The lifetime of a semiconductor laser at a constant power is normally distributed with a mean of 5000 hours and a standard deviation of 1000 hours. What is the first quartile of the distribution of the semiconductor lifetime

Find the inverse of the matrix A - sI, which gives the resolvent matrix G(s). Use the state equation formulation to derive G(s) and compare it with the answer obtained in part a.

Part a:

To solve for Vout(s) using the voltage divider equation in the Laplace domain, you can use the formula Vout(s) = Vin(s) * (R2 / (R1 + R2)).

Simply substitute the given values for R1, R2, and Vin(s) into the equation, and solve for Vout(s).

Part b:

To find the resolvent matrix, first, write the state equations in matrix form. Then, calculate the determinant of the matrix A - sI, where A is the coefficient matrix and I is the identity matrix.

Finally, find the inverse of the matrix A - sI, which gives the resolvent matrix G(s). Use the state equation formulation to derive G(s) and compare it with the answer obtained in part a.

To know more about voltage visit:

https://brainly.com/question/32002804

#SPJ11

To solve for ???????? (????) ????(????) using the voltage divider equation in the Laplace domain, we need specific values for resistances R1 and R2, and the input voltage Vin(s).

To find the resolvent matrix and g(s) using the state equation formulation, we need to know the matrices A and B, as well as the Laplace transform of the input function.

Part a: To solve for ???????? (????) ????(????) using the voltage divider equation in the Laplace domain, we need to understand the voltage divider equation and how it relates to Laplace transforms.

The voltage divider equation states that the voltage across a resistor in a series circuit is equal to the product of the total voltage and the ratio of the resistance of that particular resistor to the total resistance of the circuit.

In the Laplace domain, we can represent the impedance of a resistor as R. The Laplace transform of the voltage divider equation is given by:

Vout(s) = Vin(s) * (R2 / (R1 + R2))

Here, Vin(s) represents the Laplace transform of the input voltage, Vout(s) represents the Laplace transform of the output voltage, and R1 and R2 are the resistances in the circuit.

To solve for ???????? (????) ????(????), we need to have specific values for the resistances R1 and R2, and the input voltage Vin(s).

Once we have those values, we can plug them into the voltage divider equation and simplify to find the output voltage Vout(s) in the Laplace domain.

Part b: To find the resolvent matrix and g(s) using the state equation formulation, we need to understand the concept of state equations and the relationship between the resolvent matrix and the Laplace transform.

In state equations, we represent a system using a set of first-order differential equations that describe the behavior of the system's state variables. The state variables represent the internal states of the system.

The general form of a state equation is given by:

dx/dt = Ax + Bu

Here, x represents the vector of state variables, A is the matrix of coefficients for the state variables, B is the matrix of coefficients for the input variables, u represents the input vector, and dx/dt represents the derivative of x with respect to time.

To find the resolvent matrix, we need to find the matrix exponential of the coefficient matrix A. The matrix exponential is denoted as e^(At), where t represents time. The resolvent matrix is given by:

R(s) = (sI - A)^(-1)

Here, s represents the Laplace variable and I represents the identity matrix.

Once we have the resolvent matrix, we can find g(s) by multiplying it with the matrix B and taking the inverse Laplace transform. The inverse Laplace transform of g(s) will give us the output function in the time domain.

It is important to note that to fully solve for g(s), we need to know the specific values of the matrices A and B, as well as the Laplace transform of the input function.

In summary, to solve for ???????? (????) ????(????) using the voltage divider equation in the Laplace domain, we need specific values for resistances R1 and R2, and the input voltage Vin(s).

To find the resolvent matrix and g(s) using the state equation formulation, we need to know the matrices A and B, as well as the Laplace transform of the input function.

Learn more about voltage divider equation:

https://brainly.com/question/30762912

#SPJ11

Adding up the distances in each direction, he covered a total of 14 blocks. From Myles' home, he walked his dog north 5 blocks and then east 2 blocks, reaching a drinking fountain. After that, he walked north 3 more blocks and east 4 more blocks. Due to the rain, he decided to cut through a field and walk straight home.

To calculate the total number of blocks Myles walked, we need to add up the distances he walked in each direction.

From his home to the drinking fountain, Myles walked 5 blocks north and 2 blocks east. Therefore, the total distance covered in this part is 5 + 2 = 7 blocks.

From the drinking fountain to his final destination (home), Myles walked 3 blocks north and 4 blocks east. Thus, the total distance in this part is 3 + 4 = 7 blocks.

Adding up the distances from both parts, we get 7 + 7 = 14 blocks. Therefore, Myles walked a total of 14 blocks in all.

To summarize, Myles walked 5 blocks north, 2 blocks east, 3 blocks north, 4 blocks east, and then cut through a field to reach home. Adding up the distances in each direction, he covered a total of 14 blocks.

To know more about field here

https://brainly.com/question/31937375

#SPJ11

The slopes of line segments [tex]\(MN\)[/tex] and [tex]\(AD\)[/tex] are equal, indicating that the median of the isosceles trapezoid is parallel to the bases. This completes the coordinate proof.

To prove that the median of an isosceles trapezoid is parallel to the bases using a coordinate proof, let's consider the vertices of the trapezoid as [tex]\(A(x_1, y_1)\), \(B(x_2, y_2)\), \(C(x_3, y_3)\), and \(D(x_4, y_4)\).[/tex]

The midpoints of the non-parallel sides [tex]\(AB\)[/tex] and [tex]\(CD\)[/tex] can be found as follows:

[tex]\[M\left(\frac{x_1 + x_2}{2}, \frac{y_1 + y_2}{2}\right)\][/tex]

[tex]\[N\left(\frac{x_3 + x_4}{2}, \frac{y_3 + y_4}{2}\right)\][/tex]

The slope of line segment [tex]\(MN\)[/tex] is given by:

[tex]\[m_{MN} = \frac{y_2 - y_1}{x_2 - x_1}\][/tex]

Similarly, the slope of line segment [tex]\(AD\)[/tex] is:

[tex]\[m_{AD} = \frac{y_4 - y_1}{x_4 - x_1}\][/tex]

To prove that [tex]\(MN\)[/tex] is parallel to the bases, we need to show that [tex]\(m_{MN} = m_{AD}\).[/tex]

By substituting the coordinates of [tex]\(M\)[/tex] and [tex]\(N\)[/tex] into the slope formulas, we have:

[tex]\[m_{MN} = \frac{\frac{y_2 + y_1}{2} - y_1}{\frac{x_2 + x_1}{2} - x_1}\][/tex]

[tex]\[m_{MN} = \frac{y_2 - y_1}{x_2 - x_1}\][/tex]

Similarly, for [tex]\(m_{AD}\):[/tex]

[tex]\[m_{AD} = \frac{y_4 - y_1}{x_4 - x_1}\][/tex]

Comparing the two expressions, we see that [tex]\(m_{MN} = m_{AD}\).[/tex]

Therefore, the slopes of line segments [tex]\(MN\)[/tex] and [tex]\(AD\)[/tex] are equal, indicating that the median of the isosceles trapezoid is parallel to the bases. This completes the coordinate proof.

To know more about trapezoid visit -

brainly.com/question/2516570

#SPJ11

The missing side length(s) in the given 45° - 45° - 90° triangle are:
- Length of one leg: √2 in (rationalized as √2)
- Length of the other leg: √2 in (rationalized as √2)

To find the missing side length(s) in a 45° - 45° - 90° triangle, we can use the following ratios:

1. The ratio of the length of the hypotenuse to one of the legs is √2 : 1.
2. The ratio of the length of one leg to the other leg is 1 : 1.

In the given triangle, the hypotenuse is 1 in.

Using the first ratio, we can determine the length of one of the legs by multiplying the hypotenuse length by √2.

Length of one leg = 1 in * √2 = √2 in.

Since the ratio of the lengths of the legs in a 45° - 45° - 90° triangle is 1 : 1, the other leg will also have a length of √2 in.

Now let's rationalize the denominators by multiplying the numerators and denominators of the lengths by the conjugate of √2, which is also √2.

Rationalized length of one leg = (√2 in * √2) / √2 = 2√2 / 2 = √2 in.

Rationalized length of the other leg = (√2 in * √2) / √2 = 2√2 / 2 = √2 in.

Learn more about rationalized here :-

https://brainly.com/question/33206962

#SPJ11

The value of tan 2 π is 0. The tangent function has a periodicity of π, which means it repeats every π radians.

To find the value of tan 2 π without using a calculator, we need to understand the properties of the tangent function. The tangent function has a periodicity of π, which means it repeats every π radians.

Since 2 π is a complete revolution, the angle 2 π is equivalent to 0 radians. At 0 radians, the value of the tangent function is 0.

To calculate this, we can use the formula for the tangent function:

tan x = sin x / cos x

At 0 radians, the value of sin 0 is 0, and the value of cos 0 is 1. Therefore,

tan 2 π = sin 2 π / cos 2 π

Since sin 2 π = 0 and cos 2 π = 1, we have:

tan 2 π = 0 / 1 = 0

So, the value of tan 2 π without using a calculator is 0.

To know more about the tangent function visit:

https://brainly.com/question/1533811

#SPJ11

A gardener ropes off a triangular plot for a flower bed. Two of the corners in the bed measures 35 degrees and 78 degrees. if one of the sides is 3m long then the gardener needs approximately 1.7208 meters of rope to enclose her flower bed.

To find the length of the rope needed to enclose the flower bed, we need to find the length of the third side of the triangle.

1. First, we can find the measure of the third angle by subtracting the sum of the two given angles (35 degrees and 78 degrees) from 180 degrees.
  The third angle measure is 180 - (35 + 78) = 180 - 113 = 67 degrees.

2. Next, we can use the Law of Sines to find the length of the third side. The Law of Sines states that the ratio of the length of a side to the sine of its opposite angle is the same for all sides and their opposite angles in a triangle.
  Let's denote the length of the third side as x. Using the Law of Sines, we have:
  (3m / sin(35 degrees)) = (x / sin(67 degrees))
  Cross-multiplying, we get:
  sin(67 degrees) * 3m = sin(35 degrees) * x
  Dividing both sides by sin(67 degrees), we find:
  x = (sin(35 degrees) * 3m) / sin(67 degrees)

3. Finally, we can substitute the values into the equation and calculate the length of the third side:
  x = (sin(35 degrees) * 3m) / sin(67 degrees)
  x ≈ (0.5736 * 3m) / 0.9211
  x ≈ 1.7208m
Therefore, the gardener needs approximately 1.7208 meters of rope to enclose her flower bed.

To know more about Law of Sines visit:

https://brainly.com/question/21634338

#SPJ11

Add up all the average monthly rainfalls to get the sum. Make sure to follow the specific instructions given in the lesson and use the correct units for rainfall, such as inches or millimeters.

To find the sum of the average monthly rainfalls in the i Ready lesson, you will need to add up the average amounts of rainfall for each month. Start by gathering the monthly rainfall data and calculate the average rainfall for each month.

Then, add up all the average monthly rainfalls to get the sum. Make sure to follow the specific instructions given in the lesson and use the correct units for rainfall, such as inches or millimeters.

Take your time to accurately calculate the sum and double-check your work to ensure accuracy. If you encounter any difficulties, feel free to ask for further assistance.

to learn more about average rainfall

https://brainly.com/question/31337778

#SPJ11

the vector pq is drawn from origin to point (1,-3)

To sketch the vector  p q in the plane, we start at the initial point p (2, -2) and end at the terminal point q (3, -5).

First, draw a coordinate system with x and y axes. Then plot the point p at (2, -2) and the point q at (3, -5).

Next, draw an arrow from point p to point q. The length of the arrow represents the magnitude of the vector, and the direction of the arrow represents the direction of the vector.

