The product life cycle (PLC) is a concept that explains the cycle that a product undergoes, from introduction, growth, maturity, decline, and possible extinction.
The product life cycle theory is beneficial for manufacturers and marketers to predict and plan the product’s future phases. The statement "The product life cycle theory has many flaws, but it is still useful" is true This information helps them make informed decisions and develop effective strategies to improve the product.Second, the product life cycle theory serves as a reminder to manufacturers and marketers that products have a lifespan. This reminder helps companies plan for a product’s future.
Knowing that a product will eventually decline and become obsolete enables companies to plan for future products and explore new markets.Finally, the product life cycle theory helps companies understand that a product’s sales and popularity are not forever. T Furthermore, it serves as a reminder to companies that products have a lifespan and that sales and popularity are not forever. This knowledge enables companies to plan for the future, explore new markets, and innovate.
Learn more about product life cycle theory here:https://brainly.com/question/7510515
#SPJ11
Sam's Cat Hotel operates 52 weeks per year, 6 days per week, and uses a continuous review inventory system. It purchases kitty litter for $11.70 per bag. The following information is available about these bags.
Demand = 90 bags/week
Order Cost= $54/0rder
Annual Holding cost = 27% of cost
Desired cycle-service level = 80%
Lead time = 3 weeks (18 working days)
Standard deviation of weekly demand = 15 bags
Current on-hand inventory is 320 bags, with no open orders or backorders.
a. What is the EOQ? What would the average time between orders (in weeks)?
b. What should R be?
c. An inventory withdraw of 10 bags was just made. Is it time to reorder?
D. The store currently uses a lot size of 500 bags (i.e., Q=500). What is the annual holding cost of this policy? Annual ordering cost? Without calculating the EOQ, how can you conclude lot size is too large?
e. What would be the annual cost saved by shifting from the 500-bag lot size to the EOQ?
a. Average Time Between Orders = 510 bags / 4,680 bags/week ≈ 0.109 weeks
b. The reorder point should be approximately 289 bags.
c. Current Inventory Level = 320 bags + 0 bags - 10 bags = 310 bags
d. Annual Ordering Cost = (4,680 / 500) * $54/order ≈ $504.48
To solve these inventory To solve these inventory management questions, we can use the following formulas and calculations:
a. EOQ
Given:
Annual Demand = 90 bags/week * 52 weeks = 4,680 bags
Order Cost = $54/order
Annual Holding Cost = 27% of $11.70 = $3.16/bag
Plugging in the values:
EOQ = sqrt((2 * 4,680 * 54) / 3.16) ≈ 509.52 (rounded to the nearest whole number)
The EOQ is approximately 510 bags.
Average Time Between Orders = EOQ / Annual Demand
Average Time Between Orders = 510 bags / 4,680 bags/week ≈ 0.109 weeks
b. R (Reorder Point) can be calculated using the formula:
R = Lead Time Demand + Safety Stock
The desired cycle-service level is 80%, so the Z-score corresponding to that level can be found using a standard normal distribution table. Let's assume it is 1.28.
Standard Deviation of Weekly Demand = 15 bags
Lead Time Demand = Weekly Demand * Lead Time = 90 bags/week * 3 weeks = 270 bags
Plugging in the values:
Safety Stock = 1.28 * 15 bags ≈ 19.2 bags (rounded to the nearest whole number)
R = 270 bags + 19 bags ≈ 289 bags (rounded to the nearest whole number)
The reorder point should be approximately 289 bags.
c. After an inventory withdrawal of 10 bags, we need to check if it is time to reorder.
Current Inventory Level = On-Hand Inventory + Open Orders - Backorders
Current Inventory Level = 320 bags + 0 bags - 10 bags = 310 bags
d. we can use the following formulas:
Annual Holding Cost = (Q / 2) * Holding Cost per bag
Annual Ordering Cost = (Annual Demand / Q) * Order Cost
Plugging in the values:
Annual Holding Cost = (500 / 2) * $3.16/bag = $790
Annual Ordering Cost = (4,680 / 500) * $54/order ≈ $504.48
e. The annual cost saved by shifting from the 500-bag lot size to the EOQ can be calculated by finding the difference in annual holding and ordering costs.
Annual Cost Savings = Annual Holding Cost (500-bag lot size) - Annual Holding Cost (EOQ) + Annual Ordering Cost (500-bag lot size) - Annual Ordering Cost (EOQ)
a. EOQ (Economic Order Quantity) can be calculated using the formula:
EOQ = sqrt((2 * Annual Demand * Order Cost) / Annual Holding Cost)
Given:
Annual Demand = 90 bags/week * 52 weeks = 4,680 bags
Order Cost = $54/order
Annual Holding Cost = 27% of $11.70 = $3.16/bag
Plugging in the values:
EOQ = sqrt((2 * 4,680 * 54) / 3.16) ≈ 509.52
The EOQ is approximately 510 bags.
Average Time Between Orders = EOQ / Annual Demand
Average Time Between Orders = 510 bags / 4,680 bags/week ≈ 0.109 weeks
b. R (Reorder Point) can be calculated using the formula:
R = Lead Time Demand + Safety Stock
The desired cycle-service level is 80%, so the Z-score corresponding to that level can be found using a standard normal distribution table. Let's assume it is 1.28.
Standard Deviation of Weekly Demand = 15 bags
Lead Time Demand = Weekly Demand * Lead Time = 90 bags/week * 3 weeks = 270 bags
Plugging in the values:
Safety Stock = 1.28 * 15 bags ≈ 19.2 bags
R = 270 bags + 19 bags ≈ 289 bags
c.
