Answer:
A
Explanation:
Tech A states that the system should be flushed if the compressor came apart. Tech B states that the system should be flushed if the oil is contaminated. Therefore, both Tech A and Tech B are correct.
What component Cannot be flushed?Accumulators, receiver driers, lines, and hoses with filters and mufflers CANNOT be flushed and must be substituted. Most modern flat-tube multi-pass and flat-tube serpentine condensers contain tiny internal passageways and CANNOT be flushed. Therefore, both Tech A and Tech B are correct.
To learn more about contaminated oil
https://brainly.com/question/14238959
#SPJ2
How much does it cost to repair a broken train? (Fill in the blanks)
True or False: Before completing an oil change, you will first need to do an oil level and clarity inspection
In___cutting, the torch is held and moved by a mechanical device and manually adjusted by the welder.
It is common practice to tin plate electrical terminals to facilitate soldering. Why is it tin that is used?
Answer: Its materials are good reactors with electrical terminals and most times we go the easy way
Explanation:
I have five brainliest why is it only showing 2?
Answer: Either your computer is malfunctioning or it is glitched and still thinks you only have 2. Also good job
Explanation: Leave a brainliest it helps
what would be a potential problem when collecting wind energy?
Answer:
potential to reduce, fragment, or degrade habitat for wildlife, fish
Explanation:
As with all energy supply options, wind energy can have adverse environmental impacts, including the potential to reduce, fragment, or degrade habitat for wildlife, fish, and plants. Furthermore, spinning turbine blades can pose a threat to flying wildlife like birds and bats.
Give three reasons you feel the school should or should not rely on fossil fuels.
Answer:
To keep the community air clean, to set a good example for the students, to save money.
Explanation:
Using fossil fuels releases carbon into the air which is dangerous to inhale, the students of today and the near future will be the next generation of adults teaching them that it is okay to use them will lead us into a bad place. And newer sources of energy like solar, wind or chemical are money efficient because they take less money to sustain and schools are designed to be around for a long time.
A particular electromagnetic wave travelling in vacuum is detected to have a frequency of 3 × 10 12 Hz. How much time will it take to complete one cycle of this wave? Answer with solution
3×10^-12 seconds
Explanation:
T=1/f
what are some common work contexts for Licensing Examiners and Inspectors? Select four options.
in an open vehicle
telephone
face-to-face discussions
wear specialized safety equipment
contact with others
importance of being exact or accurate
According to O*NET, the common work contexts for Licensing Examiners and Inspectors include:
TelephoneFace-to-face discussionsContact with othersImportance of being exact or accurate.O*NET is an acronym for occupational information network and it refers to a free resource center or online database that is updated from time to time with several occupational definitions, so as to help the following categories of people understand the current work situation in the United States of America:
Workforce development professionalsStudentsHuman resource (HR) managersJob seekersBusiness firmsOn O*NET, work contexts are typically used to describe the physical and social elements that are common to a particular profession or occupational work. Also, the less common work contexts are listed toward the bottom while common work contexts are listed toward the top.
According to O*NET, the common work contexts for Licensing Examiners and Inspectors include:
1. Telephone
2. Face-to-face discussions
3. Contact with others
4. Importance of being exact or accurate.
Read more on work contexts here: https://brainly.com/question/22826220
Answer:
Telephone
Face-to-face discussions
Contact with others
Importance of being exact or accurate.
Explanation:
6. The welght limitation of the ladder refers to the TOTAL Welght of the Individual PLUS anything on the person.
A) O True
B) O False
Answer:
A) true promise that's is the real answer
Explanation:
ok po
Congress can pass laws concerning ___. (Select all that apply.)
Answer: What laws can Congress pass?
What Congress Does
Make laws.
Declare war.
Raise and provide public money and oversee its proper expenditure.
Impeach and try federal officers.
Approve presidential appointments.
Approve treaties negotiated by the executive branch.
Oversight and investigations.
Explanation:
Bacteria needs little to no moisture to grow rapidly. *
True
False
Answer:
false
Explanation: < hopes this help bb <3 >
please explain your answer
3. Whether an accident scene is safe or not, you should first take action to help any victims.
A) O True
B) O False
the tire restraining device or barrier shall be removed immediately from service for any of these defects except
Restraining devices and barriers shall be visually inspected on the rim wheel components or sudden release of contained air.
Restraining device means an apparatus such as a cage, rack, assemblage of bars and other components that will constrain all rim wheel components.
Restraining devices and barriers shall be visually inspected on the rim wheel components or sudden release of contained air. Any restraining device or barrier exhibiting damage such as the following defects shall be immediately removed from service.
