Answer:
15m/sExplanation:
The equation for a traveling wave as expressed as y(x, t) = A cos(kx − [tex]\omega[/tex]t) where An is the amplitude f oscillation, [tex]\omega[/tex] is the angular velocity and x is the horizontal displacement and y is the vertical displacement.
From the formula; [tex]k =\frac{2\pi x}{\lambda} \ and \ \omega = 2 \pi f[/tex] where;
[tex]\lambda \ is\ the \ wavelength \ and\ f \ is\ the\ frequency[/tex]
Before we can get the transverse speed, we need to get the frequency and the wavelength.
frequency = 1/period
Given period = 2/15 s
Frequency = [tex]\frac{1}{(2/15)}[/tex]
frequency = 1 * 15/2
frequency f = 15/2 Hertz
Given wavelength [tex]\lambda[/tex] = 2m
Transverse speed [tex]v = f \lambda[/tex]
[tex]v = 15/2 * 2\\\\v = 30/2\\\\v = 15m/s[/tex]
Hence, the transverse speed at that point is 15m/s
A professor of physics cannot see clearly at a distance shorter than 1 m. What should be the focal length of an eyeglass lens that would assist him in reading a newspaper while holding it at a desired distance of 25 cm
Answer:
Explanation:
The mass (M) of a piece of metal is directly proportional to its volume (V), where the proportionality constant is the density (D) of the metal. (1) Write an equation that represents this direct proportion, in which D is the proportionality constant. The density of lead metal is 11.3 g/cm3. (2) What is the mass of a piece of lead metal that has a volume of 17.3 cm3
Answer:
1) M = 11.3V2) 195.49 gramsExplanation:
1) If the mass (M) of a piece of metal is directly proportional to its volume (V), where the proportionality constant is the density (D) of the metal, this is expressed mathematically as shown;
M ∝ V
M = kV
For every proportionality sign, there will always be a proportionality constant 'k'
Since the proportionality constant is the density (D) of the metal, the equation will become;
M = DV
Given the density to be 11.3 g/cm3, the equation will become;
M = 11.3V
Hence, the equation that represents this direct proportion, in which D is the proportionality constant with metal density of 11.3g/cm³ is M = 11.3V
2) If the volume of the metal is 17.3cm³, on substituting this values into the equation in (1) to get the mass of the metal, we will have;
M = 11.3V
M = 11.3 * 17.3
M = 195.49 grams
Hence, the mass of a piece of lead metal that has a volume of 17.3 cm³ is 195.49 grams.
The roller coaster car reaches point A of the loop with speed of 20 m/s, which is increasing at the rate of 5 m/s2. Determine the magnitude of the acceleration at A if pA
Answer and Explanation:
Data provided as per the question is as follows
Speed at point A = 20 m/s
Acceleration at point C = [tex]5 m/s^2[/tex]
[tex]r_A = 25 m[/tex]
The calculation of the magnitude of the acceleration at A is shown below:-
Centripetal acceleration is
[tex]a_c = \frac{v^2}{r}[/tex]
now we will put the values into the above formula
= [tex]\frac{20^2}{25}[/tex]
After solving the above equation we will get
[tex]= 16 m/s^2[/tex]
Tangential acceleration is
[tex]= \sqrt{ac^2 + at^2} \\\\ = \sqrt{16^2 + 5^2}\\\\ = 16.703 m/s^2[/tex]
Electrons are emitted from a surface when light of wavelength 500 nm is shone on the surface but electrons are not emitted for longer wavelengths of light. The work function of the surface is
Explanation:
Given: [tex]\lambda = 500\:\text{nm} = 5×10^{-7}\:\text{m}[/tex]
[tex]\nu = \dfrac{c}{\lambda} = \dfrac{3×10^8\:\text{m/s}}{5×10^{-7}\:\text{m}}[/tex]
[tex]\:\:\:\:\:= 6×10^{14}\:\text{Hz}[/tex]
The work function [tex]\phi[/tex] is then
[tex]\phi = h\nu = (6.626×10^{-34}\:\text{J-s})(6×10^{14}\:\text{Hz})[/tex]
[tex]\:\:\:\:\:\:\:= 3.98×10^{-19}\:\text{J}[/tex]
The work function of the surface is equal to 3.98 × 10⁻¹⁹J.