Current Inventory Level = On-Hand Inventory + Open Orders - Backorders
Current Inventory Level = 320 bags + 0 bags - 10 bags = 310 bags
If the current inventory level falls below the reorder point (R), it is time to reorder. In this case, 310 bags < 289 bags, so it is not yet time to reorder.
d. we can use the following formulas:
Annual Holding Cost = (Q / 2) * Holding Cost per bag
Annual Ordering Cost = (Annual Demand / Q) * Order Cost
Plugging in the values:
Annual Holding Cost = (500 / 2) * $3.16/bag = $790
Annual Ordering Cost = (4,680 / 500) * $54/order ≈ $504.48
calculated by finding the difference in annual holding and ordering costs.
Annual Cost Savings = Annual Holding Cost (500-bag lot size) - Annual Holding Cost (EOQ) + Annual Ordering Cost (500-bag lot size) - Annual Ordering Cost (EOQ)
Substituting the values:
Annual Cost Savings = $
Learn more about management from
https://brainly.com/question/1276995
#SPJ11
Transcribed image text: 2. ABC LTD company looking to measure its productivity. If the output of last month's production was 500,000 units, and the total employees working in the organization are 500 and each employee work for 100 hours to complete this production. Price of per unit is SR 50. Calculate the productivity based on: (i) Production in each hour, (Formula: Production/total hours) (ii) Production from each employee, (Formula: Production/no. of employee) (iii) Revenue in each hour, and (Formula: Revenue/total hours) (iv) Revenue contributed by each employee. (Formula: Revenue/Total employees Answer:
Total revenue = SR 25,000,000 Total employees = 500 Therefore, Revenue contributed by each employee = 25,000,000 / 500 Revenue contributed by each employee = SR 50,000 Thus, each employee contributed SR 50,000 of revenue.
Productivity is defined as the ratio of output to input. It is the amount of production produced by a company in a specific period in response to a specific quantity of inputs, such as labor hours or machine hours. ABC LTD needs to evaluate its productivity, based on the provided details. The details are:Output of last month's production = 500,000 units Total employees working in the organization = 500 Each employee work for 100 hours to complete this production Price of per unit = SR 50 Based on these details, ABC LTD's productivity can be calculated as follows:Calculation of Productivity The total number of labor hours worked by all employees = Total number of employees × Hours worked by each employee Total labor hours worked by all employees = 500 × 100 = 50,000 hours Production in each hour can be calculated as:Production in each hour = Total Production / Total hours Total hours = Total labor hours worked by all employees = 50,000 hours Total Production = Output of last month's production = 500,000 units Therefore,Production in each hour = 500,000 / 50,000 Production in each hour = 10 units/hourThus, production in each hour was 10 units.For Production from each employee, the formula is:Production from each employee = Total Production / Total employees Total Production = 500,000 units Total employees = 500 Therefore,Production from each employee = 500,000 / 500 Production from each employee = 1,000 units/employee Thus, each employee produced 1,000 units.For Revenue in each hour, the formula is:Revenue in each hour = Total revenue / Total hours Total hours = Total labor hours worked by all employees = 50,000 hours Total revenue = Total Production × Price per unit = 500,000 × SR 50 = SR 25,000,000 Therefore,Revenue in each hour = 25,000,000 / 50,000 Revenue in each hour = SR 500/hourThus, the company generated SR 500 of revenue per hour.For Revenue contributed by each employee, the formula is:Revenue contributed by each employee = Total revenue / Total employees
To know more about Revenue visit:
https://brainly.com/question/32455692
#SPJ11
To prepare for this problem, read carefully the A Closer Look box on Natural Resources, the Environment, and the National Income Accounts. Then, answer the following questions. Let's say that a given nation has two options: Option One: Produce $68.0 million in output and generate no pollution. Option Two: Produce $80.0 million in output and generate $27.5 million in pollution. Under Option One, million will be added to GDP. (Round your answer to one decimal place.) Under Option Two, $ million will be added to GDP. (Round your answer to one decimal place.)
Under Option One, where $68.0 million in output is produced with no pollution, no million will be added to GDP.
This is because in the national income accounts, only market transactions are considered as additions to GDP. Since there is no pollution generated, which is not a market transaction, it does not contribute to GDP.
Under Option Two, where $80.0 million in output is produced and $27.5 million in pollution is generated, $80.0 million will be added to GDP. This is because the value of goods and services produced is included in GDP, regardless of any negative externalities such as pollution. However, it's important to note that GDP does not capture the negative impact of pollution on the overall well-being or sustainability of the economy and society. It only measures the market value of economic output.
Learn more about sustainability visit:
brainly.com/question/6184119
#SPJ11
Name and briefly explain what roles an Islamic Bank can play (at
least 5)
Islamic banks are financial institutions that operate under the Islamic law, which is known as Shariah. The main objective of these banks is to promote the principle of fair and just distribution of wealth. The Islamic Bank plays a vital role in the economy of a country by providing various financial services to people.
Some of the roles played by Islamic Banks are given below:
1. Deposit Collection : Islamic banks collect deposits from customers, including businesses, individuals, and governments. These deposits are used to provide loans to other customers, and the bank pays profits or returns to the depositors.
2. Investment and Financing : Islamic banks invest and finance in Shariah compliant businesses and projects. They ensure that the investments and financing comply with the Islamic principles. The bank shares profits and losses with the clients based on the agreed-upon terms.
3. Asset Management : Islamic banks manage assets on behalf of clients, including individuals, businesses, and governments. They manage investment portfolios and provide wealth management services.
4. Payment Services : Islamic banks offer various payment services, including electronic banking, debit cards, credit cards, and other financial instruments.
5. Social Responsibility : Islamic banks have social responsibilities towards the community, and they undertake various initiatives to promote social welfare and support the needy. They also contribute towards environmental sustainability and charity programs.
Learn more about Islamic banks at https://brainly.com/question/32743450
#SPJ11
A facility with a design capacity of 1,000 units, an actual average of 800 units, and effective capacity of 850 units has a utilization of O a. 125% O b. 94% O c. 85% O d. 80%
A facility with a design capacity of 1,000 units, an actual average of 800 units, and an effective capacity of 850 units has a utilization of 94% (Option b).Utilization is defined as the percentage of a facility's capacity that is being used. The formula for utilization is Actual Output / Design Capacity.
