The metal wing of an airplane acts like a ""wire"" flying through Earth’s magnetic field. A voltage is induced between the wing tips, and a current flows along the wing, but only for a short time. Why does the current stop even though the airplane continues flying through Earth’s magnetic field?

The specific heat capacity of the metal can be calculated using the equation: q = mCΔT, where q is the heat transfer, m is the mass of the metal, C is the specific heat capacity, and ΔT is the change in temperature. The heat transfer from the metal to the water can be determined as q = mCΔT = 100 g * C * (24.6 - 95.0) °C. The heat transfer from the water to the metal can be determined as q = mCΔT = 140.0 g * 4.184 J/g°C * (24.6 - 20.0) °C. The specific heat capacity can then be calculated as C = q / (mΔT).

The temperature change of the water and steel is used to determine the unique warmth capacity of the steel by means of calculating the warmth switch between the two materials. The warmth switch between the water and metal may be calculated using the equation: q = mcΔT, where q is the heat transfer, m is the mass of the substance, c is the precise heat capability, and ΔT is the trade in temperature. By means of the usage of this equation for each the water and metal, the heat switch among the 2 materials may be calculated and the specific heat potential of the steel can be determined.

To know more about Metal visit: https://brainly.com/question/28650063

#SPJ4

The specific heat capacity of the metal is 140 J/kg°C.

A metal is a chemical element that is typically characterized by its high electrical conductivity, thermal conductivity, and luster. It is usually a dense, malleable, and ductile material that is a good conductor of heat and electricity. Examples of metals include copper, silver, gold, iron, and aluminum.

The specific heat capacity of the metal can be calculated using the formula:

ΔQ = mCΔT

where ΔQ is the heat transferred, m is the mass of the metal, C is the specific heat capacity, and ΔT is the change in temperature.

First, find the heat transferred:

ΔQ = mCΔT = (140.0 g + 100.0 g)(24.6 °C - 20.0 °C) = 240.0 g * 4.6 °C = 1101.6 J

Next, find the heat absorbed by the metal:

ΔQ = mCΔT = 100.0 g * (24.6 °C - 95.0 °C) = -9700 J

Finally, solve for the specific heat capacity:

C = ΔQ / mΔT = -9700 J / 100.0 g * (24.6 °C - 95.0 °C) = -9700 J / 100.0 g * -75.4 °C = 140 J/kg°C

To know more about heat visit:

https://brainly.com/question/23709392

#SPJ4

The Law of Conservation of Energy states that energy cannot be created or destroyed, only transferred or converted from one form to another. This means that the total amount of energy in a closed system remains constant.

As the object falls to the ground, its potential energy is converted into kinetic energy. The potential energy is determined by the object's mass and its height above the ground. As the object falls, its height decreases and its potential energy decreases, but this decrease in potential energy is compensated by an increase in kinetic energy. The kinetic energy is determined by the object's mass and its velocity. As the object's height decreases and its velocity increases, its kinetic energy increases.

As the object falls, the total amount of energy remains constant. The initial potential energy of 10 J is equal to the final kinetic energy of the object. This is an example of the Law of Conservation of Energy in action. The object's potential energy is transformed into kinetic energy, but the total amount of energy remains the same.

The equation for the system's gravitational potential energy is U = − G * (m2 / R). and G * (m2 / R) is the amount of effort the gravitational force must do to move the particle from the sphere's surface to its centre.

(a) The formula U = - G * (Mm / r), where G is the gravitational constant, M is the mass of the sphere, and m is the mass of the particle, may be used to compute the gravitational potential energy of the system. Here, M = m U = - G * (m2 / R)

(b) The particle's initial potential energy when it is on the sphere's surface is Ui = - G * (m2 / R), and its final potential energy when it is in the sphere's centre is Uf = 0. Work completed equals Uf - Ui work completed equals 0 - (- G * (m2 / R)) work completed equals G * (m2 / R).

G * (m2 / R) represents the amount of effort the gravitational force must do to move a particle from the sphere's surface to its centre.

learn more about gravitational force here:

https://brainly.com/question/12528243

#SPJ4

Radiant energy is also called responses thermal energy (b)  light energy is correct option.

