Answer:
36.3
Explanation:
The full answer would be 36.3426, but because of the 0.21, you round it down to 3 sig figs.
1. A teacher instructs her students to measure out 50.0 mL of hydrogen
peroxide for three trials of an experiment. A student measures out 37.2 mL,
38.7 mL, and 36.9 mL.
Use this information to answer the questions below (1a and 1b).
3 points
1a. Calculate the percent error for each measurement and include them
below. (For example: 1%, 2%, 3%) *
Answer:
by measuring the teacher gets to 1590
Explanation:
ndnmv drf
Please help me with this I’ve been on this question for 10 minutes now...
Answer:
A
Explanation:
we know that pangea was when all the continents were connected and the tectonic plates moved, causing pangea to split into multiple pieces. so north america was formed by moving tectonic plates.
i hope this helps :))
Which of the following properly explains what takes place when light hits polarized film?
A) The intensity of the light is simply dimmed
B)The planes of light become scattered
C)The scattered light has either the horizontal plane or the vertical plane blocked
D)The intensity of the light is brighten
Answer:
C)The scattered light has either the horizontal plane or the vertical plane blocked
Explanation:
When light becomes plane polarized, it means that light is made to vibrate in only one plane.
Light usually vibrate in vertical and horizontal directions but when light becomes polarized, either the vertical or horizontal direction is blocked and it is made to vibrate in only one direction
Ben makes five paper helicopters with different wing lengths. He drops them the same way from a height of two meters for five trials each. He records the amount of time it takes for each helicopter to fall to the ground. What is the independent variable?
Answer:
Wing length
Explanation:
According to the given excerpt, independent variable is 'wing length' and dependent variable is 'amount of time it takes for helicopter to hit the floor'.
Independent variable refers to the variable that do not undergo any change or shift in the course of the experiment of research. The other variables are measured using the constant independent variable. The value obtained from the independent variable is independent. On the other and, the dependent variable witnesses change with respect to the independent variable.
Matter is anything that takes up space and can be described by physical and chemical properties. Which statement
BEST differentiates chemical properties from physical properties?
A)
Physical properties are properties that can be physically seen or touched,
while chemical properties can only be found when matter is mixed with
specific chemicals.
B)
Physical properties are measured when matter changes its physical state,
while chemical properties can only be measured if matter remains in one
state for an extended time.
C)
Physical properties are difficult to measure because they require special
tools to detect, and chemical properties are easy to measure and require
not special tools to detect.
D)
Physical properties can be measured/observed without changing matter
into something else, while chemical properties describe matter's ability to
react/combine with other matter.
Answer:
D)
Physical properties can be measured/observed without changing matter
into something else, while chemical properties describe matter's ability to
react/combine with other matter.
Explanation:
Physical Change
The changes that occur only due to change in shape or physical properties but their chemical or internal composition remain unchanged.
1 = These changes were reversible.
2= They have same chemical property.
3= These changes can be observed with naked eye.
Example :
Water converting to Ice
Water converting to gas
In this water molecule remain the same only they rearrange themselves that change its state of mater not composition
Chemical change:
The changes, that occur due to change in the composition of a substance and result in a different compound is known as chemical change.
1 = These changes are irreversible
2 = These changes occur due to chemical reactions
3 = These may not be observed with naked eye
Example:
Combustion of fuel or wood: that oil or wood convert into energy, CO₂ and ash in case of wood
Boiling of egg: that change the chemical composition of protein in the egg .
The reaction of Hydrogen and oxygen:
H₂ (g) + O₂ (g) → 2H₂O (l)
Line M passes through the points (-5, 9) and (-1,9).
12
10-
8
6
2
-12-10-8-6-4-22
2
6 8 10 12 X
6
-10
-12-
Which is true of line M?
