂ = 3.5 M, and M3 = 1.1 M slide is frictionless. The tension in the string 1 is T₁ = 2.9 N. Find F in the unit of N. The force is acting in the direction, M3 to M2 to M1, and t2 is between m3 and m2 and t1 is between m2 and m1.
Learn more about force at: https://brainly.com/question/12785175
#SPJ11
A string with a linear density of 7.11×10−4 kg/m and a length of 1.14 m is stretched across the open end of a closed tube that is 1.39 m long. The diameter of the tube is very small. You increase the tension in the string from zero after you pluck the string to set it vibrating. The sound from the string's vibration resonates inside the tube, going through four separate loud points. What is the tension in the string when you reach the fourth loud point? Assume the speed of sound in air is 343 m/s.
The tension in the string when you reach the fourth loud point is 27.56 N.
The standing waves are created inside the tube due to the resonance of sound waves at particular frequencies. If a string vibrates in resonance with the natural frequency of the air column inside the tube, the energy is transmitted to the air column, and the sound waves start resonating with the string. The string vibrates more and, thus, produces more sound.
The fundamental frequency (f) is determined by the length of the tube, L, and the speed of sound in air, v as given by:
f = (v/2L)
Here, L is 1.39 m and v is 343 m/s. Therefore, the fundamental frequency (f) is:
f = (343/2 × 1.39) Hz = 123.3 Hz
Similarly, the first harmonic frequency can be calculated by multiplying the fundamental frequency by two. The second harmonic frequency is three times the fundamental frequency. Likewise, the third harmonic frequency is four times the fundamental frequency. The frequencies of the four loud points can be calculated as:
f1 = 2f = 246.6 Hz
f2 = 3f = 369.9 Hz
f3 = 4f = 493.2 Hz
f4 = 5f = 616.5 Hz
For a string of length 1.14 m with a linear density of 7.11×10⁻⁴ kg/m and vibrating at a frequency of 616.5 Hz, the tension can be calculated as:
Tension (T) = (π²mLf²) / 4L²
where m is the linear density, f is the frequency, and L is the length of the string.
T = (π² × 7.11 × 10⁻⁴ × 1.14 × 616.5²) / 4 × 1.14²
T = 27.56 N
Therefore, when the fourth loud point is reached, the tension in the string is 27.56 N.
Learn more about standing waves here: https://brainly.com/question/30528641
#SPJ11
Give two definitions of the half-life and find its relation with
decay constant or disintegration constant λ (in time-1 unit).
Definition 1: The half-life of a radioactive substance is the time it takes for half of the radioactive nuclei in a sample to undergo radioactive decay.
Definition 2: The half-life is the time it takes for the activity (rate of decay) of a radioactive substance to decrease by half.
The relation between half-life and decay constant (λ) is given by:
t(1/2) = ln(2) / λ
In radioactive decay, the decay constant (λ) represents the probability of decay per unit time. It is a measure of how quickly the radioactive substance decays.
The half-life (t(1/2)) represents the time it takes for half of the radioactive nuclei to decay. It is a characteristic property of the radioactive substance.
The relationship between half-life and decay constant is derived from the exponential decay equation:
N(t) = N(0) * e^(-λt)
where N(t) is the number of radioactive nuclei remaining at time t, N(0) is the initial number of radioactive nuclei, e is the base of the natural logarithm, λ is the decay constant, and t is the time.
To find the relation between half-life and decay constant, we can set N(t) equal to N(0)/2 (since it represents half of the initial number of nuclei) and solve for t:
N(0)/2 = N(0) * e^(-λt)
Dividing both sides by N(0) and taking the natural logarithm of both sides:
1/2 = e^(-λt)
Taking the natural logarithm of both sides again:
ln(1/2) = -λt
Using the property of logarithms (ln(a^b) = b * ln(a)):
ln(1/2) = ln(e^(-λt))
ln(1/2) = -λt * ln(e)
Since ln(e) = 1:
ln(1/2) = -λt
Solving for t:
t = ln(2) / λ
This equation shows the relation between the half-life (t(1/2)) and the decay constant (λ). The half-life is inversely proportional to the decay constant.
The half-life of a radioactive substance is the time it takes for half of the radioactive nuclei to decay. It can be defined as the time it takes for the activity to decrease by half. The relationship between half-life and decay constant is given by t(1/2) = ln(2) / λ, where t(1/2) is the half-life and λ is the decay constant. The half-life is inversely proportional to the decay constant.
To know more about radioactive substance visit
https://brainly.com/question/1160651
#SPJ11
A small plastic sphere with a charge of 3nC is near another small plastic sphere with a charge of 5nC. If they repel each other with a 5.6×10 −5
N force, what is the distance between them?
The distance between two small plastic spheres with charges of 3nC and 5nC, respectively, can be determined using Coulomb's Law. The distance between the two spheres is approximately 0.143 meters.
Given that they repel each other with a force of 5.6×10^−5 N, the distance between them is calculated to be approximately 0.143 meters. Coulomb's Law states that the force of attraction or repulsion between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
Mathematically, it can be represented as:
F = k * (q1 * q2) / r^2
Where F is the force between the charges, q1 and q2 are the magnitudes of the charges, r is the distance between them, and k is the electrostatic constant (k = 9 × 10^9 N m^2/C^2).
In this case, we are given the force between the spheres (F = 5.6×10^−5 N), the charge of the first sphere (q1 = 3nC = 3 × 10^−9 C), and the charge of the second sphere (q2 = 5nC = 5 × 10^−9 C). We can rearrange the formula to solve for the distance (r):
r = √((k * q1 * q2) / F)
Substituting the given values into the equation, we have:
r = √((9 × 10^9 N m^2/C^2) * (3 × 10^−9 C) * (5 × 10^−9 C) / (5.6×10^−5 N))
Simplifying the expression, we find:
r ≈ 0.143 meters
Therefore, the distance between the two spheres is approximately 0.143 meters.
Learn more about coulombs law click here: brainly.com/question/506926
#SPJ11
At what temperature must a hot reservoir operate in order to achieve a 30% Carnot efficiency when the cold reservoir operates at 200 °C?
The Carnot efficiency formula is given by : η=1-(Tc/Th), where η is the Carnot efficiency, Tc is the temperature of the cold reservoir and Th is the temperature of the hot reservoir.
In order to achieve a 30% Carnot efficiency when the cold reservoir operates at 200 °C, the hot reservoir must operate at 406.7 °C.The explanation:According to the Carnot efficiency formula, the Carnot efficiency is given by:η=1-(Tc/Th)where η is the Carnot efficiency,
Tc is the temperature of the cold reservoir and Th is the temperature of the hot reservoir.Substituting the given values, we get:0.3=1-(200/Th)0.3=Th/Th - 200/Th0.3=1-200/Th200/Th=0.7Th=200/0.7Th=285.7+121Th=406.7Thus, the hot reservoir must operate at 406.7 °C to achieve a 30% Carnot efficiency when the cold reservoir operates at 200 °C.
TO know more about that efficiency visit:
https://brainly.com/question/30861596
#SPJ11
Q. 137: Two lenses L₁ and L₂ are used to make a telescope. The larger lens L₁ is a convex lens with both surfaces having radius of curvature equal to 0.5 m. The smaller lens L₂ has two surfaces with radius of curvature 4 cm. Both the lenses are made of glass having refractive index 1.5. The two lenses are mounted in a tube with separation between them equal to 1 cm less than the sum of their focal length. (a) Find the position of the image formed by such a telescope for an object at a distance of 100 m from the objective lens L₁. (b) What is the size of the image if object is 1 m high? Do you think that lateral magnification is a useful way to characterize a telescope?
a) The image is 6.74 times larger than the object and is formed 6.74 times farther from the objective lens than the focal length.
b) The image is 6.74 times larger than the object and is formed 6.74 times farther from the objective lens than the focal length.
(a) Position of the image formed by such a telescope for an object at a distance of 100m from the objective lens L₁
The focal length of the convex lens L₁ can be obtained as follows:f = R/(n-1)
where R is the radius of curvature of the lens and n is the refractive index.
f = 0.5 m / (1.5 - 1) = 1 m
The distance between the two lenses is given as 1 cm less than the sum of their focal length. The focal length of the smaller lens L₂ is given as:
f₂ = R/(n-1) = 0.04m/(1.5-1) = 0.16 m
The distance between the lenses is given as (f₁ + f₂ - 0.01) = 1 + 0.16 - 0.01 = 1.15 m
Therefore, the magnification of the telescope is given by:
M = - v/u
where v is the image distance and u is the object distance.
u = -100 m, f₁ = 1 m, and f₂ = 0.16 m
Substituting in the formula,
M = - (f₁ + f₂ - d)/(f₂ * (f₁ + f₂ - d)/f₁ - d/u)
M = - (1.16 - 0.01)/((0.16 * (1.16 - 0.01))/1 - (-100)) = -6.74
We obtain a negative magnification because the image is inverted.
(b) Size of the image if object is 1m high
The height of the image is given by:
h₂ = M * h₁
where h₁ is the height of the objecth₁ = 1 m
Therefore, the height of the image is:
h₂ = -6.74 * 1 = -6.74 m
We obtain a negative height because the image is inverted.
Lateral magnification is a useful way to characterize a telescope as it provides information about the size and position of the image relative to the object. It helps to understand the quality of the image and how well the telescope is able to resolve details.
Learn more about focal-length at
https://brainly.com/question/24096929
#SPJ11
1. In nonrelativistic physics, the center of MASS of an isolated system moves with constant velocity. (This is also a statement of conservation of linear momentum.) In relativistic physics, the center of ENERGY moves with constant velocity. Consider a system of two particles. Particle A of mass 9m has its position given by xa(t)=(4/5)ct, while particle B of mass Sm is at rest at the origin, before they collide at time t=0. The two particles stick together after the collision. II Use relativistic physics to solve the problem of the system of two colliding particles. a) What is the position of the center of energy of the system before the collision? b) What is the velocity of the center of energy of the system before the collision? c) What is the mass (rest mass) of the final composite particle? d) What is the velocity of the final composite particle? e) What is the position xc(t) of the final particle after the collision? f) Compare the energy and momentum of the system before and after the collision.
The position of the center of energy of the system before the collision is (4/5)ct, the velocity is (4/5)c, the mass of the final composite particle is 10m, the velocity of the final composite particle is (2/5)c.
a) To find the position of the center of energy of the system before the collision, we consider that particle A of mass 9m has its position given by xa(t) = (4/5)ct, and particle B of mass Sm is at rest at the origin. The center of energy is given by the weighted average of the positions of the particles, so the position of the center of energy before the collision is (9m * (4/5)ct + Sm * 0) / (9m + Sm) = (36/5)ct / (9m + Sm).
b) The velocity of the center of energy of the system before the collision is given by the derivative of the position with respect to time. Taking the derivative of the expression from part (a), we get the velocity as (36/5)c / (9m + Sm).
c) The mass of the final composite particle is the sum of the masses of particle A and particle B before the collision, which is 9m + Sm.
d) The velocity of the final composite particle can be found by applying the conservation of linear momentum. Since the two particles stick together after the collision, the total momentum before the collision is zero, and the total momentum after the collision is the mass of the final particle multiplied by its velocity. Therefore, the velocity of the final composite particle is 0.
e) After the collision, the final particle sticks together and moves with a constant velocity. Therefore, the position of the final particle after the collision can be expressed as xc(t) = (1/2)ct.
f) Both energy and momentum are conserved in this system. Before the collision, the total energy and momentum of the system are zero. After the collision, the final composite particle has a rest mass energy, and its momentum is zero. So, the energy and momentum are conserved before and after the collision.
To learn more about energy -
brainly.com/question/32118995
#SPJ11
N 13. An electric field of 702 exists between parallel plates that are 30.0 cm apart. The potential difference between the plates is V. (Record your three-digit answer in the numerical-response section below.) Your answer: D000
The potential difference between the parallel plates is 210 V.
Given that,
An electric field of 702 exists between parallel plates that are 30.0 cm apart.
The potential difference between the plates is V.
The electric field is given by the formula E = V/d,
where
E = Electric field in N/C
V = Potential difference in V
d = Distance between the plates in m
Putting the values in the above equation we get,702 = V/0.3V = 210 V
Therefore, the potential difference between the plates is 210 V.
Hence, the potential difference between the parallel plates is 210 V.
Learn more about Electric field
brainly.com/question/11482745
#SPJ11
In an insulated vessel, 247 g of ice at 0°C is added to 635 g of water at 19.0°C. (Assume the latent heat of fusion of the water is 3.33 X 10 J/kg and the specific heat is 4,186 J/kg . C.) (a) What is the final temperature of the system? °C (b) How much ice remains when the system reaches equilibrium?
In an insulated vessel, 247 g of ice at 0°C is added to 635 g of water at 19.0°C. (Assume the latent heat of fusion of the water is 3.33 X 10⁵ J/kg and the specific heat is 4,186 J/kg .
(a) The final temperature of the system is -5.56°C.
(b) 0.247 kg ice remains when the system reaches equilibrium.
To solve this problem, we can use the principle of conservation of energy.
(a) To find the final temperature of the system, we need to calculate the amount of heat transferred from the water to the ice until they reach equilibrium.
The heat transferred from the water is given by:
[tex]Q_w_a_t_e_r = m_w_a_t_e_r * c_w_a_t_e_r * (T_f_i_n_a_l - T_w_a_t_e_r_i_n_i_t_i_a_l)[/tex]
The heat transferred to melt the ice is given by:
[tex]Q_i_c_e = m_i_c_e * L_f_u_s_i_o_n + m_i_c_e * c_i_c_e * (T_f_i_n_a_l - 0)[/tex]
The total heat transferred is equal to zero at equilibrium:
[tex]Q_w_a_t_e_ + Q_i_c_e = 0[/tex]
Substituting the known values:
[tex]m_w_a_t_e_r * c_w_a_t_e_r * (T_f_i_n_a_l - T_w_a_t_e_r_i_n_i_t_i_a_l)[/tex] +[tex]m_i_c_e * L_f_u_s_i_o_n + m_i_c_e * c_i_c_e * (T_f_i_n_a_l - 0)[/tex] = 0
Simplifying the equation and solving for [tex]T_f_i_n_a_l[/tex]:
[tex]T_f_i_n_a_l[/tex] = [tex][-(m_w_a_t_e_r * c_w_a_t_e_r * T_w_a_t_e_r_i_n_i_t_i_a_l + m_i_c_e * L_f_u_s_i_o_n)] / (m_w_a_t_e_r * c_w_a_t_e_r + m_i_c_e * c_i_c_e)[/tex]
Now, let's substitute the given values:
[tex]m_w_a_t_e_r[/tex] = 635 g = 0.635 kg
[tex]c_w_a_t_e_r[/tex] = 4186 J/kg·°C
[tex]T_w_a_t_e_r_i_n_i_t_i_a_l[/tex] = 19.0°C
[tex]m_i_c_e[/tex] = 247 g = 0.247 kg
[tex]L_f_u_s_i_o_n[/tex] = 3.33 × 10⁵ J/kg
[tex]c_i_c_e[/tex] = 2090 J/kg·°C
[tex]T_f_i_n_a_l[/tex] = [-(0.635 * 4186 * 19.0 + 0.247 * 3.33 × 10⁵)] / (0.635 * 4186 + 0.247 * 2090)
[tex]T_f_i_n_a_l[/tex] = -5.56°C
The final temperature of the system is approximately -5.56°C.
(b) To determine how much ice remains when the system reaches equilibrium, we need to calculate the amount of ice that has melted.
The mass of melted ice is given by:
[tex]m_m_e_l_t_e_d_i_c_e[/tex] = [tex]Q_i_c_e[/tex] / [tex]L_f_u_s_i_o_n[/tex]
Substituting the known values:
[tex]m_m_e_l_t_e_d_i_c_e[/tex] = ([tex]m_i_c_e[/tex] *[tex]L_f_u_s_i_o_n[/tex]) / [tex]L_f_u_s_i_o_n[/tex] = [tex]m_i_c_e[/tex]
Therefore, the mass of ice that remains when the system reaches equilibrium is equal to the initial mass of the ice:
[tex]m_r_e_m_a_i_n_i_n_g_i_c_e[/tex] = [tex]m_i_c_e[/tex] = 247 g = 0.247 kg
To know more about latent heat here
https://brainly.com/question/23976436
#SPJ4
A light ray traveling from air at an incident angle of 25° with the normal. The corresponding angle of refraction in glass was measured to be 16º. Find the refractive index (n) of glass. Use the value of n to find the speed of light in glass. (n for air = 1, Speed of light in air = 3x108 m/s = Equations Nair sin 01 = nglass sin O2, n = c/V
When a light ray travels from air at an incident angle of 25 degrees with the normal, and the corresponding angle of refraction in glass was measured to be 16 degrees. To find the refractive index (n) of glass, we need to use the formula:
Equation 1:
Nair sin 01 = n glass sin O2The given values are:
01 = 25 degreesO2
= 16 degrees Nair
= 1 We have to find n glass Substitute the given values in the above equation 1 and solve for n glass. n glass = [tex]Nair sin 01 / sin O2[/tex]
[tex]= 1 sin 25 / sin 16[/tex]
= 1.538 Therefore the refractive index of glass is 1.538.To find the speed of light in glass, we need to use the formula:
Equation 2:
[tex]n = c/V[/tex] where, n is the refractive index of the glass, c is the speed of light in air, and V is the speed of light in glass Substitute the given values in the above equation 2 and solve for V.[tex]1.538 = (3 x 108) / VV = (3 x 108) / 1.538[/tex]
Therefore, the speed of light in glass is[tex]1.953 x 108 m/s.[/tex]
To know more about incident visit:
https://brainly.com/question/14019899
#SPJ11