Braylee's music is 1000 times louder than Jessica's music, or 90 times louder.
To solve this question, we need to calculate the loudness, L, of Jessica's music and Braylee's music in decibels (dB).
Jessica's music has an intensity level of 10⁻⁹ W/m². Using the loudness formula, L = 10log₁₀⁻⁹ = -90dB.
Braylee's music has an intensity level of 10⁻³ W/m². Using the loudness formula, L = 10log₁₀⁻³ = -30dB.
The difference in loudness between Jessica's music and Braylee's music is -90dB - (-30dB) = -60dB.
Since decibels measure a ratio of values using a logarithmic scale, the difference in loudness between Jessica's music and Braylee's music is the same as the ratio of their sound intensities, which is 10⁻³ / 10⁻⁹ = 1/1000.
Therefore, Braylee's music is 1000 times louder than Jessica's music, or 90 times louder.
Learn more about the intensity here:
https://brainly.com/question/17583145.
#SPJ12
An explorer starts their adventure. They begin at point X and bike 7 km south. Their tire pops, so they get off of their bike, and walk 7 km east, then 7 km north. Suddenly, they are back to point X. Assuming that our Earth is a perfect sphere, find all the points on its surface that meet this condition (your answer should be in the form of a mathematical expression). Your final answer should be in degrees-minutes-seconds. Hint: There are infinite number of points, and you'd be wise to start from "spe- cial" parts of the Earth.
The points on the Earth's surface that meet the given condition are located on the circle of latitude 7° 0' 0" south.
What is the latitude of the points on the Earth's surface where an explorer can start, move 7 km south, walk 7 km east, and then 7 km north to return to the starting point?To find all the points on the Earth's surface where an explorer could start at a specific point, move 7 km south, walk 7 km east, and then 7 km north to return to the starting point, we can utilize the concept of latitude and longitude.
Let's assume the starting point is at latitude Φ and longitude λ. The condition requires that after traveling 7 km south, the explorer reaches latitude Φ - 7 km, and after walking 7 km east and 7 km north, the explorer returns to the starting latitude Φ.
To simplify the problem, we can consider the explorer to be at the equator initially (Φ = 0°). When the explorer moves 7 km south, the new latitude becomes -7 km, and when they walk 7 km east and 7 km north, they return to the latitude of 0°.
So, the condition can be expressed as follows:
Latitude: Φ - 7 km = 0°
Solving this equation, we find:
Φ = 7 km
Thus, any point on the Earth's surface that lies on the circle of latitude 7 km south of the equator satisfies the condition. The longitude (λ) can be any value since it doesn't affect the north-south movement.
In terms of degrees-minutes-seconds, the answer would be:
Latitude: 7° 0' 0" S
To summarize, all the points on the Earth's surface that meet the given condition are located on the circle of latitude 7° 0' 0" south of the equator, with longitude being arbitrary.
Learn more about Earth's surface
brainly.com/question/30573187
#SPJ11
Consider the points which satisfy the equation y = x + ax +mod where a = 7.b = 10, and p 11 Enter a comma separated list of points (x,y) consisting of all points in Zsatutying the equation. (Do not try to enter the point at infinity What in the cardinality of this elliptic curve group?
The resulting points in the elliptic curve group are:(0, 10), (1, 9), (2, 5), (3, 8), (4, 3), (5, 2), (6, 3), (7, 8), (8, 5), (9, 9), (10, 10)The cardinality of this elliptic curve group is 11, which is the same as the modulus p.
The equation y = x + ax + b mod p defines an elliptic curve group. We can solve for all the points in the group by substituting the values a = 7, b = 10, and p = 11. We then solve the equation for all possible x values, and generate the corresponding y values. For x = 0, y = 10 mod 11 = 10For x = 1, y = 9 mod 11 = 9For x = 2, y = 5 mod 11 = 5For x = 3, y = 8 mod 11 = 8For x = 4, y = 3 mod 11 = 3For x = 5, y = 2 mod 11 = 2For x = 6, y = 3 mod 11 = 3For x = 7, y = 8 mod 11 = 8For x = 8, y = 5 mod 11 = 5For x = 9, y = 9 mod 11 = 9For x = 10, y = 10 mod 11 = 10
To know more about elliptic visit :-
https://brainly.com/question/29488997
#SPJ11
Consider the ellipsoid x² + 2y² + 5z² = 54.
The implicit form of the tangent plane to this ellipsoid at (-1, -2, -3) is ___
The parametric form of the line through this point that is perpendicular to that tangent plane is L(t) = ___
Consider the ellipsoid x² + 2y² + 5z² = 54.
The implicit form of the tangent plane to this ellipsoid at (-1, -2, -3) is -2x - 8y - 30z - 108 = 0
The parametric form of the line through this point that is perpendicular to that tangent plane is L(t) = (-1 - 2t, -2 - 8t, -3 - 30t).
To find the implicit form of the tangent plane to the ellipsoid at the point (-1, -2, -3), we need to find the gradient of the ellipsoid equation at that point.
Gradient CalculationTaking the partial derivatives of the ellipsoid equation with respect to x, y, and z:
∂(x² + 2y² + 5z²)/∂x = 2x
∂(x² + 2y² + 5z²)/∂y = 4y
∂(x² + 2y² + 5z²)/∂z = 10z
Evaluating the partial derivatives at the point (-1, -2, -3):
∂(x² + 2y² + 5z²)/∂x = 2(-1) = -2
∂(x² + 2y² + 5z²)/∂y = 4(-2) = -8
∂(x² + 2y² + 5z²)/∂z = 10(-3) = -30
Therefore, the gradient vector at the point (-1, -2, -3) is (-2, -8, -30).
Implicit Form of the Tangent PlaneThe equation of the tangent plane can be expressed as:
Ax + By + Cz = D
Using the point-normal form, we can substitute the values of the point (-1, -2, -3) and the normal vector (-2, -8, -30) into the equation:
-2(x - (-1)) - 8(y - (-2)) - 30(z - (-3)) = 0
-2(x + 1) - 8(y + 2) - 30(z + 3) = 0
-2x - 2 - 8y - 16 - 30z - 90 = 0
-2x - 8y - 30z - 108 = 0
Therefore, the implicit form of the tangent plane to the ellipsoid at (-1, -2, -3) is -2x - 8y - 30z - 108 = 0.
Parametric Form of the Line Perpendicular to the Tangent PlaneSince the gradient vector (-2, -8, -30) is normal to the tangent plane, it also serves as the direction vector for the line perpendicular to the tangent plane.
The parametric form of a line passing through the point (-1, -2, -3) and with the direction vector (-2, -8, -30) can be represented as:
L(t) = (-1, -2, -3) + t(-2, -8, -30)
L(t) = (-1 - 2t, -2 - 8t, -3 - 30t)
Therefore, the parametric form of the line passing through (-1, -2, -3) and perpendicular to the tangent plane is L(t) = (-1 - 2t, -2 - 8t, -3 - 30t).
Learn more about ellipsoid here:
https://brainly.com/question/32356250
#SPJ11
|fF(x) = f¹5 (t² + sin t)dt, what is an alternative expression for F(x)? 01- COS X + C 3 O 0 21 - sin a + C 3 01. + cos x + C 3 O 2 T COS X + C 2 - |fF(x) = f¹5 (t² + sin t)dt, what is an alternative expression for F(x)? 01- COS X + C 3 O 0 21 - sin a + C 3 01. + cos x + C 3 O 2 T COS X + C 2 -
The alternative expression for F(x) in the integral |F(x) = ∫(t² + sin t)dt can be written as F(x) = 1/3t³ - cos(t) + C, where C represents the constant of integration.
To explain the solution, we start by integrating each term separately. The integral of t² with respect to t is (1/3)t³, and the integral of sin(t) with respect to t is -cos(t) (using the standard integral formulas).
Next, we add the two integrals together to get the expression 1/3t³ - cos(t). Finally, we include the constant of integration C, which represents the arbitrary constant that arises when we integrate indefinite integrals. This constant accounts for the possibility of different functions differing by a constant value.
Therefore, an alternative expression for F(x) is F(x) = 1/3t³ - cos(t) + C, where C is the constant of integration.
To learn more about integrals click here, brainly.com/question/31059545
#SPJ11
Answer each question: 1. [4 pts] Let U = {a,b, c, d, e, f}, A = {a,b,c,d}, and B = {b, e, d}. Find (AUB)'.(An B)'. A'U B', and A' B'. Show your steps. 2. [2 pts] State both of DeMorgan's Laws for Sets. Are the results of item 1 consistent with DeMorgan's Laws for Sets? Explain. 3. [2 pts] State both of DeMorgan's Laws for Logic. Explain, in your own words, how these laws correspond to DeMorgan's Laws for Sets.
To find (AUB)', (AnB)', A'UB', and A'B', we apply set operations and complementation to sets A and B. DeMorgan's Laws for Sets state that the complement of the union is the intersection of complements.
The set operations involved in finding (AUB)', (AnB)', A'UB', and A'B' can be carried out as follows:
(AUB)': Take the complement of the union of sets A and B.
(AnB)': Take the complement of the intersection of sets A and B.
A'UB': Take the complement of set A and then take the union with set B.
A'B': Take the complement of set A and then find the intersection with set B.
DeMorgan's Laws for Sets state that (AUB)' = A' ∩ B' and (AnB)' = A' ∪ B'. To determine if the results from item 1 are consistent with these laws, we need to compare the obtained sets with the results predicted by the laws. If the obtained sets match the predicted results, then they are consistent with DeMorgan's Laws for Sets.
DeMorgan's Laws for Logic state that the complement of the disjunction (logical OR) of two propositions is equal to the conjunction (logical AND) of their complements, and the complement of the conjunction of two propositions is equal to the disjunction of their complements. These laws correspond to DeMorgan's Laws for Sets because the union operation in sets can be seen as analogous to the logical OR operation, and the intersection operation in sets can be seen as analogous to the logical AND operation. The complement of a set corresponds to the negation of a proposition. Therefore, the laws for sets and logic share similar principles of complementation and operations.
To learn more about DeMorgan's Laws click here :
brainly.com/question/31985393
#SPJ11
1 Evaluate the integral. (Remember to use absolute values where appropriate. Use C for the constant of Integration.) 5x3+ 50x2+ 133x-2 dx (x²+ 10x +26)² 2 Make a substitution to express the integrand as a rational function and then evaluate the integral. (Use C for the constant of integration.) 3 Make a substitution to express the integrand as a rational function and then evaluate the Integral. √x Lyx dx 4 Make a substitution to express the integrand as a rational function and then evaluate the integral. (Use C for the constant of integration.) 3c2x dx e²x + 13px + 40
To evaluate the integral ∫ (5x^3 + 50x^2 + 133x - 2) / (x^2 + 10x + 26)^2 dx, we can use a combination of algebraic manipulation and the method of partial fractions.
First, we need to factor the denominator: x^2 + 10x + 26 = (x + 5)^2 + 1. The denominator can be rewritten as (x + 5)^2 + 1^2. Next, we perform the partial fractions decomposition by assuming the integral can be written as ∫ A/(x + 5) + B/(x + 5)^2 + C/(x^2 + 10x + 26) dx, where A, B, and C are constants. By finding a common denominator, equating the numerators, and solving for the constants, we can express the original integral as a sum of simpler integrals. Finally, we integrate each term separately and sum up the results to obtain the final answer.
To evaluate the integral after making a substitution, we need to choose an appropriate substitution that simplifies the integrand. For example, we could let u = √x, which implies x = u^2. Then, dx = 2u du. Substituting these into the integral, we get ∫ u(u^2) du. Now, the integrand is a rational function that can be easily integrated. After performing the integration, we can substitute back u = √x to obtain the final result.
To evaluate the integral after making a substitution, we need to choose an appropriate substitution that simplifies the integrand. Let's say we make the substitution u = 2x + 13p. This implies du = 2dx, which can be rewritten as dx = du/2. Substituting these into the integral, we get ∫ (3c^2)(u/2) (e^2u + 13pu + 40) du. Now, the integrand is a rational function that can be integrated by expanding and simplifying. After performing the integration, we obtain the result in terms of u. Finally, we substitute u = 2x + 13p back into the expression to obtain the final result in terms of x and p. Note: The second and third parts of the question seem to be incomplete or contain errors. It would be helpful to provide the complete expressions for the integrals to ensure accurate evaluation and explanation.
To learn more about method of partial fractions click here:
brainly.com/question/31400292
#SPJ11
Find an antiderivative F(x) of the function f(x) = − 4x² + x − 2 such that F(1) = a.
F(x) = (Hint: Write the constant term on the end of the antiderivative as C, and then set F(1) = 0 and solve for C.)
F(x) = - 4x² + x - 2 such that Now, find a different antiderivative G(x) of the function f(x): G(1) = − 15.
G(x) =
To find an antiderivative F(x) of the function f(x) = -4x² + x - 2 such that F(1) = a, we need to integrate each term individually. The antiderivative of -4x² is -(4/3)x³, the antiderivative of x is (1/2)x², and the antiderivative of -2 is -2x.
Adding these antiderivatives together, we get:
F(x) = -(4/3)x³ + (1/2)x² - 2x + C,
where C is the constant of integration.
Now, we set F(1) = a:
F(1) = -(4/3)(1)³ + (1/2)(1)² - 2(1) + C = a.
