Answer:
Percent composition by element
Element Symbol Atomic Mass
Antimony Sb 121.760
Explanation:
this is from my chemistry assignment :
1) You have a tank of N2 gas. If the tank contains 11.65 L of the gas (at STP), how many molecules of N2 are in it?
can someone pls explain how I would answer this and what equation I would use ?
Answer:
Because of the gravity of the earth
If the rate-determining step limits the speed of a reaction, which statement is correct?
A.
Even if one or more fast steps occur in a reaction, the overall reaction cannot proceed any faster than the slowest step.
B.
If the first step is slow and the second step is fast, then the second step should determine the rate of the overall reaction.
C.
Increasing the concentration of a molecule that occurs in a fast step after a slow step will increase the overall rate of the reaction.
D.
In a unimolecular reaction where A decomposes to B and C, the rate of the reaction will decrease if the concentration of A is increased.
Answer:
A:Even if one or more fast steps occur in a reaction, the overall reaction cannot proceed any faster than the slowest step.
Answer:
A
Explanation:
Edge 2020
hope this helps :)))))
3. How many moles of NaCl are present in 6000. La 1.5 M NaCl solution?
A.9.0
B.9.0 x 10^3 moles
C.4.0 x 10^8 moles
Answer:
Option A (9.0) is the correct alternative.
Explanation:
The given values are:
Molarity,
= 1.5 M
Volume,
= 6000 mL
or,
= 6 L
As we know,
⇒ [tex]Molarity=\frac{Moles}{Volume}[/tex]
or,
⇒ [tex]The \ moles \ of \ NaCl=Molarity\times Volume[/tex]
By putting the values, we get
[tex]=1.5\times 6[/tex]
[tex]=9 \ mol[/tex]
Identify whether each compound is a straight chain, branched chain, or cycloalkane,
Answer:
First Part: branched chain, cycloalkane, straight chain
Second Part: straight chain, branched chain, cycloalkane.
Explanation:
Edg 2021
Answer:
A: branched chain, B: cycloalkane, and C: straight chain.A: straight chain, B: branched chain, and C: cycloalkane.Explanation:
How do we balance a chemical equation?
O adding elements as necessary
changing subscripts
erasing elements as necessary
placing coefficients
Answer: placing coefficients
Explanation: In a balanced chemical equation, the total number of atoms of each element present is the same on both sides of the equation. Stoichiometric coefficients are the coefficients required to balance a chemical equation. These are important because they relate the amounts of reactants used and products formed.
is a straight chain, a linear chain and an unbranched chain the same thing?
Answer:
All carbon atoms can be connected to a continuous chain in the straight-chain alkane. In alkanes of a branched-chain, all carbon atoms cannot be connected to a continuous chain as a branch or side chain is part of the carbon chain.
Explanation:
HELP ME WITH THIS PLSSSSS
Answer:Predatorrrrrrrrrrrrrrrr
Pls gimme Brainliest
If you have a gas stored at a constant temperautre, describe how increasing the pressure will affect the volume.
Answer:
It means that for a gas at a constant temperature, pressure × volume is also constant. So increasing pressure from pressure1 to pressure2 means that volume1 will change to volume2, providing the temperature remains constant.
PLLLLLLLZ HELP IS NEEDED ASAP I WOULD REALLY APPRECIATE IT
Answer:
1)Reactants
2)Light
3)An item that can increase reaction rates
4)Reactants must collide with each other
Less molecules lower the chance for collisions
The more collisions there are the higher the reaction rate
What is the [H] in a solution with a pH of 9.92
Answer:
the solution is acidic as its ph has already exceeded the neutral level
[tex]1.1 X 10^-9 M[/tex] is the [H] in a solution with a pH of 9.92.
What is pH?pH is the quantitative measure of the acidity or basicity of aqueous or other liquid solutions.
