The safe load, L, of a wooden beam supported at both ends varies jointly as the width, w, and the square of the depth, d, and inversely as the length, l. A wooden beam 9in. Wide, 8in. Deep, and 7ft long holds up 26542lb. What load would a beam 6in. Wide, 4in. Deep, and 19ft. Long, of the same material, support? Round your answer to the nearest integer if necessary.

The correct answer is a. 0. the mean difference score (µ d ) equals 0

In a correlated t-test, if the independent variable has no effect, the sample difference scores are expected to be a random sample from a population where the mean difference score (µd) equals 0.

When the independent variable has no effect, it means that there is no systematic difference between the two conditions or time points being compared. In this case, the average difference between the paired observations is expected to be zero, indicating no change or effect. Thus, the mean difference score (µd) is equal to 0.

Therefore, the correct answer is a. 0.

learn more about "Mean":-https://brainly.com/question/1136789

#SPJ11

From central limit theorem, in a sample

a) the sampling distribution of x is normal distribution.

b) The value of P(x>91.3) is equals to the 0.093418.

From the central limit theorem, when the samples of a population are considered then these generate a normal distribution of their own. The sample size must be equal to or higher than 30 in order for the central limit theorem to be true. We have a simple random sample obtained from population with the Sample size, n = 36

Population is skewed right with population mean, µ= 87

Standard deviations, σ = 24

We have to determine the sampling distribution of x.

a) As we see sample size, n = 36 > 30, so the sampling distribution is normal distribution.

b) Using the test statistic value for normal distribution, [tex]z= \frac{ x - \mu }{\frac{\sigma}{\sqrt{n}}} [/tex]. Here, x = 91.3, µ= 87, σ = 24, n = 36. Now, the probability value is, P(x>91.3)

= [tex]P( \frac{ x - \mu }{\frac{\sigma}{\sqrt{n}}} < \frac{ 91.3 - 87 }{\frac{24}{\sqrt{36}}}) [/tex]

= [tex]P(z < \frac{ 4.3}{\frac{24}{6}} )[/tex]

= [tex]P(z < \frac{ 4.3}{4} )[/tex]

= [tex]P(z < 1.32)[/tex]

Using the p-value calculator, the value P(z < 1.32) is equals to the 0.093418. So, P( x < 91.3 ) = 0.093418. Hence, required value is 0.093418.

For more information about central limit theorem,

https://brainly.com/question/13652429

#SPJ4

Complete question:

A simple random sample of size n=36 is obtained from a population that is skewed right with µ=87 and σ=24.

(a) describe the sampling distribution of x.

b) What is P(x>91.3)?

Here is a list of all the permutations of the set {a, b, c}. A permutation is an arrangement of elements in a specific order. Since there are three elements in this set, there will be a total of 3! (3 factorial) permutations, which is 3 × 2 × 1 = 6 permutations. Here they are:

1. abc
2. acb
3. bac
4. bca
5. cab
6. cba

These are all the possible permutations of the set {a, b, c}.

To know more about permutations, visit:

https://brainly.com/question/30649574

#SPJ11

Probability that a randomly selected pregnant woman has a length of pregnancy less than 260 days is approximately 0.0764 or 7.64%.

The length of pregnancy for a pregnant woman is a continuous random variable. The normal gestation period is between 37 and 42 weeks, which corresponds to 259 and 294 days. Assuming a normal distribution, we can use the mean and standard deviation of the gestation period to find the probability that a randomly selected pregnant woman has a length of pregnancy less than 260 days.

Let's assume that the mean length of pregnancy is μ = 280 days and the standard deviation is σ = 14 days.

We can use the standard normal distribution to find the probability of a value less than 260 days:

z = (260 - μ) / σ = (260 - 280) / 14 = -1.43

Using a standard normal distribution table or calculator, we can find that the probability of a standard normal variable being less than -1.43 is 0.0764.

Therefore, the probability that a randomly selected pregnant woman has a length of pregnancy less than 260 days is approximately 0.0764 or 7.64%.

To know more about Probability refer here

https://brainly.com/question/30034780#

#SPJ11

The length of the longer diagonal of the parallelogram is approximately 5.1 ft.

We have,

To find the length of the longer diagonal of the parallelogram, we can use the law of cosines.

The law of cosines states that in a triangle with side lengths a, b, and c, and angle C opposite side c, the following equation holds true:

c² = a² + b² - 2ab * cos(C)

In this case, we have side lengths AB = 4 ft and angle A = 30°, and we want to find the length of the longer diagonal.

Let's denote the longer diagonal as d.

Applying the law of cosines, we have:

d² = AB² + AB² - 2(AB)(AB) * cos(D)

d² = 4² + 4² - 2(4)(4) * cos(80°)

d² = 16 + 16 - 32 * cos(80°)

Using a calculator, we can calculate cos(80°) ≈ 0.1736:

d² = 16 + 16 - 32 * 0.1736

d² ≈ 16 + 16 - 5.5552

d² ≈ 26.4448

Taking the square root of both sides, we find:

d ≈ √26.4448

d ≈ 5.1427 ft (rounded to the nearest tenth)

Therefore,

The length of the longer diagonal of the parallelogram is approximately 5.1 ft.

Learn more about parallelograms here:

https://brainly.com/question/1563728

#SPJ12

Answer:

j

Step-by-step explanation:

For each of the problems, we will start by identifying the values of r and θ from the given complex number in rectangular form (a + bi).

1) (1 + i)
r = sqrt(1^2 + 1^2) = sqrt(2)
θ = tan^-1(1/1) = π/4
Therefore, the polar form of (1 + i) is:
sqrt(2) * (cos(π/4) + i sin(π/4)) = sqrt(2) * e^(iπ/4)
2) (-3 + 3i)
r = sqrt((-3)^2 + 3^2) = 3sqrt(2)
θ = tan^-1(3/-3) = -π/4 or 7π/4
Note that we have two possible values for θ because the point (-3, 3) falls in the second and fourth quadrants. We will use the value 7π/4 because it is the standard angle in the fourth quadrant.
Therefore, the polar form of (-3 + 3i) is:
3sqrt(2) * (cos(7π/4) + i sin(7π/4)) = -3sqrt(2) * e^(i7π/4)
3) (-2 - 2i)
r = sqrt((-2)^2 + (-2)^2) = 2sqrt(2)
θ = tan^-1(-2/-2) = π/4
Therefore, the polar form of (-2 - 2i) is:
2sqrt(2) * (cos(π/4) - i sin(π/4)) = 2sqrt(2) * e^(-iπ/4)
4) (4 - 4i)
r = sqrt(4^2 + (-4)^2) = 4sqrt(2)
θ = tan^-1(-4/4) = -π/4 or 7π/4
Again, we have two possible values for θ. We will use 7π/4 because it is the standard angle in the fourth quadrant.
Therefore, the polar form of (4 - 4i) is:
4sqrt(2) * (cos(7π/4) - i sin(7π/4)) = -4sqrt(2) * e^(i7π/4).

To know more about complex number visit:

https://brainly.com/question/20566728

#SPJ11

The number of slack variables in an initial tableau is equal to the number of "less than or equal to" constraints in the linear programming problem.

To determine how many slack variables are in an initial tableau, you need to consider the number of constraints in the linear programming problem. Here are the steps to follow:

Identify the number of constraints in the problem: These are the inequality constraints that typically involve "less than or equal to" (≤) or "greater than or equal to" (≥) symbols.

Assign a slack variable for each constraint: For each "less than or equal to" constraint, add a non-negative slack variable to convert the constraint into an equation. For each "greater than or equal to" constraint, you would add a non-negative surplus variable and an artificial variable.

Create the initial tableau: In the initial tableau, the columns will correspond to the decision variables, slack variables, and the objective function value (if needed). Each row will represent one constraint equation.

In summary, the number of slack variables in an initial tableau is equal to the number of "less than or equal to" constraints in the linear programming problem.

To know more about slack variables refer here :

https://brainly.com/question/31758747#

#SPJ11

To verify that the conclusion of Clairaut's theorem holds for f at the point (0,π/2), we need to check that the partial derivatives of f with respect to x and y are continuous at (0,π/2) and that they are equal at this point. Since e^(π/2) is not equal to π/2, the conclusion of Clairaut's theorem does not hold for f at the point (0,π/2).

First, let's find the partial derivative of f with respect to x:
∂f/∂x = yexy sin(y)
Now, let's find the partial derivative of f with respect to y:
∂f/∂y = exy cos(y) + exy sin(y)
At the point (0,π/2), we have:
∂f/∂x = π/2
∂f/∂y = e^(π/2)
Both partial derivatives exist and are continuous at (0,π/2).
To check that they are equal at this point, we can simply plug in the values:
∂f/∂y evaluated at (0,π/2) = e^(π/2)
∂f/∂x evaluated at (0,π/2) = π/2
Since e^(π/2) is not equal to π/2, the conclusion of Clairaut's theorem does not hold for f at the point (0,π/2).
To know more about Clairaut's theorem visit:

https://brainly.com/question/13513921

#SPJ11

The acceleration at t=10 seconds is approximately 0.2222 m/s^2.

Using Equation 23.9 of the book, we can calculate the acceleration at t=4 seconds and t=10 seconds as follows:

At t=4 seconds:

The first-order divided difference for velocity between t=2.5 and t=6.0 is:

f[t_2, t_1] = (V(t_2) - V(t_1))/(t_2 - t_1) = (18 - 15)/(6.0 - 2.5) = 1.7143 m/s^2

The first-order divided difference for velocity between t=1.0 and t=2.5 is:

f[t_1, t_0] = (V(t_1) - V(t_0))/(t_1 - t_0) = (15 - 10)/(2.5 - 1.0) = 10 m/s^2

The second-order divided difference for velocity between t=2.5, t=6.0, and t=1.0 is:

f[t_2, t_1, t_0] = (f[t_2, t_1] - f[t_1, t_0])/(t_2 - t_0) = (1.7143 - 10)/(6.0 - 1.0) = -1.6571 m/s^2

Therefore, the acceleration at t=4 seconds is approximately -1.6571 m/s^2.

At t=10 seconds:

The first-order divided difference for velocity between t=9.0 and t=12.0 is:

f[t_2, t_1] = (V(t_2) - V(t_1))/(t_2 - t_1) = (30 - 22)/(12.0 - 9.0) = 2.6667 m/s^2

The first-order divided difference for velocity between t=6.0 and t=9.0 is:

f[t_1, t_0] = (V(t_1) - V(t_0))/(t_1 - t_0) = (22 - 18)/(9.0 - 6.0) = 1.3333 m/s^2

The second-order divided difference for velocity between t=9.0, t=12.0, and t=6.0 is:

f[t_2, t_1, t_0] = (f[t_2, t_1] - f[t_1, t_0])/(t_2 - t_0) = (2.6667 - 1.3333)/(12.0 - 6.0) = 0.2222 m/s^2

Therefore, the acceleration at t=10 seconds is approximately 0.2222 m/s^2.

Learn more about acceleration here:

https://brainly.com/question/31946450

#SPJ11

The slope of the line tangent to the polar curve r=2sec2θ at the point θ=3π is Infinity that is the tangent to the curve in that point is perpendicular to X axis.

The given polar equation of the curve is, r = 2sec 2θ.

So the parametrized equations are:

x = r cosθ = 2sec2θcosθ

y = r sinθ = 2sec2θsinθ

differentiating with respect to 'θ' we get,

dx/dθ = 2 [sec2θ(-sinθ) + cosθ(sec2θtan2θ*2)] = 4cosθsec2θtan2θ - 2sec2θsinθ

dy/dθ = 2 [sec2θcosθ + sinθ(sec2θtan2θ*2)] = 4 sinθsec2θtan2θ + 2sec2θcosθ

So now,

dy/dx = (dy/dθ)/(dx/dθ) = (4 sinθsec2θtan2θ + 2sec2θcosθ)/(4cosθsec2θtan2θ - 2sec2θsinθ) = (2sinθtan2θ + cosθ)/(2cosθtan2θ - sinθ)

The slope of the curve is

= the value dy/dx at θ=3π

= {(2sinθtan2θ + cosθ)/(2cosθtan2θ - sinθ)} at θ=3π

= (2sin(3π)tan(6π) + cos(3π))/(2cos(3π)tan(6π) - sin(3π))

= (-1)/(0)

= infinity

So the slope of the polar curve at the point θ=3π is Infinity that is the tangent to the curve in that point is perpendicular to X axis.

To know more about slope here

https://brainly.com/question/31404185

#SPJ4

Answer: We can solve this problem using the standard normal distribution and standardizing the variable X.

Let Z be a standard normal variable, which is obtained by standardizing X as:

Z = (X - μ) / σ

where μ is the mean of X and σ is the standard deviation of X.

In this case, X is normal with mean μ = 3.6 and variance σ^2 = 0.01, so its standard deviation is σ = 0.1.

Then, we have:

Z = (X - 3.6) / 0.1

To find C such that P(X <= c) = 5%, we need to find the value of Z for which the cumulative distribution function (CDF) of the standard normal distribution equals 0.05. Using a standard normal table or calculator, we find that:

P(Z <= -1.645) = 0.05

Therefore:

(X - 3.6) / 0.1 = -1.645

X = -0.1645 * 0.1 + 3.6 = 3.58355

So C is approximately 3.5836.

To find C such that P(X > c) = 10%, we need to find the value of Z for which the CDF of the standard normal distribution equals 0.9. Using the same table or calculator, we find that:

P(Z > 1.28) = 0.1

Therefore:

(X - 3.6) / 0.1 = 1.28

X = 1.28 * 0.1 + 3.6 = 3.728

So C is approximately 3.728.

To find C such that P(-c < X < c) = 95%, we need to find the values of Z for which the CDF of the standard normal distribution equals 0.025 and 0.975, respectively. Using the same table or calculator, we find that:

P(Z < -1.96) = 0.025 and P(Z < 1.96) = 0.975

Therefore:

(X - 3.6) / 0.1 = -1.96 and (X - 3.6) / 0.1 = 1.96

Solving for X in each equation, we get:

X = -0.196 * 0.1 + 3.6 = 3.5804 and X = 1.96 * 0.1 + 3.6 = 3.836

So the interval (-c, c) is approximately (-0.216, 3.836).

Answer:

This is not possible, since probabilities cannot be negative. Therefore, there is no value of e that satisfies the given condition

Step-by-step explanation:

We can use the standard normal distribution to solve this problem by standardizing X to Z as follows:

Z = (X - μ) / σ = (X - 3.6) / 0.1

Then, we can use the standard normal distribution table or calculator to find the values of Z that correspond to the given probabilities.

P(X <= c) = P(Z <= (c - 3.6) / 0.1) = 0.05

Using a standard normal distribution table or calculator, we can find that the Z-score corresponding to the 5th percentile is -1.645. Therefore, we have:

(c - 3.6) / 0.1 = -1.645

Solving for c, we get:

c = 3.6 - 1.645 * 0.1 = 3.4355

So, the value of c such that P(X <= c) = 5% is approximately 3.4355.

Similarly, we can find the value of d such that P(X > d) = 10%. This is equivalent to finding the value of c such that P(X <= c) = 90%. Using the same approach as above, we have:

(d - 3.6) / 0.1 = 1.28 (the Z-score corresponding to the 90th percentile)

Solving for d, we get:

d = 3.6 + 1.28 * 0.1 = 3.728

So, the value of d such that P(X > d) = 10% is approximately 3.728.

Finally, we can find the value of e such that P(-e < X < e) = 90%. This is equivalent to finding the values of c and d such that P(X <= c) - P(X <= d) = 0.9. Using the values we found above, we have:

P(X <= c) - P(X <= d) = 0.05 - 0.1 = -0.05

This is not possible, since probabilities cannot be negative. Therefore, there is no value of e that satisfies the given condition

To Know more about standard normal distribution refer here

https://brainly.com/question/29509087#

#SPJ11

The probability that five rolls of a fair die will show exactly two threes using binomial distribution is 0.1612.

The binomial distribution can be used to calculate the probability of a specific number of successes in a fixed number of independent trials. In this case, the probability of rolling a three on a single die is 1/6, and the probability of not rolling a three is 5/6.

Let X be the number of threes rolled in five rolls of the die. Then, X follows a binomial distribution with parameters n=5 and p=1/6. The probability of exactly two threes is given by the binomial probability formula:

P(X = 2) = (5 choose 2) * (1/6)^2 * (5/6)^3 = 0.1612

where (5 choose 2) = 5! / (2! * 3!) = 10 is the number of ways to choose 2 rolls out of 5. Therefore, the probability that five rolls of a fair die will show exactly two threes using binomial distribution is 0.1612.

For more questions like Probability click the link below:

https://brainly.com/question/30034780

#SPJ11

China has experienced rapid economic growth since the late 1970s as a result of reforms that allowed more citizens to participate in free markets. This is the correct answer.

Central to this, these reforms encouraged people to create new businesses and entrepreneurial opportunities while also promoting foreign investment in China's economy, both of which fueled economic growth. After these reforms, China's economy began to grow rapidly, as the number of private firms and state-owned enterprises increased. The focus shifted to more sophisticated production, including high-tech manufacturing. It resulted in China becoming the world's factory, supplying a wide range of products to the global market. In the late 1970s, China began reforming its economy under Deng Xiaoping's leadership. This helped in improving China's economy.

To know more about economic growth visit:

https://brainly.com/question/11679822

#SPJ11

Answer:

D

Step-by-step explanation:

Took the quiz and its in the question. :p

To find the pattern in the given sequence, we can observe that each term increases by 3.

Using this pattern, we can determine the next terms of the sequence:

6, 9, 12, 15, 18, ...

So the first three terms are 6, 9, and 12.Starting with the first term, which is 6, we add 3 to get the second term: 6 + 3 = 9.

Similarly, we add 3 to the second term to get the third term: 9 + 3 = 12.

If we continue this pattern, we can find the next terms of the sequence by adding 3 to the previous term:

12 + 3 = 15

15 + 3 = 18

18 + 3 = 21

...

So, the sequence continues with 15, 18, 21, and so on, with each term obtained by adding 3 to the previous term.

Learn more about sequence Visit : brainly.com/question/7882626

#SPJ11

The lake 1 the widths, in feet, of a small lake were measured at 40 foot intervals. The area of the lake is approximately 50,000 square feet.

Find out the area of the lake, we need to use the width measurements that were taken at 40-foot intervals.

We can assume that the lake is roughly rectangular in shape, with each width measurement representing the width of the lake at that particular point.

To get an estimate of the area, we can calculate the average width of the lake by adding up all the width measurements and dividing by the total number of measurements.
For example, if there were 5 width measurements taken at intervals of 40 feet, we would add up all the measurements and divide by 5 to get the average width.

Let's say the measurements were 100 ft, 120 ft, 90 ft, 110 ft, and 80 ft. We would add these numbers together (100+120+90+110+80 = 500) and divide by 5 to get an average width of 100 feet.
Once we have the average width, we can estimate the length of the lake by using our best judgement based on the shape and size of the lake.

Let's say we estimate the length to be 500 feet. To calculate the area, we would multiply the length by the width:
Area = length x width
Area = 500 ft x 100 ft
Area = 50,000 square feet
So our estimate of the area of the lake is approximately 50,000 square feet.

Read more about Area of the lake.

https://brainly.com/question/17297122

#SPJ11

We need to know the area of the ramp in order to calculate the total cost of the material. Let's assume the ramp has a length of L feet and a width of W feet. Then the area of the ramp can be calculated as:

Area = Length x Width = L x W

We don't have any specific values for L and W, but let's assume that Santiago wants to build a ramp that is 10 feet long and 3 feet wide. In that case:

Area = 10 feet x 3 feet = 30 square feet

Now we can calculate the cost of building the ramp by multiplying the area by the cost per square foot:

Cost = Area x Cost per square foot = 30 square feet x $2.20/square foot

Cost = $66

Therefore, the cost of building the ramp with a length of 10 feet and a width of 3 feet, using material that costs $2.20 per square foot, would be $66.

Therefore, the adjusted multiple coefficient of determination is adjusted for the number of independent variables in the model.

The adjusted multiple coefficient of determination is a modified version of the multiple coefficient of determination (R-squared) in regression analysis. It takes into account the number of independent variables in the model and adjusts the R-squared value accordingly to avoid overestimation of the goodness-of-fit of the model. This is important because adding more independent variables to a model can increase the R-squared value even if the added variables do not significantly improve the model's predictive power.

To know more about coefficient of determination,

https://brainly.com/question/28975079

#SPJ11

The net signed area between the curve of the function f(x) = x - 1 and the x-axis over the interval [-7, 3] is -41.

To find the net signed area between the curve of the function f(x) = x - 1 and the x-axis over the interval [-7, 3], we need to integrate the function from -7 to 3 and take into account the signed area.

The integral of f(x) = x - 1 over the interval [-7, 3] is given by:

∫[-7, 3] (x - 1) dx

Evaluating this integral, we get:

[tex]∫[-7, 3] (x - 1) dx = [1/2 * x^2 - x] [-7, 3]\\= [(1/2 * 3^2 - 3) - (1/2 * (-7)^2 - (-7))][/tex]

= [(9/2 - 3) - (49/2 + 7)]

= [9/2 - 3 - 49/2 - 7]

= (-27/2) - (55/2)

= -82/2

= -41

To know more about integral, refer here:

https://brainly.com/question/31109342

#SPJ11

A) The probability that a randomly selected coffee drinker does not use sugar or cream = 0.10

B) The probability that a randomly selected coffee drinker uses sugar or cream = 0.90

People who uses cream in coffee = 70%

P(C) = 0.7

People who uses sugar in coffee = 55%

P(S) = 0.55

People who uses both in coffee and sugar = 35%

P(C or S ) = 0.35

Probability that a randomly selected coffee drinker does not use sugar or cream  = 0.10

Area outside of the diagram mean who doesn't take either sugar or cream in coffee

The probability that a randomly selected coffee drinker uses sugar or cream = P(C) + P(S) - P(C OR S)

= 0.70 + 0.55 - 0.35

= 0.90

To know more about probability click here :

https://brainly.com/question/30034780

#SPJ1

Given that we need to determine how the product of 5 and 0.3 can be determined using a given number line.From the given number line, we can observe that 0.3 is located at 3 tenths on the number line, we know that 5 is a whole number.

Therefore, the product of 5 and 0.3 can be determined by multiplying 5 by the distance between 0 and 0.3 on the number line. Each tick mark on the number line represents 0.1 units. So, the distance between 0 and 0.3 is 3 tenths or 0.3 units.

Therefore, the product of 5 and 0.3 is:5 × 0.3 = 1.5.The endpoint of the arrow that starts from 0 and ends at 0.3 indicates the value 0.3 on the number line. Therefore, the endpoint of an arrow that starts from 0 and ends at the product of 5 and 0.3, which is 1.5, can be obtained by making five jumps that are each unit long. This endpoint is represented by the tick mark that is 1.5 units away from 0 on the number line.

Know more about determine how the product of 5 and 0.3 here:

https://brainly.com/question/18886013

#SPJ11

Let Safe A have dimensions x, y, and z and Safe B have dimensions p, q, and r.

Since both the safes have the same volume; therefore,[tex]x * y * z = p * q *[/tex]rWe need to find the height of Safe B.Let's consider the height of Safe A to be h1 and the height of Safe B to be h2.According to the question, the volume of both safes is the same, thereforeh[tex]1 * y * z = h2 * q *[/tex] rDividing both sides by h2;h1 * y * z / h2 = q * r ...(1)Now, according to the question, both safes have different dimensions but the same volume; therefore,x * y * z = p * q * r => x / p = r / ySo, r = y * x / pSubstituting r in equation (1);[tex]h1 * y * z / h2 = q * (y * x / p) => h1 * y * z * p / (h2 * x) = q ... (h1 * y * z * a / h2 = q * x ... (* z * a = h2 * x[/tex]* bLet's assume that z = 1. Therefore, the height of Safe A is h1.Now, Safe A's dimensions are (x, y, 1) and Safe B's dimensions are (a, b, x * b / a).Both safes have the same volume. Therefore,[tex]x * y * 1 = a * b * (x * b / a) => y = b^2[/tex] / aTherefore, the height of Safe B is:[tex]q = h1 * z * a / (x * b) => h1 * a[/tex] / bAns: The height of Safe B is h1 * a / b.

To know more about the word dimensions visits :

https://brainly.com/question/28847716

#SPJ11

The function f(x) satisfying the given conditions is:

f'(x) = 5,

f(x) = 5x - 16.

To find the function f(x) satisfying the given conditions, we need to integrate f''(x) = 0 twice.

Since f''(x) = 0, integrating once gives us f'(x) = c1, where c1 is a constant of integration.

Given that f'(4) = 5, we can substitute this value into the equation:

c1 = 5.

Integrating f'(x) = 5 gives us f(x) = 5x + c2, where c2 is another constant of integration.

Given that f(3) = -1, we can substitute this value into the equation:

5(3) + c2 = -1,

15 + c2 = -1,

c2 = -16.

Know more about function f(x) here;

https://brainly.com/question/13461298

#SPJ11

Rounding to three decimal places, the probability is approximately 0.007.

To find the probability that the first two adults get news from television and the third gets news from the newspaper, we need to use the multiplication rule for independent events.
The probability of selecting an adult who gets news from television on the first draw is 13/75, since there are 13 adults who get news from television out of a total of 75 adults.
Assuming the first draw is an adult who gets news from television, there are now 12 adults who get news from television out of a total of 74 adults.

So the probability of selecting another adult who gets news from television on the second draw, given that the first draw was an adult who gets news from television, is 12/74.
Assuming the first two draws are adults who get news from television, there are now 14 adults who get news from a newspaper out of a total of 73 adults.

So the probability of selecting an adult who gets news from a newspaper on the third draw, given that the first two draws were adults who get news from television, is 14/73.
Therefore, the probability that the first two adults get news from television and the third gets news from the newspaper is:
(13/75) * (12/74) * (14/73) = 0.0067
For similar question on probability:

https://brainly.com/question/14210034

#SPJ11

Answer:

Step-by-step explanation:

The range of (X,Y) is the region where x+y<1 and x,y≥0. This forms a triangle with vertices at (0,0), (0,1), and (1,0).

To find c, we integrate the joint PDF over the range of (X,Y) and set it equal to 1. This gives us c=2. The marginal PDFs are found by integrating the joint PDF over the other variable.

fX(x) = ∫(0 to 1-x) (2x+1)dy = 2x + 1 - 2x² - x³, and fY(y) = ∫(0 to 1-y) (2y+1)dx = 2y + 1 - y² - 2y³.

To find P(Y<2X²), we integrate the joint PDF over the region where y<2x² and x+y<1. This gives us P(Y<2X²) = ∫(0 to 1/2) ∫(0 to √(y/2)) (2x+1) dx dy + ∫(1/2 to 1) ∫(0 to 1-y) (2x+1) dx dy = 13/24.

To know more about joint PDF click on below link:

https://brainly.com/question/31064509#

#SPJ11

The integral value is x = -3c1*(e^(3t/2)/2)(cos((sqrt(89)/2)t) + (sqrt(89)/2)sin((sqrt(89)/2)t)) - 3c2(e^(3t/2)/2)(sin((sqrt(89)/2)t) - (sqrt(89)/2)*cos((sqrt(89)/2)t)) + C

We have the following system of differential equations:

x' = x - 3y

y' = 3x + 7y

Substitution Method:

From the first equation, we have x' + 3y = x, which we can substitute into the second equation for x:

y' = 3(x' + 3y) + 7y

Simplifying, we get:

y' = 3x' + 16y

Now we have two first-order differential equations:

x' = x - 3y

y' = 3x' + 16y

We can solve for x in the first equation and substitute into the second equation:

x = x' + 3y

y' = 3(x' + 3y) + 16y

y' = 3x' + 25y

Now we have a single second-order differential equation for y:

y'' - 3y' - 25y = 0

The characteristic equation is:

r^2 - 3r - 25 = 0

Solving for r, we get:

r = (3 ± sqrt(89)i) / 2

The general solution for y is:

y = c1*e^(3t/2)cos((sqrt(89)/2)t) + c2e^(3t/2)*sin((sqrt(89)/2)t)

To find x, we can substitute this solution for y into the first equation and solve for x:

x' = x - 3(c1*e^(3t/2)cos((sqrt(89)/2)t) + c2e^(3t/2)*sin((sqrt(89)/2)t))

x' - x = -3c1*e^(3t/2)cos((sqrt(89)/2)t) - 3c2e^(3t/2)*sin((sqrt(89)/2)t)

This is a first-order linear differential equation that can be solved using an integrating factor:

IF = e^(-t)

Multiplying both sides by IF, we get:

(e^(-t)x)' = -3c1e^tcos((sqrt(89)/2)t) - 3c2e^t*sin((sqrt(89)/2)t)

Integrating both sides with respect to t, we get:

e^(-t)x = -3c1int(e^tcos((sqrt(89)/2)t) dt) - 3c2int(e^t*sin((sqrt(89)/2)t) dt) + C

Using integration by parts, we can solve the integrals on the right-hand side:

int(e^tcos((sqrt(89)/2)t) dt) = (e^t/2)(cos((sqrt(89)/2)t) + (sqrt(89)/2)*sin((sqrt(89)/2)t)) + C1

int(e^tsin((sqrt(89)/2)t) dt) = (e^t/2)(sin((sqrt(89)/2)t) - (sqrt(89)/2)*cos((sqrt(89)/2)t)) + C2

Substituting these integrals back into the equation for x, we get:

x = -3c1*(e^(3t/2)/2)(cos((sqrt(89)/2)t) + (sqrt(89)/2)sin((sqrt(89)/2)t)) - 3c2(e^(3t/2)/2)(sin((sqrt(89)/2)t) - (sqrt(89)/2)*cos((sqrt(89)/2)t)) + C

Learn more about integral here

https://brainly.com/question/30094386

#SPJ11

Let's solve the system of differential equations using three different methods: substitution method, operator method, and eigen-analysis method.

Substitution Method:

We have the following system of differential equations:

x' = x - 3y ...(1)

y' = 3x + 7y ...(2)

To solve this system using the substitution method, we can solve one equation for one variable and substitute it into the other equation.

From equation (1), we can rearrange it to solve for x:

x = x' + 3y ...(3)

Substituting equation (3) into equation (2), we get:

y' = 3(x' + 3y) + 7y

y' = 3x' + 16y ...(4)

Now, we have a new system of differential equations:

x' = x - 3y ...(3)

y' = 3x' + 16y ...(4)

We can now solve equations (3) and (4) simultaneously using standard techniques, such as separation of variables or integrating factors, to find the solutions for x and y.

Operator Method:

The operator method involves representing the system of differential equations using matrix notation and finding the eigenvalues and eigenvectors of the coefficient matrix.

Let's represent the system as a matrix equation:

X' = AX

where X = [x, y]^T is the vector of variables, and A is the coefficient matrix given by:

A = [[1, -3], [3, 7]]

To find the eigenvalues and eigenvectors of A, we solve the characteristic equation:

det(A - λI) = 0

where I is the identity matrix and λ is the eigenvalue. By solving the characteristic equation, we can obtain the eigenvalues and corresponding eigenvectors.

Eigen-analysis Method:

The eigen-analysis method involves diagonalizing the coefficient matrix A by finding a diagonal matrix D and a matrix P such that:

A = PDP^(-1)

where D contains the eigenvalues of A on the diagonal, and P contains the corresponding eigenvectors as columns.

By diagonalizing A, we can rewrite the system of differential equations in a new coordinate system, making it easier to solve.

To solve the system using the eigen-analysis method, we need to find the eigenvalues and eigenvectors of A, and then perform the necessary matrix operations to obtain the solutions.

Please note that the above methods outline the general approach to solving the system of differential equations. The specific calculations and solutions may vary depending on the values of the coefficients and initial conditions provided.

Know more about differential equations here:

https://brainly.com/question/31583235

#SPJ11

The shortest direct distance between the two points is the distance of the straight line that joins them.Evidence: To find the distance between the two points, we can use the distance formula, which is as follows:d = √[(x₂ - x₁)² + (y₂ - y₁)²]

where (x₁, y₁) and (x₂, y₂) are the coordinates of the two points and d is the distance between them.Substituting the given values in the formula, we get:d

= √[(9 - 12)² + (2 - 4)²]

= √[(-3)² + (-2)²]

= √(9 + 4)

= √13

Thus, the shortest direct distance between the two points is √13 miles.

Reasoning: Since it takes the rancher 10 minutes to travel one mile on horseback, he will take 10 × √13 ≈ 36.06 minutes to travel the entire distance between the two points. Rounding this off to the nearest minute, we get 36 minutes.

Therefore, the rancher will take approximately 36 minutes to travel the entire distance between the two points.

To know more about equation visit :-

https://brainly.com/question/29174899

#SPJ11

The conclusion, the availability of resources such as water, food, and shelter affects the populations of organisms in an ecosystem.

In an ecosystem, the availability of resources such as water, food, and shelter have an impact on the populations of organisms living in that ecosystem. Populations are affected by the availability of resources, including abiotic and biotic factors that help support their survival.

The interaction between different populations of organisms in the ecosystem is essential, which includes plants and animals living together. In the ecosystem, the food chain is the primary interaction where organisms eat other organisms to survive.

Organisms such as herbivores feed on plants and serve as food for carnivores. The availability of food is a significant factor that determines the population of herbivores and carnivores in an ecosystem. The ecosystem also depends on the availability of water, which is vital for the survival of all organisms. Lack of water can lead to a decrease in population, especially for organisms that are unable to survive in dry environments.
Additionally, the availability of shelter is also significant in determining the population of an organism in an ecosystem. The shelter can include caves, trees, and other structures that serve as protection for organisms. The availability of shelter can influence the number of organisms that can survive in the ecosystem.

Understanding how resources availability impacts populations of the organisms in an ecosystem is crucial in preserving the ecosystem. Ecosystems with a balanced population of organisms are considered healthy, while those with unbalanced populations of organisms are considered unhealthy.

To know more about ecosystem visit:

https://brainly.com/question/31459119

#SPJ11

The relative change in tuition for the University of Washington from 2015/16 to 2016/17 is -16.7%. This means that the tuition in 2016/17 decreased by 16.7%.

According to the provided source, Washington state implemented tuition cutbacks, which resulted in a decrease in tuition fees. To calculate the relative change in tuition, we need to determine the percentage change between the initial and final tuition amounts.

The relative change in tuition is given by the formula: (final tuition - initial tuition) / initial tuition * 100%.

From the source, it is stated that the tuition at the University of Washington decreased by $1,088 from 2015/16 to 2016/17. The initial tuition in 2015/16 is not specified in the given information.

Assuming the initial tuition is denoted as "T", we can calculate the relative change as follows:

Relative change = ($1,088 / T) * 100%

Since the percentage change is rounded to one decimal place and we are asked to provide the absolute value, the relative change in tuition is -16.7%. This indicates that the tuition in 2016/17 decreased by 16.7% compared to the initial tuition.

Learn more about percentage here:

https://brainly.com/question/16797504

#SPJ11