Simplifying the equation, we have:
-(4/3) + (1/2) - 2 + C = a,
(-4/3) + (1/2) - 2 + C = a,
-8/6 + 3/6 - 12/6 + C = a,
-17/6 + C = a. Therefore, the constant C is equal to a + 17/6, and the antiderivative F(x) becomes:
F(x) = -(4/3)x³ + (1/2)x² - 2x + (a + 17/6).
This expression represents an antiderivative of the function f(x) = -4x² + x - 2 such that F(1) = a. Now, let's find a different antiderivative G(x) of the function f(x) = -4x² + x - 2 such that G(1) = -15. Using the same process as before, we integrate each term individually: The antiderivative of -4x² is -(4/3)x³, the antiderivative of x is (1/2)x², and the antiderivative of -2 is -2x. Adding these antiderivatives together and setting G(1) = -15, we have:
G(x) = -(4/3)x³ + (1/2)x² - 2x + D, where D is the constant of integration.
Setting G(1) = -15:
G(1) = -(4/3)(1)³ + (1/2)(1)² - 2(1) + D = -15.
Simplifying the equation, we get:
-(4/3) + (1/2) - 2 + D = -15,
-8/6 + 3/6 - 12/6 + D = -15,
-17/6 + D = -15,
D = -15 + 17/6,
D = -90/6 + 17/6,
D = -73/6.
Therefore, the constant D is equal to -73/6, and the antiderivative G(x) becomes: G(x) = -(4/3)x³ + (1/2)x² - 2x - 73/6.
Learn more about antiderivative here: brainly.com/question/14468619
#SPJ11
Find the equation of the tangent line to the graph of the relation 3e-r=0 at the point (3,0).
To find the equation of the tangent line to the graph of the relation 3e^(-r) = 0 at the point (3,0), we need to find the derivative of the relation with respect to r. The equation of the tangent line can then be determined using the derivative and the given point.
The given relation is 3e^(-r) = 0. To find the equation of the tangent line at the point (3,0), we need to find the derivative of the relation with respect to r. The
derivative
gives us the slope of the tangent line at any point on the curve.
Taking the derivative of the
relation
3e^(-r) = 0 with respect to r, we use the chain rule:
d/dx [3e^(-r)] = d/dx [3] * d/dx [e^(-r)] = 0 * d/dx [e^(-r)] = 0.
Since the derivative is zero, it means that the slope of the tangent line is zero. This implies that the tangent line is a horizontal line.
Now, we have the point (3,0) on the tangent line. To determine the equation of the tangent line, we can write it in the form y = mx + b, where m represents the slope and b represents the y-intercept.
Since the slope of the tangent line is zero, we have m = 0. Therefore, the equation becomes y = 0x + b, which simplifies to y = b.
Now, we substitute the coordinates of the given point (3,0) into the equation to find the value of b. We have 0 = b. This means that the y-intercept is zero.
Putting it all together, the equation of the
tangent line
to the graph of the relation 3e^(-r) = 0 at the point (3,0) is y = 0.
To learn more about
tangent line
brainly.com/question/23416900
#SPJ11
Regenerate response
The task: For the given Boolean function
1) Find its DNF ( Disjunctive Normal Form ).
2) Find its dual function ( using 2 methods: the definition & the theorem )
Q) f(x, y, z) = x → (Z V y)
The given Boolean function is f(x, y, z) = x → (z ∨ y). To find its DNF (Disjunctive Normal Form), we express the function as a disjunction of conjunctions of literals.
The dual function is obtained by interchanging logical AND and OR operations. We can find the dual function using both the definition and the duality theorem.
1) To find the DNF, we first observe that the function f(x, y, z) is already in the form of an implication. We can rewrite it as f(x, y, z) = ¬x ∨ (z ∨ y). Now, we can express this function as a disjunction of conjunctions of literals: f(x, y, z) = (¬x ∧ z ∧ y) ∨ (¬x ∧ z ∧ ¬y).
2) To find the dual function, we can use two methods:
- Using the definition: The dual function of f(x, y, z) is obtained by interchanging logical AND (∧) and OR (∨) operations. Therefore, the dual function is g(x, y, z) = x ∧ (¬z ∧ ¬y).
- Using the duality theorem: The duality theorem states that the dual function is obtained by complementing the variables and interchanging logical AND and OR operations. In this case, the dual function is g(x, y, z) = ¬f(¬x, ¬y, ¬z) = ¬(¬x → (¬z ∨ ¬y)). Simplifying further, we get g(x, y, z) = x ∧ (¬z ∧ ¬y).
By applying either method, we obtain the dual function g(x, y, z) = x ∧ (¬z ∧ ¬y) for the given Boolean function f(x, y, z) = x → (z ∨ y).
To learn more about Boolean function click here: brainly.com/question/27885599
#SPJ11
Find the volume V of the solid obtained by rotating the region bounded by the given curves about the specified line. y = 7 - x², y = 3; about the x-axis V = ..........
Sketch the region.
The volume V of the solid obtained by rotating the region bounded by the curves y = 7 - x², y = 3, about the x-axis is V = 568π/15. The sketch of the region is a parabolic shape below the line y = 7 - x² and above the line y = 3, bounded by the x-values -3 and 3
To find the volume, we can use the method of cylindrical shells. The region bounded by the given curves is a parabolic region below the line y = 7 - x² and above the line y = 3. When this region is rotated about the x-axis, it forms a solid with a cylindrical shape.
To calculate the volume, we integrate the area of each cylindrical shell. The radius of each shell is the distance from the x-axis to the curve y = 7 - x², which is (7 - x²). The height of each shell is the difference between the upper and lower curves, which is (7 - x²) - 3 = 4 - x².
The integral for the volume is given by V = ∫[a,b] 2π(7 - x²)(4 - x²) dx, where [a, b] is the interval of x-values where the curves intersect.
Simplifying the integral and evaluating it over the interval [-3, 3], we find V = 568π/15.
The sketch of the region is a parabolic shape below the line y = 7 - x² and above the line y = 3, bounded by the x-values -3 and 3. The rotation of this region about the x-axis forms a solid with a cylindrical shape.
To learn more about volume click here: brainly.com/question/13338592
#SPJ11
.3. We want to graph the function f(x) = log4 x. In a table below, find at three points with nice integer y-values (no rounding!) and then graph the function at right. Be sure to clearly indicate any asymptotes. (4 points) . In words, interpret the inequality |x-81 > 7 the same way I did in the videos. Note: the words "absolute value" should not appear in your answer! (2 points) Solve the inequality and give your answer in interval notation. Be sure to show all your work, and write neatly so your work is easy to follow. (4 points) 2|3x + 1-2 ≥ 18
1)
Tablex (x,y) (y= log4x)-1 0.5-2 0.6667-3 0.7924-4 1x y1 -12 0.5-23 0.6667-34 0.7924-4.5 12)
Graph: For graphing the function f(x)=log4x, consider the following steps.
1. Draw a graph with the x and y-axes and a scale of at least -6 to 6 on each axis.
2. Because there are no restrictions on x and y for the logarithmic function, the graph should be in the first quadrant.
3. For the points chosen in the table, plot the ordered pairs (x, y) on the graph.
4. Draw the curve of the graph, ensuring that it passes through each point.
5. Determine any asymptotes.
In this case, the x-axis is the horizontal asymptote.
We constructed the graph of the function f(x) = log4 x by following the above-mentioned steps.
In words, the inequality |x-81 > 7 should be interpreted as follows:
The difference between x and 81 is greater than 7, or in other words, x is more than 7 units away from 81.
Here, the vertical lines around x-81 indicate the absolute value of the difference between x and 81, but the word "absolute value" should not be used in the interpretation.
Solution: 2|3x + 1-2 ≥ 18|3x + 1-2| ≥ 9|3x - 1| ≥ 9
Using the properties of absolute values, we can solve for two inequalities, one positive and one negative:
3x - 1 ≥ 93x ≥ 10x ≥ 10/3
and, 3x - 1 ≤ -93x ≤ -8x ≤ -8/3
or, in interval notation:
$$\left(-\infty,-\frac{8}{3}\right]\cup\left[\frac{10}{3},\infty\right)$$
To know more about inequalities visit:
brainly.com/question/30239204
#SPJ11
.8. A ballon is in the form of right circular cylinder of radius 1.5 m and length 4m and is surrounded by hemispherical ends. If the radius is increased by 0.01 m and length by 0.05m, find the percentage chant the volume of ballon.
To calculate the percentage change in the volume of a balloon, we consider the initial and final dimensions of the balloon.
By comparing the volumes before and after the changes in radius and length, we can determine the percentage change in volume.
The initial balloon is in the form of a right circular cylinder with hemispherical ends. Its radius is 1.5 m, and its length is 4 m. The volume of this balloon can be calculated as the sum of the volumes of the cylinder and two hemispheres.
V_initial = V_cylinder + 2 * V_hemisphere = π * (1.5^2) * 4 + 2/3 * π * (1.5^3) = 18π + 9π = 27π
After increasing the radius by 0.01 m and the length by 0.05 m, the new dimensions are a radius of 1.51 m and a length of 4.05 m.
V_final = V_cylinder + 2 * V_hemisphere = π * (1.51^2) * 4.05 + 2/3 * π * (1.51^3) = 19.2609π + 9.6426π = 28.9035π
The percentage change in volume can be calculated as:
Percentage Change = [(V_final - V_initial) / V_initial] * 100
= [(28.9035π - 27π) / 27π] * 100
≈ 6.48%
Therefore, the volume of the balloon increases by approximately 6.48% after the changes in radius and length.
To learn more about percentage change click here: brainly.com/question/14801224
#SPJ11
Prove the equation using the mathematical induction that it is true for all positive integers. 4+9+14+19+...+(5n-1)=n/2 (5n+3)
The equation [tex]4 + 9 + 14 + 19 +... + (5n - 1) = n/2 (5n + 3)[/tex] is proved using the mathematical induction that it is true for all positive integers.
Here are the steps to prove the equation:
Step 1: Show that the equation is true for n = 1.
Substitute n = 1 into the equation we have.
[tex]4 + 9 + 14 + 19 +... + (5(1) - 1) = 1/2 (5(1) + 3)4 + 9 + 14 + 19 = 16[/tex]
Yes, the left-hand side of the equation equals the right-hand side, and so the equation is true for n = 1.
Step 2: Assume the equation is true for n = k.
Now, let's assume that the equation is true for n = k. In other words, we will assume that:
[tex]4 + 9 + 14 + 19 + ... + (5k - 1) = k/2 (5k + 3)[/tex].
Step 3: Show that the equation is true for [tex]n = k + 1[/tex].
Now, we want to show that the equation is also true for [tex]n = k + 1[/tex]. This is done as follows:
[tex]4 + 9 + 14 + 19 +... + (5k - 1) + (5(k+1) - 1) = (k + 1)/2 (5(k+1) + 3)[/tex]
We need to simplify the left-hand side of the equation.
[tex]4 + 9 + 14 + 19 + ... + (5k -1) + (5(k+1) - 1) = k/2 (5k + 3) + (5(k+1) - 1)[/tex]
Use the assumption, [tex]k/2 (5k + 3)[/tex] and substitute it into the equation above to give:
[tex]k/2 (5k + 3) + 5(k + 1) - 1 = (k + 1)/2 (5(k + 1) + 3)[/tex]
Simplifying both sides:
[tex]k/2 (5k + 3) + 5k + 4 = (k + 1)/2 (5k + 8) + 3/2[/tex]
Notice that both sides of the equation are equal.
Therefore, the equation is true for [tex]n = k + 1[/tex].
Step 4: Therefore, the equation is true for all positive integers, by induction.
Since the equation is true for n = 1, and if we assume that it is true for [tex]n = k[/tex], then it must also be true for [tex]n = k + 1[/tex], then it is true for all positive integers by induction.
To know more about mathematical induction , visit:
https://brainly.com/question/29503103
#SPJ11
suppose two statistics are both unbiased estimators of the population parameter in question. you then choose the sample statistic that has the _________ standard deviation.
suppose two statistics are both unbiased estimators of the population parameter in question. you then choose the sample statistic that has the smaller standard deviation.
When choosing between two unbiased estimators, it is generally preferable to select the one with a smaller standard deviation. The standard deviation measures the variability or dispersion of the estimator's sampling distribution.
A smaller standard deviation indicates that the estimator's values are more tightly clustered around the true population parameter.
By selecting the estimator with a smaller standard deviation, you are more likely to obtain estimates that are closer to the true population parameter on average. This reduces the potential for large errors or outliers in your estimates.
Therefore, when both estimators are unbiased, choosing the one with the smaller standard deviation improves the precision and reliability of your estimates.
To know more about unbiased estimator, refer here:
https://brainly.com/question/32063886#
#SPJ11
Calculate the line integral of the vector-function F(x, y, z) = (y² + z²) i − yzj + xk along the path L: x=t, y = 2 cost, z = 2 sint (OSIS t≤ Present your answer in the exact form
The line integral of the vector function F(x,y,z)= (y²+z²)i-yzj+xk along the path L: x=t, y= 2 cos(t), z=2sin(t), where 0≤t≤π can be calculated by first parameterizing the path L. Here, we use x=t as the parameter for L.
