The complete question is;
The gravitational force between two objects is ______ proportional to the products of the masses and _______ proportional to the square of the distance between them.
Answer:
First dash is directly
Second dash is inversely
Explanation:
From Newton's law of gravitation the gravitational force is given by the equation;
F = GMm/r²
Where:
F is gravitational force
M and m are two masses representing the two objects
r is the distance between them
G = universal gravitational constant
Thus, if we are to write it in proportion format, we will have;
F ∝ Mm/r²
From this proportion relationship, we can see that the Gravitational force is directly proportional to the products of the two masses and inversely proportional to the square of the distance between them.
Answer:
DirectlyInverselyExplanation:
The gravitational force between two objects is directly proportional to the products of the masses and inversely proportional to the square of the distance between them.
A 1.0 kg ball has a potential energy of 10 J and falls to the ground. What is the velocity right before it hits the ground?
a)20 m/s
b)10 m/s
c)4.5 m/s
d)15 m/s
Answer:
10m/s
Explanation:
when it comes to graphs I am no genius lol
Answer:
Option B
Explanation:
Displacement = Area under the velocity-time graph
So to find the displacement of a particle from 7 to 8 seconds we take the triangle and calculate its area.
[tex]Area\ of\ a\ right\ angled\ triangle = \frac{1}{2}*(base)*(height) \\\\Area\ of\ a\ right\ angled\ triangle = \frac{1}{2}*(1)*(3) \\\\Area\ of\ a\ right\ angled\ triangle = 1.5[/tex]
So the displacement is 1.5 meters
I have an uploaded image so you can understand it better hope it helps
A car of mass 1000 kg travelling at a velocity of 25 m/s collides with another car of mass 1500kg which is at rest. The two cars stick and move off together. What is the velocity of the two cars after the collision?
Answer:
The velocity of the two cars is 10 m/s after the collision.
Explanation:
Law Of Conservation Of Linear Momentum
The total momentum of a system of bodies is conserved unless an external force is applied to it. The formula for the momentum of a body with mass m and velocity v is
P=m.v
If we have a system of bodies, then the total momentum is the sum of them all
[tex]P=m_1v_1+m_2v_2+...+m_nv_n[/tex]
If some collision occurs, the velocities change to v' and the final momentum is:
[tex]P'=m_1v'_1+m_2v'_2+...+m_nv'_n[/tex]
In a system of two masses, the law of conservation of linear momentum takes the form:
[tex]m_1v_1+m_2v_2=m_1v'_1+m_2v'_2[/tex]
If both masses stick together after the collision at a common speed v', then:
[tex]m_1v_1+m_2v_2=(m_1+m_2)v'[/tex]
The car of mass m1=1000 Kg travels at v1=25 m/s and collides with another car of m2=1500 Kg which is at rest (v2=0).
Knowing both cars stick and move together after the collision, their velocity is found solving for v':
[tex]\displaystyle v'=\frac{m_1v_1+m_2v_2}{m_1+m_2}[/tex]
[tex]\displaystyle v'=\frac{1000*25+1500*0}{1000+1500}[/tex]
[tex]\displaystyle v'=\frac{25000}{2500}[/tex]
v' = 10 m/s
The velocity of the two cars is 10 m/s after the collision.
Please find attached photograph for your answer.
which one?? please someone quick!
Answer:
i think its second law of motion.
Explanation:
Answer:
it’s the second law
Explanation:
Making and disposing of synthetic materials affects the amount of natural resources that are available. It also can harm the environment. These problems may not affect us in our lifetime. Who will these problems affect?
Answer:
What I put- This will affect animals, the earth, and could affect future generations. Plastic also gets into the oceans causing sea creaters die by eating it.
Sample Answer- Problems that arise from the unavailability of natural resources and from environmental hazards will affect the generations that follow us.
Explanation:
Answer:
This will affect animals, the earth, and could affect future generations. Plastic also gets into the oceans causing sea creaters die by eating it.
Explanation:
if the volume of a cube is 100cm3. what's the measurement of one of its length
Answer:
100 cm
Explanation:
Answer:
4.64
Explanation:
The cube root of 100 is 4.64.
A 615.00 kg race car is uniformly traveling around a circular race track. It takes the race car 20.00 seconds to do one lap around the 80.00 m radius circular track. What is the frequency of the race car's circular motion?