Here, the Design Capacity is 1,000 units, and the Actual Output is 800 units. Utilization = Actual Output / Design Capacity = 800 / 1000 = 0.8 or 80%However, the effective capacity of the facility is given as 850 units. This means that the facility can produce a maximum of 850 units under ideal conditions. But it is producing only 800 units on average. So, we need to recalculate the utilization using the Effective Capacity. Utilization = Actual Output / Effective Capacity = 800 / 850 ≈ 0.94 or 94%Therefore, the correct option is b) 94%.
To know more about Utilization visit:
https://brainly.com/question/32065153
#SPJ11
A manager checked production records and found that a worker produced 195 units while working 50 hours. In the previous week, the same worker produced 128 units while working 40 hours.
The manager checked the production records and found that a worker produced 195 units while working 50 hours. In the previous week, the same worker produced 128 units while working 40 hours. In the present week, the worker produced 195 units while working 50 hours.
To calculate the worker's productivity, we need to find the worker's productivity per hour of work. So,195 units produced ÷ 50 hours worked = 3.9 units per hour The worker produced 3.9 units per hour in the current week. In the previous week, the worker produced 128 units while working 40 hours. To calculate the worker's productivity in the previous week, we need to find the worker's productivity per hour of work.So,128 units produced ÷ 40 hours worked = 3.2 units per hour The worker produced 3.2 units per hour in the previous week. Therefore, we can conclude that the worker was more productive in the present week compared to the previous week as the productivity per hour of work increased from 3.2 units per hour to 3.9 units per hour.
To know more about production visit:
https://brainly.com/question/30333196
#SPJ11
$9000 coupon bond with a $400 coupon payment every year for 5 years has a coupon rate of A) 5 percent B) 8 percent C) 9 percent D) 4.4 percent
The coupon rate for a $9000 coupon bond with a $400 coupon payment every year for 5 years is D) 4.4 percent.
A coupon rate refers to the annual interest rate paid to a bondholder by a bond's issuer. It's the interest rate paid on a bond's face value in the form of an annual interest payment.
The formula for calculating the coupon rate is as follows:
Interest payment (coupon payment) every year / Bond's face value
The coupon rate of a $9000 coupon bond with a $400 coupon payment every year for 5 years is calculated as follows:
Interest payment (coupon payment) every year = $400
Bond's face value = $9000
The formula for calculating the coupon rate is:
Coupon rate = Annual coupon payment / Bond face value
Coupon rate = $400 / $9000Coupon rate = 0.044 or 4.4 percent
Therefore, the coupon rate for a $9000 coupon bond with a $400 coupon payment every year for 5 years is 4.4 percent.
To know more about Coupon visit :
brainly.com/question/29036738
#SPJ11
Ronnie received a monthly travel allowance of R3 800 per month, for the full year of assessment. During the current year of assessment, he travelled 16 200 kilometres for business purposes and a total of 40 000 kilometres for the current year of assessment. He spent R10 000 on Fuel, R3 000 on Maintenance, R5 000 on Insurance Premiums and R600 on License Fees. You can assume that the deemed cost per kilometre is correctly calculated to be R4.23 YOU ARE REQUIRED to calculate the Actual cost per kilometre.
To calculate the actual cost per kilometer, we need to determine the total expenses incurred for the business travel and divide it by the total distance traveled for business purposes.
Total expenses for business travel = Fuel + Maintenance + Insurance Premiums + License Fees = R10,000 + R3,000 + R5,000 + R600 = R18,600 Distance traveled for business purposes = 16,200 kilometers Actual cost per kilometer = Total expenses for business travel / Distance traveled for business purposes = R18,600 / 16,200 ≈ R1.1481 Therefore, the actual cost per kilometer is approximately R1.1481.
learn more about:- business purposes here
https://brainly.com/question/31007947
#SPJ11
Suppose the state of Maryland imposes a $2.00 per unit tax on the sellers of crabs. Because crabs are so delicious, consumers have few close substitutes. Sellers, on the other hand, can relatively easily shift to other products like oysters and fish. In other words, the demand for crabs is more inelastic than the supply of crabs. Who will ultimately pay the majority of this tax? O The buyers of crabs. O The sellers of crabs. Buyers and sellers pay an equal amount of the tax. There is not enough information provided to determine.
In this scenario, the demand for crabs is more inelastic than the supply of crabs. This means that buyers are less responsive to changes in price compared to sellers. When a tax is imposed on the sellers,
The majority of the tax burden will fall on the buyers of crabs. This is because the demand for crabs is more inelastic compared to the supply. When demand is inelastic, consumers are less responsive to changes in price, meaning they are willing to pay a higher price to satisfy their desire for crabs.Since sellers have the ability to shift to other products like oysters and fish, they have more flexibility in adjusting their supply. If the tax burden were to be imposed on the sellers, they could shift their production to other products with lower taxes, avoiding the burden of the tax.As a result, the sellers can pass on a significant portion of the tax burden to the buyers in the form of higher prices. The buyers, having limited close substitutes for crabs, are likely to continue purchasing crabs even at a higher price, leading to them ultimately paying the majority of the tax.
learn more about scenario here:
https://brainly.com/question/15367590
#SPJ11
sweet acacia commodities company signed a long-term noncancelable purchase commitment with a major vegetable supplier to
Sweet Acacia Commodities Company signed a long-term noncancelable purchase commitment with a major vegetable supplier to ensure a reliable source of raw materials for its new line of organic frozen dinners.
The purchase commitment is classified as an executory contract. An executory contract is a contract where one or both of the parties have not yet performed their contractual obligations. The commitment to purchase vegetables over a long-term means that Sweet Acacia is obligated to buy the minimum specified amount of vegetables at the predetermined price from the vegetable supplier. This contract will continue until the agreement's termination date, unless both parties mutually agree to an early termination. The noncancelable purchase commitment Sweet Acacia Commodities Company signed with the major vegetable supplier is a type of executory contract, where both parties haven't performed their contractual obligations yet.
The purchase commitment will continue until the termination date specified, and the minimum amount of vegetables specified in the contract has to be purchased by Sweet Acacia Commodities Company at the predetermined price.
To know more about contractual obligations visit:
brainly.com/question/30564850
#SPJ11
You have an investment that in today's dollars returns 15% of your investment in year 1, 12% in year two, 9% in year 3 and the remainder in year 4. What is the duration of this investment?
The term "duration of an investment" describes how long a person intends to retain a particular investment before selling or liquidating it. Depending on the investor's financial objectives, level of risk tolerance, and investing strategy, the duration may change. The duration of this investment is approximately 3.36 years.
To determine the duration of this investment, we need to calculate the weighted average of the time it takes to receive each portion of the return.
Using the formula for the weighted average duration, we get:
Duration = [(1*15) + (2*12) + (3*9) + (4*x)] / (15+12+9+x)
Where x is the percentage return in year 4.
Simplifying the equation, we get:
Duration = (63 + 4x) / (36 + x)
To solve for x, we know that the total return over the 4 years must add up to 100%. So:
15 + 12 + 9 + x = 100
x = 64
Plugging x back into the duration equation, we get:
Duration = (63 + 4(64)) / (36 + 64) = 3.36 years
Therefore, the duration of this investment is approximately 3.36 years.
To know more about Investments visit:
https://brainly.com/question/15105766
#SPJ11
Choose a business which is convenient to do from your home and discuss your opinion why it is going to be convenient and beneficial to run from your home.
Explain also the limitations or constraints you might face when you are going to run your business from your home.
One business that is convenient to run from home is an online tutoring service. It is convenient because it allows for flexibility in working hours, eliminates the need for commuting, and provides
the opportunity to utilize existing resources at home such as a quiet workspace, internet connection, and computer equipment. Additionally, running an online tutoring service from home can be cost-effective, as there are minimal overhead expenses compared to renting a separate commercial space.There are several benefits to running an online tutoring service from home. Firstly, it offers the convenience of working from a familiar environment and allows for a better work-life balance. Home-based businesses also have the advantage of reduced expenses, as there are no additional costs associated with renting or maintaining a physical office space. Moreover, the online nature of the business allows for a wider reach and the ability to cater to students from different locations.However, there are limitations and constraints to consider. One constraint is the potential lack of separation between work and personal life, as it can be challenging to create boundaries when working from home.
learn more about business here :
#SPJ11
Four different prefab-building locations have been suggested, of which only one will be selected. Cost and annual net cash- flow information are detailed in the table below. The annual net cash-flow series vary due to differences in maintenance, labour costs, transportation charges, etc. If the MARR is 10%, use ROR analysis to select the one economically-best location. Location Building cost, $ Annual cash flow, A B C D 200,000-275,000-190,000-350,000 $+22,000+35,000+19,500+42,000 Life, Years 30 30 30 30
Location D is economically the best choice based on the Rate of Return (ROR) analysis.
ROR analysis involves comparing the annual cash flows of different options to the initial investment to determine the rate of return. The option with the highest rate of return is considered economically the best choice. Location[tex]C: ROR_C = (19,500 / 190,000)^(1/30) - 1 = 0.0313[/tex] or 3.13% Location D: ROR_D = [tex](42,000 / 350,000)^(1/30) - 1 = 0.0326[/tex] or 3.26% Among the four options, Location D has the highest rate of return at 3.26%. Therefore, it is economically the best choice based on the ROR analysis, considering a MARR (Minimum Acceptable Rate of Return) of 10%.
learn more about:- Rate of Return here
https://brainly.com/question/17164328
#SPJ11
increases in the fraction of national debt held by foreigners _____ the burden of debt service on future generations _____.
The correct sentence would be: Increases in the fraction of national debt held by foreigners increase the burden of debt service on future generations.
Increases in the fraction of national debt held by foreigners increase the burden of debt service on future generations. This is because when the country borrows money from foreigners to finance the government's spending or to finance its operations, it has to repay them later. The more the country borrows from foreigners, the more it has to pay back. This increases the country's debt service burden on future generations. The foreign-held debt comes with a greater interest payment burden than if the debt were domestically held.
The reason behind this is that foreign investors usually expect higher interest rates on debt because they have less faith in a foreign country's ability to repay its debt. This means that the country has to pay higher interest rates to foreign investors, which increases the burden of debt service on future generations. Furthermore, when a country borrows too much from foreigners, it risks losing control over its own economy. The country becomes dependent on foreign investors to finance its operations, which can be problematic if these investors become less interested in holding the country's debt.
In conclusion, the increase in the fraction of national debt held by foreigners increases the burden of debt service on future generations.
To know more about National debt visit:
brainly.com/question/9096414
#SPJ11
Vertigo Corp. decides to construct its own factory Construction begins on January 1 2022. The company takes out a construction loan on 1/1122 for $400,000 with annual interest of 5% paid each 12/31 In addition to the construction loan, Vertigo Corp. has two general loans outstanding throughout 2022. as follows 8-year. $300.000, 4% Note Payable 12-year. $900.000,6% Loan Payable Vertigo Cor determines that for 2022 the company has weighted average accumulated expenditures of $500,000. Based on this information, how much interest should Vertigo Corp capitalize for this construction project in 2022?
Capitalization means adding an amount to the balance sheet rather than treating it as an expense on the income statement. An asset's cost includes interest on any loans or other borrowed funds used to finance the asset's construction, as well as other related costs, according to generally accepted accounting principles (GAAP).
Interest Capitalized = Weighted Average Accumulated Expenditures x Annual Interest Rate IN the given problem, the company takes out a construction loan on 1/1122 for $400,000 with annual interest of 5% paid each 12/31. Vertigo Corp. has two general loans outstanding throughout 2022, as follows 8-year. $300.000, 4% Note Payable 12-year. $900.000,6% Loan Payable. The company determines that for 2022, it has a weighted average accumulated expenditure of $500,000.To find out how much interest should be capitalized for this construction project in 2022, we need to calculate the Weighted Average Interest Rate.
For this, we can use the following formula: Weighted Average Interest Rate = Total Interest / Total Amount of Expenditures Total Interest = ($400,000 × 5%) + ($300,000 × 4%) + ($900,000 × 6%) = $20,000 + $12,000 + $54,000 = $86,000Total Amount of Expenditures = $500,000Weighted Average Interest Rate = $86,000 / $500,000 = 0.172So, Weighted Average Interest Rate = 17.2%Interest Capitalized = Weighted Average Accumulated Expenditures × Annual Interest Rate Interest Capitalized = $500,000 × 0.172 = $86,000Therefore, Vertigo Corp. should capitalize $86,000 interest for this construction project in 2022.
Read more about Capitalization here;https://brainly.com/question/25978421
#SPJ11
Question 23 The following are major cautions or criticisms of learning curves, except? O Learning rates may differ between organizations. O The base time must be carefully determined. O The curve may
The following are major cautions or criticisms of learning curves, except: Learning rates may differ between organizations. Thus, option A is the correct option.
The rate of improvement is often indicated as a percentage when describing a learning curve. A steeper slope in the learning curve's graphic depiction denotes initial learning that results in bigger cost savings, while successive learnings lead to slower, more challenging cost savings.
It cannot completely forecast the future curve - The learning curve can identify present skills but is not completely accurate in predicting what will happen in the future. False information - The learning curve is affected by factors including time, prior experience, training quality, etc.
Learn more about the Learning curve here:
https://brainly.com/question/10021119
#SPJ1
Ltd. is a factory located in a remote village. Recently, due to limited electricity supply, its production and sales volume has dropped from the normal level of 30,000 units to 8,000 units per month. A Ltd. was told that the electricity shortage will continue for the next 3 months; therefore, it is contemplating to close down the factory for the next 3 months. If it does close down the factory, its fixed manufacturing overhead costs will be reduced by $45,000 per month and its fixed selling costs will decrease by 10%. However, the factory restart after the 3-month closure will incur $8,000 in total. The current selling price of its product is $22 per unit, variable costs are $14 per unit, fixed manufacturing overhead costs are $150,000 per month, and fixed selling costs are $30,000 per month. Required: (Round to 2 decimal places, Show workings) (1) Should A Ltd. close down its factory for 3 months? Why? Support your answer with calculations
A Ltd. should not close down its factory for 3 months. To determine whether A Ltd. should close down its factory for 3 months, we need to compare the costs and benefits of doing so.
First, let's calculate the total cost per unit:
Total cost per unit = variable cost per unit + (fixed manufacturing overhead costs + fixed selling costs)/number of units produced
Total cost per unit = $14 + ($150,000 + $30,000)/30,000
Total cost per unit = $19
With the current selling price of $22 per unit, A Ltd. is making a profit of $3 per unit.
Now, let's consider the costs and benefits of closing down the factory for 3 months.
If A Ltd. closes down the factory for 3 months, it will save $45,000 per month in fixed manufacturing overhead costs and 10% of its fixed selling costs, which is $3,000 per month.
The total cost savings for the 3-month period would be:
Total cost savings = 3 x ($45,000 + $3,000)
Total cost savings = $144,000
However, A Ltd. will also incur a restart cost of $8,000 after the 3-month closure.
If A Ltd. continues production for the next 3 months, based on the current production level of 8,000 units per month, it will generate a total revenue of:
Total revenue = 8,000 x $22 x 3
Total revenue = $1,584,000
The total cost of producing 24,000 units during the 3-month period would be:
Total cost = 24,000 x $19
Total cost = $456,000
The profit generated from continuing production for the next 3 months would be:
Profit = Total revenue - Total cost
Profit = $1,584,000 - $456,000
Profit = $1,128,000
Based on the above calculations, it is more beneficial for A Ltd. to continue production for the next 3 months rather than closing down the factory. The profit generated from continuing production for the next 3 months is $1,128,000, which is higher than the cost savings from closing down the factory ($144,000) minus the restart cost of $8,000, which is a total of $136,000. Therefore, A Ltd. should not close down its factory for 3 months.
Learn more about costs here:
https://brainly.com/question/17120857
#SPJ11
1. Economic indicators analysis, for example: GDP
components, balance of payments, the exchange rate, inflation,
etc.
2. Financial system: banking industry and capital
markets"
Economic indicators analysis: Economic indicators analysis is a useful tool for understanding economic performance. These indicators can be divided into two categories: leading and lagging indicators.
Leading indicators are those that predict future economic trends, while lagging indicators are those that provide information about past economic trends. GDP components: Gross Domestic Product (GDP) measures the total value of goods and services produced within a country's borders during a specified time period. GDP has four main components: consumption, investment, government spending, and net exports. Balance of payments: The balance of payments is a record of all international transactions between a country and the rest of the world. It includes trade in goods and services, investment income, and transfers. Exchange rate: The exchange rate is the price of one currency in terms of another currency. It is determined by the supply and demand for each currency in the foreign exchange market. Inflation: Inflation is a sustained increase in the general price level of goods and services in an economy over a period of time. It is measured by the Consumer Price Index (CPI), which reflects the prices of a basket of goods and services. Financial system: The financial system comprises of the banking industry and capital markets. It is measured by the Consumer Price Index (CPI), which reflects the prices of a basket of goods and services. The financial system is essential for economic growth and development. The banking industry and capital markets play an important role in promoting economic growth and development. The banking industry is responsible for providing financial intermediation services, such as accepting deposits and providing loans. Capital markets, on the other hand, provide long-term financing through the issuance of equity and debt securities. The capital markets also facilitate secondary trading of securities and provide liquidity to investors.
learn more about economic
https://brainly.com/question/14355320
#SPJ11
What is meant by instrumentalization?
Why might humans have evolved a distaste for it? What does this
have to do with anti-market bias?
Instrumentalization refers to the act of using someone or something solely as a means to achieve an end or goal, treating them as a tool or object rather than recognizing their intrinsic value or dignity.
Humans may have evolved a distaste for instrumentalization due to several reasons, including social and ethical considerations. Here are some possible explanations:
Empathy and social bonds: Humans have evolved to form social connections and empathy towards others. Instrumentalizing individuals or objects can undermine these social bonds and lead to feelings of exploitation or dehumanization. Our innate sense of empathy may make us uncomfortable with treating others as mere instruments.Moral principles: Many moral frameworks emphasize the importance of treating others with respect and dignity. Instrumentalization conflicts with these moral principles, as it involves objectifying or exploiting individuals for personal gain or utility. This misalignment between instrumentalization and moral values can result in a distaste for such behavior.Cooperative instincts: Humans have a long history of cooperative behaviors, relying on collaboration and mutual assistance for survival and success. Instrumentalization can undermine cooperative dynamics by creating imbalances of power or compromising trust within social interactions. A distaste for instrumentalization may have evolved as a mechanism to preserve cooperation and maintain healthy social relationships.The connection between instrumentalization and anti-market bias is complex and multifaceted. Anti-market bias refers to a tendency to underestimate the benefits and efficiency of market mechanisms in allocating resources and generating economic outcomes. This bias can arise from various factors, including concerns about fairness, inequality, and negative perceptions of market competition.
Instrumentalization, in the context of anti-market bias, may contribute to negative attitudes towards markets. Critics of markets often argue that market transactions can lead to the instrumentalization of individuals or goods, reducing them to mere commodities to be bought and sold. This perspective sees markets as promoting a purely utilitarian view of human interactions, where everything has a price and value is solely determined by market forces.
However, it is important to note that markets, when functioning properly, also provide opportunities for voluntary exchange, specialization, and the satisfaction of individual preferences. While instrumentalization can be a concern in certain market contexts, a nuanced understanding acknowledges the potential for mutually beneficial transactions and the recognition of individual autonomy and dignity within market interactions.
To learn more about instrumentalization, Visit:
https://brainly.com/question/16236159
#SPJ11
What are the factors included in a cash flows analysis for evaluating capital investments? O Capital investment amount, operating expenses, revenue generated. O Sunk costs, operating expenses, revenue generated. Capital investment amount, manufacturing overhead, revenue generated. O Capital investment amount, operating expenses, asset turnover.
The factors included in a cash flows analysis for evaluating capital investments typically consist of the capital investment amount, operating expenses, and revenue generated.
When evaluating capital investments, a cash flows analysis is conducted to assess the financial viability of the investment. The factors included in this analysis are as follows:
1. Capital investment amount: This refers to the initial investment required to acquire the capital asset. It includes the purchase cost of the asset, installation costs, and any other expenses related to acquiring and setting up the asset.
2. Operating expenses: These are the ongoing costs associated with operating and maintaining the capital asset. This includes expenses such as labor costs, raw material costs, utilities, maintenance and repair costs, and any other costs directly related to the operation of the asset.
3. Revenue generated: This represents the inflows of cash generated by the capital asset over its useful life. It includes the income generated from the sale of products or services produced by the asset or any other revenue streams associated with its use.
By analyzing the cash flows associated with these factors, businesses can evaluate the profitability and financial feasibility of capital investments. It helps assess the expected returns and whether the investment will generate sufficient cash flows to cover the capital investment amount and operating expenses while generating a positive return on investment.
Learn more about cash flows here:
https://brainly.com/question/24179665
#SPJ11
Theory of perfect competition does not assume .........
A. Large quantity of sellers and buyers
B. Buyers and sellers to have all relevant information with respect to prices, product quality and sources of supply
C. firms to sell differentiated products
D. easy entry and exit from the market
Theory of perfect competition does not assume firms to sell differentiated products. Option -C is correct answer.
The theory of perfect competition assumes that there is a large number of sellers and buyers in the market, buyers and sellers have all relevant information regarding prices, product quality, and sources of supply, and there is easy entry and exit from the market. However, it does not assume that firms sell differentiated products. In perfect competition, products are homogeneous, meaning they are identical and indistinguishable from one another.
This assumption ensures that all firms in the market are price takers and have no control over the market price.
To know more about perfect competition visit:
https://brainly.com/question/28325480
#SPJ11
Betty contracted with Roger the Dodger Home Decorating Pty Ltd to redesign the interiors of her whole
house and complete the job in 3 months for $ 100,000. The job was completed on time, but about 25 % of it
was not finished properly with quite a few faults and it would cost another $ 20,000 to finish it off properly.
Betty refuses to pay anything to Rodger the Dodger who is demanding payment because he says he
completed the job on time.
Discuss the legal situation for both parties with reference to any relevant cases ( Corporation Act 2001 and please Use ILAC format)
Betty may have a valid claim to refuse payment for the unfinished and faulty portions of the job due to Roger the Dodger's failure to meet contractual obligations.
Issue: The main issue in this situation is the quality of the work performed by Roger the Dodger Home Decorating Pty Ltd. While the job was completed on time, there is a significant portion of the work that was not finished properly and contains multiple faults. Betty, the client, is refusing to pay the additional $20,000 that Roger the Dodger is demanding, arguing that the work needs to be completed properly.
Law: Under the Corporation Act 2001, a contract for services should be performed with due care and skill. If the work is not done with reasonable care and skill, the client may have a valid claim against the service provider.
Application: In this case, although the job was completed on time, 25% of it was not finished properly with multiple faults. This indicates that Roger the Dodger may have failed to fulfill the contract obligations by not providing services of reasonable quality. Betty, as the client, has the right to expect the work to be done properly.
Conclusion: Betty may have grounds to refuse payment for the unfinished and faulty portions of the job. She can argue that Roger the Dodger breached the contract by not completing the work with due care and skill. Betty may be entitled to seek remedies such as having the faults rectified or receiving compensation for the cost of finishing the job properly. Relevant case law and the specific terms and conditions of the contract may further influence the outcome of the legal situation.
Learn more about contractual obligations here:
https://brainly.com/question/17218270
#SPJ11
4. Netflix's top managers decided to restructure the organization and required immediate implementation. According to the management of the change process, this type of implementation is called ......
The management of change process that is required to immediately implement restructuring within an organization, such as in the case of Netflix's top managers, is called Fast Change.
Fast Change refers to the quick implementation of a management change process, where the process is put into action without the standard delays and proper protocol for change implementation. This process is usually implemented in a crisis or an urgent situation requiring immediate change or action. In Fast Change, the management can decide to make swift changes and may choose to ignore resistance to change from their employees, as the changes have to be put into action urgently. This type of change process can be very disruptive to an organization and may lead to disengagement, low productivity, and confusion if not managed effectively. Therefore, a well-planned strategy is required to ensure that the process is efficient and that employees are well informed about the changes to avoid any misunderstandings.
To know more about managers, visit:
https://brainly.com/question/32633151
#SPJ11
in the dataset provided, what does the variable fs represent?
In the given dataset, the variable "fs" represents the sampling rate of the audio signal.
The sampling rate can be defined as the number of samples of the audio signal taken per second. The value of fs determines the frequency range that can be processed in the signal and the amount of data that can be stored. For example, a higher sampling rate means that the audio signal has more samples per second, providing the better sound quality and frequency range. A lower sampling rate indicates that the audio signal has fewer samples per second and has a limited frequency range.
To learn more about variable, visit:
https://brainly.com/question/17742788
#SPJ11
Section A (40 Marks. Please answer all 1i-iv questions in this section. 1i) What is discretionary fiscal impulse? - (5 marks) ii) Assuming the UK economy taxes and government spending at equilibrium level of output for 2021 is each £10 trillion, use the cyclically adjusted budget deficit formula [G(ye) – T(ye) = [G(yd) – T(y)] – alye - y)] to work out questions ‘a to d' below. (Hint: T = taxes net of transfers; and alpha (a) = 1; consumption and investment are assumed unchanged): ii(a) Derive and explain the kind of budget implemented by the UK government and by how much if actual output generated is £18.0 trillion (show all workings) - (10 marks) ii(b) Derive and explain the kind of budget implemented by the UK government and by how much if actual output generated is £6.Otrillion (show all workings) – (10 marks) (iii) Using the debt dynamics equation: ∆b = d + (r – Yy)b, discuss three options available to the government to balance the question 'ii(b) economy: (12 marks; i.e., 4 marks each) (iv) what is the least painful option in the answer you gave for question 'iii', and why? - (3 marks)
Discretionary fiscal impulse is the use of deliberate changes in taxation, government spending, or transfer payments to influence the direction of the economy.
ii(a)Derive and explain the kind of budget implemented by the UK government and by how much if actual output generated is £18.0 trillion (show all workings):
Cyclically adjusted budget deficit formula is given as: [G(ye) – T(ye) = [G(yd) – T(y)] – alye - y)]
Here,T(ye) = Taxes net of transfers = 10 trillion
Alpha (a) = 1
Consumption and investment are assumed to be unchanged
Y(e) = Ye = 10 trillion
Output generated = 18 trillion
Therefore,G(ye) = [G(yd) – T(y)] – alye - y] + T(ye) = [10-(18-y)]-10+(1*10)-y= -y-8 trillion
This is the budget deficit for the given output level. Since the budget deficit is negative, this implies that there is a budget surplus of 8 trillion by the UK government.
ii(b)Derive and explain the kind of budget implemented by the UK government and by how much if actual output generated is £6.Otrillion (show all workings):
Cyclically adjusted budget deficit formula is given as: [G(ye) – T(ye) = [G(yd) – T(y)] – alye - y)]Here,T(ye) = Taxes net of transfers = 10 trillion
Alpha (a) = 1
Consumption and investment are assumed to be unchanged
Y(e) = Ye = 10 trillion
Output generated = 6 trillion
Therefore,G(ye) = [G(yd) – T(y)] – alye - y] + T(ye) = [10-(6-y)]-10+(1*10)-y= -y+6 trillion
This is the budget surplus for the given output level. Since the budget surplus is positive, this implies that there is a budget deficit of 6 trillion by the UK government.
(iii)Three options available to the government to balance the question 'ii(b) economy are:
Government can increase taxes to balance the economy. It would be painful for the people of the country and would hurt the economic growth of the country. Government can reduce government spending to balance the economy. It would lead to lower investment by the government in the country, but would be less painful for people in the short term. Government can increase the supply of money in the economy. It would lead to inflation and be painful for people in the long term. (iv)The least painful option in the answer given for question 'iii' is to reduce government spending. It would lead to lower investment by the government in the country, but would be less painful for people in the short term. It would not hurt the economic growth of the country in the long term.
Learn more about the budget surplus: https://brainly.com/question/30774647
#SPJ11
A common method for shortening the project time is to Adding resources Schedule overtime O Subcontract an activity Both A and B are corred A, B, and C are all correct
A common method for shortening the project time is to Adding resources, Schedule overtime, Subcontract an activity. All three options A, B, and C are correct. These methods help to reduce the time taken to complete the project and meet the deadline on time.
However, adding resources will add costs to the project, which is not always desirable. The team can also add resources with extra equipment, personnel, or time to the activities. This will reduce the time taken to complete the project, which will reduce the project schedule and ultimately increase the overall project cost.Overtime is an approach that can help shorten the project duration. It can reduce the time taken to complete the project by increasing the number of hours worked by personnel.
It can also increase the productivity of the project team and help meet the project deadline. Subcontracting is another way to shorten the project schedule. Subcontracting an activity can reduce the time taken to complete the project and help meet the project deadline. It involves subcontracting a part of the project work to an outside party. In some cases, subcontracting can reduce the quality of the work or increase costs.
To know more about project visit :-
https://brainly.com/question/28572832
#SPJ11
Variable costing is more useful than absorption costing for:
i. Special order decisions
ii. Short term pricing of products
iii. Long term pricing of products
A.
i and ii
B.
ii
C.
i
D.
i, ii and iii
Variable costing is more useful than absorption costing for (C) i. special order decisions.
Variable costing treats fixed manufacturing overhead costs as period costs and only includes variable production costs (direct materials, direct labor, and variable manufacturing overhead) in the product cost. On the other hand, absorption costing allocates both variable and fixed manufacturing overhead costs to products.
i. Special order decisions: Variable costing is more useful in special order decisions because it allows managers to determine the incremental cost of producing additional units. By focusing on variable costs, managers can make informed decisions about accepting or rejecting special orders without considering the impact of fixed overhead costs that are not relevant to the decision.
ii. Short-term pricing of products: Variable costing is also more useful in short-term pricing decisions. By considering only variable costs, managers can better understand the cost behavior of products and set prices that cover variable expenses and contribute to short-term profitability.
iii. Long-term pricing of products: The statement does not mention long-term pricing decisions. As such, it cannot be concluded that variable costing is more useful than absorption costing for long-term pricing.
Learn more about Variable costing here:
https://brainly.com/question/31444464
#SPJ11
What is the best conflict resolution approach when the team have difference of opinions on the solutions to a critical path problem?
Group of answer choices
None of the above
Problem‐solving
Compromise
Withdrawal
Problem-solving through open communication and collaboration.
What approach fosters resolution of conflicting opinions?Conflict resolution in a team setting is crucial for effective problem-solving and decision-making. When faced with a critical path problem and differing opinions on potential solutions, the best approach is problem-solving. This approach encourages open communication, active listening, and collaboration among team members. It involves analyzing the problem, exploring various perspectives, and seeking a solution that integrates the best ideas from all parties involved.
Problem-solving as a conflict resolution approach promotes constructive dialogue and enables teams to harness the collective intelligence and creativity of its members. It encourages a spirit of collaboration and innovation, where diverse viewpoints are valued and considered in the pursuit of finding the best solution. By engaging in problem-solving, teams can build trust, strengthen relationships, and enhance their ability to overcome challenges effectively. This approach also helps in preventing further conflicts by addressing the root causes and finding mutually agreeable resolutions.
Learn more about resolution
brainly.com/question/27964189
#SPJ11
A firm has cost function c(L,K) = wL + rK with a production function p(L,K) = ALα Kβ. The firm wishes to produce P units. Set up the Lagrange equation and find the first order conditions.
The first-order conditions for the given function are AαKβ/λw = L and AβLαKβ-1/λr = K.
Cost function of a firmThe cost function of a firm is c(L, K) = wL + rK, where w is the wage rate, r is the rental rate, L is labor, and K is capital.
A production function is p(L, K) = ALα Kβ, where A is the total factor productivity, α is the capital’s elasticity of the production function, β is the labor’s elasticity of the production function. A firm wishes to produce P units by choosing the amount of labor and capital to hire.
The Lagrange equation is:L = ALα Kβ - λ(wL + rK - C)Where C is the cost function of a firm.λ is the Lagrange multiplier.α and β are the capital’s elasticity of the production function and labor’s elasticity of the production function, respectively.
Now we differentiate the equation L with respect to L, K, and λ.∂L/∂L = AαKβ - λw (1)∂L/∂K = AβLαKβ-1 - λr (2)∂L/∂λ = wL + rK - C (3)
Set Equations (1) and (2) equal to zero for the first-order condition.AαKβ/λw = L (4)AβLαKβ-1/λr = K (5)
By multiplying Equations (4) and (5), we get:
LK = Aα+βKβLα/λ²wr = P/λ²wrλ = [P/ALα+β Kβα]½
Substitute λ in Equations (4) and (5) to get the optimal choice of L and K:
L = α[P/ALα+β Kβα]½K = β[P/ALα+β Kβα]½
Set the optimal choice of L and K in Equation (3) to get the optimal price C*= ALα+β [P/ALα+β Kβα]½
In conclusion, the first-order conditions for the given function are AαKβ/λw = L and AβLαKβ-1/λr = K.
Know more about the Cost function
https://brainly.com/question/29358512
#SPJ11
Which one of the following is used most frequently for
production employees as a form of goal setting?
1) Central tendency.
2) Halo effect.
3) Regency.
4) Work standards.
The most appropriate answer for the form of goal setting used most frequently for production employees is option 4) Work standards.
Work standards refer to established benchmarks or expectations for performance that are commonly used in production and operational environments. These standards define the desired level of output, quality, efficiency, or other performance metrics that employees are expected to achieve. They provide a clear target for employees to work towards and are frequently used as a form of goal setting in production settings.
Central tendency, halo effect, and recency are not directly related to goal setting methods. Central tendency refers to the tendency to rate employees' performance in the middle range, avoiding extreme ratings. The halo effect occurs when an employee's overall evaluation is influenced by a single positive characteristic or trait. Recency bias is the tendency to give more weight to recent events or performance rather than considering the entire evaluation period. These concepts are more related to performance appraisal or evaluation processes rather than goal setting specifically.
To know more about organizational behavior, visit:
https://brainly.com/question/31663293
#SPJ11