The electron in the ground-state of H atom absorbs the photon of the wavelength of 93.78 nm. The energy level of the electron move is n₂ = 5.
The energy of the photons is expressed as :
E = hc / λ
Where,
The E is the energy = ?
The h is the Planck's constant = 6.63 × 10⁻³⁴J.s
The c is the speed of the light = 3 × 10⁸ m/s
The λ is the wavelength of the photon = 93.78 nm
The energy is expressed as the :
E= ( 6.63 × 10⁻³⁴J.s × 3 × 10⁸ m/s ) / 93.78 nm
E = 2.1 × 10⁻¹⁸ J
Therefore, the energy of the photons is 2.1 × 10²⁵ J.
Transition energy for the hydrogen atom is :
ΔE = - R ( 1/ n₂² - 1 / n₁²)
Where,
R = 13.6eV
n₁= 1
n₂ = ?
2.1 × 10⁻¹⁸ = - 2.8 × 10⁻¹⁸ ( 1/ n₂² - 1 / 1²)
n₂ = 5
The energy level is n₂ = 5.
To learn more about energy level here
https://brainly.com/question/17396431
#SPJ4
Help me please and thank you
Answer:
The direction of the force it would exert on a positive charge.
Explanation:
The direction of an electrical field at a point is the same as the direction of the electrical force acting on a positive test charge at that point.
Hope this helps!! :)
what information is provided by the ball-and-stick model and chemical structure for each molecule that is not provided in its formula?
The ball-and-stick model and chemical structure provide a more complete picture of the structure and properties of a molecule than its formula alone, making them important tools in the study of chemistry and biochemistry.
The ball-and-stick model and chemical structure provide information about the spatial arrangement of atoms in a molecule, which cannot be inferred from its chemical formula alone. The ball-and-stick model represents each atom in the molecule as a ball or sphere, and the bonds between atoms as sticks or lines.
The lengths and angles of the sticks provide information about the bond lengths and bond angles in the molecule, which are important factors in determining its properties. In addition, the chemical structure provides information about the stereochemistry of the molecule, which refers to the arrangement of atoms and bonds in three-dimensional space.
Stereochemistry is crucial in determining the biological activity of many molecules, as different stereochemical isomers can have vastly different properties. The chemical structure also provides information about the functional groups present in the molecule, which can affect its reactivity and interactions with other molecules.
To learn more about chemical structure
https://brainly.com/question/14481803
#SPJ4
At a particular point in time, a given reaction is found to have a K value larger than 1 and a Q value less than 1. Which of the following statements would be TRUE?
1. The reaction is already at equilibrium.
2. The reaction will proceed to the left.
3. The reaction will proceed to the right.
The connection between the reactant and product concentrations at equilibrium is expressed by the equilibrium constant or K value. An equilibrium product concentration greater than the reactant concentration is indicated by a K value greater than 1. Option 3 is correct.
The present concentration of the reactants is greater than the concentration of the products when Q is less than 1. In order to reach equilibrium and boost the product concentration, the reaction must go to the right. Because the concentration of the products is already greater than the concentration of the reactants, the reaction is not in equilibrium and cannot move to the leftThe correct option is 3.
To know more about equilibrium, here
brainly.com/question/30807709
#SPJ1
determine the strongest intermolecular force present between the molecules in a bulk sample of the described molecules.
The strongest intermolecular force present between molecules in a bulk sample depends on the types of molecules and their structures.
Generally, the three types of intermolecular forces are:
London dispersion forces: These are present in all molecules and result from temporary fluctuations in electron density that can induce a dipole moment in a neighboring molecule.
Dipole-dipole forces: These arise from the attraction between permanent dipoles in polar molecules.
Hydrogen bonding: This is a specific type of dipole-dipole force that occurs when a hydrogen atom is covalently bonded to a highly electronegative atom such as nitrogen, oxygen, or fluorine.
The relative strength of these forces depends on factors such as molecular size, shape, and polarity. In general, hydrogen bonding is the strongest intermolecular force, followed by dipole-dipole forces, and then London dispersion forces.
Therefore, to determine the strongest intermolecular force present between molecules in a bulk sample, we need to know the molecular structures and polarities of the molecules.
Learn more about intermolecular force here:
https://brainly.com/question/9007693
#SPJ11
What is the pH of 75.0 mL of a solution that is 0.041 M in a weak base and 0.053 M in the conjugate weak acid (
K
a
=
7.2
×
10
−
8
)
?
The pH of the solution is approximately 4.63.
To find the pH of a solution containing a weak base and its conjugate weak acid,
we can use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]).
First, we need to calculate the pKa from the given Ka value:
pKa = -log(Ka) = -log(7.2 × 10^-8) ≈ 7.14.
Next, we have the concentrations of the weak base ([A-] = 0.041 M) and the conjugate weak acid ([HA] = 0.053 M).
Now, we can plug these values into the Henderson-Hasselbalch equation: pH = 7.14 + log(0.041/0.053) ≈ 4.63. Therefore, the pH of the 75.0 mL solution which is 0.041 M in a weak base and 0.053 M in the conjugate weak acid is approximately 4.63.
To know more about weak base visit:
https://brainly.com/question/30893367
#SPJ11
Using the Henderson-Hasselbalch equation, the pH of a solution with a weak base (0.041M) and its conjugate weak acid (0.053M) with a Ka of 7.2 x 10^-8 is calculated to be approximately 6.98.
Explanation:First, we can make use of the Henderson-Hasselbalch equation that is given by pH = pKa + log([A-]/[HA]), where [A-] is the molarity of the weak base, [HA] is the molarity of the conjugate weak acid and pKa = -log(Ka).
Substituting the given values, we have pKa = -log(7.2 × 10−8) = 7.14. Therefore, the pH = 7.14 + log(0.041/0.053).
After performing the calculation, we get the pH to be approximately 6.98.
So, the pH of the solution containing the weak base and its conjugate weak acid equals 6.98.
Learn more about pH calculation here:https://brainly.com/question/34432529
in the reaction, h 2 po4- (aq) h 2 o (l) <--> hpo42- (aq) h 3 o (aq), which species is the {conjugateacid, conjugate base}?a) h 2 po4- b) h 2 o c) hpo42- d) h 3 o
The conjugate acid in the reaction is H₃O⁺ (d) and the conjugate base is HPO₄²⁻ (c).
In the given reaction, H₂PO₄⁻ (aq) + H₂O (l) <--> HPO₄²⁻ (aq) + H₃O⁺ (aq), we can identify the conjugate acid and base pairs by analyzing how the species transfer protons (H+ ions). H₂PO₄⁻ acts as an acid, donating a proton to H₂O, which acts as a base.
After the proton transfer, H₂PO₄⁻ becomes HPO₄²⁻ (conjugate base) and H₂O becomes H₃O⁺ (conjugate acid). Thus, in this reaction, the conjugate acid is H₃O⁺ (option d) and the conjugate base is HPO₄²⁻ (option c).
Learn more about conjugate base here:
https://brainly.com/question/30225100
#SPJ11
when you added naoh to your substrate during the biuret test, you
When adding NaOH to the substrate during the biuret test, the purpose is to raise the pH of the solution to a level that is conducive to the reaction between the peptide bonds and the copper ions present in the Biuret reagent.
This reaction results in the formation of a violet-colored complex, which is used to determine the presence of proteins in the substrate.
It is important to note that the addition of NaOH can also cause denaturation of the protein, which can affect the accuracy of the test results.
Therefore, it is important to carefully control the amount and timing of the NaOH addition to ensure that the substrate remains in its native state as much as possible.
The reaction can be monitored spectrophotometrically, and the absorbance at 540 nm can be used to quantify the amount of protein present in the sample.
To know more about Biuret. please visit.....
brainly.com/question/32366051
#SPJ11
aiden is going to roast a turkey thanksgiving the turkey is at room temperature 25 degrees cv and the oven is preheated to 175 c degrees after putting the turkey in the oven aiden accidentally turn the oven off what will happen to the flow thermal energy
The flow of thermal energy will gradually decrease.
What will happen to the flow of the thermal energy?The flow of thermal energy will gradually reduce when Aiden unintentionally turns the oven off after placing the turkey inside. Heat will move from the hotter turkey to the colder oven since the turkey will start out at a greater temperature than the oven. Thermal energy will keep moving until the temperatures are equal.
The internal temperature of the oven will begin to drop toward the surrounding room temperature over time if it is not being actively heated. The cooled oven and the space itself, as well as the turkey, will start to lose heat from the bird. The oven will still be warmer than the room, though, because it was initially prepared to a higher temperature.
Learn more about thermal energy:https://brainly.com/question/3022807
#SPJ1
you have 16 kg of a radioactive sample with a certain half-life of 30 years. how much is left after 90 years?
After 90 years, there is 2 kg of the radioactive sample remaining.
The half-life of a radioactive substance is the time it takes for half of the original quantity to decay. Since the half-life of the given substance is 30 years, we can use the following formula to determine the amount of substance remaining after a certain time:
N(t) =[tex]N * (1/2)^{(t/T)[/tex]
here N(t) is the amount remaining after time t, N is the initial amount, T is the half-life, and the (^) symbol denotes exponentiation.
Substituting the given values, we get:
[tex]N(90) = 16 * (1/2)^{({90/30)\\N(90) = 16 * (1/2)^3[/tex]
N(90) = 16 * 1/8
N(90) = 2 kg
Therefore, after 90 years, there is 2 kg of the radioactive sample remaining.
Learn more about radioactive visit: brainly.com/question/9932896
#SPJ4
notice that in the view on the left, the camera moves down so that the meniscus is always in the middle of the frame. why is it important for the camera to move with the liquid in the burette?
It is important for the camera to move with the liquid in the burette because it allows for a clearer and more accurate view of the meniscus.
The meniscus is the curved surface of the liquid in the burette and it is important to accurately measure its position in order to determine the volume of liquid dispensed. If the camera were to remain stationary while the liquid was being dispensed, the meniscus would move out of the frame and the measurement would not be accurate.
By moving the camera down with the liquid, the meniscus is always kept in the center of the frame, making it easier to measure and reducing the likelihood of errors in the measurement. This technique is often used in scientific experiments where precise measurements are required.
To know more about meniscus, Refer
https://brainly.com/question/24666570
#SPJ11
balance the following redox reaction in acidic solution. i2(s) +zn2 (aq)→ io−3(aq) +zn(s)
I2(s) +Zn2 (aq) + H₂O→ IO−3(aq) +Zn(s) + 2H+ is balanced redox reaction.
Define Redox reactions
Redox reactions, also referred to as oxidation-reduction processes, are reactions in which electrons are transferred from one species to another. An oxidised species is one that has lost electrons, whereas a reduced species has gained electrons.
Any chemical reaction in which the oxidation number of a molecule, atom, or ion changes by acquiring or losing an electron is referred to as an oxidation-reduction reaction. Some of the fundamental processes of life, such as photosynthesis, respiration, combustion, and corrosion or rusting, depend on redox reactions.
To learn more about Redox reactions use:
https://brainly.com/question/21851295
#SPJ4
How does Le Chatelier's Principle predict the shift for a reaction when the temperature is increased or decreased? Use the words endothermic and exothermic in your response.
According to Le Chatelier's Principle a system that is in equilibrium will shift in a way that tends to counteract any externally imposed changes and bring about equilibrium.
According to Le Chatelier's Principle a reaction will shift in response to temperature changes. If a reaction is exothermic meaning that heat is released, then raising the temperature will cause the equilibrium to move to the left, towards the reactants in order to absorb the extra heat. In contrast, if the temperature is lowered the equilibrium will move to the right toward the products. In an effort to produce more heat to make up for the loss.
However if a reaction is endothermic, which means it absorbs heat, then raising the temperature will cause the equilibrium to shift to the right towards the products in order to absorb more heat to make up for the rise. The equilibrium will move to the left, towards the reactants as the temperature drops, allowing some of the heat to be released to make up for the drop.
Learn more about Le Chatelier's Principle at:
brainly.com/question/29009512
#SPJ1
explain why is energy input required to add an electron to zinc
Answer: When you add an electron to zinc, it needs some extra energy. This is because zinc atoms naturally don't like having an extra electron. The extra electron and the electrons already present in zinc repel each other due to their negative charges. So, you have to give some energy to the zinc atom to overcome this repulsion and make it accept the additional electron. Basically, energy input is required to make zinc accept an extra electron because the electron doesn't fit easily and needs some force to be added.
Explanation: hope this helps
Saturation is a state of equilibrium. In a saturated solution at a specific temperature, rate of dissolving equals the rate of crystallization. Use reference table G to find which amount of the compound represents equilibrium?
40 grams of KCl at 60 degree Celsius in 100 grams of water
40 grams of KNO3 at 25 degree Celsius in 100 grams of water
20 grams of KClO3 at 80 degree Celsius in 100 grams of water
Let's contrast the numbers given with how much solute would be present in a saturated solution at the specified temperature:
Since the amount of solute is less than the solubility of KCl at that temperature, a solution of 40 g of KCl in 100 g of water at 60 °C is unsaturated.Since the amount of solute is less than the solubility of KNO3 at that temperature, a solution of 40 g of KNO3 in 100 g of water at 25°C is unsaturated.Since the amount of solute is equal to the solubility of KClO3 at 80 °C, a solution of 20 g of KClO3 in 100 g of water is saturated.Thus, the equilibrium is represented by 20 g of KClO3 at 80 °C in 100 g of water.
Learn more about saturated solution, here:
https://brainly.com/question/1851822
#SPJ1
If you weighed out more than 1.2 g of your unknown acid, would the final calculated k_a be more than, less than or the same as the value you determined in the experiment? Why?
Changing the mass of the acid used in the experiment would not affect the Ka value. it's worth noting that if the experimental conditions were altered along with the increase in acid mass.
If you weighed out more than 1.2 g of your unknown acid, the final calculated Ka (acid dissociation constant) would likely be the same as the value determined in the experiment, assuming the conditions and methodology remain constant.
The Ka value represents the equilibrium constant for the dissociation of the acid in water, which is a characteristic property of the acid itself. It is independent of the amount of acid present in the solution. Therefore, changing the mass of the acid used in the experiment would not affect the Ka value.
In acid-base experiments, the concentration of the acid is typically used to calculate the Ka value. Concentration is defined as the amount of substance per unit volume. In this case, if you weigh out more than 1.2 g of the acid, you would dissolve it in a larger volume of solvent to maintain the same concentration. This would ensure that the ratio of acid to water remains constant, and the equilibrium constant, Ka, would not change.
However, it's worth noting that if the experimental conditions were altered along with the increase in acid mass, such as using a different volume of water or altering the temperature, it could potentially impact the calculated Ka value. In such cases, it would be important to consider the specific details of the experiment to determine the potential effects on the final calculated Ka.
To know more about acid refer to
https://brainly.com/question/29796621
#SPJ11
1.) Why is the stoichiometric equation insufficient for determining reaction rates?a.) Stoichiometry provides theory but not the experimental component necessary for reaction rates.b.) Many mechanisms can satisfy the stoichiometric equation.c.) The stoichiometric mechanism does not include the time dependence needed for reaction rates.d.) Stoichiometry provides the microscopic detail but not the broad overview of the reaction
Many mechanisms can satisfy the stoichiometric equation that's why it is insufficient for determining reaction rates . Option B is correct.
The exact numbers that show the correct proportions of the reactant and product are referred to as stoichiometry. Stoichiometry, in chemistry, is the measurement of the proportions in which elements or compounds react with one another.
The relative amounts of the reactants are crucial for determining the precise amount of each starting material required for the reaction. The laws of conservation of mass and energy and the law of combining weights or volumes serve as the foundation for the guidelines that are followed when determining stoichiometric relationships.
Learn more about Stoichiometric equation:
brainly.com/question/30820349
#SPJ1
which solution will provide the lowest freezing point?group of answer choices1.0 m na2co31.2 m nacl1.0 m kcl2.0 m ki
The mixture of **1.0 M [tex]Na_2CO_3[/tex]**2 will have the lowest freezing point.
what is The freezing point of a substance?
The temperature at which a liquid transforms into a solid when cooled is known as the freezing point. It is often referred to as the temperature at which a solid melts.
A substance's freezing point is a collective attribute. This indicates that it is dependent on the number of drugs in the system.
The freezing point is given by; T - Ta = K * m * i
Where;
T = freezing point of the pure solution
Ta = freezing point of the solution containing the solute
K = freezing point constant
m = molality of the solution
i= Van't Hoff factor
If we look at all the options provided, KI has only two particles in the solution and a molality of 1.0 m hence it should exhibit the lowest freezing point of the solution.
To know more about the lowest freezing point, visit :
brainly.com/question/12774052
#SPJ4
25 grams of KNO3 are dissolved in 100 grams of water. If I want a saturated solution at 60 degrees C, how many more grams would I need to add?
Answer:
45.9 grams
Explanation:
which nuclide(s) would you predict to be stable? K-48, Br-79, and Ar-32
To determine whether a nuclide is stable, one needs to look at its neutron-to-proton ratio. Stable nuclides typically have a certain range of neutron-to-proton ratios, while unstable nuclides tend to have either too few or too many neutrons for a given number of protons. K-48, Br-79, and Ar-32 are all unstable isotopes, but Ar-32 (nucleus) is the most stable of the three, which is the last one.
The stability of a nucleus depends on the balance between the strong nuclear force, which holds protons and neutrons together, and the electromagnetic force, which tends to repel protons from each other due to their positive charges. K-48 has 19 protons and 29 neutrons, Br-79 has 35 protons and 44 neutrons, and Ar-32 has 18 protons and 14 neutrons. Using the ratio of protons to neutrons, one can see that K-48 has a proton-to-neutron ratio of about 0.66, Br-79 has a ratio of about 0.80, and Ar-32 has a ratio of 1.29. Based on the proton-to-neutron ratios alone, it is said that Ar-32 is the most stable of the three, as it has the closest ratio to the ideal ratio of 1:1 for stable nuclei.
Learn more about nuclides here.
https://brainly.com/question/28305293
#SPJ1
what reagents are necessary to perform the following reaction cn nh2NH2 OA) H20, H+ B) H20, OH C) LiAlH4, H20 D) DIBAL-H, H20 E) CH3 MgBr, H20
The given reaction involves the compound cn nh2NH2. To perform this reaction, the necessary reagents are:
C) LiAlH4, H20
LiAlH4 (lithium aluminum hydride) is a strong reducing agent that is capable of reducing the carbonyl group (C=O) present in cn nh2NH2 to a primary alcohol (C-OH) by adding a hydride (H^-) ion. The resulting compound is then hydrolyzed (reaction with water) to give the desired product.
Option A) H20, H+ and B) H20, OH are not suitable reagents as they will not reduce the carbonyl group to a primary alcohol.
Option D) DIBAL-H, H20 (diisobutylaluminum hydride) is a milder reducing agent compared to LiAlH4 and is used for selective reduction of carbonyl groups to aldehydes. It may also cause over-reduction to form primary alcohols, which is not desired in this case.
Option E) CH3 MgBr, H20 (methyl magnesium bromide) is a Grignard reagent that is used for nucleophilic addition reactions. It may react with the carbonyl group to form a tertiary alcohol, which is not the desired product in this case.
Hi! To perform the reaction where you convert a nitrile (CN) to a primary amine (NH2), you would need the following reagents:
Your answer: C) LiAlH4, H2O
LiAlH4 (lithium aluminum hydride) is a strong reducing agent that converts nitriles to primary amines, and H2O is used to quench the reaction.
To know more about lithium aluminium hydride visit:
https://brainly.com/question/30298974
#SPJ11
In the realm of organic chemistry, a cyano group (CN) can be transformed into an amine group (NH2) using a powerful reducing agent named lithium aluminium hydride (LiAlH4), typically in water. Therefore, the correct choice, in this case, is option C, LiAlH4 and H20. This conversion is a two-step process involving an intermediate imine step.
Explanation:The student appears to be asking about a reagent suitable for a particular chemical reaction: converting a cyano (CN) group to an amino (NH2) group. This is a topic related to organic chemistry.
The correct reagent for this transformation is generally LiAlH4 (lithium aluminium hydride) in water (H20). So, the correct choice is option C). This substance is a powerful reducing agent known for its ability to convert cyano groups into amino groups.
Please note that this reagent is used in a two-step process:
The reaction of the starting material with LiAlH4 to form an imine intermediate.Hydrolysis of the imine in the presence of water to give the desired amine product.Learn more about Organic Chemistry Reducing agents here:https://brainly.com/question/35157785
#SPJ11
What is the molarity of a glucose solution that contains 10.0 g of C6H12O6 (180.18 g/mol) dissolved in 100.0 mL of solution?0.00555 M0.0555 M0.555 M1.80 M18.0 M
The molarity of the glucose solution is 0.555 M. This means that there are 0.555 moles of glucose per liter of solution
To determine the molarity of a glucose solution, we need to first calculate the number of moles of glucose present in the solution. This can be done by dividing the mass of glucose by its molar mass. In this case, the mass of glucose is 10.0 g and its molar mass is 180.18 g/mol. So, the number of moles of glucose can be calculated as follows:
Number of moles = Mass / Molar mass
Number of moles = 10.0 g / 180.18 g/mol
Number of moles = 0.0555 mol
Next, we need to calculate the volume of the solution in liters, as molarity is defined as the number of moles of solute per liter of solution. In this case, the volume of the solution is 100.0 mL, which is equivalent to 0.1 L. So, the molarity of the glucose solution can be calculated as follows:
Molarity = Number of moles / Volume
Molarity = 0.0555 mol / 0.1 L
Molarity = 0.555 M
Therefore, the molarity of the glucose solution is 0.555 M. This means that there are 0.555 moles of glucose per liter of solution. This calculation is important in many biological and chemical processes, as molarity is a measure of concentration and is commonly used in stoichiometric calculations.
Learn more about molarity here:
https://brainly.com/question/8732513
#SPJ11
what atomic or hybrid orbitals make up the sigma bond between c and n in hydrogen cyanide, hcn?
The sigma bond between carbon (C) and nitrogen (N) in hydrogen cyanide (HCN) is formed by the overlap of the sp hybrid orbital on C and the sp hybrid orbital on N.
In HCN, the carbon atom is sp hybridized and forms two sigma bonds: one with hydrogen (H) and the other with nitrogen (N). The sp hybrid orbital of carbon is formed by mixing one s orbital and one p orbital, and the sp hybrid orbital of nitrogen is formed by mixing one s orbital and one p orbital.
The overlap of the sp hybrid orbital on C and the sp hybrid orbital on N forms a strong sigma bond between the two atoms. The lone pair on nitrogen occupies the remaining sp hybrid orbital, which is oriented perpendicular to the plane of the sigma bond.
Learn more about hydrogen here:
https://brainly.com/question/28937951
#SPJ11
45.0 l of an ideal gas at 288 k and 3.50 atm are heated to 373 k with a new pressure of 9.00 atm. what is the new volume (in l)?
To find the new volume of the ideal gas, you can use the combined gas law formula, which relates the initial and final states of the gas:
(P1 * V1) / T1 = (P2 * V2) / T2
where P1 is the initial pressure (3.50 atm), V1 is the initial volume (45.0 L), T1 is the initial temperature (288 K), P2 is the final pressure (9.00 atm), V2 is the final volume, and T2 is the final temperature (373 K).
Rearrange the formula to solve for V2:
V2 = (P1 * V1 * T2) / (P2 * T1)
Now, plug in the given values:
V2 = (3.50 atm * 45.0 L * 373 K) / (9.00 atm * 288 K)
V2 = (5812.5) / (2592)
V2 ≈ 22.42 L
The new volume of the ideal gas is approximately 22.42 liters.
For more question like volume of the ideal gas visit the link below:
https://brainly.com/question/11676583
#SPJ11
what is the binding energy of a fe2656 nuclide, in mev per nuclide? mass spectrometric measurements give the experimental mass of an 5626fe atom: 55.9349 amu.
60.68 MeV per nuclide is the binding energy of a Fe-2656 nuclide calculated by Einstein's equation .
The binding energy of a Fe-56 nuclide can be calculated using the Einstein's famous equation [tex]E=mc^{2}[/tex]. The difference in mass between the Fe-56 nuclide and the sum of the masses of its constituent particles (protons and neutrons) gives us the mass defect, which is then converted into energy using the equation E=mc².
The experimental mass of a Fe-56 atom is given as 55.9349 amu. The mass of 56 protons and neutrons is (56 x 1.66054 x 10⁻²⁷ kg)/1.66054 x 10⁻²⁷ kg/amu = 56 amu. Therefore, the mass defect is 56 - 55.9349 = 0.0651 amu.
Converting the mass defect into energy using E=mc², we get:
E = (0.0651 amu) x (931.5 MeV/c² per amu) = 60.68 MeV
Therefore, the binding energy of a Fe-56 nuclide is 60.68 MeV per nuclide.
Learn more about binding energy here
https://brainly.com/question/30707607
#SPJ11
In a diagnostic procedure, a patient in a hospital ingests 60 mCi of gold-198 (t1/2= 2.7 days). What is the activity at the end of one month, assuming none of the gold is eliminated from the body by biological functions?
The activity at the end of one month, assuming none of the gold is eliminated from the body by biological functions, can be calculated using the radioactive decay equation:
A = A₀ e^(-λt)
Where A is the activity at the end of the given time, A₀ is the initial activity, λ is the decay constant, and t is the elapsed time.
First, we need to determine the decay constant (λ) of gold-198 using its half-life (t1/2). The formula for calculating decay constant is:
λ = ln(2) / t1/2
Substituting the values of gold-198, we get:
λ = ln(2) / 2.7 days
λ = 0.257 days⁻¹
Next, we can find the initial activity (A₀) of gold-198 when the patient ingested 60 mCi. One millicurie (mCi) is equal to 3.7 x 10⁷ disintegrations per second (dps). Therefore, the initial activity can be calculated as:
A₀ = 60 mCi x 3.7 x 10^7 dps/mCi
A₀ = 2.22 x 10^9 dps
Now, we can calculate the activity at the end of one month (30 days) using the radioactive decay equation:
A = A₀ e^(-λt)
A = 2.22 x 10⁹ dps x e^(-0.257 days⁻¹ x 30 days)
A = 1.08 x 10⁸ dps
Therefore, the activity of gold-198 at the end of one month, assuming none of it is eliminated from the body by biological functions, is 1.08 x 10⁸ dps.
In conclusion, the activity of gold-198 ingested by the patient in a diagnostic procedure would reduce to 1.08 x 10⁸ dps at the end of one month, assuming none of it is eliminated from the body by biological functions. This calculation was done using the radioactive decay equation and the half-life of gold-198.
To know more about radioactive decay equation, visit:
https://brainly.com/question/30330344
#SPJ11
what is the coordination number of the au atom in k [au(cn)2(scn)2]? 3 4 2 6
The coordination number of the Au atom in K[Au(CN)2(SCN)2] is 4.
In the complex ion K[Au(CN)2(SCN)2], the central metal atom is gold (Au). The coordination number represents the number of ligands (atoms, ions, or molecules) that are attached to the central metal atom in a coordination compound. In this case, the ligands are CN- and SCN-, and each ligand forms a coordinate covalent bond with the central Au atom.
There are two CN- ligands and two SCN- ligands in the complex ion, making a total of 4 ligands bonded to the Au atom. Therefore, the coordination number of the Au atom in K[Au(CN)2(SCN)2] is 4. This number reflects the number of sigma bonds formed between the ligands and the central metal atom, providing valuable information about the geometry and structure of the coordination compound.
To know more about the covalent bond visit:
https://brainly.com/question/30388736
#SPJ11
What is E at 25°C for the reaction? Zn(s) | Zn2+ (0.10 M) |I Cu2+ (1.0M) I Cu(s) E°cell= +1.100 V
The cell potential E at 25°C for the given reaction is 1.183 V.
To find the cell potential E at 25°C for the given reaction, we can use the Nernst equation; E = E°cell - (RT/nF) ln(Q)
where; E°cell is the standard cell potential, which is given as +1.100 V
R is the gas constant, which is 8.314 J/(mol×K)
T is the temperature in Kelvin, which is 25°C + 273.15 = 298.15 K
n is the number of electrons transferred in the reaction, which is 2
F will be a Faraday's constant, which is 96,485 C/mol
Q is the reaction quotient, which can be calculated using the concentrations of the species involved in the reaction.
The balanced half-reactions for the cell reaction are:
Zn(s) → Zn²⁺ + 2e⁻
Cu²⁺ + 2e⁻ → Cu(s)
The overall reaction can be obtained by adding the two half-reactions and canceling out the electrons;
Zn(s) + Cu²⁺ → Zn²⁺ + Cu(s)
The reaction quotient Q for this reaction will be;
Q = ([Zn²⁺]/[Cu²⁺]) = 0.10/1.0 = 0.1
Now we can substitute the given values into the Nernst equation;
E = 1.100 V - (8.314 J/(molK) / (296,485 C/mol)) ln(0.1)
E = 1.100 V - (0.0000432 V) ln(0.1)
E = 1.100 V - (-0.08328 V)
E = 1.183 V
Therefore, the cell potential E is 1.183 V.
To know more about cell potential here
https://brainly.com/question/31961504
#SPJ4
a 0.287 g sample of a monoprotic acid is dissolved in water and titrated with 0.110 m koh. what is the molar mass of the acid if 29.0 ml of the koh solution is required to neutralize the sample?
The molar mass of the monoprotic acid is 90.0 g/mol. To find the molar mass of the monoprotic acid, follow some steps.
The steps are as follow:
1. First, determine the moles of KOH used in the titration. To do this, multiply the volume of KOH (in liters) by its molar concentration:
(29.0 mL) * (1 L / 1000 mL) * (0.110 mol/L) = 0.00319 mol KOH
2. Since the acid is monoprotic, it has a 1:1 ratio with KOH in the neutralization reaction. Therefore, the moles of acid are equal to the moles of KOH:
0.00319 mol acid
3. Now, calculate the molar mass of the acid. Divide the mass of the acid sample by the moles of acid:
(0.287 g) / (0.00319 mol) = 90.0 g/mol
So, the molar mass of the monoprotic acid is 90.0 g/mol.
Learn more about molar mass at
https://brainly.com/question/22997914
#SPJ11
name the following: a. propanamide b. 2-aminopropanoic acid c.2-aminoethanoic acid d.butanamide
. Propanamide is an organic compound with the molecular formula C3H7NO. It is a primary amide, which means it contains a carbonyl group (C=O) attached to an amino group (NH2) on a primary carbon atom (i.e., the carbon atom directly attached to the nitrogen atom).
Propanamide is a colorless to pale yellow liquid at room temperature and is commonly used as a solvent in the production of polymers, pharmaceuticals, and other industrial products.
b. 2-Aminopropanoic acid, also known as Alanine, is an α-amino acid with the molecular formula C3H7NO2. It is a nonpolar amino acid, which means it has a hydrophobic side chain (methyl group) and is commonly found in the interior of proteins. Alanine is important in protein synthesis and is also a source of energy for muscle tissues during exercise.
c. 2-Aminoethanoic acid, also known as Glycine, is an α-amino acid with the molecular formula C2H5NO2. It is the simplest amino acid and is the only one that is not optically active because its R-group is a hydrogen atom. Glycine is an important neurotransmitter in the central nervous system and is also used in the synthesis of proteins, purines, and heme.
d. Butanamide, also known as Butyramide or Butyramine, is an organic compound with the molecular formula C4H9NO. It is a primary amide that is commonly used as a precursor in the production of various chemicals and pharmaceuticals. Butanamide can be synthesized from butyric acid, which is a fatty acid found in milk, butter, and cheese. It is also found in some plant extracts and is a metabolite of the neurotransmitter GABA.
Learn more about Propanamide here:
https://brainly.com/question/28233707
#SPJ11
Iodine 13153I is used in diagnostic and therapeutic techniques in the treatment of thyroid disorders. This isotope has a half-life of 8.04 days. What percentage of an initial sample of 13153I remains after 30.0 days?
After 30.0 days, only 14.6% (or 0.146) of the initial sample of 13153I remains.
This is because the half-life of 13153I is relatively short, so a large portion of the material decays within a short amount of time. For radioactive decay: N(t) = N0 * (1/2)^(t/T1/2), where N(t) is the amount of radioactive material at time t, N0 is the initial amount of radioactive material, and T1/2 is the half-life of the material.
In this case, the initial amount of 13153I is 100% (or 1.00), since we are looking for the percentage that remains. We also know that the half-life of 13153I is 8.04 days. Therefore, we can plug in these values and solve for N(30): N(30) = 1.00 * (1/2)^(30/8.04) = 0.146
To know more about radioactive decay visit :-
https://brainly.com/question/14394731
#SPJ11