You use 10.0 mL of solution A, 10.0 mL of solution B, and 70.0 mL of water for your first mixture. What is the initial concentration of KIO3
Complete Question
The complete question is shown on the first uploaded image
Answer:
The initial concentration is [tex]C_f = 0.0022 \ M[/tex]
Explanation:
From the question we are told that
The volume of solution A is [tex]V_i = 10.0 mL[/tex]
The concentration of A is [tex]C_i = 0.0200 \ M[/tex]
The volume of solution B is [tex]V_B = 10.0mL[/tex]
The volume of water is [tex]V_{w } = 70.0 mL[/tex]
Generally the law of dilution is mathematically represented as
[tex]C_i * V_i = C_f * V_f[/tex]
Where [tex]C_f[/tex] is the concentration of the mixture
[tex]V_f[/tex] is the volume of the mixture which is mathematically evaluated as
[tex]V_f = 10 + 10 + 70[/tex]
[tex]V_f = 90mL[/tex]
So
[tex]C_f = \frac{C_i * V_i}{ V_f}[/tex]
substituting values
[tex]C_f = \frac{0.0200 * 10 }{90}[/tex]
[tex]C_f = 0.0022 \ M[/tex]
Note the mixture obtained is [tex]KIO_3[/tex]
The reaction rate is k[Ce4+][Mn2+] for the following reaction: 2Ce4+(aq) + Tl+(aq) + Mn2+(aq) → 2Ce3+(aq) + Tl3+(aq) + Mn2+(aq What is the catalyst?
Answer:
Manganese (II) ion, Mn²⁺
Explanation:
Hello,
In this case, given the overall reaction:
[tex]2Ce^{4+}(aq) + Tl^+(aq) + Mn^{2+}(aq) \rightarrow 2Ce^{3+}(aq) + Tl^{3+}(aq) + Mn^{2+}(aq)[/tex]
Thus, since manganese (II) ion, Mn²⁺ is both at the reactant and products, we infer it is catalyst, since catalysts are firstly consumed but finally regenerated once the reaction has gone to completion. Moreover, since inner steps are needed to obtain it, we can infer that the given rate law corresponds to the slowest step that is related with the initial collisions between Ce⁴⁺ and Mn²⁺
Best regards.
How fast are the atoms moving if the temperature of a gas is cold?
A. very, very slowly
B. they are stagnant
C. very, very quickly
Answer:
i think option a is correct answer because when there is low temperature then the kinetic enegry will be very less and the atoms moves very slowly.
Answer:
A. very, very slowly
Explanation:
A is the answer because atoms will move faster in hot gas than in cold gas.
The substance nitrogen has the following properties: normal melting point: 63.2 K normal boiling point: 77.4 K triple point: 0.127 atm, 63.1 K critical point: 33.5 atm, 126.0 K At temperatures above 126 K and pressures above 33.5 atm, N2 is a supercritical fluid . N2 does not exist as a liquid at pressures below atm. N2 is a _________ at 16.7 atm and 56.5 K. N2 is a _________ at 1.00 atm and 73.9 K. N2 is a _________ at 0.127 atm and 84.0 K.
Answer:
- N2 does not exist as a liquid at pressures below 0.127 atm.
- N2 is a solid at 16.7 atm and 56.5 K.
- N2 is a liquid at 1.00 atm and 73.9 K
- N2 is a gas at 0.127 atm and 84.0 K.
Explanation:
Hello,
At first, we organize the information:
- Normal melting point: 63.2 K.
- Normal boiling point: 77.4 K.
- Triple point: 0.127 atm and 63.1 K.
- Critical point: 33.5 atm and 126.0 K.
In such a way:
- N2 does not exist as a liquid at pressures below 0.127 atm: that is because below this point, solid N2 exists only (triple point).
- N2 is a solid at 16.7 atm and 56.5 K: that is because it is above the triple point, below the critical point and below the normal melting point.
- N2 is a liquid at 1.00 atm and 73.9 K: that is because it is above the triple point, below the critical point and below the normal boiling point.
