The mass of a gas molecule (or atom) can be computed from the specific heat at constant volume . The mass of the gas is 6.6 × 10⁻²³ kg. The molar mass of the is 39.74 g/mol
The specific heat at constant volume, cv = 0.075 cal/g °C.
Cv = ( 3/2) R = ( 3/2) ( 1.98) = 2.98 cal /mol K
The molar mass, M = m / n = Cv / cv
= 2.9805/0.075
=39.74 g/mol
The mass = molar mass / Na
The mass = 38.74 / 6.023 × 10²³
The mass = 6.6 × 10⁻²³ kg
This question is incomplete, the complete question is :
The mass of a gas molecule (or atom) can be computed from the specific heat at constant volume cv. given that the specific heat of argon is cv is 0.075 cal/g °C for a gas and calculate (a) the mass of its atom and (b) the molar mass.
To learn more about specific heat here
https://brainly.com/question/13304516
#SPJ4
the exothermic dissolution of mg(oh)2(s) in water is represented by the equation above. the ksp of mg(oh)2 is 1.8 x 10-11. which of the following changes will increase the solubility of mg(oh)2 in an aqueous solution? (a) decreasing the ph (b) increasing the ph (c) adding nh3 to the solution (d) adding mg(no3 )2 to the solution
The exothermic dissolution of mg(oh)2(s)will increase the solubility of mg(oh)2 in an aqueous solution increasing the pH.
The solubility of a substance in water is affected by its solubility product constant (Ksp) and the pH of the solution. Ksp is a measure of the maximum concentration of a substance that can be dissolved in water at a given temperature and pressure. In this case, the Ksp of Mg(OH)2 is 1.8 x 10-11.
Increasing the pH of the solution will increase the solubility of Mg(OH)2 because it will shift the equilibrium of the dissolution reaction in favor of the products. This is because the dissolution reaction is exothermic, meaning that heat is released when the Mg(OH)2 dissolves. This heat release causes the equilibrium to shift towards the product side.
On the other hand, decreasing the pH, adding NH3, or adding Mg(NO3)2 will not affect the solubility of Mg(OH)2 in the solution. Hence options a, c, and d are not correct.
Learn more about dissolution
brainly.com/question/2459213
#SPJ4
NaF MgO
Boiling Point 1695 3600
Na+ Mg2+ F- Cl- O2-
Ionic Radius 76 72 133 181 140
Based on the data in the table above, which of the following statements provides the best prediction for the boiling point of NaCl?
a. NaCl will have a lower boiling point than NaF because the coulombic attractions are weaker in NaCl than in NaF
b. NaCl will have a boiling point between that of NaF and MgO because the covalent character of the bonds in NaCl is intermediate between that of MgO and NaF
c. NaCl will have a higher boiling point than MgO because the ions are spaced farther apart in NaCl
d. NaCl will have a higher boiling point than MgO because the energy required to transfer electrons from the anion to the cation is larger in NaCl than in MgO
The right response is a. NaCl will have a lower boiling point than NaF because the coulombic attractions are weaker in NaCl than in NaF
The strength of the intermolecular interactions between a compound's particles determines its boiling point. The intermolecular interactions in an ionic compound like NaCl are electrostatic forces of attraction between the positive cations and the negative anions. The particles in an ionic compound are called ions. The charge of the ions and their separation from one another define the strength of these forces.
The cations in NaCl are Na+, while the anions are Cl-. Na+ has a radius of 76 pm, while Cl- has a radius of 181 pm. The distance between the ions in NaCl is higher than that in NaF, which has smaller ions, since the radius of Cl- is greater than that of Na+. As a result, in comparison to NaF, the electrostatic forces of attraction between the ions in NaCl are weaker. This indicates that the boiling point of NaCl is lower than that of NaF because less energy is needed to separate the ions in NaCl.
To learn more about boiling point:
https://brainly.com/question/29233996
#SPJ4
at a certain temperature the rate of this reaction is second order in with a rate constant of suppose a vessel contains at a concentration of . calculate how long it takes for the concentration of to decrease to of its initial value. you may assume no other reaction is important. round your answer to significant digits. g
Concentration of A to decrease to 1/e (37%) of its initial value is approximately 2.1 seconds. The rate of a second-order reaction is given by the equation: rate = k[A]^2 .
Where k is the rate constant and [A] is the concentration of the reactant. Given that the rate constant is k = and the initial concentration of A is [A]0 = , we can use the above equation to determine the rate of the reaction.
rate = k[A]^2 = ()( )^2
To find out how long it takes for the concentration of A to decrease to 1/e (37%) of its initial value, we can use the following equation:
[A] = [A]0e^(-kt) ,
Where t is the time in seconds.
Given that we want the final concentration of A to be
1/e (37%) of the initial concentration,
we can set up the following equation:
( ) = ( )e^(-kt) ; and solve for
t: t = -(1/k)ln(1/e)
t = -(1/( ))(ln(1/e))
t = -(1/( ))(ln(0.37))N
t = (1/( ))ln(2.70)
t ≈ 2.1 sec
So the time it takes for the concentration of A to decrease to 1/e (37%) of its initial value is approximately 2.1 seconds.
Learn more about rate constant here :
https://brainly.com/question/20305871
#SPJ4
which of the following would change the vapor pressure of a sample of water in a closed container? 1. decreasing the size of the container 2. lower the container temperature 3. removing water from the container
All of the above options would change the vapor pressure of a sample of water in a closed container.
Decreasing the size of the container would increase the vapor pressure because the number of water molecules in the container would be more concentrated.Lowering the container temperature would decrease the vapor pressure because the water molecules would have less kinetic energy and would therefore be less likely to escape as a gas.Removing water from the container would decrease the vapor pressure because there would be fewer water molecules in the container.Vapor pressure is a measure of the tendency of a substance to turn into a gas at a given temperature. It is related to the kinetic energy of the molecules of the substance, with more energetic molecules having a higher vapor pressure. In a closed container, the vapor pressure of a liquid will be determined by the temperature and the number of molecules present.
It's also worth noting that the vapor pressure of a liquid is also related to its boiling point. The boiling point is the temperature at which the vapor pressure of a liquid equals the atmospheric pressure. As the vapor pressure of liquid increases, its boiling point increases, and as the vapor pressure decreases, its boiling point decreases.
Learn more about vapor pressure here:
https://brainly.com/question/19049170
#SPJ4
a 0.03 mol sample of c3h8 is reacted with just enough o2 to use up both reactants in a 1 l flask at 300 k. the total pressure in the flask after the reaction is complete is closest to which of the following?
Answer:
A) 5.0 atm
Explanation:
You want to know the pressure in a 1 L flask at 300 K when 0.03 mol of C₃H₈ reacts completely with O₂.
ReactionWe suppose the reaction of interest is ...
C₃H₈(g) +5O₂(g) ⇒ 3CO₂(g) +4H₂O(g)
This shows us there are 3+4 = 7 moles of products for each mole of C₃H₈ in the reaction. That is, there will be 0.03 mole × 7 = 0.21 mole of products.
Gas lawThe gas law equation tells us the final pressure can be computed by ...
PV = nRT
P = nRT/V = (0.21 mol)(0.082 L·atm/(mol·K)(300 K)/(1 L) ≈ 5.166 atm
The total pressure in the flask after the reaction is closest to ...
A) 5.0 atm
One of the simplest hydrocarbon polymers is polyethylene, which has repeating ethylene (C₂H4) units. The average degree of polymerization, or number of repeated monomer units, for polyethylene is 150. Calculate
the average molecular weight of polyethylene.
The molar mass of the polyetheylene molecule is 4200 g/mol.
What is the average molecular weight of the polymer?We know that a polymer is said to be formed by the combination of so many units that are joined together. The single units that we have to join together so as to form the polymer is what we call the monomers.
Now we are told that the number of repeated monomer units, for polyethylene is 150.
Molar mass of the ethylene = 2(12) + 4(1) = 28 g/mol
Molar mass of the polyethylene = 150 * 28 g/mol = 4200 g/mol
Learn more about etheylene:https://brainly.com/question/28303854
#SPJ1
We start with a 12.0 M stock solution of HCl, but need 2.0
liters (L) of a 1.5 M HCl solution. We will add water to what
volume (V₁) of the stock solution?
Answer:
4.2 mL
Explanation:
To make the problem more interesting, let's assume that you don't know the formula for dilution calculations.
The idea with diluting a solution is that the number of moles of solute will remain constant after the initial solution is diluted. The only thing that changes in such cases is the volume of the solution.
please help me on my living environment homework
Between 80 to 88%, which is equivalent to that of typical plant meals but somewhat less than that of animal proteins
What nutrients may be found in meals made from crickets?The macro- and micro-mineral elements calcium, potassium, magnesium, phosphorus, sodium, iron, zinc, manganese, and copper are all present in significant amounts in nutrients crickets. Additionally, the crickets are abundant in the necessary amounts of vitamins including those in the B group as well as vitamins A, C, D, E, and K.Between 80 to 88%, which is equivalent to that of typical plant meals but somewhat less than that of animal proteins, S. icipe and G. bimaculatus' protein digestibility was measured. In comparison to plant and animal sources, the iron, zinc, and potassium concentrations of both cricket species were much greater.To learn more about nutrients refer to:
https://brainly.com/question/9348916
#SPJ1
Convert kilocalories to joules. Select the correct units and conversion factors for each step in the following unit roadmap.
kcal > > > > J
Options:
1 kcal/ 10^3 cal
1 cal / 4.184 J
1 kcal/ 4.184 kJ
mol
4.184 kJ/ 1 kcal
10^3/ 1 kcal
cal
4.184 J/ 1 cal
The exact values and conversion factors are kcal > 103 cal/ 1 kcal > cal > 4.184 J/ 1 cal > J for each step.
Conversion factor: What is it?A ratio written as a proportion that equals one is referred to as a conversion factor. In order to have identical measurements represented in new units when we apply calculations to transform units, we multiplied our previous measurement by both the conversion factor.
Why are fundamental conversion elements crucial?Showing someone the precise amount you have will be helpful. help with a mathematical equation, especially one involving chemistry where the solution can be found by following the units. Indicate the person's preferred system of measurement. Molarity is the unit of quantifiable concentration measurement that chemists utilize the most.
To know more about conversion factors visit:
https://brainly.com/question/28366871
#SPJ4
based on the naming rules for ions, which of the following is a negatively charged ion (not a polyatomic ion)?
a. Chlorine is a negatively charged ion based on the naming rules for ions (not a polyatomic ion).
The naming rules for ions are based on the element's name and the charge of the ion. A negatively charged ion is called an "anion". Anions are named by changing the ending of the element's name to -ide. In this case, "chlorine" is the element, and "chloride" is the negatively charged ion, or anion. "Chlorate" and "chlorite" are both polyatomic ions, which are ions composed of multiple atoms. The "ate" and "ite" endings indicate that these are polyatomic ions.
Learn more about polyatomic ions here:
https://brainly.com/question/12852496
#SPJ4
The complete question is :
Based on the naming rules for ions, which of the following is a negatively charged ion (not a polyatomic ion)?
a. chlorine b. chlorate c. chloride d. chlorite
Answer:
Chloride
Explanation:
Negatively charged monatomic ions end in "ide" according to ion naming rules. If there are more electrons (negatively charged) than protons (positively charged), the ion will end with "ide". Sulfide is an example. Sulfur has 6 valence electrons. It could either lose 6 valence electrons or gain 2 to reach noble gas electron arrangement. Usually, the smallest electron exchange occurs, so sulfur would gain 2 valence electrons to fill its outer energy shell. The result would be 16 protons and 18 electrons. The sulfur ion symbol would be written as S2- or sulfide.
You have accidentally broken a test tube and spilled a chemical on the table. What of the following best explains what you should do?
Answer:
A. Use water and paper towels to clean up the spill; place the broken test tube in the disposal container specified by the teacher for Sharp objects
select all the statements that correctly describe the mechanism of the reaction between an organometallic reagent and an aldehyde or ketone.
The correct statements about the mechanism of the reaction between an organometallic reagent and an aldehyde or ketone is all of the above.
The mechanism of the reaction between an organometallic reagent and an aldehyde or ketone is given as :
1) The carbon group of the organometallic reagent will acts as the nucleophile.
2) The intermediate of the reaction is the tetrahedral species.
3) The final step of the reaction is that involves protonation of the alkoxide of oxygen.
Thus, the all the given statements is true for the mechanism reaction between the organometallic reagent and the aldehyde or the ketone .
This question is incomplete, the complete question is :
select all the statements that correctly describe the mechanism of the reaction between an organometallic reagent and an aldehyde or ketone.
The carbon group of the organometallic reagent acts as the nucleophile.
The intermediate of the reaction is a tetrahedral species.
The final step of the reaction involves protonation of the alkoxide oxygen.
All of the above.
To learn more about organometallic reagent here
https://brainly.com/question/29980092
#SPJ4
how many grams and how many atoms of oxygen are in the canister that under standard conditions has 200 dm3 of ozone
Simply multiplying the oxygen molar mass by two yields the molar mass of oxygen gas.
Ozone contains how many oxygen atoms?In our environment, ozone is a gas that exists naturally. O3 is the chemical abbreviation for each ozone molecule, which has three oxygen atoms.One mole of oxygen gas, with the formula O2, weighs 32 g and includes 6.02 x 1023 molecules of oxygen, but also contains 12.04 x 1023 (2 x 6.02 x 1023) atoms of oxygen, since each molecule of oxygen contains two oxygen atoms.Simply multiplying the oxygen molar mass by two yields the molar mass of oxygen gas. Consequently, we are given a molar mass per mole of 32 grams. The main equation can then be changed to reflect the mass and molar mass. After calculating, we come to a conclusion.To learn more about oxygen atoms refer to:
https://brainly.com/question/28009615
#SPJ1
What is the correct reading of the temperature in the pictured thermometer? make sure to report your reading with the appropriate significant figures.O 35.90 °CO 35 °CO 35.0 °CO 35.9 °CO 36 °CO 25.9 °C
The correct reading of the temperature as shown in the pictured thermometer is 36°C.
A thermometer is basically a device which is used to measure the temperature. In a mercury thermometer, the thermometer is filled up with mercury. Mercury is a metal which is present in liquid state at room temperature. Mercury an expand and contract with the change in temperature.
When the temperature increases, the mercury in the thermometer expands and rises which we can see in the thermometer and take the reading of the temperature against the scale. In the given temperature, we can observe the reading is at the mark just after the 35°C mark on the scale and hence the temperature reading must be 36°C.
To know more about thermometer here
https://brainly.com/question/28027822
#SPJ4
which of the following statements best explains the trend in the molar solubility of in various concentrations of shown in the graph above? (a) higher concentrations of allow less to dissolve before the solution becomes saturated. (b) higher concentrations of lead to more favorable attractions between ions and ions, thus less dissolves. (c) higher concentrations of produce more through hydrolysis, causing to precipitate, thus more dissolves. (d) higher concentrations of cause the
The trend in the molar solubility of in different concentrations seen in the graph above appears to be best explained by the statement (a) "increasing concentrations of allow less to dissolve before the solution
The amount of a material present in a mixture or solution is referred to as its concentration. Different units, such as molarity (moles of solute per litre of solution), molality (moles of solute per kilogramme of solvent), or mass percentage, can be used to quantify them (mass of solute as a percentage of total mass). Concentrations play a key role in chemistry for predicting reaction behaviour and figuring out how much of a material to add to a solution. Concentrations are crucial in figuring out how various chemicals affect living things and the environment in sectors like environmental science and medicine.
Learn more about concentrations here:
https://brainly.com/question/10725862
#SPJ4
manipulating unconventional ch-based hydrogen bonding in a methyltransferase via noncanonical amino acid mutagenesis
Noncanonical amino acid mutagenesis can be used to manipulate atypical CH-based hydrogen bonding in a methyltransferase. This procedure includes inserting non-natural amino acids.
might result in changed substrate identification and catalytic efficiency, allowing manipulation of the hydrogen bonding network and the methylation process. Noncanonical amino acid mutagenesis can be utilized to investigate the significance of unusual CH-based hydrogen bonding in methyltransferase activity, perhaps leading to the identification of novel therapeutic targets.Noncanonical amino acid mutagenesis can be used to manipulate atypical CH-based hydrogen bonding in a methyltransferase. This procedure includes inserting non-natural amino acids.Noncanonical amino acid mutagenesis can be used to manipulate atypical CH-based hydrogen bonding in a methyltransferase. This procedure includes inserting non-natural amino acids.
learn more about amino acid here:
https://brainly.com/question/28409615
#SPJ4
1-chloro-2-pentene undergoes hydrolysis in warm water to give a mixture of 2-penten-1-ol and 1-penten-3-ol. draw the structure of the intermediate's resonance contributor leading to the formation of 2-penten-1-ol.
2-penten-1-ol is a primary allylic alcohol that is 2-pentene in which a hydrogen at position 1 has been replaced by a hydroxy group.
Define penten -1?
A colourless flammable liquid alkene having several straight-chained isomeric forms, used in the manufacture of organic compounds. Formula: C5H10. Also called: amylene, pentylene. Collins English Dictionary.The chemical formula for pentanol is C5H12O C 5 H 12 O , which indicates the presence of five carbons, twelve hydrogens, and one oxygen atom. The pentanol structural formula, which indicates the bonding arrangement within the molecule, is CH3(CH2)3CH2OH C H 3 ( C H 2 ) 3 C H 2 O H .1-Pentanol, (or n-pentanol, pentan-1-ol), is an alcohol with five carbon atoms and the molecular formula C5H11OH. 1-Pentanol is a colourless liquid with a distinctive aroma. It is the straight-chain form of amyl alcohol, one of 8 isomers with that formula.To learn more about penten refers to:
https://brainly.com/question/20068688
#SPJ4
which reactant in each pair of reactants below, select the one that is more nucleophilic. (a) -(ch3)3p (b) (ch3)3n. (c) cl- or (d) h2o.(e) BF3 or F-(f) I- or Cl-
Option b is the proper answer. (ch3) In each pair of reactants below, 3n is one of the reactants, and (ch3)3n is the more nucleophilic of the two. In chemistry, a nucleophile is a chemical entity that forms bonds.
letting go of two electrons. All ions and molecules containing at least one pi bond or a free pair of electrons are considered nucleophiles. Because they give up electrons, Lewis bases are nucleophiles. When two or more atoms, molecules, or ions form a chemical connection, also known as chemical bonding, the result is a chemical compound. These chemical bonds are responsible for holding the atoms of the resultant molecule together. A chemical link is an attraction between atoms. This attraction could be attributed to a variety of different behaviours.
Learn more about nucleophile here
https://brainly.com/question/28325919
#SPJ4
equipment needed to measure moles in chemistry?
The equipment needed to measure moles in chemistry would be the weighing balance.
Moles of substancesIn chemistry, the mole of a substance is the ratio of the mass of the substance and its molar mass. It is otherwise known as the number of moles in substances and can be mathematically expressed as:
Mole = mass/molar mass
Thus, in order to find the number of moles present in a substance, the mass of the substance must be known and the molar mass is calculated appropriately.
Since the molar mass of substances is determined from the sum of molar masses of atoms of elements present in the chemical formula of the substance, the molar mass is theoretical.
However, to find the mass of the substance, it has to be weighed using a suitable measuring scale, usually in the form of a weighing balance.
More on moles of substances can be found here: https://brainly.com/question/14200405
#SPJ1
choose the name-formula pair that does not correctly match. group of answer choices calcium acetate ca(ch3coo)2 aluminum phosphate alpo4 ammonium sulfide nh4s magnesium hydroxide mg(oh)2 zinc carbonate znco3 ammonium nitrate nh4no3 ferric chloride fecl3 lithium hypochlorite liclo
Ammonium sulfide nh4s is the name-formula pair that is incorrectly matched.
What does the word "formula" mean?The formula is a fact or a rule that is expressed using mathematical symbols. Normally, three or more values are connected by an equal sign. When you know the value of one quantity, you may apply the formula to determine how much the other quantity is worth.
Why is baby formula in short supply?Following that, demand fell as households decided not to make purchases and instead made do about what they already had. When a result, formula producers would have to produce less as the market changed. Delays: Supply chain bottlenecks brought on by the epidemic continue to affect the production of baby formula. With the maker Abbott, delays brought on by the weather have also happened.
To know more about formula visit:
https://brainly.com/question/29886204
#SPJ4
Give the number of d electrons for the central metal ion in the following compounds:
(a) [Cr(H2O)6](ClO3)2
(b) [Mn(CN)6]^2-
(c) [Ru(NO)(en)2Cl]Br
(d) [Ru(NH3)5Cl]SO4
(e) Na2[Os(CN)6]
(f) [Co(NH3)4CO3I]Â
(a) Chromium in the compound Cr(H2O)62 has 6d electrons.
(b) Manganese in the compound [Mn(CN)6]^2- has 5d electrons.
(c) Ruthenium in the compound [Ru(NO)(en)2Cl]Br has 8 d electrons.
(d) Ruthenium in the compound [Ru(NH3)5Cl]SO4 has 8 d electrons.
(e) Osmium in the compound Na2[Os(CN)6] has 8 d electrons.
(f) Cobalt in the compound [Co(NH3)4CO3I] has 9 d electrons.
Chromium in the compound Cr(H2O)62 has 6d electrons. Chromium is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Cr in the +3 state is [Ar] 3d3. This means that the 3d sub-shell of the Chromium atom is occupied by 3 electrons, and the remaining 3 electrons are present in the 4s sub-shell.
Manganese in the compound [Mn(CN)6]^2- has 5d electrons. Manganese is a transition metal, and it is in the +2 oxidation state in this compound. The electronic configuration of Mn in the +2 state is [Ar] 3d5. This means that the 3d sub-shell of the Manganese atom is occupied by 5 electrons, and the remaining 2 electrons are present in the 4s sub-shell.
Ruthenium in the compound [Ru(NO)(en)2Cl]Br has 8d electrons. Ruthenium is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Ru in the +3 state is [Kr] 4d8. This means that the 4d sub-shell of the Ruthenium atom is occupied by 8 electrons.
Ruthenium in the compound [Ru(NH3)5Cl]SO4 has 8 d electrons. Ruthenium is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Ru in the +3 state is [Kr] 4d8. This means that the 4d sub-shell of the Ruthenium atom is occupied by 8 electrons.
Osmium in the compound Na2[Os(CN)6] has 8 d electrons. Osmium is a transition metal, and it is in the +4 oxidation state in this compound. The electronic configuration of Os in the +4 state is [Xe] 4f14 5d8. This means that the 5d sub-shell of the Osmium atom is occupied by 8 electrons.
Cobalt in the compound [Co(NH3)4CO3I] has 9 d electrons. Cobalt is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Co in the +3 state is [Ar] 3d7 4s2. This means that the 3d sub-shell of the Cobalt atom is occupied by 7 electrons, and the remaining 2 electrons are present in the 4s sub-shell.
Learn more about transition metals here:
https://brainly.com/question/1618364
#SPJ4
All of the following are postulates of the kinetic molecular theory of gases except
A. The gas molecules are in constant motion.
B. The gas molecules are in rapid motion.
C. The collisions between molecules are elastic.
D. At a constant temperature, each molecule has the same kinetic energy.
E. The volumes of the molecules are negligible compared with the volume of the container.
All of the following are postulates of the kinetic molecular theory of gases except option D. (at a constant temperature, each molecule has the same kinetic energy).
It is not a postulate of the kinetic theory of gases because the theory states that at a constant temperature, all molecules have the same average kinetic energy as it varies for different molecules due to the fact that they have different velocities.
A qualitative and quantitative description of the characteristics of an ideal gas can be found in something called the kinetic molecular theory. It defines how the molecules move and how they interact with each other while treating the molecules that make up the gas as if they were point masses. In addition to this, it clarifies the connection that exists between the velocities, pressure, and kinetic energy of the molecules.
Want to know more about kinetic molecular theory visit the link which is given below;
https://brainly.com/question/15013597
#SPJ4
Distinguish between the differential rate law and the integrated ratelaw. Which of these is often called just the "rate law"? What is k in a rate law, and what are orders in a rate law? Explain.
Differential rate law describes the rate of reaction as a function of reactant concentrations, changing with time. Integrated rate law describes the change in reactant concentration over time and is often used to find the half-life of a reaction.
The term "rate law" is commonly used to refer to the integrated rate law. K in a rate law is the rate constant, a value specific to each reaction that determines the rate of reaction. Orders in a rate law describe the dependency of the reaction rate on the concentration of each reactant, with each reactant having its own order. The overall reaction order is the sum of the individual orders, which can be determined through experiments.
Learn more about rate law here: brainly.com/question/7694417
#SPJ4
▼
A sample of xenon gas at 25°C and 780. mmHg is cooled to give a pressure of 580. mmHg.
Express your answer to two significant figures and include the appropriate units.
Answer:
mmHg is cooled to give a pressure of 580. mmHg. Express your answer to two significant figures and include the appropriate units. Å o D Explanation:
fill in the blank. when working in the fume hood, it is important to make an effort to minimize choose___ only keep items in the hood if they are being used for choose___ do not choose___chemicals in the fume hood unless instructed to do so.
When working in the fume hood, it is important to make an effort to minimize choose clutter only keep items in the hood if they are being used for choose the current experiment do not choose store chemicals in the fume hood unless instructed to do so.
When you are not working in the hood, keep the sash closed. Maintain a safe distance between your face and the fume hood. Unless you're utilizing a walk-in fume hood, the only part of your body within the hood should be your hands. The sash serves as a barrier and provides protection while performing dangerous work.
Use at least 6 inches of space inside the fume hood behind the sash plane. As stated by industry standards such as ANSI/AIHA Z9, this is vital for safety as a good working practice. This means that no equipment in the fume hood should come into contact with the front airfoil of the work surface.
For more information on fume hood kindly visit to
https://brainly.com/question/29582094
#SPJ4
This anion rapidly undergoes an intramolecular proton transfer; which the negatively charged oxygen atom abstracts the nearby acidic proton Draw the cunro GoC showing proton transter reaction; and modify the given structure to draw the product of that proton transfer Lone pairs are not required in the product: Identify which side of the equilibrium is favored and explain vour answer O The forward direction tavored because the anion in the product is stabilized by resonance, making the product weaker base. O The reverse direction is favored because the anion in the product is stabilized by resonance, making the product stronger base O The forward direction favored because the anion in the reactant on the more electronegative atom, making the reactant weaker base. O The reverse direction is favored because the anion in the reactant on the more electronegative atom, making the reactant stronger base.
agriculture. The largest source of pollution to the Bay comes from agricultural runoff, which contributes roughly 40 percent of the nitrogen and 50 percent of the phosphorus entering the Chesapeake Bay.
Airborne nitrogen is one of the most significant polluters of the Chesapeake Bay and its tributaries. Excess nitrogen may drive the growth of algae blooms, preventing sunlight from reaching underwater grasses and creating low-oxygen "dead zones" that smother marine life. Nitrogen and phosphorus occur naturally in aquatic habitats, but human activities such as fertilizer usage, wastewater management, fossil fuel combustion, and soap and detergent discharge inject excess nutrient pollution into ecosystems quicker than ecosystems can respond. 1At Home and Around the Neighborhood: Fertilizers, yard and pet waste, and some soaps and detergents contain nitrogen and phosphorus and, if not utilized or disposed of appropriately, can contribute to nutrient contamination.
learn more about Chesapeake Bay here:
https://brainly.com/question/14295402
#SPJ4
for the following gas-phase reaction, how is the rate of disappearance of n2o related to the rate of appearance of o2? 2n2o(g) > 2n2(g) o2(g)
For the following gas-phase reaction, the rate of disappearance of N2O related to the rate of appearance of N2:
ABOUT REACTION RATEThe rate of a chemical reaction is expressed as the rate of reduction in the concentration of reactants (reactants) per unit of time or increasing the concentration of the reaction product per unit time.
Reaction Rate FactorsThere are four factors that affect the reaction rate, namely:
1. Concentration
The working principle of concentration can increase the reaction rate because the higher the concentration, the more particles collide, thus increasing the reaction rate
2. Surface Area
Surface area can affect the rate of reaction because the larger the surface area, the more particles will collide, so the greater the reaction rate
3. Temperature
The working principle of temperature can increase the rate of reaction is to increase the kinetic energy of the reacting particles.
4. Catalyst
The working principle of a catalyst to increase the reaction rate is by lowering the activation energy of the reaction.
Learn more about reaction rate at
https://brainly.com/question/12904152.
#SPJ4
Which of the following compounds are the same?
Compound 1: 1.10 g of H and 8.90 g of O.
Compound 2: 4.95 g of H and 40.05 g of O.
Compound 3: 2.10 g of H and 32.90 g of O.
Compound 4: 4.70 g of H and 60.30 g of O
A. Compounds 1 and 4
B. Compounds 2 and 3
C. Compounds 1 and 2
The compounds that are the same among the given options are as follows: compound 1 and 2 (option C).
What is a chemical compound?A chemical compound is a substance formed by the union of two or more chemical elements in a fixed ratio, the union being a chemical bond.
A chemical compound is made up of elements with given proportions. According to this question, a compound made up of hydrogen and oxygen with different proportions.
Based on the given proportions of hydrogen and oxygen in the above compounds, compound 1 and 2 are similar because they have an equal ratio of 8.09 i.e.
Compound 1: 8.90g/1.10g = 8.09Compound 2: 40.05g/4.95g = 8.09Learn more about compound at: https://brainly.com/question/12166462
#SPJ1
Which of the following best describes a polar covalent bond?
4
Electrons are shared unequally between two atoms.
Electrons are shared equally between two atoms.
O Electrons are transferred from one atom to another to generate oppositely charged ions that are attracted to one another.
O Brief fluctuations in electron density create oppositely charged regions in two atoms that then attract one another
Electrons are shared unequally between two atoms in polar covalent bond.
What is covalent bond?A covalent bond contains the mutual sharing of one/more pairs of electrons between two atoms. A covalent bond is formed when the difference in electronegativity between two atoms is too small for electrons to move to form an ion.A covalent bond is a chemical bond in which electrons are shared to form electron pairs between atoms. These pairs of electrons are known as shared pairs or bond pairs. A stable balance of attractive and repulsive forces between atoms when sharing electrons is called a covalent bond. A covalent bond involves the sharing of electrons between two or more atoms.An ionic bond is formed when two or more ions come together and are held together by a difference in charge.to learn more about covalent bond from the given link:
https://brainly.com/question/10777799
#SPJ1
Convert the temperature of scalding water 54 into degrees Fahrenheit and kelvin
The temperature of the water in degrees Fahrenheit and kelvin are:
129.2 °F327.15 KHow to convert the temperature ?To convert the temperature of scalding water, 54 degrees Celsius, into degrees Fahrenheit, you can use the following formula:
F = (°C x 9/5) + 32
So:
(54 x 9/5) + 32 = 129.2 °F
To convert the temperature of scalding water, 54 degrees Celsius, into Kelvin, you can use the following formula:
°C + 273.15 = K
So,
54 + 273.15 = 327.15 K
Find out more on temperature at https://brainly.com/question/3994464
#SPJ1