The vector p q can be represented as the difference between the coordinates of q and p:

p q = (3, -5) - (2, -2) = (1, -3)

So the vector pq is drawn from origin to point (1,-3)

Learn more about vector here

https://brainly.com/question/24256726

#SPJ4

We can conclude that if the TV volume is too loud, I will have to rest.

Based on the law of syllogism, we can draw the following conclusion from the given statements:

If the TV volume is too loud, then it will give me a headache.
If I have a headache, then I will have to rest.
Therefore, if the TV volume is too loud, then I will have to rest.

The law of syllogism allows us to link two conditional statements to form a conclusion. In this case, we can see that if the TV volume is too loud, it will give me a headache.

And if I have a headache, I will have to rest. Therefore, we can conclude that if the TV volume is too loud, I will have to rest.

Know more about the law of syllogism,

https://brainly.com/question/28560801

#SPJ11

Answer:

Page 218

Step-by-step explanation:

Let x = the first page

Let x + 1 =  the second page

x + x+ 1 = 437 combine like terms

2x + 1 = 437   Subtract 1 from both sides

2x = 436  Divide both sides by 2

x = 218

Check:

218 + 219 = 437

437 = 437

Helping in the name of Jesus.

w - z expressed in rectangular form is (1 - √3, -√3 + i).

Given: The complex numbers w = 2(cos(210°) + isin(210°)) and z = 2(cos(330°) + isin(330°))

To find: The expression of w - z in rectangular form using (x,y)

Solution: We know that rectangular form of complex number is given by:

z = x + iy

where x and y are the real and imaginary parts respectively.

So, w = 2(cos(210°) + isin(210°)) can be written as:

w = 2(cos(-150°) + isin(-150°))

Comparing with the rectangular form, we get:

x = 2cos(-150°) = 2 * (1/2) = 1 and

y = 2sin(-150°) = 2 * (-√3/2) = -√3

So, w = 1 - √3i

Similarly, z = 2(cos(330°) + isin(330°)) can be written as:

z = 2(cos(-30°) + isin(-30°))

Comparing with the rectangular form, we get:

x = 2cos(-30°) = 2 * (√3/2) = √3 and y = 2sin(-30°) = 2 * (-1/2) = -1

So, z = √3 - i

Now, w - z = (1 - √3i) - (√3 - i)

We get, w - z = 1 - √3i - √3 + i

Moving the real part to the front and the imaginary part to the end, we get: w - z = (1 - √3) + (-√3 + i)

Therefore, w - z expressed in rectangular form is (1 - √3, -√3 + i).

Learn more about rectangular form visit:

brainly.com/question/31762070

#SPJ11

In Mary's study, the independent variable (IV) would be the background noise level.

The independent variable (IV) in Mary's study is the background noise level because it is the variable that Mary manipulates or controls to observe its effect on the learning of 6th graders. Mary will likely expose different groups of students to varying levels of background noise and then compare their learning outcomes. By manipulating the background noise level, Mary can determine whether it has an impact on the students' learning performance.

To know more about variable,

https://brainly.com/question/28025923

#SPJ11

The given set of probabilities represents a valid probability distribution.

The provided probabilities for the number of car thefts reported in a given day satisfy the requirements of a probability distribution. Each probability is non-negative, and the sum of all probabilities equals 1. The probabilities correspond to the values 0, 1, 2, 3, and 4, which represent the possible outcomes of the number of car thefts reported.

Therefore, this set of probabilities meets the criteria for a probability distribution, making it a valid representation of the probabilities associated with the different outcomes of car theft reports in a day for the police department.

Know more about  probability distribution here:

https://brainly.com/question/29062095

#SPJ11

On a hike, you find branches arranged to form a three-foot-tall pyramid, surrounded by a circle of pebbles. Occam's razor would support the hypothesis that the simplest explanation for creating this pyramid was that a person created it.

William of Ockham was a philosopher in the 14th century who came up with the principle of parsimony, also known as Occam's razor. When we are confronted with two explanations for the same thing, Occam's razor recommends that we choose the simplest explanation. The principle of parsimony is grounded on the idea that we should not add any additional assumptions to an explanation unless we have a good reason to do so.

Know more about William of Ockham here:

https://brainly.com/question/32102758

#SPJ11

The evaluation of the given expression with the values of x, y, and z, where `x = 2`, `y = -3`, and `z = 1` is 28.

The expression that needs to be evaluated is `

|2y - 15| + 7` if `x = 2, y = -3`, and `z = 1`.

Therefore, substituting the values of x, y, and z in the expression, we get:

|2y - 15| + 7

= |2(-3) - 15| + 7

= |-6 - 15| + 7

= |-21| + 7

= 21 + 7

= 28

Therefore, the value of the expression when x = 2, y = -3, and z = 1 is 28.

Thus, the evaluation of the given expression with the values of x, y, and z, where `x = 2`, `y = -3`, and `z = 1` is 28.

To know more about evaluation visit:-

https://brainly.com/question/14677373

#SPJ11

The number of hours Nadeem will be riding her bike can vary depending on her rate. It can range from 4 to 7.5 hours.

To find how many hours Nadeem will be riding her bike, we can use the formula:

distance = rate x time.

Let's assume Nadeem's rate is r mi/hr and the time she will be riding is t hours.

Given that Nadeem plans to ride her bike between 12 mi and 15 mi, we can set up the following inequality:

[tex]12 \leq r \times t \leq 15[/tex]

To solve for t, we can divide both sides of the inequality by r:

[tex]12/r \times t \leq 15/r[/tex]

Now, let's consider a few examples:

Example 1:
If Nadeem's rate is 3 mi/hr, we can substitute r = 3 into the inequality:[tex]12\leq r \times t \leq 15[/tex]
[tex]12/3 \leq t\leq15/3\\4 \leq t \leq 5[/tex]
This means Nadeem will be riding her bike for a duration between 4 hours and 5 hours.

Example 2:
If Nadeem's rate is 2 mi/hr, we can substitute r = 2 into the inequality:
[tex]12/2\leq t \leq 15/2\\6 \leq t \leq 7.5[/tex]
Since time cannot be negative, Nadeem will be riding her bike for a duration between 6 hours and 7.5 hours.

Therefore, the number of hours Nadeem will be riding her bike can vary depending on her rate. It can range from 4 to 7.5 hours.

Complete question:

Nadeem plans to ride her bike between 12mi and at most 15mi. Write and solve an inequality to model how many hours Nadeem will be riding.

To know more about inequality, visit:

https://brainly.com/question/28823603

#SPJ11

We can solve these problems by applying mathematical operations to mixed fractions.

1) He used 12 3/4 liters in his car and 3 2/5 liters in his motorbike.
First, we need to convert the mixed fractions to improper fractions.
12 3/4 = (12 x 4 + 3)/4 = 51/4
3 2/5 = (3 x 5 + 2)/5 = 17/5
Now, the total amount of petrol he used:
51/4 + 17/5 = (51 x 5 + 4 x 17)/(4 x 5) = 255/20 + 68/20 = 323/20
Next, we subtract the amount used from the total amount bought:
20 - 323/20 = (20 x 20 - 323)/20 = (400 - 323)/20 = 77/20
So, he has 77/20 liters of petrol left.

2) He spent rs 280 3/4 on food and rs 130 1/5 on other needs.
First, we need to convert the mixed fractions to improper fractions.
280 3/4 = (280 x 4 + 3)/4 = 1123/4
130 1/5 = (130 x 5 + 1)/5 = 651/5
Now, the total amount of money he spent:
1123/4 + 651/5 = (1123 x 5 + 4 x 651)/(4 x 5) = 5615/20 + 2604/20 = 8219/20
Next, we subtract the amount spent from the amount earned:
580 1/2 - 8219/20 = (1161 x 10 - 8219)/20 = (11600 - 8219)/20 = 3391/20
So, he has 3381/20 rs left.

3) Ranjeet plays cricket for 1 3/4 hours and swims for half an hour.
First, we need to convert the mixed fraction to an improper fraction.
1 3/4 = (1 x 4 + 3)/4 = 7/4
Now, the total time spent:
7/4 + 1/2 = (7 x 2 + 4 x 1)/(4 x 2) = 14/8 + 4/8 = 18/8
Next, we simplify the fraction:
18/8 = 9/4
So, Ranjeet spends 9/4 hours playing cricket and swimming.

Learn more about the mathematical operations of fractions here: https://brainly.com/question/1622425

#SPJ11

Answer:

see below

Step-by-step explanation:

To change from a larger unit to a smaller unit within the metric system: multiply by 10 for each step to the right

To change from a smaller unit to  a larger unit within the metric system: divide by 10 for each step to the left.

Example:
1 kilometer = 1,000 (multiply each step by 10 each time until you reach 1,000 for each step to the right)

Hope this helps! :)

If each pair of triangles is congruent, it means that corresponding sides and angles of the triangles are equal. In this case, the congruence theorem that applies is the Side-Angle-Side (SAS) congruence theorem.

According to the SAS theorem, if two sides and the included angle of one triangle are congruent to two sides and the included angle of another triangle, then the triangles are congruent.

This means that if we can establish that the corresponding sides and the included angles of each pair of triangles are equal, we can conclude that the triangles are congruent. The SAS congruence theorem is a fundamental principle in geometry used to prove the congruence of triangles in various geometric problems.

To know more about triangle:

https://brainly.com/question/3770177

#SPJ4

--The given question is incomplete, the complete question is given below "  Assume If each pair of triangles are congruent. if so, which congruence theorem or postulate applies? "--

The probability that four or less adults exercise regularly out of 11 randomly selected adults is approximately 0.9824.

This problem can be solved using the binomial distribution, since we are interested in the probability of a certain number of successes (adults who exercise regularly) in a fixed number of trials (selecting 11 adults randomly).

Let X be the number of adults who exercise regularly out of 11. Then X has a binomial distribution with parameters n = 11 and p = 0.25, since the probability of success (an adult who exercises regularly) is 0.25.

We want to find the probability that four or less adults exercise regularly, which is equivalent to finding the probability of X ≤ 4. We can use the binomial cumulative distribution function to calculate this probability:

P(X ≤ 4) = Σ P(X = k), for k = 0, 1, 2, 3, 4

Using a calculator, spreadsheet software, or a binomial probability table, we can find the probabilities for each value of k, and then add them up to get the cumulative probability:

P(X = 0) = (11 choose 0) * (0.25)^0 * (0.75)^11 = 0.0563

P(X = 1) = (11 choose 1) * (0.25)^1 * (0.75)^10 = 0.2015

P(X = 2) = (11 choose 2) * (0.25)^2 * (0.75)^9 = 0.3159

P(X = 3) = (11 choose 3) * (0.25)^3 * (0.75)^8 = 0.2747

P(X = 4) = (11 choose 4) * (0.25)^4 * (0.75)^7 = 0.1340

P(X ≤ 4) = 0.0563 + 0.2015 + 0.3159 + 0.2747 + 0.1340 = 0.9824

Therefore, the probability that four or less adults exercise regularly out of 11 randomly selected adults is approximately 0.9824.

Learn more about " binomial distribution" : https://brainly.com/question/15246027

#SPJ11

Therefore, the sample proportion for rolling a 2 is 0.267, the margin of error for a 95% confidence level is 0.114, and the 95% confidence interval for the population proportion is (0.153, 0.381).

To find the sample proportion, margin of error, and confidence interval for rolling a 2 on a number cube rolled 30 times, you can follow these steps:

1. Determine the number of times a 2 was rolled in the 30 trials. Let's say you rolled a 2, 8 times.
2. Calculate the sample proportion by dividing the number of times a 2 was rolled by the total number of trials: 8/30 = 0.267.
3. To find the margin of error for a 95% confidence level, use the formula: margin of error = 1.96 * sqrt((sample proportion * (1 - sample proportion)) / sample size).
  In this case, the sample size is 30. So, substitute the values into the formula: margin of error = 1.96 * sqrt((0.267 * (1 - 0.267)) / 30) = 0.114.
4. Finally, to find the 95% confidence interval for the population proportion, subtract and add the margin of error to the sample proportion:
  Lower bound = sample proportion - margin of error = 0.267 - 0.114 = 0.153
  Upper bound = sample proportion + margin of error = 0.267 + 0.114 = 0.381

Therefore, the sample proportion for rolling a 2 is 0.267, the margin of error for a 95% confidence level is 0.114, and the 95% confidence interval for the population proportion is (0.153, 0.381).

To know more about interval visit:

https://brainly.com/question/30486507

#SPJ11

Any inequality of the form "x ≥ x" or "x ≤ x" represents a solution set of all real numbers. Inequality "x ≥ x" means that any value of x that is greater than or equal to itself satisfies the inequality.

Since every real number is equal to itself, the solution set is all real numbers. Similarly, "x ≤ x" indicates that any value of x that is less than or equal to itself satisfies the inequality, resulting in the solution set of all real numbers. This is always true, regardless of the value of x, since any number less than 1 is positive. Therefore, the solution set for x is all real numbers.

The inequality "x ≥ x" or "x ≤ x" represents the set of all real numbers as its solution, as any real number is greater than or equal to itself, and any real number is also less than or equal to itself. Therefore, the solution set for x is all real numbers.

To know more about  inequality visit:

https://brainly.com/question/20383699

#SPJ11

The vectors (3, 5/6) and  (-10/9, 4) are normal because the dot product of two vectors is 0.

To determine if a vector is normal (perpendicular) to another vector, we need to check if their dot product is zero.

Let's calculate the dot product of the given vectors:

Vector 1: (3, 5/6)

Vector 2: (-10/9, 4)

The dot product of two vectors, A = [tex](a_1, a_2)[/tex] and B =[tex](b_1, b_2)[/tex], is given by:

[tex]A.B = (a_1 \times b_1) + (a_2 \times b_2)[/tex]

Let's calculate the dot product:

[tex](3 \times \frac{-10}{9} ) + (\frac{5}{6} \times 4)[/tex]

= (-30/9) + (20/6)

= (-10/3) + (20/6)

= (-20/6) + (20/6)

= 0

Since the dot product of the given vectors is zero, we can conclude that the vectors are normal (perpendicular) to each other.

To learn more on Vectors click here:

https://brainly.com/question/29740341

#SPJ4

Complete question:

( 3, 5/6) and ( - 10/9, 4) are two vectors, check whether the vectors normal?

The arithmetic average return for the mutual fund that reported a return of 5% every year for the last 3 years is 5%

The arithmetic average return for a mutual fund that reported a return of 5% every year for the last 3 years can be calculated by adding all the returns and dividing by the number of years.

Let’s calculate it in detail below:

To calculate the average return of a mutual fund that reported a return of 5% every year for the last 3 years, the following steps can be followed:

Step 1: Add the returns for the last 3 years. 5% + 5% + 5% = 15%.

Step 2: Divide the total return by the number of years. 15% / 3 = 5%.

Therefore, the arithmetic average return for the mutual fund that reported a return of 5% every year for the last 3 years is 5%.

Arithmetic average return is the sum of returns for each year divided by the number of years. It is calculated to evaluate the performance of the fund over a period of time.

Learn more about: arithmetic average

https://brainly.com/question/28278424

#SPJ11

Both probabilities (p = 0.21 and p = 0.17) are non-zero, indicating that neither of the outcomes has a probability of 0.

In the given scenario, two outcomes, labeled as a and b, are mutually exclusive. This means that these outcomes cannot occur simultaneously. The probability of outcome a is given as p = 0.21, and the probability of outcome b is given as p = 0.17.

To determine which probability is equal to 0, we need to evaluate the given probabilities. It is clear that both probabilities are greater than 0 since p = 0.21 and p = 0.17 are positive values.

