The diagram shows a man using a lever to move a rock.
Which change can he make to the fulcrum to decrease the force he has to apply?
A- Remove the fulcrum
B- Put the fulcrum on top of the lever.
C- move the fulcrum closer to himself
D-
move the fulcrum closer to the rock

Answer:

Orion Nebula & cone nebula

Explanation:

From the huge, youthful stars that are forming the nebula to the pillars of thick gas that could be the homes of burgeoning stars, the Orion Nebula is a picture book of star formation. The four heaviest stars in the nebula reside in the bright central field. Since the stars are arranged in a trapezoid shape, they are known as the Trapezium.

These stars' ultraviolet radiation is cutting a hole in the nebula and stars that are already young enough to have disks of material encircling them can be seen near the Trapezium stars. Protoplanetary disks, also known as (proplyds) are too small to be seen distinctly and the disks are the foundation of solar systems.

The Cone Nebula is a monstrous creation, which resembles a nightmare beast flaring up from a crimson sea, is simply a benevolent pillar of gas and ashes. The Cone Nebula is so identified because it has a conical appearance in ground-based photographs. This massive pillar is located in a tumultuous star-forming area with gnarled mountainpeak of cold gas and dust is visible.

Answer:

They maintain stable concentrations

Explanation:

Just took the test.

The statement describes the molecules and a reaction once it reaches equilibrium: they maintain stable concentrations, which is option A as the When a chemical reaction reaches equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction.

Equilibrium is a dynamic state, meaning that the reaction is still ongoing but the rates of the forward and reverse reactions are equal. This means that molecules are still reacting with each other, but at a constant rate, so that the concentrations of the reactants and products remain stable. When a reaction is not at equilibrium, the concentrations of the reactants and products change as the reaction progresses. However, once equilibrium is reached, the concentrations of the reactants and products no longer change, but the individual molecules are still moving and reacting with each other.

Hence, The statement describes the molecules and a reaction once it reaches equilibrium: they maintain stable concentrations, which is an option. A 

Learn more about equilibrium here.

https://brainly.com/question/19324885

#SPJ5

Answer:

That is equal to R1 + R2. If three or more unequal (or equal) resistors are connected in series then the equivalent resistance is: R1 + R2 + R3 +…, etc. One important point to remember about resistors in series networks to check that your maths is correct.

Answer:

[tex]2\:\mathrm{m/s^2}[/tex]

From Newton's 2nd Law, we have [tex]\Sigma F=ma[/tex]. Substituting given values, we have:

[tex]40=20a,\\a=\frac{40}{20}=\boxed{2\:\mathrm{m/s^2}}[/tex]

Answer:

The maximum rate at which the magnetic field strength is changing if the magnetic field is oriented perpendicular to the plane in which the loop lies 0.398 T/s.

Explanation:

Given;

radius of the circular loop, r = 2.0 m

maximum induced emf, E = 5.0 V

The emf induced in a magnetic field is given as;

[tex]emf = \frac{d\phi}{dt} \\\\\phi = AB\\\\emf = A\frac{dB}{dt} \\\\\frac{dB}{dt} = \frac{emf}{A} \\\\where;\\A \ is \ the \ area \ circular \ l00p = \pi r^2 = \pi (2)^2 = 4\pi \ m^2\\\\\frac{dB}{dt} = \frac{5}{4\pi} \\\\\frac{dB}{dt} = 0.398 \ T/s[/tex]

Therefore, the maximum rate at which the magnetic field strength is changing if the magnetic field is oriented perpendicular to the plane in which the loop lies 0.398 T/s.

Answer:

Cold

Explanation:

Im pretty sure im sorry if I am wrong

Answer:

d. conduction ​

Explanation:

Conduction involves the transfer of electric charge or thermal energy due to the movement of particles. When the conduction relates to electric charge, it is known as electrical conduction while when it relates to thermal energy, it is known as heat conduction.

