The table below lists the properties of a metallic element. Shiny, Silver colored, Forms +1 and +2 ions, compound with sulfur is bright red. Where on the periodic table would this element most likely be found?
Group 1
Group 2
Group 12
Group 13

Answer:

When volume is kept constant (kept the same), Gay-Lussac's law states that the pressure of gas varies directly with the temperature of the gas. The equation would be [tex]\frac{P1}{T1}=\frac{P2}{T2}[/tex], Where P is the pressure (in atm) and T is the temperature (in K°).

Explanation:

Answer:

When volume is kept constant (kept the same), Gay-Lussac's law states that the pressure of gas varies directly with the temperature of the gas. The equation would be , Where P is the pressure (in atm) and T is the temperature (in K°).

Explanation:

Answer:

The mass of nickel is 48μg

Explanation:

Parts per billion is a way to describe small concentrations and is defined as the ratio between μg of solute and kg of solvent.

If a solution of nickel in propanol is 20ppb, contains 20μg of nickel in 1 kg of propanol.

Thus, a sample of 2.4kg of propanol will contain:

2.4kg × (20μg nickel / 1kg) = 48μg nickel

Answer:

NH3 is the molecular formula of ammonia

Explanation:

i hope this will help you :)

Answer:

[tex]1.63 \times {10}^{24} [/tex]

one atom of an element = 6.02 \times {10}^{23} atom

The mass of one atom of sulphur = 32g

The mass of one atom of aluminium = 27g

so one atom of aluminium = 6.02 \times {10}^{23}

27g of AL = 6.02 \times {10}^{23} atom

2.70g of AL = X atoms

Then you cross multiply ........

and get the answer

.

Answer: Payback time = 0.0075

Explanation: Since payback time is calculated as:

payback time = [tex]\frac{installation cost}{annual savings}[/tex]

First determine the installation cost:

100 mm thick insulation covers 8.3 m². Then 300 mm covers 24.9 m².

To cover 8.3m² costs £20. Then, the cost to cover 24.9 m² is:

cost = [tex]\frac{20*24.9}{8.3}[/tex]

cost = £60

The cost of putting the insulation is £120, so the total cost is:

total cost = £60 + £120

total cost = £180

Savings per year per 100 mm thick is £80. For 300 mm, the value of annual savings is:

savings = [tex]\frac{300*80}{100}[/tex]

savings = 240

payback time = [tex]\frac{installation cost}{annual savings}[/tex]

payback time = [tex]\frac{180}{240}[/tex]

payback time = 0.75

Answer: The chemical formula for lead (II) iodide is [tex]PbI_2[/tex]

Explanation:

Lead (II) iodide is a ionic compound because it are formed by transference of electrons between metals and non metals.The bond formed between a metal and a non-metal is always ionic in nature.

For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.

The nomenclature of ionic compounds is given by:

1. Positive is written first followed by the oxidation state of metal in roman numerals in square brackets.

2. The negative ion is written next and a suffix is added at the end of the negative ion. The suffix written is '-ide'.

The chemical formula for lead (II) iodide is [tex]PbI_2[/tex]

Answer: The concentration of hydrogen ion is 2.5 x 10∧-3.

Explanation:

It is well known that; pH + pOH = 14

∴ pH + 11.40 = 14

  pH = 14 -11.40 = 2.60

Remember that,

pH = - Log [ H+ ]

2.60 = - log [H+]

To get the  hydrogen ion concentration, we take the anti-log of 2.60.

[H+] = Antilog 2.60 = 2.5 x 10∧-3.

Electrovalent compounds are those that are created when one or more electrons are transferred from one atom to another inside the compound. NaCl is an electrovalent substance because it shares an electron with other compounds to produce them.

A material created by chemically joining two or more distinct components. Examples of compounds are table salt (NaCl), which is generated from the elements sodium and chloride, and water (H2O), which is created from the components hydrogen and oxygen.

One carbon atom and two oxygen atoms combine to form carbon dioxide. One carbon dioxide molecule contains four covalent connections. Because neither carbon nor oxygen are metals, we can infer that carbon dioxide is a covalent molecule.

Pure substances known as compounds are created chemically when two or more elements are combined in a specific mass proportion. Chlorine and sodium combine to form sodium chloride (common salt).

Thus, sodium chloride is called an electrovalent compound whereas carbon dioxide is called covalent compound.

To learn more about compound, follow the link;

https://brainly.com/question/14117795

#SPJ2

Answer:Drinking straw

Explanation: my quiz said so

The object that represents the best model of one of the phloem cells is the drinking straw.

Phloem may be defined as a type of vascular tissue in plants that significantly conducts the passage of sugars and other metabolic products from the leaves to the roots. This mediates the migration of sugar which is synthesized in the leaves during photosynthesis.

Apart from this, the phloem also regulates the movement of nutrients from the roots to the upper part of the body. This function of phloem cells shares homology with the object known as a drinking straw that mediates the transport of any fluid in both directions.

Therefore, a drinking straw is an object that represents the best model of one of the phloem cells.

To learn more about Phloem cells, refer to the link:

https://brainly.com/question/3138900

#SPJ2

Your question seems incomplete. The most probable complete question is as follows:

Answer:

A is the answer.

Explanation:

The sound wave is a longitudinal wave which travels in the form of compression and rarefaction . The point where the particles are closer to each other is called compression and the point where the particles are far apart from each other is called rarefaction.

Answer:

Amplitude

Explanation:

Amplitude describes the displacement of the medium's particles. The higher the amplitude, the more dense it is, and the lower the amplitude, the less dense it is.

Pitch is incorrect because it describes the sound

Volume is incorrect because it describes the sound.

Wavelength is incorrect because it describes the distance between a period of a wave.

Answer:

Explanation:

its true

hope this helps

plz mark as brainliest!!!!!

Answer:

True

Explanation:

Answer:

D. 5,170 J

Explanation:

Answer:

Heating Fan is 75.33% efficient.

Explanation:

As it is mentioned that the given fan is a HEATING FAN, it means the it is used for provided heat (thermal energy) to the surrounding. Hence, its efficiency depends upon how much heat/thermal energy is provides.

We can state that.

Total Energy provided = 150 J

Useful Energy = 113 J

Wasted Energy = 37 J

The efficiency of the heating fan can be given by following formula:

Efficiency = ( Useful Energy / Total Energy ) × 100

Efficiency = ( 113 J / 150 J) × 100

Efficiency = (0.7533)× 100

Efficiency = 75.33%

Answer:

399

Explanation:

Pb(SO4)2 contains 1 atom of Pb, 2 atoms of S and 8 atoms of O. So, atomic mass of Pb(SO4)2 is 207 + 64 + 128 = 399 u. Therefore, molar mass of Pb(SO4)2 is 399 g/mol.HOPE THIS helps. Good Luck

Answer:

The molar mass of Pb(SO₄)₂ is 399.32.

Explanation:

To find the molar mass of Pb(SO₄)₂, you have to find the molar mass of each individual element that makes up the compound.

Let's start by figuring out how many of each element is present in the compound.

Pb (lead) - 1

S (sulfur) - 2

O (oxygen) - 8

(SO₄)₂ is a polyatomic ion. It is written in parentheses followed by a subscript of 2. This means that there are two sulfate ions in the compound. So, the number of sulfur atoms and oxygen atoms doubles. (1 × 2 = 2) and (4 × 2 = 8).

Next, look up the molar mass of each element on a periodic table and multiply it by the number of atoms present.

Pb - 207. 2 × 1 = 207. 2

S - 32.06 × 2 = 64.12

O - 16.00 × 8 = 128

Lastly, add up them all together to get the molar mass.

207. 2 + 64.12 + 128 = 399.32

Answer:

A chemical element

Explanation:

A chemical element consists of only one type of atom.

Answer:

D. Two or more elements or compounds that are mixed together but not chemically bonded.

Explanation:

Mixture is unique as it is not chemically bonded and individual entities such as elements or compounds keep their unique identities.

Answer:

Mixture consists of two or three elements or compounds that are mixed together but not chemically bonded.

Answer:

Ka = 9.2x10⁻⁷

Explanation:

The equilibrium of carbonic acid in water is:

H₂CO₃ ⇄ HCO₃⁻ + H⁺

Where Ka is defined as:

Ka = [HCO₃⁻] [H⁺] / [H₂CO₃]

The equilibrium concentration of the species is:

[H₂CO₃] = 1.9x10⁻² - X

[HCO₃⁻] = X

[H⁺] = X

As pH is -log[H⁺]

3.88 = -log[H⁺]

1.318x10⁻⁴ = [H⁺] = X

Replacing:

[H₂CO₃] = 1.9x10⁻² - 1.318x10⁻⁴ = 1.8868x10⁻²

[HCO₃⁻] = 1.318x10⁻⁴

[H⁺] = 1.318x10⁻⁴

Replacing in ka equation:

Ka = [1.318x10⁻⁴] [1.318x10⁻⁴] / [1.8868x10⁻²]

Answer: 9.2 x 10^-7

Explanation:

Answer:

The correct answer to the following question will be Option A (Microwaves).

Explanation:

The other given choices are not related to the given circumstances. So that option A seems to be the appropriate one.

Answer:

its a

Explanation:

Answer:

according to quantum physics newtons 3rd law is in the state of nuclear power things so the answer is c

Explanation:

according to quantum physics newtons 3rd law is in the state of nuclear power things so the answer is c

Answer:A

Explanation: Were there any living organisms is the answer because physics is the study of matter,its motion and behaviour of space and time and some other topics like energy and force.

Answer:

B

Explanation:

Forces and vectors on a probe are a physics thing

Answer:

40.47 g Al

Explanation:

In 1 mol of Al, there are 26.98 grams of Al, so Al is 26.98 g/mol.

Simply multiply 1.5 by 26.98 to get your answer.

Answer:

the answer is D.ice melting into water

Answer:

it is when a state in which opposing forces or influences are balanced.

A example of equilibrium is in economics  supply and demand are equal.

Explanation:

Answer:

Compromise of 1850

Explanation:

Answer:

[tex]L_{\text{fusion}[/tex] is latent heat of fusion.

Explanation:

[tex]Q=mL_{\text{fusion}}[/tex]

Here,

m is mass of substance

[tex]L_{\text{fusion}[/tex] is latent heat of fusion.

Answer:

[tex]\large \boxed{\text{104 kPa}}[/tex]

Explanation:

To solve this problem, we can use the Combined Gas Laws:

[tex]\dfrac{p_{1}V_{1} }{n_{1}T_{1}} = \dfrac{p_{2}V_{2} }{n_{2}T_{2}}[/tex]

Data:

p₁ = 748 kPa;  V₁ =   273 m³;  n₁ = n₁;  T₁ =  525 K

p₂ = ?;             V₂ = 1100. m³; n₂ =  n₁; T₂ =  293 K

Calculations:

[tex]\begin{array}{rcl}\dfrac{p_{1}V_{1}}{n_{1} T_{1}} & = & \dfrac{p_{2}V_{2}}{n_{2} T_{2}}\\\\\dfrac{\text{748 kPa}\times \text{273 m}^{3}}{n _{1}\times \text{525 K}} & = &\dfrac{p_{2}\times \text{1100. m}^{3}}{n _{1}\times \text{293 K}}\\\\\text{390.0 kPa} & = &3.754{p_{2}}\\p_{2} & = & \dfrac{\text{390.0 kPa}}{3.754}\\\\ & = & \textbf{104 kPa} \\\end{array}\\\text{The new pressure is $\large \boxed{\textbf{104 kPa}}$}[/tex]

The required  complete ionic equation of the reaction

Pb(NO3)2+2KI---->PbI2+2KNO3   is   Pb2+(aq) + 2 I−(aq) → PbI2(s)

A chemical equation in which the electrolytes in aqueous solution are expressed as dissociated ions.

Spectator ions in above equation are as follows- K +and NO3−

Define spectator ions.

Ions that are not involved in the actual chemical reaction are called spectator ions.

Net ionic equation of given reaction isPb⁺²+2I ⁻¹⟶PbI₂It shows only the ions which involves in the chemical reaction.

Therefore, K⁺ and NO3⁻ are spectator ions.

Learn more about spectator ions ,here:

https://brainly.com/question/22277121

#SPJ2  

Answer:

amoeba is the unicellular organism which can be seen by only microscope but not with our nacked eyes

Answer:

An amoeba often called an amoeboid, is a type of cell or unicellular organism which has the ability to alter its shape, primarily by extending and retracting pseudopods Amoebae do not form a single taxonomic group; instead, they are found in every major lineage of eukaryotic organisms. Amoeboid cells occur not only among the protozoa, but also in fungi, algae, and animals.

name of parts of ameoba

3 parts – the cytoplasm, plasma membrane and the nucleus. The cytoplasm can be differentiated into 2 layers – the outer ectoplasm and the inner endoplasm. The plasma membrane is a very thin, double-layered membrane composed of protein and lipid molecule

i hope this will help you

C.

move electrons from anode to cathode

Step-by-step Explanation

Electrical potential is the amount of energy that is available to move electrons from anode to cathode

Answer:

move electrons from anode to cathode

Explanation:

Plato

Answer:

The biological sample that pregnancy tests use to detect pregnancy is urine

Answer:

yes

Explanation:

the urine in the the tester will find hormones to determine if pregnant or not

Answer:

there is an increase by 0.18 V in the cell voltage.

Explanation:

The given equation of the reaction can be well written as

[tex]2AgCl_{(s)} + Zn _{(s)} \to 2Ag_{(s)} + 2 Cl^- _{(aq)}+ Zn^{2+}_{(aq)}[/tex]

By application of Nernst Equation ; we have the expression

[tex]E_{cell} = E^0- \dfrac{0,059}{n}log (\dfrac{[product]}{[reactant]})[/tex]

here in the above equation;

n = number of electrons transferred in the equation of the reaction

n = 2

Also;

[tex]E^0 = E_{cathode} - E_{anode}[/tex]

[tex]E^0 = E_{Ag^+/Ag} - E_{Zn^+/Zn}[/tex]

[tex]E^0 = +(0.80 \ V) - (-0..76 \ V)[/tex]

[tex]E^0 = (0.80 \ V +0..76 \ V)[/tex]

[tex]E^0 = 1.56 \ V[/tex]

If the zinc ion concentration is kept constant at 1 M; we have:

[tex]E_{cell} = E^0- \dfrac{0.059}{n}log (\dfrac{[product]}{[reactant]})[/tex]

[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[Zn^{2+} ]}{[Cl^{2-}]})[/tex]

[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log (1)[/tex]

Since log(1) = 0

Therefore;

[tex]E_{cell} = 1.56\ V[/tex]

When the chlorine ion concentration is decreased from 1 M to 0.001 M; we have;

[tex]E_{cell} = E^0- \dfrac{0.059}{n}log (\dfrac{[product]}{[reactant]})[/tex]

[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[Zn^{2+} ]}{[Cl^{2-}]})[/tex]

[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[1*0.001^2}]})[/tex]

[tex]E_{cell} = 1.56 - 0.0295 \ * \ log ({[1*10^{-6}}]})[/tex]

[tex]E_{cell} = + 1.737 \ V[/tex]

The change in voltage = [tex]E_{cell} - E^0[/tex]

=( 1.737 - 1.56 )V

= 0.177 V

≅ 0.18 V

Thus; from the following observation; there is an increase by 0.18 V in the cell voltage.

The voltage of the cell increased by 0.18 V.

The equation of the reaction is; 2AgCl(s) + Zn(s) → 2Ag(s) + 2Cl– + Zn2+

We know that;

E°cell = 1.36 - (-0.76) = 2.12 V

If the cells are both at 1M concentration the Ecell = E°cell = 2.12 V

When the concentration of Cl- decreased from 1 M to 0.001 M

Ecell =  E°cell - 0.0592/n log Q

Substituting values;

Ecell = 2.12 V -  0.0592/2 log (1 × (0.001)^2)

Ecell = 2.298 V

Increase in voltage = 2.298 V - 2.12 V = 0.18 V

Learn more: https://brainly.com/question/165414