The following questions refer to Explorer 35, a recon spacecraft launched from Kennedy Space Center at the height of the Space Race in the late 1960's. The plot below shows the position of Explorer 35 at fifteen minute intervals as it orbited the Moon once. The lines on this plot indicate lunar radii (1738 km), so the Moon would have a diameter of two squares. Where is the Moon within this orbit?
Hint: The dots show where the probe was every 15 minutes of its orbit. When the probe is moving quickest, are the dots spaced closer together or further apart?
a. Inside the top-left part of the orbit
b. Inside the bottom-right part of the orbit
c. In the center of the orbit
d. It's not possible to tell

Class management is crucial to help students understand complex topics such as electromagnetic induction.

One problem that students may encounter is calculating the voltage of a generator with specific parameters. In problem 5, students are given the peak voltage of a generator with 500 turns and a diameter of 7.38cm rotating in a 0.351t field.

By applying the formula V = NABw sin(theta), where V is the voltage, N is the number of turns, A is the area, B is the magnetic field, w is the angular velocity, and theta is the angle between the normal and the magnetic field, students can solve for the voltage.

However, to explain the process, students must understand the formula and how to apply it correctly.

Additionally, they must have a grasp of the concept of electromagnetic induction and how it relates to generators. Therefore, effective class management can help students master these concepts and succeed in their studies.

To know more about electromagnetic induction click on below link:

https://brainly.com/question/26334813#

#SPJ11

The sphere can roll up a 30 degree ramp for a distance of 0.408 meters before coming to a stop.

To solve this problem, we can use the principle of conservation of energy. Initially, the sphere has kinetic energy due to its motion, and as it rolls up the ramp, this kinetic energy is converted into gravitational potential energy.

The total energy of the system (sphere plus Earth) is conserved, so we can equate the initial kinetic energy to the final potential energy at the point where the sphere comes to rest:
1/2 mv^2 = mgh

where m is the mass of the sphere, v is its initial speed, h is the height it reaches on the ramp (measured vertically), and g is the acceleration due to gravity. We can solve for h:
h = (1/2 v^2)/g = (1/2 (2.0 ms^-1)^2)/9.81 ms^-2 = 0.204 m

Now we need to convert this height into a horizontal distance. The ramp makes an angle of 30 degrees with the horizontal, so we can use trigonometry:

distance = h / sin(theta) = 0.204 m / sin(30 deg) = 0.408 m

Therefore, the sphere can roll up a 30 degree ramp for a distance of 0.408 meters before coming to a stop.

To know more about principle of conservation of energy:

https://brainly.com/question/31551042

#SPJ11

The aspect of training that requires additional emphasis when the aim is to improve change of direction ability is reactive strength.

Reactive strength refers to the ability to rapidly change direction, accelerate, and decelerate in response to external forces, such as an opponent's movements. By focusing on reactive strength training, athletes can improve their ability to change direction quickly and efficiently, which can enhance their overall performance on the field or court. While strength, eccentric strength, and rate of force development are also important aspects of training, reactive strength is particularly crucial for improving change of direction ability. This is because reactive strength focuses on the ability to quickly switch from eccentric to concentric contractions, allowing for better change of direction performance.

learn more about accelerate Refer: https://brainly.com/question/24262534

#SPJ11

The potential solutions to Fermi's Paradox that are considered by scientists include:

- There is an existing galactic civilization that is far more advanced than we are.
- Civilizations are common, but no one has colonized the galaxy.
- We are alone.

The options "there is no paradox, because UFO evidence already proves that aliens exist" are not considered as potential solutions by scientists as there is no concrete evidence to support this claim.

he Fermi paradox is the discrepancy between the lack of conclusive evidence of advanced extraterrestrial life and the apparently high a priori likelihood of its existence. As a 2015 article put it, "If life is so easy, someone from somewhere must have come calling by now. Fermi was not the first to ask the question. An earlier implicit mention was by Konstantin Tsiolkovsky in an unpublished manuscript from 1933.

He noted "people deny the presence of intelligent beings on the planets of the universe" because "if such beings exist they would have visited Earth, and  if such civilizations existed then they would have given us some sign of their existence." This was not a paradox for others, who took this to imply the absence of extraterrestrial life. But it was one for him, since he believed in extraterrestrial life and the possibility of space travel. Therefore, he proposed what is now known as the zoo hypothesis and speculated that mankind is not yet ready for higher beings to contact us. In turn, Tsiolkovsky himself was not the first to discover the paradox, as shown by his reference to other people's reasons for not accepting the premise that extraterrestrial civilizations exist.

TO KNOW MORE  ABOUT Fermi's Paradox CLICK THIS LINK-

brainly.com/question/8776985

#SPJ11

The terminal velocity of the ball bearing is 13.04 cm/s.

Terminal velocity can be defined as the highest velocity that a falling object can attain when it is no longer accelerating due to the opposing force of air resistance.

To determine the terminal velocity from the given graph, we must draw a right triangle on the curve and take the change in the vertical direction, then divide it with the change on the horizontal direction, which is equal to the slope or terminal velocity of the curve.

Consider the following points; (5.6 s, 30 cm) and (7.9 s, 60 cm)

Slope = termina velocity = ( 60 cm - 30 cm ) / ( 7.9 s - 5.6 s)

Slope = termina velocity =  13.04 cm/s

Learn more about terminal velocity here: https://brainly.com/question/30466634

#SPJ1

When metallic substances lose electrons, they are trying to achieve the electron configuration of D.

This is because the noble gases have completed outer electron shells, making them stable and unreactive. By losing electrons, metals can achieve a similar electron configuration and become more stable. The previous noble gas. When metallic substances lose electrons, they are trying to achieve the electron configuration of the previous noble gas. This is because noble gases have a stable electron configuration with full outer energy levels, making them less reactive. Metals lose electrons to attain this stable state.

To learn more about electrons visit;

https://brainly.com/question/1255220

#SPJ11

A sample of helium undergoes a constant pressure heating from 283 K to 393 K and does 40 J of work, calculate the mass of helium. Answer: 0.176 g.

The work done by the gas during the interaction is given as 40 J. Since the strain is consistent, we can involve the equation for work done at steady tension:

W = PΔV

where W is the work done, P is the tension, and ΔV is the adjustment of volume. Since the gas acts as an ideal gas, we can utilize the best gas regulation to work out the adjustment of volume:

PV = nRT

where P is the strain, V is the volume, n is the quantity of moles, R is the widespread gas steady, and T is the temperature.

Adjusting this condition, we get:

V = (nRT)/P

Consequently, the adjustment of volume during the interaction is:

ΔV = V2 - V1 = [(nR/P)T2] - [(nR/P)T1] = (nR/P)(T2 - T1)

Subbing the given qualities, we get:

ΔV = (nR/P)(T2 - T1) = (1 mol x 8.31451 J/mol·K x (393 K - 283 K))/(P) = 0.988 L·atm/mol

Since the strain is steady, we can utilize the thickness recipe:

ρ = m/V

where ρ is the thickness, m is the mass, and V is the volume.

Revising this condition, we get:

m = ρV

Subbing the given qualities, we get:

m = (ρ x ΔV) = (0.1785 g/L x 0.988 L) = 0.176 g

In this way, the mass of the helium test is 0.176 g.

To learn more about work done by the gas, refer:

https://brainly.com/question/31636775

#SPJ4

The equation of motion is x(t) = 3 sin(2t)

An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

To find the equation of motion of the mass-spring system, we need to use the spring constant and the mass to calculate the angular frequency of the system. Then, we can use the initial conditions to write the equation of motion.

The spring constant, k, can be found using Hooke's law:

F = kx

where F is the force applied to the spring, x is the displacement from the equilibrium position, and k is the spring constant.

In this case, we know that a force of 540 N stretches the spring 3 meters, so:

540 N = k * 3 m

Solving for k, we get:

k = 180 N/m

The angular frequency, ω, of the system can be found using the formula:

ω = √(k/m)

where m is the mass attached to the spring. In this case, m = 45 kg, so:

ω = √(180 N/m / 45 kg) = √(4 N/kg) = 2 rad/s

The equation of motion for the mass-spring system is:

x(t) = A cos(ωt) + B sin(ωt)

where A and B are constants determined by the initial conditions. Since the mass is released from the equilibrium position with an upward velocity of 6 m/s, we know that:

x(0) = 0

x'(0) = 6 m/s

Taking the derivative of the equation of motion, we get:

x'(t) = -Aω sin(ωt) + Bω cos(ωt)

Using the initial conditions, we can solve for A and B:

x(0) = A cos(0) + B sin(0) = A

x'(0) = -Aω sin(0) + Bω cos(0) = Bω

So, A = 0 and B = 6 m/s / ω = 3 m.

The final equation of motion is:

x(t) = 3 sin(2t)

Learn more about force on:

https://brainly.com/question/12785175

#SPJ11

The Burger's vector is a vector representing the magnitude and direction of the lattice distortion caused by a dislocation in a crystal. The slip plane(s) are the planes along which dislocations move, typically those with the highest atomic density.

The slip direction(s) are the directions along which atoms move during dislocation motion. The slip system is a combination of the slip plane and slip direction, and it describes the specific way in which dislocations move within a crystal.

In a crystal, dislocations cause lattice distortions, and the Burger's vector quantifies this distortion.

The slip plane(s) are important because they determine the ease of dislocation movement, affecting the crystal's mechanical properties. The slip direction(s) are the specific directions in which atoms rearrange during deformation. The slip system, as a combination of slip plane and slip direction, is essential for understanding the overall deformation behavior of a crystal.

To know more about  magnitude and direction visit:

brainly.com/question/9135306

#SPJ11

For grounded systems, electrical equipment and other electrically conductive materials likely to become energized should be installed in a manner that creates a low-impedance path from any point on the wiring system where a ground fault may occur to the electrical supply source.

The grounding continuity means that all electrical device and conductive material must be installed in a way that ensures a continuous and low-resistance path to the ground. This is important because it helps to prevent electrical shocks and fires in the event of a ground fault. Any break or interruption in the grounding continuity could create a hazardous situation, so it's essential to make sure that all connections are secure and properly grounded. This helps ensure safety and proper functioning of the system.

Learn more about electrical device: https://brainly.com/question/28919293

#SPJ11

The correct answer is linear momentum is converted to angular momentum. When the skater hops onto one end of the board, they introduce a force that causes the board to move and rotate.

This force changes the linear momentum of the board and the skater, which is then converted into angular momentum as the board starts to rotate.

In this situation, the correct answer is: e. Linear momentum and angular momentum are both conserved.

The skater and the board together can be treated as an isolated system since there is no external force acting on them due to the frictionless ice.
In an isolated system, linear momentum and angular momentum are conserved separately.
When the skater hops onto the board, their linear momentum is transferred to the board, causing it to slide. This means the total linear momentum before and after the hop remains the same.
Simultaneously, as the skater hops onto one end of the board, they apply a torque to the board, causing it to rotate. Since there is no external torque acting on the system, the total angular momentum is also conserved.

Therefore, option a is the correct answer. The other options are not applicable in this situation as there is no conservation of kinetic energy or translational kinetic energy. However, angular momentum is conserved in this situation.

Learn more about linear momentum

brainly.com/question/31138302

#SPJ11

Out of the given options, Mintaka 09V is brighter in the visual filter than it is in blue. The other stars mentioned, including Barnard's Star, M4V, Zavijava F9V, do not have a significant difference in brightness between visual and blue filters.

Barnard's Star is among the most studied red dwarfs because of its proximity and favorable location for observation near the celestial equator. Historically, research on Barnard's Star has focused on measuring its stellar characteristics, its astrometry, and also refining the limits of possible extrasolar planets.

Zavijava is a yellowish star of spectral and luminosity type F9 V (Morgan and Keenan, 1973: page 33) but also has been classed as white as F8 (Smith and Lambert, 1983), possibly from the Henry Draper Catalogue.

to know more about barnard's star m4v mintaka 09v or zavijava f9 v click this link -

brainly.com/question/15999058?

#SPJ11

When the inverter's DC safety switch is in the off position, there will be no output voltage from the power optimizer.

The power optimizer relies on the inverter to convert the DC power into AC power, and without the inverter's connection, the power optimizer will not function. Therefore, the output voltage of the power optimizer will be zero in this scenario. The output voltage of a power optimizer when the inverter's DC safety switch is in the off position will be zero volts. This is because the DC safety switch disconnects the optimizer from the inverter, stopping the flow of electricity and ensuring no voltage output.

To learn more about voltage visit;

https://brainly.com/question/29445057

#SPJ11

To find the electric field intensity between two plates, you can use the formula:

Electric field intensity (E) = Voltage (V) / Distance (d)

Given the information, we have:
Voltage (V) = 58 V
Distance (d) = 0.23 m

Now, substitute the values into the formula:

E = 58 V / 0.23 m
E ≈ 252.17 V/m

Since 1 V/m is equivalent to 1 N/C (Newton per Coulomb), the electric field intensity between the plates is approximately 252.17 N/C.

Learn more about electric field here:

https://brainly.com/question/15800304

#SPJ11

The ratio of the final to the initial energy stored in the capacitor is 9. Therefore the correct option is option E.

The capacitor's initial energy is determined by:

U_i equals frac12 CV_i2

where $V_i$ is the starting voltage and C is the capacitance.

The final amount of energy kept in the capacitor is determined by:

U_f is equal to frac (1/C(V_i + V_f)/2)

where the ultimate voltage, in this example 6 V, is denoted by the symbol $V_f$.

The final energy to starting energy ratio is:

= Fracture U_f = Fracture U_i

= Fracture Fracture 1 2 C (V_i + V_f) 2 Fracture 1 2 CV_i

= Fracture (V_i + V_f) 2 V_i

= Fracture (3+6) 2 3 2 = 9

As a result, the capacitor's end energy to starting energy storage ratio is 9. Response: E) 9.

For such more question on capacitor:

https://brainly.com/question/21851402

#SPJ11

(a) The angular acceleration of the cylinder is 4.08 rad/s².

(b) The frictional force acting on the cylinder has a magnitude of 2.38 N and acts in the opposite direction of the cylinder's motion.

(a) The net torque on the cylinder is due to the tension force and the frictional force, which are in opposite directions. Using Newton's second law for rotational motion, we can write: net torque = I * angular acceleration, where I is the moment of inertia of the cylinder.

For a solid cylinder, I = 1/2 * m * r². Solving for angular acceleration, we get: angular acceleration = net torque / I. Since the tension force produces a torque of Tr and the frictional force produces a torque of -fr, the net torque is (T - f)r. Substituting values, we get: angular acceleration = (T - f)r / (1/2 * m * r²) = (2T - 2f) / m = 4.08 rad/s².

(b) The frictional force opposes the motion of the cylinder, so it acts in the opposite direction to the tension force. Using Newton's second law for translational motion, we can write: net force = ma, where a is the acceleration of the cylinder.

Since the cylinder is rolling without slipping, a = R * angular acceleration, where R is the radius of the cylinder. Solving for the frictional force, we get: f = (T - ma) = T - mR*angular acceleration = 2.38 N. The direction of the frictional force is opposite to the direction of motion, which is to the left.

For more questions like Force click the link below:

https://brainly.com/question/13191643

#SPJ11

The foci of the ellipse in the pond are approximately 30.2 feet apart. When a pebble is dropped at one focus, the resulting waves will converge at the other focus due to the unique property of ellipses.

The distance between the foci of an ellipse can be calculated using the formula:

c = sqrt(a^2 - b^2)

where "c" is the distance between the foci, "a" is half of the length of the major axis, and "b" is half of the length of the minor axis.

In this problem, the major axis of the pond is 68 feet, so a = 34 feet. The minor axis is 32 feet, so b = 16 feet. Substituting these values into the formula, we get:

c = sqrt(a^2 - b^2) = sqrt((34 feet)^2 - (16 feet)^2) ≈ 30.2 feet

to know more about foci of ellipse refer here:

https://brainly.com/question/30557306#

#SPJ11

The perihelion is the point in a planet's orbit when it is closest to the Sun, while the aphelion is the point in the orbit when it is farthest from the Sun. To calculate the perihelion and aphelion distances of Mercury and Mars from the Sun, we can use their respective eccentricities and average distances from the Sun.

For Mercury:

Average distance from the Sun = 0.387 AU

Eccentricity of Mercury's orbit = 0.206

The perihelion distance can be calculated by subtracting the product of the eccentricity and the average distance from the Sun from the average distance:

Perihelion distance = (1 - eccentricity) x average distance from the Sun

Perihelion distance of Mercury = (1 - 0.206) x 0.387 AU = 0.3075 AU

The aphelion distance can be calculated by adding the product of the eccentricity and the average distance from the Sun to the average distance:

Aphelion distance = (1 + eccentricity) x average distance from the Sun

Aphelion distance of Mercury = (1 + 0.206) x 0.387 AU = 0.4667 AU

Therefore, the perihelion distance of Mercury from the Sun is 0.3075 AU, and the aphelion distance is 0.4667 AU.

For Mars:

Average distance from the Sun = 1.524 AU

Eccentricity of Mars' orbit = 0.093

Perihelion distance of Mars = (1 - 0.093) x 1.524 AU = 1.3824 AU

Aphelion distance of Mars = (1 + 0.093) x 1.524 AU = 1.6656 AU

Therefore, the perihelion distance of Mars from the Sun is 1.3824 AU, and the aphelion distance is 1.6656 AU.

To know more about perihelion distance:

https://brainly.com/question/28587979

#SPJ11

The formula for energy consumed to calculate the energy consumed by the motor in 23 seconds:

To calculate the energy consumed by the motor in operating the centrifuge for 23 seconds, we need to use the formula:

Energy Consumed = Power x Time

Since we are assuming that there is no loss of energy, the power consumed by the motor will be equal to the kinetic energy of the rotating parts of the centrifuge. We can calculate this using the formula:

Kinetic Energy = (1/2) x Moment of Inertia x Angular Velocity^2

We don't have information about the moment of inertia or the angular velocity, but we do have the data from a single measurement, which gives us the frequency of rotation. We can use this frequency to calculate the angular velocity:

Angular Velocity = 2π x Frequency

Substituting this value in the kinetic energy formula, we get:

Kinetic Energy = (1/2) x Moment of Inertia x (2π x Frequency)^2

So, to find the energy consumed by the motor for 23 seconds while operating the centrifuge without any sample, follow these steps and use the provided formula.

Learn more about Angular Velocity

brainly.com/question/29557272

#SPJ11

The power dissipated in the cord is approximately 21.43 W.

To determine the power dissipated in the extension cord, we'll need to use the given information and follow these steps:

Step 1: Calculate the cross-sectional area (A) of one wire
A = (πd^2) / 4
A = (π(0.00129 m)^2) / 4 ≈ 1.308 x 10^-6 m^2

Step 2: Calculate the resistance (R) of one wire
R = (ρL) / A
R = (1.68 x 10^-8 Ω⋅m x 2.3 m) / (1.308 x 10^-6 m^2) ≈ 0.0296 Ω

Step 3: Calculate the total resistance (R_ total) of the two wires
R_ total = 2R (since both wires have the same resistance)
R_ total = 2 x 0.0296 Ω ≈ 0.0592 Ω

Step 4: Calculate the power dissipated (P)
P = I^2 x R_ total
P = (19.0 A)^2 x 0.0592 Ω ≈ 21.43 W

So, the power dissipated in the cord is approximately 21.43 W.

To know more about cross-sectional area:

https://brainly.com/question/13029309

#SPJ11

It is false to say that electronegativity is significant only when single atoms are gaining electrons to create anions and electron affinity is significant only when discussing covalent interactions.

Electronegativity is the propensity of an atom in a molecule to draw the shared pair of electrons towards itself.

False.

Electronegativity and electron affinity are both important concepts in a variety of chemical contexts and are not limited to the specific situations described in the statement.

Electronegativity is a measure of an atom's ability to attract electrons in a chemical bond, and it is important in many different types of chemical bonding, including ionic, covalent, and metallic bonding. It is used to predict the direction of electron flow in a bond and to determine the degree of polarization of a bond.

Similarly, electron affinity is a measure of the energy change that occurs when an atom gains an electron, and it is important in a variety of chemical reactions, including the formation of covalent bonds, ionic compounds, and other types of chemical species. It can be used to predict the reactivity of an atom or molecule in various chemical reactions.

Therefore, the statement that electronegativity is only important when considering single atoms gaining electrons to form anions, and electron affinity is only important when looking at covalent bonds, is not true.

Learn more about electronegativity on:

https://brainly.com/question/1163776

#SPJ11

Based on the graph, the frequency increases from 0 Hz to a peak at around 500 Hz and then decreases back to 0 Hz over the 4-second interval. This means that the sound source is moving towards you and then away from you.
Involving a graph that shows the frequency you hear during a 4-second interval while standing at x=0m. Based on the given options, the sound source can be described as follows:

The sound source (d) moves away from you until t = 2 s. It then reverses direction and moves toward you but doesn't reach you. This is because the frequency you hear changes during the 4-second interval, indicating a change in the position of the sound source relative to you.

Therefore, options (c) and (d) are the only possibilities. However, since the graph shows that the sound does not reach you, the correct answer is (c) - the sound source moves towards you but doesn't reach you, and then reverses direction at t=2s.

To know more about frequency:

https://brainly.com/question/30053506

#SPJ11

When the results of a study can be generalized to other subject populations, the study is said to have external validity. So, option c) is correct.

External validity refers to the extent to which the results of a study can be generalized to other populations, settings, and time periods. In other words, it measures how well the findings of a study can be applied to real-world situations beyond the specific sample used in the study.

It is important to note that external validity is not the same as statistical or internal validity. Statistical validity refers to the accuracy and reliability of the data and statistical analyses, while internal validity refers to the extent to which a study is free from systematic errors or biases.

External validity is crucial in research, as it ensures that the findings of a study are relevant and applicable to a wider range of populations and situations, thus increasing the generalizability and practicality of the study's results.

So, option c) is correct.

Learn more about validity:

https://brainly.com/question/26251731

#SPJ11

The moment of inertia equation can be derived by drawing an extended/free body diagram and applying Newton's second law for rotation, using variables such as radius, mass, angular velocity and acceleration, and physical constants.

The moment of inertia is a physical quantity that measures an object's resistance to rotational motion around a specific axis. It depends on the object's mass distribution and the axis of rotation. The moment of inertia is used in many areas of physics and engineering, including the design of rotating machinery and analysis of rotational dynamics.

To derive an algebraic equation for the moment of inertia of the disk/plate by using the applied torque and angular acceleration method, we first need to draw an extended/free-body diagram of the system. The diagram should include the disk/plate, hanging mass, pulley, and any other relevant components.

Next, we can use Newton's second law for rotation, which states that the sum of torques on an object is equal to its moment of inertia times its angular acceleration. We can apply this law to the disk/plate and solve for the moment of inertia.

The variables in our equation will be the radius of the pulley, the mass of the hanging mass, the angular velocities and angular acceleration of the system, and physical constants such as the acceleration due to gravity. It is important to keep track of the units of each variable and ensure they are consistent throughout the equation.

Therefore, By creating an extended/free body diagram, applying Newton's second rule of rotation, and using parameters like radius, mass, angular velocity, acceleration, and physical constants, one can get the moment of inertia equation.

To learn more about Newton's law of motion click:

brainly.com/question/29775827

#SPJ1

The angle of the first maximum for diffracted red light is larger than diffracted blue light. This is because the wavelength of red light is longer than that of blue light. According to the diffraction grating equation, the angle of diffraction is directly proportional to the wavelength of the light.

Therefore, since red light has a longer wavelength, it will diffract at a larger angle compared to blue light. This is also evident in the color spectrum, where red light is found at one end and blue light at the other.

As a result, the diffraction pattern produced by a diffraction grating will have the red light diffracting at a larger angle compared to the blue light.

Understanding this phenomenon is important in various fields, including optics, astronomy, and material science, where diffraction patterns are commonly used to study the properties of materials and light.

To know more about diffraction grating equation refer here:

https://brainly.com/question/29855408#

#SPJ11

The frictional force exerted by the board on the box is option B, 1/6 F0

The frictional force between the box and the board depends on the normal force and the coefficient of friction, both of which are determined by the properties of the surface they are in contact with. Since the surfaces are the same in both cases, the coefficient of friction will remain the same. However, the normal force will change because the gravitational force acting on the box is different on the new planet. The formula for gravitational force is F = \frac{G(m1m2)}{r^{2}}, where G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between their centers of mass. Since the new planet has twice the radius but one-third the mass of earth, the gravitational force acting on the box will be:
F' = \frac{G(m_box*m_planet)}{r'^{2}}
F' =\frac{ G(m_box*(1/3)*M_Earth)}{(2*R_Earth)^{2}}
F' = \frac{(1/36)*G*m_box*M_Earth}{(R_Earth)^{2}}
Therefore, the normal force acting on the box will be:
N' = m_box*g' = m_box*(1/6)*g
where g' is the acceleration due to gravity on the new planet, and is equal to (1/6)g because the mass of the planet is one-third that of earth.
Now we can calculate the frictional force on the box using the formula:
f' = mu*N' = mu*m_box*(1/6)*g
where mu is the coefficient of friction. Since mu is the same on both planets, we can write:
f'/f0 = (mu*m_box*(1/6)*g)/(mu*m_box*g)
f'/f0 = (1/6)
hence, the frictional force exerted by the board on the box is option B, 1/6 F0.

learn more about frictional force Refer: https://brainly.com/question/28585629

#SPJ11

a. The image includes galaxies that are elliptical, spiral, and irregular. b. Careful study of the image shows that the youngest galaxies were mostly irregular in shape.

e. We see the more distant galaxies as they were when they were quite young. c. The galaxies in this image are part of a large galaxy cluster, bound together by gravity is not a true statement. The Hubble Extreme Deep Field image is actually a composite of several images taken over a period of 10 years, capturing light from galaxies as far back as 13 billion years ago, showing a diverse range of galaxies in various stages of formation and evolution, but they are not part of a single galaxy cluster. d. Careful study of the image shows that all present-day galaxies are spirals is also not a true statement. While there are many spiral galaxies present in the image, there are also many elliptical and irregular galaxies, indicating a wide variety of galaxy types throughout the universe.

To learn more about galaxies click here https://brainly.com/question/29910373

#SPJ11

Some metals when the kinetic energy of their particles is decreased.

Hence, the correct option is D.

When the kinetic energy of the particles in a metal is decreased, it means that the particles are moving slower and have less energy. This can have a number of effects on the metal, depending on the specific properties of the metal.

A) Melting occurs when a solid substance is heated to a temperature where it becomes a liquid. A decrease in kinetic energy of particles is unlikely to cause melting of a metal.

B) Metals are good conductors of electricity due to the mobility of their electrons. A decrease in kinetic energy may not affect the metal's ability to conduct electricity, unless it affects the number of free electrons in the metal.

C) Most metals expand when they are heated and contract when they are cooled. However, a decrease in kinetic energy of particles in a metal may not cause it to expand.

D) Most metals contract when they are cooled.

Therefore, a decrease in kinetic energy of particles in a metal could lead to contraction of the metal.

Hence, the correct option is D.

To know more about kinetic energy here

https://brainly.com/question/26388057

#SPJ1

B and A are true statements regarding emission spectra, phosphorescence, and fluorescence.(D)

To explain, emission spectra show the wavelengths of light emitted by a substance when excited by energy. Both phosphorescence and fluorescence are types of luminescence.

A is true because phosphorescence involves a longer-lived excited state than fluorescence, resulting in the release of lower energy (longer wavelength) photons.

B is true because fluorescence occurs at longer wavelengths than phosphorescence since the energy transition is smaller in fluorescence, resulting in the release of lower energy (longer wavelength) photons. C is not true because it contradicts B.(D)

To know more about emission spectra click on below link:

https://brainly.com/question/18907409#

#SPJ11