In the process of heat conduction, thermal energy is usually transferred from fast moving particles to slow moving particles during the collision of these particles. Also, thermal energy is typically transferred between objects that has different degrees of temperature and materials (particles) that are directly in contact with each other but differ in their ability to accept or give up electrons.

Any material or object that allow the conduction (transfer) of electric charge or thermal energy is generally referred to as a conductor. Conductors include metal, steel, aluminum, copper, frying pan, pot, spoon etc.

In conclusion, conduction typically involves the transfer of heat energy by direct contact between two or more conductors such as a pot and electric cooker.

Answer:

d. conduction ​

Explanation:

Conduction is the transfer of energy from one molecule to another by direct contact.

Answer:

Explanation:

From the given information:

The missing value are as follows:

The velocity  [tex]v ^{\to} = (2.0 \times 10^6 \ m/s) \hat i + (3.0 \times 10^6 \ m.s) \hat j[/tex]

The uniform magnetic field [tex]B^{\to} = (0.030 T)\hat i -(0.15 T) \hat j[/tex]

The force on electron as a result of the Magnetic field is:

[tex]F^\to = q(v^\to \times B^\to)[/tex]

here;

Change of electron [tex]q = -1.6 \times 10^{-19} C[/tex]

Then,

[tex]v^{\to} \times B^{\to} = \left|\begin{array}{ccc}2\times10^6&3\times 10^6&0\\0.03&-0.15&0\end{array}\right|[/tex]

[tex]= \hat i(0-0) -\hat j ( 0-0) +\hat k (-3\times 10^5 -0.9\times 10^5) \\ \\ =-3.9 \times 10^5 \ k[/tex]

∴

[tex]F^\to = q(v^\to \times B^\to)[/tex]

[tex]F^{\to} = -1.6 \times 10^{-19} \times -3.9 \times 10^5 \\ \\ F^{\to} = 6.24 \times 10^{-14 } \ N[/tex]

For the proton with the same velocity:

[tex]q = 1.6 \times 10^{-19 } \ C \\ \\ F = q (v^\to * B^\to) \ \\ \\ F^\to = q(-3.9 \times 10^5) \\ \\ F = (1.6 \times 10^{-19}) (-3.9 \times 10^5) \\ \\ \mathbf{F ^{\to} = -6.24 \times 10^{-14} \ N}[/tex]

Answer:

The answer is first one 1...

Answer:

377 nm

Explanation:

Number of lines per meter is, [tex]N &=530 \times 1000 \\ &=530000 \text { lines } / \mathrm{m} \end{aligned}[/tex]

Grating element is, [tex]d=\frac{1}{N}[/tex]

[tex]=1.8868 \times 10^{-6} \mathrm{~m}[tex]

Order is, n=5

Condition for maximum intensity is, [tex]d \sin \theta=n \lambda[/tex]

 [tex]\lambda &=\frac{1.8868 \times 10^{-6}}{5(\sin 90)} \\ &=0.377 \times 10^{-6} \mathrm{~m} \\ &=377 \mathrm{~nm}[/tex]

Answer:

The answer is "[tex]15.38\%[/tex]"

Explanation:

Background[tex]= 13 \ mv\\\\[/tex]

corrected signal[tex]= 91 \ mv-13\ mv= 78\ mv\\\\[/tex]

with attenuator[tex]=25\ mv-13\ mv= 12\ mv\\\\[/tex]

[tex]\to \frac{p_t}{p_i}=\frac{12}{78}\times 100= 15.38\%[/tex]

The correct option is E. Increase her speed​

High-diving is the process or way in which a person jump into water  or swimming pool from a higher heights.

A Diver  is a person who dive or Fall into a water from a top board or diving board .

Therefore she was curving her body from the top board in order to Increase her speed​ which will enable her to spin or flip more faster.

Inconclusion The correct option is E. Increase her speed.

Learn more about Diving here:

https://brainly.com/question/2784286

Answer:

Explanation:

Rate of volume flow at two points will be same at two points .

A₁ V₁ = A₂V₂

A₁ and A₂ are area of cross section at two points and V₁ and V₂ are velocities .

A₁ = 18.2 x 3.55 = 64.61 m²

V₁ = 2 .55 x 10⁻² m/s

A₂ = 16.3 x d = 16.3 d  m²

d is depth at second point .

V₂ = 11.6 x 10⁻² m/s

64.61 m² x 2 .55 x 10⁻² m/s = 16.3 d  m² x 11.6 x 10⁻² m/s

d = .87 m

so canal is .87 m deep.

Answer:

[tex]F=1.159[/tex]

Explanation:

From the question we are told that:

Mass of pulley [tex]M=1kg[/tex]

Radius [tex]r=12cm[/tex]

Mass of block A [tex]M_a=2.1kg[/tex]

Mass of block B [tex]m_b=4.1kg[/tex]

Spring constant[tex]\mu= 358 J/m2[/tex]

Generally the equation for Torque is mathematically given by

Since [tex]\sumF=ma[/tex]

At mass A

 [tex]T_2-f_3=2.1a[/tex]

At mass B

 [tex]4.8-T_1=4.1a[/tex]

At  Pulley

 [tex]R(T_1-T_2)=\frac{1*1*R^2}{2}\frac{a}{R}[/tex]

 [tex]R(T_1-T_2)=0.55a[/tex]

Therefore the equation for total force F

At mass A+At mass B+At  Pulley

 [tex](T_2-f_3+4.8-T_1+R(T_1-T_2)=2.1a+4.1a+0.55a[/tex]

 [tex](T_2-f_3+4.8-T_1+R(T_1-T_2)=2.7a+4.8a+0.55a[/tex]

 [tex]-f_3+4.1=6.75a[/tex]

 [tex]-f_3=6.75a+4.8[/tex]

Since From above equation

[tex]M_{eff}=6.7kg[/tex]

Therefore

[tex]T=2\pi \sqrt{{\frac{M_{eff}}{k}}[/tex]

[tex]T=2\pi \sqrt{{\frac{6.75}{\mu}}[/tex]

[tex]T=0.862s[/tex]

Generally the equation for frequency is mathematically given by

[tex]F=\frac{1}{T} \\F=\frac{1}{0.862}[/tex]

[tex]F=1.159[/tex]

Answer:

♕ [tex]\large{ \red{ \tt{Step - By - Step \: Explanation}}}[/tex]

☃ [tex] \underline{ \underline{ \blue{ \large{ \tt{G \: I \: V \: E\: N}}}}} : [/tex]

♨ [tex] \underline {\underline{ \orange{ \large{ \tt{T \: O \: \: F \: I \: N\: D}}}} }: [/tex]

☄ [tex]\underline{ \underline{ \large{ \pink{ \tt{S\: O \: L \: U \: T\: I \: O \: N}}}}}: [/tex]

✧ [tex] \red{ \boxed{ \large{ \purple{ \sf{Wave \: velocity(v) = Frequency(f) \times Wavelength(λ)}}}}}[/tex]

~Plug the known values and then multiply!

↦ [tex] \large{ \tt{7 \times 42}}[/tex]

↦ [tex] \boxed{ \boxed{ \large{ \bold{ \tt{294 \: m {s}^ {- 1} }}}}}[/tex]

☥ [tex] \large{ \boxed{ \boxed{ \large{ \tt{Our \: Final \: Answer : \underline{ \large{ \tt{294 \: m {s}^{ - 1}}}}}}}}} [/tex]

---------------------------------------------------------------

❁ [tex] \underline{ \large{ \red{ \tt{D\: E\: T \: A \: I \: L\: E \: D \: \: I\: N \: F \: O}}}} : [/tex]

# KILL : Excuses

KISS : Opportunities

MARRY : Goals

♪ Hope I helped! ♡

☂ Have a wonderful day / night ! ツ

✎ [tex] \underbrace{ \overbrace{ \mathfrak{Carry \: On \: Learning}}}[/tex] ✔

▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁

Answer:

D More: Less

Explanation:

ADHD is triggered more by genetic and neurological factors and less by social or environmental ones.

ADHD is one of the most common neurodevelopmental disorders of childhood. It is usually first diagnosed in childhood and often lasts into adulthood. Children with ADHD may have trouble paying attention, controlling impulsive behaviors (may act without thinking about what the result will be), or be overly active.

Moreover, ADHD tends to run in families and, in most cases, it's thought the genes you inherit from your parents are a significant factor in developing the condition. Research shows that parents and siblings of someone with ADHD are more likely to have ADHD themselves.

Therefore, adults with attention deficit hyperactivity disorder (ADHD or ADD) lead anxious lives. The nature of ADHD often makes day-to-day life stressful, creating situations and environments fraught with uncertainty – anxiety's primary fuel.

Learn more about ADHD:

https://brainly.com/question/13719580

#SPJ2

Electricity is just the flow of electrons or charges from a point of production through a conductor, to another point where it can be utilized or converted to another form of energy.

Magnetism is the force exerted by magnets when they attract or repel each other. Magnetism is caused by the motion of electric charges from two or more magnetic substances.

Answer:

By Electricity.. We mean the Flow of electrical power or Charge.

While Magnetism is a phenomenon that occurs from or by the Motion of Charges

Answer: how the government and teachers can address or help students experiencing stress and anxiety.

Explanation:

Answer: 0.75 W

Explanation:

Given

Current flowing [tex]I=0.5\ A[/tex]

The first flashlight has a single 1.5 V battery

The second flashlight has three 1.5 V batteries connected to provide 4.5 V

Power is the product of voltage and current.

For the first flashlight

[tex]\Rightarrow P=1.5\times 0.5\\\Rightarrow P=0.75\ W[/tex]

Thus, the first flashlight providing 0.75 W of power.

Answer:

Explanation:

b) light

Answer:

a. hydroelectric power plant

Answer:

E = 124.7 N / C

Explanation:

Let's analyze the exercise: the microwave creates an electromagnetic wave of frequency F = 2.45 GHz, this wave is introduced into the microwave cavity and is reflected on the metal walls, which is why one or more standing waves are formed.

The electric field of the standing wave is

            I = E²

            E =√I

where I is the intensity of the radiation.

What is it

             I = P / A

where P is the effective emission power, almost all the power of the microwave and A is the area of ​​the cavity, in the most used microwaves

P = 700 W and the area is A = 25 x 18 cm² = 0.045 m²

             I = 700 / 0.045

             I = 15555.56 W/m²

let's calculate the electric field

            E = √15555.56

            E = 124.7 N / C

Answer:

Metals that do not contain traces or large proportions of iron in them are called Non-Ferrous metals.

Answer:

F = 47261.5 N = 47.26 KN

Explanation:

First, we will calculate the deceleration of the bullet by using the third equation of motion:

[tex]2as = v_f^2-v_i^2[/tex]

where,

a = deceleration = ?

s = distace covered = 5.2 cm = 0.052 m

vf = final speed = 0 m/s

vi = initial speed = 640 m/s

Therefore,

[tex]2(a)(0.052\ m) = (0\ m/s)^2-(640\ m/s)^2\\\\a = -\frac{409600\ m^2/s^2}{0.104\ m}\\\\a=-3938461.5\ m/s^2[/tex]

negative sign shows deceleration.

Now for the force, we will use Newton's Second Law of Motion:

F = ma

where,

F = Force = ?

m = mass of bullet = 12 g = 0.012 kg

Therefore,

F = (0.012 kg)(3938461.5 m/s²)

F = 47261.5 N = 47.26 KN

The sum of the resistance = 2 ohms x 80 lights = 160 ohms.

Current = Total voltage / total resistance:

Current = 120V / 160 ohms

Current = 0.75 Amps