The above reaction is a spontaneous reaction as E0cell>0 and the reaction proceeds spontaneously.
What is electromotive potential?
The terminal potential difference, also known as EMF or electromotive force, occurs when no current flows.
The half reactions of the equation being
Zn (s) → Zn2+ (aq) + 2e- oxidation half-reaction (Zn2+ (aq) + 2 e- → Zn (s) -0.76)
Cu2+ (aq) + 2e- → Cu (s) reduction half reaction (Cu2+ (aq) + 2 e- → Cu (s) +0.34)
E°oxid=- E°red= +0.76V
The chemical reaction occurs spontaneously, and an electron participates in it.
Therefore the above reaction is a spontaneous reaction as E0cell>0 and the reaction proceeds spontaneously.
To know more about electromotive potential from the given link
https://brainly.com/question/24142403
#SPJ4
A sample of oxygen was collected in a tube over water. In the tube, there is a mixture of oxygen gas and gaseous water (steam). The total pressure of the gas mixture is 760. Torr. If the pressure of gaseous water is 23. 8 torr, what is the pressure of the pure oxygen?.
The ideal gas law exhibits the relationship between the pressure and the volume of the gas. The pressure of the pure oxygen in the sample will be 736.2 torrs.
A theoretical gas called an ideal gas is one that has lots of point particles flying around arbitrarily and not being affected by other particles. The ideal gas notion is advantageous because it complies with the ideal gas law, a condensed equation of state, and is amenable to statistical mechanics analysis. A theoretical gas called an ideal gas is one that has many of randomly moving particles but doesn't have any interparticle interactions. The converse is true for a real gas; it takes up space and its molecules interact. As a result, PV is always equal to nRT.
Learn more about ideal gas here:
https://brainly.com/question/28257995
#SPJ4
using the solubility rules, predict the identity of the precipitate that forms when aqueous solutions of bacl2 and k2so4 are mixed by writing the balanced chemical equation for the reaction (make sure the states of all reactants and products are shown).
The precipitate that will be formed at the end of the reaction would be Barium sulphate.
Solubility is the new bond formation between the solute molecules and the solvent molecules. In terms of quantity, solubility is the maximum concentration of solute that dissolves in a known concentration of solvent at any given temperature.
We need to consider each ionic compound (both the reactants and the possible products) in light of the solubility rules. If a compound is soluble, we use the (aq) label with it, indicating that it dissolves. If a compound is not soluble, we use the (s) label with it and assume that it will precipitate out of solution
Barium chloride and potassium sulfate are both ionic compounds. We would expect them to undergo a double displacement reaction with each other.
BaCl2 + K2SO4 BaSO4 + 2 KCl
By examining the solubility rules we see that, while most sulfates are soluble, barium sulfate is not. Because it is insoluble in water we know that it is the precipitate. As all of the other substances are soluble in water we can rewrite the equation.
BaCl2(aq) + K2SO4(aq) BaSO4(s) + 2 KCl(aq)
To know more about precipitate
https://brainly.com/question/18109776
#SPJ4
A 0.296 g piece of solid magnesium reacts with gaseous oxygen from the atmosphere to form solid magnesiumoxade. In the laboratory a student weighs the mass of the magnesium acide collected from this reaction as 0.224 g The 0.296 g solid magnesium is the Choose one: O A actual yield o B theoretical yield o excess reagent • D. percent yield O E limiting reagen
If the mass of the magnesium oxide collected is 0.224 g then the 0.296g solid magnesium is E) Limiting reagent
Limiting reagent is a term used in chemistry to describe a reactant that is completely used up in a reaction in which it is involved and therefore this reagent determines when the reaction stops.
Magnesium burns brightly because the reaction releases a lot of heat. Because of this exothermic reaction, magnesium gives two electrons to oxygen, forming the product which is powdery magnesium oxide.
The reaction of magnesium with oxygen can be illustrated as follows;
[tex]2Mg + O_{2} ---- > 2MgO[/tex]
As per the reaction, 2 moles of magnesium react with 1 mole of oxygen therefore magnesium produces less magnesium oxide as compared to oxygen and thus is the limiting reagent in this reaction.