- N2 is a gas at 0.127 atm and 84.0 K: that is because it is above the triple point temperature at the triple point pressure.
Best regards.
What is the absolute magnitude of the rate of change for [NH3] if the
rate of change for [Hz] is 9.00 M/s in the reaction 2 NH3(g) → N2(g) +
3 H2(g)?
Answer:
[tex]r_{NH_3,abs} =6.00\frac{M}{s}[/tex]
Explanation:
Hello,
In this case, we can write the law of mass action for the undergoing chemical reaction, based on the rates and the stoichiometric coefficients:
[tex]\frac{1}{-2}r_{NH_3} =\frac{1}{1} r_{N_2}=\frac{1}{3}r_{H_2}[/tex]
In such a way, knowing the rate of formation hydrogen (H₂), we can know the rate of change of ammonia, that must be negative for consumption:
[tex]r_{NH_3} =\frac{-2}{3}r_{H_2}=\frac{-2}{3}*9.00\frac{M}{s} \\\\r_{NH_3} =-6.00\frac{M}{s}[/tex]
Nevertheless, the absolute magnitude will be positive:
[tex]r_{NH_3,abs} =6.00\frac{M}{s}[/tex]
Best regards.
Name the compound Ga S3
Answer:
Gallium(III) sulfide1.60 mL of a suspension of 320.0 mg/5.00 mL aluminum hydroxide is
added to 2.80 mL of hydrochloric acid. What is the molarity of the
hydrochloric acid?
Answer:
1.41 M
Explanation:
First we must use the information provided to determine the concentration of the aluminum hydroxide.
Mass of aluminum hydroxide= 320mg = 0.32 g
Molar mass of aluminum hydroxide= 78 g/mol
Volume of the solution= 5.00 ml
From;
m/M= CV
Where;
m= mass of aluminum hydroxide= 0.32 g
M= molar mass of aluminum hydroxide = 78 g/mol
C= concentration of aluminum hydroxide solution = the unknown
V= volume of aluminum hydroxide solution = 5.0 ml
0.32 g/78 g/mol = C × 5/1000
C = 4.1×10^-3/5×10^-3
C= 0.82 M
Reaction equation;
Al(OH)3(aq) + 3HCl(aq) -----> AlCl3(aq) + 3H2O(l)
Concentration of base CB= 0.82 M
Volume of base VB= 1.60 ml
Concentration of acid CA= the unknown
Volume of acid VA= 2.80 ml
Number of moles of acid NA = 3
Number of moles of base NB= 1
Using;
CA VA/CB VB = NA/NB
CAVANB = CBVBNA
CA= CB VB NA/VA NB
CA= 0.82 × 1.60 × 3/ 2.80 ×1
CA= 1.41 M
Therefore the concentration of HCl is 1.41 M
List the following compounds in order from strongest acid to weakest acid. Rank the acids from strongest to weakest.
CH2CHCH2COOH CH2CH2CH2COOH CH3CHCH2COOH CH3CH2CH2COOH
Strongest Weakest
Answer:
CH3CH2CH2COOH<CH2(F)CH2CH2COOH<CH3CH(F)CH2COOH<CH2(F)CH(F)CH2COOH
Explanation:
We know that the presence of highly electronegative elements in carboxylic acid molecules lead to -I inductive effect. This implies that electrons are withdrawn along the chain towards the electronegative element. As electrons are withdrawn towards the electronegative element, the electron cloud of the carbonyl- hydrogen bond in the acid weakens and the hydrogen can now be easily lost as a proton, that is , the molecule becomes more acidic.
The -I inductive effect increases with increase in the number of electronegative elements present in the molecule and the proximity of the electronegative element to the carbonyl group. The closer the electronegative element is to the carbonyl group, the greater the acidity of the molecule since the -I inductive effect dies out with increasing distance from the carbonyl group. Also, the more the number of electronegative elements in the molecule, the greater the - I inductive effect and the greater the acidity of the molecule, hence the answer.
The pressure in an automobile tire is 2.0 atm at 27°C. At the end of a journey on a hot summer day the pressure has risen to 2.2 atm. What is the temperature of the air in the tire? a. 272.72 K b. 330 K c. 0.014 K d. 175 K
Hey there!
For this we can use the combined gas law:
[tex]\frac{P_{1}V_{1} }{T_{1}} = \frac{P_{2}V_{2} }{T_{2}}[/tex]
We are only working with pressure and temperature so we can remove volume.
[tex]\frac{P_{1} }{T_{1}} = \frac{P_{2} }{T_{2}}[/tex]
P₁ = 2 atm
T₁ = 27 C
P₂ = 2.2 atm
Plug these values in:
[tex]\frac{2atm}{27C} = \frac{2.2atm}{T_{2}}[/tex]
Solve for T₂.
[tex]2atm = \frac{2.2atm}{T_{2}}*27C[/tex]
[tex]2atm * T_{2}={2.2atm}*27C[/tex]
[tex]T_{2}={2.2atm}\div2atm*27C[/tex]
[tex]T_{2}=1.1*27C[/tex]
[tex]T_{2}=29.7C[/tex]
Convert this to kelvin and get 302.85 K, which is closest to B. 330 K.
Hope this helps!
Given the information below, which is more favorable energetically, the oxidation of succinate to fumarate by NAD+ or by FAD? Fumarate + 2H+ + 2e- → Succinate E°´ = 0.031 V NAD+ + 2H+ + 2e- → NADH + H+ E°´ = -0.320 FAD + 2H+ + 2e- → FADH2 E°´ = -0.219
Answer:
Oxidation by FAD
Explanation:
1. Oxidation by NAD⁺
Succinate ⇌ Fumarate + 2H⁺ + 2e⁻; E°´ = -0.031 V
NAD⁺ + 2H⁺ + 2e⁻ ⇌ NADH + H⁺; E°´ = -0.320 V
Succinate + NAD⁺ ⇌ Fumarate + NADH + H⁺; E°' = -0.351 V
2. Oxidation by FAD
Succinate ⇌ Fumarate + 2H⁺ + 2e⁻; E°´ = -0.031 V
FAD + 2H⁺ + 2e⁻ ⇌ FADH₂; E°´ = -0.219 V
Succinate + FADH₂ ⇌ Fumarate + FAD; E°' = -0.250 V
Neither reaction is energetically favourable, but FAD has a more positive half-cell potential.
FAD is the stronger oxidizing agent.
The oxidation by FAD has a more positive cell potential, so it is more favourable energetically.
what is the electron configuration of the iodide ion?
A. 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s²
B. 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶
C. 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s²5p⁶
D. 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰
Answer:
the answer to this question is C
The electron configuration of the iodide ion is 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s²5p⁶. The correct option is option C.
What is electron configuration ?The arrangement of an atom's or molecule's electrons in their respective atomic or molecular orbitals is known as its electron configuration; for instance, the electron configuration of the neon atom is 1s2 2s2 2p6.
According to electronic configurations, electrons move individually within each orbital while interacting with the average field produced by all other orbitals. The corrosion potential and reactivity of an atom may be calculated from its electron configuration. The electron configuration of the iodide ion is 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s²5p⁶.
Therefore, the correct option is option C.
To learn more about electron configuration, here:
https://brainly.com/question/30161188
#SPJ6
which conditions make snow
Answer:
It depends on the weather.
Explanation:
Like rain and hail, snow comes from the water vapor that forms the clouds, but obviously its formation is different: snow forms when the temperature is low in the atmosphere. In these conditions the water vapor drops freeze and when they collide form tiny crystals that join together to form snowflakes, which fall to Earth when they are heavy enough.
neeeeed helpppppppppp
Answer:
Option C. Will always.
Explanation:
A spontaneous reaction is a reaction that occurs without an external supply of heat.
This implies that spontaneous reaction will always occur as no external supply of heat is needed.
What is the core charge of helium and why?
Answer:
Formula for effective nuclear charge is as follows. So, for He atom value of S = 0.30 because the electrons are present in 1s orbital. Therefore, calculate the effective nuclear charge for helium as follows. Thus, we can conclude that the effective nuclear charge for helium is 1.7
Explanation:
The effective nuclear charge experienced by a 1s electron in helium is +1.70.
A sample of a compound is made up of 57.53 g C, 3.45 g H, and 39.01 g F. Determine the empirical formula of this compound.
Answer:
C7H5F3
Explanation:
The following data were obtained from the question:
Mass of Carbon (C) = 57.53g
Mass of Hydrogen (H) = 3.45g
Mass of Fluorine (F) = 39.01g
The empirical formula of the compound can be obtained as follow:
C = 57.53g
H = 3.45g
F= 39.01g
Divide each by their molar mass
C = 57.53/12 = 4.79
H = 3.45/1 = 3.45
F = 39.01/19 = 2.05
Divide each by the smallest
C = 4.79/2.05 = 2.3
H = 3.45/2.05 = 1.7
F = 2.05/2.05 = 1
Multiply through by 3 to express in whole number
C = 2.3 x 3 = 7
H = 1.7 x 3 = 5
F = 1 x 3 = 3
Therefore, the empirical formula for the compound is C7H5F3
Identify each of the following half-reactions as either an oxidation half-reaction or a reduction half-reaction.
H2(g) → 2H+(aq) + 2e- oxidation
Cu2+(aq) → + 2e-Cu(s) reduction
Write a balanced equation for the overall redox reaction. Use smallest possible integer coefficients.
Answer:
H₂(g) + Cu²⁺(aq) → 2H⁺(aq) + Cu(s)
Explanation:
In a redox reaction, one half-reaction is the oxidation (where the atom loss electrons) whereas the other reaction is the reduction (Where the atom is gaining electrons.
In the reactions:
H₂(g) → 2H⁺(aq) + 2e⁻ oxidation
Here, the reaction is written as the oxidation because the hydrogen H₂ is in oxidation state 0 and H⁺ in +1. That means each atom is loosing one electron.
Cu²⁺(aq) + 2e⁻ → Cu(s) reduction
And here, the Cu²⁺ is in +2 oxidation state and after the reaction is in Cu(s) 0 state. Thus, each atom is gaining 2 electrons.
The sum of both reactions is:
H₂(g) + Cu²⁺(aq) + 2e⁻ → 2H⁺(aq) + 2e⁻ + Cu(s)
Subtracting the electrons in both sides of the reaction:
H₂(g) + Cu²⁺(aq) → 2H⁺(aq) + Cu(s)an ideal gas is at a pressure 1.00 x 10^5 N/m^2 and occupies a volume 11.00 m^3. If the gass is compressed to a volume of 1.00 m^3 while the temperature remains constant, what will be the new pressure in the gas.
Answer:
[tex]P_2=1.1x10^6Pa[/tex]
Explanation:
Hello.
In this case, we can solve this problem by applying the Boyle's law which allows us to understand the pressure-volume behavior as a directly proportional relationship:
[tex]P_1V_1=P_2V_2[/tex]
In such away, knowing the both the initial pressure and volume and the final volume, we can compute the final pressure as shown below:
[tex]P_2=\frac{P_1V_1}{V_2}[/tex]
Consider that the given initial pressure is also equal to Pa:
[tex]P_2=\frac{1.00x10^5Pa*11.00m^3}{1.00m^3}\\ \\P_2=1.1x10^6Pa[/tex]
Which stands for a pressure increase when volume decreases.
Regards.
The element nitrogen forms a(n) _______ with the charge . The symbol for this ion is , and the name is . The number of electrons in this ion is .
Answer:
The element nitrogen forms an anion with the charge -3. The symbol for this ion is N³⁻, and the name is nitride. The number of electrons in this ion is 10.
Explanation:
The element nitrogen is in the Group 15 in the Periodic Table, so it tends to gain 3 electrons (3 negative charges) to fill its valance shell with 8 electrons.
The element nitrogen forms an anion with the charge -3. The symbol for this ion is N³⁻, and the name is nitride. The number of electrons in this ion is 10 (the original 7 plus the 3 gained). It is isoelectronic with the gas Neon, which accounts for its stability.
The gas evolved in the metal carbonate reaction with acid turns limewater milky The milky substance formed is
Answer:
The gas evolved because of reaction of acid with metal carbonate or metal hydrogen carbonate turns lime water milky. This shows that the gas is carbon dioxide gas. This happens because of formation of white precipitate of calcium carbonate.
Hope it helps you!
The milky substance formed is CO₂ gas.
What leads to the formation of white precipitate of calcium carbonate ?The gas evolved because of reaction of acid with metal carbonate or metal hydrogen carbonate turns lime water milky. This shows that the gas is carbon dioxide gas.
This happens because of formation of white precipitate of calcium carbonate.
Lime water turns milky when the gas liberated from an acidified carbonate solution is passed into it.
The liberated CO₂ reacts with lime water to give calcium bicarbonate as the precipitate.
Hence, the milky substance formed is CO₂ gas.
Learn more about white precipitate, here:
https://brainly.com/question/3518266
#SPJ2
If the particles of matter that make up a substance are relatively far apart and can move freely, the substance is in what state?
gaseous
liquid
solid
Answer:
Gaseous
Explanation:
Gasses can move freely and do not form the shape of their containers
Liquids are more free than solids, but they conform to the shape of their container
Solids are not free
A 1.00 liter solution contains 0.31 M sodium acetate and 0.40 M acetic acid. If 0.100 moles of barium hydroxide are added to this system, indicate whether the following statements are TRUE or FALSE . (Assume that the volume does not change upon the addition of barium hydroxide.)
a. The number of moles of CH3COOH will remain the same.
b. The number of moles of CH3COO- will increase.
c. The equilibrium concentration of H3O+ will decrease.
d. The pH will decrease.
e. The ratio of [CH3COOH] / [CH3COO-] will remain the same.
Answer and Explanation:
The buffer solution is composed by sodium acetate (CH₃COONa) and acetic acid (CH₃COOH). Thus, CH₃COOH is the weak acid and CH₃COO⁻ is the conjugate base, derived from the salt CH₃COONa.
If we add a strong base, such as barium hydroxide, Ba(OH)₂, the base will dissociate completely to give OH⁻ ions, as follows:
Ba(OH)₂ ⇒ Ba²⁺ + 2 OH⁻
The OH⁻ ions will react with the acid (CH₃COOH) to form the conjugate base CH₃COO⁻.
Initial number of moles of CH₃COOH = 0.40 mol/L x 1 L = 0.40 mol
Initial number of moles of CHCOO⁻= 0.31 mol/L x 1 L = 0.31 mol
moles of OH- added: 2 OH-/mol x 0.100 mol/L x 1 L = 0.200 OH-
According to this, the following are the answers to the sentences:
a. The number of moles of CH₃COOH will remain the same ⇒ FALSE
The number of moles of CH₃COOH will decrease, because they will react with OH⁻ ions
b. The number of moles of CH₃COO⁻ will increase ⇒ TRUE
Moles of CH₃COO⁻ will be formed from the reaction of the acid (CH₃COOH) with the base (OH⁻ ions)
c. The equilibrium concentration of H₃O⁺ will decrease ⇒ FALSE
The equilibrium concentration of OH⁻ is increased
d. The pH will decrease⇒ FALSE
pKa for acetic acid is 4.75. We add the moles of base to the acid concentration and we remove the same number of moles from the conjugate base in the Henderson-Hasselbach equation to calculate pH:
[tex]pH= pKa + log \frac{[conjugate base + base]}{[acid - base]}[/tex]
pH = 4.75 + log (0.31 mol + 0.20 mol)/(0.40 mol - 0.20 mol) = 5.15
Thus, the pH will increase.
