the green (upper) triangle has an area of . the purple (lower) triangle has an area of . place the orange triangle (square symbols) directly next to the green triangle so that the two triangles together make a rectangle. the total area of this rectangle is , which is the area of the green triangle.

Answer:

3000

Step-by-step explanation:

Answer:

Answer:

$1,392

Step-by-step explanation:

1,200(0.08)(2) = 192

1,200 + 192 = $1,392

Step-by-step explanation:

(A). Yes, overdetermined systems can be consistent.

As, the system of equations below is consistent because it has a solution

x1 = 2 , x2 = 4 , x1 + x2 = 6.

We have,

'Over-determined system is a system of linear equations, in which there are more equations than unknowns'.

If we have m equations and n variables where m>n (more equations than variables), then system can be consistent if last m−n equations are linear combinations of previous ones.

For e.g. Let us consider the system,

x + y = 1

x - y = 1

3x + y = 3

solving these equations, we can see

The only intersection point is (1,0). Thus, x= 1 and y= 0 is the solution of this system.

Thus, over-determined system can be consistent.

According to the options,

Hence, option A is correct.

Learn more about overdetermined systems here :

https://brainly.com/question/13161359

#SPJ4

x² + x² = 4

2x² = 4

x² = 2

x=√2

hope it helps

=109

Answer:

1650

Step-by-step explanation:

1732.5 / (1+5%) = 1732.5 / 1.05 = 1650

The flux of the vector field F is the integral of the normal component of the vector field over the surface.

The flux of the vector field F is the integral of the normal component of the vector field over the surface. In this case, the surface is the circle with radius r centered at the origin and the normal component of the vector field is just the z-component, which is equal to 2x. The integral of the normal component of the vector field over the circle is given by

Φ = ∫C 2x ds = ∫0 2π r2 2cosθ dθ

= 4πr2

This is the flux of the vector field F coming out of the circle.

Learn more about vector field here:

https://brainly.com/question/28168976

#SPJ4

The domain and range of the relation are { -2 } and { 4, 5, 6, 7 } respectively. The relation is not a function.

A function is simply a relationship that maps one input to one output, that is, each x-value can only have one y-value.

Given the relation in the question;

(-2,7), (-2,6), (-2,5), (-2,4)

For a relation to be a function, every x-value must have only one y-value mapped to it.

-2 appeared twice and its corresponding y-values are different.

Hence, the relation is Not a Function.

The Domains are the x-values and the Range are the y-values,

Domain: { -2 }

Range: { 4, 5, 6, 7 }

Learn more about functions here: brainly.com/question/2541698

#SPJ1

Answer:

(4,8) (0,2) (-6,-7)

Step-by-step explanation:

Perpendicular means it sort of makes a cross with 90º angle from the already existing line. Imagine it starts at (4,8) coordinate and comes falling to the left, passing through p(-4,-4) coordinate, the points it will go through will be (4,8) (0,2) and (-6,-7) respectively.

A sure way to do this is to mark every point that's on the table below and see which ones form a perpendicular line with the original.

Answer:

12345678901234567890

Answer:

absolutely

Step-by-step explanation:

Needs are for survival in life like food, rent or mortgage, utilities, and other expenses.  Transportation costs, insurance coverage, and any clothing and tools you need for work are included in this part of your budget.  A want includes expenses that you can comfortably live without and is not essential for survival.

we can compute A=3 by 3 matrix, B= 1 by 3 matrix

C=2 by 2 matrix D= 3 by 1 matrix  and E= 1 by 1 matrix ,

We can compute only AA ,AD,BA, BD,CC,DB,EE,

[tex]We\ have \ A=\left[\begin{array}{ccc}1&0&-1\\2&1&0\\3&2&1\end{array}\right] \\\\B=[1\ 2 \ 3]\\\\C=\left[\begin{array}{ccc}1&1\\1&1&\end{array}\right] \\\\D=\left[\begin{array}{ccc}1\\1\\1\end{array}\right] \\\\E=[3][/tex]

So ,we have to produced 25 matrix -

AA,AB,AC,AD,AE

BA,BB,BC,BD,BE

CA,CB,CC,CD,CE

DA,DB,DC,DD,DE

EA,EB,EC,ED,EE

To multiply two matrix column of first matrix equal to row of second matrix.

So we can compute A=3 by 3 matrix, B= 1 by 3 matrix

C=2 by 2 matrix D= 3 by 1 matrix  and E= 1 by 1 matrix ,

We can compute only AA ,AD,BA, BD,CC,DB,EE,

[tex]AA=\left[\begin{array}{ccc}1&0&-1\\2&1&0\\3&2&1\end{array}\right] \left[\begin{array}{ccc}1&0&-1\\2&1&0\\3&2&1\end{array}\right] \\\\AA=\left[\begin{array}{ccc}-2&-2&-2\\4&1&-2\\10&4&-2\end{array}\right] \\\\AD=\left[\begin{array}{ccc}0\\1\\6\end{array}\right] \\\\CC=\left[\begin{array}{ccc}2&2\\2&2\\\end{array}\right] \\\\EE=[9][/tex]

So we can compute A=3 by 3 matrix, B= 1 by 3 matrix

C=2 by 2 matrix D= 3 by 1 matrix  and E= 1 by 1 matrix ,

We can compute only AA ,AD,BA, BD,CC,DB,EE,

The complete question is :-

Let the matrices,

[tex]A=\left[\begin{array}{ccc}1&0&-1\\2&1&0\\3&2&1\end{array}\right] \\\\B=[1\ 2 \ 3]\\\\C=\left[\begin{array}{ccc}1&1\\1&1&\end{array}\right] \\\\D=\left[\begin{array}{ccc}1\\1\\1\end{array}\right] \\\\E=[3][/tex]

Which of the 25-matrix products AA, AB, AC ......EE are defined? Compute those products that are defined.

Learn more about matrix.

https://brainly.com/question/29132693

#SPJ4

Arithmetic operations on the directed numbers gives;

7) -7

8) +73

9) - 8

10) + 1

Any given number which has either a positive or negative sign is a directed number. Thus all numbers are directed in one way or the other. Some examples are: 8, +2, - 8.35, 10, 520 etc.

Performing an arithmetic operations on the given question, we have;

7) +9 - + 16 = +9 -(+16)

applying the rule of signs

+9 - (+16) = + 9 - 16

              = -7

8) +85 - + 12 = +85 - (+12)

applying the rule of signs

+85 - (+12) = +85 - 12

                 = +73

9) -6 - 2

applying the rule of signs

-6 -2 = -8

10) +13 - + 12 = +13 - (+12)

applying the rule of signs

+13 - (+12) = +13 - 12

                = +1

Learn more about directed numbers at https://brainly.com/question/29257646

#SPJ1

Answer:

C

Step-by-step explanation:

C. √2, √6,2√2 are not the lengths of the sides of a 30°-60°-90° triangle.

In a 30°-60°-90° triangle the ratio of the sides are always the same, the hypotenuse is twice the length of the shorter leg, and the longer leg is √3 times the length of the shorter leg.

A. 1/2, √3/2, 1 are the lengths of the sides of a 30°-60°-90° triangle. As the shorter leg is 1, the longer leg is 1√3=√3 and the hypotenuse is 12=2.

B. 5/2, 5√3/2, 10 are the lengths of the sides of a 30°-60°-90° triangle. As the shorter leg is 5/2, the longer leg is (5/2)*√3=5√3/2 and the hypotenuse is (5/2)*2=5

D. 3,3√3,6 are the lengths of the sides of a 30°-60°-90° triangle. As the shorter leg is 3, the longer leg is 3√3=3√3 and the hypotenuse is 32=6

So, option C is not the lengths of a 30°-60°-90° triangle.

Answer:

Step-by-step explanation:

Consider the following four matrices:

(1000),(0010),(0100),(0001).

See what happens when you solve the equation AB=BA

for each of those four (let B

be each one of those four). To facilitate it, write A=(acbd)

You will get a set of equations for the entries of a

which are easily solved. This trick is quite general.

It will take 28 minutes for them to fill the tank.

Work done is defined as the amount of force needed to move and object a certain distance. In essence, it is a measure of an energy transferred to or from an object which allows it to be moved.

Given that, an aquarium tank can hold 6300 liters of water. There are two pipes that can be used to fill the tank. The first pipe alone can fill the tank in 84 minutes. The second pipe can fill the tank in 42 minutes by itself.

Work done by first pipe in 1 minute = 1/84

Work done by second pipe in 1 minute = 1/42

The time taken by both the pipes together =

1 / 84 + 1 / 42 = 3 / 84

= 1/28

Therefore, time taken by  both the pipe = 28 minutes.

Hence, it will take 28 minutes for them to fill the tank.

