Temperature and salinity difference in ocean water cause...

ok so i dont know srry5

Answer:

Explanation:

Average velocity = Total displacement / total time

Average speed = total distance covered / total time

a )

For the entire trip from your front door to the bench

Total displacement = 55 - 35 = 20 m  [ first displacement is positive and second displacement is negative , because second displacement is in opposite direction ]

Total displacement = 20 m

Total time = 30 + 36 = 66 s

Average velocity = 20 / 66

= .303 m / s

b )

For the entire trip from your front door to the bench

Total distance covered  = 55 + 35 = 90  m

Total time = 30 + 36 = 66 s

Average speed  = 90 / 66

= 1.36  m / s

Answer:

  E = V / d

Explanation:

In a charged capacitor an electric field is established that goes from the positive to the negative plate, this field is constant,

the potential difference is

           D = E d

in this case they do not give the difference in potential V and the distance between the plates d

           E = V / d

Answer: ITS 1 TRUST ME MAN BYE K

Explanation: OK BYE TRUST YEAH

HERE IS YOUR ANSWER!

Answer:

a) 36°

b) 0.109 kg

Explanation:

Heat flows from brass to copper with the brass having its temperature

Length of brass = 0.4

Length of copper = 0.8

Temperature of = 36.15

See attachment for calculation

The temperature at the joint is 36.15°C

The amount of ice melted is 1.086 kg

The rate of transfer of thermal energy,

   H = Q/t = KAΔT/L

  where, K is the thermal conductivity of the substance, A is cross-sectional area, ΔT is temperature difference at the ends and L is the length

As given in the question,

  the length of the brass section   [tex]L_{1}[/tex] = 0.4 m

  it's thermal conductivity      [tex]K_{b}[/tex] = 109 J[tex]s^{-1}m^{-1}K^{-1}[/tex]

  the temperature at the brass end  [tex]T_{1}[/tex] = 373K

  the length of the copper section [tex]L_{2}[/tex] = 0.8 m

  it's thermal conductivity      [tex]K_{c}[/tex] = 385 J[tex]s^{-1}m^{-1}K^{-1}[/tex]

  the temperature at the brass end  [tex]T_{1}[/tex] = 273K

 cross-sectional area of both the substance is same A = 0.007 [tex]m^{2}[/tex]

  Let the temperature at the joint be T

The rate of heat flow must be constant across the whole length of the setup.

Hence at the joint,

   [tex]\frac{K_{b}A(T_{1}-T) }{L_{1} } =\frac{K_{c}A(T-T_{2}) }{L_{2} }[/tex]

⇒ [tex]\frac{ 109*A*(373-T)}{0.4} =\frac{385*A(T-273)}{0.8}[/tex] ⇒ T=309.15 K

⇒ T = 36.15°C is the temperature at the joint.

Now we have to calculate the equivalent thermal conductivity K of the setup in order to calculate the amount of heat transfer.

considering equivalent thermal conductivity K throughout the setup we can form the following equation to calculate its value

   [tex]\frac{KA(T_{1}-T_{2} ) }{L_{1}+L_{2} } =\frac{K_{c}A(T-T_{2}) }{L_{2} }[/tex]

   ⇒   [tex]\frac{ K*A*(100)}{1.2} =\frac{385*A(36.15)}{0.8}[/tex]

   ⇒  K = 208.76 J[tex]s^{-1}m^{-1}K^{-1}[/tex]

the amount of heat transferred at the copper end in ice-water mixture in 5 minutes(300 seconds) :

        Q = [tex]\frac{KA(T_{1}-T_{2} ) }{L_{1}+L_{2} }[/tex] × t =  [tex]\frac{208.76*0.007*100}{1.2}[/tex] × 300 = 36533 J

        latent heat of fusion of ice [tex]L_{f}[/tex] = 33600 J/kg

         [tex]Q=mL_{f}[/tex]

         [tex]m=\frac{Q}{L_{f} }[/tex]

         [tex]m=\frac{36533}{33600}[/tex] ⇒ m = 1.086 kg of ice is melted in 5 minutes

Learn more about heat transfer:

https://brainly.com/question/20725399?referrer=searchResults

Answer:

Explanation:

Angle of incidence at the longer face = 45⁰ ( see the figure in the attached file )

For total reflection from longer face

i = C where C is critical angle .

And relation between critical angle and refractive index is as follows .

μ = 1 / sinC

= 1 / sin45

= √2

= 1.414 .

Answer:

30.4 s

Explanation:

A pilot , with plane accelerated at 4 g starts greying out . In the problem , the acceleration of jet is 4 g

a = 4 x 9.8 = 39.2 m /s²

initial velocity u = 0

Final velocity = 3.60 times speed of sound

= 3.6 x 331 = 1191.6 m /s

v = u + at

Putting the values

1191.6 = 0 + 39.2 t

t = 30.4 s .

Answer:

F = 614913.88 N

Explanation:

We are given;

Mass of pile driver; m = 1800 kg

Height of fall of pole driver; h = 4.6 m

Depth driven into beam; d = 13.6 cm = 0.136 m

Now, from energy equations and applying to this question, we can write that;

Workdone = Change in potential energy

Formula for workdone is; W = F × d

While the average potential energy here is; W = mg(h + d)

Thus;

Fd = mg(h + d)

Where F is the average force exerted by the beam on the pile driver while in bringing it to rest.

Making F the subject, we have;

F = mg(h + d)/d

F = 1800 × 9.81 × (4.6 + 0.136)/0.136

F = 614913.88 N

Answer:

The heavier the object and the higher it is above the ground, the more gravitational potential energy it holds. Gravitational potential energy increases as weight and height increases. Potential energy is energy that is stored in an object or substance.

Answer:

Explanation:

.....

Answer:

no kinetic energy

hope this helps! :-D

Explanation:

the monk is not moving

Answer:

case A) tau_net = -243.36 N m, case B)    tau_net = 783.36 N / m,      tau_net = -63.36 N m,  case C)  tau _net = - 963.36 N m,

Explanation:

For this exercise we use Newton's relation for rotation

         Σ τ  = I α

In this exercise the mass of the child is m = 28.8, assuming x = 1.5 m, the force applied by the man is F = 180N

we will assume that the counterclockwise turns are positive.

case a

         tau_net = m g x - F x2

          tau_nett = -28.8 9.8 1.5 + 180 1

         tau_net = -243.36 N m

in this case the man's force is downward and the system rotates clockwise

case b

2 force clockwise, the direction of

 the force is up

          tau_nett = -28.8 9.8 1.5 - 180 2

          tau_net = 783.36 N / m

in case the force is applied upwards

3) counterclockwise

        tau_nett = -28.8 9.8 1.5 + 180 2

         tau_net = -63.36 N m

system rotates clockwise

case c

2 schedule

 tau_nett = -28.8 9.8 1.5 - 180 3

 tau _net = - 963.36 N m

3 counterclockwise

       tau_nett = -28.8 9.8 1.5 + 180 3

       tau_net = 116.64 Nm

the sitam rotated counterclockwise

Answer: 30 Years Old

Explanation: The constitution has around three qualifications for service in the U.S. Senate, Your age must be at least 30 years.

Answer:

hello your question is incomplete attached below is the complete question

answer :

20.16 v

Explanation:

The reading of the voltmeter at the instant the switch returns  to position a

L = 5H

i ( current through inductor ) = 1/L ∫ V(t) d(t) + Vo

                                               = 1/5 ∫ 3*10^-3  d(t)  + 0 = 0.6 * 10^-3 t

iL ( 1.6 s ) = 0.6 * 10^-3 * 1.6 = 0.96 mA

Rm ( resistance ) = 21 * 1000 = 21 kΩ

 The reading of the voltmeter ( V )

V = IR

   = 0.96 mA * 21 k Ω  = 20.16 v

Answer:

The distance from the positive plate at which the two pass each other is 0.0023 cm.

Explanation:

We need to find the acceleration of each particle first. Let's use the electric force equation.

[tex]F=Eq[/tex]

[tex]ma=Eq[/tex]

For the proton

[tex]m_{p}a_{p}=Eq_{p}[/tex]

[tex]a_{p}=\frac{Eq_{p}}{m_{p}}[/tex]

[tex]a_{p}=\frac{646*1.6*10^{-19}}{1.67*10^{−27}}[/tex]

[tex]a_{p}=6.19*10^{10}\: m/s^{2}[/tex]

For the electron

[tex]m_{e}a_{e}=Eq_{e}[/tex]

[tex]a_{e}=\frac{Eq_{e}}{m_{e}}[/tex]

[tex]a_{e}=\frac{646*1.6*10^{-19}}{9.1*10^{−31}}[/tex]  

[tex]a_{e}=1.14*10^{14}\: m/s^{2}[/tex]

Now we know that the plate separation is 4.26 cm or 0.0426 m. The travel distance of the proton plus the travel distance of the electron is 0.0426 m.

[tex]x_{p}+x_{e}=0.0426[/tex]

Both of them have an initial speed equal to zero. So we have:

[tex]\frac{1}{2}a_{p}t^{2}+\frac{1}{2}a_{e}t^{2}=0.0426[/tex]

[tex]t^{2}(a_{p}+a_{e})=2*0.0426[/tex]

[tex]t^{2}=\frac{2*0.0426}{a_{p}+a_{e}}[/tex]

[tex]t=\sqrt{\frac{2*0.0426}{6.19*10^{10}+1.14*10^{14}}}[/tex]

[tex]t=2.73*10^{-8}\: s[/tex]    

With this time we can find the distance from the positive plate (x(p)).

[tex]x_{p}=\frac{1}{2}a_{p}t^{2}[/tex]

[tex]x_{p}=\frac{1}{2}6.19*10^{10}*(2.73*10^{-8})^{2}[/tex]

[tex]x_{p}=0.0023\: cm[/tex]

Therefore, the distance from the positive plate at which the two pass each other is 0.0023 cm.

I hope it helps you!

Answer:

The answer is below

Explanation:

Let a be the initial velocity of motorcycle A and b be the initial velocity of motorcycle B.

After 5.68 seconds, both motorcycle had the same velocity (v), therefore for motorcycle A:

(a - v) / 5.68 = 3.87

a - v = 21.9816

v = a - 21.9816

For motorcycle B:

(b - v) / 5.68 = 18.2

b - v = 103.376

v = b - 103.376

Therefore:

a - 21.9816 = b - 103.376

b - a = -21.9816 + 103.376

b - a = 81.3944

a) The difference between their speeds at the beginning was 81.3944 m/s

b) Since b - a = 81.3944. This means that the initial velocity of motorcycle B is greater than that of motorcycle A by 81.3944 m/s.

Therefore motorcycle B was moving faster

maybe a spectrograph ?

Answer:

c

Explanation:

Answer:

a

Explanation:

i just took the test

Answer:

Explanation:

Total solar energy falling on total surface per second

= 410 x  820 W

= 336200 W

10 % of 336200 = 33620 J is converted into heat which is absorbed by lake water . But its temperature does not rise because heat is used up in evaporating water in the form of vapor .

Total heat released during evaporation = 33620 J

Let evaporation rate be m gram /s

heat absorbed by m gram water = m x latent heat of evaporation

= m x 2260 J .

Given ,

m x 2260 = 33620

m = 14.87 g /s .

Answer:

26.9444m/s

pls brainliest

Answer:

the sign and magnitude of the charge is - 2 x 10⁻⁵ C.

Explanation:

Given;

mass of the particle, m = 1.43 g = 0.00143 kg

electric field experienced by the particle, E = 700 N/C

The force experienced by the particle is calculated as;

F = mg = EQ

Where;

Q is the magnitude of the charge

[tex]Q = \frac{mg}{E} \\\\Q = \frac{0.00143 \times 9.8}{700} \\\\Q = 2\times 10^{-5} \ C[/tex]

The force must be upward in opposite direction to the electric field. Since the force and the electric field are in opposite direction, the charge must be negative.

Therefore, the sign and magnitude of the charge is - 2 x 10⁻⁵ C.

The particle to remain stationary, when placed in a downward-directed electric the force must be in opposite direction which upward directed.

The charge of the given particle to remain stationary should be [tex]-2\times10^{-5}[/tex] C.

The electric force experienced by the body when placed it into the electromagnetic field is called electric charge.

Given information-

The mass of the particle is 1.43 g or 0.00143 kg.

The magnitude of the downward-directed electric field is 700 N/C.

The magnitude of the free-fall acceleration is 9.80 meter per second squared.

The electric field is defined as the electric force per unit charge. It can be given as,

[tex]E=\dfrac{F}{q}[/tex]

Rewrite the equation for the charge,

[tex]q=\dfrac{F}{E}[/tex]

Force experienced by the particle is equal to the product of mass and free fall acceleration (gravity). Thus,

[tex]q=\dfrac{0.00143\times9.8}{700}\\q=2\times10^{-5}[/tex]

Thus the magnitude of the charge is [tex]2\times10^{-5}[/tex] C.

The particle to remain stationary, when placed in a downward-directed electric the force must be in opposite direction which upward directed. For the opposite direction the sign of the charge should be negative.

Thus the charge of the given particle to remain stationary should be [tex]-2\times10^{-5}[/tex] C.

Learn more about the electric charge here;

https://brainly.com/question/14372859

Answer:

c. The roller coaster is in uniform circular motion

Explanation:

Since the loop is circular with radius r, and its instantaneous speed, v is always constant, and also, its centripetal acceleration, a' = v²/r.

Since the angular speed, ω = v/r does not change, the magnitude of its  tangential acceleration is zero although there is a change in its direction because the direction of its initial velocity changes. That is a" = rα and α = Δω/Δt since Δω = 0, α = 0 and a" = r(0) = 0

So, there is no tangential acceleration. Since there is no tangential acceleration, our instantaneous acceleration which is the vector sum of our centripetal acceleration and tangential acceleration is a = √(a'² + a"²) =  √(a'² + 0²) = √a'² = a' = v²/r

So, a is always v²/r.

Since the instantaneous acceleration is always (a = v²/r) constant, the motion is uniform. So, it is uniform circular motion.

The roller coaster is not in uniform circular motion, and [tex]a = \frac{v^2}{r}[/tex] is only applicable at the very top and bottom of the loop where the tangential acceleration vanishes.

The given parameters;

The motion tension on the loop at the lowest point in the circular motion is given as;

[tex]T = mg + \frac{mv^2}{r}[/tex]

The motion tension on the loop at the highest point in the circular motion is given as;

[tex]T = \frac{mv^2}{r} - mg[/tex]

This shows that circular motion is affected by;

Thus, we can that the roller coaster is not in uniform circular motion, and [tex]a = \frac{v^2}{r}[/tex] is only applicable at the very top and bottom of the loop where the tangential acceleration vanishes.

Learn more here:https://brainly.com/question/14672628

Answer:−4.05

Explanation:

Answer:

i Believe the correct answer is "An open circuit being changed into a closed circuit"

Explanation:

Answer:

The energy is transferred to chemical and heat energy.

Explanation:

If you define "bouncing" as leaving the ground for any amount of time, the ball stops bouncing when the elastic energy stored in the compression phase of the bounce is not enough to overcome the weight of the ball. This is the proof of the answer i Hope this helps :)