Answer: The electron configuration of carbon atom is written as 1s²,2s², 2p².
Explanation:
The electronic configuration of an atom is defined as the arrangement of electrons into the shells or orbit of an atom. The constituents of an atom are proton, neutron and electron. the nucleus of an atom, where most of its mass are concentrated, consists of neutrons and protons fused together. Electrons occupy the shells surrounding the nucleus. The shells are lettered K, L, M, N and so on. Numerically, K shell is numbered 1, L is 2 and so on. These numbers also correspond with the increase in the energy level. All the electrons in K shell for instance belong to the first energy level and they have equal energy.
There is a limit to the number of electrons that can be found in a shell. This can be obtained by a formula 2n² where "n" is the energy level number of the shell.
K: 2n² = 2 × 1² = 2
L: 2n² = 2× 2² = 8
These shells are further subdivided into subshells. There are 4 subshells, s, p, d, and f. Each subshell can hold a different number of electrons.
This electron configuration of carbon can be written as 1s² 2s² 2p² where 1s, 2s, and 2p are the occupied subshells, and the superscript "2" is the number of electrons in each of these subshells.
what is the most metallic item on the pterotic table
Answer:
francium or cesium
A car traveling at 30 m/s comes to a stop in 5 seconds. What is the acceleration of this car?
Answer:
6m/s brainliest?
Explanation:
Answer:
6 m/s
Explanation:
How are tadpoles and larvae similer
Answer: Tadpole, also called polliwog, aquatic larval stage of frogs and toads. Compared with the larvae of salamanders, tadpoles have short, oval bodies, with broad tails, small mouths, and no external gills. The internal gills are concealed by a covering known as an operculum.
Explanation:
There are three common functional groups in organic chemistry that are readily ionized by adjusting the pH of the aqueous solution during an extraction. Name and write the chemical structure of these three functional groups, and show each of them in both their neutral and ionized forms.
Answer:
Following are the solution to the given question:
Explanation:
Please find the ionic compound in the solution file:
Following are the three functional groups which affected by pH:
Carboxylic acidPhenol functional group Amine functional groupDerive the equation for half life 0.693/k
Determine the chemical formula for the molecule shown.
-Which of the following terms could most likely apply to the molecule shown?
hydrocarbon
polymer
organic
inorganic
Explain your answer to the second part of the question above.
Answer: Formula is C4H8O. In every branch of line formula there are Carbon atom. Carbon makes 4 bonds so In branch left in which two CH3-groups are attached there are also an Hydrogen aton which is not shown.
Explanation: Molecule is organic, it is classified as aldehyde.
Hydrocarbons contains only Carbon and Hydrogen atoms, Organic molecules can contain also other atoms.
Reactions of aldehydes are reduction to alcoholes or oxidation to carboxylic acids. It can not for a polymer.
How are solutions and compounds similar?
Answer:
hope you liked it!!!!!!
A compound is a pure substance that is composed of elements chemically bonded in definite proportions. A compound can be broken down into simpler substances only by chemical reactions, such as electrolysis.
A solution is a homogeneous mixture, meaning that it is the same throughout. A solution is composed of one or more solutes dissolved in a solvent. The proportions of the solute(s) can vary, as the components of a solution are not chemically bonded. The components of a mixture can be separated by physical means, such as filtration and distillation
Question 1 (1 point)
It is not necessary to balance an equation to find the correct mole ratios.
True
False
Answer:
false
Explanation:
cozz you'll need it inorder to find the correct mole ratio
The enthalpy of formation of water is -285.8 kJ/mol. What can be inferred from this statement? O The enthalpy of the products is equal to the enthalpy of the reactants. O Heat is absorbed during the process. O Heat is released during the process. The enthalpy of the products is more than the enthalpy of the reactants.
Answer:
the answer is c
Explanation:
i did the test
The enthalpy of the formation of water is -285.8 kJ/mol. The information that can be made by the statement is heat is released during the process. The correct option is C.
What is enthalpy?Enthalpy is the volume times the pressure times the internal energy of the system. It is an entity of thermodynamics. It is the measurement of the energy in a thermodynamic system. The enthalpy totals the internal energy plus pressure and volume.
The statement that is given here is given that enthalpy is -285.8 kJ/mol. The value is negative, so the energy is released here. When energy is gained the energy will be positive and when the energy is released it is negative.
Thus, the correct option is C, heat is released during the process regarding the given statement of enthalpy.
To learn more about enthalpy, refer to the link:
https://brainly.com/question/24136717
#SPJ6
omg posting takes away point WHAT.
Answer:
yep
Explanation:
that why I have someone else post questions for me. But its a good incentive to help others to help you to help me to you to help others.
What would the products be for the reaction between Na3PO4 + MgSO4?
MgSO4 + Na3PO4 = Na2SO4 + Mg3(PO4)2
Answer: The products of Na3PO4 + MgSO4 are Na2SO4 + Mg3(PO4)2
Explanation:
Every cell is surrounded by a thin membrane. What is the main function of this cell membrane?
A.
to protect the cell from invasion by bacteria and viruses
B.
to allow each cell to form connections with other cells
C.
to limit the size of the cell and keep the shape of the cell the same
D.
to separate the inside of the cell from the outside environment
Answer:
The main function of the cell membrane is to protect the cell from the outer environment.
Answer: The answer is D.) to separate the inside of the cell from the outside environment
Explanation:
Will give brainliest
In the following acid-base reaction
H2O is the
HCl(g) + H2O(l) →H30+(aq) + Cl-(aq)
В
acid
base
conjugate
acid
CONJUGATE ACID
the acid's conjugate base because it can theoretically reform the acid by aaccepting a proton.
I hope this is correct >.<
QUESTION 29 The PH of a solution whose Hydroxide ion concentration is 0.45M is:
A. 0.071
B. 0.347
C. 13.65
D. 12.48
E. 12.7
Answer:
C. 13.65.
Explanation:
With the given hydroxide ion concentration [OH⁻] we can calculate the pOH of the solution, using the following formula:
pOH = -log[OH⁻]pOH = 0.35Then, with the pOH we can proceed to calculate the pH of the solution, with the formula:
pH + pOH = 14pH = 14 - pOHpH = 13.65The correct answer is option C. 13.65.
What is the best reason for carbon dioxide existing as a gas at standard temperature and pressure?
A)
Carbon dioxide molecules have the same spin within each of their orbitals.
As a result, the carbon dioxide molecules are less attracted to each other
when compared to the intramolecular bonds.
B)
Coulomb's law shows that the interaction between protons and electrons
within the atoms of each carbon dioxide molecule is significantly stronger
than the proton-electron interaction between each molecule.
C)
The entropy of carbon dioxide is much greater than the entropy of its
surroundings.
D)
Carbon dioxide has too much internal energy that the molecule-molecule
interaction cannot keep the molecules together.
6. (08.02 MC)
What is the molarity of a solution prepared by dissolving 10.0 grams of NaOH in enough water to make a solution with a total volume of 2.40 liters? (5 points)
O 0.104 M NaOH
O 0.201 M NaOH
0 0.361 M NaOH
O 0.412 M NaOH
Answer:0.104
Explanation:
Answer:
0.104
Explanation:
convert grams to moles “10.0 x 1/40”
divide moles by the liters 0.25/2.4
answer: 0.104
A __ is a solid that forms in a liquid when a chemical reaction takes place.
Answer:
A precipitate is a solid that forms in a liquid when a chemical reaction takes place.
1) For the following molecules: - Draw the Lewis structures/dots - Determine the polarity (polar or non-polar). - List all intermolecular forces. a) CF4 b) CH2Br2 c) H2CO3 d) N2 e) PCl3 f) XeF2 g) NH4
Answer:
ed
Explanation:
ed
Spread your smarts while you wait.
Answer:
lol ok 1+1=2 2 x 2=4
have a good day :)
Explanation:
Answer: oke
Explanation: have a goood day!
How many moles are there in 2.30 grams of NH4SO2?
Answer:
There are 0.028 moles in 2.30 grams of NH₄SO₂.Explanation:
To Calculate:
How many moles are there in 2.30 grams of NH₄SO₂?We know that:
Mole = Given mass/Molar massWe have:
Given mass = 2.30 gMolar mass of NH₄SO₂ = 82Finding the number of mole:
⟶ Mole = 2.30/82
⟶ Mole = 0.028 (approx.)
Hence,
There are 0.028 moles in 2.30 grams of NH₄SO₂.How many molecules are present in 4.5
moles of H2O?
Answer:
Mole of the H2O = 4.5
Number of molecules =4.5 multipled by avogadro's number.
Calculate the grams of nitrogen in 125 g of NH4NO3
Pls quick AND WHO UR WORK I REALLY NEED HELP PLS
Answer:
43.75 g of Nitrogen
Explanation:
We'll begin by calculating the mass of 1 mole of NH₄NO₃. This can be obtained as follow:
Mole of NH₄NO₃ = 1 mole
Molar mass of NH₄NO₃ = 14 + (4×1) + 14 + (3×16)
= 14 + 4 + 14 + 48
= 80 g/mol
Mass of NH₄NO₃ =?
Mass = mole × molar mass
Mass of NH₄NO₃ = 1 × 80 = 80 g
Next, we shall determine the mass of N in 1 mole of NH₄NO₃.
Mass of N in NH₄NO₃ = 2N
= 2 × 14
= 28 g
Thus,
80 g of NH₄NO₃ contains 28 g of N.
Finally, we shall determine the mass of N in 125 g of NH₄NO₃. This can be obtained as follow:
80 g of NH₄NO₃ contains 28 g of N.
Therefore, 125 g of NH₄NO₃ will contain = (125 × 28) / 80 = 43.75 g of N.
Thus, 125 g of NH₄NO₃ contains 43.75 g of Nitrogen
What is one movement that liquid water CANNOT do while on or at the Earth's surface? (GIVE RIGHT ANSWER OR I DELETE 100 POINTS)
Answer:
One movement that i can't do is float in mid air
Explanation:
Solve (2 x 10^3) + (7 x 10^5) *
Answer:
702000
Explanation:
(2 x 10^3) + (7 x 10^5)
=> 2 x 1000 + 7 x 100000
=> 2000 + 700000
=> 702000
Pls give theeee answerrrrrrrr
What is the hypothetical van't Hoff factor of magnesium nitrate, Mg(NO3)2?
Answer:
The hypothetical van't Hoff factor of magnesium nitrate,[tex]Mg(NO_3)_2[/tex] is 3 .
Explanation:
Lets calculate -
[tex]Mg(NO_3)_2\rightarrow Mg^2^+ +2NO_3^-[/tex]
We know that ,
[tex]i=\alpha n+(1-\alpha )[/tex]
Dissociation should be 100% for the hypothetical vant hoff factor , that is
[tex]\alpha =1[/tex] and [tex]n=3[/tex] for [tex]Mg(NO_3)_2[/tex]
Therefore , putting the given values ,
[tex]i=1\times3+(1-1 )[/tex]
[tex]i=3+0[/tex]
[tex]i=3[/tex]
Hence , the answer is 3.
The hypothetical van't Hoff factor of magnesium nitrate is 3.
Van't Hoff factor is a measure of the deviation of a solution from ideal behavior. It depends on the number of particles in the solution. The more the particles in solution, the greater the Van't Hoff factor and the greater the deviation from ideal behavior.
For Mg(NO3)2, the hypothetical van't Hoff factor is 3 since there are three particles in solution when magnesium nitrate is dissolved in water.
Learn more: https://brainly.com/question/6284546
A 0.150-kg sample of a metal alloy is heated at 540 Celsius an then plunged into a 0.400-kg of water at 10.0 Celsius, which is contained in a 0.200-kg aluminum calorimeter cup. The final temperature of the system is 30.5 Celsius. What is the specific heat of the metal alloy in J/Kg.Celsius
Answer:
[tex]C_{alloy}=0.497\frac{J}{g\°C}[/tex]
Explanation:
Hello there!
In this case, according to this calorimetry problem on equilibrium temperature, it is possible for us to infer that the heat released by the metal allow is absorbed by the water for us to write:
[tex]Q_{allow}=-(Q_{water}+Q_{Al})[/tex]
Thus, by writing the aforementioned in terms of mass, specific heat and temperature, we have:
[tex]m_{alloy}C_{alloy}(T_{eq}-T_{alloy})=-(m_{water}C_{water}(T_{eq}-T_{water})+m_{Al}C_{Al}(T_{eq}-T_{Al})[/tex]
Then, we solve for specific heat of the metallic alloy to obtain:
[tex]C_{alloy}=\frac{-(m_{water}C_{water}(T_{eq}-T_{water})+m_{Al}C_{Al}(T_{eq}-T_{Al})}{m_{alloy}(T_{eq}-T_{alloy})}[/tex]
Thereby, we plug in the given data to obtain:
[tex]C_{alloy}=\frac{-(400g*4.184\frac{J}{g\°C} (30.5\°C-10.0\°C)+200g*0.900\frac{J}{g\°C}(30.5\°C-10.0\°C)}{150g(30.5\°C-540\°C)} \\\\C_{alloy}=0.497\frac{J}{g\°C}[/tex]
Regards!
What do scientists use the term “light-year” to describe?
Answer:
Astronomers measure distance in space or the distance light travels in one Earth year.
" A light-year is how astronomers measure distance in space. It's defined by how far a beam of light travels in one year – a distance of six trillion miles."
10 ml of a 0.25M solution is diluted to make exactly 250 ml of solution. What's the concentration of the diluted solution?
Answer:
0.01 M
Explanation:
As this problem deals with a dilution process, we can solve it by using the following formula:
C₁V₁=C₂V₂Where subscript 1 stands for the initial concentration and volume, while 2 stands for the final conditions.
That means that in this case:
C₁ = 0.25 MV₁ = 10 mLC₂ = ?V₂ = 250 mLWe input the given data:
0.25 M * 10 mL = C₂ * 250 mLC₂ = 0.01 MWhat [H3O+] in a solution of a PH of 0.60 is