Answer:
line m is vertical line with an undefined slopel line correct answer is 6 8 10 12 x
What is the product of Na +CaSO4,
Answer:
Na + CaSO4 = Na2SO4 + Ca
Explanation:
single displacement (substitution)
A sound wave has a frequency of 20 Hz and a wavelength of 100 m. What is speed of the wave
The speed of a wave can be calculated using this formula:
v = f x λ
Where:
v is the wave speed in metres per second, m/s
f is the frequency in hertz, Hz
λ (lambda) is the wavelength in metres, m
Calculation:
Given:
f = 20 Hz
λ = 100m
Using the equation:
v = f x λ
v = 20 x 100
v = 2000 m/s
Therfore, the speed of the wave is 2000 m/s
A sound wave has a wavelength of 100 m and a frequency of 20 Hz. The wave's speed is 2× 10^3 m/s.
assuming frequency = 20 Hz and wavelength = 100 m
utilized concept: v= = 20×100 = 2×10³ m/s
Why is frequency important?The frequency in physics is the quantity of waves passing a fixed location in a unit of time. It also indicates how many cycles or vibrations a body in periodic motion experiences in a given unit of time.
How would you define sound?A sort of energy created by vibrations is sound. The molecules of the air surrounding an item vibrate as a result.. These molecules vibrate because they collide with nearby molecules, which also vibrate as a result.
To know more about Frequency, visit-
https://brainly.com/question/14316711
#SPJ2
Which of the following is the least likely to remain homogeneous?
. O A. All of these
O B. A supersaturated solution
O C. An unsaturated solution
O D. A saturated solution
Answer:
all
of them
Explanation:
Analyzing a blood sample usually involves which type of separation method?
screening
distillation
centrifugation
filtration
Answer:
the answer is b
Explanation:
i just did quizz
Which statement best describes insoluble substances? Insoluble substances remain the same when in water. Insoluble substances become part of the liquid substance. Water does not remain when an insoluble substance is added. Insoluble substances change from solid to liquid states.
Answer:
Insoluble substances remain the same when in water.
Explanation:
When a substance is regarded as insoluble, it means that the substance remains the same in water.
Soluble substances usually form one continuous phase with water when they are added to water (eg when salt is added to water).
However, when camphor is added to water, it does not form a single phase with water. It remains the same in the water and maintains a separate phase from the water. Hence camphor is an insoluble substance.
Is this correct?
If the temperature is below the melting point the substance is a solid
If the temperature is above the boiling point the substance is a gas
If the temperature is in between the boiling and melting points the substances a liquid.
If the normal melting point of a substance is below room temperature, the substance is a liquid at room temperature.
If both the normal melting point and the normal boiling point are above room temperature, the substance is a solid.
How is the nuclear structure of an atom similar to the non-nuclear structure?
Answer:
It has shells of protons and neutrons.
Explanation:
The nuclear structure of an atom is similar to the non-nuclear structure because has shells of protons and neutrons.
What is an atom?An atom consists of a central nucleus that is usually surrounded by one or more electrons.
The total number of neutrons plus protons in the same both before and after the nuclear process, although the total number of protons and the total number of neutrons may be different before and after.
Hence, the nuclear structure of an atom is similar to the non-nuclear structure because has shells of protons and neutrons.
Learn more about the atoms here:
https://brainly.com/question/1566330
#SPJ2
In an ionic bond
a. electrons are shared equally
b. protons are transferred
c. electrons are shared unequally
d. electrons are transferred
Answer: a chemical bond; in which one atom donates an electron to another atom
Explanation:
What is the oxidation number of Gallium?
Answer: +3
Explanation: Gallium liquefies just above room temperature. Gallium is a soft solid, however it quickly becomes liquid when heated.
Which option is an example of a chemical property?
A. boiling point
B. ability to react with oxygen
C. color
D. density
Answer:
boiling point
Explanation:
Option B
Differences in states of matter are determined by
particle type
particle arrangement
particle color
distance between particles
Answer:
particle distance
solids are tightly packed
liquids are a little farther apart
and gases are very far
a piece of metal has a mass of 1.3 g/cm and a has a volume of 24.9 cm3 what is its mass
Answer:
34.611g
Explanation:
mass of metal = ?
density of metal = 1.39/cm³
volume = 24.9 cm³
density = mass/volume
mass = density × volume
= 1.39g/cm³ × 24.9 cm³
= 34.611g
Are hemoglobin formation and functioning brains and muscles benefits of Iron?
How many atoms of aluminum are in a molecule of magnesium aluminum oxide (Al2MgO4)?
Answer:
12
Explanation:
A + ion (positive ion, one with extra positive charge)?
Answer:
If an ion has a positive charge then it has lost an electrons.
Explanation:
So you don't "gain" anything when the ion has a positive charge. It loses an electron which means it has more protons than electrons. Thus, the ion has a positive charge. If it "gained" an electron then it would have a negative charge.
The number of shovels and cost per 1000 kg for
Ca(OH)2
Answer:500
Explanation:
3. describe how unequal heating causes weather
Answer:
The uneven heating causes temperature differences, which in turn cause air currents (wind) to develop, which then move heat from where there is more heat (higher temperatures) to where there is less heat (lower temperatures).
Explanation:
what is the concept of the doppler effect?
HELP QUICK What is the mass of an object that has a volume of 2 ml and a density of 10g/ml?
Answer:
The answer is 20 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question we have
mass = 10 × 2
We have the final answer as
20 gHope this helps you
One of the uses of methanol (CH3OH) in dilute form is as a windshield washer antifreeze. In pure form, methanol has a molar concentration of 24.7M. How many moles are contained in 500 mL of solution?
Mole itself is the number of particles contained in a substance
1 mole = 6.02.10²³ particles
Mole : the ratio of the amount of substance mass and its molar mass
[tex]\large{\boxed{\boxed{\bold{mole=\frac{mass}{molar\:mass}}}}[/tex]
Molarity is a way to express the concentration of the solution
Molarity shows the number of moles of solute in every 1 liter of solute or mmol in each ml of solution
[tex]\large{\boxed {\bold {M ~ = ~ \frac {n} {V}}}[/tex]
Molar concentration of methanol=24.7 M
Volume of solution = 500 ml = 0.5 L
[tex]\tt mol=M\times V\\\\mol=24.7\times 0.5\\\\mol=12.35[/tex]
NEEEDDDD HELP ASAP PLZ PLZ PLZ PLZ PLZ HELP ME
Answer:
[tex]ns^2[/tex]
Explanation:
With radiocarbon dating, scientists compare an object's carbon-14 levels with _____. the carbon-14 levels of an object from the same time period carbon-14 levels in the atmosphere the carbon-14 levels in the rock surrounding the object the object's carbon-12 levels
Answer:carbon-14 levels in the atmosphere
Explanation:
When carrying out radiocarbon dating, the level of carbon-14 in a sample is compared with the level of carbon 14 in the atmosphere because, objects exchange carbon-14 with the atmosphere.
Comparison of the activities of carbon-14 in the atmosphere and in the sample gives the age of the sample since the half-life of carbon-14 is a constant.
what does MA 2 means?
Answer:
Master-at-Arms Petty Officer 2nd Class. MA2. Machine Accountant Second Class (Naval Rating) Copyright 1988-2018 AcronymFinder.com, All rights reserved.
Explanation:
I NEED HELP!!! How is continental crust different from oceanic crust?
Oceanic crust is thinner and more likely to sink.
Oceanic crust is thicker and more dense.
Continental crust is more dense and lighter.
Continental crust is thicker and more likely to sink.
Answer:
A
Explanation:
Oceanic crust is thinner and more likely to sink
Answer:
The answer is A Oceanic crust is thinner and more likely to sink.
Explanation:
I hope this is right sorry if it's not.