Suppose you light a Bunsen burner and notice that the flame is very yellow and too short. To get a blue flame, you should ________further. To increase the size of the flame, you should _____________the _____________further.

Answers

Answer 1

Answer:

In the given case, to get a blue flame, one should open the air inlet further. To increase the size of the flame one should open the gas regulator further. When one opens the air inlet, more amount of oxygen goes within, and thus, one can get a more intense form of blue flame.

When one opens the gas regulator more concentration of gas goes and the larger the size of flame one gets.

Answer 2

To regulate a bunsen burner follow this procedure

To get a blue flame, you should rotate the wheel  of the burner anticlockwise further to reduce the level of oxygen flow.

To increase the size of the flame, you should rotate the wheel clockwise further

The bunsen burner is an apparatus in the laboratory used to carry out experiment when heating of substance is required, hence it is used to add heat to substances, it has a wheel used to regulate the flow of air which is required for combustion, it has a hose which is used to tap gas to the burner

Learn more:

https://brainly.com/question/21641416

Suppose You Light A Bunsen Burner And Notice That The Flame Is Very Yellow And Too Short. To Get A Blue

Related Questions

How many seconds are in 100 years(factor label conversion)

Answers

Answer:

0.0166

Explanation:

This conversion of 100 seconds to minutes has been calculated by multiplying 100 seconds by 0.0166 and the result is 1.6666 minutes.

I hope this helps,

even a little bit

0. 0166 is how many seconds are in the year

K2CrO4 + Ba(NO3)2 = BaCrO4 +2 KNO3
If 5.0 grams of K2CrO4 are put into a reaction, how many grams of BaCrO4 will be produced

Answers

5. i’m guessing sorry

determine moles of 1.5g of sodium carbonate.

Answers

Answer:

0.014mol

Explanation:

Given parameters:

Mass of Na₂CO₃  = 1.5g

Unknown:

Number of moles  = ?

Solution:

Number of moles of a compound is mathematically expressed as;

  Number of moles  = [tex]\frac{mass}{molar mass}[/tex]  

 Molar mass of  Na₂CO₃  = 2(23) + 12 + 3(16) = 106g/mol

 Number of moles = [tex]\frac{1.5}{106}[/tex]   = 0.014mol

28. Element X is powerful enough to reduce sodium ions to sodium metal. Barium is a strong enough reducing agent to reduce X +to X. What is the identity of element X? _____________

Answers

Answer:

hope it's correct.

Explanation:

element is nickel.

What volume will be occupied by 33.0 grams of CO2 at 500 torr and 27 °C?

Answers

Answer:

V = 27.98 L

Explanation:

Given data:

Mass of CO₂ = 33.0 g

Pressure = 500 torr

Temperature = 27°C

Volume occupied = ?

Solution:

Number of moles of CO₂:

Number of moles = mass/molar mass

Number of moles = 33.0 g/ 44 g/mol

Number of moles = 0.75 mol

Volume of CO₂:

PV = nRT

R = general gas constant = 0.0821 atm.L/ mol.K  

Now we will convert the temperature.

27+273 = 300 K

Pressure = 500 /760 = 0.66 atm

By putting values,

0.66 atm×V = 0.75 mol × 0.0821 atm.L/ mol.K  × 300 K

V = 18.47 atm.L/0.66 atm

V = 27.98 L

The volume that will be occupied by 33.0 grams of CO2 at 500 torr and 27 °C is 28.11L.

IDEAL GAS LAW:

The volume of an ideal gas can be calculated using the ideal gas law equation as follows:

PV = nRT

Where;

P = pressure (atm)V = volume (L)n = number of moles (mol)R = gas law constant (0.0821 Latm/molK)T = temperature (K)

According to this question;

P = 500torr = 0.657atmV = ?n = 33/44 = 0.75molT = 27°C = 27 + 273 = 300K

0.657 × V = 0.75 × 0.0821 × 300

0.657V = 18.4725

V = 18.4725 ÷ 0.657

V = 28.11L

Therefore, the volume that will be occupied by 33.0 grams of CO2 at 500 torr and 27 °C is 28.11L.

