the number 81 has how many fourth roots?

Based on the information provided, we have a set of values for x and the corresponding probability density function p(x). We are looking for the value of x that corresponds to p(x) = 6553.6.

One way to approach this problem is to use interpolation. We can see that the values of p(x) are increasing rapidly as x increases, which suggests that the function is likely to be smooth and continuous. Therefore, we can use a method such as linear interpolation to estimate the value of x that corresponds to p(x) = 6553.6.To do this, we need to find two adjacent values of x that bracket the target value of p(x). Looking at the table, we can see that the values of p(x) increase by a factor of 4 each time x increases by 1. Therefore, we can estimate that p(13) < 6553.6 < p(51.2).We can now use linear interpolation to estimate the value of x that corresponds to p(x) = 6553.6. The formula for linear interpolation is:
x = x1 + (x2 - x1) * (y - y1) / (y2 - y1)
where x1 and x2 are the two adjacent values of x, y1 and y2 are the corresponding values of p(x), and y is the target value of p(x). Plugging in the values we have:
x = 13 + (51.2 - 13) * (6553.6 - 1638.4) / (51.2 - 1638.4)
x ≈ 20.865
Therefore, the value of x that corresponds to p(x) = 6553.6 is approximately 20.865.

Learn more about density here

https://brainly.com/question/1354972

#SPJ11

The requried expression for the area in the factored form of the countertop that is left after the hole is drilled is 2(2x + 3)(x + 1).

To find the area of the countertop left after the hole is drilled, we need to subtract the area of the hole from the area of the entire countertop. So, we have:

Area of countertop left = (5x² + 12x + 7) - (x² + 2x + 1)

Area of countertop left = 4x² + 10x + 6

Area of countertop left = 2(2x² + 5x + 3)

Area of countertop left = 2(2x + 3)(x + 1)

Therefore, the expression for the area in the factored form of the countertop that is left after the hole is drilled is 2(2x + 3)(x + 1).

Learn more about fractions here:

https://brainly.com/question/10708469

#SPJ1

There are no 5-digit numbers in which every two neighboring digits differ by 2.

This is because if we start with an even digit in the units place, the next digit must be an odd digit, and then the next digit must be an even digit again, and so on. However, there are no pairs of adjacent odd digits that differ by 2.

Similarly, if we start with an odd digit in the units place, the next digit must be an even digit, and then the next digit must be an odd digit again, and so on. But again, there are no pairs of adjacent even digits that differ by 2.

Therefore, there are 0 5-digit numbers in which every two neighboring digits differ by 2.

Learn more about neighboring here

https://brainly.com/question/23792839

#SPJ11

Based on the proof, the set {c1v1, c2v2} is also an orthogonal set.

It should be noted that to show that {c1v1, c2v2} is an orthogonal set, we need to show that their dot product is zero, i.e.,

(c1v1)⋅(c2v2) = 0

Expanding the dot product using the distributive property, we get:

(c1v1)⋅(c2v2) = c1c2(v1⋅v2)

Since {v1, v2} is an orthogonal set, their dot product is zero, i.e.,

v1⋅v2 = 0

Substituting this in the above equation, we get:

(c1v1)⋅(c2v2) = c1c2(v1⋅v2) = c1c2(0) = 0

Therefore, the set {c1v1, c2v2} is also an orthogonal set.

Leaen more about orthogonal on

https://brainly.com/question/30772550

#SPJ1

To find the Maclaurin series for f(x) = xe3x, we can start by taking the derivative of the function:

f'(x) = (3x + 1)e3x

Taking the derivative again, we get:

f''(x) = (9x + 6)e3x

And one more time:

f'''(x) = (27x + 18)e3x

We can see a pattern emerging here, where the nth derivative of f(x) is of the form:

f^(n)(x) = (3^n x + p_n)e3x

where p_n is a constant that depends on n. Using this pattern, we can write out the Maclaurin series for f(x):

f(x) = f(0) + f'(0)x + f''(0)x^2/2! + f'''(0)x^3/3! + ... + f^(n)(0)x^n/n! + ...

Plugging in the values we found for the derivatives at x=0, we get:

f(x) = 0 + (3x + 1)x + (9x + 6)x^2/2! + (27x + 18)x^3/3! + ... + (3^n x + p_n)x^n/n! + ...

Simplifying this expression, we get:

f(x) = x(1 + 3x + 9x^2/2! + 27x^3/3! + ... + 3^n x^n/n! + ...)

This is the Maclaurin series for f(x) = xe3x. To find the radius of convergence, we can use the ratio test:

lim |a_n+1/a_n| = lim |3x(n+1)/(n+1)! / 3x/n!|
= lim |3/(n+1)| |x| -> 0 as n -> infinity

So the radius of convergence is infinity, which means that the series converges for all values of x.

Learn more about Maclaurin series here:

https://brainly.com/question/31745715

#SPJ11

Answer:

a and -b

Third answer choice

Step-by-step explanation:

If (x - a)(x - b) = 0

then one or both of the terms must be zero

Therefore one solution can be found when (x- a) = 0
x - a = 0 ==> x = a

The other solution is when (x+ b) = 0
x + b = 0 ==> x = - b

So the solution set is
x = a and x = -b

Third answer choice

The equivalent expression of 0.40a is 0.40(a - 1)

Stella uses the expression 0.40a, where a is the original attendance at a play, to find the reduced attendance at the next performance. A formula for calculating the reduced attendance at the next performance can be represented by this expression 0.40a.
To find the equivalent expression to 0.40a, we have to distribute 0.40 and simplify as shown below:0.40a= (0.40 * a) = 0.40a
Also, 0.40(a - 1) can also be used to calculate the reduced attendance at the next performance.

The equivalent expression to 0.40a is 0.40(a - 1).

To know more about expression, click here

https://brainly.com/question/28170201

#SPJ11

Answer: To find the first five terms of the sequence, we substitute n = 1, 2, 3, 4, and 5 into the expression:

a1 = ln(1)/(1+1) = 0/2 = 0

a2 = ln(2)/(2+1) = 0.231

a3 = ln(3)/(3+1) = 0.109

a4 = ln(4)/(4+1) = 0.079

a5 = ln(5)/(5+1) = 0.064

So the first five terms of the sequence are 0, 0.231, 0.109, 0.079, and 0.064.

To determine whether the sequence converges, we can use the limit comparison test with the harmonic series, which we know diverges:

lim(n->∞) (ln(n)/(n+1)) / (1/(n+1)) = lim(n->∞) ln(n) = ∞

Since the limit of the ratio is infinity, and the harmonic series diverges, the given sequence also diverges.

Therefore, the sequence does not converge, and it does not have a limit.

The limit of the sequence as n approaches infinity is infinity.

To find the first five terms of the sequence, simply plug in the values of n from 1 to 5 into the expression ln(n)n:

1. ln(1) * 1 = 0 (since ln(1) = 0)
2. ln(2) * 2 ≈ 1.386
3. ln(3) * 3 ≈ 3.296
4. ln(4) * 4 ≈ 5.545
5. ln(5) * 5 ≈ 8.047

Now, let's determine if the sequence converges. To do this, we'll look at the limit of the sequence as n approaches infinity:

lim (n → ∞) ln(n) * n

As n grows larger, both ln(n) and n increase without bound. Therefore, their product will also increase without bound:

lim (n → ∞) ln(n) * n = ∞

Since the limit of the sequence as n approaches infinity is infinity, the sequence does not converge.

In conclusion, the first five terms of the sequence are approximately 0, 1.386, 3.296, 5.545, and 8.047.

The sequence does not converge, as its limit as n approaches infinity is infinity.

To know more about sequence refer here:

https://brainly.com/question/21961097?#

#SPJ11

The line integral of f(x,y,z) = xyz² over the curve c is approximately equal to 91.058.

The line integral of the given function f(x,y,z) = xyz² over the curve c can be expressed as:

∫c f(x,y,z) ds = ∫[a,b] f(r(t)) ||r'(t)|| dt

Now we can calculate r'(t):

r'(t) = (2, 1, 3)

||r'(t)|| = ✓(2² + 1² + 3²) = sqrt(14)

∫c f(x,y,z) ds = ∫[0,1] (x(t) * y(t) * z(t)²) * ✓(14) dt

∫c f(x,y,z) ds = ∫[0,1] (-3 + 2t) * (6 + t) * (3t)² * ✓(14) dt

Simplifying and integrating, we get:

∫c f(x,y,z) ds = 9✓(14) ∫[0,1] (216t × 216t⁴ - 81t⁴ - 12t³) dt

∫c f(x,y,z) ds = 9✓(14) * (43/20) = 91.058

Learn more about integral on

https://brainly.com/question/27419605

#SPJ1

The gas gauge will show a lower reading if the gas tank is less than full when you return home after your trip to the mountains.

The gas gauge will show a lower reading if the gas tank is less than full when you return home after your trip to the mountains. This is due to the increased effort required to drive in mountainous terrain, which necessitates more fuel consumption.The amount of fuel used by the car will be determined by a variety of factors, including the engine, the type of vehicle, and the driving conditions. Since the car was driven in the mountains, it is likely that more fuel was used than usual, causing the gauge to show a lower reading.

Know more about  gas gauge here:

https://brainly.com/question/19298882

#SPJ11

To find a function g(x) that results in a uniformly distributed y = g(x) on the interval [0,1], we can use the inverse transformation method. This involves using the inverse of the cumulative distribution function (CDF) of the uniform distribution.

The CDF of the uniform distribution on [0,1] is simply F(y) = y for 0 ≤ y ≤ 1. Therefore, the inverse CDF is F^(-1)(u) = u for 0 ≤ u ≤ 1.

Now, let's define our function g(x) as g(x) = F^(-1)(x) = x. This means that y = g(x) = x, and since x is uniformly distributed on [0,1], then y is also uniformly distributed on [0,1].

In summary, the function g(x) = x results in a uniformly distributed y = g(x) on the interval [0,1].
Hello! I understand that you want a function g(x) that results in a uniformly distributed variable y between 0 and 1. A simple function that satisfies this condition is g(x) = x, where x is a uniformly distributed variable on the interval [0, 1]. When g(x) = x, the variable y also becomes uniformly distributed over the same interval [0, 1].

To clarify, a uniformly distributed variable means that the probability of any value within the specified interval is equal. In this case, for the interval [0, 1], any value of y will have the same likelihood of occurring. By using the function g(x) = x,

To know more about Functions visit :

https://brainly.com/question/12431044

#SPJ11

The time interval at which instantaneous velocity of the particle equal to the average velocity of the particle is t = 225

Given data ,

To find the instantaneous velocity of the particle, we need to take the derivative of the position function:

p'(t) = 1/(2√t)

To find the average velocity over the interval [1, 16], we need to find the displacement and divide by the time:

average velocity = [p(16) - p(1)] / (16 - 1)

= [√16 - 2 - (√1 - 2)] / 15

= (2 - 1) / 15

= 1/15

Now we need to find a time t in the interval [1, 16] such that p'(t) = 1/15

On simplifying the equation , we get

1/(2√t) = 1/15

Solving for t, we get:

t = 225

Hence , at time t = 225, the instantaneous velocity of the particle is equal to the average velocity over the interval [1, 16]

To learn more about velocity click :

https://brainly.com/question/19979064

#SPJ1

The number of equilibrium points for the given nonlinear system is 3.

To find the equilibrium points, we need to set both equations to zero and solve for x and y:

1. x′ = y² − xy = 0
2. y′ = x³y² − x = 0

First, let's look at equation 2. We can factor x out:

x(y²x² - 1) = 0

There are two possibilities:

a. x = 0: Substitute x = 0 in equation 1:

y² - 0 = y² = 0 => y = 0

So, we have one equilibrium point (0, 0).

b. y²x² - 1 = 0: Replacing this in equation 1:

y² - (y²x² - 1)y = 0

Factor out y:

y(y²(1 - x²) - 1) = 0

There are two more possibilities:

i. y = 0: We already considered this case (0, 0).

ii. y²(1 - x²) - 1 = 0: This equation gives us two equilibrium points: (-1, 1) and (1, 1).

Thus, the system has a total of 3 equilibrium points: (0, 0), (-1, 1), and (1, 1).

To know more about equilibrium points click on below link:

https://brainly.com/question/1527528#

#SPJ11

The y-intercept represents the area of the bed and room together when the length and width of the bed are both zero and the function is given by the relation A(x) = x² + 12x + 35

Given data ,

To find the standard form of the function A(x), we first expand the expression:

A(x) = (x + 5) (x + 7)

A(x) = x² + 7x + 5x + 35

A(x) = x² + 12x + 35

So the standard form of the function A(x) is:

A(x) = x² + 12x + 35

To find the y-intercept, we set x = 0 in the function:

A(0) = 0² + 12(0) + 35

A(0) = 35

So the y-intercept is 35. In the context of the problem, the y-intercept represents the area of the bed and room together when the length and width of the bed are both zero.

Hence , the function is solved

To learn more about function rule click :

https://brainly.com/question/3760195

#SPJ1

If Evie takes out a loan of 600 and this debt increases by 24% every year then  Evie will owe about £3,275.1

After 1 year, Evie's debt will increase by 24%, which means she will owe:

600 + 0.24(600) = 744

After 2 years, her debt will increase by another 24%, making it:

744 + 0.24(744) = 922.56

We can see that after each year, her debt will increase by 24% of the previous year's balance.

Therefore, after 12 years, her debt will be:

600(1 + 0.24)¹² = 600(5.4585)

= 3275.10

Hence, Evie will owe about £3,275.10

To learn more on Percentage click:

https://brainly.com/question/24159063

#SPJ1

Assuming that "a" refers to a matrix with dimensions of 100x10^6, it is highly unlikely that either the primal or dual problem would be solvable using traditional methods.

if "a" is assumed a much smaller matrix with dimensions that were suitable for traditional methods, then the answer would depend on the specific problem being solved and the preference of the solver.

In general, the primal problem is used to maximize a linear objective function subject to linear constraints, while the dual problem is used to minimize a linear objective function subject to linear constraints.

So, if the problem involves maximizing a linear objective function, then the primal problem would likely be solved.

If the problem involves minimizing a linear objective function, then the dual problem would likely be solved.

Read more about the Matrix.

https://brainly.com/question/31017647

#SPJ11

The expression that shows the total height of this toy tower is

[tex]3x^4 + 13x^2 - 10.[/tex]

What is the total height of the toy tower?

Saskia constructed a tower made of interlocking brick toys.

There are

[tex]x^2 +5[/tex]

levels in this model.

Each brick is

[tex]3x^2 – 2[/tex]

inches high. To find the total height of the toy tower, we multiply the number of levels by the height of each brick. The height of each brick is given as

[tex]3x^2 – 2 inches.[/tex]

So, total height of the toy tower is

[tex](x² + 5) × (3x² – 2) inches= 3x^4 + 13x^2 - 10[/tex]

Therefore, the expression that shows the total height of this toy tower is

[tex]3x^4 + 13x^2 - 10.[/tex]

To know more about expression, visit:

https://brainly.com/question/28170201

#SPJ11

We would need a sample size of approximately 167 grade point averages to ensure that the sample mean is within 0.01 of the population mean with a 99% confidence level using the range rule of thumb.

To ensure that the sample mean is within 0.01 of the population mean with a 99% confidence level, the number of grade point averages needed depends on the standard deviation of the population. The answer can be obtained using the range rule of thumb.

The range rule of thumb states that for a normal distribution, the range is typically about four times the standard deviation. Since we want the sample mean to be within 0.01 of the population mean, we can consider this as the range.

A 99% confidence level corresponds to a z-score of approximately 2.58. To estimate the standard deviation of the population, we need to assume a sample size. Let's assume a conservative estimate of 30, which is generally considered sufficient for the Central Limit Theorem to apply.

Using the range rule of thumb, the range would be approximately 4 times the standard deviation. So, 0.01 is equivalent to 4 times the standard deviation.

To find the standard deviation, we divide 0.01 by 4. So, the estimated standard deviation is 0.0025.

To determine the number of grade point averages needed, we can use the formula for the margin of error in a confidence interval: Margin of Error = (z-score) * (standard deviation / √n).

Rearranging the formula to solve for n, we have n = ((z-score) * standard deviation / Margin of Error)².

Plugging in the values, n = ((2.58) * (0.0025) / 0.01)² = 166.41.

Learn more about sample mean:

https://brainly.com/question/31101410

#SPJ11

The answer of the given question based on the degrees is , Philip covered 270 degrees in 45 minutes and 0.75 turn in the game.

To answer this question, we must know that a full circle contains 360 degrees.

Therefore, we can use the proportion as follows:

60 minutes = 360 degrees

1 minute = 6 degrees

1 turn = 360 degrees

Here, Philip watched the volleyball game for 45 minutes.

Thus, the total degrees covered in 45 minutes are:

6 degrees/minute × 45 minutes = 270 degrees

And the number of turns covered in 45 minutes is:

360 degrees/turn × 45 minutes / 60 minutes/turn = 0.75 turn

Therefore, Philip covered 270 degrees in 45 minutes and 0.75 turn in the game.

To know more about Proportion visit:

https://brainly.com/question/30241688

#SPJ11

We are given i.i.d. Bernoulli trials with success probability p, and we need to find the conditional probability mass function of Sm, given Sn-k. The distribution that arises in this problem is the binomial distribution.

The binomial distribution is the probability distribution of the number of successes in a sequence of n independent Bernoulli trials, with a constant success probability p. In this problem, we are considering a subsequence of n-k trials, and we need to find the conditional probability mass function of the number of successes in a subsequence of m trials, given the number of successes in the remaining n-k trials. Since the Bernoulli trials are independent and identically distributed, the probability of having k successes in the remaining n-k trials is given by the binomial distribution with parameters n-k and p.

Using the definition of conditional probability, we can write:

P(Sm = s | Sn-k = k) = P(Sm = s and Sn-k = k) / P(Sn-k = k)

=[tex]P(Sm = s)P(Sn-k = k-s) / P(Sn-k = k)[/tex]

=[tex](n-k choose s)(p^s)(1-p)^(m-s) / (n choose k)(p^k)(1-p)^(n-k)[/tex]

where (n choose k) =n! / (k!(n-k)!)  is the binomial coefficient.

We can use this conditional probability mass function to find E[Sm | Sn-k]. By the law of total expectation, we have:

[tex]E[Sm] = E[E[Sm | Sn-k]][/tex]

=c[tex]sum{k=0 to n} E[Sm | Sn-k] P(Sn-k = k)\\= sum{k=0 to n} (m(k/n)) P(Sn-k = k)[/tex]

where we have used the fact that E[Sm | Sn-k] = mp in the binomial distribution.

Thus, the conditional probability mass function of Sm, given Sn-k, leads to an expression for the expected value of Sm in terms of the probabilities of Sn-k.

Learn more about bernoulli here:

https://brainly.com/question/30509621

#SPJ11

if f(x) ε F[x] is not irreducible, then F[x]/ contains zero-divisors.

Suppose that f(x) is not irreducible in F[x]. Then we can write f(x) as the product of two non-constant polynomials g(x) and h(x), where the degree of g(x) is less than the degree of f(x) and the degree of h(x) is less than the degree of f(x).

Therefore, in F[x]/(f(x)), we have:

g(x)h(x) ≡ 0 (mod f(x))

This means that g(x)h(x) is a multiple of f(x) in F[x]. In other words, there exists a polynomial q(x) in F[x] such that:

g(x)h(x) = q(x)f(x)

Now, let us consider the images of g(x) and h(x) in F[x]/(f(x)). Let [g(x)] and [h(x)] be the respective images of g(x) and h(x) in F[x]/(f(x)). Then we have:

[g(x)][h(x)] = [g(x)h(x)] = [q(x)f(x)] = [0]

Since [g(x)] and [h(x)] are non-zero elements of F[x]/(f(x)) (since g(x) and h(x) are non-constant polynomials and hence non-zero in F[x]/(f(x))), we have found two non-zero elements ([g(x)] and [h(x)]) in F[x]/(f(x)) whose product is zero. This means that F[x]/(f(x)) contains zero-divisors.

To learn more about polynomials visit:

brainly.com/question/11536910

#SPJ11

F(x,y) = y[tex]e^{xsiny + xy - sinx}[/tex] + ∫sin y[tex]e^{xsiny + xy - sinx}[/tex]dx is a solution to the original differential equation.

Here, we have,

This is a first-order nonlinear differential equation, which is not separable or linear. However, it is possible to use an integrating factor to solve it.

The first step is to rearrange the equation into the standard form:

(y cos x + sin y + y)dx + (sin x + x cos y + x)dy = 0

Next, we need to identify the coefficient functions of dx and dy, which are:

M(x,y) = y cos x + sin y + y

N(x,y) = sin x + x cos y + x

Now we can find the integrating factor, which is defined as a function u(x,y) that makes the equation exact. The integrating factor is given by:

u(x,y) = [tex]e^{(\int\,(N(x,y) - dM/dy) dy) }[/tex]

where ∂M/∂y is the partial derivative of M with respect to y.

Evaluating this integral, we get:

u(x,y) =  [tex]e^{xsiny + xy - sinx}[/tex]

Multiplying both sides of the original equation by the integrating factor, we get:

([tex]e^{xsiny + xy - sinx}[/tex]) [y cos x + sin y + y])dx + ([tex]e^{xsiny + xy - sinx}[/tex] [sin x + x cos y + x])dy = 0

This equation is exact, which means that there exists a function F(x,y) such that ∂F/∂x = M(x,y) and ∂F/∂y = N(x,y). We can find this function by integrating M with respect to x, while treating y as a constant, and then differentiating the result with respect to y:

F(x,y) = ∫(y cos x + sin y + y)[tex]e^{xsiny + xy - sinx}[/tex]dx = y[tex]e^{xsiny + xy - sinx}[/tex] + ∫sin y[tex]e^{xsiny + xy - sinx}[/tex]dx

Now we can differentiate F with respect to y, while treating x as a constant, and compare the result with N:

∂F/∂y = x[tex]e^{xsiny + xy - sinx}[/tex] + cos y[tex]e^{xsiny + xy - sinx}[/tex] + [tex]e^{xsiny + xy - sinx}[/tex]

= sin x + x cos y + x

Therefore, F(x,y) = y[tex]e^{xsiny + xy - sinx}[/tex] + ∫sin y[tex]e^{xsiny + xy - sinx}[/tex]dx is a solution to the original differential equation.

learn more about differential equation:

brainly.com/question/2030026

#SPJ1

complete question:

Solve (y cos x + sin y + y)dx + (sin x + x cos y + x)dy = .0

The expected value of the game is $1.50.

To calculate the expected value of the game, we need to find the probability of each outcome and multiply it by its respective payout or loss.

There are four possible outcomes when flipping two coins: HH, HT, TH, and TT. Since the coins are fair, each outcome has a probability of 1/4 or 0.25.

If we get HH or TT, we win $5. So the total payout for those two outcomes is $10.

If we get HT or TH, we lose $2. So the total loss for those two outcomes is $4.

To find the expected value of the game, we subtract the total loss from the total payout and multiply by the probability of each outcome:
(10 - 4) * 0.25 = 1.5

So the expected value of the game is $1.50.

Know more about the expected value here:

https://brainly.com/question/24305645

#SPJ11

Answer:

8.5% tax rate

Step-by-step explanation:

17/200= 0.085 = 8.5%

S satisfies all the conditions of being a subring of R, and we can conclude that S is indeed a subring of R.

To show that S is a subring of R, we need to verify the following three conditions:

1. S is closed under addition: Let x, y belong to S. Then, we have ax = 0 and ay = 0. Adding these equations, we get a(x + y) = ax + ay = 0 + 0 = 0. Thus, x + y belongs to S.

2. S is closed under multiplication: Let x, y belong to S. Then, we have ax = 0 and ay = 0. Multiplying these equations, we get a(xy) = (ax)(ay) = 0. Thus, xy belongs to S.

3. S contains the additive identity and additive inverses: Since R is a ring, it has an additive identity element 0. Since a0 = 0, we have 0 belongs to S. Also, if x belongs to S, then ax = 0, so -ax = 0, and (-1)x = -(ax) = 0. Thus, -x belongs to S.

Therefore, S satisfies all the conditions of being a subring of R, and we can conclude that S is indeed a subring of R.

To know more about subrings refer here :

https://brainly.com/question/14099149#

#SPJ11

The instantaneous velocity of the stone at t = 1 is 29.2 m/s.

Given data:

A stone is tossed into the air from ground level with an initial velocity of 39 m/s. Its height at time t is h(t) = 39t − 4.9t² m/s. The required parameters are as follows:

Compute the stone's average velocity over the time intervals [1, 1.01], [1, 1.001], [1, 1.0001],

and [0.99, 1], [0.999, 1], [0.9999, 1].

Estimate the instantaneous velocity v at t = 1.

Solution:

Average velocity = (total distance) / (total time)

In general, distance is the change in the position of an object; as a result, total distance = [h(t2) − h(t1)],

and total time = [t2 − t1].

Using the formula of h(t),

h(t2) = 39t2 − 4.9t²

h(t1) = 39t1 − 4.9t²

Let's evaluate the average velocity over the time intervals using this formula:

[1, 1.01][h(1.01) - h(1)] / [1.01 - 1] = [39(1.01) - 4.9(1.01)² - 39(1) + 4.9(1)²] / [0.01][1, 1.001][h(1.001) - h(1)] / [1.001 - 1]

= [39(1.001) - 4.9(1.001)² - 39(1) + 4.9(1)²] / [0.001][1, 1.0001][h(1.0001) - h(1)] / [1.0001 - 1]

= [39(1.0001) - 4.9(1.0001)² - 39(1) + 4.9(1)²] / [0.0001][0.99, 1][h(1) - h(0.99)] / [1 - 0.99]

= [39(1) - 4.9(1)² - 39(0.99) + 4.9(0.99)²] / [0.01][0.999, 1][h(1) - h(0.999)] / [1 - 0.999]

= [39(1) - 4.9(1)² - 39(0.999) + 4.9(0.999)²] / [0.001][0.9999, 1][h(1) - h(0.9999)] / [1 - 0.9999]

= [39(1) - 4.9(1)² - 39(0.9999) + 4.9(0.9999)²] / [0.0001]

Evaluate the above fractions and obtain the values of average velocity over the given time intervals.

Using the derivative of h(t), we can estimate the instantaneous velocity at t = 1.

Using the formula of v(t), v(t) = h'(t)At t = 1, h'(t) = 39 - 9.8(1) = 29.2 m/s

Thus, the instantaneous velocity of the stone at t = 1 is 29.2 m/s.

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ11

To find a power series solution to the differential equation (x² - 1)y'' + xy' - y = 0, we will assume a power series solution in the form y(x) = Σ(a_n * xⁿ), where a_n are coefficients.


1. Calculate the first derivative y'(x) = Σ(n * a_n * xⁿ⁻¹) and the second derivative y''(x) = Σ((n * (n-1)) * a_n * xⁿ⁻²).
2. Substitute y(x), y'(x), and y''(x) into the given differential equation.
3. Rearrange the equation and group the terms by the powers of x.
4. Set the coefficients of each power of x to zero, forming a recurrence relation for a_n.
5. Solve the recurrence relation to determine the coefficients a_n.
6. Substitute a_n back into the power series to obtain the solution y(x) = Σ(a_n * xⁿ).

By following these steps, we can find a power series solution to the given differential equation.

To know more about power series click on below link:

https://brainly.com/question/29896893#

#SPJ11

The slope of the tangent line to the curve of intersection at P is 9.

To find the curve of intersection between the plane y=1 and the surface z = x^4 + 5xy - y^4, we can substitute y=1 into the equation for the surface:

z = x^4 + 5x - 1

So, the curve of intersection is given by the function:

f(x) = x^4 + 5x - 1

To find the slope of the tangent line to this curve at the point P = (1, 1, 5), we need to take the derivative of the function f(x) and evaluate it at x=1:

f'(x) = 4x^3 + 5

f'(1) = 4(1)^3 + 5 = 9

So, the slope of the tangent line to the curve of intersection at P is 9.

Learn more about slope here:

https://brainly.com/question/3605446

#SPJ11

(a) If [tex]$A$[/tex] is a subset of B and B is a subset of C, then A is a subset of C.

(b) [tex]A\cup B\setminus A = B\setminus A$.[/tex]

(c) [tex]A\cup\bigcup_{i=1}^n a_i = \bigcup_{i=1}^n a_i$, but equality may fail for $n=\infty$.[/tex]

(a) If [tex]A\subseteq B$, then $C\cap A\subseteq C\cap B$.[/tex]

Therefore, if [tex]A\subseteq B$, then $C\cap B\subseteq C\cap A$[/tex] implies that[tex]$C\cap A=C\cap B$.[/tex]

Hence, if [tex]A\subseteq B$, then $C\cap A\subseteq C\cap B$[/tex] and [tex]C\cap B\subseteq C\cap A$,[/tex] which together imply that[tex]$C\cap A=C\cap B$. So if $A\subseteq B$,[/tex] then[tex]$C\cap A=C\cap B$[/tex]  implies that [tex]C\subseteq B$.[/tex]

(b) We have [tex]A\cup B=A\cup (B\setminus A)$,[/tex] so [tex]$A\cup B\setminus A=(A\cup B)\setminus A=B$[/tex] by the set-theoretic identity [tex]A\cup (B\setminus A)=(A\cup B)\setminus A$.[/tex]

Therefore, [tex]A\cup B\setminus A=B$.[/tex]

(c) Let [tex]X={1,2,3}$, $A={1}$, $a_1={1}$, $a_2={2}$, $a_3={3}$,[/tex] and [tex]a_4={2,3}$.[/tex]

Then[tex]$A\subseteq\bigcup_{i=1}^4 a_i$ and $\bigcup_{i=1}^3 a_i\not\subseteq\bigcup_{i=1}^4 a_i$.[/tex]

Therefore,[tex]$A\cup\bigcup_{i=1}^3 a_i=\bigcup_{i=1}^4 a_i$[/tex] and [tex]A\cup\bigcup_{i=1}^4 a_i\neq\bigcup_{i=1}^4 a_i.[/tex]

For similar question on subset.

https://brainly.com/question/30799313

#SPJ11

(a)If ACB, then CB  is a subset of C.

(b) AUB-AU is not a subset of AUB.

(c) UAa3υλα equality fails in this case.

(a) If ACB, then CB:
Let x be an element of C. If x is in A, then it is also in B (since ACB), and therefore in C (since B is a subset of C). If x is not in A, then it is still in C (since C is a superset of B), and therefore in B (since ACB). In either case, x is in CB, so CB is a subset of C.

(b) AUB-AU:
Let x be an element of AUB. If x is in A, then it is not in AU (since it is already in A), and therefore it is in AUB-AU. If x is not in A, then it must be in B (since it is in AUB), and therefore it is not in AU (since it is not in A), and therefore it is in AUB-AU. Thus, every element of AUB is also in AUB-AU, and therefore AUB-AU is a subset of AUB. On the other hand, if x is in AU but not in AUB, then it must be in U (since it is not in A or B), which contradicts the assumption that A and B are subsets of X. Therefore, AUB-AU is not a subset of AUB.

(c) UAa3υλα; give an example where equality fails:
Let X = {1,2,3}, A = {1}, B = {2}, and Αα = {1,3}. Then UAa3υλα = {1,2,3} = X, but AUB = {1,2} and AU = {1}, so AUB-AU = {2} is not equal to X. Therefore, equality fails in this case.
Visit here to learn more about subset:

brainly.com/question/24138395

#SPJ11

The required probability is 13/20.

Given that,

Number of girls = 14

Number of boys = 8

Since probability = (number of favorable outcomes)/(total outcomes)

Therefore,

The probability of selecting a boy = 8/22

                                                         = 4/11.

We have to find the probability that the second student chosen is a girl, given that the first one was a boy

Since we already know that the first student chosen was a boy,

There are now 13 girls and 7 boys left to choose from.

So,

The probability of selecting a girl as the second student = 13/20

Hence,

The probability that the second student chosen is a girl, given that the first one was a boy, is 13/20.

Learn more about the probability visit:

https://brainly.com/question/13604758

#SPJ1