Answer:
34176.5 torr
Explanation:
It is given that :
Initial pressure, [tex]$P_1 = 830$[/tex] torr
Initial volume, [tex]$V_1 = 650 \ cm^3$[/tex]
Initial temperature, [tex]$T_1 = 85^\circ C$[/tex]
Final volume, [tex]$V_2 = 65 \ cm^3$[/tex]
Final temperature, [tex]$T_2 = 350^\circ C$[/tex]
Therefore, using the combined gas laws, we can write :
[tex]$\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}$[/tex]
Substituting the values, we get
[tex]$\frac{830 \times 650}{85}=\frac{P_2\times 65}{350}$[/tex]
[tex]$P_2 = \frac{830 \times 650 \times 350}{85 \times 65}$[/tex]
= 34176.5 torr
So the new pressure is 34176.5 torr.
how many Valance electrons does Bismuth have?
please help me. i'm doing a test
Answer:
5 valence electrons
Thus, bismuth would have 5 valence electrons
Explanation:
Hope it helps
Please help I’m stuck
Answer:
wouldn't it be the #2 because +∆H um I forgot
what is the uncertian digit in 0.054 g
Answer:
5.4g
Explanation:
Which mutation in a fruit fly could be passed on to its offspring
20. What is the momentum of a 0.15-kilogram baseball moving at 20
m/sec?
1,5 kg*m/sec
3 kg*m/sec
O 15 kg*m/sec
O 30 kg*m/sec
when the other girl thicc
Explanation:
let's make this swamp great again
4) Calculate the net force *
3 N
10-7= 3
the arrows are opposing each other.
Answer:
The net or resultant force depende on the direction we can easily understood the directions are opposite .Force is vector so if vectors are opposite we difference the two vectors.
10N-7N=3N
Please help! It’s due today. I’ll give brainliest
What is the molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution?
Answer:
D
Explanation:
all ya got to do is divide the moles from the solution... so 3.0 divided by 0.25. put it in a calculator
hope this helps
The molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution is 12M.
What is Molarity?Molarity of a given solution is known as the total number of moles of solute per litre of the solution. A solution that is 1.00 molar (written 1.00 M) contains 1.00 mole of solute for every liter of solution.
Molarity = (No. of moles of solute ÷ Volume of solution in liters)
The unit of molarity is mol L⁻¹.
Molarity is temperature dependent because as temperature changes, volume of the solution also changes.
Given,
3.0 moles of Saline (NaCl)
Volume of solution = 0.25L
Molarity = (No. of moles of solute ÷ Volume of solution in liters)
Molarity = 3 ÷ 0.25 = 12 M
Therefore, The molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution is 12M.
Learn more about molarity, here:
brainly.com/question/8732513
#SPJ2
11.
The characteristics of a group of elements are listed in the table.
Characteristics of a group of Elements
• Solid at room temperature
• Good conductor of electricity
• Atoms have one valence electron
Which of these elements is in this group?
A. Sodium
B. Phosphorus
C. Bromine
D. Neon
Answer:
Sodium
Explanation:
I dont know but its a wild guess
Answer:
sodium
Explanation:
its solid at room temp, most metals are good conductor of electricity and also its in group 1A so it has one valence electron
What is correct about solubility of
substances?
how many helium atoms are in a mole of helium?
Answer:1 mole of helium gas contains 6.02 x1023 helium atoms
Explanation:I hope this helps
Which of the following is not a stimulus?
A hearing a loud noise
B. sneezing
C. touching a hot object
D. tasting a lemon
Answer:
B. sneezing
Explanation:
Because every other one is an action resulting in stimulation.
True or False: if chemicals behave in a similar way they are grouped together on the periodic table
Answer:
Explanation: it is true
A bowler lifts her bowling ball a distance of 0.5 meters using 35 joules of energy. If, on Earth, a 1.0 kilogram mass weighs 9.8 newtons, the mass of the bowling ball used by this bowler is about;
Answer:17.5
Explanation: (0.5 meters)(35 Joules) =
When the bowler lifts the bowling ball for a distance of 0.5 m, the mass of the bowling ball used by the bowler is 17.3 kg.
What is Energy?The ability to do work is called Energy.
As work done and energy has the same units. The energy required is equal to the work done.
E = W = 35 J
Force acting on the ball is equal to the weight of the ball.
F = Weight =mg
where m = mass of the bowling ball and g = acceleration due to gravity
Substituting the given energy and distance moved, we have
[tex]35 = m\times9.81\times0.5\\ m=17.3 \:\rm kg[/tex]
Therefore, the mass of the bowling ball is 17.3 kg.