What are frequency and wavelength?The frequency can be explained as the number of oscillations of a wave in one second. The frequency has S.I. units of hertz.
The wavelength can be explained as the distance between the two adjacent points such as two crests or troughs on a wave.
The expression between wavelength (λ), frequency, and speed of light (c) is:
c = νλ
Given, the wavelength of the light, ν = 500 nm
The frequency of the light can determine from the above-mentioned relationship:
ν = c/λ= 3 × 10⁸/500 × 10⁻⁹ = 6 × 10¹⁴ Hz
The work function = h ν = 6 × 10¹⁴ × 6.626 × 10⁻³⁴
φ = 3.98 × 10⁻¹⁹J
Therefore, the work function of the surface is 3.98 × 10⁻¹⁹J.
Learn more about wavelength and frequency, here:
brainly.com/question/18651058
#SPJ2
A parallel plate air-filled capacitor is being charged.The circular plates have a radius of 4.00cm, and at a particular instant the conduction current in the wiresis 0.280A.
a. What is the displacement current density (jD) in theair space between the plates?
b. What is the rate at which the electric field between the platesis changing?
c. What is the induced magnetic field between the plates at adistance of 2.00 cm from the axis?
d. What is the induced magnetic field between the plates at adistance of 1.00 cm form the axis?
Answer:
Given that
capacitor being charged by a current i c has a displacementcurrent equal to i c between the plates∴
displacement current iD =i c=0.280 Aradius of the circular plate r = 4 cm=0.04 m
( A ) . displacement current density j D = iD / ( π r 2 )=0.28 / ( 3.14 * 0.04 2 )=55.73 A / m 2
( B ) . displacement current density j
D = ε( dE / dt )the rate at which the electric field between the plates is changing(
dE / dt ) = jD/ εdE/ dt ) = 55.73/ 8.85 * 10 -12=6.3*10 12 N / C - s( C ) . the induced magnetic field between theplates B = ( μ * r / 2π R 2) * i c ----( 1 )whereR= 2 cm=0.02 mr= 4 cm=0.04 mμ=permeability of free space=4π* 10 -7 H( D )substitute R = 1 cm = 0.01 m inequation ( 1 ),wegetanswer
(c) It takes you hours to to bring the turkey from to . During that time, the electrical grid transfers a constant Watts of power into the the oven. Take the turkey and the air in the oven to be your system. What was the thermal transfer of energy between the system and the surroundings
Complete Question
(c) It takes you 5 hours to to bring the turkey from 10.0°C to 75.0 °C. During that time, the electrical grid transfers a constant 2500.0 Watts of power into the the oven. Take the turkey and the air in the oven to be your system. What was the thermal transfer of energy between the system and the surroundings?
Answer:
[tex]Q=4.50 *10^7J[/tex]
Explanation:
From the question we are told that:
Time [tex]t=5hours[/tex]
Temperature rise [tex]dT= 65\textdegree[/tex]
Power [tex]P=2500.0 Watts[/tex]
Generally, the equation for Power is mathematically given by
[tex]P=\frac{Q}{t}[/tex]
Therefore
[tex]Q=2500*5*360[/tex]
[tex]Q=4.50 *10^7J[/tex]
The hot glowing surfaces of stars emit energy in the form of electromagnetic radiation. It is a good approximation to assume that the emissivity eee is equal to 1 for these surfaces.
Required:
a. Find the radius RRigel of the star Rigel, the bright blue star in the constellation Orion that radiates energy at a rate of 2.7 x 10^31 W and has a surface temperature of 11,000 K.
b. Find the radius RProcyonB of the star Procyon B, which radiates energy at a rate of 2.1 x 10^23 W and has a surface temperature of 10,000 K. Assume both stars are spherical. Use σ=5.67 x 10−8^ W/m^2*K^4 for the Stefan-Boltzmann constant.