Learn more about work done, click;

https://brainly.com/question/13662169

#SPJ1

a) The percentage of pregnancies should last between 269 and 282 days is 18%

b) The days should the longest 10% of all pregnancies last is 291 days.

c) According to the Central Limit Theorem, the distribution of this sample mean is 265. The model is a Normal model, and standard deviation is 17/(√(67)).

d) The probability that the mean duration of these patients' pregnancies will be less than 258 days is 0.03 or 3%

a) To find the percentage of pregnancies that should last between 269 and 282 days, we need to find the proportion of the area under the normal distribution curve that falls between those two values. This can be done using a standard normal table or calculator. Using a calculator, we find that the proportion of the area under the curve between 269 and 282 days is approximately 0.18 (or 18%).

b) To find the longest 10% of all pregnancies, we need to find the duration that corresponds to the 90th percentile. We can use the standard normal table or calculator to find that the duration that corresponds to the 90th percentile is approximately 291 days.

c) According to the Central Limit Theorem, the distribution of the sample mean, y, is a normal distribution with a mean of 265 days (the population mean) and a standard deviation of 17/(√(67)) days. So the model is a Normal model with mean 265 and standard deviation 17/(√(67))

d) To find the probability that the mean duration of these patients' pregnancies will be less than 258 days, we need to find the proportion of the area under the normal distribution curve that falls to the left of 258 days. Using a calculator, we can find that the proportion of the area under the curve to the left of 258 days is approximately 0.03 (or 3%).

Therefore, the correct answers are as given above

learn more about central limit theorem: https://brainly.com/question/17092136

#SPJ1

Answer: she had 433 yards

Step-by-step explanation:

The solution for x is x = -2 + sqrt(17) and x = -2 - sqrt(17) will give the brainliest.

What is the quadratic equation?

A quadratic equation is a type of polynomial equation of degree 2, that can be written in the form of ax^2 + bx + c = 0 where x is the variable, a,b,c are constant and a is not equal to zero.

To solve for x in the equation 9/(x+4) = 2x, we can first clear the fractions by multiplying both sides of the equation by (x+4). This gives us:

9 = 2x*(x+4)

Then we can simplify the right side of the equation:

9 = 2x^2 + 8x

Next, we can move all the x terms to one side of the equation and all the constants to the other side:

2x^2 + 8x - 9 = 0

Now we can use the quadratic formula to solve for x:

x = (-b +/- sqrt(b^2 - 4ac)) / 2a

where a = 2, b = 8, and c = -9

So we have:

x = (-8 +/- sqrt(8^2 - 42-9)) / 2*2

x = (-8 +/- sqrt(64 + 72)) / 4

x = (-8 +/- sqrt(136)) / 4

x = (-8 +/- 4*sqrt(17)) / 4

x = (-2 +/- sqrt(17))

So the solutions for x are x = -2 + sqrt(17) and x = -2 - sqrt(17)

The solution for x is x = -2 + sqrt(17) and x = -2 - sqrt(17) will give the brainliest.

To learn more about quadratic equation, Visit

https://brainly.com/question/1214333

#SPJ1

The vertical scales for each type of vehicle are:

The rationale is to choose a vertical scale that represents the relative frequencies, or the proportion of each type of vehicle sold compared to the total number of vehicles sold. The calculation for each type of vehicle is as follows:

Here, the total number of vehicles sold (150) is calculated by adding up the sales for each type of vehicle. The relative frequency for each type of vehicle is then calculated by dividing the sales for that type of vehicle by the total number of vehicles sold.

This question should be provided as:

A car dealer is deciding what kind of vehicles he should order from the factory. he looks at his sales report for the preceding period. choose the vertical scale so that the relative frequencies are represented:

Learn more about vertical axes here: brainly.com/question/11485924

#SPJ4

Answer: -4(3y+4)

Step-by-step explanation:

First I found the Great common divisor (-4) and took that number and divided -12y and -16 with it getting 3y and 4 and then I set it up as if I was trying to get -12y and -16 so the best way to do that is to use the distributive property so I put 3y and 4 in parentheses like this (3y+4) then I added the -4 on to get the answer of -4(3y+4)

[tex]\huge\text{Hey there!}[/tex]

[tex]\mathsf{-12y - 16}[/tex]

[tex]\large\text{Let us look for the GCF for each of your numbers because it can}\\\large\text{make this equation somewhat easier to solve.}[/tex]

[tex]\mathsf{-12x \rightarrow -1, -2, -3, -4, -6, -12, \ \& \ -x}\\\\\mathsf{-16 \rightarrow -1, -2, -4, -8, \& -16}\\\\\large\text{Thus, your GCF for both of your numbers is: \boxed{- 4 }}\large\checkmark[/tex]

[tex]\large\text{So, let us put }\rm{-4}\large\text{ in front of your parentheses because we had to factor}\\\large\text{out the common like term they shared together.}[/tex]

[tex]\large\text{Now simplify it furthermore}[/tex]

[tex]\huge\text{This leaves your answer as:}[/tex]

[tex]\huge\boxed{\mathsf{-4(3y + 4)}}\huge\checkmark[/tex]

[tex]\huge\text{Good luck on your assignment \& enjoy your day!}[/tex]

To create a dot plot, we have to first choose an appropriate scale for the given number line, and then mark a dot over the given numbers.

Data points are represented as dots on a graph with an x- and y-axis in a dot plot, sometimes referred to as a strip plot or dot chart, which is a straightforward type of data visualization. These kinds of graphs are employed to visually represent particular data patterns or groups.

To create a dot plot, we have to first choose an appropriate scale for the given number line, and then mark a dot over the given numbers.

For the first question:

Scale on the number line from the first tick, 310 to 335.

For the second question:

Scale on the number line from the first tick, 18 to 31.

Learn more about dot plot here:

https://brainly.com/question/22746300

#SPJ1

A discontinuity the left and right limits still need to exist but are different.

Since bounded, growing sequences of numbers have limits, a non-decreasing function can only have leap discontinuities, which means that at

Every leap indicates that one interval is missing from the function's range, and these intervals are all disconnected (since the function is non-decreasing, the skipped intervals march up the y-axis).

Since there are only a finite number of discontinuous intervals, there can only be a finite number of discontinuity sites (to see this last bit, just pick a rational number in each interval).

Know more about discontinuity

https://brainly.com/question/9837678

#SPJ4

At the same rate, a machine take 44 hours until the drill reaches its final depth of −132 feet.

Any relationship that is always in the same ratio and quantity which vary directly with each other is called the proportional.

We have to given that;

A machine that drills holes for wells drilled to a depth of−72 feet in one day (24 hours).

Now, Let a machine drill holes reaches its final depth of −132 feet in x hours.

Hence, By definition of proportion, we get;

⇒ 72 / 24 = 132 / x

⇒ x = 132 × 24 / 72

⇒ x = 3,168 / 72

⇒ x = 44 hours

Thus, It take 44 hours to reaches its final depth of −132 feet.

Learn more about the proportion visit:

https://brainly.com/question/1496357

#SPJ1

There were 64 students who had taken a mathematics course. Of those 64, 28 had also taken a business course, and 26 had also taken a computer science course. This leaves 10 students who had taken only a mathematics course.

To calculate this, we start by subtracting the number of students who had taken all three courses (14) from the total number of students who had taken a mathematics course (64).

Then we subtract the number of students who had taken both a mathematics and a business course (28) and the number of students who had taken both a mathematics and a computer science course (26) from the result. This gives us 10 students who had taken only a mathematics course.

To know more about mathematics here

https://brainly.com/question/27235369

#SPJ4

The distance between the xy, yz, and xz planes are 5, 3, and 7.

Multivariable Calculus

This question relates to multivariable calculus.

a) Distance of point (x, y, z) from the XY-plane

The |z co-ordinate of the point| = |z|

distance of the point (3, 7, -5) from xy plane

|-5|=5

b) Distance of point (x, y, z) from yz plane

The |x coordinate of the point| = |x|

Therefore, the distance of the point (3, 7, -5) from yz plane is

|3|=3

c) Distance of point (x, y, z) from xz plane

The |y coordinate of the point| = |y|.

The distance of the point (3, 7 -5) from the xz-plane is

|7|=7

d) Distance of point (x, y, z) from the x-axis

The distance of the points from the x-axis is

[tex]x^{2} =y^{2} +z^{2} \\\\x=\sqrt{y^{2} +z^{2} } \\\\x=\sqrt{7^{2}+(-5)^{2} } \\\\x=\sqrt{74}[/tex]

e) Distance of point (x, y, z) from the y-axis

[tex]y=\sqrt{x^{2} +z^{2} } \\\\y=\sqrt{3^{2}+(-5)^{2} } \\\\y=\sqrt{34}[/tex]

f) Distance of point (x, y, z) from the z-axis

[tex]z=\sqrt{x^{2} +y^{2} } \\\\z=\sqrt{3^{2}+7^{2} } \\\\z=\sqrt{58}[/tex]

From the calculations above,

To know more about the distance of a point:

https://brainly.com/question/14407559

#SPJ4

Answer:

0.8

Step-by-step explanation:

.40 / 100x200