The pH of a solution is usually found by the following expression:
pH=-log [[tex]H^+[/tex]]
Therefore, to find the concentration of [tex]H^+[/tex] we can rearrange this expression and thus,
= [[tex]H^+[/tex]] = [tex]10^-^{pH}[/tex]
= [[tex]H^+[/tex]] = [tex]10^-^{9.92}[/tex]
=[tex]1.1 X 10^-9 M[/tex]
Learn more about pH here:
https://brainly.com/question/27359971
#SPJ2
I'm timed! Select the STEM-related activities performed in the fashion industry.
garment weaving
market analysis
pattern making
fabric dyeing
product promotion
product advertising
Answer:
All of them I think
Explanation:
STEM is science, technology, engineering and math, and all of them use that in some aspect
HURRY!!!
What can you infer about the growth of the seed represented in the graphs below?
Answer:
B
Explanation:
Vibration speed is measured in hertz. The graph below shows the vibration speeds and pitches of six sounds. Pitch & Vibration Speed of Sounds. Which of the following can be concluded from the graph?
Explanation:
which graph, please theres no graph
Which influences line form
Answer:
Line form is influenced by how fast we are writing and the pressure and also what writing instrument is used
PLEASE HELP WILL GIVE BRAINLIEST!!!!
Answer:
its D
Explanation:
the principal quantum number, n, describes the energy of an electron and the most probable distance of the electron from the nucleus. In other words, it refers to the size of the orbital and the energy level an electron is placed in. The number of subshells, or l, describes the shape of the orbital.
help me get this right no links
Answer:
The gravitational pull of the moon and the rotational force of the Earth cause tides to rise and fall across the planet. The species living in coastal areas most affected by changing tides have unique ways of surviving.
So, the answer is B.
ANSWER FAST PLEASE!
Balance the following equation:
__Hg + __O₂ --> __HgO
Answer:
4Hg+2O2=4HgO
four Mercury + four oxygen
8. Which of the following have bacteria in their root nodules that fix nitrogen?
1. Legumes
b. Meat
c. "Trees
d. Algae
Answer:
Option A
Explanation:
Leguminous plants like pulses etc. have root nodules comprising of rhizobacterium which live in a symbiotic relationship with the roots of the plant and in turn fix the nitrogen in the soil in the roots of the leguminous plants.
Hence, option A is correct
How much energy (in KJ) is needed to melt 15g of ice at -4oC and raise it to a temperature of 115oC? Round the closest number, and include units
Answer:
The energy needed is 45.7659 kJ
Explanation:
The given mass of the ice, m = 15 g
The initial temperature of the ice, T₁ = -4°C
The temperature
The final temperature, T₂ = 115°C
The specific heat capacity of ice, c₁ = 2.09 J/(g·°C)
The latent heat of ice, l₁ = 334 J/g
The heat capacity of water, c₂ = 4.184 J/(g·°C)
The latent heat of vaporization, l₂ = 2260 J/g
The specific heat of steam, c₃ = 2.02 J/g
Therefore, we get the energy needed, ΔQ, as follows;
ΔQ = m·c₁·(T₂ - Tₐ) + m·l₁ + m·c₂(Tₓ - Tₐ) + m·l₂ + m·c₃·(T₂ - Tₓ)
Where;
Tₐ = The melting point temperature of water = 0°C
Tₓ = The boiling point temperature of water = 100°C
∴ ΔQ = 15×2.09×(0 - (-4)) + 15 × 334 + 15×4.184×(100 - 0) + 15×2260 + 15×2.02×(115 - 100) = 45,765.9
The energy needed, ΔQ = 45,765.9 J = 45.7659 kJ.
Describe four effects that radiation can have on the human body.
Answer:
There are many effects of radiation to the human body. (if you watch the 100, you'll see what happens)
Exposure to very high levels of radiation, such as being close to an atomic blast, can cause acute health effects such as
1. weakness
a/ fatigue,
b/ fainting,
c/ confusion.
2.Bleeding from the nose,
a/ mouth,
b/ gums,
c/ rectum
3. Bruising,
a/ skin burns,
b/ open sores on the skin,
c/ sloughing of skin.
4. Dehydration.
5. Diarrhea, bloody stool.
6. Fever.
7. Hair loss.
8. Inflammation of ex
I need the answer by 12❤️
Answer:
answer number 3? ac
Explanation:
If I have 17 liters of gas at a temperature of 67°C and a pressure of 88.89 atm, what will be pressure of the gas if I raise the temperature to 367K and decrease the volume to 12 Liters?
Answer:
xiu I nnn ivy u
Explanation:
shin deer high ed residency by uh uh to
um can someone just help me with the first question so I have an idea of what to do...please
look at the clues by it and try not to trust the links they trying to give u...
but i kinda dont know myself any periodic table i can look at?
Potassium hydrogen phthalate, KHP, is used as a primary standard for determining the concentration of a solution of NaOH by titration. If the KHP has not been dried before weighing, the calculated molarity of the NaOH would be
A) higher than the actual value, since water is included in the apparent mass of KHP
B) higher than the actual value, since the presence of water requires a larger volume of titrant
C) lower than the actual value, since NaOH absorbs water
D) unaffected, since KHP is a strong acid
E) unaffected, since water is routinely added before the titration
Answer:A
Explanation:
If the KHP has not been dried before weighing, the calculated molarity of the NaOH would be higher than the actual value, since water is included in the apparent mass of KHP.
The KHP is Potassium hydrogen phthalate. It is commonly used as a primary standard in pure form for sodium hydroxide titrations because it is stable in air making it easy to weigh.
However, if KHP is not dried very well, the mass of water is included as part of the mass of KHP and this will make calculated molarity of KHP to be higher than the actual value.
Again, the reaction between KHP and NaOH has a 1:1 molar ratio so if the molarity of KHP is higher than its actual value, the molarity of the NaOH would also be higher than the actual value.
Learn more: https://brainly.com/question/17134477
Using the terms "breaking and making bonds", explain the net energy change for the chemical reaction
between water and ammonium nitrate.
Will give brainliest!
How does the melting of ice caps near the North Pole affect the salinity of the ocean?
Salinity decreases because freshwater flows into the ocean
Salinity increases because of the stored pockets of air and salt
Salinity increases because salt from the ice caps flows into the ocean
There is no change in the ocean’s salinity with this process
Answer:
A.
Explanation:
melting of ice will increase water in oceans due to which water in oceans will increase and salinity will decrease. hence, melting of ice caps near the north pole affects salinity of the ocean
You're provided a 0.50 M solution of HCl. How many moles of HCl are present in 25 ml of this solution?
Answer:
0.0125 moles of HCl
Explanation:
(0.50 mol/L)(0.025 L) = 0.0125 moles of HCl
how does H3O+ and OH- relate to acids, bases, and the pH scale?
Answer:
For pure water, the values of [H3O+] and [OH-] are equal and thus their values are both 1.0 x 10-7. If there is an equal amount of acid and base present in any solution, the solution is called "neutral" and the pH of the solution is 7. ... The sum of the pH and pOH must always equal 14.
Explanation:
2. All metals are good conductors because their electrons can
move easily through the metal.
What do you think will be true about electrons in an insulator?
Help me please
This is for my science homework
Answer: An insulator would be made out of material unable to conduct electricity due to lack of fluid movement for electrons, such as rubber. Rubber properties not only prevents them from freely moving, but also helps electrons stay tightly bound to each other.
Hope this helps ^_^
14.
Unlike addition polymers, condensation polymers form from _____.
monomers that have only one functional group
the head-to-tail joining of monomer units
the joining of unsaturated monomers
monomers that have at most three carbon atoms
Answer:
Addition polymers are formed when monomer units join each other in a process that involves the rearranging of electrons in double or triple bonds in the monomer. The polymer is the ONLY product formed.
EX:C=C + C=C + C=C - ·C-C-C-C-C-C·
Ethene(ethylene) monomers -> part of polyethene
Explanation: