The block A and attached rod have a combined mass of 50 kg and are confined to move along the guide under the action of the 796-N applied force. The uniform horizontal rod has a mass of 15 kg and is welded to the block at B. Friction in the guide is negligible.
Required:
Compute the bending moment M exerted by the weld on the rod at B. The bending moment is positive if counterclockwise, negative if clockwise.
Answers
Answer:
The bending moment is 459.16 N.m
Explanation:
From the given information;
Let's assume that the angle is 66°
Then, the free body diagram is draw and attached in the file below.
Now, the calculation of the acceleration from the first part of the free body diagram is:
[tex]\sum F_x = ma_x \\ \\ 796 - 50(9.81) sin 66=50a \\ \\ 796 - 448.094 = 50 a \\ \\ a = \dfrac{347.906}{50} \\ \\ a = 6.96 \ m/s^2[/tex]
Bending moment M:
From the second part of the diagram:
[tex]\sum M_B = mad \\ \\ M - (15 \times 9.81) (1.5) = (25 \times 6.96)(1.5 sin 66) \\ \\ M - 220.725 = 238.435 \\ \\ M = 238.435 + 220.725 \\ \\ \mathbf{M = 459.16 \ N.m}[/tex]
Related Questions
find the total electric field along the line of two of the two charges shown in figure at the point midway between them
Answers
.
Photons with the highest frequency have the lowest _____.
A. wavelength
B. speed
C. color
D. energy
Answers
Answer:
a wavelength
Explanation:
The period of a sound wave coming from an instrument is 2 seconds. What 1 point
is the frequency of the sound? (f = 1/T) *
5 Hz
50 Hz
ОО
0.5 Hz
Answers
Answer:
b
Explanation:
Do all the cells look the same in a filament? If there is a difference, describe
how they are different.
Answers
Answer:
All cells in filamentous algae look the same except for the spores. Explanation:
Man-made climate change is an example
of...
Answers
I got this from a book please do not copy it will be plagiarism. If helped mark me the brainiest!!!
You are playing in a volley ball game Your team has 12 and the other team has 18.
How many points does your team needs to win?
How many points does the other team needs to win?
Answers
Answer:
you need 7 points and the other team just needs to stop you from scoring
Explanation:
The maximum allowable resistance for an underwater cable is one hundredth of an ohm per
meter and the resistivity of copper is 1.54 x 10-80m.
a) Calculate the smallest cross sectional area of copper cable that could be used.
Answers
Answer:
A = 1.54 x 10⁻⁵ m² = 15.4 mm²
Explanation:
The resistance of a wire can be given by the following formula:
[tex]R = \frac{\rho L}{A}\\\\A = \frac{\rho L}{R} = \frac{\rho}{\frac{R}{L} }[/tex]
where,
A = smallest cross-sectional area = ?
ρ = resistivity of copper = 1.54 x 10⁻⁸ Ωm
[tex]\frac{R}{L}[/tex] = resistance per unit length of wire = 0.001 Ω/m
Therefore,
[tex]A = \frac{1.54\ x\ 10^{-8}\ \Omega m}{0.001\ \Omega/m}[/tex]
A = 1.54 x 10⁻⁵ m² = 15.4 mm²
Two-fifths of a number is 23.2, find
the number.
A. 116.0
B. 58.0
C. 46.4
D. 29.0
E. 14.5
11
Answers
Considering the definition of an equation and the way to solve it, the correct answer is option B.: the number is 58.
Definition of equationAn equation is an algebraic equality in which letters (unknowns) appear with unknown value in addition to certain known data.
An equation has:
The members, which are each of the expressions that appear on both sides of the equal sign.The terms, which are the addends that form the members of an equation.The solution of an equation is to find the value of the unknown or unknowns that verify the equality. To solve an equation, keep in mind:
When a value that is adding, when passing to the other member of the equation, it will subtract.If a value you are subtracting goes to the other side of the equation by adding.When a value you are dividing goes to another side of the equation, it will multiply whatever is on the other side.If a value is multiplying it passes to the other side of the equation, it will pass by dividing everything on the other side.This caseBeing "x" the number you want to find and knowing that two-fifths of a number is 23.2, the equation in this case is:
2/5x= 23.2
Solving:
x= 23.2 ÷ 2/5
x= 58
Finally, the number is 58.
Learn more about equations:
brainly.com/question/20796784
brainly.com/question/565552
brainly.com/question/4983716
#SPJ1
Answer the following question according to formal grammatical rules.
Which of the following sentences corrects the pronoun errors in this sentence?
If a person wants to help their community, they should research opportunities.
A. If a person wants to help their community, you should research opportunities.
B. If you want to help your community, a person should research opportunities.
C. If people want to help their community, they should research opportunities.
D. If a person wants to help it, they should research opportunities.
Answers
If people want to help their community, they should research opportunities corrects the pronoun errors in this sentence.
What is a Pronoun?This is defined as a word which is used instead of a noun and examples include he, she etc.
In this scenario, the word 'people' agrees with the possessive adjective 'their' and the personal pronoun 'they', which is referred to the third-person plural hence the reason why option C is the most appropriate choice.
Read more about Pronoun here https://brainly.com/question/26257764
Answer:
D
Explanation:
D
Red light of wavelength 633 nm from a helium-neon laser passes through a slit 0.370 mm wide. The diffraction pattern is observed on a screen 3.70 m away. Define the width of a bright fringe as the distance between the minima on either side. You may want to review (Page) . For related problem-solving tips and strategies, you may want to view a Video Tutor Solution of Single-slit diffraction. Part A What is the width of the central bright fringe
Answers
Answer:
Δx = 6.33 x 10⁻³ m = 6.33 mm
Explanation:
We can use the Young's Double Slit Experiment Formula here:
[tex]\Delta x = \frac{\lambda L}{d}\\\\[/tex]
where,
Δx = distance between consecutive dark fringes = width of central bright fringe = ?
λ = wavelength of light = 633 nm = 6.33 x 10⁻⁷ m
L = distance between screen and slit = 3.7 m
d = slit width = 0.37 mm = 3.7 x 10⁻⁴ m
Therefore,
[tex]\Delta x = \frac{(6.33\ x\ 10^{-7}\ m)(3.7\ m)}{3.7\ x \ 10^{-4}\ m}[/tex]
Δx = 6.33 x 10⁻³ m = 6.33 mm
Two identical thermally insulated spherical tanks, A and B, are connected by a valve. Initially tank A contains 20mol of an ideal diatomic gas, tank B is evacuated, and the valve is closed.
If the valve is opened and the gas expands isothermally fromA to B, what is the change in the entropy of the gas?
Answers
Answer:
Explanation:
Volume of gas is doubled isothermally . Let the temperature of the gas be T .Work done by the gas
W = 2.303 nRT log 2 V / V
Since expansion is isothermal , Δ E = 0
Q = ΔE + W
Q = W
Q = 2.303 nRT log 2 V / V
Q / T = 2.303 n R log 2
Change in entropy = ΔS = Q / T = 2.303 n R log 2
= 2.303 x 20 x 8.3 x .3010 J T⁻¹.
= 115 J T⁻¹.
The required change in the entropy of the gas is 115 J/K.
Given data:
The number of moles of diatomic gas in tank A is, n = 20 mol.
The expansion takes place isothermally, which means the volume is doubled at the constant temperature. Therefore, work done during the isothermal expansion is,
W = 2.303 nRT log 2 V / V
Since expansion is isothermal , Δ E = 0. Then by using the first law of thermodynamics as,
Q = ΔE + W
Q = W
Q = 2.303 nRT log 2 V / V
Q / T = 2.303 n R log 2
Also, we that the expression for the change in Entropy is,
ΔS = Q / T = 2.303 n R log 2
Solving as,
ΔS = 2.303 x 20 x 8.3 x .3010
ΔS = 115 J/K
Thus, we can conclude that the required change in the entropy of the gas is 115 J/K.
Learn more about the entropy change here:
https://brainly.com/question/1301642
A 200kg car is driving at 20m/s down the road when he sees a red light. He slows to a stop.
The car's initial momentum is ___kg m/s
The car's final momentum is ___kg m/s
The car's impulse is
___kg m/s
Answers
Answer:
Initial Momentum - 4000 kg*m/s
Final Momentum - 0 kg*m/s
Impulse: -4000 kg*m/s
Explanation:
The equation for momentum is P = mv
Initial Momentum
200kg * 20m/s = 4000 kg*m/s
Final Momentum
200kg * 0m/s = 0kg*m/s
Impulse = ΔP
Pfinal - Pintial = Impulse
0-4000 = -4000 kg*m/s
In A. C. motor capacitor is used
p.Can dicouly [BPKIHS 2000
to reduce ripples b. to decrease A. C.
c. to increase A. C. d. to decrease D. C.
a.
34
Answers
Answer:
d. to decrease D. C.
Explanation:
d. to decrease D. C.
An automobile traveling at a speed of 28.3 m/s applies its brakes and comes to a stop in 4.9 s. If the automobile has a mass of 1.1 x 103 kg, what is the average horizontal force exerted on it during braking? Assume the road is level.
Find Magnitude and direction
WILL GIVE BRAINLIEST
Answers
Answer:
i say it would be 32.5 m if the brakes comes and stops. the road is 3.7 x 105
Explanation:
Which of the following best defines climate? PLEASE HELP!!
Answers
Electroconvulsive therapy would be done under the
supervision of a counseling psychologist, where high level
of electric shock would be admistered.
Select one:
True
False
Answers
Answer:
the answer of this question is true
1The specific heat of substance (X) is greater than that for substance (Y). If equal amounts of heat are added to both these substances, the one reaching the higher temperature(assuming no phase change occurs for either) will be:
1. substance X
2. substance Y
3.there will be no difference in the final temperature.
4.both X and Y
Answers
Answer:
Substance Y
Explanation:
A substance with a high specific heat capacity can absorb a large quantity of heat before it will raise in temperature. A substance with a low specific heat requires relatively little heat to raise its temperature. Thus, if the same amount of energy was added to both substances, substance Y will reach the higher temperature, while substance X would require more energy to reach high temperatures.
Answer:
2. substance Y
Explanation:
specific heat is how much heat is needed to warm up something. Y has smaller specific heat means it warm up more w/ same amount of heat.
1-Autotrophic plants are also called
2-The ____ guards the opening and closing of stomata
3-_______ is an example of a nitrogen fixing bacterium
4______ plants has the biggest and the heaviest flower
5-a tissue called _____bcarries water and minerals from the root to the root to the leaves of plants
Answers
Answer:
1. Producers
2. cell (guards)
3. Rhizobium
4. Rafflesia Arnoldii
5. Xylem
Two band members are marching toward each other beginning from opposite end zone goal lines (100 yards apart). One band member is playing a picolo and marching at 5 ft/s and the other is playing a sousaphone and marching at 1 ft/s. At what yard line do they meet?
Answers
Answer:
17
Explanation:
answer is 16.6666 which is equal to 17
An astronaut is a distance L from her spaceship, and is at rest with respect to the ship, when she discovers that her tether has broken. She tosses a wrench with a speed Vw in the opposite direction of the ship to propel herself back to the ship. The astronaut has mass MA, and the wrench has mass Mw.
Required:
a. Draw a sketch, showing the subsequent motion of the astronaut and the wrench.
b. What is the initial momentum (before toss) of the astronaut plus wrench system? What is the final momentum?
c. Use conservation of momentum to solve for the speed of the astronaut VA, relative to the ship, in terms of MA, Mw and Vw.
d. How long does it take her to reach the ship in terms of L, MA, Mw and Vw?
e. How far has the wrench traveled from its original position when the astronaut reaches the ship? Express your answer in terms of L, MA and Mw.
Answers
Answer:
B) I₀ = I_f= 0, C) vₐ = [tex]\frac{m_w}{m_a} \ v_w[/tex] , D) t = [tex]\frac{m_a}{m_w} \ \frac{L}{v_w}[/tex]
Explanation:
A) in the attachment you can see a diagram of the movement of the key and the astronaut that is in the opposite direction to each other.
B) Momentum equals the change in momentum in the system
I = ∫ F dt = Δp
since the astronaut has not thrown the key, the force is zero, so the initial impulse is zero
I₀ = 0
The final impulse of the two is still zero, since it is a vector quantity, subtracting the impulse of the two gives zero, since it is an isolated system
I_f = 0
C) We define the system formed by the astronaut and the key, for which the forces during the separation are internal and the moment is conserved
initial instant.
p₀ = 0
final instant
p_f = [tex]m_a v_a - m_w v_w[/tex]
We used the subscript “a” for the astronaut and the subscript “w” for the key
the moment is preserved
po = p_f
0 = mₐ vₐ - m_w v_w
vₐ = [tex]\frac{m_w}{m_a} \ v_w[/tex]
D) as the astronaut goes at constant speed we can use the uniform motion relationships
vₐ = x / t
t = x / vₐ
t = [tex]\frac{m_a}{m_w} \ \frac{L}{v_w}[/tex]
When a species has no members left that are alive
Answers
Answer:
it means that species is extinct.
Explanation:
have a good day :)
what must happen for a electromagnet to have a magnetic field
Answers
Who serves as the presiding officer of the Senate?
Answers
Who serves as the presiding officer of the Senate?
[tex]{ \bf{ \underbrace{Answer :}}}[/tex]
The [tex]\sf\purple{Vice\:President}[/tex] of the United States serves as the presiding officer of the Senate.
At present, [tex]\sf\red{Kamala\:Harris}[/tex] is the president of the Senate.
[tex]\bold{ \green{ \star{ \orange{Hope\:it\:helps.}}}}⋆[/tex]
Light of intensity I0 passes through 4 ideal polarizing sheets. Unpolarized light enters the 1st sheet that has a horizontal transmission axis. Light continues to the 2nd sheet that has its transmission axis at 25 degrees with respect to the 1st sheet, then to the 3rd sheet that has its transmission axis at 47 degrees with respect to the 1st sheet then to the 4th sheet that has its transmission axis at 10 degrees with respect to the 3d sheet. The intensity of the emerging light as percentage of I0 is close to:
Answers
Answer:
34.24 %
Explanation:
Since I₀ is the intensity of the un-polarized light, the intensity I₁ of the light polarized by the 1st sheet is (by the one-half rule) I₁ = I₀/2.
The intensity of polarized light I from a polarized source I' is I = I'cos²Ф where Ф is the angle between the direction of I' and I. Since the second sheet has its transmission axis at 25° with respect °o the 1st sheet, the intensity of light I₂ from the second sheet is I₂ = I₁cos²25°.
Also, the 3rd sheet has its transmission axis 47° with respect to the 1st sheet. So, the angle between the transmission axis of the 2nd sheet and 3rd sheet is 47° - 25° = 22°. So, the intensity I₃ from the 3rd sheet is I₃ = I₂cos²22°
Finally, the 4th sheet has its transmission axis 10° with respect to the 3rd sheet. So, the intensity I₄ from the 4th sheet is I₄ = I₃cos²10°.
So, I₄ = I₃cos²10°
I₄ = I₂cos²22°cos²10°
I₄ = I₁cos²25°cos²22°cos²10°
I₄ = (I₀/2)cos²25°cos²22°cos²10°
I₄/I₀ = cos²25°cos²22°cos²10°/2
I₄/I₀ = (cos25°cos22°cos10°)²/2
I₄/I₀ = (0.9063 × 0.9272 × 0.9848)²/2
I₄/I₀ = 0.8275²/2
I₄/I₀ = 0.6848/2
I₄/I₀ = 0.3424
So, as a percentage,
I₄/I₀ × 100% = 0.3424 × 100% = 34.24 %
what is a transformer
Answers
Answer:
An electrical box that regulates all the electricity for an area.
An 800 kg charging bull rams through a wooden fence. It was travelling at
5 m/s, now it's travelling at 3 m/s. How much impulse did the bull
experience by smashing the fence?
Answers
Answer:
J = 1600 kg-m/s
Explanation:
Given that,
The mass of charging bull rams, m = 800 kg
Initial speed, u = 5 m/s
Final speed, v = 3 m/s
We need to find the impulse the bull experience by smashing the fence. Let it is J. We know that, impulse is equal to the change in momentum such that,
J = m(v-u)
Put all the values,
J = 800(3-5)
= 800(-2)
= -1600 kg-m/s
Hence, the magnitude of impulse is equal to 1600 kg-m/s.
A 10kg block is Pulled along a horizontal
Surface by a force
of 50N at an angles
of 37° with the horizontal If the
coefficient of sliding friction b/n the
block and the surface is o.2
(g=10m/s^2 Sin 37=O.6 and cos 37 = 0.8)
A, what frictional forces acting on the block?
B,what is the acceleration of the block?
Answers
Answer:
hope u can understand the method
if a car travels 125 miles in 2.5 hours, what was the cars average speed over the 2.5 hours?
Answers
Answer:
50 miles per hour
Explanation:
125/2.5 which equals to 50
Answer:
50 miles per hour
Explanation:
125 divided by 2.5 = 50
Which is the best way to become familiar with your company's policies and procedures?
O
A. ask the person who hired you
O
B. look in the employee handbook
C. tell your supervisor you need help
D. visit the company's website
Answers
Which of the following is a category of mechanical wave?
O A. Transverse
B. Frictional
C. Parallel
D. Perpendicular
Answers
Answer:
a
because the mechanical wave is when it goes over and over again
Answer:
The answer is a like i said 3hrs ago i dont know if this guy copied me tbh
Explanation: