The probability of Alex winning a game of chess with his high school classmates is 0.38, and the probability of his twin sister, Alice, winning a game of chess is 0.45 . Assuming that either one winning a game of chess with their classmates is independent of the other, what is the probability that at least one of them will win the next game of chess with their classmates? Note: If your final answer has up to four decimal places, enter your answer in the box below without rounding it. But if your final answer has more than four decimal places, then round the number to four decimal places.

The df values for the f-ratio for the axb interaction in this experiment would be 28.

To determine the df values for the f-ratio for the axb interaction in this experiment, we first need to calculate the total number of observations in the study. With 3 levels of factor a and 3 levels of factor b, there are a total of 9 possible treatment conditions. With a sample of n = 8 in each treatment condition, there are a total of 72 observations in the study.

Next, we need to calculate the degrees of freedom for the axb interaction. This can be done using the formula dfaxb = (a-1)(b-1)(n-1), where a is the number of levels of factor a, b is the number of levels of factor b, and n is the sample size.

In this case, a = 3, b = 3, and n = 8, so dfaxb = (3-1)(3-1)(8-1) = 2 x 2 x 7 = 28.

Therefore, the df values for the f-ratio for the axb interaction in this experiment would be 28. This indicates the amount of variability in the data that can be attributed to the interaction between factor a and factor b, after accounting for any main effects. A larger f-ratio with a corresponding smaller p-value would suggest a more significant interaction effect.

To know more about df values, refer to the link below:

https://brainly.com/question/28236335#

#SPJ11

This statement is false.

DeMorgan's laws are fundamental laws in propositional logic that show the relationship between negation, conjunction, and disjunction. Specifically, DeMorgan's laws state:

The negation of a conjunction is the disjunction of the negations: ¬(p ∧ q) ≡ ¬p ∨ ¬q

The negation of a disjunction is the conjunction of the negations: ¬(p ∨ q) ≡ ¬p ∧ ¬q

If the negation operator distributes over the conjunction and disjunction operators, then DeMorgan's laws are still valid. In fact, the distributive law of negation over conjunction and disjunction is sometimes called one of DeMorgan's laws. The distributive law states:

The negation of a conjunction is equivalent to the disjunction of the negations: ¬(p ∧ q) ≡ ¬p ∨ ¬q

The negation of a disjunction is equivalent to the conjunction negations: ¬(p ∨ q) ≡ ¬p ∧ ¬q

So, the distributive law of negation over conjunction and disjunction is a valid form of DeMorgan's laws.

To know more about DeMorgan's laws refer here:

https://brainly.com/question/13265106

#SPJ11

If the baker doubles the number of cups of batter used, b, you would expect the number of pancakes made, p, to double as well.

Explanation :Doubling the cups of batter used will increase the amount of batter available for making pancakes. Since each pancake requires a specific amount of batter, doubling the amount of batter available will mean that you can make twice as many pancakes as before. Therefore, you would expect the number of pancakes made, p, to double as well.

In order to make a pancake, which is a flat cake eaten for breakfast, you pour batter into a heated pan and fry it on both sides. Many individuals enjoy drizzling maple syrup over their pancakes before eating.

Although pancakes can be savoury, in the US they are typically served as a sweet morning item. The majority of pancakes are circular in shape, made with a batter of flour, eggs, milk, and butter, and cooked on a griddle that has been buttered. Pancakes have a rich history that dates at least to ancient Greece, and they may be found in many different forms around the world.

Know more about pancakes here:

https://brainly.com/question/29336106

#SPJ11

Total variation about a regression line, also known as total sum of squares (SST), is a measure of how much the data points deviate from the regression line.

It is represented by the formula SST = Σ(y - ȳ)², where y is the observed value, ȳ is the mean value, and Σ represents the sum of all values.

SST is a combination of two other measures: explained variation (SSE), which measures how much of the variation is explained by the regression line, and residual variation (SSR), which measures the unexplained variation.

SST can be decomposed into these two measures using the formula SST = SSE + SSR.

In other words, SST represents the total amount of variation in the data, both explained and unexplained, around the regression line.

Learn more about regression line at

https://brainly.com/question/7656407

#SPJ11

[tex]yp = Ae^x + Be^-x + Cx + D + Ex^2[/tex] is the assumed form of the particular solution for differential equation.

This is the assumed form of the particular solution for the differential equation [tex]y'' - y' = 7 + ex[/tex] using the method of undetermined coefficients. The coefficients A, B, C, D, and E are determined by substituting this form into the equation and solving for them.

A differential equation is a type of mathematical equation that explains how a function and its derivatives relate to one another. It is used to model a variety of physical events, including motion, growth, and decay, and it involves one or more derivatives of an unknown function. Differential equations can be categorised based on their order, which refers to the equation's highest order derivative. Depending on whether they incorporate one or more independent variables, they can also be categorised as ordinary or partial. Differential equations are a crucial component of the mathematical toolbox for modelling and analysing complicated systems and are utilised in many disciplines, including physics, engineering, economics, and biology.

Learn more about differential equation here:

https://brainly.com/question/31583235

#SPJ11

We can conclude that the solution of the equation `f(x) = -3x + 1` when `f(x) = -5` is `x = 4/3`.

Given the function `f(x) = -3x + 1` and `f(x) = -5`, we are required to solve for x. Substituting f(x) = -5 in the function, we get,`-5 = -3x + 1`Adding 3x to both sides, we get,`3x - 5 + 1 = 0`Simplifying the left-hand side, we get,`3x - 4 = 0`Adding 4 to both sides, we get,`3x = 4`Dividing both sides by 3, we get,`x = 4/3`Therefore, the solution of the equation `f(x) = -3x + 1` when `f(x) = -5` is `x = 4/3`.Thus, we can conclude that the solution of the equation `f(x) = -3x + 1` when `f(x) = -5` is `x = 4/3`.

Learn more about Simplifying here,

https://brainly.com/question/28036586

#SPJ11

Two medical technologies that have helped to combat the spread of diseases in cities include:

Artificial intelligence

Telemedicine

There are different forms of medical technology that have helped in combatting diseases in cities. Some of these include artificial intelligence and telemedicine. Artificial intelligence has helped to combat diseases because the medical records of patients can be easily tracked and used in suggesting diagnoses to medical doctors.

Telemedicine has also helped as technological devices are used to deliver healthcare services in a fast and efficient manner.

Learn more about medical technologies here:

https://brainly.com/question/27709980

#SPJ4

The area of the rectangular piece of metal having a length of 10 inches and a width of 14 inches is 140 square inches. So the area of a rectangular piece of metal = 140 square inches.

To determine the area of a rectangular piece of metal, you need to multiply the length by the width.

Given,

Width of the rectangular piece of metal = 10 inches

Length of the rectangular piece of metal = 14 inches

We can use the formula for finding the area of a rectangle,

A = l x w (where A is the area of the rectangle, l is the length of the rectangle, and w is the width of the rectangle) to solve the given problem.

Area = length × width

= 14 × 10

= 140 square inches.

Since we are multiplying two lengths, the answer has square units. Therefore, the area is given in square inches. Thus, we can conclude that the area of the rectangular piece of metal is 140 square inches. This means the metal piece has a surface area of 140 square inches.

To know more about the rectangular piece, visit:

brainly.com/question/27445441

#SPJ11

Therefore, the correct option is d. $3,186.50. To calculate Phillipe's total investment, you need to find the total cost of the 50 shares of Green Energy and the 120 shares of TJH Small-Cap.

To find the total cost, you need to multiply the number of shares by the offer price (since the offer price is the price at which the shares can be purchased).

Then, you can add the two totals to get Phillipe's total investment. So, Phillipe's total investment is: $[(50 shares) × ($18.01 per share)] + [(120 shares) × ($19.05 per share)]=$900.50 + $2,286=$3,186.50Therefore, the correct option is d. $3,186.50.

To know more about number, click here

https://brainly.com/question/3589540

#SPJ11

The area of a rectangular field is given as 320 square meters, and its breadth is 16 meters. We need to find the perimeter of the rectangular field.

To find the perimeter of a rectangular field, we need to know both the length and the breadth of the field. In this case, we are given the breadth as 16 meters. Let's denote the length of the field as "L" meters.

The formula for the area of a rectangle is A = length * breadth. Given that the area is 320 square meters and the breadth is 16 meters, we can substitute these values into the formula to get:

320 = L * 16

To find the length, we can rearrange the equation as:

L = 320 / 16

L = 20 meters

Now that we have the length and the breadth of the field, we can calculate the perimeter using the formula:

Perimeter = 2 * (length + breadth)

Perimeter = 2 * (20 + 16)

Perimeter = 2 * 36

Perimeter = 72 meters

Therefore, the perimeter of the rectangular field is 72 meters.

Learn more about rectangular here:

https://brainly.com/question/21416050

#SPJ11

The x-component of the vector ⃗ is -9.98 and the y-component is 8.53.

We can find the x and y components of the vector ⃗ by using trigonometry. The magnitude of the vector is given as 13.1, and the direction of the vector is 50∘ counter-clockwise from the -axis. We can use the cosine and sine functions to find the x and y components, respectively.

cos(50∘) = -0.6428, sin(50∘) = 0.7660

x-component = magnitude x cos(50∘) = 13.1 x (-0.6428) = -9.98

y-component = magnitude x sin(50∘) = 13.1 x (0.7660) = 8.53

Therefore, the x-component of the vector ⃗ is -9.98, and the y-component is 8.53.

Learn more about vector here

https://brainly.com/question/25705666

#SPJ11

The x-component of the vector is approximately 8.375 and the y-component is approximately 9.955.

To find the x- and y-components of the vector, we can use trigonometry.

Given that the magnitude of the vector is 13.1 and the direction is 50° counter-clockwise from the - axis, we can determine the x- and y-components as follows:

The x-component (horizontal component) can be found using the formula:

x = magnitude * cos(angle)

x = 13.1 * cos(50°)

x ≈ 8.375

The y-component (vertical component) can be found using the formula:

y = magnitude * sin(angle)

y = 13.1 * sin(50°)

y ≈ 9.955

Know more about vector here:

https://brainly.com/question/29740341

#SPJ11

The set of points at which the function f(x, y) = xy/(8ex − y) is continuous is the set of all points (x, y) such that 8ex ≠ y.

To determine the set of points at which the function is continuous, we need to check if the limit of the function exists and is equal to the value of the function at that point.

Taking the limit of the function as (x,y) approaches (a,b) gives:

lim_(x,y)→(a,b) f(x,y) = lim_(x,y)→(a,b) xy/8ex-y

Using L'Hopital's rule, we can find that the limit is equal to [tex]ab/8e^(b-a)[/tex].

The function is continuous for all points (a,b) in [tex]R^2[/tex].

Learn more about set of points

brainly.com/question/7876320

#SPJ11

The correct answer is: Standard Deviation = 4.03.

To calculate the standard deviation of a set of data, you can use the following steps:

Calculate the mean (average) of the data.

Subtract the mean from each data point and square the result.

Calculate the mean of the squared differences.

Take the square root of the mean from step 3 to get the standard deviation.

Let's apply these steps to the data you provided: 23, 19, 28, 30, 22.

Step 1: Calculate the mean

Mean = (23 + 19 + 28 + 30 + 22) / 5 = 122 / 5 = 24.4

Step 2: Subtract the mean and square the result for each data point:

(23 - 24.4)² = 1.96

(19 - 24.4)² = 29.16

(28 - 24.4)² = 13.44

(30 - 24.4)² = 31.36

(22 - 24.4)² = 5.76

Step 3: Calculate the mean of the squared differences:

Mean of squared differences = (1.96 + 29.16 + 13.44 + 31.36 + 5.76) / 5 = 81.68 / 5 = 16.336

Step 4: Take the square root of the mean from step 3 to get the standard deviation:

Standard Deviation = √(16.336) ≈ 4.03

Therefore, the correct answer is: Standard Deviation = 4.03.

To know more about standard deviation refer to

https://brainly.com/question/14930619

#SPJ11

The diagonal line presented in a normal q-q plot output indicate a high r2 value. b. false.

Deviations away from the diagonal line presented in a normal Q-Q plot output do not necessarily indicate a high r2 value or a proper approximation by the multiple linear regression model. A normal Q-Q plot is a graphical technique for assessing whether or not a set of observations is approximately normally distributed. In this plot, the quantiles of the sample data are plotted against the corresponding quantiles of a standard normal distribution. If the points on the plot fall close to a straight diagonal line, then it suggests that the sample data is approximately normally distributed. However, deviations away from the diagonal line could indicate departures from normality, such as skewness, heavy tails, or outliers. These deviations could affect the validity of the multiple linear regression model and its assumptions, including normality, linearity, independence, and homoscedasticity. Therefore, it is important to check the residuals plots and other diagnostic tools to evaluate the assumptions and the fit of the model.

Learn more about diagonal line here

https://brainly.com/question/24820338

#SPJ11

False. Regression lines are not a collection of mean values of y for different values of x. They represent the best-fit line that minimizes the sum of the squared differences between the observed y-values and the predicted y-values.

To know more about  regression lines  refer here

https://brainly.com/question/765640

SPJ11

The corresponding joint probability distribution is:

X\Y 0 1

0 1/12 1/4

1 1/6 1/2

Since X and Y are independent, the joint probability distribution is simply the product of their marginal probability distributions:

f(x,y) = f(x) × f(y)

Therefore, we have:

f(0,0) = f(0) ×f(0) = (1/3) × (1/4) = 1/12

f(0,1) = f(0) × f(1) = (1/3) × (3/4) = 1/4

f(1,0) = f(1) × f(0) = (2/3) × (1/4) = 1/6

f(1,1) = f(1) ×f(1) = (2/3) × (3/4) = 1/2

Therefore, the corresponding joint probability distribution is:

X\Y 0 1

0 1/12 1/4

1 1/6 1/2

for such more question on probability distribution

https://brainly.com/question/14933246

#SPJ11

The answer is:

c. $54,306.52

The total amount paid in interest can be calculated using the formula:

Total Interest = Total Payments - Principal

where

Total Payments = Monthly Payment * Number of Payments

Number of Payments = Number of Years * 12

For a 15-year mortgage with a monthly payment of $850 and an interest rate of 6% compounded monthly, we have:

Number of Payments = 15 * 12 = 180

Monthly Interest Rate = 6% / 12 = 0.5%

Principal = Total Amount Borrowed = Monthly Payment * Number of Payments / (1 + Monthly Interest Rate)^Number of Payments = $136,910.10

Total Payments = $850 * 180 = $153,000

Total Interest = $153,000 - $136,910.10 = $16,089.90

Therefore, the answer is:

the answer is:

c. $54,306.52 (rounded to the nearest cent)

To know more about interest rate refer here:

https://brainly.com/question/14445709

#SPJ11

Based on the above, the ice cream that was made at a rate of 0.2 hours per batch.

To know the rate at which the ice cream was made in hours per batch, one need to divide the total time taken by the number of batches produced.

So:

Rate (hours per batch) = Total time / Number of batches

Note that:

the total time taken = 7.6 hours,

the number of batches produced = 38.

Hence:

Rate (hours per batch) = 7.6 hours / 38 batches

= 0.2 hours per batch

Therefore, the ice cream that was made at a rate of 0.2 hours per batch.

Learn more about rate  from

https://brainly.com/question/119866

#SPJ1

The standard error of estimate is 17.18.

a. To calculate the standard error of estimate (also known as the standard deviation of the residuals), we use the formula:

se = sqrt(SSE / (n - 2))

where SSE is the sum of squared errors (also known as the residual sum of squares), and n is the sample size (number of observations).

Substituting the given values, we get:

se = sqrt(2540 / (30 - 2)) = 17.18

Therefore, the standard error of estimate is 17.18.

To know more about standard error refer here:

https://brainly.com/question/13179711

#SPJ11

To write a for loop that displays the numbers 0, 10, 20, 30, 40, 50...1000, use the following code:

```python
for i in range(0, 1001, 10):
   print(i)
```

1. Start by creating a for loop using the `for` keyword.
2. Use the variable `i` as an iterator.
3. Utilize the `range()` function to generate a sequence of numbers.
4. Set the starting value of the range to 0, the end value to 1001 (since the end value is exclusive, it won't be included in the loop), and the step value to 10.
5. Inside the for loop, use the `print()` function to display the value of `i` for each iteration.
6. The for loop will iterate from 0 to 1000 (inclusive) with a step of 10, displaying the required sequence of numbers.

To know more about loop click on below link:

https://brainly.com/question/14390367#

#SPJ11

The other time when the car and the bus will be the same distance from the intersection is Δt units of time after their starting time (t=0), assuming their speeds remain equal throughout the journey.

To find the other time when the car and the bus will be the same distance from the intersection, we need to consider their respective rates of motion. Let's assume the car and the bus are moving in the same direction along a straight road.

Let's denote the distance of the car from the intersection at time t as "d_car(t)" and the distance of the bus from the intersection at time t as "d_bus(t)". We'll also denote their respective rates of motion as "v_car" and "v_bus".

Since the bus is even with the car at time t=0, we can set up the following equation:

d_car(0) = d_bus(0)

Now, let's consider the time when the car and the bus will be the same distance from the intersection. Let's call this time "t_match". At this time, we'll have:

d_car(t_match) = d_bus(t_match)

To find this time, we need to compare their rates of motion. If the car and the bus have different speeds, they will not remain the same distance apart. However, if their speeds are the same, they will remain at the same distance.

Therefore, for the car and the bus to be the same distance from the intersection at a later time, their speeds must be equal (v_car = v_bus).

If their speeds are equal, the other time when the vehicles will be the same distance from the intersection will be t_match = 0 + Δt, where Δt is the time it takes for both vehicles to travel the same distance.

In summary, the other time when the car and the bus will be the same distance from the intersection is Δt units of time after their starting time (t=0), assuming their speeds remain equal throughout the journey.

To know more about speed distance and time, visit:

https://brainly.com/question/31841408

#SPJ11

The total cost for a waiting line does NOT specifically depend on d. the cost of a lost customer.

The cost of a waiting line system is typically determined by the cost of waiting and the cost of providing service. The cost of waiting can include factors such as the value of customers' time and the negative impact of waiting on customer satisfaction. The cost of service can include factors such as employee wages and overhead costs. The number of units in the system can also have an impact on the total cost, as higher demand may require more resources and lead to longer wait times. However, the cost of a lost customer is not typically considered a direct cost of the waiting line system, as it is not directly related to the operation of the system itself but rather to the potential impact on business revenue and customer loyalty.

Learn more about customer here

https://brainly.com/question/12831236

#SPJ11

To find the height of the kite from the ground, we can use trigonometry and the given information.

Let's consider the right triangle formed by the kite string, the height of the kite, and the ground. The length of the kite string is the hypotenuse of the triangle, which is 80 units, and the angle between the kite string and the ground is 75 degrees.

Using the trigonometric function sine (sin), we can relate the angle and the sides of the right triangle:

sin(angle) = opposite / hypotenuse

In this case, the opposite side is the height of the kite, and the hypotenuse is the length of the kite string.

sin(75°) = height / 80

Now we can solve for the height by rearranging the equation:

height = sin(75°) * 80

Using a calculator, we find:

height ≈ 76.21

Therefore, the height of the kite from the ground is approximately 76.21 units.

Learn more about trigonometry Visit : brainly.com/question/25618616

#SPJ11

The sum of the first 7 terms of the sequence 4, 16, 64, ... is 87380.

The given sequence is a geometric sequence with a common ratio of 4. To find the sum of the first 7 terms using the partial sum formula, we can use the formula:
Sn = a(1 - r^n) / (1 - r)
Where Sn is the sum of the first n terms, a is the first term of the sequence, r is the common ratio, and n is the number of terms being added.
Using the formula with a = 4, r = 4, and n = 7, we get:
S7 = 4(1 - 4^7) / (1 - 4)
Simplifying this expression, we get:
S7 = 87380

Learn more about geometric here:

https://brainly.com/question/29113472

#SPJ11

Dr. Macmillan is in the process of standardizing the test.

In the given scenario, Dr. Macmillan designed a test to measure mathematical ability in college graduates. She is administering the test to a large representative sample of college graduates to establish a norm against which individual scores may be interpreted and compared. Dr. Macmillan is in the process of standardizing the test.

Standardizing the test is an essential process as it aims to make sure that the test is fair and consistent. The test should have standardized methods of administration and scoring, and a standard set of test questions. It is to ensure that the score obtained is an accurate representation of the person's abilities.

Standardizing the test is a crucial aspect of creating an assessment. It is a method to maintain uniformity and reliability in the test process. The purpose of standardizing a test is to ensure that the test is fair and consistent. A standardized test provides a standard set of test questions, standardized methods of administration and scoring. It makes sure that the score obtained is an accurate representation of the person's abilities and is comparable across different testing groups.

In this scenario, Dr. Macmillan is administering the test to a large representative sample of college graduates to establish a norm. Standardizing the test will help Dr. Macmillan to develop a reliable and valid test. It will help to control various factors that can influence the test scores. By standardizing the test, Dr. Macmillan will be able to ensure that all test-takers receive the same instructions and have an equal opportunity to perform on the test.

Standardizing a test is a complex process and takes a lot of time and effort. It is important to take care of various factors like test administration, test scoring, and item analysis. A well-standardized test is necessary for achieving the intended test objectives. It will help to ensure that the test scores are accurate, and the results obtained are dependable.

Dr. Macmillan is in the process of standardizing the test. Standardizing the test will ensure that the test is fair, consistent, and reliable. It will help to control various factors that can influence the test scores. A well-standardized test is necessary for achieving the intended test objectives. It will help to ensure that the test scores are accurate, and the results obtained are dependable.

To know more about well-standradized test visit:

brainly.com/question/17269215

#SPJ11

In the following sequence of numbers: 2, 3, 3, 4, 5, 6, 6, 6, 7, 7, 8, 8, 9, the mode is 6 since it appears three times, which is more often than any other number in the sequence.

A mode is a number that occurs the most number of times in a set of data. Since we are looking for the mode, then 2 should be the number that occurs most frequently on the cards. Here are the possible arrangements of numbers on the cards to satisfy the conditions stated above:
1. 2, 2, 1, 1, 3, 3
2. 2, 2, 1, 3, 3, 1
3. 2, 2, 3, 1, 1, 3
4. 2, 2, 3, 3, 1, 1
5. 2, 2, 3, 1, 3, 1
6. 2, 2, 1, 3, 1, 3
In all of these arrangements, each number (1, 2, and 3) appears at least once and the mode is 2 since it occurs twice on each card.What is a modeIn a set of data, mode refers to the most frequently occurring number. The mode is a measure of central tendency like mean and median. For example, in the following sequence of numbers: 2, 3, 3, 4, 5, 6, 6, 6, 7, 7, 8, 8, 9, the mode is 6 since it appears three times, which is more often than any other number in the sequence.

To know more about mode visit:

https://brainly.com/question/28566521

#SPJ11

The height of the pole is 43.8 feet.Answer: 43.8

At a distance of 34 feet from the base of a flag pole, the angle of elevation to the top of a flag is 48.6º. The angle of elevation to the bottom of the flag is 44.6 degrees. The flag is 5.1 feet tall and the pole extends 1 foot above the flag.The question asks to find the height of the pole.We have,Angle of elevation from the ground to the top of the flag, $$\theta_1 = 48.6°$$Angle of elevation from the ground to the bottom of the flag, $$\theta_2 = 44.6°$$Height of the flag, $$h = 5.1 feet$$Height of the pole above the flag, $$x = 1 foot$$Distance from the pole to the observer, $$d = 34 feet$$The height of the pole (y) can be found using trigonometric functions.Using tangent function, we have,$$\tan(\theta_1) = \frac{y + h + x}{d}$$On the given values, we get, $$\begin{aligned}\tan(48.6°) &= \frac{y + 5.1 + 1}{34} \\ \tan(48.6°) &= \frac{y + 6.1}{34} \\ y + 6.1 &= 34\tan(48.6°) \\ y &= 34\tan(48.6°) - 6.1 \\ y &= 43.8 \text{ feet}\end{aligned}$$Therefore, the height of the pole is 43.8 feet.

Learn more about Trigonometric here,Trigonometric functions

https://brainly.com/question/25618616

#SPJ11

Given a budget of $1800 for fuel and an assumed cost of 30 cents per mile, an individual would be able to travel a maximum of 6000 miles over the course of an entire year.

To get the maximum number of miles that can be driven with a fuel budget of $1800, we divide the budget by the cost per mile. This gives us the maximum number of miles that can be driven. For the sake of argument, let's say that the hypothetical cost per mile is thirty cents.

The maximum number of miles that can be driven, hence the calculation becomes miles = 1800 / 0.30. We are able to find the solution to the equation by performing the evaluation.

When we divide $1800 by 0.30, we get 6000. Therefore, given a budget of $1800 for fuel and an assumed cost of 30 cents per mile, an individual would be able to travel a maximum of 6000 miles over the course of an entire year.

Learn more about cents here:

https://brainly.com/question/15483313

#SPJ11

The distribution that X follows in this scenario is A. X ~ Expo(1/16), which means that the waiting time until you see Peter the Anteater follows an exponential distribution with a rate parameter of 1/16.

This can be determined by considering the characteristics of an exponential distribution, which models the waiting time for an event to occur given a constant rate. In this case, the event is seeing Peter the Anteater, and the rate is the average time it takes for him to appear, which is given as 16 minutes.

Know more about the exponential distribution

https://brainly.com/question/30481829

#SPJ11

Leila served 30 orders, Keith served 36 orders, and Michael served 21 orders.

Let's assume the number of orders served by Michael is M. According to the given information, Keith served 3 times as many orders as Michael, so Keith served 3M orders. Leila served 7 more orders than Michael, which means Leila served M + 7 orders.

The total number of orders served by all three individuals is 87. We can set up the equation: M + 3M + (M + 7) = 87.

Combining like terms, we simplify the equation to 5M + 7 = 87.

Subtracting 7 from both sides, we get 5M = 80.

Dividing both sides by 5, we find M = 16.

Therefore, Michael served 16 orders. Keith served 3 times as many, which is 3 * 16 = 48 orders. Leila served 16 + 7 = 23 orders.

In conclusion, Michael served 16 orders, Keith served 48 orders, and Leila served 23 orders.

Learn more about  Dividing here :

https://brainly.com/question/15381501

#SPJ11