Using the vector function, we can express the path L as follows:r(t)= ti + 2 cos(t)j + 2 sin(t)k
The vector-valued function F(x,y,z) can be written as follows:F(x,y,z) = (y²+z²)i-yzj+xk
Using the values of y and z in L, we get:F(x,y,z) = (4cos²(t) + 4sin²(t))i-2cos(t)sin(t)j + ti
Summary The line integral of the vector-function F(x, y, z) = (y² + z²) i − yz j + x k along the path L: x=t, y = 2 cost, z = 2 sint (0 ≤ t ≤ π) can be calculated by parameterizing the path L, calculating the vector function F(x, y, z) for the given path L, and then using the formula ∫L F(r)·dr = ∫L F(r(t))·r'(t) dt.
Learn more about integral click here:
https://brainly.com/question/30094386
#SPJ11
1. A regression equation is given by Y= 20+0.75x
where y is the fitted value (not observed data). what is the value of the residual for the (observed) data point x= 100 and y= 90?
2. data obtained from a number of women clothing stores show that there is a (linear relationship) between sales (y,in dollars) and advertising budget (x, in dollars). The regression equation was found to be y= 5000 + 7.50x . where y is the predicted sales value (in dollars) and advertising budget of 2 women. clothing stores differ by $30,000, what will be the predicted difference in their sales?
4. A regression analysis between sales (y, in $1000) and price (x, in dollars )resulted in the following equation.
y= 50,000 -Bx. where Y is the fitted sales (in $1000). The above equation implies that an increase of ___$?____ in price is associated with a decrease of ___$?____ in sales. (fill the blanks in dollars)
5. suppose the correlation coefficient between height (measured in feet) and weight (measured in pounds) is 0.40. what is the correlation coefficient between height measured in inches and weight measured in ounces? ( one foot = 12 inches, one pound= 16 ounces)
The value of the residual for the observed data points: [tex]x = 100[/tex] and [tex]y = 90[/tex] is -5.
1. The regression equation is given by [tex]Y = 20 + 0.75x[/tex]
It can be calculated using the following formula:
Residual = Observed value - Predicted value
Substituting the given values in the formula, we get,
Residual [tex]= 90 - (20 + 0.75(100))[/tex]
Residual[tex]= -5[/tex]
Therefore, the value of the residual for the observed data points x = 100 and [tex]y = 90 is -5.[/tex]
Therefore, the value of the residual for the observed data points x = 100 and [tex]y = 90 is -5.[/tex]
Know more about data points here:
https://brainly.com/question/3514929
#SPJ11
please solve number 18
18. Find the average rate of change of f(x) = x² + 3x +/ from 1 to x. Use this result to find the slope of the seca line containing (1, f(1)) and (2, ƒ(2)). 19. In parts (a) to (f) use the following
Given f(x) = x² + 3x +/.
To find the average rate of change of f(x) = x² + 3x +/ from 1 to x, we have to use the formula of average rate of change of function as given below: Average rate of change of f(x) from x=a to x=b is given by:
Step by step answer:
We have been given[tex]f(x) = x² + 3x +/[/tex] To find the average rate of change of f(x) from 1 to x, we substitute a = 1 and b = x in the formula of the average rate of change of the function given below: Average rate of change of f(x) from
x=a to
x=b is given by:
Now we substitute the values of a and b in the above formula as below: Therefore, the average rate of change of f(x) from 1 to x is 2x + 3.
To find the slope of the secant line containing (1, f(1)) and (2, ƒ(2)), we substitute x = 2
and x = 1 in the above formula and find the corresponding values.
Now we substitute the value of x = 1
and x = 2 in the formula of the average rate of change of the function, we get Slope of the secant line containing [tex](1, f(1)) and (2, ƒ(2)) is 7[/tex].
To know more about function visit :
https://brainly.com/question/30721594
#SPJ11
help, how do i solve for x? i don’t get it
The radius of right cylinder is,
⇒ r = 11 m
We have to given that,
Volume of right cylinder = 4561 m³
Height of right cylinder = 12 m
Since, We know that,
Volume of right cylinder is,
⇒ V = πr²h
Substitute all the values, we get;
⇒ 4561 = 3.14 × r² × 12
⇒ 121.04 = r²
⇒ r = √121.04
⇒ r = 11 m
Thus, The radius of right cylinder is,
⇒ r = 11 m
To learn more about cylinder visit:
https://brainly.com/question/27803865
#SPJ1
The volume, L litres, of emulsion paint in a plastic tub may be assumed to be normally distributed with mean 10.25 and variance ². (a) Assuming that a² = 0.04, determine P(L<10). (4 marks) (b) Find the value of a so that 98% of tubs contain more than 10 litres of emulsion paint. (4 marks)
In this problem, the volume of emulsion paint in a plastic tub is assumed to be normally distributed with a mean of 10.25 and a variance of 0.04.
(a) To determine P(L<10), we need to calculate the cumulative probability up to the value of 10 using the normal distribution. The z-score can be calculated as (10 - 10.25) / √0.04. By looking up the corresponding z-value in the standard normal distribution table, we can find the probability.
(b) To find the value of 'a' such that 98% of tubs contain more than 10 litres of emulsion paint, we need to find the z-score that corresponds to the 98th percentile. By looking up this z-value in the standard normal distribution table, we can calculate 'a' using the formula a = (10 - 10.25) / z.
To know more about normal distribution here: brainly.com/question/15103234
#SPJ11
(a) From a random sample of 200 families who have TV sets in Şile, 114 are watching Gülümse Kaderine TV series. Find the 96 confidence interval for the fractin of families who watch Gülümse Kaderine in Şile.
(b) What can we understand with 96% confidence about the possible size of our
error if we estimate the fraction families who watch Gülümse Kaderine to be 0.57 in Şile?
a) the 96% confidence interval for the fraction of families who watch Gülümse Kaderine in Şile is (0.496, 0.644).
b) estimating the proportion of families watching the TV series to be 0.57 in Şile could be as large as ±0.074.
(a)From a random sample of 200 families who have TV sets in Şile, 114 are watching Gülümse Kaderine TV series.
Find the 96% confidence interval for the fraction of families who watch Gülümse Kaderine in Şile.
The sample size is n = 200, and the number of families who watched the TV series is x = 114. So, the point estimate of the proportion of families watching the TV series is:p = x/n = 114/200 = 0.57T
he standard error of the proportion is:SE = sqrt[p(1-p)/n] = sqrt[0.57(1-0.57)/200] ≈ 0.042
The margin of error at 96% confidence is given by:ME = z*SE, where z is the 96% confidence level critical value from the standard normal distribution.
Using a table or calculator, we can find that z ≈ 1.75.So, the margin of error is:
ME = 1.75(0.042) ≈ 0.074
The confidence interval for the proportion of families watching the TV series is:p ± ME = 0.57 ± 0.074 = (0.496, 0.644)
Therefore, the 96% confidence interval for the fraction of families who watch Gülümse Kaderine in Şile is (0.496, 0.644).
(b)If we estimate the fraction of families who watch Gülümse Kaderine to be 0.57 in Şile, the possible size of our error can be understood with 96% confidence using the margin of error.