Answer:
The value is [tex]f = 0.05 \ Hz[/tex]
Explanation:
From the question we are told that
The mass of the car is [tex]m = 615 \ kg[/tex]
The period of the circular motion is [tex]T = 20 \ s[/tex]
The radius is [tex]r = 80 \ m/s[/tex]
Generally the frequency of the circular motion is
[tex]f = \frac{1}{T }[/tex]
=> [tex]f = \frac{1}{ 20 }[/tex]
=> [tex]f = 0.05 \ Hz[/tex]
A boat travels at 15 m/s in a direction 45° east of north for an hour. The boat then turns and travels at 18 m/s in a direction 5° north of east for an hour.
Answer:
first one 31
second one 23
Explanation:
on edge ;))
An object in motion will remain in motion and an object at rest will remain at rest until a greater force interrupts it. Explain this concept.
Answer:
A object, lets say a cup. This cup will never, ever move unless something or someone disturbs it. If something touches or hits this cup the cup will move. But, until the cup gets touched, nothing will EVER make it move.
Explanation:
I hope this helps!!
If a lever has a mechanical advantage of 5 and 50 N of force is used to lift a rock, what is the weight of the rock?
How much power will it take to move a 10 kg mass at an acceleration of 2 m/s² a distance of 10 meters in 5 seconds?
Answer:
100 Watts
Explanation:
These equations are needed to work out the answer:
power= work done/ time takenwork done= force* distanceforce= mass* accelerationforce: 10 kg* 2m/s= 20
work done: 20* 10m=200
power: 200/2=100
How much power is used if a force of 35 newtons is used to push a box a distance of 10 meters in 5 seconds?w=350j
Answer:
How much power is used if 350J of work is done when pushing a box for 5 seconds.
Explanation:
the answer is 70watts
How much heat in kcal is required to change 0.5 kg of ice, originally at - 10 0 * C into steam at 110 C?Constants needed in the problemLatent heat of fusion=79.7 kcal/kg Specific heat of ice=0.5 kcal/kg/K ; Latent heat of vaporization ation = 539 kcal/kg ; Specific heat of water 1.0 kcal/kg/K Specific heat of ieam=0.480 kcal/kg
Answer:
Q = 364.25 kcal
Explanation:
In this question, we will have to calculate the heat absorptions for different steps of temperature rise and phase change. And then we will ad them to calculate total heat absorbed.
1. RISE IN TEMPERATURE OF ICE:
First, the temperature of ice will be increased from - 10°C to 0 °C. Heat absorbed during this process will be given as:
Q₁ = mC₁ΔT₁
where,
Q₁ = Heat absorbed while increasing temperature of ice = ?
m = mass of ice = 0.5 kg
C₁ = specific heat of ice = 0.5 kcal/kg k
ΔT₁ = change in temperature of ice = 0 - (-10) = 10 k
Therefore,
Q₁ = (0.5 kg)(0.5 kcal/kg.k)(10)
Q₁ = 2.5 kcal
2. MELTING OF ICE:
Now, the melting of ice will occur at 0°C and the heat absorbed during this process will be:
Q₂ = m(Latent Heat of Fusion of Ice)
where,
Q₂ = heat Absorbed during melting of ice = ?
Therefore,
Q₂ = (0.5 kg)(79.7 kcal/kg)
Q₂ = 39.85 kcal
3. RISE IN TEMPERATURE OF WATER:
Now, the temperature of water will be increased from 0°C to 100 °C. Heat absorbed during this process will be given as:
Q₃ = mC₃ΔT₃
where,
Q₃ = Heat absorbed while increasing temperature of water = ?
m = mass of water = 0.5 kg
C₃ = specific heat of water = 1 kcal/kg k
ΔT₃ = change in temperature of ice = 100 - 0 = 100 k
Therefore,
Q₃ = (0.5 kg)(1 kcal/kg.k)(100 k)
Q₃ = 50 kcal
4. VAPORIZATION OF WATER:
Now, the vaporization of water will occur at 100°C and the heat absorbed during this process will be:
Q₄ = m(Latent Heat of Vaporization of Water)
where,
Q₄ = heat Absorbed during vaporization of water = ?
Therefore,
Q₄ = (0.5 kg)(539 kcal/kg)
Q₄ = 269.5 kcal
5. RISE IN TEMPERATURE OF STEAM:
Now, the temperature of steam will be increased from 100°C to 110 °C. Heat absorbed during this process will be given as:
Q₅ = mC₅ΔT₅
where,
Q₅ = Heat absorbed while increasing temperature of steam = ?
m = mass of steam = 0.5 kg
C₅ = specific heat of steam = 0.48 kcal/kg k
ΔT₅ = change in temperature of ice = 110 - 100 = 10 k
Therefore,
Q₅ = (0.5 kg)(0.48 kcal/kg.k)(10 k)
Q₅ = 2.4 kcal
Hence, the total heat absorbed to change 0.5 kg of ice at - 10°C into steam at 110°C will be:
Q = Q₁ + Q₂ + Q₃ + Q₄ + Q₅
Q = 2.5 kcal + 39.85 kcal + 50 kcal + 269.5 kcal + 2.4 kcal
Q = 364.25 kcal
HIII DROPPING COINS YALL
Answer:
tysm
Explanation:
Answer:
OMG THANK U SO MUCH I NEEDED THEMMMMM
Earthquakes
Shaking of the ground
Seismographs
Scientific method
Answer:
C. seismographs
Explanation:
Theirs another name for seismographs but c is correct
a toy car is wound up and released on the floor. it accelerates at a rate of 0.4 m/s/s . the mass of the care is 3kg. what is the force that the cars wheels exert on the floor.
Answer:
1.2N
Explanation:
f=m×a
m=3kg
a=.4m/s/s
3×.4=1.2
kg×m/s/s = N
Charles, the 75 kg trampoline artist, lands on a trampoline with a speed of 9.0 m/s.
If the trampoline behaves like a spring with a spring constant of 52,000 N/m, what maximum distance will Charles push down the trampoline before bouncing back up? (Hint: at maximum compression, Charles is not moving.)
Answer:
The maximum distance Charles will push down the trampoline ≈ 0.342 m
Explanation:
The given parameters are;
The mass of the trampoline artist, m = 75 kg
The speed with which the trampoline artist lands, v = 9.0 m/s
The value of the spring constant of the trampoline, k = 52,000 N/m
Let x represents the maximum distance Charles will push down the trampoline
Therefore, we have;
Kinetic energy = 1/2·m·v²
The kinetic energy with which the trampoline artist lands = 1/2 × 75 × 9.0² = 3037.5
The kinetic energy with which the trampoline artist lands = 3037.5 J
The potential energy stored in a spring = 1/2·k·x² = The kinetic energy with which the trampoline artist lands
∴ 1/2 × 52,000 × x² = 3037.5
∴ x = √(3037.5/(1/2 × 52,000)) ≈ 0.342
The maximum distance Charles will push down the trampoline = x ≈ 0.342 m
what makes up a atom
Answer:
They're typically made up of three main parts: protons, neutrons and electrons. Think of the protons and neutrons as together forming a “sun”, or nucleus, at the centre of the system. The electrons orbit this nucleus, like planets. If atoms are impossibly small, these subatomic particles are even more so.
Explanation:
hope i helped.
Answer:
Atoms consist of a nucleus made of protons and neutrons orbited by electrons. ... We now know that atoms are made up of three particles: protons, neutrons and electrons — which are composed of even smaller particles, such as quarks.
Explanation:
What type of energy is stored in a pendulum at the top of its arc?
Answer:
potential
Explanation:At this point the energy is stored in a form called potential energy. This means that the system has the potential to do work or to become active thanks here to the weight's position high above the lowest point of its swing.
A red 120 kg bumper car moving at 4 m/s collides with a green 100 kg bumper car moving at 3 m/s. The red bumper car bounces off at 2 m/s. What is the green car's final velocity?
Integrated science please help ASAP!...
Answer:
SewageAgricultural pollutionOilRadioactive substanceRiver dumpingMarine dumpingLittering trash Industrial wasteMining activitiesChemical fertilizersExplanation:
I hope this helps
How do you compare the mass of proton, neutron, and
electron?
Answer:Explanation:
Protons and neutrons have very similar mass, while electrons are far lighter, approximately 11800 times the mass. Protons are positively charged, neutrons have no electric charge, electrons are negatively charged. The size of the charges is the same, the sign is opposite.
Where are alkaline earth metals found on the periodic table?
Group 1
Group 2
Groups 3–12
Group 17
Answer:
B
Explanation:
Answer:
B
Explanation:
I had a feeling
Suppose you are in a moving car and the motor stops running. You step on the brakes and slow the car to half speed. If you release your foot from the brakes, will the car speed up a bit, or will it continue at half speed and slow due to friction?
Answer:
See the answer below
Explanation:
If you step on the brake of a car while driving, the frictional force between the tires of the car and the surface of the road increases in opposition to the motion of the car. Consequently, the car slows down.
If you release your foot from the brake pedal when the car is still at half speed, the frictional force reduces and the car speeds up a bit even without pressing the throttle. Eventually, the frictional force will slow down and stop the car if the throttle is not pressed.
Arrange Kepler's laws in order: a. The ratio of the squares of the periods of any two planets revolving around the sun is equal to the ratio of the cubes of their average distance from the sun. b. The path of each planet around the sun is an ellipse with the sun at one focus. c. As a planet moves in its orbit, a line from the sun to the planet sweeps out equal areas in equal times. a. 3, 2, 1 b. 2, 3, 1 c. 3, 1, 2 d. 1, 2, 3
Answer:
2,3,1
Explanation:
There are 3 laws of Kepler.
First law = The path of each planet around the sun is an ellipse with the sun at one focus.
Second law = As a planet moves in its orbit, a line from the sun to the planet sweeps out equal areas in equal times.
Third law = The ratio of the squares of the periods of any two planets revolving around the sun is equal to the ratio of the cubes of their average distance from the sun.
Hence, the correct order for Kepler's law is: 2,3,1
Please help which one !!
Answer:
4th one
Explanation:
4) Choose Yes or No next to the descriptions to indicate whether or not an object
is accelerating,
A car slows down,
A car stays the same speed,
A car goes faster,
Luke walks at a constant speed of 4 mph,
Luke walks north at a constant speed of 4 mph,
Luke walks north at a constant speed of 4 mph, turns right, and walks
Type here to search
A train travels at a speed of 30mph and travelled a distance of 240 miles. How long did it take the train to complete its journey? Must show your work
Answer:
8
Explanation:
240 divided by 30 = 8
Los muelles de un remolque están calibrados para soportar su peso, cuando se carga el remolque con 2100 kg, la fuerza ejercida es de 20580 N comprime los muelles de un remolque 5,5 cm a)Longitud que desciende el remolque si se carga con 28000 N b)Si ha descendido 4,2 cm la carga
Answer:
a) El remolque desciende 7.4 cm
b) La carga debe ser de 15715.6 N ó 1603.6 kg
Explanation:
Para los cálculos que involucren muelles, se aplica la Ley de Hooke, la cual relaciona el efecto de una Fuerza y el cambio de longitud que esta ejerce, en un resorte de elasticidad dada.
Escrito en fórmula:
[tex]F=-k \cdot \Delta L[/tex]
Donde:
F es la fuerza ejercida
k es la constante elástica del muelle
ΔL es la variación de longitud del muelle
El problema indica que al cargar 2100 kg se ejerce una fuerza de 20580 N
Esto se corrobora con la 2da ley de Newton y asumiendo una aceleración de gravedad de 9.8 [tex]\frac{m}{s^{2} }[/tex]
[tex]F_{1} =m \cdot a\\F_{1}=2100kg \cdot 9.8\frac{m}{s^2}\\F_{1}=20580N[/tex]
Esta fuerza comprime o reduce la longitud del muelle en 5.5 cm. Usando estos datos en la Ley de Hooke, podemos obtener la constante elástica k:
[tex]F=-k \cdot \Delta L\\20580N=-k \cdot (-0.055m)\\\\k=\frac{20580N}{0.055m}\\k= 374181\frac{N}{m}[/tex]
Ahora ya tenemos los datos para resolver las preguntas:
a) Longitud que desciende el remolque si se carga con 28000 NAplicando directamente la formula de la Ley de Hooke:
[tex]F=-k \cdot \Delta L\\\Delta L=\frac{F}{-k} \\\Delta L= \frac{28000N}{-374181\frac{N}{m}} \\\Delta L=-0.074 m = -7.4cm[/tex]
b) Si ha descendido 4,2 cm la cargaEn este caso debemos calcular la fuerza necesaria que haga descender el remolque 4.2cm. Nuevamente utilizando la Ley de Hooke con estos nuevos datos:
[tex]F=-k \cdot \Delta L\\F=-374181\frac{N}{m} \cdot (-0.042m)\\F=15715.6N[/tex]
Si queremos saber la carga en kilogramos:
[tex]F = m \cdot a\\m = \frac{F}{a} \\m = \frac{15715.6N}{9.8\frac{m}{s^2} }\\m= 1603.6 kg[/tex]
why is thouching the live wire of an appliane when it is connecfed to the mains dangerous
Answer: The live wire is the most dangerous one, since it is at 230 V. it should never touch the earth wire (unless the insulation is between them, of course!), because this would make a complete circuit from your mains supply to the ground (earth). A shock or fire would be highly likely.
Explanation: