Temperature is a measure of ___________

A: Heat Energy
B: Potential Energy
C: Climate
D: Kinetic Energy​

Answer: 3

Explanation:

Answer:

-55°C

Explanation:

Bwcause 38°C is gonna make it colder so thats why you should use that.

Answer:

Sound requires a medium to move through; light does not.

Sound and light are similar in that both are forms of energy that travel in waves.

Explanation:

Sound and light are similar in that both are forms of energy that travel in waves. They both have properties of wavelength, freqency and amplitude. Sound can only travel through a medium (substance) while light can travel through empty space. Sound is a form of mechanical energy caused by vibrations of matter.

Light waves DO NOT require a medium, they travel fastest in empty space; Sound waves REQUIRE a medium, they travel fastest in dense material like solids. Sound is a longitudinal wave.

There are two modes in which unstable nuclei of radioactive elements may decay. They are by α - emission or by β - emission. Among the given options, the α - emission is ₆₄¹⁴⁸Gd → ₆₂¹⁴⁴Sm + ₂⁴He. The correct option is D.

According to the theory of radioactive disintegration, the atoms of all the radioactive elements undergo spontaneous disintegration with the emission of α or β particles to yield atoms of new elements. When a radionuclide decays by emitting an  α - particle, it is called α - decay.

When a radionuclide undergoes  α - emission, i.e. a helium nucleus there occurs a decrease of 2 units in the atomic number and a decrease of 4 units in the mass number. The new nuclide produced has an atomic number 2 units less and a mass number 4 units less than the parent.

₆₄¹⁴⁸Gd → ₆₂¹⁴⁴Sm + ₂⁴He represents α - emission.

Thus the correct option is D.

To know more about α - emission, visit;

https://brainly.com/question/14921881

#SPJ7

Answer:

It is the one that has start and finish and a compass on it...I am sorry I can share images for some reason. And underneath the compass, it says 1.0 Mile. It also has a compass in the bottom right-hand corner.

Explanation:

I just took the quiz and got it correct!

Considering the reaction stoichiometry, the enthalpy change if enough propane was burned to give off 12 moles of carbon dioxide gas is 8228 kJ.

The balanced reaction is:

C₃H₈(g) + 5 O₂(g) → 3 CO₂(g) + 4 H₂O(l)

The heat of combustion of propane, C₃H₈, is -2057 kJ/mol. This is, 2057 kJ is released for every 1 mol C₃H₈.

So to determine the enthalpy change if enough propane was burned to emit 12 moles of carbon dioxide, you must take into account the stoichiometry of the reaction.

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 3 moles of CO₂ are produced by 1 mole of C₃H₈, 12 moles of CO₂ are produced by how many moles of C₃H₈?

[tex]amount of moles of C_{3} H_{8} =\frac{12 moles of CO_{2}x1 mole of C_{3} H_{8} }{3 moles of CO_{2}}[/tex]

amount of moles of C₃H₈= 4 moles

So to determine the enthalpy change, you can apply the following rule of three: If for each mole of C₃H₈ 2057 kJ are released, for 4 moles of C₃H₈ how much heat is released?

[tex]Heat released=\frac{4 molesx2057 kJ}{1 mole}[/tex]

Heat released= 8228 kJ

The enthalpy change if enough propane was burned to give off 12 moles of carbon dioxide gas is 8228 kJ.

Learn more:  

Answer:

C. Chemical Bonds are broken

Explanation:

A chemical reaction occurs when chemical bonds are broken.

Chemical reactions occur when chemical bonds between atoms are formed or broken.

Hope this helps :)

Answer:

c: chemical bonds are broken

Explanation:

the broken bonds then create new bonds, rearranging the atoms into a new substance :)

Answer:

There are 95 atoms in mercury phosphate

Explanation:

You just add the atomic number for both elements

As far as the intelligence of canines, it is widely accepted as a fact that the Border Collie is the most intelligent breed of dog.

The conclusion that border collies are the most intelligent breed of dog is credited to a canine psychologist by the name of Stanley Coren. He studied over 138 recognized breeds of dogs to measure the ease with which they learned new commands and the obedience rate of each breed.

Coren studies the learning and obedience of Border Collies over the course of 199 trials and found that this breed of dog performed 95% better than most other breeds, with only 9 of the 138 breeds studied coming close to the results of the border collie. Easily earning the title of the most intelligent breed of dogs.

To learn more visit:

https://brainly.com/question/9404831?referrer=searchResults

Answer:

Specific heat of ethyl chloride in gas and liquid phases, enthalpy of vaporization and specific heat of solid surface.

Explanation:

In order to determine the final temperature, the heat lost by the chloride needs to be found. This would require the specific heat in both phases and the enthalpy of vaporization. (you will use q=mc(delta)T and q=m(delta)H)

Then the energy gained by the surface needs to be found. This will require the specific heat in order to use the q=mc(delta)T equation.

The enthalpies that we consider to calculate the final temperature of the surface are Specific heat of surface and ethyl chloride as well as Heat of vaporization of liquid & vapor ethyl chloride.

Enthalpy of any reaction tells about the total amount of heat absrobed and released during a chemical reaction.

According to the question, heat released by the surface is absorbed by the ethyl chloride and by absorbing this energy ethyl chlorode will change into the vapor form. In the whole process if we want ot calculate the final temperature on the surface then we should consider:

Hence, required enthalpies are Specific heat of surface and ethyl chloride as well as Heat of vaporization of liquid & vapor ethyl chloride.

To know more about enthalpies, visit the below link:
https://brainly.com/question/11628413

Answer:

There is no atmosphere outside the space station, so there is nothing to vibrate, therefor there is no sound.you better install your earphones in your space suit.

Explanation:

Imagine that you are just outside the International Space Station (ISS) orbiting Earth, working in space. You brought your speaker with you so you could listen to some music while you work. You find the right song, and you hit play. What do you hear? Write your response below in complete sentences.

Include the answers to these questions in your response: •

Would you hear your music? •

Why or why not?

You need matter that can vibrate and finally vibrate your ear drum in order to transmit sound waves. that you hear

There is no atmosphere outside the space station, so there is nothing to vibrate, therefor there is no sound.you better install your earphones in your space suit.

You will hear no music as there is no sound in the space because there are no molecules to vibrate.

Sound is generally considered a form of energy that consists of mechanical waves which travel in a medium. Sound is produced by a vibrating body which generates a disturbance in the medium and the medium helps to propagate the sound.

The medium of sound transmission is air where the molecules in the air are in the form of longitudinal waves. The vibrating body generates a disturbance in the rarefaction and compression of waves. The disturbance of the particles of the surrounding medium produces sound.

Sound always requires a medium to be traveled and reach its destination. As space does not have any medium for sound to generate disturbance. Space has a vacuum due to which sound cannot be heard in space.

Therefore, you will hear no music when you play a song in the space.

Learn more about sound, here:

https://brainly.com/question/14109969

#SPJ2

The volume of the gas is 27 ml

The calculation can be done as follows

The first step is to convert the pressure to atm

convert 2280 tors to atm

760 tors= 1 atm

= 2280/780

= 3 atm

The formula is

PV= nRT

The next step is to write out the parameters

Pressure= 3 atm

Temperature= 21 °C

no of moles= 32.1 mole

volume= ?

(r)constant= 8.314

3 × v= 32.1×8.314×21

3v= 81.080

V= 81.080/3

V= 27 ml

Hence the volume of the gas is 27 ml

Please see the link below for more information

https://brainly.com/question/15568262?referrer=searchResults

Answer:

447.64 grams

Explanation:

To find the mass when given moles, it is a pretty simple process.

I start by finding the molar mass of chloric acid, which comes out to 84.46 grams/mol. To find the MM (molar mass), you just take the mass of each element in the molecule from the periodic table and add them all together.

After this, you set up the equation by taking the moles given and multiplying it by the molar mass. This gives you the new value in grams (since we cancelled out the moles). I have attached my work below.

I hope this helps! :^)

The mass of 5.3 moles chloric acid has been 447.85 g.

The mass of 1 mole of a compound has been equivalent to the molar mass of the compound. The molar mass of a compound has been the sum of the constituent atoms in a formula unit.

The molar mass (mwt) of chloric acid has been given as:

[tex]mwt=m_H\;+\;m_C_l\;+\;(m_O\;\times\;3)[/tex]

By substituting the values for the mass of constituent atoms, the molar mass has been given as:

[tex]mwt=1\;+\;35.5\;+\;16\;\times\;3\\mwt=36.5\;+\;48\\mwt=84.5[/tex]

The molar mass of chloric acid has been 84.5 g/mol.

The mass of 1 mole of chloric acid has been 84.5 g/mol. The mass of 5.3 moles chloric acid has been:

[tex]\rm 1\;mol=84.5\;g\\5.3\;mol=5.3\;\times\;84.5\;g\\5.3\;mol=447.85\;g[/tex]

The mass of 5.3 moles chloric acid has been 447.85 g.

For more information about molar mass, refer to the link:

https://brainly.com/question/12127540

Answer:

C

Explanation:

The azimuthal quantum number can take values from 0 to (n-1)

So in answer C n= 3, l can take values between 0

and 2.

l can't be 3.

ml can take values from -l to +l.

Hope you understood

Answer :

[tex] \: [/tex]

Concentration of Solutions

Recall that a solution consists of two components: solute (the dissolved material) and solvent (the liquid in which the solute is dissolved). The amount of solute in a given amount of solution or solvent is known as the concentration. The two most common ways of expressing concentration are molarity and molality.

Molarity

The molar concentration (M) of a solution is defined as the number of moles of solute (n) per liter of solution (i.e, the volume, V solution):

M = n / V solution

The units of molarity are mol/L, often abbreviated as M.

For example, the number of moles of NaCl in 0.123L of a 1.00M solution of NaCl can be calculated as follows:

[tex]0.123 \: l \: \: of \: solution \: \times \: \frac{1.00 \: mole}{1.00 \: l \: of \: solution \: } \: \\ = 0.123 \: moles[/tex]

Molality :

The molal concentration (m) of a solution is defined as the number of moles of solute (n) per kilogram of solvent (i.e., the mass of the solvent, msolvent):

[tex]m = \frac{n}{v \: solution} [/tex]

For example, the number of moles of NaCl dissolved in 0.123kg of H2O (the solvent), in order to make a 1.00m solution of NaCl, can be calculated as follows:

[tex]0.123 \: kg \: of \: solvent \: = \frac{1.00 \: mole}{1.00 \: kg \: of \: solvent \: } \\ = 0.123 \: moles[/tex]

Answer:

chu papi

Explanation:

Answer:

Every amino acid also has another atom or group of atoms bonded to the central atom known as the R group. This R group, or side chain, gives each amino acid proteins specific characteristics, including size, polarity, and pH.

Explanation:

The R group is another atom or group of atoms that is attached to the core atom in every amino acid. This R group, or side chain, provides each amino acid protein with unique properties such as size, polarity, and pH.

Amino acids are chemical molecules that are used to construct proteins. Proteins are vital macromolecules in living organisms, serving a variety of functions including enzymatic catalysis, structural support, transportation, immunological response, and others. A polypeptide chain is formed by linking amino acids in a precise sequence, which subsequently folds into a three-dimensional structure to make a functioning protein.

To know more about amino acid, here:

https://brainly.com/question/31872499

#SPJ3

Answer:

Your answer would be 6

Answer:

1 it is 1

Explanation:

Answer:

i think its D

Explanation:

In order to get maximum accuracy, student should take average of results from all four trials.

Accuracy  in terms of chemistry can be defined as to how close a measurement is to the true value.There are three types of accuracy:

1) Point accuracy-It means accuracy is present at that point of scale only.It does not give any information about the accuracy of the instrument.

2)Percentage of true value--It is the accuracy  which is determined by identifying accuracy of the instrument  and comparing it with the measured true value.

3)Percentage of scale range- It is the accuracy  which determines accuracy of the measurement.

Accuracy in case of instruments  is neglected up  to ±0.5 percent.Accuracy of measurements can be increased by taking multiple measurements and taking into account human errors.

Learn more about accuracy,here:

https://brainly.com/question/15276983

#SPJ2

Explanation:

E = hf

c= f × lamda

f= c/ lamda

c= speed of light

f= frequency

lamda = wavelength

E = h c/ lamda

E = 6.626 × 10^-34 Js × 3 × 10^8 ms-1 / 589 × 10^-9 m

= 3.37 × 10^15 J

Answer: its a and b

Explanation:its very simple and the reason is bc yea

Answer:

B

Explanation:

The answer is B because it said subduction i guess. And I got it right! Hope this helps to anyone that is looking at this!

Answer:

I think it's C. hope this helps:)

Answer:

it undergoes a chemical change

Answer:

The dipole forces (particularly H-bonds) that keep polar solute molecules together can be replaced by polar solute-solvent interactions, so substances that are predominantly polar (like glucose) dissolve in polar solvents like water but not in nonpolar solvents like hexane (H-bonds).

Explanation:

no I will not please put you because that's the god of the Bible

Metals are good conductors of heat and electricity, and are malleable (they can be hammered into sheets) and ductile (they can be drawn into wire).

Nonmetals are (usually) poor conductors of heat and electricity, and are not malleable or ductile; many of the elemental nonmetals are gases at room temperature, while others are liquids and others are solids. 

The metalloids are intermediate in their properties.  In their physical properties, they are more like the nonmetals, but under certain circumstances, several of them can be made to conduct electricity.

hope this answer helped u, if u can pls mark me as the brainliest. :)

Answer:

In the previous section, we discussed the relationship between the bulk mass of a substance and the number of atoms or molecules it contains (moles). Given the chemical formula of the substance, we were able to determine the amount of the substance (moles) from its mass, and vice versa. But what if the chemical formula of a substance is unknown? In this section, we will explore how to apply these very same principles in order to derive the chemical formulas of unknown substances from experimental mass measurements.

Explanation:

tally. The results of these measurements permit the calculation of the compound’s percent composition, defined as the percentage by mass of each element in the compound. For example, consider a gaseous compound composed solely of carbon and hydrogen. The percent composition of this compound could be represented as follows:

\displaystyle \%\text{H}=\frac{\text{mass H}}{\text{mass compound}}\times 100\%%H=

mass compound

mass H

×100%

\displaystyle \%\text{C}=\frac{\text{mass C}}{\text{mass compound}}\times 100\%%C=

mass compound

mass C

×100%

If analysis of a 10.0-g sample of this gas showed it to contain 2.5 g H and 7.5 g C, the percent composition would be calculated to be 25% H and 75% C:

\displaystyle \%\text{H}=\frac{2.5\text{g H}}{10.0\text{g compound}}\times 100\%=25\%%H=

10.0g compound

2.5g H

×100%=25%

\displaystyle \%\text{C}=\frac{7.5\text{g C}}{10.0\text{g compound}}\times 100\%=75\%%C=

10.0g compound

7.5g C

×100%=75%

Answer:

We can say that we need 171 g barium hydroxide needed to make one model equals solution.

Explanation:

I hope this answered your question.

171 gram of  Ba(OH)2, in grams, is needed to make a 1.00 m aqueous solution.

Mass is the quantity of matter. The mass is calculated by the density divide by the volume.

In 1.00 solution, the mass of Ba(OH)2 is 171 gram.

Thus, the mass of Ba(OH)2 is 171 gram.

Learn more about mass

https://brainly.com/question/19694949

#SPJ2