From part (a), we know that the margin of error for a 96% confidence level when estimating the proportion of families watching the TV series as 0.57 is 0.074.
Therefore, we can say with 96% confidence that our error in estimating the proportion of families watching the TV series to be 0.57 in Şile could be as large as ±0.074.
Learn more about confidence intervals at:
https://brainly.com/question/32278466
#SPJ11
Q4: We select a random sample of 39 observations from a population with mean 81 and standard deviation 5.5, the probability that the sample mean is more 82 is A) 0.8413 B) 0.1587
C) 0.8143 D) 0.1281 Q5: If the mean, E(X), of the following probability distribution is 1.5, then the values of a and b, respectively, are: A) a= 0.30, b = 0.50
B) a = 0.55, b = 0.35
D) a = 0.50, b = 0.30
C) a= 0.35, b = 0.55 x 0 2 4
P(X=x) a b 0.1
Q4. We select a random sample of 39 observations from a population with mean 81 and standard deviation 5.5, the probability that the sample mean is more 82 is 0.0314.
So, the answer is E
Q5. the values of a and b, respectively, are:C) a= 0.35, b = 0.55 x.
So, the answer is C.
Q4:To solve this problem, we will use the central limit theorem, which tells us that if n is large enough, then the sampling distribution of the sample mean is approximately normal with mean = μ and standard deviation = σ/√n.
Sample size = n = 39
Mean of the population = μ = 81
Standard deviation of the population = σ = 5.5
We need to calculate the probability of the sample mean, which is more than 82.
The formula for Z-score:
z = (x - μ) / (σ / √n)
Here, x = 82μ = 81σ = 5.5n = 39z = (82 - 81) / (5.5 / √39) = 1.854
The corresponding probability from Z-table is P(Z > 1.854) = 0.0314.
The probability that the sample mean is more than 82 is 0.0314 (approximately).
Option D) 0.1281 is incorrect because it is the probability that the sample mean is less than 82, which is (1 - 0.0314) = 0.9686.Option A) 0.8413 is the probability of the Z-score being less than 1.0.Option C) 0.8143 is an incorrect value and has no correlation with the problem. Option B) 0.1587 is incorrect because it is the probability of the Z-score being more than 1.0, which is not the correct Z-score for this problem.Thus, the correct option is (E) 0.0314
.Q5: To solve this problem, we need to use the formula for the mean of the probability distribution.
E(X) = Σ [ xi P(X = xi) ]
Here, X can take the values 0, 2, and 4.
Probabilities are given as 0.1, a, and b, respectively.
E(X) = 0(0.1) + 2(a) + 4(b) = 1.5
Solving the above equation, we get:0.2a + 0.4b = 0.75 ......(1)
Also, probabilities must add up to 1.
Therefore,0.1 + a + b = 1
Simplifying, we get:a + b = 0.9 ..........(2)
Solving (1) and (2) simultaneously, we get:
a = 0.35, b = 0.55
Therefore, the values of a and b, respectively, are a = 0.35 and b = 0.55.
Option C) a = 0.35 and b = 0.55 is the correct answer. Option A) a = 0.30 and b = 0.50 is incorrect. Option B) a = 0.55 and b = 0.35 is incorrect. Option D) a = 0.50 and b = 0.30 is incorrect.Hence, the answer of question 5 is C.
Learn more about probability at;
https://brainly.com/question/32657133
#SPJ11
A solid S is bounded by the surfaces x = x², y = x and z = 2. Find the mass of the solid if its density is given by p(z) = z³. A parabola has the following equation: y² = Ax x>0, A>0 The parabola is rotated about O onto a new parabola with equations 16x²-24xy +9y²+30x + 40y = 0 Use algebra to determine the value of A
1. The mass of the solid S can be found by evaluating the triple integral of the density function p(z) = z³ over the region bounded by the surfaces x = x², y = x, and z = 2.
2. To determine the value of A in the equation of the rotated parabola, we can equate the coefficients of the original and rotated parabola equations and solve for A.
1. To find the mass of the solid S, we need to evaluate the triple integral of the density function p(z) = z³ over the region bounded by the surfaces x = x², y = x, and z = 2. Since the given surfaces are all functions of x, we can express the region in terms of x as follows: x ∈ [0, 1], y ∈ [0, x], and z ∈ [0, 2]. The mass is then given by the triple integral:
M = ∭ p(z) dV = ∭ z³ dx dy dz
Integrating with respect to x, y, and z over their respective ranges will give us the mass of the solid S.
2. The equation of the rotated parabola can be rewritten as:
16x² - 24xy + 9y² + 30x + 40y = 0
Comparing this equation to the general equation of a parabola y² = Ax, we can equate the corresponding coefficients.
16x² - 24xy + 9y² + 30x + 40y = y²/A
Matching the coefficients of the corresponding powers of x and y on both sides, we get:
16 = 0 (coefficient of x² on the right side)
-24 = 0 (coefficient of xy on the right side)
9 = 1/A (coefficient of y² on the right side)
30 = 0 (coefficient of x on the right side)
40 = 0 (coefficient of y on the right side)
From the equation 9 = 1/A, we can solve for A:9A = 1
A = 1/9Therefore, the value of A in the equation of the rotated parabola is 1/9.
To learn more about Integral click here
brainly.com/question/31059545
#SPJ11
7.15
NW
Latex allergy in health care workers. Health care work- ers who use latex gloves with glove powder may develop a latex allergy. Symptoms of a latex allergy include con- junctivitis, hand eczema, nasal congestion, a skin rash, and shortness of breath. Each in a sample of 46 hospital em- ployees who were diagnosed with latex allergy reported on their exposure to latex gloves (Current Allergy & Clinical Immunology, Mar. 2004). Summary statistics for the number of latex gloves used per week are x 19.3 and S = 11.9.
a. Give a point estimate for the average number of latex gloves used per week by all health care workers with a latex allergy.
b. Form a 95% confidence interval for the average number of latex gloves used per week by all health care workers with a latex allergy.
c. Give a practical interpretation of the interval you found in part b.
d. Give the conditions required for the interval in part b to be valid.
The average number of latex gloves used per week by all healthcare workers with a latex allergy is estimated to be 19.3 gloves. A 95% confidence interval for this average is calculated as (13.45, 25.15).
To estimate the average number of latex gloves used per week by all healthcare workers with a latex allergy, a point estimate is obtained using the sample mean, which is 19.3 gloves. However, to assess the precision of this estimate, a confidence interval is constructed. The formula for the confidence interval is given by:
CI = x ± t*(S/√n),
where x is the sample mean, S is the sample standard deviation, n is the sample size, and t is the critical value corresponding to the desired confidence level (in this case, 95%).
Given the summary statistics x = 19.3, S = 11.9, and n = 46, we can calculate the confidence interval as (13.45, 25.15). This means that we are 95% confident that the true average number of latex gloves used per week by all healthcare workers with a latex allergy lies between 13.45 and 25.15 gloves.
The interpretation of this confidence interval is that if we were to repeat the sampling process multiple times and construct 95% confidence intervals, approximately 95% of those intervals would contain the true population average. Therefore, based on this specific interval, we can reasonably claim that we are 95% confident that the average number of latex gloves used per week by all healthcare workers with a latex allergy falls within the range of 13.45 to 25.15 gloves.
To learn more about interval click here: brainly.com/question/29126055
#SPJ11
Suppose scores on a final engineering exam are normally distributed with a mean of 70% and a standard deviation of 5%. Students achieving a grade of________ or more on the exam will score in the top 8.5%. Include the % sign and round your answer to two decimal places. Fill in the blank
Students achieving a grade of approximately 78.16% or more on the final engineering exam which are normally distributed with mean 70% and standard deviation 5% will score in the top 8.5%.
To determine the grade cutoff for the top 8.5%, we need to find the z-score associated with this percentile in the standard normal distribution. The z-score represents the number of standard deviations above or below the mean a particular value is.
First, we need to find the z-score corresponding to the top 8.5% of the distribution. This can be calculated using the inverse normal distribution function or by looking up the value in a standard normal distribution table. The z-score associated with the top 8.5% is approximately 1.0364.
Next, we can calculate the grade cutoff by using the formula:
cutoff = mean + (z-score × standard deviation)
cutoff = 70 + (1.0364 × 5)
cutoff ≈ 78.16
Therefore, students achieving a grade of approximately 78.16% or more on the final engineering exam will score in the top 8.5%.
Learn more about mean here:
brainly.com/question/31101410
#SPJ11
"
Find the characteristic polynomial and the eigenvalues of the matrix. 5 4 - 2 2 The characteristic polynomial is (Type an expression using a as the variable.
Therefore, the eigenvalues of matrix A are:λ₁=-1andλ₂=8Hence the characteristic polynomial is:p(λ) = λ² -3λ - 8.
Let's calculate the determinant of (A−λI) as shown below:5−λ4−22−λ=λ²−3λ−8= (λ+1)(λ-8) Therefore the eigenvalues of matrix A are:λ₁=-1andλ₂=8Hence the characteristic polynomial is: p(λ) = λ² -3λ - 8.
The characteristic polynomial is p(λ) = λ² -3λ - 8.
Therefore, the characteristic polynomial of the given matrix is λ² -3λ - 8, and the eigenvalues of the matrix are -1 and 8.Long Answer: The given matrix is A = [5 4 -2 2].Therefore, we can write the equation as (A−λI)X=0, where X is the eigenvector corresponding to the eigenvalue λ.Now, we will calculate the determinant of (A−λI) to find the eigenvalues. Let's calculate the determinant of (A−λI) as shown below:|A - λI| = 5 - λ4 - 2-22 - λ= λ² - 3λ - 8Now, we will solve the above equation to find the eigenvalues of matrix A.λ² - 3λ - 8=0⇒ (λ+1)(λ-8)=0Therefore the eigenvalues of matrix A are:λ₁=-1andλ₂=8Hence the characteristic polynomial is: p(λ) = λ² -3λ - 8.
To know more about polynomial visit:
https://brainly.com/question/11536910
#SPJ11
A farmer owns a 300 acre farm and plans to plant at most three crops (wheat, corn, cotton). The seed for crops wheat, corn and cotton costs $30, $40, and $50 per acre, respectively. A maximum of $6 per acre, respectively. A maximum of $3,200 can be spent on seed. Crops A, B, and C require 1, 2, and 1 workdays per acre, respectively, and there are a maximum of 160 workdays available. If the farmer can make a profit of $100 per acre on crop A, $300 per acre on crop B, and $200 per acre on crop C, how many acres of each crop should be planted to maximize profit?
By planting 60 acres of wheat, 80 acres of corn, and 60 acres of cotton, the farmer will maximize their profit.
To maximize profit, we need to set up an optimization problem with the given constraints. Let's denote the number of acres of wheat, corn, and cotton as x, y, and z, respectively.
The objective function to maximize profit is:
P = 100x + 300y + 200z
We have the following constraints:
Total acres planted:
x + y + z ≤ 300
Total seed cost:
30x + 40y + 50z ≤ 3200
Total workdays required:
x + 2y + z ≤ 160
To solve this problem, we can use linear programming techniques. However, since we are limited to text-based responses, I will provide you with the optimal solution without showing the step-by-step calculations.
After solving the optimization problem, the optimal solution for maximizing profit is as follows:
Wheat (Crop A): Plant 60 acres.
Corn (Crop B): Plant 80 acres.
Cotton (Crop C): Plant 60 acres.
To know more about profit,
https://brainly.com/question/7016333
#SPJ11
force of 6 lb is required to hold a spring stretched 8 inches beyond its natural length. How much work is done in stretching it from its natural length to 11 inches beyond its natural length?
The work done in stretching a spring from its natural length to 11 inches beyond its natural length is 12.6 foot-pounds. This can be calculated using the following formula:
W = ∫_0^x kx dx
where W is the work done, x is the distance the spring is stretched, and k is the spring constant.
The spring constant can be found using the following formula:
k = F/x
where F is the force required to hold the spring stretched and x is the distance the spring is stretched.
In this case, F = 6 lb and x = 8 inches = 2/3 ft. Therefore, the spring constant is k = 90 lb/ft.
The work done can now be calculated using the following formula:
W = ∫_0^x kx dx
= ∫_0^2/3 * 90 * x dx
= 30 * x^2/2
= 30 * (2/3)^2/2
= 12.6 foot-pounds
Therefore, the work done in stretching the spring from its natural length to 11 inches beyond its natural length is 12.6 foot-pounds.
To learn more about spring constant : brainly.com/question/29975736
#SPJ11
suppose a is the matrix [2512−60−29] find c, d, and c−1 such that a=cdc−1. c= [ ] , d= [ 0 ] 0 , c−1= [ ] .
Matrix is[tex]a = [2512-60-29][/tex]. Now, we need to find c, d, and c−1 such that a=cdc−1. For this, we can use the concept of matrix multiplication.
In order to multiply two matrices A and B, the number of columns in A must be equal to the number of rows in B.
Therefore, we can separate the matrix a into two matrices c and d such that [tex]a=cdc-1[/tex] as follows: [tex]c = [ 2 1 - 1 2 ] , d = [ 5 0 0 -3 ][/tex] and [tex]c^-1 = [ 2 1 1 2 ][/tex] .
To find c, d, and c−1 such that a=cdc−1, we can use the concept of matrix multiplication. In order to multiply two matrices A and B, the number of columns in A must be equal to the number of rows in B.
Therefore, we can separate the matrix a into two matrices c and d such that a=cdc−1 as follows: [tex]c = [ 2 1 -1 2 ][/tex], [tex]d = [ 5 0 0 - 3 ][/tex] and [tex]c-1 = [ 2 1 1 2 ][/tex].
Thus, we can say that [tex]a = [2512-60-29][/tex]can be separated into [tex]c = [ 2 1 - 1 2 ] , d = [ 5 0 0 - 3 ][/tex] and[tex]c-1 = [ 2 1 1 2 ][/tex] by using the matrix multiplication property. Therefore, the solution is obtained.
To know more about Matrix visit -
brainly.com/question/29000721
#SPJ11
3. (5 marks) State whether the following statements are true or false. Explain your answers. (a) If a system of equations has no free variables, then it has a unique solution. (b) If a system Ax = b has more than one solution, then so does the system Ax = 0. (c) If a system of equations has more variables than equations, then it has infinitely many solutions. (d) If a system of equations has more equations than variables, then it has no solution. (e) Every matrix has a unique row echelon form.
The answers to the following statements are as follows: (a) True, (b) False, (c) True, (d) False, (e) False
Understanding System of Equations(a) True. If a system of equations has no free variables, it means that each variable is uniquely determined by the other variables. This implies that there is a unique solution for the system.
(b) False. It is possible for a system Ax = b to have multiple solutions while the homogeneous system Ax = 0 has only the trivial solution (where all variables are zero). The existence of multiple solutions for Ax = b does not guarantee the existence of non-trivial solutions for Ax = 0.
(c) True. If a system of equations has more variables than equations, it means there are more unknowns than there are independent equations to solve for them. This typically leads to an underdetermined system with infinitely many solutions. The presence of extra variables allows for the introduction of free variables, leading to a solution space with infinitely many possibilities.
(d) False. If a system of equations has more equations than variables, it may still have solutions. It is possible for an overdetermined system to have a consistent solution, but not all equations will be satisfied. In such cases, the system is said to be inconsistent or have redundant equations.
(e) False. Not every matrix has a unique row echelon form. The row echelon form of a matrix depends on the specific sequence of row operations performed during the row reduction process. While row echelon form is useful in solving systems of linear equations and analyzing matrix properties, there can be different valid sequences of row operations that lead to different row echelon forms for the same matrix.
Learn more about system of equation here:
https://brainly.com/question/13729904
#SPJ4
Ages of Proofreaders At a large publishing company, the mean age of proofreaders is 36.2 years and the standard deviation is 3.7 years. Assume the variable is normally distributed. Round intermediate z-value calculations to two decimal places and the final answers to at least four decimal places. Part 1 of 2 If a proofreader from the company is randomly selected, find the probability that his or her age will be between 36.5 and 38 years. Part 2 of 2 If a random sample of 15 proofreaders is selected, find the probability that the mean age of the proofreaders in the sample will be between 36.5 and 38 years. Assume that the sample is taken from a large population and the correction factor can be ignored.
Part 1:
Given:
Mean age of proofreaders [tex]($\mu$)[/tex] = 36.2 years
Standard deviation of proofreaders [tex]($\sigma$)[/tex] = 3.7 years
We need to find the probability that the age of a randomly selected proofreader is between 36.5 and 38 years.
To solve this, we will standardize the values using the z-score formula:
[tex]\[z = \frac{x - \mu}{\sigma}\][/tex]
where [tex]$x$[/tex] is the value of interest.
For the lower bound, [tex]$x_1 = 36.5$:[/tex]
[tex]\[z_1 = \frac{36.5 - 36.2}{3.7} = 0.0811\][/tex]
For the upper bound, [tex]$x_2 = 38$:[/tex]
[tex]\[z_2 = \frac{38 - 36.2}{3.7} = 0.4865\][/tex]
Now, we need to find the probability between these two z-values using the standard normal distribution table or calculator.
[tex]\[P(36.5 \leq x \leq 38) = P(z_1 \leq z \leq z_2)\][/tex]
Using the standard normal distribution table or calculator, we find the corresponding probabilities for [tex]$z_1$ and $z_2$[/tex] and subtract the lower probability from the higher probability:
[tex]\[P(36.5 \leq x \leq 38) = P(z_1 \leq z \leq z_2) = P(0.0811 \leq z \leq 0.4865) = 0.1856\][/tex]
Therefore, the probability that the age of a randomly selected proofreader will be between 36.5 and 38 years is 0.1856.
Part 2:
Given:
Mean age of proofreaders [tex]($\mu$)[/tex] = 36.2 years
Standard deviation of proofreaders [tex]($\sigma$)[/tex] = 3.7 years
Sample size [tex]($n$)[/tex] = 15
We need to find the probability that the mean age of a random sample of 15 proofreaders will be between 36.5 and 38 years.
Since the sample size is large and we assume the variable is normally distributed, we can use the Central Limit Theorem to approximate the distribution of the sample mean as a normal distribution.
The mean of the sample means [tex]($\mu_{\bar{x}}$)[/tex] is equal to the population mean [tex]($\mu$)[/tex], which is 36.2 years.
The standard deviation of the sample means [tex]($\sigma_{\bar{x}}$),[/tex] also known as the standard error, is calculated using the formula:
[tex]\[\sigma_{\bar{x}} = \frac{\sigma}{\sqrt{n}}\][/tex]
where [tex]$\sigma$[/tex] is the population standard deviation and [tex]$n$[/tex] is the sample size.
[tex]\[\sigma_{\bar{x}} = \frac{3.7}{\sqrt{15}} \approx 0.9543\][/tex]
Now, we can standardize the values using the z-score formula:
For the lower bound, [tex]$x_1 = 36.5$:[/tex]
[tex]\[z_1 = \frac{36.5 - 36.2}{0.9543} = 0.3138\][/tex]
For the upper bound, [tex]$x_2 = 38$:[/tex]
[tex]\[z_2 = \frac{38 - 36.2}{0.9543} = 1.8771\][/tex]
Using the standard normal distribution table or calculator, we find the corresponding probabilities for [tex]$z_1[/tex] [tex]$ and $z_2$[/tex] and subtract the lower probability from the higher probability:
[tex]\[P(36.5 \leq \bar{x} \leq 38) = P(z_1 \leq z \leq z_2) = P(0.3138 \leq z \leq 1.8771)\][/tex]
Using the standard normal distribution table or calculator, we find the probabilities for [tex]$z_1$ and $z_2$:[/tex]
[tex]\[P(0.3138 \leq z \leq 1.8771) \approx 0.4307\][/tex]
Therefore, the probability that the mean age of a random sample of 15 proofreaders will be between 36.5 and 38 years is approximately 0.4307.
To know more about distribution visit-
brainly.com/question/32575596
#SPJ11