Therefore, in this specific scenario, neither of the probabilities (p = 0.21 and p = 0.17) is equal to 0. Both outcomes have non-zero probabilities, indicating that there is a chance for either outcome to occur.

To learn more about probabilities

https://brainly.com/question/29381779

#SPJ8

Answer:

Step-by-step explanation:

10/3 = 7/x

10 : 3 = 7 : x

x = 3 x 7 : 10

x = 21 : 10

x = 2.1 or 21/10

-------------------------------

check

10 : 3 = 7 : 2.1

3.33 = 3.33

same value the answer is good

There are 180 distinguishable ways to arrange the letters in the word "bubble".

When arranging the letters in the word "bubble," there are 6 letters in total. To find the number of distinguishable ways to arrange them, we can use the formula for permutations. Since "b" appears twice and "u" appears twice, we need to consider the repeated letters.

First, let's calculate the total number of arrangements without considering the repeated letters. This is given by 6!, which is equal to 720.

Now, we need to account for the repeated letters. Since "b" appears twice, we divide the total number of arrangements by 2!. Similarly, since "u" appears twice, we divide again by 2!. This gives us:

720 / (2! * 2!) = 720 / (2 * 2) = 720 / 4 = 180.

Therefore, there are 180 distinguishable ways to arrange the letters in the word "bubble".

Know more about distinguishable here:

https://brainly.com/question/31384583

#SPJ11

The probability that the system is idle in a single-server waiting line system can be calculated using the formula for the probability of zero arrivals during a given time period. In this case, the arrival pattern is characterized by a Poisson distribution with a rate of 3 customers per hour.

The arrival rate (λ) is equal to the average number of arrivals per unit of time. In this case, λ = 3 customers per hour. The average service time (μ) is given as 12 minutes, which can be converted to hours by dividing by 60 (12/60 = 0.2 hours).
The formula to calculate the probability that the system is idle is:
P(0 arrivals in a given time period) = e^(-λμ)
Substituting the values, we have:
P(0 arrivals in an hour) = e^(-3 * 0.2)
Calculating the exponent:
P(0 arrivals in an hour) = e^(-0.6)
Using a calculator, we find that e^(-0.6) is approximately 0.5488.
Therefore, the probability that the system is idle is approximately 0.5488.

To know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

The volume of gas varies inversely as its pressure p. In this problem, we are given that v = 80 cubic centimeters when p = 2000 millimeters of mercury. We need to find v when p = 320 millimeters of mercury.

To solve this, we can set up the equation for inverse variation: v = k/p, where k is the constant of variation.

To find the value of k, we can substitute the given values into the equation: 80 = k/2000. To solve for k, we can cross-multiply and simplify: 80 * 2000 = k, which gives us k = 160,000.

Now that we have the value of k, we can use it to find v when p = 320. Plugging these values into the equation, we get v = 160,000/320 = 500 cubic centimeters.

Therefore, v = 500 cm^3.

The volume v of the gas varies inversely with its pressure p. In this case, we are given the initial volume and pressure and need to find the volume when the pressure is different. We can solve this problem using the equation for inverse variation, v = k/p, where k is the constant of variation. By substituting the given values and solving for k, we find that k is equal to 160,000. Then, we can use this value of k to find the volume v when the pressure p is 320. By substituting these values into the equation, we find that the volume v is equal to 500 cubic centimeters.

Learn more about volume of gas:

https://brainly.com/question/25736513

#SPJ11

The statement "Rational expressions contain exponents" is sometimes true.

Sometimes true - ExplanationRational expressions are those expressions which can be written in the form of fractions with polynomials in the numerator and denominator. Exponents can appear in the numerator, denominator, or both of rational expressions, depending on the form of the expression. Therefore, it is sometimes true that rational expressions contain exponents, and sometimes they do not.For example, the rational expression `(x^2 + 2)/(x + 1)` contains an exponent of 2 in the numerator. On the other hand, the rational expression `(x + 1)/(x^2 - 4)` does not contain any exponents. Hence, the given statement is sometimes true.

To know more about Rational expressions visit:

brainly.com/question/17134322

#SPJ11