Calculate the vapor pressure of water above the solution. The vapor pressure of pure water at this temperature is 0.0313 atm. Assume complete dissociation of the solute. Express your answer in atmospheres to three significant figures. Pvap = atm
The question is incomplete, the solute was not given.
Let the solute be K₂CrO₄ and the solvent be water
Complete Question should be like this:
The density of a 0.438 M solution of potassium chromate (K₂CrO₄) at 298 K is 1.063 g/mL.
Calculate the vapor pressure of water above the solution. The vapor pressure of pure water at this temperature is 0.0313 atm. Assume complete dissociation.
Pvap = ________atm
Answer:
Pvap (of water above the solution) = 0.0306 atm
Dissolution of the solute
K₂CrO₄ => 2K⁺ + Cr₂O₄²⁻
Explanation:
Given
volume of solution = 1 Litre = 1000 mL of the solution
density of the solution = 1.063 g/mL
concentration of the solution= 0.438M
temperature of the solution= 298 K
vapour pressure of pure water = 0.0313atm
Recall: density = mass/volume
∴mass of solution = volume x density
m = 1000 x 1.063 = 1063 g
To calculate the moles of K₂CrO₄ = volume x concentration
= 1 x 0.438 = 0.438 mol
Mass of K₂CrO₄ = moles x molar mass = 0.438 x 194.19 = 85.055 g
Mass of water = mass of solution - mass of K₂CrO₄
= 1063 - 85.055 = 977.945 g
moles of water = mass/molar mass
∴ moles of water = 977.945/18.02 = 54.27 mol
Dissolution of the solute
K₂CrO₄ => 2K⁺ + Cr₂O₄²⁻
(dissolution is the process by which solute(K₂CrO₄) is passed into solvent(H₂O) to form a solution
moles of ions = 3 x moles of K₂CrO₄
= 3 x 0.438 = 1.314 mol
Vapor pressure of solution = mole fraction of water x vapor pressure of water
= 54.27/(54.27 + 1.314) x 0.0313 = 0.0306 atm
According to Le Châtelier's principle, how would a change in pressure affect a
gaseous system in equilibrium?
Answer:
Le Châtelier's principle states that when a chemical system at equilibrium is distributed by a change in conditions, the equilibrium position will shift in a direction that tends to counteract the change.
Therefore, when there is a change in pressure, the equilibrium will counteract the change by reducing/increasing the pressure through adjusting the no. of moles of gas.
Note: At constant temperature and volume the pressure of a gas is directly proportional to the number of moles of gas.
For example, when there's an increase in total pressure, the equilibrium position will shift to the side with a smaller no. of moles of gas so as to reduce the pressure.
Answer:
The equilibrium would shift to reduce the pressure change
Explanation:
A sample of gas is observed to effuse through a pourous barrier in 4.98 minutes. Under the same conditions, the same number of moles of an unknown gas requires 6.34 minutes to effuse through the same barrier. The molar mass of the unknown gas is:________.
g/mol.
Answer:
The molar mass of the unknown gas is [tex]\mathbf{ 51.865 \ g/mol}[/tex]
Explanation:
Let assume that the gas is O2 gas
O2 gas is to effuse through a porous barrier in time t₁ = 4.98 minutes.
Under the same conditions;
the same number of moles of an unknown gas requires time t₂ = 6.34 minutes to effuse through the same barrier.
From Graham's Law of Diffusion;
Graham's Law of Diffusion states that, at a constant temperature and pressure; the rate of diffusion of a gas is inversely proportional to the square root of its density.
i.e
[tex]R \ \alpha \ \dfrac{1}{\sqrt{d}}[/tex]
[tex]R = \dfrac{k}{d}[/tex] where K = constant
If we compare the rate o diffusion of two gases;
[tex]\dfrac{R_1}{R_2}= {\sqrt{\dfrac{d_2}{d_1}}[/tex]
Since the density of a gas d is proportional to its relative molecular mass M. Then;
[tex]\dfrac{R_1}{R_2}= {\sqrt{\dfrac{M_2}{M_1}}[/tex]
Rate is the reciprocal of time ; i.e
[tex]R = \dfrac{1}{t}[/tex]
Thus; replacing the value of R into the above previous equation;we have:
[tex]\dfrac{R_1}{R_2}={\dfrac{t_2}{t_1}}[/tex]
We can equally say:
[tex]{\dfrac{t_2}{t_1}}= {\sqrt{\dfrac{M_2}{M_1}}[/tex]
[tex]{\dfrac{6.34}{4.98}}= {\sqrt{\dfrac{M_2}{32}}[/tex]
[tex]M_2 = 32 \times ( \dfrac{6.34}{4.98})^2[/tex]
[tex]M_2 = 32 \times ( 1.273092369)^2[/tex]
[tex]M_2 = 32 \times 1.62076418[/tex]
[tex]\mathbf{M_2 = 51.865 \ g/mol}[/tex]
HELPPP.
Which of the following is a property of matter?
O A. It takes up space.
OB. It is everywhere.
O C. It is constantly changing.
O D. It cannot be divided.
Answer:
a
Explanation:
Matter can be volume or density. So, this concludes that it is when it takes up space.
Answer: A.
Explanation:
it takes up space
Chemistry question. Image attached.
Answer:
The answer to your question is given below
Explanation:
The balanced equation for the reaction is given below:
CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)
1. Writing an expression for the equilibrium constant, K.
The equilibrium constant, K for a reaction is simply the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.
Thus, we can write the equilibrium constant, K for the reaction as follow:
CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)
K = [CaCO3] [H2]⁴ / [CaO] [CH4] [H2O]²
2. Based on the value of K, more products will be in the equilibrium mixture since the value of K is a positive large number.
How many minutes would be required to electroplate 25.0 grams of chromium by passing a constant current of 4.80 amperes through a solution containing CrCl3
Answer:
483.27 minutes
Explanation:
using second faradays law of electrolysis
which resonance form would be the most stable contributor to the intermediate arenium ion produced by electrophilic bromination of methoxybenzene
The question is incomplete as the options are missing, however, the correct complete question is attached.
Answer:
The correct answer is option A. ( check image)
Explanation:
The most stable contributor to the intermediate arenium ion produced by electrophilic bromination of methoxybenzene in given options is option a due to the fact that this resonating form follows the octet rule is satisfied for all atoms and additional π bond is present in between C-O that makes it more stable, while in other options there are positive charge which means they do not follows octet rule completely.
Thus, the correct answer is option A. ( check image)
The rate at which two methyl radicals couple to form ethane is significantly faster than the rate at which two tert-butyl radicals couple. Offer two explanations for this observation.
Answer:
1. stability factor
2. steric hindrance factor
Explanation:
stability of ethane is lesser to that of two tert-butyl, so ethane will be more reactive and faster.
ethane is less hindered and more reactive, while two tert-butyl is more hindered and less reactive
What volume of CH4(g), measured at 25oC and 745 Torr, must be burned in excess oxygen to release 1.00 x 106 kJ of heat to the surroundings
Answer:
[tex]V=27992L=28.00m^3[/tex]
Explanation:
Hello,
In this case, the combustion of methane is shown below:
[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]
And has a heat of combustion of −890.8 kJ/mol, for which the burnt moles are:
[tex]n_{CH_4}=\frac{-1.00x10^6kJ}{-890.8kJ/mol}= 1122.6molCH_4[/tex]
Whereas is consider the total released heat to the surroundings (negative as it is exiting heat) and the aforementioned heat of combustion. Then, by using the ideal gas equation, we are able to compute the volume at 25 °C (298K) and 745 torr (0.98 atm) that must be measured:
[tex]PV=nRT\\\\V=\frac{nRT}{P}=\frac{1122.6mol*0.082\frac{atm*L}{mol*K}*298K}{0.98atm}\\\\V=27992L=28.00m^3[/tex]
Best regards.