Take your time please.​

Answer:

.4 moles

Explanation:

this is if it's 35 grams

Answer:

78.12 L

Explanation:

Given that,

Initial volume, V₁ = 105 L

Initial temperature, T₁ = 20°C = 20+273 = 293 K

New temperature, T₂ = -55 °C = 218 K

We need to find the new volume of the balloon. The relation between the volume and the temperature is given by :

[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]

Where

V₂ is the new volume

[tex]V_2=\dfrac{V_1T_2}{T_1}\\\\V_2=\dfrac{105\times 218}{293}\\\\V_2=78.12\ L[/tex]

So, the new volume is 78.12 L.

Answer:

sp3 - 1,2,13,16,18,19

sp2- 3,4,5,6,7,8,9,10,11,12,14,15,17

sp- 0

Explanation:

Hybridization is the idea that atomic orbitals fuse to form newly hybridized orbitals, which in turn, influences molecular geometry and bonding properties (Chemlibretexts).

Carbon atoms that are singly bonded are sp3 hybridized, carbon atoms that are doubly bonded are sp2 hybridized while carbon atoms that are triply bonded are sp hybridized.

Sp3 hybridized atoms have a tetrahedral geometry, sp2 hybridized atoms have a trigonal planar geometry while an sp hybridized atom has a linear geometry.

The hybridization state of each atom in the compound has been shown in the answer section.

Answer:

pH value of HCL = 2.69897

Explanation:

Given:

Concentration of HCL = 0.002 M

Find:

pH value of HCL

Computation:

pH value of HCL = - log(Concentration of HCL)

pH value of HCL = - log(0.002)

pH value of HCL = 2.69897

Answer:

114.23g

Explanation:

Mass = xg

Mole = 0.334 mol

Molar mass of Sucrose

(C = 12, H = 1, O = 16)

C12H22O11

(12×12)+(1×22)+(16×11)

144 + 22 + 176

342g/mol

Mass = No of mole × Molar mass

Mass = 0.334 × 342

Mass = 114.228

Mass ≈ 114.23g

Answer and Explanation:

Photosynthesis reaction involves two reactants, carbon dioxide and water. These two reactants yield two products, namely, oxygen and glucose.

Answer:

hello can you follow me

Explanation:

used in fire extinction, blasting rubber, foaming rubber and plastic

The correct answer is option A; Mesosphere

The mesosphere is defined as the part atmosphere found above the stratosphere but below the thermosphere.

In this layer of the atmosphere, temperature decreases with height. It covers about 50 to 85 km above the earth.

Mesosphere is the only layer of the atmosphere that was correctly spelt among the options.

Learn more: https://brainly.com/question/12117482

B. cryolite substance produces sulfur dioxide when roasted in air.

Cryolite (Na3AlF6, sodium hexafluoroaluminate) is an uncommon mineral identified with the once-large deposit at Ivittuut on the west coast of Greenland, mined commercially until 1987.

Sulfur dioxide (SO2) is a gaseous air pollutant composed of sulfur and oxygen. SO2 forms when sulfur-containing fuel such as coal, oil, or diesel is burned. Sulfur dioxide also converts in the atmosphere to sulfates, a major part of fine particle pollution in the eastern U.S.

Sulfur dioxide (SO2), a colorless, bad-smelling, toxic gas, is part of a larger group of chemicals referred to as sulfur oxides (SOx). These gases, especially SO2, are emitted by the burning of fossil fuels — coal, oil, and diesel — or other materials that contain sulfur.

Although its chief uses are in the preparation of sulfuric acid, sulfur trioxide, and sulfites, sulfur dioxide also is used as a disinfectant, a refrigerant, a reducing agent, a bleach, and a food preservative, especially in dried fruits.

To learn more about Sulfur dioxide, refer

https://brainly.com/question/803589

#SPJ2

Answer:

b) carboxylic acid

Explanation:

Answer:

The most abundant chemical/gas is Nitrogen, which makes up about 78% and Oxygen at second place with approximately 21%

Answer:

Nitrogen and Oxygen because about 70% of air is nitrogen and around 20% of air is Oxygen.

Hope this helps!

it can occur 5 atoms

Explanation:

that is base on my study

Answer:

[tex]v = s \div t[/tex]

[tex]t = s \div v[/tex]

[tex]t = 300 \div 1500 = 0.2s[/tex]

Answer:

13 branches/tree

Explanation:

Step 1: Given data

Step 2: Calculate the total number of branches (b)

We will use the following expression.

b = l × b/l

b = 19565 leaves × 1 branch/35 leaves = 559 branch

Step 3: Calculate the number of branches per tree (b/t)

We will divide the total number of branches by the total number of trees.

559 branches/43 trees = 13 branches/tree

Answer:

the water molecules have more energy and are moving faster than the molecules of cold water. This makes it easier for the dye to get mixed throughout the hot water.

Explanation:

Answer:

Because particles moves more by kinetic energy and diffusion will spread with the particles

Explanation:

Answer: The mass of aluminium sample is 55.4 gram

Explanation:

[tex]Q_{absorbed}=Q_{released}[/tex]

As we know that,  

[tex]Q=m\times c\times \Delta T=m\times c\times (T_{final}-T_{initial})[/tex]

[tex]m_1\times c\times (T_{final}-T_1)=-[m_2\times c\times (T_{final}-T_2)][/tex]      

where,

[tex]m_1[/tex] = mass of aluminium = ?

[tex]m_2[/tex] = mass of water = 300.0 g

[tex]T_{final}[/tex] = final temperature = [tex]23.8^0C[/tex]

[tex]T_1[/tex] = temperature of aluminium = [tex]94.5^oC[/tex]

[tex]T_2[/tex] = temperature of water = [tex]21.0^oC[/tex]

[tex]c_1[/tex] = specific heat of aluminium = [tex]0.897J/g^0C[/tex]

[tex]c_2[/tex] = specific heat of water =  [tex]4.184J/g^0C[/tex]

Now put all the given values in equation (1), we get

[tex]-[m_1\times c_1\times (T_{final}-T_1)]=[m_2\times c_2\times (T_{final}-T_2)][/tex]

[tex]-[m_1\times 0.897\times (23.8-94.5)^0C]=[300.0g\times 4.184\times (23.8-21.0)][/tex]

[tex]m_1=55.4g[/tex]

Therefore, the mass of aluminium sample is 55.4 gram

Answer:we see 1 side because the other side is not visible

Explanation:

Answer:

750 mmHg

Explanation:

From the question given above, the following data were obtained:

Partial pressure of CO₂ (Pₐ) = 250 mmHg

Partial pressure of N₂ (P₆) = 375 mmHg

Partial pressure of He (P꜀) = 125 mmHg

Pressure of the mixture (Pₜ) =?

The pressure of the mixture of the gases can be obtained as follow:

Pₜ = Pₐ + P₆ + P꜀

Pₜ = 250 + 375 + 125

Pₜ = 750 mmHg

Therefore, the pressure of the mixture of the gases is 750 mmHg

Answer:

6.19 mol H₂O

Explanation:

First, we convert 70.25 grams of NH₃ into moles, using its molar mass:

Then we convert 4.13 moles of NH₃ into moles of H₂O, using the stoichiometric coefficients of the balanced reaction:

Answer:

true

Explanation:

the answer is A..which is true

Answer:

Ca²⁺(aq) + S²⁺(aq) + Cd²⁺(aq) + 2Cl¯(aq) —> CdS (s) + Ca²⁺(aq) + 2Cl¯(aq)

Explanation:

CaS (aq) + CdCl₂ (aq) –> CdS (s) + CaCl₂ (aq)

The complete ionic equation for the above reaction can be obtained as illustrated below:

In solution:

CaS (aq) —> Ca²⁺(aq) + S²⁺(aq)

CdCl₂ (aq) —> Cd²⁺(aq) + 2Cl¯(aq)

CaS (aq) + CdCl₂ (aq) –>

Ca²⁺(aq) + S²⁺(aq) + Cd²⁺(aq) + 2Cl¯(aq) —> CdS (s) + Ca²⁺(aq) + 2Cl¯(aq)

Answer:

23.92 g

Explanation:

Molar mass of H2SO4 = (2×1)+32+(16×4)= 2+32+48= 82g/mol

H2SO4 + 2NaOH ---> Na2SO4 + 2H2O

I mole of H2SO4 = 2 moles of NaOH

24.5/82 = 24.5/82 × 2

= 0.598 moles of NaOH will neutralize

Mass= mole× molar mass

Molar mass of NaOH= 23+16+1 = 40g/mol

Mass= 0.598 × 40 = 23.92g of NaOH

Answer:

20g

Explanation:

First of all, you have got your formula wrong. It should be [tex]H_{2}SO_{4} + 2NaOH = Na_{2}SO_{4} + 2H_{2}O[/tex].

Start by finding the Relative Formula Mass for sulfuric acid. [tex]H_{2}SO_{4}[/tex] is equal to (2x1)+32+(16x4)=98. You then calculate Mols by doing [tex]Mols=\frac{Mass}{Relative Formula Mass}[/tex]. So, [tex]\frac{24.5}{98} = 0.25[/tex], so the Mols of Sulfuric Acid is 0.25.

The Mol ratio of Sulfuric Acid to Sodium Hydroxide is 1:2, so 0.25:0.5.

Now, you have to find the Relative Formula Mass of Sodium Hydroxide, or [tex]NaOH[/tex]. 23+16+1=40. Finally, multiply 0.5 by 40, and you'll find that the maximum mass is 20g.

Answer:

1.) Eyewash station --> D

2.) Absorbent material --> G

3.) Fire extinguisher --> F

4.) Safety Shower --> E

5.) Biohazard container --> J

6.) Broken glass container --> I

7.) Safety goggles --> C

8.) Lab apron --> H

9.) asbestos gloves --> A

10.) Latex gloves --> B

Explanation:

In an equipped laboratory, alot of safety equipments are made available and kept in area that it could be easily accessed in the laboratory. Safety or protective equipments are those materials that helps protect a laboratory personnel while at work on the lab.

These equipments include:

--> Eyewash station: This is an equipment used in the laboratory during emergency to rinse chemical from the eye. Therefore option D is correct.

--> Absorbent material: They are used to contain small spills in the laboratory. Therefore option G is correct.

--> Fire extinguisher: This equipment is used to put out small fires. Therefore F is correct.

--> Safety Shower: This is used to rinse away chemical from clothes and on skin during emergency. Therefore option E is correct.

--> Biohazard container: This container is used to safely dispose bacteria culture, blood and other living tissues. Therefore option J is correct.

--> Broken glass container: This is used to dispose cracked, chipped or broken bottle in the laboratory. Therefore option I is correct.

--> Safety goggles: This helps to protect the eye from chemical and broken glasses. Therefore option C is correct.

--> Lab apron: This is worn by the laboratory personnel to help protect the skin from chemical and biohazards. Therefore option H is correct.

--> Asbestos gloves: these are heat resistant gloves used to protect the hands from heat. Therefore option A is correct.

--> Latex gloves: these are equally worn by the laboratory personnel to protect the hands from chemicals and biohazards

[tex]Answer :—✔[/tex]

Answer:

11 electrons

Explanation:

The number of electrons is the same as the number of protona in a ATOM.

They will most likely be different in a ion, simple bond or a convalent bond.

Answer:

Atomic theory is the scientific theory that matter is composed of particles called atoms. Atomic theory traces its origins to an ancient philosophical tradition known as atomism. ... An atom is now defined as the basic particle that composes a chemical element.

Explanation:

Hope i helped