The question is listed in the image attached.

Answer:

The De Broglie hypothesis proposes that all matter exhibits wave-like properties and relates the observed wavelength of matter to its momentum. After Albert Einstein's photon theory became accepted, the question became whether this was true only for light or whether material objects also exhibited wave-like behavior.

Answer:

Mg + 2 HCl ⇒ MgCl₂ + H₂

10.1 L

Explanation:

Step 1: Write the balanced equation

Mg + 2 HCl ⇒ MgCl₂ + H₂

Step 2: Calculate the moles corresponding to 10.0 g of Mg

The molar mass of Mg is 24.31 g/mol.

10.0 g × 1 mol/24.31 g = 0.411 mol

Step 3: Calculate the moles of H₂ produced from 0.411 moles of Mg

The molar ratio of Mg to H₂ is 1:1. The moles of H₂ produced are 1/1 × 0.411 mol = 0.411 mol

Step 4: Calculate the volume occupied by 0.411 moles of H₂

0.411 moles of H₂ are at 1.00 atm and 25 °C (298 K). We can calculate the volume occupied using the ideal gas equation.

P × V = n × R × T

V = n × R × T / P

V = 0.411 mol × (0.0821 atm.L/mol.K) × 298 K / 1.00 atm = 10.1 L

Answer:

hi the ans is A.

..............

Answer:

A

Explanation:

A triglyceride (TG, triacylglycerol, TAG, or triacylglyceride) is an ester derived from glycerol and three fatty acids (from tri- and glyceride). Triglycerides are the main constituents of body fat in humans and other vertebrates, as well as vegetable fat.

The structure of option A shows a triglyceride.

Triglycerides are a kind of fat present in the blood. Triglycerides are the types of stored fats, which are not in use currently.

The structure of triglyceride is TRI esters containing glycerol bound to three fatty acid molecules.

Thus, the correct option is A.

Learn more about triglyceride

https://brainly.com/question/13840067

#SPJ2

Answer:

C. 2Fe + 3Cl2 + 2FeCl3

Explanation:

Hello there!

In this case, according to the given chemical reaction:

Fe + Cl2 → FeCl3

It turns out possible to balance it via cross-multiplying the chlorine atoms as they do not result from a whole number multiplication; it means we get:

Fe + 3Cl2 → 2FeCl3

And we just balance Fe by placing a 2 on Fe:

2Fe + 3Cl2 → 2FeCl3

Thus, the answer is C. 2Fe + 3Cl2 + 2FeCl3  

Regards!

Answer:

The answer would be charged particles.

Explanation:

Electric force exists as one of the most fundamental forces in the universe, it occurs between all charged particles.

Answer:

- Identify the acid and base in the reaction.

- What is left of the base after the reaction is known as the conjugate acid, while what is left of the acid after the reaction is known as the conjugate base.

Explanation:

Types of acids and bases:

When we are looking at conjugate acid and base, the type of acid and base we should focus on are Brønstead acid and base.

Brønsted acid: proton donor

Brønsted base: proton acceptor

Do note that proton here refers to hydrogen ion, H⁺.

Other types of acids and bases includes arrhenius acid/base and Lewis acid/base.

Definition:

Conjugate acid is what remains of the acid when a Brønsted acid donates a proton, while conjugate base is the newly formed protonated species when a Brønsted base accepts a proton.

Example:

Let's look at an example of a Brønsted acid-base reaction:

NH₃(aq) +H₂O(l) ⇌ NH₄⁺(aq) +OH⁻(aq)

Here, the base is NH₃ and the acid is H₂O.

NH₄⁺ is the conjugate acid, while OH⁻ is the conjugate base.

Note:

For a Brønsted acid- base reaction, whether a substance behaves as an acid or a base depends on what it is reacting with. Although H₂O behaves as an acid in this example, it behaves as a base when reacting with HCl.

Answer:

B

Explanation:

When two distinct elements are chemically combined—i.e., chemical bonds form between their atoms—the result is called a chemical compound. Most elements on Earth bond with other elements to form chemical compounds, such as sodium (Na) and Chloride (Cl), which combine to form table salt (NaCl).

MARK AS BRAINLEST!!

Answer:answer in explanation try to understand dear

Explanation:Air pollutants have a negative impact on plant growth, primarily through interfering with resource accumulation. Once leaves are in close contact with the atmosphere, many air pollutants, such as O3 and NOx, affect the metabolic function of the leaves and interfere with net carbon fixation by the plant canopy.

Answer:

I THINK IT IS TRUE  BECAUSE THEY ERE FIRST FOUND TO DEMOCRITUS ARISTOTLE AND PLATO THE ROMANS AND GREEK CHEMISTS .

Explanation:

Answer:

1.95cm x 1.95cm x 1.95cm

Explanation:

20.00g / 2.70g/mL = 7.41 mL = 7.41 cm^3

∛7.41 = 1.95cm

Answer:

1 - Salts required  that can be compared directly, using Ksp values, to estimate solubilities for copper (II) sulfide are - [tex]CaSO_3[/tex] (Option b) ,[tex]BaCrO_4[/tex] (Option c) and [tex]CaS[/tex] (Option d)

2 - Salts  that can be compared directly, using Ksp values, to estimate solubilities for zinc hydroxide are - [tex]Mg(OH)_2[/tex] (Option a)

Explanation:

[tex]K_s_p[/tex] values can be used to compare the solubility of salts that produce ions in a 1:1 ratio.

Because the salts [tex]CaSO_3[/tex] , [tex]BaCrO_4[/tex] and [tex]CaS[/tex]  have a 1:1 ion ratio, the solubilities of options b, c, and d can be compared to salt 1.