Learn more about energy
https://brainly.com/question/1932868
#SPJ2
Due tonight! Please help!
Please show your work and don’t spam or delete answers
I will mark Brainliest!
Calculate the concentration in grams per liter of a 450.0 mL solution containing
0.0762 moles of iodine gas (I2)
Answer:
42.98 g/L
Explanation:
6. An acidic solution of potassium dichromate is mixed with an aqueous solution of
hydrogen peroxide.
Is a blender (at home) an example of electrical to mechanical energy? If so, why? Please explain thoroughly
Answer:
Yes it is
Explanation:
You use electricity to power the blender itself, then after you power it the potential energy becomes kinetic energy which equals mechanical energy in the blender. So yes, a blender is an example of electrical to mechanical energy.
A teacher performed a demonstration of a chemical reaction by stretching a ballon containing Sodium bicarbonate (baking soda) over the top of a flask containing acetic acid (vinegar). When the sodium bicarbonate was added to the acetic acids the ballon began to inflate shown I'm the figure.
What will the total mass of the flask, the ballon, and products be after the reaction?
A. Less than 100g, because some of the solid baking soda disappears
B. 100g, because all of the atoms of the reactants remain in the flask
C. Less than 100g, because the gas has less mass than the solids and liquids
D. 100g, because the volume of gas inside the balloon has increased
Explanation:
D. 100g, because the volume of gas inside the balloon has increased
In chemical reactions that occurs in closed systems, the amount of matter is conserved. The total mass of the system is conserved because the gas did not escape and the volume has increased,
Answer:
d
Explanation:
Will mark branliest!! and 50 points for right answer!
1. which solvent resulted in the best separation of ink? oil or alcohol
2. which marker had a red spot or streak with an Rf value of approximately 0.82? Maker 1, 2, 3, or none?
3. which spot has the lowest rf value in the marker 3s chromatogram? yellow or purple?
4. which marker had a yellow spot with an rf value of approximately 0.60? Marker 1,2,3 or none?
Answer:
Alcohol, 0.63 I don't know the rest the rest
Explanation:
Answer:
Explanation:
1. Alcohol
2. Marker 1
3. Purple
4. Marker 2
Filling out the lab paper gives you the answers. These were all correct.
Really need help!! Don’t understand:( 40 points
If 100.0g of nitrogen gas (N2) is reacted with 100.0g of hydrogen gas (H2) what is the limiting and excess reactants?
Hint: convert grams to moles for each reactant and then convert to moles of NH3. You need your balanced equation from answer 1 to determine the mole relationship between each reactant and the product NH3. Use the periodic table to determine the molar mass of all chemical formulas. Fill in the “?” Blanks below to show your work.
Please please please fill in the blanks...
Molar mass of H2= ____ g/mol
100.0g H2 • 1 mol H2/? g H2 • ? Mol NH3/ ? Mol H2 = ? Mol NH3
Molar mass of N2= ? g/mol
100.0g N2 • 1 mol N2/ ? g N2 • ? Mol NH3/ ? Mole N2 = ? Mol NH3
Molar mass of NH3 = ? g/mol
100.0g N2 • 1 mol N2/ ? g N2 • ? Mol NH3/ ? Mol N2 • ? g NH3/ 1 mole NH3 = g NH3
Pretty please help me :( PWEAASEEEEEEE
I need help, please answer
Answer:
it explodes
Explanation:
Answer:
Mrs girl I'm sorry I don't know
I just need the points
I'll give brianliest if correct .
Answer:
the answer is decaying wood
1. What was the mass of a sample of water if the addition of 4280 joules raised the temperature of the sample from 22.00C to 34.50C?
2. What is the specific heat of a sample of an alloy if 3750 joules of heat are released when a 315 gram sample of alloy cools from 78.00C to 28.40C?
3. The specific heat of iron is 0.448 J/g0C. What will be the final temperature if 35000 joules of heat are added to a 454 gram sample of iron at 24.00C?
4. What will be the final temperature when 8750 joules are added to 75.0 grams of water at 23.00C?
5. When 38800 joules were added to a sample of iron, specific heat 0.448 J/g0C, the temperature rose from 24.5 deg C to 178 deg C. What was the mass of the iron sample?
Explanation:
Number 1
Q = 4280J
mass = x
∆∅ = 34.5 - 22
∆∅ = 12.5°C
Specific heat capacity of water = 4200J
Q = mc∆∅
4280 = x(4200)(12.5)
4280 = 52500x
x = 4280/52500
x = 0.0815kg
Number 2
c = x
Q = 3750
m = 315g
∆∅ = 78 - 28.4
∆∅ = 49.6°C
Q = mc∆∅
3750 = 315×x×49.6
3750 = 15624x
x = 3750/15624
x = 0.2400J(g°C)-¹
Number 3
c = 0.448
Q = 35000
m = 454g
∆∅ = x
Q = mc∆∅
35000 = 454(0.448)(x)
35000 = 203.392x
x = 35000/203.392
x = 172.0815
∅2 - ∅1 = ∆∅
∅2 = ∆∅ + ∅1
∅2 = 172.0815 + 24
∅2 = 196.0815
∅2 = 196°C
Number 4
Q = 8750J
m = 75g = 0.075
c = 4200J/kg/°C
∆∅ = x
Q = mc∆∅
8750 = 0.075(4200)∆∅
8750 = 315×x
x = 8750/315
x = 27.7778
∅2 - ∅1 = 27.7778
∅2 = 27.7778 + ∅1
∅2 = 27.7778 + 23
∅2 = 50.7778
∅2 = 50.8°C
Number 5
Q = 38800J
c = 0.448J/(g°C)
∆∅ = 178 - 24.5
∆∅ = 153.5°C
m = x
Q = mc∆∅
38800 = x × 0.448 × 153.5
38800 = 68.768x
x = 38800/68.768
x = 564.2159
x = 564g
Are humans more similar to trees or bacteria? How do you know?(1 point)
A
Humans are more similar to bacteria because trees cannot move around their environment.
B
Humans are more similar to trees because bacteria are too small to see.
C
Humans are not similar to trees or bacteria. Humans are a special species that is not related to any other species on Earth.
D
Humans are more similar to trees because all plants and animals are part of the same domain.
Answer:
a
Explanation:
Answer:
Option D
Explanation:
A and B both make sense to some level.
For option A,trees can only move while bacteria and humans can both move and locomote so there's that similarity
For option B,humans and plants are not micro organisms but bacteria are so there's that similarity
Option C is just not true
Option D is the right answer thus both humans and animals are eukaryotes
True or False
All cells are the same on the inside
HELP ME!
A magnet can pull the iron filings out of a mixture of sand and iron
filings.
TRUE
FALSE
Answer:
this is true
Explanation:
because the sand is left behind for it isn't magnetic
Algae and other phytoplankton are the major producers of the earth's:
oxygen
carbon dioxide
hydrogen
nitrogen
Answer:
oxygen
Explanation:
pls mark me brainliest right
Cyclopropene decomposes to propene when heated to 500 C, calculate rate constant for the first order reaction 0 min 1.48 mmol/L
Answer:
k = 0.0306 min-1
Explanation:
The table is given as;
Time, Concentration
0 1.48
5 1.27
10 0.98
15 0.84
The integrated rate law for a first order reaction is given as;
ln [A] = -kt + ln [Ao]
where;
[A] = Final Concentration
[Ao] = Initial Concentration
k = rate constant
t = time
In the table, taking the first two sets of values;
t = 5
k = ?
[Ao] = 1.48
[A] = 1.27
Inserting into the equation;
ln(1.27) = - k (5) + ln(1.48)
ln(1.27) - ln(1.48) = -5k
-0.1530 = -5k
k = -0.1530 / -5
k = 0.0306 min-1
Did the argon change state as you heated the atoms?
When heat is added to a substance, the molecules and atoms vibrate faster. As atoms vibrate faster, the space between atoms increases. Solids, liquids and gases all expand when heat is added. When heat leaves all substances, the molecules vibrate slower. So yes, it can if the heat is strong enough to change the objects compesistion! :)
Argon is a noble gas. It always exists in the form of gas. The boiling point of argon is very higher and thus we cant change its state, by simply heating.
What is argon ?Argon is 18th element in periodic table. It has 18 electrons and 18 protons. The mass number of argon is around 36 g/mol. Argon is included in the group 18 called the noble gases.
All the noble gases are highly stable and they are not reactive at normal conditions. They cant be easily form compounds or change their state by excitation or photochemical reaction.
Argon has higher melting point and boiling point. It cannot be easily transformed to another state by simply heating. But there occurs electron excitation, where the phase change cannot occurs.
Find more on argon:
https://brainly.com/question/133359
#SPJ3