The magnetic coils of a tokamak fusion reactor are in the shape of a toroid having an inner radius of 0.700 m and an outer radius of 1.20 m. The toroid has 900 turns of large diameter wire, each of which carries a current of 13.0 kA. Find the difference in magnitudes of the magnetic fields of the toroid along the inner and outer radii. (Enter your answer in T.)

if the velocity of the car reduces from 70km/h to 50km/h then the speed of the car will be equal to the speed of the lorry...

thus the relative velocity will be 0

Answer:

17.656 m

Explanation:

Initial speed u = 20 m/s

angle of projection α = 60°

at the top of the trajectory, one fragment has a speed of zero and drops to the ground.

we should note that the top of the trajectory will coincide with halfway the horizontal range of the the projectile travel. This is because the projectile follows an upward arc up till it reaches its maximum height from the ground, before descending down by following a similar arc downwards.

To find the range of the projectile, we use the equation

R = [tex]\frac{u^{2}sin2\alpha }{g}[/tex]

where g = acceleration due to gravity = 9.81 m/s^2

Sin 2α = 2 x (sin α) x (cos α)

when α = 60°,

Sin 2α  = 2 x sin 60° x cos 60° = 2 x 0.866 x 0.5

Sin 2α  = 0.866

therefore,

R = [tex]\frac{20^{2}*0.866 }{9.81}[/tex] = 35.31 m

since the other fraction with zero velocity drops a top of trajectory, distance between the two fragments assuming level ground and zero air drag, will be 35.31/2 = 17.656 m

Answer:

Solution,

Mass=100 kg

Acceleration due to gravity(g)=24.79 m/s^2

Now,.

[tex]weight = m \times g \\ \: \: \: \: \: \: \: \: \: \: = 100 \times 24.79 \\ \: \: \: \: \: \: = 2479 \: newton[/tex]

hope this helps ..

Good luck on your assignment..

Answer:

According to Newtons 2nd law of motion ;

  The acceleration an object experiences is as a result of the net force which is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.

Explanation:

This law is simply saying ;

Force = Mass ×Acceleration

I Hope It Helps  :)

Answer:

Q = 5.9 nC (Approx)

Explanation:

Given:

Further distance = 10 cm

Electric potential(V) = 190 v

Potential difference(V1) = 140 v

Find:

Magnitude of the charge Q

Computation:

V = KQ / r

190 = KQ / r.............Eq1

V1  = KQ / (r+10)

140 = KQ / (r+10) ............Eq2

From Eq2 and Eq1

r = 28 cm = 0.28 m

So,

190 = KQ / r

190 = (9×10⁹)(Q) / 0.28

53.2 = (9×10⁹)(Q)

5.9111 = (10⁹)(Q)

Q = 5.9 nC (Approx)

Answer:

Change in momentum = 2.197 kgm/s

Explanation:

Momentum = MV

Initial momentum = MU

Final momentum = MV

Computation:

⇒ Change in momentum = MV - MU

⇒ Change in momentum = M (V - U)

⇒ Change in momentum = 0.13(-10.3 - 6.6)

⇒ Change in momentum = 0.13(16.9)

⇒ Change in momentum = 2.197 kgm/s

Answer:

B. 2nmv

Explanation:

Pressure is force over area.

P = F / A

Force is mass times acceleration.

F = ma

Acceleration is change in velocity over change in time.

a = Δv / Δt

Therefore:

F = m Δv / Δt

P = m Δv / (A Δt)

The total mass is nm.

The change in velocity is Δv = v − (-v) = 2v.

A = 1 and Δt = 1.

