Answer:
i think it b
Explanation:
if right can i have brainly
Elijah wants to make some changes to a game that he is creating. Elijah wants to move the bleachers to the right, the coaches to the left, and the players to the center. What does Elijah want to change in the game?
the interface
the variable
the conditional loop
the editor
help soon pls-
Answer:
the editor
Explanation:
i got it right on the quiz!!!!!
hope this helps
Which is equal to a temperature of 50°F?
18°C
46°C
10°C
32°C
Answer:
10°C degrees po ang sagot
The converted temperature in Fahrenheit to Celsius is "10°C", and the calculation can be defined as follows:
Fahrenheit to Celsius temperature calculation:
Temperature is indeed a unit of measurement for hotness or coldness that can be represented in Fahrenheit or Celsius.
The temperature in Fahrenheit = 50°F
Formula to convert the temperature:
⇒ C = [tex]\frac{5}{9}[/tex] × (F-32)
= [tex]\frac{5}{9}[/tex] × (50-32)
= [tex]\frac{5}{9}[/tex] × (18)
= 5× (2)
= 10°C
Therefore, the converted temperature is "10°C".
Find out more about the temperature here:
brainly.com/question/11464844
Which of the following factors put you at risk for injury?
Select the 3 answer options that apply.
Repetitive motions
Prolonged exposure to vibration
Long periods of localized pressure
Neutral postures
Answer:
repetitive motion prolonged exposure long periods of pressure
In a case where electrical current leakage from the circuit occurs, the GFCI would do the following:
Place the options in the correct order.
Trip the circuit
Cut off the electricity
Sense the current leakage
Answer:
Sense the current leakage
Trip the circuit
Cut off the electricity
Explanation:
The correct order is -
Sense the current leakage
Trip the circuit
Cut off the electricity
Reason -
First step has to be taken to sense the electric current leakage without it being detected, it cant be dealt with.
The second step consists of tripping the circuit so at to remove the flow of electricity.
The third step is to Cut the electricity off so to stop the leakage and be safe.
Automatic transmissions generate a lot of heat. Which of the following is true?
a
Excessive heat shortens the life of the transmission.
b
Excessive heat is recaptured and converted to electricity.
c
Excessive heat lengthens the life of the transmission.
d
Excessive heat is used to warm the passenger’s cabin.
A- Excessive heat shortens the life of the transmission.
Once the car is moving, the automatic transmission fluid (ATF) heats up quite quickly. The typical temperature range at which most fluids are meant to operate is 175 degrees F, which is raised by normal driving. Thus, option A is correct.
What Automatic transmissions generate a lot of heat?The torque converter is where most heat is produced. The link between the engine and the automatic transmission is provided by the torque converter. Additionally, it is made to slip like a clutch, allowing the car to stop moving while the engine is still running.
Additionally, an automatic transmission's torque converter generates a lot of heat. The majority of slide occurs at stationary, therefore this mostly happens then. On the other hand, a malfunctioning lookup clutch can permit the torque converter to keep slipping while driving, producing an excessive amount of heat.
Therefore, Excessive heat shortens the life of the transmission.
Learn more about transmissions here:
https://brainly.com/question/13142496
#SPJ2
define the branches of engineering with work field?
In broad terms, engineering can be divided into four main categories – chemical, civil, electrical and mechanical engineering
Jogar bola ajuda em que?
Answer:
se você quer dizer "bola" como no basquete, os benefícios de jogar basquete são uma enorme quantidade de resistência mental e física e habilidades exigidas de cada jogador
Explanation:
Answer:
ajuda na coordenação motora
Explanation: :)
Question 150 (1 point)
The only difference between an isometric drawing and an isometric projection is the
O terminology
representation
Size
both a and 6
(0)
none of the above
Previous Page
Next Page
Answer:
terminology
is the right answer
hope this is helpful
Assuming the vertical sensitivity control is set to 0.5 volts per division, and the timebase control is set to 2.5 ms per division, calculate the amplitude of this sine wave in volts peak
Answer:
Amplitude of sine wave in volts peak = 2.25 V
Explanation:
Given:
Vertical sensitivity control = 0.5 volts per division
Time base control = 2.5 ms per division
Find:
Amplitude of sine wave in volts peak
Computation:
Amplitude of sine wave in volts peak = 4¹/₂[volts per division]
Amplitude of sine wave in volts peak = 4¹/₂[0.5]
Amplitude of sine wave in volts peak = 4.5[0.5]
Amplitude of sine wave in volts peak = 2.25 V
When trying to determine plumb or level, the
contact the surface
of the level should
1 face
2 edge
3 end
4 all the above
What reading will a digital multimeter indicate, when set to the 4A scale, if the actual current flow is 200mA?0.002 A
0.020 A
0.200 A
2.000 A
Answer:
Current flow in ampere according to 4A scale = 0.2 Ampere
Explanation:
Given;
Current flow = 200 milliampere
Find:
Current flow in ampere according to 4A scale
Computation:
We know that
1 ampere = 1,000 milliampere
So,
1 milliampere = 1/1,000 ampere
Current flow = 200 milliampere
Current flow = 200[1/1,000]
Current flow = 200[0.001]
Current flow = 0.2
Current flow in ampere according to 4A scale = 0.2 Ampere
28. What is the value of a resistor in a series circuit if you measure 0.5 amps flowing through it and 15 volts
across it?
29
A lightbulb using 120 V and 1 A is using how many watts?
hing
tarm with the correct definition