Learn more about ideal gas law at: https://brainly.com/question/4147359

Which is the best example and explanation that a physical change has occurred?
fireworks exploding, because energy is released as light and heat
gasoline burning, because it forms water vapor and carbon dioxide
O crushing an ice cube, because the chemical structure of the ice cube is changed
dicing potatoes, because the molecules are separated but remain the same substance

Answers

dicing potatoes, because the molecules are separated but remain the same substance

Answer:

For the people wondering, yes, dicing potatoes is the correct answer. Because a new substance has not formed.

List any three quantum numbers that describe an electron in an atom and state the relationship between any of the two

Answers

Explanation:

To completely describe an electron in an atom, four quantum numbers are needed: energy (n), angular momentum (ℓ), magnetic moment (mℓ), and spin (ms).

Please follow me and make me Brainless


Which of these is NOT evidence that a chemical change has taken place?

temperature rising when 2 substances are mixed

gas production

color change

melting

Answers

melting, that’s the sign on a physical change

A. 1

B. 2

C. 3

D. 4

_______________________________________________________

Answers

I think it’s B. I’m not 100% sure but I believe it is B! Srry if this is late btw.

How many milliliters of 6.2 M M HCl H C l solution are needed to obtain 0.18 mol m o l of HCl H C l ?

Answers

Answer:

29 mL HCl

General Formulas and Concepts:

Chem

Molarity = moles of solute / liters of solution

Explanation:

Step 1: Define

6.2 M HCl

0.18 mol HCl

x L mol HCl

Step 2: Define conversions

1 L = 1000 mL

Step 3: Find L

6.2 M HCl = 0.18 mol HCl / x L HCl

(x L HCl)(6.2 M HCl) = 0.18 mol HCl

x L HCl = 0.18 mol HCl / 6.2 M HCl

x = 0.029032 L HCl

Step 4: Convert

[tex]0.029032 \ L \ HCl(\frac{1000 \ mL \ HCl}{1 \ L \ HCl} )[/tex] = 29.0323 mL HCl

Step 5: Check

We are given 2 sig figs. Follow sig fig rules.

29.0323 mL HCl ≈ 29 mL HCl

Answer:

29 mL HCl

Explanation:

A 45.0 mL solution of 0.0450 M hydroxylamine is extracted with 125 mL of solvent. The distribution constant for the reaction is 5.00 and the pKa of the protonated form of hydroxylamine is 5.960. Calculate the concentration of hydroxylamine remaining in the aqueous phase at pH=4.50 and pH=6.50 .

Answers

Answer:

pH = 4.5, concentration = 0.045 M.

pH = 6.5, concentration = 0.175 M.

Explanation:

The ka for the can be calculated by using the formula below;

Ka = 10^-pka = 10^-5.960 = 1.1 × 10^-6

The concentration of hydrogen ion at pH = 4.50 can be calculated as given below;

{H^+ } = 10^-4.50 = 3.2 × 10^-5 M.

(NB=> 10 in this regards means the inverse of log).

The next step is to determine the distribution coefficient which can be calculated by using the formula below;

distribution coefficient = (partition coefficient) × ka / ka + ( concentration of Hydrogen ion,H^+).

distribution coefficient =( 5 × 1.1 × 10^-6 ) / 1.1 × 10^-6 + 3.2 × 10^-5 M. = 5.5 × 10^-6/ 3.2 = 0.00000171875

The fraction remaining from the compound = 45.0 mL / 45.0 mL + (0.00000171875 × 125).

= 0.999995.

Thus, the concentration at pH = 4.5 = 0.999995 × 0.0450 M = 0.045 M

(B). pH=6.50, thus the concentration of Hydrogen ion = 10^-6.5 = 3.2 × 10^-7 M.

distribution coefficient = (partition coefficient) × ka / ka + ( concentration of Hydrogen ion,H^+).

distribution coefficient = (5 × 1.1 × 10^-6)/ 1.1 × 10^-6 + 3.2 × 10^-7 M).

distribution coefficient = 5.5 × 10^-6/ 1.42 × 10^-6 = 3.9.

Therefore, the concentration = 3.9 × 0.0450 M = 0.175 M.

4. One mole of oxygen contains 6.02 x 102 molecules. How many oxygen molecules are in

5.55 moles of oxygen gas?|

Answers

Answer:

3.34x10²⁴ molecules of oxygen

Explanation:

1 Mole of particles of any kind of gases or particles are always 6.022x10²³.

1 mole of electrons are 6.022x10²³ electrons

1 mole of any gas are 6.022x10²³ molecules

1 mole of oxygen are 6.022x10²³ molecules. Thus, 5.55 moles are:

3.34x10²⁴ molecules of oxygen

5. To keep your lunch cold at the beach, would you want a material
that minimizes heat transfer or maximizes heat transfer? Explain (keep it short please)

Answers

Answer:

Minimizes heat transfer

Explanation:

To keep my lunch from getting cold at the beach, a material the minimizes heat transfer will be the most desirable.

Such material should be modified to prevent had transfer by convection, conduction and radiation. This kind of material is desirable because heat generally flows from a place of high amount to that of low amount. Since the food will mostly have a temperature higher than the ambient one, it is expected that heat will flow away from the food to the environment. This will make the food cold. If such heat transfer is prevented, then, the food will remain hot.

What forces cause mechanical weathering? Choose more than one
answer.

Answers

Answer:

mineral crystal growth

acid rain

carbonic acid

Answer:

Mineral crystal growth, Acid rain, Carbonic acid

Calculate the final temperature (once the ice has melted) of a mixture made up initially of 70.0 mL liquid water at 28 oC and 5.0 g ice at 0.0 oC.

Answers

Answer:

21.52° C

Explanation:

From the given information:

mass of the liquid water = 70.0 mL

Initial temperature = 20°C

mass of the ice = 5.0 g

temperature of ice = 0.0°C

Using the calorimetric function:

heat lost by water = heat gained by ice.

mass of water × specific heat of water (s) × ΔT = mass of ice × specific heat of ice (s) × ΔT + n (ΔH_fusion}

⇒ 70 × 4.184 × (28 -x) = 5 × 2.108(x - 0) + [tex](\dfrac{5}{18})[/tex] × 6.01 × 10³

By solving the above equation,

x = 21.52° C

The final temperature of the mixture of water and ice is 21.5 ⁰C.

The given parameters;

initial volume of the liquid = 70 mL initial temperature of the water, = 28⁰Cmass of the ice, = 5.0 gtemperature of the ice, = 0⁰ Cspecific heat capacity of ice = 2.09 J/g ⁰Cheat of fusion of ice = 333.55 J/gspecific heat capacity of water = 4.184 J/g⁰ Cdensity of water = 1 g/ml

Let the final temperature of the mixture = t

mass of the liquid water = 1 g/ml  x 70 ml = 70 g

Apply the principle of conservation of energy to determine the final temperature of the mixture;

heat lost by water = heat gained by ice

[tex]70 \times 4.184(28 - t) = 5\times 2.09(t - 0) \ + \ 5 \times 333.55\\\\8200.64 - 292.88t = 10.45 t + 1667.75\\\\303.33t = 6532.89\\\\t = \frac{6532.89}{303.33}\\\\t = 21.5 \ ^0C[/tex]

Thus, the final temperature of the mixture of water and ice is 21.5 ⁰C.

Learn more here:https://brainly.com/question/12200172

Write a balanced half-reaction for the oxidation of gaseous nitric oxide (NO) to aqueous nitrous acid (HNO2) in acidic aqueous solution.

Answers

Answer:

NO + H₂O → HNO₂ + 1 e- + 1 H⁺

Step-by-step explanation:

NO ⇒ oxidation number of N = +2

HNO₂ ⇒ oxidation number of N= +3

Therefore, NO has to lose 1 electron to be oxidized to HNO₂. We write the half-reaction with 1 electron (1 e-) in the products side.