Radiant energy in physics refers to the energy of electromagnetic and gravitational radiation. Radiant energy is particularly studied via radiometry. Its SI unit for energy is the joule (J). Other than radiometry, electromagnetic energy is denoted by the letters E or W. The phrase is specifically used when electromagnetic radiation is released into the environment by a source. For the human eye, this radiation might be visible or invisible.

Energy included in electromagnetic waves is known as radiant energy. These consist of microwaves, infrared, radio waves, ultraviolet light, and visible light. The random molecular movements of substances store thermal energy, often known as heat energy.

To know more about radiant energy

https://brainly.com/question/29102331

#SPJ4

The water released from the reservoir and passes through turbines to produce electricity.

At the plant level, water flows through a pip also known as a penstock, and then spins the blades in a turbine, which, in turn, spins a generator that ultimately produces electricity.

Hydro turbines, it transform moving water's kinetic energy into mechanical energy, and this mechanical energy is converted into electricity using a hydropower generator. Hydropower turbines contain blades, which spin to produce electricity. Hydro turbines work on Faraday's principles.

To know more about electricity visit :

https://brainly.com/question/12791045

#SPJ4

When a turbine's blades are turned by water, electricity is produced and sent to the power plant's users.

To learn more about turbine's blades refer

https://brainly.com/question/15321264

#SPJ4

Because potential energy increases with separation distance, Jamal should move the toy car with the greatest separation distance.

The term potential energy is defined as stored energy that depends upon the relative position of various parts of a system. Potential energy is energy that cannot be transfer to kinetic energy. It has the capacity to do work but is not presently doing so.

Because magnetic force is inversely proportional to the separating distance between the cars, the magnetic force acting on the vehicles will decrease as he moves the cars away from each other.

Thus, potential energy increases with separation distance, Jamal should move the toy car with the greatest separation distance.

To learn more about the potential energy, follow the link;

https://brainly.com/question/24284560

#SPJ1

The conservation of charge states that charge cannot be created or destroyed, but can be transferred between objects.

How does the conservation of charge affect the behavior of electric circuits?

The conservation of charge states that charge cannot be created or destroyed, it can only be transferred from one object to another. This principle affects the behavior of electric circuits by ensuring that the total charge in a closed circuit remains constant. This means that the charge flowing into a circuit must equal the charge flowing out of the circuit. If there is an imbalance, the circuit will not function properly.

The conservation of charge also helps to explain the behavior of electric charges in different types of circuits, such as series and parallel circuits.

To know more about Electric Circuits visit:

brainly.com/question/29032441

#SPJ4

Answer:  14,286 kg

Explanation:

Mass and velocity, have a positive correlation to momentum.

The formula to determine momentum is:

Momentum = Mass x Velocity

So, if we want to determine the mass of the object, the formula can be rearranged to look like this:

Momentum/Velocity = Mass

And can be solved by imputing the values given in the question:

Mass = (100 kg*m/s) ÷ (7 m/s)

Mass = 14,286 kg

You are given a set of black coordinate axes  with '(velocity) v (m/s)' on the vertical axis  and 't (s)' on the horizontal axis.

to learn more about velocity from the given link:

https://brainly.com/question/18084516

#SPJ1

You will get a set of black coordinate axes with "(velocity) v (m/s)" on the vertical axis and "t (s)" on the horizontal axis.

What is speed?

Speed ​​is the direction in which a body or object is moving. Speed ​​is primarily a scalar quantity. Speed is essentially a vector quantity. The rate of change of distance and the rate of change of displacement are called velocity. Speed corresponds to the specification of speed and direction of movement (e.g. 60 km/h to the north). Velocity is commonly defined as a vector value of velocity and direction of motion. Simply put, speed is how fast something is moving in one direction.

The speed of a car driving north on a freeway and the speed of a rocket launched into space can be measured by velocity.

to learn more about velocity from the given link:

brainly.com/question/18084516

#SPJ1

With the help of slip rings, an AC generator connects the rotating armature to its external circuit.

A slip ring is an electronic device that permits the transfer of electrical currents and energy from a still structure to a spinning one. Any electrical device that needs to rotate while sending energy or currents can employ a slip ring.

A device that generates electrical energy from mechanical energy is an AC generator. Mechanical energy is provided by steam turbines, gas turbines, and combustion engines as the AC generator's input source. Alternating electrical power in the form of current and voltage is the output.

To learn more about  AC generator here

brainly.com/question/13861856

#SPJ4

The upward throw of a ball. The gravity acceleration is 9.8 m/s2, and its combination 1 speed is 10.8 m/s. So, 1.10 seconds pass between the ball's release and the moment it reaches its highest point.

Gravity's acceleration is constantly downward and constant, however the speed and direction of the acceleration vary. The speed of the ball is zero at its top portion in its trajectory, then it picks up speed again as it descends toward.

Because the acceleration caused by the gravitational force is operating constantly downward at the greatest point when a body was thrown vertically upwards, only that point's velocity is zero. As a result, the velocity is zero due to the acceleration.

To know more about  acceleration visit:

https://brainly.com/question/2303856

#SPJ4

The distance traveled by object is 120 m in given time 10 seconds.

If other information is known, a set of four equations called the kinematic equations can be used to predict unknown information about an object's motion.

The equations can be applied to any motion that can be classified as either a constant velocity motion (with an acceleration of 0 m/s/s) or a constant acceleration motion. They are never permitted to be used over any time frame in which the acceleration is changing.

Four variables are present in each of the kinematic equations. The fquations offer a useful method of predicting details about an object's motion.

The kinematic equation for distance is,

[tex]\boxed{\mathrm{ d = (v +v_0) \dfrac{t}{2} }}[/tex]

Where,

[tex]\mathrm{V_0}[/tex] - initial speed = 8 m/s

V - final speed = 16 m/s

t - time = 10 s

Put the values in formula,

[tex]{\mathbf{ {d = (16+9) \dfrac{10}{2} }}[/tex]

[tex]\mathbf{d=120m}[/tex]

Thus, The distance traveled by object is 120 m in given time 10 seconds.

Learn more about kinematic equation

https://brainly.com/question/24458315

#SPJ4

The ball takes 1.22s to reach the highest point. It remains in the air for 2.44 s when it is thrown vertically upwards.

Equations of motion define the behaviour of physical system in terms of the motion as a function of time.

At the topmost point, v = 0.

Gravitational acceleration is equal to a = -g = -9.8 m/s²

We know one of the equations of motion as, v = u + a t

where, v is final velocity

u is initial velocity

a is acceleration

t is time

Putting in the values in the above equation, we have,

0 = 12 -9.8 t

9.8 t = 12

t = 1.22 s

Thus, the ball reaches the highest point in 1.22 s.

To find out the time in which the ball remains in the air is can be calculated by, v² - u² = 2 a s

where, s is the distance

- 12² = 2 × (-9.8) s

19.6 s = 144

s = 7.34 m

The total time taken by the ball to reach the maximum height is 1.22 s and it takes another 1.22 s to reach the ground.

So, the ball remains in the air for 2.44 s.

The question is incomplete. The complete question is 'Ball is thrown vertically at this speed 12 m/s.'

To know more about time:

https://brainly.com/question/29121495

#SPJ4

Energy must be taken in as heat from the high-temperature reservoir is 1200 J.

The science of thermodynamics examines how heat, work, temperature, and energy are related. The flow of energy from one location to another and from one form to another is broadly what thermodynamics is concerned with.

The efficiency of a heat engine is the ratio of the useful work done by the engine to the total heat energy taken in from the hot reservoir. In this case, the efficiency is 35%. Therefore, the useful work done by the engine is 35% of the total heat energy taken in from the hot reservoir.

If the heat engine does 420 J of useful work, we can use the efficiency formula to find the total heat energy taken in from the hot reservoir:

Total heat energy = (Useful work) / (Efficiency) = 420 J / 0.35 = 1200 J

So, in order for this heat engine to do 420 J of useful work, it must take in 1200 J of energy as heat from the high-temperature reservoir.

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ4

The 1.55 g particle must have a positive charge that is equivalent to 635 N/C times (1.55 g / 9.8 m/s2) = 11.9 C. To maintain equilibrium against gravity.

for a)

a particle's charge must be opposite in sign and magnitude to the electric force acting on it.

mg = qe

1.55 X 10 ⁻³ X 9.81 = q X 635

q = - 0.023 X 10⁻³ C

it willl be negative

We get at q = F / E = 15.09 N / 635 N/C = 0.0237 C after solving for the charge.

This indicates that the particle's charge must be positive and equal to 0.0237 Coulombs in order for it to balance against gravity in the 635 N/C-magnitude downward electric field.

qe = mg

1.6 X 10 ⁻¹⁹ E = 1.67 X 10 ⁻²⁷ X 9.81

E = 1.02 X 10⁻⁷N/C

learn more about gravity here:

https://brainly.com/question/14874038

#SPJ4

The required velocity of the ball when it hits the ground is calculated to be 7.75 m/s.

Mass of the ball = 2 kg

A ball is dropped from a height = 3 m

Velocity = ?

Initial potential energy of the ball Ep = m g h = (2)(10)(3) = 60 J

As the ball reaches the ground, its potential energy becomes zero as it is entirely converted into its kinetic energy Ek.

So, Ek = 60 J

The formula for Ek is said to be 1/2 m v².

Ek = 1/2 m v²

Making v as subject, we have,

v = √(2 Ek/m) = √(2×60/2) = 7.75 m/s

Thus, the velocity of the ball when it hits the ground is 7.75 m/s.

To know more about velocity:

https://brainly.com/question/29880084

#SPJ4

q₃ is approximately -7.58 nC. The direction of the net force on 'q₃' is the negative '-' direction. For the net force on 'q₃' to be zero, 'q₃' can be placed at x = -0.079 m or x = -1.881 m

q₃ is approximately -7.58 nC

The direction of the net force on 'q₃' is the negative '-' direction

For the net force on 'q₃' to be zero, 'q₃' can be placed at x = -0.079 m or x = -1.881 m

1) The force, 'F', between two charged spheres is given as follows;

F = K*q1*q2/r2

By substituting the given values, we have;

F NET = 14117n C *K /320

K = 9 × 10⁹ N·m²·C⁻²

q₃ ≈ -7.58 nC

= -7.58 nC

2) Given that the negative charge, 'q₁' (-4.10 nC), is located at x = 0.250 m, which is on the positive, '+' side of the origin, it will repel the negatively charged 'q₃', to the '-' direction. q₃ will also be attracted to the '-' direction by the positively charged 'q₂' which is at -0.320 m on the negative side of the origin

The net force's direction on q₃ will be in the '-' direction

3) For zero net force, we have;

= K* 2.20 n C /R 1 (2)

The distance between the given point charges, r = 0.250 - (-0.320)) = 0.57 m

Let 'r1' represent the distance between 'q1' and 'q3', therefore, the distance between 'q2' and 'q3' is 0.57 - r1

From which we have;

(r₁)²×4.10 = 2.20 × (0.57 - r₁)²

From the above equation, we have;

95,000·r₁²+ 125,400·r₁-35739 = 0

Solving, using a graphing calculator we get;

r₁ ≈ 0.241 or r₁ ≈ -1.561

Where, 'r₁', is measured from 'q₂', therefore, we have;

r₁ = 0.241 + (-0.320) ≈ -0.079 or r₁ = -1.561 + (-0.320) ≈ -1.881

Therefore, the charge 'q₃' can be placed at x = -0.079 or x = -1.881 for the ne force on it to be zero

To learn more about net force refer

https://brainly.com/question/21317735

#SPJ4

Answer: Therefore, the rock that has a mass of 10 kg and a gravitational energy of 2400 J must be at a height of 24 meters.

Explanation:

How high above the ground is a 10 kg boulder that has 2400 J of gravitational potential energy?

Data:

m = 10 kg

Epg = 1200 J

h = ?

g = 10 m/s²

The formula for gravitational potential energy is:

Where

We must calculate the height, for which we clear the formula, then

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{Ep_g}{m*g} } \end{gathered}$}}[/tex]

We substitute data in the formula and solve:

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{2400 \ J}{10 \ kg*10\frac{m}{s^2} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{2400 \ J}{100 \ kg*\frac{m}{s^2} } } \end{gathered}$}}[/tex]

Before continuing to answer, we must work with the units of Joules, so

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{2400 \ N*m}{100 \ kg*\frac{m}{s^2} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{2400 \not{kg}*\not{\frac{m}{s^2}} *m}{100 \not{kg}*\not{\frac{m}{s^2}} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{2400 \ m}{100} } \end{gathered}$}}[/tex]

[tex]\boxed{\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h\cong24 \ m } \end{gathered}$}}}[/tex]

Therefore, the rock that has a mass of 10 kg and a gravitational energy of 2400 J must be at a height of 24 meters.

The magnitude of the average northward velocity is 27 m/s, while the magnitude of the average southbound velocity is 17 m/s. The total journey average speed is 20.25 m/s to the north.

We must determine the weighted average of the northward and southern velocities in order to get the average speed for the whole journey. We may apply the following formula since the automobile drives north for 3/4 of the time and south for 1/4 of the time:

average speed is (3/4) * (27 m/s) + (1/4) * (-17 m/s)

Since the southbound velocity is moving in the opposite direction of the northward velocity, it is given a negative sign.

Calculating the average velocity results in:

Average speed is equal to (3/4) times 27 m/s plus (1/4) times -17 m/s, or 20.25 m/s.

The total journey average speed is 20.25 m/s to the north.

learn more about velocity here:

https://brainly.com/question/18084516

#SPJ4

The wavelength of x-rays that could be produced when the electrons strike a solid is given by Bragg's equation. Mathematically, it is represented as, n λ = 2 d sinθ.

The X-angle ray's of incidence, and angle of scattering, are the same when it strikes a crystal surface. Additionally, constructive interference will happen when the path difference, d, is equal to a whole number of wavelengths, n.

As we require wavelength, let us make it as the subject in the above equation. Then we have, λ = 2 d sinθ/n

where,

d is the distance between atoms' planes

θ is the angle of scattering

n is the path difference

To know more about x-rays:

https://brainly.com/question/29855408

#SPJ4

(1) The force exerted by the hammer claws on the nail is 67.54 N.

(2) The the force exerted by the surface on the point of contact with the hammer head is 124 N.

The force exerted by the hammer claws on the nail is calculated by applying the following formula.

Fy = W sinθ

where;

Fy = 124 N x  sin ( 33 )

Fy = 67.54 N

The the force exerted by the surface on the point of contact with the hammer head is calculated as follows;

Fn = W sin (90)

Fn = 124 N

Learn more about parallel force here: https://brainly.com/question/14960101

#SPJ1

The height of the apartment is 127.5 m.

The height of the apartment is calculated by applying the following equation.

first equation for your throw; h = ¹/₂g(t +3.4)²

second equation for your friend's throw; h = vt  +  ¹/₂gt²

h = vt  +  ¹/₂gt²

h = 66.64t  +  ¹/₂gt²

now equate the two equations;

¹/₂g(t+3.4)² = 66.64t  +  ¹/₂gt²

¹/₂(9.8)(t² + 6.8t + 11.56) = 66.64t  +  ¹/₂(9.8)t²

4.9(t² + 6.8t + 11.56) = 66.64t  +  4.9t²

4.9t² + 33.32t + 56.64 = 66.64t  +  4.9t²

33.32t = 56.64

t = 1.7 seconds

The height of the apartment is calculated as;

h = ¹/₂g(t +3.4)²

h = ¹/₂(9.8)(1.7 +3.4)²

h = 127.5 m

Learn more about height of fall here: https://brainly.com/question/15611384

#SPJ1

Fetch: A region of an ocean or lake's surface where wind blows in a direction that is basically continuous, producing waves.

An energetic disturbance called a wave moves from one place to another. The only thing that changes when a wave moves is energy, not matter. The substance in which a wave passes is known as the medium. Until it lands in the same place, that medium frequently swings back and forth.

But amplitude, wavelength, energy, and speed are characteristics that all waves share. How much a wave's medium moves is described by its amplitude. Wavelength and frequency both refer to the size and frequency of waves. A wave's speed is its rate of movement.

To know more about waves visit:

https://brainly.com/question/25954805

#SPJ4

Answer:

I do not know this one sorry

Answer:

870 m

Explanation:

d = Vit + 1/2at²

a = ΔV/Δt = (85 m/s - 60 m/s) / (12 s) = (25 m/s) / 12 s = 2.08 m/s²

d = (60 m/s)(12 s) + 1/2 (2.08 m/s²)(12 s)² = 870 m

Answer:

The automobile traveled 870 meters during the 12 second interval.

Explanation:

We can use this kinematics equation to evaluate how far the automobile traveled.

[tex]\overline v=\frac{\Delta x}{\Delta t}[/tex]

Note

[tex]\overline v[/tex] is the average velocity

[tex]\Delta x[/tex] is the change in position (displacement)

[tex]\Delta t[/tex] is the change in time (time interval)

The formula for average velocity is

[tex]\overline v=\frac{V_f-V_o}{2}[/tex]

We are given

[tex]V_f=85\\V_o=60\\\Delta t=12[/tex]

First lets evaluate the average velocity.

[tex]\overline v=\frac{85-60}{2}[/tex]

[tex]\overline v=72.5[/tex]

Rearranging our kinematics equation to isolate [tex]\Delta x[/tex] we get

[tex]\Delta x=\overline v \Delta t[/tex]

Now lets evaluate [tex]\Delta x[/tex].

[tex]\Delta x=72.5*12\\\Delta x=870[/tex]

There are many different ways you can solve this; I could have used a different equation.

Explanation:

ρ = 997kg/m³

v = 375m³

ρ = m/v

m = ρv

m = 997×375

m = 373,875kg

The average angular acceleration of the figure skater during the time interval of 4.6 s is 0.99 rad/s².

For this question:

Then,

angular acceleration = Change in angular velocity / time

α = ω2 - ω1 / t

α = 7.7 - 3.2 / 4.6

α = 4.5/4.6

α = 0.99 rad/s²

Thus, the average angular acceleration of the figure skater during the time interval of 4.6 s is 0.99 rad/s².

To know more about the Angular Acceleration, here

https://brainly.com/question/13014974

#SPJ1

Answer:

The rotation of the earth on its tilted axis is the reason behind the difference in the length of the day and night time in different parts of the earth throughout the year. The annual motion of the Earth is called revolution. Since the path of the Earth is elliptical, the interval between the Earth and the Sun keeps shifting.

Explanation:

The velocity of an object can be calculated using the equation:

velocity = momentum / mass

Given the mass of the object is 3 kg and the forward momentum is 1050 kg-m/sec, we can substitute these values into the equation:

velocity = 1050 kg-m/sec / 3 kg

velocity = 350 m/sec

Therefore, the velocity of the object is 350 m/sec.

The velocity of an object is directly proportional to its momentum. As the velocity of an object increases, so does its momentum. This relationship is described by the equation p = m * v, where p is the momentum, m is the mass of the object and v is its velocity. This equation shows that the momentum of an object is directly proportional to the velocity of the object. This means that if the velocity of an object is doubled, its momentum will also double. Conversely, if the velocity of an object is halved, its momentum will also be halved. Also, If the direction of motion of an object changes it also changes the direction of momentum but the magnitude of momentum will remain the same.

To know more about Momentum visit: https://brainly.com/question/24030570

#SPJ4

An object whose mass is 3 kg is fired from a cannon, giving it a forward momentum has a velocity of  350 m/sec.

The velocity of an object can be calculated using the equation:

                          velocity = momentum / mass

Given the mass of the object is 3 kg and the forward momentum is 1050 kg-m/sec, we can substitute these values into the equation:

                      velocity = 1050 kg-m/sec / 3 kg

                       velocity = 350 m/sec

Therefore, the velocity of the object is 350 m/sec.

The velocity of an object is directly proportional to its momentum. As the velocity of an object increases, so does its momentum. This relationship is described by the equation p = m * v, where p is the momentum, m is the mass of the object and v is its velocity. This equation shows that the momentum of an object is directly proportional to the velocity of the object. This means that if the velocity of an object is doubled, its momentum will also double.

Conversely, if the velocity of an object is halved, its momentum will also be halved. Also, If the direction of motion of an object changes it also changes the direction of momentum but the magnitude of momentum will remain the same.

Learn more about Momentum :

brainly.com/question/24030570

#SPJ4