Technician A says that leather shoes offer more protection than canvas shoes. Technician B says that steel toed boots are essential to protecting your feet from injury. Which technician is correct?

A) Technician A only B) Technician B only

C) Both technicians A and B D) Neither technician A nor B

Answer:

21.3V

Explanation:

Explanation

E = V + Ir

V = E- Ir

V = 24 - {(24/36) x 4}

V = 21.3V

Answer:

A

Explanation:

the air is the medium man

Answer:

the desk

Explanation:

Answer:

wave speed =344.1 m/s

using v=fΠ

where v is the speed

The wave speed will be 344.1 m/sec. The wave speed is found as the product of the wavelength and the frequency of the wave.

The distance between two successive troughs or crests is known as the wavelength. The peak of the wave is the highest point, while the trough is the lowest.

The wavelength is also defined as the distance between two locations in a wave that have the same oscillation phase.

The given data in the problem is;

v is the speed = ?

f is the frequency= 370 Hz

λ is the wavelength of the wave=0.96 m

The relationship between the wave's wavelength, frequency, and speed is given as;

wavelength = speed of wave / frequency

[tex]\rm \lambda = \frac{v}{f} \\\\ v = \lambda \times f \\\\ v = 0.93 \times 370 \ Hz \\\\ v= 344.1 \ m/sec[/tex]

Hence, the wave speed will be 344.1 m/sec.

To learn more about the wavelength, refer to the link;

brainly.com/question/7143261

#SPJ2

Answer:Explanation:

A common example of sublimation is the dry ice, heavy CO2.

Answer: Measurement is the assignment of a number to a characteristic of an object or event, which can be compared with other objects or events. The scope and application of measurement are dependent on the context and discipline. In the natural sciences and engineering, measurements do not apply to nominal properties of objects or events, which is consistent with the guidelines of the International vocabulary of metrology published by the International Bureau of Weights and Measures. However, in other fields such as statistics as well as the social and behavioural sciences, measurements can have multiple levels, which would include nominal, ordinal, interval and ratio scales.

Explanation:

A current of 15 amperes is flowing with a resistance of 0.10 ohms, then the voltage will be equal to 1.5 volts.

When put in an electromagnetic field, charged matter experiences a force due to the fundamental property of electric charge. Positive or negative electrical ions are possible.

When two charges are in opposition to one another, they repel one another. The term "neutral" refers to an object that has no net charge. The early understanding of the way charged particles interact is now referred to as classical electrodynamics, and it is still true for issues that do not demand taking into account quant phenomena.

Electrical charge is a preserved attribute, meaning that the net charge of an isolated system—that is, the sum of the positive and negative charges—cannot change. Particles at the subatomic level carry an electric charge.

As per the data given in the question,

Current, I = 15 A

Resistance, R = 0.10 ohms

Then, the voltage (V) will be,

V = RI

V = 15 × 0.10

V = 1.5 volts.

To know more about Electrical energy:

https://brainly.com/question/16182853

#SPJ2

Answer:

We have a mass of 200g (0.2kg) moving at 20m/s

Kinetic Energy KE = ½ mv^2 where m is mass and v is velocity

Actually, v is a vector quantity, so KE = ½ mv•v

The dot product of 2 vectors a and b is abCosθ where θ is the angle between the vectors.

Obviously v•v = v^2 Cos0 = v^2

In this case, we have KE = ½ (0.2)(20^2) = 40kg-m^2/s^2 = 40J

So we have kinetic energy in the amount of 40 Joules.

Explanation:

The right answer is "2.7 J"

Answer explanation:

Remember to convert grams to kilograms first by dividing by 1000.

Kinetic energy

= 1/2 × mass × speed2

= 1/2 × 0.2 kg × (5.2 m/s)^2

= 2.7 J (to 2 sig. fig.)

Hope it helps ✨✨

Answer:

electrons will flow from lower (lithium) to higher (zinc)

You can make a stronger battery by having a larger electron affinity difference.

Hope this helps \(-._.-)/

Answer:

inner planets are the first couple of planets by the sun so for the character for the internal planets are what they are like are they made up of gas, rock/solid stuff and the atomsphere is like is it toxic or safe to breath

Answer:

Vaporization occurs when a substance changes from a liquid to a gas. The molecules in a liquid are in constant motion while staying relatively close together due to intermolecular forces. When an increase in temperature occurs, the molecules' kinetic energy also increases. If a liquid is heated the particles are given more energy and move faster and faster expanding the liquid. The most energetic particles at the surface escape from the surface of the liquid as a vapor as it gets warmer. Liquids evaporate faster as they heat up and more particles have enough energy to break away.

Mark Me Brainliest If u Found it helpful

===========================================================

Explanation:

Consider a mass of 10 kg, so m = 10

Let's say we apply a net force of 20 newtons, so F = 20

The acceleration 'a' is...

F = ma

20 = 10a

20/10 = a

2 = a

a = 2

The acceleration is 2 m/s^2. Every second, the velocity increases by 10 m/s.

---------------

Now let's double the net force on the object

F = 20 goes to F = 40

m = 10 stays the same

F = ma

40 = 10a

10a = 40

a = 40/10

a = 4

The acceleration has also doubled since earlier it was a = 2, but now it's a = 4.

---------------

In summary, if you double the net force applied to the object, then the acceleration doubles as well.

Acceleration is directly proportional to the net force on an object, and inversely proportional to its mass.

So if an object's mass stays the same while the net force on it doubles, then its acceleration will also double.

We don't know anything about the "trials".  This sounds like it might be a follow-up to a lab experiment that was performed when we weren't there.

We also don't know anything about "question 1".

Answer:

Explanation:

1). Distance traveled during the first minute (A-B)

    = Distance from A to C + Distance from C to D + Distance from D to B

    = 40 + 100 + 40

    = 180 m

   Option (4) will be the answer.

2). Displacement after first minute (A-B)

    = Distance from A to B

    = 180 m East

    Option (2) is the answer.

3). Distance traveled during the first 2 minutes (A - B - C)

    = Distance from A to B + Distance from B to C

    = 180 + 140

    = 320 m

    Option (3) will be the answer.

4). Displacement after first 2 minutes (A-B-C)

    = Distance between A and C

    = 40 m towards east

    Option (1) is the answer.

5). Distance traveled during 3 minutes (A-B-C-D)

    = Distance between A to B + Distance between B to C + Distance between C to D

    = 180 + 140 + 100

    = 420 m

   Option (4) is the answer.

6). Displacement after total 3 minutes (A-B-C-D)

    = Distance between A and D

    = Distance between A to C + distance between C to D

    = 40 + 100

    = 140 m

     And the direction is towards East.

     Option (3) is the answer.

Answer:

1) False, since constant speed means constant velocity, but with constant direction as well. Velocity is speed with direction. When you move in a circle, there are boundaries which means that a constant moving speed will cause the object to veer(move in different directions) to maintain movement, If it doesn't veer, the object will deflect(rebound) off the surface due to friction, and impact force or depending on its physical bond of malleability or density.

2a) Create position vectors by drawing a ray from the center(origin) of the circle to each of your desired points, it's magnitude will be the radius(how convenient). Both of these vectors go from the center of the circle to the position on the circle. In general, the distance from the origin to a point is called the radius vector.

2b)

Answer:

42 hour

Explanation:

It is given that,

Speed of a car, v = 40 mph

Distance covered by the car, d = 1680 miles

We need to find the time taken by the car to cover this distance. We can find it using the formula of speed which is equal to the distance covered divided by the time taken. Let the time is t.

speed = distance/time taken

[tex]t=\dfrac{d}{s}\\\\t=\dfrac{1680\ \text{miles}}{40\ \text{mph}}\\\\t=42\ \text{hour}[/tex]

Hence, the car will take 42 hours to cover 1680 miles with a speed of 40 mph.

Answer:

True

Explanation:

The term 'plyometrics' is used interchangeably with the term 'jump training'. The technique can be used for training in sports that require explosive movements.

Answer:

v = gt

Explanation:

From the question given, we obtained the following information:

Initial velocity (u) = 0 m/s

Acceleration due to gravity (g) = g

Time (t) = t

Final velocity (v) =.?

Thus, we can obtain the velocity as illustrated below:

v = u + gt

v = 0 + gt

v = gt

Thus, the equation for the velocity is

v = gt

Answer:

It will roll up to its initial height from which it rolled from on the first hill

Explanation:

The given information are;

The height from which the ball is rolled = 3 feet[

The equation of the potential energy of the ball as it rolled down the frictionless inclined plane is given by the following equation;

m × g × h₁ = 1/2 × m × v² + 1/2×[2/5× m × r²) × [v/r]

Where;

m = The mass of the ball

h = The from which the ball is rolled down

v = The velocity of the ball

r = The radius of the ball

Therefore, all the potential energy, m × g × h, is converted into kinetic energy when the ball reached the ground

Similarly, as the ball rolls up on the other side, by the principle of energy conservation, all the kinetic energy is transformed into potential energy as follows

1/2 × m × v² + 1/2×[2/5× m × r²) × [v/r] = m × g × h₂, therefore, we have;

1/2 × m × v² + 1/2×[2/5× m × r²) × [v/r] = m × g × h₁ =  m × g × h₂

Therefore since m × g × h₁ =  m × g × h₂, then h₁ = h₂, the ball rises to the same height it started rolling from on the first hill.

Answer:

A

Explanation:

I know that it's true

d) ≈ 0.87 m/s²

Hi there !

F = m×a => a = F/m

a = 59N/68kg

1 N = 1kg·m/s²

= (59kg·m/s²)/68kg

= 0.8676 m/s²

≈ 0.87 m/s²

Good luck !

Answer:

situational irony

Explanation:

Based on the scenario being described, this seems to be an example of situational irony. That is because the irony in this scenario is that Tim's most popular and world-renown cooking creations are made of meat but Tim is a vegan and does not consume meat, which all revolves around the situation that Tim is in. Since he can't enjoy the meals with his fans because he does not eat the ingredients in his own creation. Therefore, being specific to the situation that Tim has created.

Answer:

The soccer discs will be change.

Explanation:

Given that,

Opposing force = 5 N

We know that,

Drag force :

Drag force is directly proportional to the square of velocity.

[tex]F_{d}\propto v^2[/tex]

[tex]F_{d}=\dfrac{1}{2}C\rho Av^2[/tex]

Where, C = drag constant

[tex]\rho[/tex] = density

A = area

v= velocity

We need to find what happen to  the soccer discs velocity

According to drag force,

If we applies a force of 5 N opposing the motion of the disc then the velocity of the soccer discs will be change.

Hence, The soccer discs will be change.

Answer:

Physical change

Explanation:

A physical change can be reversible where the original form of the matter can be restored, or irreversible where the original form cannot be restored. Therefore, sawdust is a physical change.

Answer:

Wavelength

Explanation:

The distance between two crests or two troughs on a transverse wave is known as the wavelength.

The wavelength of a periodic wave is its spatial period or the distance over which the wave's structure repeats. It's the distance between two adjacent corresponding points of the same phase on the wave, such as two adjacent crests, troughs, or zero-crossings, and it's a feature of both travelling and standing waves, as well as other spatial wave patterns.

As discussed above the wavelength, therefore, the distance between two crests or two troughs on a transverse wave is known as the wavelength.

Learn more about Wavelength:

https://brainly.com/question/13533093

Answer:

According to Newton's third law of motion, the reaction force is equal to the action force.

Explanation:

Newton's third law of motion states that for every action there is an equal and opposite reaction. This means that if one object exerts a force on a second object, the second object exerts an equal force in the opposite direction. When Plate X pushes on Plate Y with the action force (Fx), Plate Y must push back with an equal force (Fy).

Therefore, the best explanation is that according to Newton's third law of motion, the reaction force is equal to the action force.

For every action, there has equal and opposite reaction - this statement best describes the action and reaction forces on the plates.

As a result of this interaction, there are two forces: one from plate X and one from plate Y. The third law of motion of Newton deals with these two forces, which are referred to as action and reaction forces. Newton's third law is officially expressed as follows: There is an equal and opposite reaction to every action.

The implication of the statement is that there are always two forces acting on the two interacting objects. The force acting on the first object is equal in size to the force acting on the second. The force acting on the first object is acting in the opposite direction to the force acting on the second object. Force pairs—equal and opposing action-reaction force pairs—always exist in pairs.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ5

Answer:

By observing the time between transits, we know the orbital period. Kepler's Third law can be used to determine the orbital radius of the planet if the mass of the orbiting star is known (R3=T2−Mstar/Msun, the radius is in AU and the period is in earth years).

Explanation:

hope this helps!

Answer: true

Plz mark brainliest:)

Answer:

160,934.4 cm or in other words *160,934*

Explanation:

1 mile = 5280 ft.

5280 ft. = 63360 in.

63360 in. = 160934.4

Answer: C. Trial 3

Explanation:

Trial 1 and 2 equal 1.5, Trial 3 equals 1 and Trial 4 equals 3. Trial 3 is the smallest current .

The trial for which the students would measure the smallest current is the circuit is trial 2 and trial 3.

To know the trial which generates the smallest current, we need to determine the current in each trial.

Since current I = V/R where V = voltage and R = resistance.

For trial 1, V = 1.5 V and R = 200 Ω

So, I = 1.5 V/200 Ω

= 0.0075 A

= 7.5 mA

For trial 2, V = 1.5 V and R = 100 Ω

So, I = 1.5 V/100 Ω

= 0.015 A

= 15 mA

For trial 3, V = 3 V and R = 200 Ω

So, I = 3 V/200 Ω

= 0.015 A

= 15 mA

For trial 4, V = 3 V and R = 100 Ω

So, I = 3 V/100 Ω

= 0.03 A

= 3 mA

Trial 2 and trial 3 both produce a the smallest current of 15 mA.

So, the trial for which the students would measure the smallest current is the circuit is trial 2 and trial 3.

Learn more about current here:

https://brainly.com/question/996480