Find out more on Restraining devices at: https://brainly.com/question/24647450
How could I build device that converts the blowing of wind into a form of energy a car could use?
true or false If 2 is a factor of y and 3 is a factor of y, then 6 is a factor of y
Answer:
True
Explanation:
The product of any subset of the factors of y is also a factor of y. If 2 and 3 are factors of y, then 2·3 = 6 is a factor of y.
The statement is true.
After hearing your brakes make a grinding noise, you decide to take your car to a mechanic. You go to a garage that is offering a great deal on brake jobs. He writes you out an estimate to replace the brake pads, and you leave the car with him. When you return at the end of the day, he submits a bill to you that is four times the estimate. He explains that you needed new rotors, but he could not reach you at the telephone number you left him to discuss the problem. What should you do?
Answer: If your brakes emit a sharp grinding sound while braking, it's likely that the brake disc and the caliper are rubbing together. ... The best way to fix this issue is to have your brake pads replaced immediately, but at this point, you may also need to replace the discs or rotors.
New brake pads are a bit stiff and need to be broken in. The process of breaking in new brake pads is referred to as bedding in. When your pads are being bedded in, you may hear some squealing, screeching, or grinding. But this noise should lessen as you drive your car and allow the pads to become worn in
Explanation: This is what I have found while conducting my research please leave a BRAINLIEST IF CORRECT IT IS APPRECIATED
Which statement is equivalent to the following? x = x * 2; x = x * x; x * 2; x *= 2; None of these
Answer:
x*=2
Explanation:
MARK ME AS A BRAINLIST PLZ
Timescale limits knowledge for scientists because it is difficult for them to see much beyond their lifetimes. Question 1 options: True False
Answer:
I think true
Explanation:
Well I mean...we cant see the future. Certain things will be achieveable in different ganerations like going on mars
select the four options involved in material analysis
weight
cost
shock resistance
synthetics
sustainability
resilience
Answer:
cost
Explanation:
i wish the anser is corecy
Fill in the Blank
Complete the sentence.
Autodesk provides 3-D design software with its popular ______ program, which has become an industry standard.
Answer:
CAD
Explanation:
CAD DESIGN SOFTWARE ALL ARE BASED AROUND AUTODESK
someone make me brainleist please
Answer:
okay will do
Explanation:
Buffy was shopping at her local home improvement store for a new kitchen faucet. She was attracted to a brushed stainless steel model with a long arc and a swivel spout. These are __________ features of the faucet.
An object can be described by using it's features.These are the physical features of the faucet.
Most object or things do have a lot of observable properties. These are: weight, size, shape, color, etc.
The Physical properties of an object consist of the shape, size, materials, etc. The Physical attributes is used to describe how the outcome of an object looks and feels. In the case of the faucet, it is a stainless steel with long arc.
Learn more about physical features from
https://brainly.com/question/4958905
What do Engineers aim to do
Answer:
Engineers design, evaluate, develop, test, modify, install, inspect and maintain a wide variety of products and systems.
Explanation:
Answer:
Engineers design, evaluate, develop, test, modify, install, inspect and maintain a wide variety of products and systems.
Explanation:
because I said so
Explain the differences between a two-stroke and a four-stroke engine
List 2 examples of a two-stroke engine
List 2 examples of a 4-stroke engine
What is one advantage of a 2-stroke engine and one disadvantage
What is one advantage of a 4-stroke engine and one disadvantage
I don't know the answer and where is the choices
Please read and answer each question carefully,
1. The weight limitation of the ladder refers to the TOTAL welght of the Individual PLUS anything on the person.
A) O True
B) O False
Answer:
A)true promise ayan po
paragraph for voice for humanity
Answer:
The Voice of Humanity by Rabindranath Tagore. ... A true universalist and a liberal, Tagore shot to international prominence when his book Gitanjali got him the Nobel Prize. From his adolescent days, Tagore's literary genius had begun to unravel. He loathed formal education imparted within the confines of a class room.Explanation:
please mark me brainliest mark me brainliest1. During a pandemic or other disease outbreak, what are some things employers and employees can do in the
construction Industry?
A) O Modify work schedules to stagger work times and reduce the number of workers in an area at a time
B) O Limit tool sharing
C) O Be prepared for temperature checks when arriving for a work shift
D) O All of the above
Next Page >>
Answer:
D
Explanation:
I'm not sure but they all make sense, I dont really know the context though.
What are the Three L's of Railroad Safety?
Answer:
Remember to cross train tracks ONLY at designated pedestrian or roadway crossings, and obey all warning signs and signals posted there. Stay alert around railroad tracks. Refrain from texting, headphones or other distractions that would prevent you from hearing an approaching train; never mix rails and recreation.
Explanation: