the 120-lb woman jogs up the flight of stairsThe 120-lb woman jogs up the flight of stairs in 5 seconds. Determine her average power output.

Answer:

None of the above forces on air drag on him is equal to his weight

Explanation:

In the velocity-time graph,the gradient of the curve where it is flatten shows the parachutist reaches the terminal velocity when it reaches terminal velocity which means the parachutist reaches constant velocity or speed,indicating that the acceleration of free fall(g) is zero.And according to the resultant force formula weight - air drag= mass*acceleration. so when accelerate is zero,resultant force is zero. And hence the equation will be like this: weight= air drag

Answer:

the value of the final pressure is 0.168 atm

Explanation:

Given the data in the question;

Let p₁ be initial pressure, v₁ be initial volume.

After expansion, p₂ is final pressure and v₂ is final volume.

So using the following equations;

p₁v₁ = nRT

p₂v₂ = nRT

hence, p₁v₁ = p₂v₂

we find p₂

p₂ = p₁v₁ / v₂

given that; initial volume v₁ = 0.175 m³, Initial pressure p₁ = 0.350 atm,

final volume v₂ = 0.365 m³

we substitute

p₂ = ( 0.350 atm × 0.175 m³ ) / 0.365 m³

p₂ = 0.06125 atm-m³ / 0.365 m³

p₂ = 0.168 atm

Therefore, the value of the final pressure is 0.168 atm

Answer: The egg will get sucked into the bottle. To get the egg out of the bottle, turn the bottle upside down and blow into it, so that the egg acts as a one-way valve. The increased air pressure in the bottle will cause the egg to pop back out.

Explanation:

Quickly place the egg over the mouth of the bottle. The egg will get sucked into the bottle. To get the egg out of the bottle, turn the bottle upside down and blow into it, so that the egg acts as a one-way valve. The increased air pressure in the bottle will cause the egg to pop back out.

Answer:

T = 6.43 x 10⁻⁵ N.m

Explanation:

First, we will calculate the deceleration of the apparatus by using the third equation of motion:

[tex]2\alpha \theta = \omega_f^2-\omega_i^2[/tex]

where,

α = angular decelration = ?

θ = angular displacement = (236 rev)(2π rad/rev) = 1482.83 rad

ωi = initial angular speed = (24 rpm)(2π rad/1 rev)(1 min/ 60 s) = 2.51 rad/s

ωf = final angular speed = 0 rad/s

Therefore,

[tex]2\alpha(1482.83\ rad) = (0\ rad/s)^2-(2.51\ rad/s)^2\\\\\alpha = -\frac{(2.51\ rad/s)^2}{2965.66\ rad} \\\\\alpha = - 8.46\ x\ 10^{-4}\ rad/s^2[/tex]

negative sign shows deceleration

Now, for torque:

T = Iα

where,

T = Torque = ?

I = moment of inertia = 0.076 kg.m²

Therefore,

T = (0.076 kg.m²)(8.46 x 10⁻⁴ N.m)

T = 6.43 x 10⁻⁵ N.m

Explanation:

F=w/s

F=40,000j/330m

F=121.212N

Answer:

acceleration is measured

Answer:

Explanation:

From the given information:

Let's assume that the missing function is:

s(t) = t³ - 6t², t ≥ 0

From part (b), we are to find the given  required terms when time t = 2

So; from the function s(t) =  t³ - 6t², t ≥ 0

[tex]velocity \ v(t) \ = \dfrac{d}{dt}s(t)[/tex]

[tex]velocity \ v(t) \ = \dfrac{d}{dt}(t^3 - 6t^2)[/tex]

[tex]velocity \ v(t) \ = 3t^2 - 12t[/tex]

[tex]acceleration a(t) = \dfrac{d}{dt}*v(t)[/tex]

[tex]acceleration a(t) = \dfrac{d}{dt}(3t^2 - 12 t)[/tex]

[tex]acceleration\ a(t) = 6t - 12[/tex]

At time t = 2

The position; S(2) = (2)² - 6(2)²

S(2) = 8 - 6(4)

S(2) = 8 - 24

S(2) = - 16 ft

v(2) = 3(2)² - 12 (2)

v(2) = 3(4) - 24

v(2) = 12 - 24

v(2) = - 12 ft/s

speed = |v(2)|

|v(2)|  = |(-12)|

|v(2)| = 12 ft/s

acceleration = 6t - 12

acceleration = 6(2) - 12

acceleration =  12 - 12

acceleration =  0 ft/s²

Answer:

the pearls have an electrical charge induced by contact with the ions of the solution and these charges are attracted by the electrode by a force electric

Explanation:

The pearls are suspended in a solution, when connecting the power source, it is subjected to an electric shock, the pearls have an electrical charge induced by contact with the ions of the solution and these charges are attracted by the electrode by a force electric

            F = q E

Answer:

D

Explanation:

Because the y axis is meter. If it is straight line at time and meter graph then it velocity and speed is 0

Answer:

B is excellent answer..............

The model of the brain that is shown here is the experimental model that is present in Option B, as it is used to study the brain's parts and its function, which is helpful for a better understanding of the brain.

There are various experimental models of the brain that have been developed to better understand its functions and mechanisms, such as Animal models, such as mice, rats, and primates, have been widely used to study the brain due to their similarity to the human brain in terms of structure and function. Computer models can simulate brain function and behavior at various levels of detail, from individual neurons to large-scale brain networks. These models are useful for testing hypotheses and predicting outcomes, as well as for designing new experiments.

Hence, the model of the brain that is shown here is the experimental model that is present in Option B.

Learn more about the experimental model of the brain here.

https://brainly.com/question/23802617

#SPJ7

u = 0.077

Explanation:

Work done by friction is

Wf = ∆KE + ∆PE

-umgx = ∆KE,. ∆PE =0 (level ice surface)

-umgx = KEf - KEi = -(1/2)mv^2

Solving for u,

u = v^2/2gx

= (12 m/s)^2/2(9.8 m/s^2)(95 m)

= 0.077

Kinetic friction is the ratio of the friction force to the normal force experienced by a body in moving state.The coefficient of kinetic friction between the ice and skates is 0.077.

Given-

velocity of the ice skater is 12 m/ sec.

Work done by the friction is the sum of the change of the kinetic energy and the change in potential energy.

[tex]W_{f}=\bigtriangleup KE +\bigtriangleup PE[/tex]

The value for the potential energy will be equal to Zero in this case. Therefore the work done by the friction is,

[tex]W_{f}=\bigtriangleup KE +0[/tex]

Kinetic energy is directly proportional to the mass of the object and to the square of its velocity and work done can be given as,

[tex]W_{f} =u_{f} mgx[/tex]

Here,  [tex]u_{f}[/tex] is friction force, [tex]m[/tex] is mass, [tex]g[/tex] is gravity and x is the distance .

Equate the value of kinetic energy and work done of friction for further result, we get,

[tex]u_{f} mgx=\dfrac{1}{2} \times mv^2[/tex]

[tex]u_{f} =\dfrac{1}{2gx} \times v^2[/tex]

[tex]u_{f} =\dfrac{1}{9.8\times 95} \times 12^2[/tex]

[tex]u_{f} =0.077[/tex]

Hence, the coefficient of kinetic friction between the ice and skates is 0.077.

For more about the friction, follow the link below-

https://brainly.com/question/13357196

If two objects are the SAME temperature and are physically touching,

then

. . .

. . .

. . .

The objects would be in thermodynamic equilibrium and as a result there would be no heat transfer.

Answer:

Resistance is as large as 2.8 ohm

Explanation:

Complete question

A 3.0 A current is maintained in a simple circuit that consists of a resistor between the terminals of an ideal battery. If the battery supplies energy at a rate of 25 W, how large is the resistance?

Solution -

The relation between Power and current is as follows  

P = I^2*R

R = P/I^2

Were P = Power

R = resistance and

I = current

Given-  

P = 25 W  

I = 3.0 A

Substituting the given values, in above equation, we get -  

R = 25/3.0^2

R = 2.8 ohm

Answer:

v= IR then you can R= v/I 9v÷0.002 = 450 Ohms

Answer:

a)   a = 34.375 m / s²,  b)    v_f = 550 m / s

Explanation:

This problem is the launch of projectiles, they tell us to ignore the effect of the friction force.

a) Let's start with the final part of the movement, which is carried out from t= 16 s with constant speed

             v_f = [tex]\frac{x-x_1}{t}[/tex]

we substitute the values

             v_f = [tex]\frac{ 6600 -x_1}{4}[/tex]  

The initial part of the movement is carried out with acceleration

             v_f = v₀ + a t

             x₁ = x₀ + v₀ t + ½ a t²

the rocket starts from rest v₀ = 0 with an initial height x₀ = 0

             x₁ = ½ a t²

             v_f = a t

we substitute the values

              x₁ = 1/2  a 16²

              x₁ = 128 a

              v_f = 16 a

let's write our system of equations  

               v_f = [tex]\frac{6600 - x_1}{4}[/tex]

               x₁ = 128 a

               v_f = 16 a

we substitute in the first equation  

               16 a = [tex]\frac{6600 -128 a}{4}[/tex]

               16 4 a = 6600 - 128 a

                a (64 + 128) = 6600

                a = 6600/192

                 a = 34.375 m / s²

b) let's find the time to reach this height

                x = ½ to t²

                t² = 2y / a

                t² = 2 5100 / 34.375

                t² = 296.72

                t = 17.2 s

We can see that for this time the acceleration is zero, so the rocket is in the constant velocity part

               v_f = 16 a

               v_f = 16 34.375

               v_f = 550 m / s

Answer:

2

Explanation:

Answer:

(a) Negative Q

(b) Positive Q

Explanation:

Charge is the inherent property of matter due to the transference of electrons.

There are three methods of charging a body.

(i) Charging by friction: When two uncharged bodies rubbed together, then one body gets positive charged and the other is negatively charges it is due to the transference of electrons form one body to another.  

(ii) Conduction: when a charged body comes in contact with the another uncharged body, the uncharged body gets the same charge and the charge is distributed equally.

(iii) Induction: When a uncharged body keep near the charged body, the uncharged body gets the same amount of charge but opposite in sign.  

(a) When a small tack of charge Q is lowered into the hole, then due to the process of induction, the charge on the inner surface of the shell is - Q.

(b) Due to the process of conduction, the charge on the outer surface of the shell is Q.

The charge on the inner surface of the shell is negative whereas the charge on the outer surface of the shell is positive.

Due to the process of induction the inner surface of the shell creates negative charge because when a uncharged body bring near to the charged body, the uncharged body gets the same amount of charge but opposite in sign.

While on the other hand, there is no charge interaction with the outer surface so it remains positively charge so we can conclude that the charge on the inner surface of the shell is negative whereas the charge on the outer surface of the shell is positive.

Learn more about charge here: https://brainly.com/question/18102056

Answer:

false

Explanation:

Answer:

The new force becomes (1/9)th of the original force.

Explanation:

The gravitational force between two masses is given by :

[tex]F=G\dfrac{m_1m_2}{r^2}[/tex]

Where

r is the distance between masses,

If the new distance is, r' = 3r

The new force is given by :

[tex]F'=G\dfrac{m_1m_2}{r'^2}\\\\F'=G\dfrac{m_1m_2}{(3r)^2}\\\\F'=\dfrac{1}{9}\times G\dfrac{m_1m_2}{r^2}\\\\F'=\dfrac{F}{9}[/tex]

So, the new force becomes (1/9)th of the original force.

Answer:

yes

Explanation:

this means the answer is yes

Solution :

The conditions for the maximum in the Young's experiment is :

d sin θ = m λ,     where m = 0, 1, 2, 3, .....

The angle between the central maximum and the 1st order maximum can be determined by setting the m = 1. So,

d sin θ =  λ

[tex]$\theta = \sin^{-1}\left(\frac{\lambda}{d}\right)$[/tex]

Given : d = 100 λ

[tex]$\theta = \sin^{-1}\left(\frac{\lambda}{100 \lambda}\right)$[/tex]

[tex]$\theta = \sin^{-1}\left(\frac{1}{100}\right)$[/tex]

 [tex]$=0.573^\circ$[/tex]

  = 0.01 rad

Answer:

The spring constant is 173.12 N/m.

Explanation:

mass, m = 32 kg

Period, T = 2.7 s

let the spring constant is K.

Use the formula of period,

[tex]T = 2\pi\times \sqrt \frac{m}{K}\\\\2.7 =2\times 3.14\sqrt\frac{32}{K}\\\\K = 173.12 N/m[/tex]

Hi there!

[tex]\large\boxed{1560 kgm/s}[/tex]

Recall that:

P = m · v, where:

P = momentum

m = mass (kg)

v = velocity (m/s)

Thus:

P = 156 · 10

P = 1560 kgm/s

Answer:hot air

Explanation:Hot air goes up, so when you put it in a hot air balloon fire is placed at the oppening to creat hot air and lift the balloon! :)

Answer:

Option A (69.56 newtons) is the appropriate solution.

Explanation:

According to the question,

On the X-axis,

⇒ [tex]T_1Cos30^{\circ}-T_2Cos60^{\circ}=0[/tex]

or,

    [tex]T_1Cos 30^{\circ}=T_2Cos60^{\circ}[/tex]

On substituting the values, we get

      [tex]T_1\times \frac{\sqrt{3} }{2}=T_2\times \frac{1}{2}[/tex]

      [tex]T_1\times \sqrt{3} =T_2[/tex]....(equation 1)

On the Y-axis,

⇒ [tex]T_1Sin30^{\circ}+T_2Sin60^{\circ}=139.3 \ N[/tex]

                        [tex]\frac{T_1}{2} +\frac{\sqrt{3} }{2} =139.2 \ N[/tex]

                    [tex]T_1+\sqrt{3}T_2=139.2\times 2[/tex]

From equation 1, we get

           [tex]T_1+\sqrt{3}\times \sqrt{3}T_1 =278.4 \ N[/tex]

                        [tex]T_1+3T_1=278.4 \ N[/tex]

                                [tex]4T_1=278.4 \ N[/tex]

                                  [tex]T_1=\frac{278.4}{4}[/tex]

                                       [tex]=69.6 \ N[/tex]  

Answer:

69.58

Explanation:

The question is incomplete. The complete question is :

A circular loop of wire with a radius of 15.0 cm and oriented in the horizontal xy-plane is located in a region of uniform magnetic field. A field of 1.2 T is directed along the positive z-direction, which is upward. (a)If the loop is removed from the field region in a time interval of 2.8 ms, find the average emf that will be induced in the wire loop during the extraction process.

Solution :

Let us consider a [tex]$\text{circular loo}p \text{ of wire}$[/tex] which has a [tex]\text{radius}[/tex] of r = [tex]15[/tex] cm.

It is oriented horizontally along the xy-plane and is located in the region of an [tex]$\text{uniform magnetic field}$[/tex], such that it points in the positive z direction and having a magnitude of B = 1.2 T.

Now if the loop [tex]$\text{is removed from the field region}$[/tex] in a time interval of Δt = 2.8 ms. Initially the magnetic field and the area points is in the same direction, so that the angle between them is Ф = 0°, thus the initial and the final fluxes are :

[tex]$\phi_{B,i}=BA \cos (\phi) = BA $[/tex]    and   [tex]$\phi_{B,f} = 0$[/tex]

Area A = [tex]$\pi r^2.$[/tex] The induced emf equals to the change in the flux, and is divided by the time that it takes to go from the initial flux, Δt and multiplied by the number of turns N = 1, i.e. ,

[tex]$\epsilon = -\frac{\Delta \phi_{B}}{\Delta t}$[/tex]

  [tex]$=-\frac{0-(1.2 T)\pi(0.15^2)}{2.8 \times 10^{-3}}$[/tex]

  = 30.27 V

Therefore, the emf generated is 30.27 V.

Complete question:

while hunting in a cave a bat emits sounds wave of frequency 39 kilo hartz were moving towards a wall with a constant velocity of 8.32 meters per second take the speed of sound as 340 meters per second. calculate the frequency​ reflected off the wall to the bat?

Answer:

The frequency reflected by the stationary wall to the bat is 41 kHz

Explanation:

Given;

frequency emitted by the bat, f = 39 kHz

velocity of the bat, [tex]v_b[/tex] = 8.32 m/s

speed of sound in air, v = 340 m/s

Apply the doppler-effect principle to solve this problem.

The apparent frequency of sound striking the wall is calculated as;

[tex]f' = f(\frac{v}{v- v_b} )\\\\f' = 39,000(\frac{340}{340 -8.32} )\\\\f' = 39978.29 \ Hz[/tex]

The frequency reflected by the stationary wall to the bat is calculated as;

[tex]f_s = f'(\frac{v + v_b}{v} )\\\\f_s = 39978.29(\frac{340 + 8.32}{340} )\\\\f_s = 40,956.56 \ Hz[/tex]

[tex]f_s\approx 41 \ kHz[/tex]

c. a natural process

It is a natural process