Plugging in:

P = (nm) (2v) / (1 × 1)

P = 2nmv

Answer:

[tex]\theta=65.18rad[/tex]

Explanation:

The angle in rotational motion is given by:

[tex]\theta=\frac{w_o+w_f}{2}t[/tex]

Recall that the angular speed is larger than regular frequency (in rpm) by a factor of [tex]2\pi[/tex], so:

[tex]\omega_f=2\pi f\\\omega_f=2\pi*250rpm\\\omega_f=1570.80 \frac{rad}{min}[/tex]

The wheel spins from rest, that means that its initial angular speed is zero([tex]\omega_o[/tex]). Finally, we have to convert the given time to minutes and replace in the first equation:

[tex]t=5s*\frac{1min}{60s}=0.083min\\\theta=\frac{\omega_f}{2}t\\\theta=\frac{1570.800\frac{rad}{min}}{2}(0.083min)\\\theta=65.18rad[/tex]

Rock can melt at a depth of about below Earth's surface  100 km

On the other hand, interface physics offers a wide variety of spectroscopic & microscopic techniques to characterize that deposition & structure creation process upon that sub-nanometer size and, therefore, to pave the way for effective manufacturing techniques.

It is the study of both the chemical processes that take place at the meeting point of two surfaces, such as solid-liquid, solid-gas, sturdy, liquid-gas, etc. Surface engineering refers to a few surface chemistry applications.

To know more about surface visit:

https://brainly.com/question/31464585

#SPJ1

Answer:

a) Jack does more work uphill

b) Numerically, we can see that Jill applied the most power downhill

Explanation:

Jack's mass = 75 kg

Jill's mass = [tex]1.5x = 75[/tex]

Jill's mass = [tex]x = \frac{75}{1.5}[/tex] = 50 kg

distance up hill = 15 m

a) work done by Jack uphill = mgh

where g = acceleration due to gravity= 9.81 m/s^2

work = 75 x 9.81 x 15 = 11036.25 J

similarly,

Jill's work uphill = 50 x 9.81 x 15 = 7357.5 J

this shows that Jack does more work climbing up the hill

b) assuming Jack's time downhill to be t,

then Jill's time = [tex]\frac{t}{3}[/tex]

we recall that power is the rate in which work id done, i.e

P = [tex]\frac{work}{time}[/tex]

For Jack, power = [tex]\frac{11036.25}{t}[/tex]

For Jill, power =  [tex]\frac{3*7357.5}{t}[/tex] =  [tex]\frac{22072.5}{t}[/tex]

Numerically, we can see that Jill applied the most power downhill

Answer:

See the answer below.

Explanation:

"Latent Heat", also called the "Heat of Vaporization", is the amount of energy necessary to change a liquid to a vapour at constant temperature and pressure.

Best Regards!

Answer:

the particle arrangement in liquid are close together with no regular arrangement

Answer:

The centripetal acceleration of the car will be 12.32 m/s² .

Explanation:

Given that

radius ,R= 57 m

Velocity , V=26.5 m/s

We know that centripetal acceleration given as follows

[tex]a_c=\dfrac{V^2}{R}[/tex]

Now by putting the values in the above equation we get

[tex]a_c=\dfrac{26.5^2}{57}=12.32\ m/s^2[/tex]

Therefore the centripetal acceleration of the car will be 12.32 m/s² .

Answer:

t = 166 years

Explanation:

In order to calculate the amount of years that electrons take to cross the complete transmission line. You first calculate the drift speed of the electrons by using the following formula:

[tex]v_d=\frac{I}{nqA}[/tex]             (1)

I: current on the wire = 1,010A

n: free charge density = 8.50*10^28 electrons/m^3

A: cross-sectional area of the transmission line = π*r^2

r: radius of the cross-sectional area = 2.00cm = 0.02m

You replace the values of the parameters in the equation (1):

[tex]v_d=\frac{1,010A}{(8.50*10^{28}electron/m^3)(1.6*10^{-19}C)(\pi (0.02m)^2)}\\\\v_d=5.9*10^{-5}\frac{m}{s}[/tex]

Next, you use the following formula:

[tex]t=\frac{x}{v_d}[/tex]                     (2)

x: length of the line transmission = 310km = 310,000m

You replace the values of vd and x in the equation (2):

[tex]t=\frac{310,000m}{5.9*10^{-5}m/s}=5.24*10^9s[/tex]

Finally, you convert the obtained t to seconds

[tex]t=5.24*10^9s*\frac{1\ year}{3.156*10^7s}=166.03\ years[/tex]

The electrons take approximately 166 years to travel trough the complete transmission line

Answer:

I’m saying kinetic gravitational and electromagnetic and I will comment on this if I got it right

Explanation:.

