A spaceship heading straight towards the Earth at 0.85c can shoot a canister at 0.25c relative to the ship. If the canister is shot directly at Earth, the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.931. If it is shot directly away from the Earth then the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.387.
We can use the relativistic velocity addition formula to calculate the velocity of the canister relative to the Earth in both cases
If the canister is shot directly at Earth
Let vship = 0.85c be the velocity of the spaceship relative to Earth, and vcanister = 0.25c be the velocity of the canister relative to the spaceship. Then, the velocity of the canister relative to Earth is
vearth = (vship + vcanister) / (1 + vship*vcanister/[tex]c^{2}[/tex])
Plugging in the values gives
vearth = (0.85c + 0.25c) / (1 + 0.85c*0.25c/[tex]c^{2}[/tex]) = 0.931c
So the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.931.
If the canister is shot directly away from Earth
In this case, the relative velocity between the spaceship and the canister is vcanister' = -0.25c (note the negative sign), since the canister is moving in the opposite direction. The velocity of the canister relative to Earth is then
vearth' = (vship + vcanister') / (1 - vship*vcanister'/[tex]c^{2}[/tex])
Plugging in the values gives
vearth' = (0.85c - 0.25c) / (1 - 0.85c*(-0.25c)/[tex]c^{2}[/tex]) = 0.387c
So the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.387.
To know more about velocity here
https://brainly.com/question/31325078
#SPJ4
How can you determine the type of inhibitor from a Dixon Plot (1/V vs [Inhibitor])?
The type of inhibitor from a Dixon Plot (1/V vs [Inhibitor]) can determine by examining the intersection points of the lines in the plot.
A Dixon plot is a graph used to determine the type of inhibitor in a reaction. The slope of the line on the graph can help identify the type of inhibitor present. If the line on the Dixon plot intersects with the y-axis (1/V axis), then the inhibitor is a competitive inhibitor. This is because a competitive inhibitor competes with the substrate for the active site of the enzyme. As the concentration of the inhibitor increases, the rate of the reaction decreases, resulting in a higher value on the y-axis.
If the line on the Dixon plot does not intersect with the y-axis, but instead intersects with the x-axis ([Inhibitor] axis), then the inhibitor is a non-competitive inhibitor. This type of inhibitor binds to the enzyme at a site other than the active site, altering the shape of the enzyme and reducing its activity. This results in a decrease in the rate of the reaction without affecting the affinity of the enzyme for the substrate.
In conclusion, a Dixon plot can help determine the type of inhibitor present in a reaction by analyzing the slope of the line on the graph. If the line intersects with the y-axis, the inhibitor is competitive, and if it intersects with the x-axis, the inhibitor is non-competitive.
Learn more about inhibitor: https://brainly.com/question/31819551
#SPJ11
10.62 using the aluminum alloy 2014-t6, determine the largest allowable length of the aluminum bar ab for a centric load p of magnitude (a) 150 kn, (b) 90 kn, (c) 25 kn.
The largest allowable length of the aluminum bar ab would be determined by the maximum length that maintains the required diameter for each centric load magnitude.
To determine the largest allowable length of the aluminum bar ab for a centric load of magnitude (a) 150 kn, (b) 90 kn, (c) 25 kn using aluminum alloy 2014-t6, we need to use the formula for the maximum allowable stress:
σ = P / A
Where σ is the maximum allowable stress, P is the centric load magnitude, and A is the cross-sectional area of the aluminum bar.
For aluminum alloy 2014-t6, the maximum allowable stress is 324 MPa.
(a) For a centric load of 150 kn, the cross-sectional area required would be:
A = P / σ = (150,000 N) / (324 MPa) = 463.0 mm^2
Using the formula for the area of a circle, we can determine the diameter of the required aluminum bar:
A = πd^2 / 4
d = √(4A / π) = √(4(463.0 mm^2) / π) = 24.3 mm
Therefore, the largest allowable length of the aluminum bar ab would be determined by the maximum length that maintains a diameter of 24.3 mm.
(b) For a centric load of 90 kn, the required diameter would be:
d = √(4(90,000 N) / π(324 MPa)) = 19.8 mm
(c) For a centric load of 25 kn, the required diameter would be:
d = √(4(25,000 N) / π(324 MPa)) = 12.1 mm
To know more about magnitude visit:
brainly.com/question/28173919
#SPJ11
a single slit experiment forms a diffraction pattern with the fourth minima 5.9 when the wavelength is . determine the angle of the 14 minima in this diffraction pattern (in degrees).
The approximate measurement for the angle of the 14th minimum in this diffraction pattern is 58.6 degrees.
How to calculate diffraction angle?We can use the single-slit diffraction formula to find the angle of the 14th minimum in this diffraction pattern. The formula is:
sin θ = mλ / b
where θ is the angle of the minimum, m is the order of the minimum (m = 1 for the first minimum, m = 2 for the second minimum, and so on), λ is the wavelength of the light, and b is the width of the slit.
Given:
m = 14 (order of the minimum)
λ = (unknown)
b = (unknown)
mλ for the 4th minimum = 5.9
We can find the wavelength of the light by using the known value of mλ for the fourth minimum:
sin θ4 = mλ / b
sin θ4 = (4λ) / b
λ = (b sin θ4) / 4
λ = (b sin (tan[tex]^(-1)[/tex](5.9 / 4))) / 4
λ = (b * 0.988) / 4
λ = 0.247b
Now we can use the value of λ to find the angle of the 14th minimum:
sin θ14 = mλ / b
sin θ14 = (14λ) / b
sin θ14 = 3.43λ / b
sin θ14 = 3.43(0.247b) / b
sin θ14 = 0.847
θ14 = sin[tex]^(-1)[/tex](0.847)
θ14 ≈ 58.6 degrees
Therefore, the angle of the 14th minimum in this diffraction pattern is approximately 58.6 degrees.
Learn more about angle
brainly.com/question/28451077
#SPJ11
Approximate Lake Superior by a circle of radius 162 km at a latitude of 47°. Assume the water is at rest with respect to Earth and find the depth that the center is depressed with respect to the shore due to the centrifugal force.
The center of Lake Superior is depressed by 5.2 meters due to the centrifugal force at a radius of 162 km and a latitude of 47°.
When a body rotates, objects on its surface are subject to centrifugal force which causes them to move away from the center.
In this case, Lake Superior is assumed to be at rest with respect to Earth and a circle of radius 162 km at a latitude of 47° is drawn around it.
Using the formula for centrifugal force, the depth that the center of the lake is depressed with respect to the shore is calculated to be 5.2 meters.
This means that the water at the center of Lake Superior is pushed outwards due to the centrifugal force, causing it to be shallower than the shore.
Understanding the effects of centrifugal force is important in many areas of science and engineering.
For more such questions on force, click on:
https://brainly.com/question/388851
#SPJ11
Determine the normal force, shear force, and moment at point C. Take that P1 = 12kN and P2 = 18kN.
a) Determine the normal force at point C.
b) Determine the shear force at point C.
c) Determine the moment at point C.
Answer:
12×8=848
Explanation:
repell forces
You are given the following consumption function C = 50 + .80YD. What is the amount of autonomous consumption expenditures?
75
100
5
50
The amount of autonomous consumption expenditures is 50. Your answer is: 50.
The amount of autonomous consumption expenditures is 50. This is because autonomous consumption expenditures are the amount of spending that occurs regardless of income. In this consumption function, the constant term of 50 represents the autonomous consumption expenditures.
the amount of autonomous consumption expenditures in the consumption function C = 50 + .80YD, you need to identify the constant term, which is the part of the equation not dependent on YD (disposable income).
In this consumption function, the constant term is 50. Therefore, the amount of autonomous consumption expenditures is 50. Your answer is: 50.
Learn more about consumption function
brainly.com/question/31663793
#SPJ11
At the measured frequency, what is the ratio of the capacitive reactance of a typical clavus sample to that of verruca?]
It is a measure of the opposition that a capacitor provides to the flow of an alternating current. The value of capacitive reactance is inversely proportional to the frequency of the alternating current.
The ratio of the capacitive reactance of a typical clavus sample to that of verruca will depend on the frequency at which it is measured. At low frequencies, the capacitive reactance of both clavus and verruca will be similar
However, as the frequency increases, the capacitive reactance of the clavus sample will decrease at a faster rate compared to verruca. This is because the clavus sample is denser than verruca and has a higher dielectric constant.
To know more about alternating current visit:-
https://brainly.com/question/11673552
#SPJ11
(a) calculate the mass flow rate (in grams per second) of blood ( = 1.0 g/cm3) in an aorta with a cross-sectional area of 2.0 cm2 if the flow speed is 33 cm/s.
The mass flow rate of blood in the aorta is 6.6 grams per second.
The mass flow rate of blood is given by:
mass flow rate = density x volume flow rate
The volume flow rate Q is given by:
Q = A x v
where A is the cross-sectional area of the aorta and v is the flow speed.
Substituting the given values, we have:
Q = 2.0 [tex]cm^2[/tex] x 33 cm/s = 66 [tex]cm^3[/tex]/s
Converting to liters per second:
Q = 66 [tex]cm^3[/tex]cm^3/s x (1 L/1000 [tex]cm^3[/tex]) = 0.066 L/s
The density of blood is 1.0 [tex]g/cm^3[/tex]. Thus, the mass flow rate is:
mass flow rate = 1.0 [tex]g/cm^3[/tex] x 0.066 L/s x 1000 [tex]cm^3/L[/tex] = 6.6 g/s
Learn more about mass flow rate here:
https://brainly.com/question/30763861
#SPJ11
(giving brainliest)
what is a description of the federalist views
The Federalist views advocated for a strong central government, separation of powers, checks and balances, and the ratification of the United States Constitution.
The Federalist views, as expressed in a series of essays known as The Federalist Papers, emphasized the need for a strong central government to maintain stability and protect individual liberties. They believed that a system of checks and balances, with power divided between the three branches of government (legislative, executive, and judicial), would prevent the concentration of power and safeguard against tyranny. The Federalists supported the ratification of the United States Constitution, arguing that it would provide a more effective government compared to the Articles of Confederation. They saw the Constitution as a means to unite the states, promote commerce, and establish a strong national defense, ensuring the success and longevity of the young nation.
learn more about Federalist here:
https://brainly.com/question/14385827
#SPJ11
An aimless physics student, wandering around on a flat plane, takes a step in a random direction each second. (a) After one year of continuous random walking, what is the student's expected distance from his starting point? (b) If the student wandered in 3D space, rather than in a plane, but still took steps each second in random directions, would his expected distance from the origin be greater, less, or the same as before. Explain
After one year of continuous random walking on a flat plane, the expected distance from the student's starting point is 0. (b) If the student wandered in 3D space instead, the expected distance from the origin would still be 0.
To understand why the student's expected distance from the starting point would be approximately zero, it is helpful to consider the concept of a random walk. A random walk is a mathematical model that describes the path of a particle that moves randomly in space or time. In the case of the physics student, each step they take is random and has an equal probability of moving in any direction. Over time, these steps will result in the student moving in all directions equally, resulting in an expected distance of zero from the starting point. In 3D space, the student would have more directions available to them, which means that they have a greater chance of moving away from the origin. However, the exact distance from the origin would still be difficult to determine due to the random nature of the steps. This is because the student could take steps in any direction, including back towards the origin.
In a random walk on a flat plane, the steps taken in each direction will average out over time, and the net displacement from the starting point will approach 0. This is because the student has an equal probability of taking steps in any direction, and thus, the steps tend to cancel each other out over a long period. (b) Similarly, in a 3D random walk, the steps taken in each direction (x, y, and z) will also average out over time, leading to a net displacement of 0 from the origin. Just like in the 2D case, the student has an equal probability of taking steps in any direction, so the steps tend to cancel each other out over a long period.
To know more about flat visit:
https://brainly.com/question/31227125
#SPJ11
a spring with a spring constant of 8.50 n/m is compressed 4.00 m. what is the force that the spring would apply
The force that the spring would apply can be calculated using the formula F = kx, where F is the force, k is the spring constant, and x is the distance the spring is compressed.
we have a spring constant of 8.50 N/m and a compression distance of 4.00 m. Plugging these values into the formula, we get ,F = 8.50 N/m x 4.00 m ,F = 34 N Therefore, the force that the spring would apply is 34 N.
To calculate the force applied by a spring, we use Hooke's Law, which is given by the formula F = -k * x, where F is the force applied by the spring, k is the spring constant, and x is the compression or extension of the spring. In this case, the spring constant k is 8.50 N/m, and the compression x is 4.00 m. Plugging these values into the formula, we get F = -8.50 N/m * 4.00 m F = -34 N, the magnitude of the force is 34 N.
To know more about force visit :
https://brainly.com/question/13191643
#SPJ11
according to the kinetic molecular theory of gases, the volume of the gas particles (atoms or molecules) is
According to the kinetic molecular theory of gases, the volume of the gas particles, which can be atoms or molecules, is considered to be negligible compared to the volume of the container that they occupy. The gas particles are assumed to be point masses.
This assumption is based on the fact that at normal temperatures and pressures, the space between gas particles is much larger than the size of the particles themselves. Therefore, the particles can be treated as point masses without significantly affecting the overall behavior of the gas.
The kinetic molecular theory of gases provides a useful framework for understanding the behavior of gases at the molecular level, and helps to explain many of the observed properties of gases, such as their pressure, volume, temperature, and the relationships between them, such as the ideal gas law.
To know more about kinetic molecular refer here
https://brainly.com/question/1869811#
#SPJ11
A wooden ring whose mean diameter is 14.5 cm is wound with a closely spaced toroidal winding of 615 turns.
Compute the magnitude of the magnetic field at the center of the cross section of the windings when the current in the windings is 0.640 A .
The magnitude of the magnetic field at the center of the cross section of the windings is 3.95 x 10^-3 T.
To solve this problem, we can use the equation B = (μ0 * n * I) / (2 * r), where B is the magnetic field, μ0 is the permeability of free space (4π x 10^-7 T m/A), n is the number of turns per unit length (in this case, it's just the total number of turns divided by the mean circumference of the ring), I is the current, and r is the mean radius of the ring.
First, we need to find the mean circumference and mean radius of the ring. The mean diameter is given as 14.5 cm, so the mean radius is 7.25 cm. The mean circumference is 2πr, which is approximately 45.5 cm.
Next, we can calculate n by dividing the total number of turns (615) by the mean circumference (45.5 cm) to get 13.5 turns/cm.
Now we can plug in all the values into the equation and solve for B:
B = (4π x 10^-7 T m/A) * (13.5 turns/cm) * (0.640 A) / (2 * 0.0725 m)
B = 3.95 x 10^-3 T
Therefore, the magnitude of the magnetic field at the center of the cross section of the windings is 3.95 x 10^-3 T.
learn more about magnetic field
https://brainly.com/question/14411049
#SPJ11
1. If the Fed wants to lower the federal funds rate, it shoulda. sell government securities in the open marketb. increase the reserve ratioc. increase the discount rated. buy government securities in the open market
If the Fed wants to lower the federal funds rate, it should buy government securities in the open market. This will increase the amount of money available in the banking system, leading to a decrease in the federal funds rate.
Selling government securities in the open market would have the opposite effect and raise the federal funds rate. Increasing the reserve ratio would require banks to hold more reserves and would also raise the federal funds rate. Increasing the discount rate would make borrowing from the Fed more expensive, which could indirectly increase the federal funds rate.
If the Fed wants to lower the federal funds rate, it should d. buy government securities in the open market.
By purchasing government securities, the Fed increases the supply of money in the economy. This results in a lower federal funds rate as banks have more funds available for lending, leading to increased demand for loans and lower borrowing costs.
To know more about Federal visit:
https://brainly.com/question/8305583
#SPJ11
Sam pulls Frodo (who has a mass of 40 kg) across the ground with a force of 10 N. If the friction between Frodo and the ground is 7 N, what is Frodo's acceleration?
0. 075 m/s2
0. 425 m/s2
120 m/s2
680 m/s2
Frodo's acceleration when pulled by Sam with a force of 10 N, considering the friction between Frodo and the ground (7 N), is 0.075 m/s².
To determine Frodo's acceleration, we need to consider the forces acting on him. The force applied by Sam is 10 N, and the friction between Frodo and the ground is 7 N.
The net force acting on Frodo can be calculated by subtracting the frictional force from the applied force: 10 N - 7 N = 3 N. According to Newton's second law of motion, the net force is equal to the product of mass and acceleration, so we can rearrange the formula to solve for acceleration: acceleration = net force / mass.
Plugging in the values, we get acceleration = 3 N / 40 kg = 0.075 m/s². Therefore, Frodo's acceleration in this scenario is 0.075 m/s².
Learn more about friction here
brainly.com/question/28356847
#SPJ11
determine whether each item is a property of asteroids, kuiper belt objects (kbos), or both.include Vesta Similar in composition to comets mostly rock and metals majority are small bodies mostly reside in a belt between Mars and Jupiter mostly reside in a belt extending 20 AU beyond the orbit of Neptune include Platohave similaritieis to some moons
Based on the terms and information provided, here is a breakdown of the properties for asteroids and Kuiper Belt Objects (KBOs):
1. Vesta: This is a property of asteroids, as Vesta is one of the largest asteroids in the asteroid belt between Mars and Jupiter.
2. Similar in composition to comets (mostly rock and metals): This is a property of asteroids, as they are primarily composed of rock and metals, whereas KBOs are mostly composed of ices.
3. Majority are small bodies: This is a property of both asteroids and KBOs, as both types of objects consist of numerous small celestial bodies.
4. Mostly reside in a belt between Mars and Jupiter: This is a property of asteroids, as the asteroid belt is located between the orbits of Mars and Jupiter.
5. Mostly reside in a belt extending 20 AU beyond the orbit of Neptune: This is a property of KBOs, as the Kuiper Belt extends from about 30 to 50 AU from the Sun.
6. Pluto: This is a property of KBOs, as Pluto is considered a dwarf planet and is located within the Kuiper Belt.
7. Similarities to some moons: This is a property of both asteroids and KBOs, as both types of objects can have characteristics and compositions similar to certain moons in our solar system.
To know more about Kuiper Belt, click here;
https://brainly.com/question/25583240
#SPJ11
The numerical value for the position of the S on the optical bench is given by Х (A) 540 mm (B) 547 mm (C) 514 mm (D) 563 mm(E) None of the other offered answers.
The numerical value for the position of the S on the optical bench is given by option B, which is 547 mm.
This value represents the distance between the S and the starting point of the optical bench. The optical bench is a tool used to measure and test the properties of light, such as reflection and refraction.
By knowing the precise position of the objects on the optical bench, one can accurately measure and analyze the behavior of light. Therefore, it is essential to know the numerical value for the position of the S on the optical bench to perform accurate experiments and obtain reliable results.
To know more about optical bench click on below link:
https://brainly.com/question/31576139#
#SPJ11
If the display is located 12.6 cm from the 12.0-cm focal length lens of the projector, what is the distance between the screen and the lens?
What is the height of the image of a person on the screen who is 3.0 cm tall on the display?
The distance between the screen and the lens is 144 cm.
The height of the image of a 3.0 cm tall person on the screen is 34.3 cm.
We can use the thin lens equation to determine the distance between the screen and the lens:
1/f = 1/do + 1/di
1/di = 1/f - 1/do
1/di = 1/12.0 cm - 1/12.6 cm
1/di = 0.0833 cm⁻¹
di = 12.0 cm / 0.0833 cm⁻¹
di = 144 cm
To find the height of the image of a 3.0 cm tall person on the screen, we can use the magnification equation:
m = -di/do
m = -di/do
m = -(144 cm)/(12.6 cm)
m = -11.43
height of image = magnification x height of object
height of image = (-11.43) x (3.0 cm)
height of image = -34.3 cm
Learn more about optic: https://brainly.com/question/31448088
#SPJ11
An electron is acted upon by a force of 5.50×10−15N due to an electric field. Find the acceleration this force produces in each case:
Part A
The electron's speed is 4.00 km/s . ---ANSWER---: a=6.04*10^15 m/s^2
Part B
The electron's speed is 2.60×108 m/s and the force is parallel to the velocity.
In Part A, the electron's speed is given as 4.00 km/s and the force acting on it due to the electric field is 5.50×10−15N. To find the acceleration produced by this force,
we can use the equation F = ma, where F is the force, m is the mass of the electron, and a is the acceleration. As the mass of the electron is very small,
we can use the equation a = F/m. Therefore, the acceleration produced by this force in Part A is:
a = F/m = (5.50×10−15N) / (9.11×10−31kg) = 6.04×10^15 m/s^2
In Part B, the force acting on the electron is parallel to its velocity. This means that the force does not change the direction of the electron's motion, but only its speed.
As the electron is moving with a constant velocity, we can assume that its acceleration is zero. This means that the force acting on the electron must be balanced by another force,
such as a magnetic force, that prevents the electron from changing its direction of motion. Therefore, the acceleration produced by the force in Part B is zero.
To know more about electron's speedrefer here
https://brainly.com/question/30194771#
#SPJ11
An amusement park ride features a passenger compartment of mass M that s released from rest at point A. as shown in the figure above, and moves along a track to point E. The compartment is in free fall between points A and B. which are a distance of 3R/4 apart, then moves along the circular arc of radius R between points B and D. Assume the track U frictionless from point A to point D and the dimensions of the passenger compartment are negligible compared to R.
The amusement park ride begins with the passenger compartment at rest at point A. As it moves along the track to point B, the compartment is in free fall due to gravity. The distance between points A and B is 3R/4.
The force acting on the passenger compartment is gravity, which causes it to accelerate downward as it moves from point A to point B. Once the compartment reaches point B, it is no longer in free fall and the force acting on it is centripetal force, which keeps it moving in a circular path along the arc. The dimensions of the passenger compartment are negligible compared to R, which means that its mass can be considered to be concentrated at a single point. This simplifies the calculations involved in determining the ride's motion.
When the passenger compartment is released from rest at point A, it is in free fall between points A and B, which are 3R/4 apart. During this free fall, the gravitational potential energy is being converted into kinetic energy. As it moves along the circular arc of radius R between points B and D, the compartment's speed is determined by the conservation of mechanical energy.
To know more about gravity visit:
https://brainly.com/question/31321801
#SPJ11
A certain circuit breaker trips when the rms current is 12.0 a. what is the corresponding peak current (in a)?
Required the corresponding peak current is 16.97 A.
The corresponding peak current can be calculated using the formula Ipeak = Irms * √2. Therefore, the peak current for a circuit breaker that trips at 12.0 A
RMS current would be Ipeak = 12.0 * √2 = 16.97 A (rounded to two decimal places). It's important to note that peak current represents the maximum instantaneous current that a circuit can handle, while RMS current represents the equivalent heating effect of a steady DC current. In other words, a circuit breaker is designed to protect against overloading caused by peak currents, which can be higher than the corresponding RMS current.
Learn more about current here,
https://brainly.com/question/30611906
#SPJ11
Given the information in Table 5.1 be able to determine the resistance of a particular resistor and whether an experimental measurement is within tolerance.
What steps can be taken to determine the resistance of a particular resistor and whether an experimental measurement of the resistor falls within tolerance, based on the information provided in Table 5.1?
What steps can be taken to determine the resistance of a particular resistor and whether an experimental measurement of the resistor falls within tolerance, based on the information provided in Table 5.1?Table 5.1 contains information about the standard resistance values for resistors with a tolerance of 5%, based on the E24 series.
To determine the resistance of a particular resistor, you would need to measure its value using a multimeter or other measuring device.
Once you have measured the resistance, you can compare it to the values listed in Table 5.1 to determine whether it falls within tolerance.
For example, if you have a resistor with a nominal value of 1.2 kΩ and a tolerance of 5%, its actual value can range from 1.14 kΩ to 1.26 kΩ.
If your measured value falls within this range, then the resistor is within tolerance. If it falls outside of this range, then the resistor is not within tolerance and may need to be replaced.
It is important to note that the tolerance of a resistor refers to the range of acceptable values for the resistor's actual resistance, not the accuracy of the measuring device.
If the measured value is outside of the tolerance range, it is not necessarily a reflection of an inaccurate measuring device.
Learn more about experimental measurement
brainly.com/question/31953030
#SPJ11
A solid sphere of mass 1.5 kg and radius 15 cm rolls without slipping down a 35° incline that is 7.0 m long. assume it started from rest. the moment of inertia of a sphere is given by i= (2/5)mr2.
At the bottom of the incline, the sphere has a translational velocity of 6.32 m/s and a rotational velocity of 42.13 rad/s, and the total energy is split between kinetic and rotational energy with KE = 37.58 J and RE = 21.28 J.
The motion of the sphere can be analyzed by considering its potential energy (PE), kinetic energy (KE), and rotational energy (RE).
At the top of the incline, all of the energy is in the form of potential energy:
PE = mgh
where
m is the mass of the sphere,
g is the acceleration due to gravity (9.81 m/s^2), and
h is the height of the incline.
The height can be calculated as follows:
h = sin(35°) x 7.0 m
= 4.0 m
PE = (1.5 kg)(9.81 m/s²)(4.0 m)
= 58.86 J
As the sphere rolls down the incline, its potential energy is converted to kinetic energy and rotational energy.
The kinetic energy can be calculated using the translational velocity of the sphere:
[tex]KE = (1/2)mv^2[/tex]
where
v is the velocity of the sphere.
The velocity can be calculated using the conservation of energy principle, which states that the total energy (PE + KE + RE) remains constant:
PE = KE + RE
At the bottom of the incline, all of the potential energy has been converted to kinetic energy and rotational energy, so the total energy is:
PE = 0
KE + RE = 58.86 J
The translational velocity of the sphere can be calculated from the KE as follows:
[tex]KE = (1/2)mv^2[/tex]
[tex]v = \sqrt{(2KE/m)[/tex]
[tex]v = \sqrt{(2(58.86 J)/(1.5 kg))[/tex]
= 6.32 m/s
The rotational energy of the sphere can be calculated using its moment of inertia:
[tex]RE = (1/2)Iw^2[/tex]
where
I is the moment of inertia of the sphere,
w is its angular velocity, and
RE is its rotational energy.
The moment of inertia of a solid sphere is given by
[tex]I = (2/5)mr^2[/tex]
[tex]I = (2/5)(1.5 kg)(0.15 m)^2[/tex]
= 0.0225 kg*m²
Since the sphere is rolling without slipping, the translational velocity of the sphere is related to its angular velocity by:
v = rw
where
r is the radius of the sphere.
Solving for w:
w = v/r
= (6.32 m/s)/(0.15 m)
= 42.13 rad/s
The rotational energy of the sphere can now be calculated:
[tex]RE = (1/2)Iw^2[/tex]
[tex]= (1/2)(0.0225 kg*m^2)(42.13 rad/s)^2[/tex]
= 21.28 J
Therefore, at the bottom of the incline, the sphere has a translational velocity of 6.32 m/s and a rotational velocity of 42.13 rad/s, and the total energy is split between kinetic and rotational energy with KE = 37.58 J and RE = 21.28 J.
To know more about rotational velocity refer here
brainly.com/question/26095104#
#SPJ11
The angle of repose for fine sand is [x] degrees. Insert a number. You need to be accurate to within 2 degrees (no partial degrees please - only whole numbers 90, 91 etc.).
The ground motion in a Richter magnitude 7 earthquake is [x] times larger than in a Richter magnitude 4 earthquake.
The angle of repose for fine sand is 35 degrees.
The ground motion in a Richter magnitude 7 earthquake is 10,000 times larger than in a Richter magnitude 4 earthquake. The angle of repose for fine sand is typically around 34 degrees. This can vary slightly, but it should be accurate within 2 degrees.
The ground motion in a Richter magnitude 7 earthquake is 1,000 times larger than in a Richter magnitude 4 earthquake. This is because each whole number increase on the Richter scale corresponds to a 10-fold increase in ground motion.
To know more about angle of repose visit:
https://brainly.com/question/10218873
#SPJ11
at some point in space a plane electromagnetic wave has the electric field = (381 j^ 310 k^ ) n/c. caclulate the magnitude of the magnetic field a that point.
The magnitude of the magnetic field at that point is approximately 1.65 x 10⁻⁶ Tesla.
The magnitude of the magnetic field at the given point, we can use the relationship between the electric and magnetic fields in an electromagnetic wave: E = cB, where E is the electric field, B is the magnetic field, and c is the speed of light.
We can rearrange this equation to solve for B: B = E/c
Plugging in the given values, we get:
B = (381 j + 310 k) n/c / 3 x 10⁸ m/s
To calculate the magnitude of this vector, we can use the Pythagorean theorem: |B| = sqrt(Bj² + Bk²)
where |B| represents the magnitude of B.
Plugging in the values we get:
|B| = sqrt((381/3 x 10⁸)² + (310/3 x 10⁸)²)
|B| = 4.04 x 10⁻⁹ T (rounded to 3 significant figures)
B = E / c
To know more about magnetic field visit:-
https://brainly.com/question/24397546
#SPJ11
An ideal gas at 20∘C consists of 2.2×1022 atoms. 3.6 J of thermal energy are removed from the gas. What is the new temperature in ∘C∘C?
The new temperature of the ideal gas after removing 3.6 J of thermal energy is approximately 12.1°C.
To calculate the new temperature, we'll use the formula for the change in internal energy of an ideal gas, which is ΔU = (3/2)nRΔT, where ΔU is the change in internal energy, n is the number of moles, R is the ideal gas constant, and ΔT is the change in temperature.
First, we need to determine the number of moles (n) from the given number of atoms (2.2 × 10²² atoms). Since 1 mole contains Avogadro's number (6.022 × 10²³) of atoms, we can find n by dividing the number of atoms by Avogadro's number:
n = (2.2 × 10²² atoms) / (6.022 × 10²³ atoms/mol) ≈ 0.0365 moles
Next, we need to find the change in internal energy (ΔU), which is -3.6 J since thermal energy is being removed from the gas.
Now, we can rearrange the formula ΔU = (3/2)nRΔT to solve for the change in temperature (ΔT):
ΔT = ΔU / [(3/2)nR] = -3.6 J / [(3/2)(0.0365 moles)(8.314 J/mol K)] ≈ -7.9°C
Since the initial temperature was 20°C, the new temperature is:
New Temperature = Initial Temperature + ΔT = 20°C -7.9°C ≈ 12.1°C.
To know more about the internal energy, click here;
https://brainly.com/question/14668303
#SPJ11
An aircraft engine takes in an amount 8900 j of heat and discards an amount 6500 j each cycle. What is the mechanical work output of the engine during one cycle? What is the thermal efficiency of the engine?
The mechanical work output of the engine during one cycle can be calculated by subtracting the amount of heat discarded from the amount of heat taken in: Mechanical work output = heat taken in - heat discarded
Mechanical work output = 8900 j - 6500 j
Mechanical work output = 2400 j
Therefore, the mechanical work output of the engine during one cycle is 2400 joules.
The thermal efficiency of the engine can be calculated using the formula:
Thermal efficiency = (mechanical work output / heat taken in) x 100%
Plugging in the values we have:
Thermal efficiency = (2400 j / 8900 j) x 100%
Thermal efficiency = 0.2697 x 100%
Thermal efficiency = 26.97%
Therefore, the thermal efficiency of the engine is 26.97%.
The mechanical work output of the engine during one cycle can be calculated using the following formula:
Work output = Heat input - Heat discarded
In this case, the heat input is 8900 J and the heat discarded is 6500 J. So, the work output can be calculated as:
Work output = 8900 J - 6500 J = 2400 J
The thermal efficiency of the engine can be calculated using the following formula:
Thermal efficiency = (Work output / Heat input) * 100%
Plugging in the values we found:
Thermal efficiency = (2400 J / 8900 J) * 100% = 26.97%
So, the mechanical work output of the engine during one cycle is 2400 J and the thermal efficiency of the engine is approximately 26.97%.
To know more about heat visit:
https://brainly.com/question/30603212
#SPJ11
( a ) A Carnot engine operates between a hot reservoir at 320K and a cold one at 260K. If the engine absorbs 500J as heat per cycle at the hot reservoir, how much work per cycle does it deliver? (b) If the engine working in reverse functions as a refrigerator between the same two reservoirs, how much work per cycle must be supplied to remove 1000J as heat from the cold reservoir?
The Carnot engine delivers 93.75J of work per cycle and the work supplied per cycle to remove 1000J as heat from the cold reservoir is 230.94 J
(a) A Carnot engine operates between two reservoirs and follows a reversible cycle. In this case, the engine operates between a hot reservoir at 320K and a cold one at 260K and absorbs 500J as heat per cycle at the hot reservoir. We can use the Carnot efficiency formula to find the work delivered per cycle:
Efficiency = (Th - Tc) / Th
Efficiency = (320K - 260K) / 320K
Efficiency = 0.1875 or 18.75%
Therefore, the work delivered per cycle can be found by multiplying the efficiency by the heat absorbed:
Work delivered = Efficiency x Heat absorbed
Work delivered = 0.1875 x 500J
Work delivered = 93.75J
(b) If the Carnot engine operates in reverse and functions as a refrigerator between the same two reservoirs, we need to calculate the work that must be supplied per cycle to remove 1000J as heat from the cold reservoir. The coefficient of performance (COP) of a refrigerator is defined as the ratio of heat removed from the cold reservoir to the work supplied to the refrigerator. The COP can be calculated as follows:
COP = Tc / (Th - Tc)
COP = 260K / (320K - 260K)
COP = 4.33
Therefore, the work supplied per cycle can be found by multiplying the COP by the heat removed from the cold reservoir:
Work supplied = Heat removed / COP
Work supplied = 1000J / 4.33
Work supplied = 230.94 J
To know more about the Carnot engine, click here;
https://brainly.com/question/14680478
#SPJ11
most geomorphologist suggest that the long axis of a drumline reflects the direction
Answer:
Most geomorphologists suggest that the long axis of a drumlin reflects the direction of ice flow, with the steepest end facing the direction from which the ice came.
Explanation:
The half-wave rectifier in Fig. P3.88 is operating at a frequency of 60 Hz, and the rms value of the transformer output voltage is 6.3V. (note that Vp = Vrms * V2) (50 points) (a) What is the value of the dc output voltage Vo if the diode voltage drop is 1V? (b) What is the minimum value of C required to maintain the ripple voltage to less than 0.25V ifR 0.522 (c) Repeat (a) at a frequency 600Hz. (d) Repeat (b) at a frequency 600Hz.
The value of the dc output voltage Vo is 7.91 V and the minimum value of C required to maintain the ripple voltage to less than 0.25V is 1.14mF.
(a) The dc output voltage of a half-wave rectifier with a diode voltage drop of 1V can be calculated as:
[tex]V_o = V_p - V_d[/tex]
where [tex]V_P[/tex] is the peak value of the transformer output voltage and [tex]V_d[/tex]is the diode voltage drop.
The peak value of the transformer output voltage can be calculated from the rms value as:
[tex]V_p = V_r_m_s * sqrt(2)[/tex]
Thus, [tex]V_P[/tex] = 6.3 * sqrt(2) = 8.91V
Therefore, [tex]V_0[/tex] = 8.91V - 1V = 7.91V
(b) The ripple voltage of a half-wave rectifier with a capacitor filter can be calculated as:
[tex]V_r[/tex] = ([tex]I_l_o_a_d[/tex] × t) / C
where[tex]I_l_o_a_d[/tex]is the load current, t is the time period of the input waveform (1/60 s for 60 Hz), and C is the value of the capacitor.
The load current can be calculated as:
[tex]I_l_o_a_d[/tex]= [tex]V_p[/tex]/ [tex]R_l_o_a_d[/tex]
where [tex]R_l_o_a_d[/tex] is the value of the load resistor.
Thus,[tex]I_l_o_a_d[/tex] = 8.91V / 0.522 = 17.05mA
To maintain the ripple voltage to less than 0.25V, we can set:
Vr = 0.25V
Thus, C = ([tex]I_l_o_a_d[/tex] × t) / [tex]V_r[/tex] = (17.05mA× (1/60 s)) / 0.25V = 1.14mF
Therefore, the minimum value of C required to maintain the ripple voltage to less than 0.25V is 1.14mF.
To know more about output voltage refer here :
https://brainly.com/question/30502189
#SPJ11