[tex]K_s_p[/tex] Values can be used to compare the solubility of salts that produce ions in a 1:2 or 2:1 ratio.

  2. [tex]Zn(OH)_2[/tex] dissociates into ions in ratio 1:2 .

Because the ions in the salt [tex]Mg(OH)_2[/tex] are in a 1:2 ratio, the solubility of salt 2 can be compared to that of salt 'a'.

Hence , Salt 1 is matched with options b , c , d.

              Salt 2 is matched with option a.

2K(s) + F₂(g) --> 2KF(s)

The physical stare of potassium is solid(s) and that of potassium fluoride is solid(s) so, s will be put on both the blanks.

Now, In order to balance florine, we will put 2 for potassium floride, afterwards florone will be 2 on both side of equation but now potasium will become unbalnced so, we will put 2 for potassium. Thus, both sides of the equation will be balanced.

--------------------------------------------------------

P.S- Sorry, If I fail in properly explaining it to you.

Answer:

2, 8, 10, 2

Explanation:

Answer:

2, 8, 10, 2

Explanation: Titanium/Electrons per shell

Answer:

bugging milftoon comic milftoon comic milftoon cimicd how many to summon a transgender milftoon cimicd how

We are given:

Initial Temperature = 90°c

Final Temperature = 120°c

Heat applied(ΔH) = 500 Joules

Specific heat(c) = 0.9 Joules / g°C

Mass of Aluminium(m) = ?

Change in temperature:

ΔT = Final temp. - Inital Temp.

ΔT = 120 - 90

ΔT = 30°c

Calculating the mass:

We know the formula:

ΔH = mcΔT

replacing the values:

500 = m(0.9)(30)

500 = m(27)

m = 500/27

m = 18.52 grams

Answer:6CO2/1C6H12O6

Explanation:

Answer:

O homogeneous mixture

Explanation:

When Kci is dissolved in water it becomes a solute in O homogeneous mixture

Answer: pH = 2.68

Explanation: pH = - log[H3O^+] .

 HCl reacts with water : HCl + H2O ->  Cl^- + H3O^+

So [H3O^+] = c(HCl) = 0.0021 M

pH = - log(0.0021) = 2.68

Answer: Resonance

Explanation:

A resonance is said to occur when an object experiences a frequency that is equal to its natural frequency.

A resonance refers to the sound that's produced by an object when the object vibrates at an identical rate as the sound waves that is coming from another object.

Therefore, the correct option is C

Answer:

0.244 M.

Explanation:

From the question given above, the following data were obtained:

Molarity of stock solution (M₁) = 1 M

Volume of stock solution (V₁) = 0.305 L

Volume of diluted solution (V₂) = 1.25 L

Molarity of diluted solution (M₂) =?

The molarity of the diluted solution can be obtained by using the dilution formula as illustrated below:

M₁V₁ = M₂V₂

1 × 0.305 = M₂ × 1.25

0.305 = M₂ × 1.25

Divide both side by 1.25

M₂ = 0.305 / 1.25

M₂ = 0.244 M

Thus, the molarity of the diluted solution is 0.244 M

Answer:

[tex]molar \: mass = 24g[/tex]

Answer:

Bottle B has a higher temperature than Bottle A.

Explanation:

We have to consider something very important here and that is the ability of the molecules of CO2 and those of air to trap heat.

CO2 molecules are better able to trap heat since it is among the green house gases.

Since CO2 is a greenhouse gas, the temperature of bottle B is higher than that of bottle A because more heat is trapped by the gas in bottle B than the gas in bottle A.

Answer:

The solubility of gases decreases with pressure as that of solids and liquids is not affected.

Answer:

7.3125grams

Explanation:

Molarity is the measure of the molar concentration of a solution. It can be calculated using the formula as follows:

Molarity = number of moles (n) ÷ volume (V)

Based on the information given,

Molarity = 1.25 M

Volume = 100 mL = 100/1000 = 0.1 L

Molarity = n/V

1.25 = n/0.1

n = 1.25 × 0.1

n = 0.125mol

Using the below formula to calculate the mass of NaCl;

mole = mass/molar mass

Molar mass of NaCl = 23 + 35.5 = 58.5g/mol

0.125 = mass/58.5

mass = 0.125 × 58.5

mass = 7.3125 grams

Answer:

Kind of like DNA or a part of DNA

Explanation:

They are what make you a person, no they aren't the same

Answer:  The coefficient we should change first is for [tex]NO_{3}[/tex].

Explanation:

The given reaction equation is as follows.

[tex]Al + Ni(NO_{3})_{2} \rightarrow Al(NO_{3})_{3} + Ni[/tex]

Here, number of atoms present on reactant side are as follows.

Number of atoms present on the product side are as follows.

To balance this equation, multiply Al by 2 and [tex]NO_{3}[/tex] by 3 on reactant side. Also, multiply [tex]Al(NO_{3})_{3}[/tex] by 2 and Ni by 3 on the product side.

Hence, the equation can be rewritten as follows.

[tex]2Al + 3Ni(NO_{3})_{2} \rightarrow 2Al(NO_{3})_{3} + 3Ni[/tex]

Now, number of atoms present on reactant side are as follows.

Number of atoms present on product side are as follows.

Since, the atoms on both reactant and product side are same. Hence, it is now a balanced chemical equation.

Thus, we can conclude that the coefficient we should change first is for [tex]NO_{3}[/tex].

Answer:

Carboxylic acid is an organic acid containing a carboxyl group. The simplest examples are methanoic (or formic) acid and ethanoic (or acetic) acid. It is  used in the production of polymers, biopolymers, coatings, adhesives, and pharmaceutical drugs. They also can be used as solvents, food additives, antimicrobials, and flavorings.

Explanation:

Hope that helps.