Although a part of your question is incorrect, you might be referring to this question:
A 0.296 g piece of solid magnesium reacts with gaseous oxygen from the atmosphere to form solid magnesium oxide. In the laboratory, a student weighs the mass of the magnesium oxide collected from this reaction as 0.224 g The 0.296 g solid magnesium is the
Choose one:
O A actual yield
O B theoretical yield
O C excess reagent
O D. percent yield
O E limiting reagent
To learn more about limiting reagents; click here:
https://brainly.com/question/26905271
#SPJ4
would decreasing the volume of the container for each of the following reactions cause the equilibrium to shift in the direction of the products, the reactants, or not change?
This leads to the decreasing the volume will shift equilibrium in the direction of products.
Chemical equilibrium is the condition in which the reactants and products are both present in concentrations that have no further tendency to change over time, preventing any discernible change in the system's properties. In a state of neutral equilibrium, when an external force is applied, the line connecting the earth's centre and the centre of gravity falls within the base of the body.
A product is anything that can be provided to a market in order to satiate a customer's need or desire. It can be an item, a system, or a service that is made accessible for consumer usage in response to consumer demand. An insurance policy is an example of an intangible product because it can only be understood through indirect perception.
learn more about equilibrium here
https://brainly.com/question/8983535
#SPJ4
a. Proceeding from left to right across a period of the periodic table, the elements become (more, less) metallic. b. Proceeding from top to bottom in a group of the periodic table, the elements become (more, less) --Consider the generic equation for the reaction of the halogens, X, and Y, X2(g) + 2Y-(aq) → 2X-(aq) + Y2(g) Is X2 or Y, the more reactive halogen? Explain.9. a. Experimental Procedure, Part B.2. What commercially available compound is used to generate Cl, in the experiment? b. Experimental Procedure, Part B. The observation for the presence of the elemental form of the halogens is in a sol- vent other than water. Identify the solvent. c. Experimental Procedure, Part E.3. Identify the tests used to observe the periodic Pertrends in the chemical properties of the alkaline-earth metal ions.
Moving from left to right across a period in the periodic table results in a decrease in metallic character. This happens because atoms are more willing to take electrons in order to fill a valence shell.
An electron in an atom's outer shell is known as a valence shell, and if the outer shell is open, the valence electron can take part in the formation of a chemical bond. One valence electron from each atom in the link is contributed to form a shared pair in a single covalent bond. The chemical characteristics of an element can be influenced by valence shell density.
The chemical elements are arranged in rows and columns on what is known as the periodic table, or table of the elements. It is commonly regarded as an icon of chemistry and is used extensively in physics, chemistry, and other sciences. Chemical properties of elements in the same group on the periodic table are similar.
learn more about valence shell here
https://brainly.com/question/20861869
#SPJ4
balance the following redox reaction if it occurs in basic solution. what are the coefficients in front of cr and cl2 in the balanced reaction? cr(s) + cl2(g)→ cr3+(aq) + cl-(aq)
The coefficients in front of the reactions are cr =2 and cl2 i= 3.
In chemistry, a solution is a special type of homogeneous mixture composed of two or greater materials. In this sort of mixture, a solute is a substance dissolved in another substance, called a solvent.
The solution is a homogeneous aggregate of 1 or extra solutes dissolved in a solvent. solvent: the substance in which a solute dissolves to supply a homogeneous aggregate. solute: the substance that dissolves in a solvent to produce a homogeneous combination.
The constituent debris of a solution is smaller than 10-9 meters in diameter. Constituent particles of a solution can not be visible to the eye. Solutions no longer scatter a beam of mild passing through it.
Learn more about the solution here:-https://brainly.com/question/17145398
#SPJ4
What is the symbol for hydrogen ion?
If exactly one molecule of solute is present in 1. 00 l of solution, what is the concentration of the solution?.
If there is exactly one molecule of solute in one liter of solution, the concentration is 66x10^-24 M.
What is molecule?The term might or might not include ions that fit this specification depending on the context. A molecule is a grouping of two or more atoms that are held together by the chemical bonds that act as attractive forces. Two or more atoms of the same or different element that are joined together to form a molecule are referred to as molecules. A molecule can be heteronuclear, which is a chemical compound made up of more than one element, like water, or homonuclear, which implies it is made up of atoms of one chemical element, like oxygen (O2) (H2O).
What is the formula of a molecule?Subtract the empirical formula mass from the molar mass of the compound. The outcome must be a whole number or a number that is very close to a whole number. Divide the whole number from step 2 by each subscript in the empirical formula. The molecular equation is the end result.
Briefing:A mole is defined as6.02x10^23 particles, or molecules in this case. Utilize this connection as a conversion factor:
(One mole/6.02x10^23 molecules)
When there is only one molecule present, use the following conversion factor to determine the solute's moles:
(1 molecule) / (1 mole) / (6.02x10^23 molecules) = 1.66 x 1024 moles.
When the molecules cancel, only moles are left.
The number of moles of a solute per liter is concentration by definition. Divide the 1.66x10^-24 moles by the 1.0L volume to get the following result:
1.66x10-241.66x10^-24 molar, or 1.66x10^-24 M, is the result of dividing 1.66x10^-24 moles of solute by 1.0 liter.
To know more about Molecule visit:
https://brainly.com/question/1446104
#SPJ4
under standard conditions, h ions at the standard hydrogen electrode (she) are capable of spontaneously oxidizing which of the following metals?
In all applications of the hydrogen electrode under standard circumstances, the metal hydrogen gas is formed.
What is hydrogen electrode?Redox half cell is the foundation of the hydrogen electrode: 2 H+(aq) + 2 e− → H2 (g) A platinum electrode with platinization is the site of this redox process. Pure hydrogen gas is bubbled through the electrode after it has been immersed in an acidic solution. Both the reduced form and the oxidised form's concentration are kept at unity. An electrode with an assigned potential of zero to which all other electrode potentials are referred for comparison is typically made of platinum black on platinum and is over which a stream of hydrogen is bubbled when certain conditions are met.
What is the use of hydrogen electrode?For measurements of electrode potential, the hydrogen electrode is utilised as a reference. It is the most significant electrode for usage in aqueous solutions, theoretically. The reversible hydrogen electrode displays a potential that is thought to be zero at all temperatures in a solution of hydrogen ions with unit activity. Hydrogen is declared to have zero standard electrode potential.
To know more about Hydrogen Electrode visit:
https://brainly.com/question/28198248
#SPJ4
46.8 ml of 1.12 m nitric acid is added to 27.9 ml of potassium hydroxide, and the resulting solution is found to be acidic. 19.0 ml of 0.968 m barium hydroxide is required to reach neutrality. what is the molarity of the original potassium hydroxide solution?
The initial potassium hydroxide solution has a molarity of 0.57M.
Step 1: Acidic HNO3 + KOH Solution
To locate nitric acid moles:
(1.12 mol/L x (0.0468 L) = 0.052 mol HNO3
To locate KOH moles:
KOH's molarity is determined by the formula (0.0279 L)(x) = 0.0279x mol KOH.
Although we are unable to precisely calculate the moles of KOH added, we do know that adding basic KOH to acidic HNO3 still produces an acidic solution, indicating that about 0.052 moles of KOH were added. To completely neutralize the 0.052 mol of acid, step 2 will add the last moles of -OH.
Step 2: Ba neutralizes the Solution (OH)
2
[tex]Ba(OH)_{2}[/tex] mole detection:
0.018 mol [tex]Ba(OH)_{2}[/tex] is equal to (0.0190 L)(0.968mol/L).
To calculate the moles of -OH in 0.018 mol of Ba(OH)
2 0.018 mol Ba (OH)
0.036 mol -OH is equal to 2 times (2 mol -OH / 1 mol [tex]Ba(OH)_{2}[/tex]).
It is neutralized in this stage. Remember that by incorporating 1 mol of [tex]Ba(OH)_{2}[/tex], we actually incorporate 2 molar equivalents of -OH. We attain neutralization after 0.036 mol of -OH has been added.
Neutralization: The formula is (moles of HNO3) - (moles of -OH)
= 0 (0.052 mol) - (0.0279x + 0.036)
= 0 0.016 = 0.0279x
x = 0.57 M.
To learn more about molarity, refer:-
https://brainly.com/question/8732513
#SPJ4
in order to undergo an elimination reaction under blank conditions, the substituents that are to be eliminated ( h and br ) must both be in blank positions. drawing the compound in the chair conformation shows that when br is in an blank position, neither of the adjacent blank carbons has a hydrogen in an blank position, so an elimination reaction blank take place.
Dehydrohalogenation and dehalogenation reactions are the two most frequent elimination processes.
It is common practise to convert saturated compounds (organic molecules with single carbon-carbon bonds) into unsaturated compounds using an elimination reaction (compounds which feature double or triple carbon-carbon bonds).
Therefore, two sigma bonds will break during an elimination process, resulting in the production of a double bond (that is, one sigma and one pi bond).The kind of atoms or groups of atoms that are expelled from the molecule is a frequent way to identify elimination reactions. Dehydrohalogenation, for instance, is the removal of a hydrogen atom and a halogen atom; dehalogenation is the reaction's name when both leaving atoms are halogens.
To learn more about frequent please click on below link
https://brainly.com/question/13305546
#SPJ4
Find is the percent yield for the reaction pcl3(g) + cl2(g) pcl5(g) if 119. 3 g of pcl5 are formed when 61. 3 g of cl2 react with excess pcl3.
If 61. 3 g ions cl2 react to excess pcl3 to generate 119. 3 g of pcl5, the percent yield again for combination pcl3(g) Plus cl2(g) pcl5(g) will be 66.3%.
The meaning of percent yield is?
The actual yield is calculated as the theoretical yield multiplied by 100 to get the percent yield. Actual Yield / Percent Yield Theory Yield) = 100% There are various reasons why a chemical reaction's actual yield could be lower than its theoretical yield; these will be covered in more detail in subsequent stories of the course.
Is a high or low yield preferable?
A low-yield bond is preferable for investors seeking a nearly risk-free investment or for those who are hedging their mixed portfolio by holding some of it in low-risk securities. The
Briefing:
Theoretical yield = 61.3 g Cl2 ( 1 mol / 70.9 g) ( 1 mol PCl5 / 1 mol Cl2 ) ( 208.2 g / 1 mol ) = 180.01 g PCl5
Percent yield = 119.3 g / 180.01 g x100 = 66.3%
To know more about percent yield visit:
https://brainly.com/question/26430784
#SPJ4
toilet bowl cleaners often contain hydrochloric acid, which dissolves the calcium carbonate that accumulates within a toiket bowl. what mass of calcium carbonate can 3.8 g of hcl dissolve
Toilet bowl cleaner contain hydrochloric acid, which dissolves calcium carbonate in a toilet bowl. The mass of calcium carbonate dissolved is 5.28g.
To find out the mass, first write the balanced reaction. The balanced reaction between calcium carbonate and hydrochloric acid is
CaCO₃+2HCl→CaCl₂+H₂O+CO₂
The molar mass of HCl is 36g/mol. Hence, the number of moles for HCl is
moles=3.8 g×(1 mol/36 g)
moles=0.1055 mol
Using moles of HCl, find out moles of CaCO₃. Since mol to mol ratio for HCl to CaCO₃ is 2:1. Therefore, moles of CaCO₃ required is
0.1055 mol HCl×(1 mol CaCO₃/2 mol HCl)
=0.05275 mol CaCO₃
Convert the above moles in the mass. The molar mass of CaCO₃ is
Molar mass=[40+12+(3×16)]g/mol
=(40+12+48)g/mol
=100 g/mol
Hence, the mass of CaCO₃ is
mass=0.05275 mol CaCO₃×(100 g CaCO₃/1 mol CaCO₃)
=5.275 g CaCO₃
=5.28g CaCO₃
Therefore, the mass of calcium carbonate(CaCO₃) dissolved by 3.8g of HCl is 5.28g.
To know more about balanced reactions
https://brainly.com/question/29215391
#SPJ4
when 8.0 g of n2h4 (32 g mol-1) and 92 g of n2o4 (92 g mol-1) are mixed together and react according to the equation above, what is the maximum mass of h2o that can be produced?
When 8.0 g of N₂H₄ (32 g mol⁻¹) and 92 g of N₂O₄ (92 g mol⁻¹) are mixed and react according to the equation above, the maximum mass of H₂O that can be produced is 9 g.
The equation of the reaction of N₂H₄ and N₂O₄ is given by,
2N₂H₄ (g) + N₂O₄ (g) ↔3N₂ (g) + 4H₂O (g)
Mass of N₂O₄ is given by = (2×14+4×16)
= 92 g
Mass of N₂H₄ is given by = 2 (2×14+4)
= 64 g
As per the stochiometric equation, 64 g of N₂H₄ reacts with 92 g of N₂O₄ 8 g of N₂H₄ reacts with
= 92/64 × 8 =11.5 g of N₂O₄
But the given amount of N₂O₄ is 92 g. So N₂H₄ acts as a limiting reagent.
64 g of N₂H₄ gives
4 × 18 = 72 g of water
8 g of N₂H₄ gives
72/64 × 8 = 9 g of water
The mass of water is 9g.
To know more about limiting reactants, click below:
https://brainly.com/question/24945784
#SPJ4
write the chemical equations that show why solutions of al(no3)3, zn(no3)2, and nh4no3 have the ph values that you found?
The chemical equations of the following compounds shows their respective pH. Chemical equations are given below.
Chemical Equations
A equation that consists of reactants, products and an arrow showing the direction of reaction is known as a chemical equation. The equation is said to be balanced chemical equation when the number of atoms of all the molecules is equal on both sides of the equation.
For Al(NO₃)₃
Al(NO₃)₃ + H₂O → Al³⁺ + 3NO₃⁻
Al³⁺ + 6H₂O ⇄ Al(H₂O)₆³⁺
Al(H₂O)₆³⁺ + H₂O ⇄ Al(OH)(H₂O)₅²⁺ + H₃O⁺
pH > 7
For Zn(NO₃)₂
Zn(NO₃)₂ → Zn²⁺ + 2NO₃⁻
Zn(H₂O)₆³⁺ + H₂O ⇄ Zn(OH)(H₂O)₅²⁺ + H₃O⁺
pH < 7
For NH₄NO₃
NH₄NO₃ → NH₄⁺ + NO₃⁻
NH₄⁺ + H₂O ⇄ NH₃ + H₃O⁺
pH < 7
Learn more about balanced chemical equation from the link given below.
https://brainly.com/question/11852878
#SPJ4
write the balanced molecular chemical equation for the reaction in aqueous solution for sodium hydroxide and tin(iv) acetate. if no reaction occurs, simply write only nr. be sure to include the proper phases for all species within the reaction.
The reaction of Sodium hydroxide and Tin(iv) acetate is as follows:
Sodium Hydroxide + Tin(IV) Acetate = Sodium Acetate + Tin(IV) Hydroxide
NaOH + Sn(C2H3O2)4 = C2H3NaO2 + Sn(OH)4
Balanced Chemical Equation:
4NaOH + Sn(C2H3O2)4 → 4C2H3NaO2 + Sn(OH)4
What is an Aqueous solution?
An aqueous solution is one in which water serves as the solvent. It is also known as a water-based solution. Many common chemical substances are dissolved in water, and these are called aqueous solutions. Examples of aqueous solutions include saltwater, vinegar, and sugar water.
What is Sodium hydroxide?
Sodium hydroxide, also known as lye or caustic soda, is a white, solid crystalline substance used in a number of industrial and household applications. It is a strong base that is highly soluble in water and can be used to adjust the pH of a solution. It is also used in the manufacture of soaps, detergents, and cleaning products.
What is Tin(IV)?
Tin(IV) is the chemical name for tin, which is a chemical element with the atomic number of 50. It is a silvery-white, malleable metal that is used in a variety of applications, including alloys, solders, and some electronics.
To know more about Sodium hydroxide,
LINK- https://brainly.com/question/29509565
CODE- #SPJ4
2.____LiBr + Co(SO4)2 → Type:_
4LiBr + Co(SO₄)₂ ----> 2Li₂SO₄ + CoBr₄ is the balanced equation.
First write the complete equation
LiBr + Co(SO₄)₂ ----> Li₂SO₄ + CoBr₄
Now balance the given equation
LiBr + Co(SO₄)₂ ----> Li₂SO₄ + CoBr₄
Reactant Side Product side
Li= 1 Li = 2
Br = 1 S = 1
Co = 1 Co = 1
S = 2 S = 1
O = 8 O = 4
We can see that there are 8 oxygen atom in yhe Reactant side and 4 in the product side. So multiply by 2 in the product side to balance the Oxygen atoms.
4LiBr + Co(SO₄)₂ ----> 2Li₂SO₄ + CoBr₄
We can see that the given equation is now balanced.
Learn more about the Balanced equation here: https://brainly.com/question/26227625
QUESTION: Write the complete equation and also balanced the equation.
_LiBr + _ Co(SO₄)₂ --> _ + _
HCl is a strong electrolyte. A bottle of HCl contains the label 0.015 M HCl(aq). Which statement concerning this HCl solution is FALSE? A. The solution is acidic. B. The pH of the solution is 1.5. C. The hydronium ion concentration in this solution is 0.015 M. D. The solution has a higher concentration of hydronium ions than hydroxide ions. E. The solution contains dissolved H3O* and Cl ions only: no HCl molecules are present.
The calculated pH of the given solution 0.015M HCl (aq) is equal to 1.82. Therefore, option (A) is a FALSE statement concerning this HCl solution.
What is pH?The pH of a given solution can be defined as the negative logarithm of hydrogen (H⁺) or hydronium ion concentration. Mathematically, pH is inversely proportional to the concentration of (H⁺) ions.
pH = -log ([H⁺])
In chemistry, pH scale is used to calculate the acidic or basic strength of an aqueous solution. The pH scale exhibits a range from 0 to 14. A low pH (about 1 or 2) is acidic while a pH of 7.0 is neutral and a high pH (12 or 14) is basic.
Given the concentration of HCl aqueous solution= 0.015M
The hydronium ion concentration, [H₃O⁺] = 0.015 M
pH = -log [H₃O⁺] = - log (0.015)
pH = 1.82
As the HCl is strong acid it will completely dissociate and no HCl molecules are left in the solution.
Learn more about pH value, here:
brainly.com/question/1503669
#SPJ1
30. a compound contains hydroxyl groups as its predominant functional group. which of the following statements is true concerning the compound? a. it lacks an asymmetric carbon and is probably a fat or lipid. b. it is hydrophobic c. it is probably an alcohol. d. it won't form hydrogen bonds with water.
A chemical has hydroxyl groups as its main functional group, hence choice c is accurate. Probably an alcoholic beverage. The substance's primary functional group is a hydroxyl group.
Is referred to as either Alcohols or Carboxylic Acids. Because the hydroxyl group has a hydrophilic character, which means it draws water to itself, it dissolves readily in water. The specific group of atoms in molecules that are in charge of the molecules' distinctive chemical reactions is referred to as a functional group. The hydroxyl group is the functional group that has been provided to us, and its functional formula is -OH. Alcohol is the name given to a substance that contains hydroxyl groups. Hence the compound is alcohol.
Learn more about hydroxyl group here
https://brainly.com/question/23639315
#SPJ4
which molecule has a nitrogen atom with sp2 hybridization? group of answer choices nitromethane, ch3no2
Nitromethane, ch3no2 has a nitrogen atom with sp2 hybridization.
With the chemical formula CH3NO2, nitromethane, or just "nitro," is an organic molecule. The simplest organic nitro compound is this one. It is a polar liquid that is frequently used in extractions, as a reaction medium, and as a cleaning solvent in a range of industrial applications. It is frequently employed in the production of insecticides, explosives, textiles, and coatings as an intermediate in organic synthesis. In a variety of motorsports and pastimes, including Top Fuel drag racing and the miniature internal combustion engines used in radio-controlled, control-line, and free-flight model aircraft, nitromethane is utilized as a fuel additive. This is called Nitromethane.
To learn more about Nitromethane visit here;
https://brainly.com/question/19578949
#SPJ4
true or false: in order for matter to go from the solid state to the liquid state, heat energy must be added to the substance.
The answer to this question will be = True
The process behind the conversion of a solid state to a liquid state is called melting and the process behind it is called Enthalpy of Fusion or Heat of Fusion, when heat energy is added to any solid the particles inside it start to expand due to the heat of fusion and the particles lose their solid property and due to the expansion of molecules of solid, it changes into a liquid.
--Fatty acid molecules with single bonds between some carbons and double bonds between some carbons are ______________.
--A molecule made up of glycerol connected to three fatty acid chains is a ________________.
--A chemical reaction in which an ester is converted into a new type of ester is a ____________.
--Fatty acid molecules with single bonds between all carbons are ________________.
--A type of fuel synthesized by breaking down lipids from natural sources is _______________.
Fatty acid molecules with single bonds between some carbons and double bonds between some carbons are Saturated and unsaturated fatty acids.
What is fatty acids?A fatty acid is an aliphatic carboxylic acid having a saturated or unsaturated chain that is used in chemistry, notably in biochemistry.
The majority of fatty acids that are found in nature contain an unbranched chain with an even number of carbon atoms, ranging from 4 to 28.
Saturated, monounsaturated, polyunsaturated, and trans fats are the four main categories of fatty acids. An elevated risk of coronary heart disease is linked to trans fats and saturated fatty acids.
A molecule made up of glycerol connected to three fatty acid chains is a TriglyceridesA chemical reaction in which an ester is converted into a new type of ester is a Transesterification.Fatty acid molecules with single bonds between all carbons are saturated.A type of fuel synthesized by breaking down lipids from natural sources is BiodieselTo learn more about fatty acid refer :
https://brainly.com/question/17352723
#SPJ4
what would be the correct lewis dot symbol for the chloride ion, cl- ? (select the letter corresponding to the correct symbol) question 6 options: a) (a) b) (b) c) (c) d) (d)
The correct lewis dot symbol for the chloride ion Cl⁻ is given as follows :
..
: Cl :⁻
°°
The chlorine atomic number is 17. The chlorine is place in the group 17 and the period 3 in the periodic table. the electronic configuration oif chlorine is given as :
₁₇Cl = [ Ne ] 3s² 3p⁵
The electrons present in the outer most shell in the chlorine is 7. in the chlorine ion Cl⁻ means one extra electron is added to the chlorine and this shows by the negative charge and the symbol for chlorine ion is Cl⁻ . the lewis dot structure is given above.
To learn more about lewis dot here
https://brainly.com/question/25453559
#SPJ4
A recipe calls for 172 cups of flour to make 5 cakes. How many cups of flour would it take to make 1 cake, written as an improper fraction (fraction greater than one)?.
17/10 cups of flour would it take to make 1 cake.
It is given that,
A recipe calls for 17/2 cups of flour to make 5 cakes.
We need to find the no of cups of flor require to make 1 cake.
5 cakes = 17/2 cups of floor
1 cup =
[tex]=\frac{17}{2}.\frac{1}{5} \\=\frac{17}{10}[/tex]
Therefore, 17/10 cups of floor are needed to make 1 cake.
To learn more about cups of flour from the given link.
https://brainly.com/question/1955459
#SPJ4
the forces described in the previous 2 questions are called dipole-dipole interactions. how might dipole-dipole interactions help many molecules attract each other?
Dipoles are held together by the attraction between the opposingly charged ends of the different molecules for each other.
The positive end of one polar molecule and the negative end of another polar molecule are attracted to one another by dipole-dipole forces. Strengths of dipole-dipole forces per mole range from 5 kJ to 20 kJ.
When two dipolar molecules interact with each other over space, dipole-dipole interactions are the consequence. When this happens, one of the polar molecules' partially negative portion is drawn to the partially positive component of the second polar molecule.
Between molecules with permanent dipoles, there are dipole-dipole forces (i.e., polar molecules). These forces become stronger with increasing polarity for molecules with identical size and mass. Additionally, nonpolar molecules can develop dipoles as a result of polar molecules, producing dipole-induced dipole forces.
For more questions like Dipoles click the link below:
https://brainly.com/question/15571189
#SPJ4
) when 0.75 moles nh4cl is dissolved in water in a calorimeter, whose heat capacity is 0.480 kj/°c, the temperature decreases by 2.34 °c. calculate heat (q) in kj of the system.
Heat of system is 0.0056J/mol
Define heat and kind?
The three types of heat transfer are presented. Conduction of heat through solids, convection of liquids and gases, and electromagnetic waves (radiation). These three types of heat transfer are typically combined, and it often happens on its own.
Briefing:
The calorimeter's heat output is equal to its heat capacity times the temperature change:
Heat released = 0.480× 275.49
= 132.23J
Divide the heat absorbed from the moles.
Molar heat of solution = 0.75/132.23
= 0.0056J/mol
To know more about heat visit:
https://brainly.com/question/1429452
#SPJ4
Closest one to science, Look at attachment answer all 3 , thank you
1. The equation is not balanced because hydrogen atoms are not balanced on both sides of the equation.
The balanced equation is: 4 NH₃ + 5 0₂ ---> 4 NO + 6 H₂0
2. The equation is balanced because the atoms of elements are balanced on both sides of the equation.
N₂ + 3 H₂ --->2NH,
3. The equation is not balanced because hydrogen atoms are not balanced on both sides of the equation.
The balanced equation is: 2 H₂O ---> 2 H₂ + 0₂
What are balanced chemical equations?Balanced chemical equations are equations in which the moles of atoms of elements on the reactants side of the reaction are equal to the moles of atoms of elements on the products side of the reaction.
Learn more about balanced chemical equations at: https://brainly.com/question/26694427
#SPJ1
calculate the volume in ml of 0.50 m sodium hydroxide that is needed to neutralize 1.8000 g of potassium hydrogen phthalate (khp). (molar mass of potassium hydrogen phthalate (khp)
Neutralization is a chemical reaction in which acid and a base react quantitatively with each other. The product obtained here is salt and water. It is even called as a double replacement reaction.
How can we calculate volume after neutralization process?
KHC8H4O4 is potassium hydrogen phthalate (KHP).
The balanced equation for the reaction:
KHC8H4O4 + NaOH ==> KNaC8H4O4 + HOH
So, the stoichiometry is 1 moles NaOH needed for 1 mole of KHP.
Molar mass of KHP = 204 g/mol
Thus, volume after neutralization process is
= 1.800 g KHP x 1 mole KHP/204 g
= 0.00882 moles
It will take 0.00882 moles of NaOH to neutralize this.
To know more about neutralization, click on https://brainly.com/question/23008798
#SPJ4
describe and explain the heating test of aspirin. what observation was made when aspirin was heated? why?
Heating the aspirin speeds up the reaction time. A vinegar-like smell is produced which is acetic acid.
Describe how aspirin is synthesized?
Salicylic acid and acetic acid can be combined to create aspirin in the presence of a catalyst that is also an acid. Together with the carboxyl group on acetic acid, the phenol group on salicylic acid produces an ester. Nevertheless, the yield of this reaction is little, and it is sluggish. The reaction is more faster and has a greater yield when acetic anhydride is used in place of acetic acid (since acetic anhydride is much more reactive than acetic acid).
To know more about aspirin, check out https://brainly.com/question/25794846
#SPJ4
33.0g of silver chloride into moles of silver chloride.