NO → HNO₂ + 1 e-

Now, we have 0 electrical charges in the reactants side, and a total of -1 electrical charge in the products side. As the reaction is in acidic aqueous solution, we have to add H⁺ ions to balance the charges. We perform the balance by adding 1 H⁺ (positive charge) to neutralize the negative charge in the side of the products:

NO → HNO₂ + 1 e- + 1 H⁺

Now, we perform the mass balance. We have:

N: 1 atom in both sides

O: 1 atom in reactants side and 2 atoms in products side

H: 0 atoms in reactants side, 2 atoms in products side.

Thus, we have to add 1 H₂O molecule to the reactants side to equal the masses:

NO + H₂O → HNO₂ + 1 e- + 1 H⁺

Finally, the oxidation half-reaction is:

NO + H₂O → HNO₂ + 1 e- + 1 H⁺

A mixture of 10.0 g of Ne and 10.0 g Ar have a total pressure of 1.60 atm. What is the partial pressure of Ar

Answers

The partial pressure of Ne is 1.06 atm. The answer is a. 1.1 atm

Answer:

0.53 atm

Explanation:

First we have to obtain the number of moles of each gas.

Number of moles of Ne = 10g/20g/mol = 0.5 moles

Number of moles of Ar = 10 g/40 g/mol = 0.25 moles

Total number of moles = 0.5 moles + 0.25 moles = 0.75 moles

Partial pressure of Ar = number of moles of Ar/Total number of moles * total pressure

Partial pressure of Ar = 0.25 moles/ 0.75 moles * 1.60 atm

Partial pressure of Ar = 0.53 atm

Suppose there is a gaseous mixture of nitrogen and oxygen. If the total pressure of the mixture is 480 mmHg, and the partial pressure of nitrogen is 290 mmHg, calculate the partial pressure of oxygen in the mixture using Dalton's law.

Answers

Answer:

Partial pressure of oxygen = 190 mmHg

Explanation:

From the question;

Mixture contains only nitrogen and oxygen

Total pressure of the mixture = 480 mmHg

Partial pressure of nitrogen = 290 mmHg

Dalton's law states that the pressure of a system is as a result of the sum of the partial pressures of the individual components of the mixture. This means that in this mixture;

Pressure of mixture = Partial Pressure of Nitrogen + Partial Pressure of Oxygen

480 = 290 + Partial pressure of oxygen

Partial pressure of oxygen = 480 - 290

Partial pressure of oxygen = 190 mmHg

The nucleus of an atom is made up of which of the following combinations of particles?

Answers

Answer:  Atoms of different elements are found to have different number    of protons, neutrons, and electrons. To distinguish one atom from another or to classify the various atoms, a number which indicates the number of protons in the nucleus of a given atom, is assigned to the atoms of each identified element. This number is known as the atomic number of the element. The atomic numbers for some of the elements which are associated with the study of semiconductors are given in the following table.

Explanation:

Element Symbol Atomic Number

Silicon Si 14

Germanium Ge 32

Arsenic As 33

Antimony Sb 51

Indium In 49

Gallium Ga 31

Boron B 5

Answer:

[tex]\boxed {\boxed {\sf Protons \ and \ neutrons}}[/tex]

Explanation:

The atom is made up of two main parts: the nucleus and the electron cloud.

The nucleus is the center and has two subatomic particles: the protons (positive charge) and the neutrons (no/neutral charge). The nucleus as a whole has a positive charge, since the neutrons don't provide a charge.

The electron cloud surrounds the nucleus and houses the negatively charged electrons in a "cloud" of energy levels.

So, the nucleus of the atom is made up of protons and neutrons.

9. What type of bond is pictured in the image below?
Alt
Alt
Alt
--
AI+
Alt
Alt
Alth
AN
1
a. covalent bond
b. ionic bond
c. metallic bond
d. electron bond

Answers

Answer:

metallic bond

because this diagram is electron gas theory which shows metallic bond

A hutch weighs 150 lbs and it’s base has a length and width of 15 in and 34 in, respectively. What is the pressure exerted by the hutch on the floor?

Answers

Answer:0.29

Explanation:

To determine the pressure of the hutch on the floor, we must first calculate the area of the base of the hutch.

A=lw=(15in.)(34in.)=510in.2

We can now use the formula to calculate pressure.

P=FAP=150lbs510in.2P≈0.294lbin.2

Rounding to two significant figures, the pressure exerted by the hutch on the floor is 0.29lbin.2.

The compound F20 has two lone pairs on the central oxygen atom. What's the structure of an F2O molecule? Is this compound polar or non-polar?
A. Trigonal planar, polar
B. Bent or angular non-polar
C. Bent or angular polar
D. Trigonal planar non-polar​

Answers

Answer:

Bent or Angular, Polar

Explanation:

I just took the test!

Answer:

C. Bent or angular polar

Explanation:

Consider the following reaction:2 HgCl2(aq) + C2O42-(aq) 2 Cl-(aq) + 2 CO2(g) + Hg2Cl2(s)(a) The rate law for this reaction is first order in HgCl2(aq) and second order in C2O42-(aq). What is the rate law for this reaction?Rate = k [HgCl2(aq)] [C2O42-(aq)]Rate = k [HgCl2(aq)]2 [C2O42-(aq)]Rate = k [HgCl2(aq)] [C2O42-(aq)]2Rate = k [HgCl2(aq)]2 [C2O42-(aq)]2Rate = k [HgCl2(aq)] [C2O42-(aq)]3Rate = k [HgCl2(aq)]4 [C2O42-(aq)](b) If the rate constant for this reaction at a certain temperature is 0.0169, what is the reaction rate when [HgCl2(aq)] = 0.158 M and [C2O42-(aq)] = 0.202 M?Rate = M/s.(c) What is the reaction rate when the concentration of HgCl2(aq) is doubled, to 0.316 M while the concentration of C2O42-(aq) is 0.202 M?Rate = M/s

Answers

Answer:

b

Explanation:

the position-time graph shows the motion of four people. label the lines on graph need on the motion description in this table.​

Answers

Line 1: straight horizontal line
Line 2: straight line at a slope
Line 3: exponential growth curve
Line 4: the topmost curve (the one that initially increases but then starts levels out)

Answer:

4,2,3,1

Explanation:

12oz of water initially at 75oF is mixed with 20oz of water intiially at 140oF. What is the final temperature?

Answers

Answer:

[tex]115.625^{\circ}\text{F}[/tex]

Explanation:

[tex]m_1[/tex] = First mass of water = 12 oz

[tex]m_2[/tex] = Second mass of water = 20 oz

[tex]\Delta T_1[/tex] = Temperature difference of the solution with respect to the first mass of water = [tex](T-75)^{\circ}\text{F}[/tex]

[tex]\Delta T_2[/tex] = Temperature difference of the solution with respect to the second mass of water = [tex](T-75)^{\circ}\text{F}[/tex]

c = Specific heat of water

As heat gain and loss in the system is equal we have

[tex]m_1c\Delta T_1=m_2c\Delta T_2\\\Rightarrow m_1\Delta T_1=m_2\Delta T_2\\\Rightarrow 12(T-75)=20(140-T)\\\Rightarrow 12T-900=2800-20T\\\Rightarrow 12T+20T=2800+900\\\Rightarrow 32T=3700\\\Rightarrow T=\dfrac{3700}{32}\\\Rightarrow T=115.625^{\circ}\text{F}[/tex]

The final temperature of the solution is [tex]115.625^{\circ}\text{F}[/tex].

write the chemical formula of tetraphosporus osctasulfide

Answers

Answer:

P4S8 .

the chemical formula of Tetraphosporus osctasulfide is p4S8


do seeds need energy to germinate

Answers

Answer:

Seeds need oxygen so that they can produce energy for germination and growth. The embryo gets energy by breaking down its food stores. Like all organisms, this is done through a process known as aerobic respiration. —a series of reactions where energy is released from glucose, using oxygen.

The chart shows the frequencies of certain colors of visible light. A 2 column table with 4 rows. The first column is labeled light with entries red, violet, green, orange. The second column is labeled frequency in hertz with entries 4.5 times 10 Superscript 14 baseline, 7.5 times 10 Superscript 14 baseline, 6.0 times 10 Superscript 14 baseline, 5.0 times 10 Superscript 14 baseline. Which colors will eject electrons when they strike sodium, which has a frequency threshold of 5.7 × 1014 Hz? violet and green red and orange violet only red, violet, green, and orange

Answers

Answer:

Violet only

Explination:

Violet is the only color that will eject electrons when it strikes sodium.

The colors that will eject electrons when there's a strike with sodium from the chart will be A. Violet and green.

Electrons

From the complete information, William made a chart in order to illustrate the result of the experiment that was made with the photoelectric effect.

In this case, the colors that will eject electrons when they strike sodium, with the frequency threshold will be violet and green.

This was gotten from the result that the frequencies of light were lower than the frequency threshold.

Learn more about electrons on:

https://brainly.com/question/860094

Write the molecular, ionic, and net ionic equations for the reaction of Sr(NO3)2(aq) and Li2SO4(aq).

Answers

Answer:

Molecular: [tex]Sr(NO_3)_2(aq) +Li_2SO_4(aq)\rightarrow SrSO_4(s)+2LiNO_3(aq)[/tex]

Ionic: [tex]Sr^{2+}(aq)+2NO_3^-(aq) +2Li^{2+}(aq)+SO_4(aq)^{2-}\rightarrow SrSO_4(s)+2Li^+(aq)+2NO_3^-(aq)[/tex]Net ionic: [tex]Sr^{2}(aq)+SO_4(aq)^{2-}\rightarrow SrSO_4(s)[/tex]

Explanation:

Hello!

In this case, since the molecular, ionic and net ionic equations show the complete molecules, ions and resulting ions respectively, for the reaction between strontium nitrate and lithium sulfate, we can notice the formation of solid strontium sulfate and lithium nitrate as shown below:

[tex]Sr(NO_3)_2(aq) +Li_2SO_4(aq)\rightarrow SrSO_4(s)+2LiNO_3(aq)[/tex]

Which is the molecular equation showing both reactants and products as molecules. Then, the ionic equation shows all the reactants and products as ions, considering that aqueous solutions dissociate whereas solid, liquid and gaseous molecules do not, therefore, we obtain:

[tex]Sr^{2+}(aq)+2NO_3^-(aq) +2Li^{2+}(aq)+SO_4(aq)^{2-}\rightarrow SrSO_4(s)+2Li^+(aq)+2NO_3^-(aq)[/tex]

Finally, for the net ionic equation, we cancel out the spectator ions, which are those at both reactants and products:

[tex]Sr^{2+}(aq)+SO_4(aq)^{2-}\rightarrow SrSO_4(s)[/tex]

Best regards!

Molecular equation - [tex]Sr(NO_3)_2(aq) +Li_2SO_4(aq) \rightarrow SrSO_4 (s) +2LiNO_3 (aq)[/tex]Ionic - [tex]Sr^{2+} (aq) +2NO_3^- (aq) +2Li^+ (aq)+ SO_4^{2-} (aq) \rightarrow SrSO_4 (s)+2Li^+ (aq) +2NO_3^- (aq)[/tex]Net ionic - [tex]Sr^{2+}(aq)+SO_4^{2-} (aq) \rightarrow SrSO_4 (s)[/tex]

A further explanation is below.

Given:

[tex]Sr(NO_3)_2 (aq)[/tex] (Strontium nitrate)[tex]L1_2SO_4 (aq)[/tex] (Lithium sulfate)

Strontium nitrate reacts with Lithium sulfate just to produce Strontium sulfate ([tex]Sr(NO_3)_2[/tex]) and Lithium nitrate ([tex]Li NO_3[/tex]).

The molecular equation will be:

→ [tex]Sr(NO_3)_2(aq) +Li_2SO_4(aq) \rightarrow SrSO_4 (s) +2LiNO_3 (aq)[/tex]

The complete ionic equation will be:

→ [tex]Sr^{2+} (aq) +2NO_3^- (aq) +2Li^+ (aq)+ SO_4^{2-} (aq) \rightarrow SrSO_4 (s)+2Li^+ (aq) +2NO_3^- (aq)[/tex]

By removing the uncharged ions from equation's will be:

Spectator ion:

→ [tex]2Li^+ (aq), 2NO_3^- (aq)[/tex]

Net ionic equation will be:

→ [tex]Sr^{2+}(aq)+SO_4^{2-} (aq) \rightarrow SrSO_4 (s)[/tex]

Thus the response above is right.

Learn more:

https://brainly.com/question/13843770

Sunday
Monday
What
The
Freak
Saturday

Answers

Answer
Long live Pop smoke
Explanation
Other Questions
I'll mark you brainiest if you give me the correct answer. I need help someone please 4(3x + 2) = 4(2x + 3) + 4x idenify the slope and y-intercept of the function y=-2x+3 Solve for x. Round your answer to the nearest tenth if necessary. let f(x) = x^4 -4x^2 +3x find f(-3) a.-54 b.36 c.-126 d.108 How is the current tension of government "for the people and by the people" versus individual authority rooted in our democracy? SOME DA*MNHELP ME WITH THIS SH*T 101.101 correctly written out in words Forests cover about 31% of the land on Earth, but, sadly, that number is decreasing at a rapid rate. Deforestation, human-driven and natural loss of trees, is one of the main causes of this depletion. A natural loss of trees might come from a fire, for example, but deforestation done by humans is more common and involves removing trees to make room for something else. This can include clearing the land for farming or using the wood from trees for fuel, construction, or manufacturing. Despite these potential economic benefits, deforestation should be stopped because forests are too important for people, animals, and the environment. Write three to five sentences explaining how the author develops the key concept in this paragraph. What did the Great Schism split?Athe Holy Roman Empire and the Byzantine Empire 1.Think about the five steps to writing an algorithm. Why is each step necessary? 2.Why is it important to be precise when writing computer code? 3.Some problems are better solved by a computer and some are better solved by humans. How do you know when a problem should be solved by a computer or by a person? 4.Theres a scientific theory out there that says that our brain uses an algorithm to create our thoughts and its called the Theory of Connectivity. This theory suggests that information comes into our brains, is processed, stored, and then results in an output. Does this process sound familiar to you? In what ways do our bodies take in input and respond, sometimes without our control? Give two examples. 5.In what ways is the human brain like a computer? In what ways is it different? (100) points What igneous rock is non-vesicular and glassy in texture and has a mafic composition? Kevin found his average number of text messages sent over three days using the expression below. Which statement best describes the number of the expression? What causes conflict to impact relationships?What types of conflict are there? How can youimprove communication? Need help with 4.7 lesson practice Which statement accurately describes one aspect of plate tectonics that involves subduction and seafloor spreading? Older crust is melted at subduction zones.Crust is created at the coastlines of continents.Continents do not move as a result of seafloor spreading and subduction.Crust is created as the mantle hardens under the lithosphere. membership to iron gym cost $40 per month plus $30 registration fee. the monthly cost is deducted automatically from your account. if your starting balance is $350 how many months will you be able to go to the gym before you have to add money to your account?A. 6B. 7C. 8D. 9 Courtney belongs to a health club that charges a monthly fee of $20, plus $85 to join. Write a function to represent her costs. How much has she paid after six months? Consider the statement: "The president of the United States is a United States citizen."Is the statement a grammatically correct sentence?What is the subject of the sentence? What is the verb in the sentence?Is the sentence true? ASAP 30 points and BRAINLIEST!! PLS!