Given that,
Energy [tex]H=2.7\times10^{31}\ W[/tex]
Surface temperature = 11000 K
Emissivity e =1
(a). We need to calculate the radius of the star
Using formula of energy
[tex]H=Ae\sigma T^4[/tex]
[tex]A=\dfrac{H}{e\sigma T^4}[/tex]
[tex]4\pi R^2=\dfrac{H}{e\sigma T^4}[/tex]
[tex]R^2=\dfrac{H}{e\sigma T^4\times4\pi}[/tex]
Put the value into the formula
[tex]R=\sqrt{\dfrac{2.7\times10^{31}}{1\times5.67\times10^{-8}\times(11000)^4\times 4\pi}}[/tex]
[tex]R=5.0\times10^{10}\ m[/tex]
(b). Given that,
Radiates energy [tex] H=2.1\times10^{23}\ W[/tex]
Temperature T = 10000 K
We need to calculate the radius of the star
Using formula of radius
[tex]R^2=\dfrac{H}{e\sigma T^4\times4\pi}[/tex]
Put the value into the formula
[tex]R=\sqrt{\dfrac{2.1\times10^{23}}{1\times5.67\times10^{-8}\times(10000)^4\times4\pi}}[/tex]
[tex]R=5.42\times10^{6}\ m[/tex]
Hence, (a). The radius of the star is [tex]5.0\times10^{10}\ m[/tex]
(b). The radius of the star is [tex]5.42\times10^{6}\ m[/tex]
The work function of a certain metal is φ = 3.55 eV. Determine the minimum frequency of light f0 for which photoelectrons are emitted from the metal. (Planck's constant is: h = 4.1357×10-15 eVs.)
Answer:
Explanation:
Let f₀ be the frequency .
energy of photons having frequency of f₀
= hf₀ where h is plank's constant
for electron to get ejected , work function should be equal to energy of photon
hf₀ = 3.55
4.1357 x 10⁻¹⁵ x f₀ = 3.55
f₀ = 8.58 x 10¹⁴ Hz .
From a static hot air balloon, a 10kg projectile is launched at a speed of 10m / s upwards. If the balloon has a mass of 90kg. What is the final velocity of the latter? Select one:
a. 0.57m / s down
b. 2.56m / s down
c. 1.11m / s down
d. 2.03m / s down
e. 3.15m / s down
Answer:
c. 1.11 m/s down
Explanation:
Momentum is conserved.
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
Assuming the balloon and projectile are originally at rest:
(90 kg) (0 m/s) + (10 kg) (0 m/s) = (90 kg) v + (10 kg) (10 m/s)
0 kg m/s = (90 kg) v + 100 kg m/s
v = -1.11 m/s
A cook preparing a meal for a group of people is an example of
O kinetic energy because he has the ability to make a meal
O potential energy because he has the ability to make a meal
O kinetic energy because he is making the meal
o potential energy because he is making the meal
A convex refracting surface has a radius of 12 cm. Light is incident in air (n = 1) and refracted into a medium with an index of refraction of 1.5. Light incident parallel to the central axis is focused at a point _____________
Answer:
36cm from the surfaceExplanation:
Equation of refraction of a lens is expression according to the formula given below;
[tex]\dfrac{n_2}{v} = \dfrac{n_1}{u}= \dfrac{n_2-n_1}{R}[/tex]
R is the radius of curvature of the convex refracting surface = 12cm
v is the image distance from the refracting surface
u is the object distance from the refracting surface
n₁ and n₂ are the refractive indices of air and the medium respectively
Given parameters
R = 12 cm
u = [tex]\infty[/tex] (since light incident is parallel to the axis)
n₁ = 1
n₂ = 1.5
Required
focus point of the light that is incident and parallel to the central axis (v)
Substituting this values into the given formula we will have;
[tex]\dfrac{1.5}{v} - \dfrac{1}{\infty}= \dfrac{1.5-1}{12}\\\\\dfrac{1.5}{v} -0= \dfrac{0.5}{12}\\\\\dfrac{1.5}{v}= \dfrac{0.5}{12}\\\\[/tex]
Cross multiply
[tex]1.5*12 = 0.5*v\\ \\18 = 0.5v\\\\v = \frac{18}{0.5}\\ \\v = 36cm[/tex]
Hence Light incident parallel to the central axis is focused at a point 36cm from the surface
Water pressurized to 3.5 x 105 Pa is flowing at 5.0 m/s in a horizontal pipe which contracts to 1/3 its former area. What are the pressure and velocity of the water after the contraction
Answer:
the pressure after contraction is 2×10^5 Pa
the speed after contraction is 15m/s
Explanation:
We were given Pressure P to be 3.5 x 10^5 that is Flowing with speed of 5.0 m/s,
For us to calculate pressure we need to calculate the area first as;
Let initial Area = A₁
And Final area A₂
We were told that in a horizontal pipe it contracts to 1/3 its former area. Which means
A₂= A₁/3.................
V₁ is the speed
the pressure and speed of the water after the contraction can be calculated using equation of continuity below
A₂V₂ = A₁V₁
But
If we substitute given value in the expresion we have
V₂ = (3A *5)/A
V₂ = 15m/s
Therefore, the speed after contraction is 15m/s
Now we can calculate the pressure using
Bernoulli's equation
p₁ + ½ρv₁² + ρgh₁ = p₂ + ½ρv₂² + ρgh₂
But we know that the pipe is horizontal, then "h" terms cancel out then
p₁ + ½ρv₁² = p₂ + ½ρv₂²
Making P₂ subject of formula we have
p₂ = 0.5ρ( V ₁² - v₂² ) + P₁
P₂=. 0.5 × 1000 (5² -15² ) + 3*10^5
=2×10^5 Pa
Therefore, the pressure after contraction is 2×10^5 Pa
(a) the final speed of the water after contraction is 15 m/s.
(b) The final pressure of the water after contraction is 2.5 x 10⁵ Pa.
The given parameters;
initial pressure, P₁ = 3.5 x 10⁵ Painitial speed, v₁ = 5 m/sdensity of water, ρ = 1000 kg/m³Let the initial area of the pipe = A₁
Apply the continuity equation to determine the final speed of the water after contraction as follows;
[tex]A_1 V_1 = A_2 V_2\\\\V_2 = \frac{A_1V_1}{A_2} \\\\V_2 = \frac{A_1 \times 5}{\frac{1}{3} A_1 } \\\\V_2 = 15 \ m/s[/tex]
The final pressure of the water after contraction is determined by applying Bernoulli's equation for horizontal pipe;
[tex]P_1 + \frac{1}{2} \rho V_1^2= P_2 + \frac{1}{2} \rho V_2^2\\\\P_2 = \frac{1}{2} \rho (V_1^2 - V_2^2) + P_1\\\\P_2 = \frac{1}{2} \times 1000(5^2 - 15^2) + 3.5 \times 10^5\\\\P_2 = 2.5 \times 10^5 \ Pa[/tex]
Learn more here:https://brainly.com/question/19566865
Which is a dopant for a p-type semiconductor? arsenic indium phosphorus antimony
Answer:
As opposed to n-type semiconductors, p-type semiconductors have a larger hole concentration than electron concentration.
Explanation:
In p-type semiconductors, holes are the majority carriers and electrons are the minority carriers. A common p-type dopant for silicon is boron or gallium. hope this you :)
Answer:
IndiumHere are notes I took on semiconductor conductivity :
________________________________________________________
-A p-type semiconductor is made of a material in which electrical conduction is due to the movement of a positive charge.
-Examples of p-type dopants - boron, aluminum, gallium, indium, and thallium
Explanation:
In this case, indium only correct option being a dopant of a P-type semiconductor. Other options are N-type dopants.
Hopefully its correct !! <3
A lamp has the shape of a parabola when viewed from the side. The lamp is centimeters wide and centimeters deep. How far is the light source from the bottom of the lamp if the light source is placed at the focus
The question is not complete so i have attached it.
Answer:
The light source is 2 cm from the bottom of the lamp
Explanation:
From the attached image, we can see that the parabola opens up with its vertex at the origin.
Now, the standard form of equation for a parabola is:
x² = 4ay
Looking at the parabola in the attachment, the top right edge of the lamp has a coordinate of (12,18)
Thus, we have;
12² = 4a(18)
144 = 72a
a = 144/72
a = 2
Looking at the parabola again, the line of symmetry is at x = 0
Thus, axis of symmetry is at x = 0.
Thus, focus is at (0, 2)
So, if the light source is placed at the focus, the distance of the light source from the bottom of the lamp is 2 cm
The distance of the light source from the bottom of the lamp is 2 cm.
The given parameters;
the top right edge of the lamp has a coordinate of (12,18)Apply standard parabola equation to determine the distance of the light source from the bottom of the lamp;
[tex]x^2 = 4ay\\\\12^2 = 4a(18)\\\\144 = 72 a\\\\a = \frac{144}{72} \\\\a = 2 \ cm[/tex]
Thus, the distance of the light source from the bottom of the lamp is 2 cm.
"Your question is not complete, it seems to be missing the following information";
the top right edge of the lamp has a coordinate of (12,18)
Learn more here:https://brainly.com/question/14459938
A lens is made with a focal length of -40 cm using a material with index of refraction 1.50. A second lens is made with the SAME GEOMETRY as the first lens, but using a material having refractive index of 2.00. What is the focal length of the second lens
Answer:
f = - 20 cm
Explanation:
This exercise asks us for the focal length, which for a lens in air is
1 / f = (n₂-n₁) (1 / R₁ - 1 / R₂)
where n₂ is the refractive index of the material, n₁ is the refractive index of the medium surrounding the lens, R₁ and R₂ are the radii of the two surfaces.
In this exercise the medium that surrounds the lens is air n₁ = 1 and the lens material has an index of refraction n₂ = n = 1.50, let's substitute in the expression
- 1/40 = (n-1) (1 / R₁ -1 / R₂)
(1 / R₁ - 1 / R₂) = - 1/40 (n-1)
let's calculate
(1 / R₁ -1 / R₂) = - 1/40 (1.50 -1)
(1 / R₁ -1 / R₂) = -1/20
Now we change the construction material for one with refractive index
n = 2, keeping the radii,
1 / f = (n-1) (1 / R₁-1 / R₂)
1 / f = (n-1) (-1/20)
let's calculate
1 / f = (2.00-1) (-1/20)
1 / f = -1/20
f = - 20 cm
If we compare the force of gravity to strong nuclear force, we could conclude that
O gravity is the weaker force; it is related to mass
O gravity is the stronger force; it is related to distance
strong nuclear is the stronger force; it is related to mass
O strong nuclear is the weaker force; it is related to distance
Answer:
strong nuclear is the stronger force; it is related to mass
Explanation:
If we compare the force of gravity to strong nuclear force, we could conclude that strong nuclear is the stronger force; it is related to mass, therefore the correct answer is option C
What are nuclear forces?The nuclear force is the interaction between the subatomic particles that make up a nucleus. There are two types of nuclear forces: the strong nuclear force and the weak nuclear force. Depending on the separation between the proton neutron and proton pairs, these nuclear forces can be both attracting and positive.
Both types of nuclear forces come under the four fundamental forces of nature. There are mainly four fundamental forces of nature electromagnetic force, gravitational force, strong nuclear force, and weak nuclear force.
Thus, Option C is the appropriate response since, when compared to the force of gravity, the strong nuclear force is the greater force because it is tied to mass.
Learn more about nuclear forces here
brainly.com/question/4346079
#SPJ2
an 1800 kg car travelling east at 30 m/s slows down to 10 m/s what is the work done by brakes
This was a question on my test do y’all know how to do it cuz I couldn’t figure it out
Answer:
Explanation:
The work done by brake friction changes the kinetic energy,
ASSUMING the road is level and other friction is ignored.
W = KEf - KEi = ½mvf² - ½mvi² = ½m(vi² - vf²)
W = ½(1800)(30² + 10²) = 900(900 - 100) = 720000 J = 720 KJ
Which notation is better to use? (Choose between 4,000,000,000,000,000 m and 4.0 × 1015 m)
Answer:
4 x 10¹⁵
Explanation:
Electromagnetic radiation is more common than you think. Radio and TV stations emit radio waves when they broadcast their programs; microwaves cook your food in a microwave oven; dentists use X rays to check your teeth. Even though they have different names and different applications, these types of radiation are really all the same thing: electromagnetic (EM) waves, that is, energy that travels in the form of oscillating electric and magnetic fields. Which of the following statements correctly describe the various applications listed above?
a) All these technologies use radio waves, including low-frequency microwaves.
b) All these technologies use radio waves, including high-frequency microwaves.
c) All these technologies use a combination of infrared waves and high-frequency microwaves.
d) Microwave ovens emit in the same frequency band as some wireless Internet devices.
e) The radiation emitted by wireless Internet devices has the shortest wavelength of all the technologies listed above.
f) All these technologies emit waves with a wavelength in the range 0.10 to 10.0 m.
g) All the technologies emit waves with a wavelength in the range 0.01 to 10.0 km.
Answer:
d) Microwave ovens emit in the same frequency band as some wireless Internet devices.
Explanation:
Microwave are radio waves of short wavelength, from about 10 centimetres to one millimetre, in the Super High Frequency and the Extremely High Frequency bands. Microwaves can penetrate into materials and deposit their energy below the surface which is why is is used in microwave heating found in microwave oven. Transmission of data sometimes involves the use of microwaves to send and receive information over a long distance. Microwaves are the mainly used in radar, used for satellite communication, and wireless networking technologies such as Wi-Fi.
A 1.5 V battery is connected to a 1000 ohm resistor and a 500 ohm resistor in series. The voltage across the 1000 ohm resistor is _____ V.
Answer:
1 volt and 0.5 voltExplanation:
Given data
voltage supplied Vs= 1.5 volts
resistance R1= 1000 ohms
resistance R2= 500 ohms
The total resistance is
Rt= 1000+ 500
Rt= 1500 ohms
The current I is given as
[tex]I= \frac{Vs}{Rt} \\\\ I= \frac{1.5}{1500} = 0.001mA[/tex]
Voltage across R1
[tex]VR1= Vs(\frac{R1}{R1+R2} )=1.5(\frac{1000}{1000+500} )= 1.5(\frac{1000}{1500} )\\ \\\ VR1= 1v[/tex]
Voltage across R2
[tex]VR2= Vs(\frac{R2}{R1+R2} )=1.5(\frac{500}{1000+500} )= 1.5(\frac{500}{1500} ) \\\ VR2=0.5v[/tex]
In series connection the current is the same for all components while the voltage divides across all components,the voltages consumed by each individual resistance is equal to the source voltage.
Two resistors connected in series have an equivalent resistance of 690 Ohms. When they are connected in parallel, their equivalent resistance is 118 Ohms. Find the resistance of each resistor.
Explanation:
Let [tex]R_1[/tex] and [tex]R_2[/tex] be the the resistances of the resistors. We are given that
[tex]R_1 + R_2 = 690\:Ω\:\:\:\:\:\:\:(1)[/tex]
and
[tex]\dfrac{1}{R_1} + \dfrac{1}{R_2} = \dfrac{1}{118\:Ω}\:\:\:\:\:(2)[/tex]
From Eqn(1), we can write
[tex]R_2 = 690\:Ω - R_1[/tex]
and then plug this into Eqn(2):
[tex]\dfrac{1}{R_1} + \dfrac{1}{690\:Ω - R_1} = \dfrac{1}{118\:Ω}[/tex]
or
[tex]\dfrac{690\:Ω}{(690\:Ω)R_1 - R_1^2}= \dfrac{1}{118\:Ω}[/tex]
[tex]\Rightarrow R_1^2 - (690\:Ω)R_1 + (690\:Ω)(118\:Ω)= 0[/tex]
or
[tex]R_1^2 - 690R_1 + 81420 = 0[/tex]
Using the quadratic formula, we find that the above equation has two roots:
[tex]R_1 = 151.1\:Ω,\:\:538.9\:Ω[/tex]
This means that if you choose one root value for [tex]R_1[/tex], the other root will be the value for [tex]R_2[/tex].
Two 1.0 nF capacitors are connected in series to a 1.5 V battery. Calculate the total energy stored by the capacitors.
Answer:
1.125×10⁻⁹ J
Explanation:
Applying,
E = 1/2CV²................... Equation 1
Where E = Energy stored in the capacitor, C = capacitance of the capacitor, V = Voltage of the battery.
Given; C = 1.0 nF, = 1.0×10⁻⁹ F, V = 1.5 V
Substitute into equation 1
E = 1/2(1.0×10⁻⁹×1.5²)
E = 1.125×10⁻⁹ J
Hence the energy stored by the capacitor is 1.125×10⁻⁹ J
Suppose a 500 mb chart valid today at 12 Z indicates a large trough over the eastern US and a large ridge over the western US. An aircraft, flying in the vicinity of 18,000 ft altitude from west to east over the US at 12 Z today, will _____ altitude if the altimeter is not corrected. Group of answer choices
Answer:
An aircraft, flying in the vicinity of 18,000 ft altitude from west to east over the US at 12 Z today, will __LOSE___ altitude if the altimeter is not corrected
Fast please!!. Serious answers only.
Considering that Susan is 38 years old, what is the probability that she lives to the age of 85?
Answer:
The probability that Susan turns 85 years old is 45,436/97,825= 0.4644.
Explanation:
Edmentum
Answer:
45,436/97,825= 0.4644.
Please help! Can give brainliest too.
Explanation:
[tex]v = \sqrt{2ax}[/tex]
Take the square of both sides:
[tex]v^2 = \left(\sqrt{2ax}\right)^2 = 2ax[/tex]
Divide both sides by 2a and you will get
[tex]x = \dfrac{v^2}{2a}[/tex]
Coherent light with wavelength 601 nm passes through two very narrow slits, and the interference pattern is observed on a screen a distance of 3.00 m from the slits. The first-order bright fringe is a distance of 4.84 mm from the center of the central bright fringe. For what wavelength of light will thefirst-order dark fringe be observed at this same point on the screen?
Answer:
The wavelength is [tex]\lambda = 1805 nm[/tex]
Explanation:
From the question we are told that
The wavelength of the light is [tex]\lambda = 601 \ nm = 601 *10^{-9} \ m[/tex]
The distance of the screen is D = 3.0 m
The fringe width is [tex]y = 4.84 \ mm = 4.84 *10^{-3} \ m[/tex]
Generally the fringe width for a bright fringe is mathematically represented as
[tex]y = \frac{ \lambda * D }{d }[/tex]
=> [tex]d = \frac{ \lambda * D }{ y }[/tex]
=> [tex]d = \frac{ 601 *10^{-9} * 3}{ 4.84 *10^{-3 }}[/tex]
=> [tex]d = 0.000373 \ m[/tex]
Generally the fringe width for a dark fringe is mathematically represented as
[tex]y_d = [m + \frac{1}{2} ] * \frac{\lambda D }{d }[/tex]
Here m = 0 for first order dark fringe
So
[tex]y_d = [0 + \frac{1}{2} ] * \frac{\lambda D }{d }[/tex]
looking at which we see that [tex]y_d = y[/tex]
[tex]4.84 *10^{-3} = [0 + \frac{1}{2} ] * \frac{\lambda * 3 }{ 0.000373 }[/tex]
=> [tex]\lambda = 1805 *10^{-9} \ m[/tex]
=> [tex]\lambda = 1805 nm[/tex]
Just wondering if I did this right
Yeah
All they are all correct
6)the speed of light is approximately 186,000 mi/sec. It takes light from a particular star approximately 9 yrs to reach Earth. How many miles away is the star from Earth? Express the answer in scientific notation. Use 365 days in 1 year. The star is nothing miles away from Earth.
Answer:
5.2791264*10¹³
Explanation:
Convert the 9 years to seconds and then multiple it by 186000
The star is 4.62 x 10¹⁶ miles away from Earth.
The speed of light is 186,000 miles per second. It takes light from a particular star approximately 9 years to reach Earth. There are 365 days in 1 year, so it takes 9 x 365 = 3285 days for light from the star to reach Earth.
The distance between the star and Earth is 3285 x 186,000 = 608,810,000 miles. In scientific notation, this is 4.62 x 10¹⁶ miles.
Here is the calculation:
distance = speed * time
distance = 186,000 miles/second * 3285 days * 24 hours/day * 60 minutes/hour * 60 seconds/minute
distance = 608,810,000 miles
distance = 4.62 x 10¹⁶ miles
To know more about the Light, here
https://brainly.com/question/20296439
#SPJ2
A piano string having a mass per unit length equal to 4.80 ✕ 10−3 kg/m is under a tension of 1,300 N. Find the speed with which a wave travels on this string.
Answer:
Velocity of wave (V) = 5.2 × 10² m/s
Explanation:
Given:
Per unit length mass (U) = 4.80 × 10⁻³ kg/m
Tension (T)= 1,300 N
Find:
Velocity of wave (V)
Computation:
Velocity of wave (V) = √T / U
Velocity of wave (V) = √1300 / 4.80 × 10⁻³
Velocity of wave (V) = √ 270.84 × 10³
Velocity of wave (V) = 5.2 × 10² m/s
How are electricity and magnets connected
Answer: The properties of magnets are used to make electricity. Moving magnetic fields pull and push electrons. Moving a magnet around a coil of wire, or moving a coil of wire around a magnet, pushes the electrons in the wire and creates an electrical current.