Answer: 56.72 ft/s

Explanation:

Ok, initially we only have potential energy, that is equal to:

U =m*g*h

where g is the gravitational acceleration, m the mass and h the height.

h = 50ft and g = 32.17 ft/s^2

when the watermelon is near the ground, all the potential energy is transformed into kinetic energy, and the kinetic energy can be written as:

K = (1/2)*m*v^2

where v is the velocity.

Then we have:

K = U

m*g*h = (m/2)*v^2

we solve it for v.

v = √(2g*h) = √(2*32.17*50) ft/s = 56.72 ft/s

Answer:

The value of the potential energy of the particle at point B is 85 joules.

Explanation:

According to the Principle of Energy Conservation, the energy cannot be created nor destroyed, only transformed. The particle at point A has kinetic and potential energy and receives a work due to an external conservative force (Work-Energy Theorem), whose sum is equal to potential energy at point B. Mathematically speaking, the expression that describes the phenomenon is:

[tex]K_{A} + U_{A} + W_{A \rightarrow B} = U_{B}[/tex]

Where:

[tex]K_{A}[/tex] - Kinetic energy at point A, measured in joules.

[tex]U_{A}[/tex] - Potential energy at point A, measured in joules.

[tex]W_{A \rightarrow B}[/tex] - Work due to conservative force from A to B, measured in joules.

[tex]U_{B}[/tex] - Potential energy at point B, measured in joules.

The initial kinetic energy of the particle is:

[tex]K_{A} = \frac{1}{2}\cdot m \cdot v^{2}[/tex]

Where:

[tex]m[/tex] - Mass, measured in kilograms.

[tex]v[/tex] - Velocity, measured in meters per second.

If [tex]m = 0.4\,kg[/tex] and [tex]v = 10\,\frac{m}{s}[/tex], then:

[tex]K_{A} = \frac{1}{2}\cdot (0.4\,kg)\cdot \left(10\,\frac{m}{s} \right)^{2}[/tex]

[tex]K_{A} = 20\,J[/tex]

Finally, the value of the potential energy at point B is:

[tex]U_{B} = 20\,J + 40\,J + 25\,J[/tex]

[tex]U_{B} = 85\,J[/tex]

The value of the potential energy of the particle at point B is 85 joules.

The potential energy of the particle at point B is 85 J.

Given to us:

Mass of the particle, [tex]m=0.40\ kg[/tex]

velocity of the particle, [tex]v= 10\ m/s[/tex]

potential energy of the particle, [tex]PE= 40\ J[/tex]

Workdone from pt. A to B, [tex]WD_{(A\rightarrow B)} = 25\ J[/tex]

Calculating the kinetic energy of the particle,

[tex]\begin{aligned}KE&= \frac{1}{2}mv^2 \\\\&=\frac{1}{2}\times0.40\times (10)^2\\\\&=20 J\\\end{aligned}[/tex]

According to the  Principle of Energy Conservation,

The energy cannot be created nor be destroyed, it can only be transformed from one form to another.Therefore,

Also,

Total Energy at point A ,

[tex]\begin{aligned}(TE)_A &= Kinetic\ Energy+ Potential\ Energy+ Internal Energy+ Workdone\\ &=KE_A+ PE_A+UE_A+ WD_{(0\rightarrow A)}\\&=20+40+0+0\\&=60\ J\end{aligned}[/tex]

Total Energy at point B,

[tex]\begin{aligned}(TE)_B &= Kinetic\ Energy+ Potential\ Energy+ Internal Energy+ Workdone\\ &=KE_B+ PE_B+UE_B+ WD_{(A\rightarrow B)}\end{aligned}[/tex]

As the total energy is conserved from point A to B and also an external work is done on the particle. we can write the above equation as,

[tex]\begin{aligned} TE_B&=KE_B+ PE_B+UE_B+ WD_{(A\rightarrow B)}\\&=(KE_B+ PE_B+UE_B)+ WD_{(A\rightarrow B)}\\&= TE_A+ WD_{(A\rightarrow B)}\\&=60+25\\&=85\ J\end{aligned}[/tex]

Therefore, the total energy for the particle at point B is 85 J but as the particle is not moving neither work is done at point B, the total energy of the particle is the potential energy of the particle.

Hence, the potential energy of the particle at point B is 85 J.

To know more visit:

https://brainly.com/question/122902

Answer:

(a) 7.67 m/s.

(b)  4.9 J

Explanation:

(a) From the law of conservation of energy,

P.E = K.E

mgh = 1/2(mv²)

therefore,

v = √(2gh)....................... Equation 1

Where v = speed of the ball before bounce, g = acceleration due to gravity, h = height from which the ball was dropped.

Given: h = 3 m, g = 9.8 m/s²

Substitute into equation 1

v = √(2×9.8×3)

v = √(58.8)

v = 7.67 m/s.

(b) Energy of the ball before the bounce = mgh = 0.5×9.8×3 = 14.7 J

Energy of the ball after the bounce = mgh' = 0.5(9.8)(2) = 9.8 J

Amount of energy converted to heat = 14.7-9.8 = 4.9 J

Answer:

V = 8.01*10^-12 V

Explanation:

In order to calculate the electric potential produced by the dipole you use the following formula:

[tex]V=k\frac{p}{r^2}[/tex]        (1)

k: Coulomb's constant = 8.98*10^9Nm^2/C^2

p: dipole moment = 5.2×10−30 C⋅m

r: distance to the dipole = 2.8*10^-9m

You replace the values of the parameters:

[tex]V=(8.98*10^9Nm^2/C^2)\frac{5.2*10^{-30}Cm}{(2.8*10^{-9}m)}\\\\V=8.01*10^{-12}V[/tex]

The electric potential of the dipole is 8.01*10^-12V

Answer:

Explanation:

Gravitational force between two objects having mass m₁ and m₂ at a distance R

F = G m₁ m₂ / R²

Force between baby and father F₁ = 6.67x10⁻¹¹ x 4.1 x 120 / .18²

= 1.01 x 10⁻⁶ N

b )

Force between baby and Jupiter

F₂ = 6.67x10⁻¹¹ x 1.9x 10²⁷ x 4.1 / ( 6.29 x 10¹¹ )²

= 1.31 x 10⁻⁶  N

c )

Ratio = 1.01 / 1.31

= .77

Answer:

   h = 2 R (1 +μ)

Explanation:

This exercise must be solved in parts, first let us know how fast you must reach the curl to stay in the

let's use the mechanical energy conservation agreement

starting point. Lower, just at the curl

       Em₀ = K = ½ m v₁²

final point. Highest point of the curl

        [tex]Em_{f}[/tex] = U = m g y

Find the height y = 2R

      Em₀ = Em_{f}

      ½ m v₁² = m g 2R

       v₁ = √ 4 gR

Any speed greater than this the body remains in the loop.

In the second part we look for the speed that must have when arriving at the part with friction, we use Newton's second law

X axis

    -fr = m a                      (1)

Y Axis  

      N - W = 0

      N = mg

the friction force has the formula

     fr = μ  N

     fr = μ m g

    we substitute 1

    - μ mg = m a

     a = - μ g

having the acceleration, we can use the kinematic relations

    v² = v₀² - 2 a x

    v₀² = v² + 2 a x

the length of this zone is x = 2R

    let's calculate

     v₀ = √ (4 gR + 2 μ g 2R)

     v₀ = √4gR( 1 + μ)

this is the speed so you must reach the area with fricticon

finally have the third part we use energy conservation

starting point. Highest on the ramp without rubbing

     Em₀ = U = m g h

final point. Just before reaching the area with rubbing

     [tex]Em_{f}[/tex] = K = ½ m v₀²

      Em₀ = Em_{f}

     mgh = ½ m 4gR(1 + μ)

       h = ½ 4R (1+ μ)

       h = 2 R (1 +μ)

Answer:

We know that the density of the ice is smaller than the density of the water (and this is why the ice floats in water).

Dw > Di

Da is the density of the water and Di is the density of the ice

Since in Bowl A we have a volume V, only of water, then the mass of the bowl A is:

Dw*V.

Now, in the bowl B we have a combination of water and ice, suppose that Vw is the volume of water and Vi is the volume of ice, and we know that:

Vw + Vi = V.

Then the mass in this second bowl is:

Dw*Vw + Di*Vi = Dw*(V - Vi) + Di*Vi = Dw*V + (Di - Dw)*Vi

and we know that Dw > Di, then the left term is a negative term, then the mass of bowl B is smaller than the mass of bowl A.

Answer:

a

  [tex]KE = 7.17 *10^{7} \ J[/tex]

b

 [tex]t = 6411.09 \ s[/tex]

Explanation:

From the question we are told that

    The radius of the flywheel is  [tex]r = 1.50 \ m[/tex]

      The mass of the flywheel is [tex]m = 430 \ kg[/tex]

          The rotational speed of the flywheel is [tex]w = 5,200 \ rev/min = 5200 * \frac{2 \pi }{60} =544.61 \ rad/sec[/tex]

      The power supplied by the motor is  [tex]P = 15.0 hp = 15 * 746 = 11190 \ W[/tex]

     Generally the moment of inertia of the flywheel is  mathematically represented as

       [tex]I = \frac{1}{2} mr^2[/tex]

substituting values

       [tex]I = \frac{1}{2} ( 430)(1.50)^2[/tex]

       [tex]I = 483.75 \ kgm^2[/tex]

The kinetic energy that is been stored is  

       [tex]KE = \frac{1}{2} * I * w^2[/tex]

substituting values

        [tex]KE = \frac{1}{2} * 483.75 * (544.61)^2[/tex]

        [tex]KE = 7.17 *10^{7} \ J[/tex]

Generally power is mathematically represented as

          [tex]P = \frac{KE}{t}[/tex]

=>      [tex]t = \frac{KE}{P}[/tex]

substituting the value

        [tex]t = \frac{7.17 *10^{7}}{11190}[/tex]

        [tex]t = 6411.09 \ s[/tex]

Answer:

[tex]d_2=3.16cm[/tex]

Explanation:

So, in order to solve this problem, we must start by building a diagram of the problem itself. (See attached picture) And together with the diagram, we must build a free body diagram, which will include the forces that are being applied on the given charged particle together with their directions.

In this case we only care about the x-direction of the force, since the y-forces cancel each other. So if we do a sum of forces on the x-direction, we get the following:

[tex]\sum{F_{x}}=0[/tex]

so:

[Tex]-F_{12}+F_{13x}+F_{14x}=0[/tex]

Since [tex]F_{13x}=F_{14x}[/tex] we can simplify the equation as:

[tex]-F_{12}+2F_{13x}=0[/tex]

we can now solve this for [tex]F_{12}[/tex] so we get:

[tex]F_{12}=2F_{13x}[/tex]

Now we can substitute with the electrostatic force formula, so we get:

[tex]k_{e}\frac{q_{1}q_{2}}{r_{12}^{2}}=2k_{e}\frac{q_{1}q_{3}}{r_{13}^{2}}cos \theta[/tex]

We can cancel [tex]k_{e}[/tex] and [tex]q_{1}[/tex]

so the simplified equation is:

[tex]\frac{q_{2}}{r_{12}^{2}}=2\frac{q_{3}}{r_{13}^{2}}cos \theta[/tex]

From the given diagram we know that:

[tex]cos \theta = \frac{d_{1}}{r_{13}}[/tex]

so when solving for [tex]r_{13}[/tex] we get:

[tex]r_{13}=\frac{d_{1}}{cos\theta}[/tex]

and if we square both sides of the equation, we get:

[tex]r_{13}^{2}=\frac{d_{1}^{2}}{cos^{2}\theta}[/tex]

and we can substitute this into our equation:

[tex]\frac{q_{2}}{r_{12}^{2}}=2\frac{q_{3}}{d_{1}^{2}}cos^{3} \theta[/tex]

so we can now solve this for [tex]r_{12}[/tex] so we get:

[tex]r_{12}=\sqrt{\frac{d_{1}^{2}q_{2}}{2q_{3}cos^{3}\theta}}[/tex]

which can be rewritten as:

[tex]r_{12}=d_{1}\sqrt{\frac{q_{2}}{2q_{3}cos^{3}\theta}}[/tex]

and now we can substitute values.

[tex]r_{12}=(3cm)\sqrt{\frac{7x10^{-19}C}{2(2x10^{-19}C)cos^{3}(20^{o})}}[/tex]

which solves to:

[tex]r_{12}=6.16cm[/tex]

now, we must find [tex]d_{2}[/tex] by using the following equation:

[tex]r_{12}=d_{1}+d_{2}[/tex]

when solving for [tex]d_{2}[/tex] we get:

[tex]d_{2}=r_{12}-d_{1}[/tex]

when substituting we get:

[tex]d_{2}=6.16cm-3cm[/tex]

so:

[tex]d_{2}=3.16cm[/tex]

Answer:

a) 8.33 x [tex]10^{-6}[/tex] Pa  or  8.22 x [tex]10^{-11}[/tex] atm

b) 1.66 x [tex]10^{-5}[/tex] Pa  or  1.63 x [tex]10^{-10}[/tex] atm

c) 2.77 x [tex]10^{-14}[/tex] kg/m^2-s

Explanation:

Intensity of light = 2500 W/m^2

area = 25 ft^2

a) average radiation pressure on a totally absorbing section of the floor[tex]Pav = \frac{I}{c}[/tex]

where I is the intensity of the light

c is the speed of light = [tex]3*10^{8} m/s[/tex]

[tex]Pav = \frac{2500}{3*10^{8} }[/tex] = 8.33 x [tex]10^{-6}[/tex] Pa

1 pa = [tex]9.87*10^{-6}[/tex]

8.33 x [tex]10^{-6}[/tex] Pa = 8.22 x [tex]10^{-11}[/tex] atm

b) average radiation for a totally radiating section of the floor

[tex]Pav = \frac{2I}{c}[/tex]

this means that the pressure for a totally radiating section is twice the average pressure of the totally absorbing section

therefore,

Pav = 2 x 8.33 x [tex]10^{-6}[/tex]  = 1.66 x [tex]10^{-5}[/tex] Pa

or

Pav in atm = 2 x 8.22 x [tex]10^{-11}[/tex] = 1.63 x [tex]10^{-10}[/tex] atm

c) average momentum per unit volume is

[tex]m = \frac{I}{c^{2} }[/tex]

[tex]m = \frac{2500}{(3*10^{8}) ^{2} }[/tex] = 2.77 x [tex]10^{-14}[/tex] kg/m^2-s

Answer:

The magnitude of the acceleration of the car when [tex]s = 50\,m[/tex] is [tex]2\,\frac{m}{s^{2}}[/tex].

Explanation:

The acceleration can be obtained by using the following differential equation:

[tex]a = v \cdot \frac{dv}{ds}[/tex]

Where [tex]a[/tex], [tex]v[/tex] and [tex]s[/tex] are the acceleration, speed and distance masured in meters per square second, meters per second and meters, respectively.

Given that [tex]v = 0.2\cdot s[/tex], its first derivative is:

[tex]\frac{dv}{ds} = 0.2[/tex]

The following expression is obtained by replacing each term:

[tex]a = 0.2\cdot 0.2\cdot s[/tex]

[tex]a = 0.04\cdot s[/tex]

The magnitude of the acceleration of the car when [tex]s = 50\,m[/tex] is:

[tex]a = 0.04\cdot (50\,m)[/tex]

[tex]a = 2\,\frac{m}{s^{2}}[/tex]

Answer:

10.15m/s

Explanation:

The change in the frequency of sound (or any other wave) when the source of the sound and the receiver or observer of the sound move towards (or away from) each other is explained by the Doppler effect which is given by the following equation:

f₁ = [(v ± v₁) / (v ± v₂)] f            ----------------------(i)

Where;

f₁ = frequency received by the observer or receiver

v = speed of sound in air

v₁ = velocity of the observer

v₂ = velocity of the source

f = original frequency of the sound

From the question, the observer is the bicyclist and the source is the car driver. Therefore;

f₁ = frequency received by the observer (bicyclist) = 357Hz

v = speed of sound in air = 330m/s

v₁ = velocity of the observer(bicyclist) = (1 / 3) v₂ = 0.33v₂

v₂ = velocity of the source (driver)

f = original frequency of the sound = 365Hz

Note: The speed of the observer is positive if he moves towards the source and negative if he moves away from the source. Also, the speed of the source is positive if it moves away from the listener and negative otherwise.

From the question, the cyclist and the driver are moving in the same direction. But then, we do not know which one is at the front. Therefore, two scenarios are possible.

i. The bicyclist is at the front. In this case, v₁ and v₂ are negative.

Substitute these values into equation (i) as follows;

357 = [(330 - 0.33v₂) / (330 - v₂)] * 365

(357 / 365) = [(330 - 0.33v₂) / (330 - v₂)]

0.98 =  [(330 - 0.33v₂) / (330 - v₂)]

0.98 (330 - v₂) =  (330 - 0.33v₂)

323.4 - 0.98v₂ = 330 - 0.33v₂

323.4 - 330 = (0.98 - 0.33)v₂

-6.6 = 0.65v₂

v₂ = -10.15

The value of v₂ is not supposed to be negative since we already plugged in the right value polarity into the equation.

iI. The bicyclist is behind. In this case, v₁ and v₂ are positive.

Substitute these values into equation (i) as follows;

357 = [(330 + 0.33v₂) / (330 + v₂)] * 365

(357 / 365) = [(330 + 0.33v₂) / (330 + v₂)]

0.98 =  [(330 + 0.33v₂) / (330 + v₂)]

0.98 (330 + v₂) =  (330 + 0.33v₂)

323.4 + 0.98v₂ = 330 + 0.33v₂

323.4 - 330 = (0.33 - 0.98)v₂

-6.6 = -0.65v₂

v₂ = 10.15

The value of v₂ is positive and that is a valid solution.

Therefore, the speed of the car is 10.15m/s

Answer : The chemical equation for the beta decay process of [tex]_{38}^{90}\textrm{Sr}[/tex] follows:

[tex]_{38}^{90}\textrm{Sr}\rightarrow _{39}^{90}\textrm{Y}+_{-1}^0\beta[/tex]

Explanation :

Beta decay : It is defined as the process in which beta particle is emitted. In this process, a neutron gets converted to a proton and an electron.

The released beta particle is also known as electron.

The beta decay reaction is:

[tex]_Z^A\textrm{X}\rightarrow _{Z+1}^A\textrm{Y}+_{-1}^0\beta[/tex]

The chemical equation for the beta decay process of [tex]_{38}^{90}\textrm{Sr}[/tex] follows:

[tex]_{38}^{90}\textrm{Sr}\rightarrow _{39}^{90}\textrm{Y}+_{-1}^0\beta[/tex]

Answer:

the blank is 39

Explanation: a p e x

Answer:

I = 7.5*10^-10 kg m/s

Explanation:

In order to calculate the impulse you first take into account the following formula:

[tex]I=m\Delta v=m(v-v_o)[/tex]       (1)

m: mass of the pollen grain = 1.0*10^-7g = 1.0*10^-10 kg

v: final speed of the pollen grain = ?

vo: initial speed of the pollen grain = 0 m/s

Next, you calculate the final speed of the pollen grain by using the information about the acceleration and time. You use the following formula:

[tex]v=v_o+a t[/tex]       (2)

a: acceleration = 2.5*10^4 m/s^2

t: time = 0.30ms = 0.30*10^-3 s

[tex]v=0m/s+(2.5*10^4m/s^2)(0.30*10^{-3}s)=7.5\frac{m}{s}[/tex]

Next, you replcae this value of v in the equation (1) and calculate the impulse:

[tex]I=m(v-v_o)=(1.0*10^{-10}kg)(7.5m/s-0m/s)=7.5*10^{-10}kg.\frac{m}{s}[/tex]

The impulse delivered to the pollen grain is 7.5*10^-10 kg m/s