Student 1 lifts a box with a force of 500 N and sets it on a tabletop 1. 2 m high. Student 2 pushes an identical box up a 5 m ramp from the floor to the top of the same table. Which student did the MOST work?.

Answers

Answer 1

The student 2 did the MOST work because he pushed the box to a greater height.

The given parameters:

Force applied by Student 1 = 500 NHeight of table for student 1 = 1.2 mHeight of ramp for student 2 = 5 m

The work done by student 1 is calculated as follows;

Work = P.E = mgh

P.E = 1.2mg

The work done by the student 2 is calculated as;

P.E = 5mg

where;

m is the mass of the box

Thus, we can conclude that the student 2 did the MOST work.

Learn more about work done here: https://brainly.com/question/8119756


Related Questions

Two lumps of clay approach each other from opposite directions and collide head on inelastically, combing into one large lump after they collide. the first lump has a mass of 0.140kg and has a speed of 3.50 m/s before the Collision. the second lump has a mass of 0.620kg and has a speed of 4.81 m/s before the collison in a direction opposite that of the first lump. what velocity does the combined lump have after the collision?

Answers

Answer:

Before collision:

momentum to right = .14 * 3.5 = .49 kg m / s

momentum to left = .62 * 4.81 = 2.98 kg m / s

Total momentum = .49 - 2.98 = - 2.49 to left

M V = -2.49    net momentum to left

V = -2.49 / (.14 + .62) = -3.28 m/s to left

4. In not less than 150 words, write your substantial insights on what you have learned in the past modules in relevance to what is happening now.​

Answers

Answer:

“I think it’s about putting yourself in the students’ shoes and seeing how a first-time student, maybe someone who hasn’t even taken chemistry before, is looking at it.”

—Valerie Taraborelli, undergraduate chemistry student, University of Arizona1

“In some ways, I think the people who are the most successful as teachers are the ones who are able to remember what it was like being uncertain and not knowing. When you become an expert, things are easy. So the idea is to try and see where [students] are coming from and why they’ve developed this misconception and what you can do to specifically address it.”

—Dee Silverthorn, biology professor, University of Texas2

Hope this helps !!

☆ Correct and rewrite the following statements:
_____
e). electroplating is based on magnetic effect of electricity.

f). an electric bulb glows due to the chemical effect of electricity.
_______________________

#No spam
#No Internet answers, please #Explanation needed​

Answers

Answer:

e)Question:-Electroplating is based on magnetic effect of electricity.Answer:-It's incorrect sentence As we know that, while electroplating there are two rods, one becoming cathode and another one becoming anode. During electroplating, when electricity is given through the rods, the anode produces positive ions which gets received at the cathode rod and negative ions produced at cathode collects at anode rod which results to the plating of the desired substance. Here, it is a chemical effect of electricity resulting to plating.

So correct sentence is:

Electroplating is based of chemical effect of electricity.

f)Question:-An electric bulb glows due to the chemical effect of electricity.Answer:-It's incorrect sentence As we know that, in an electric bulb there is a filament. When electricity is given in that filament of the electric bulb, the filament gets intensely heated up and results to the emission of light. Due to this heating of the filament due to electricity the electric bulb glows.

So correct sentence is:

An electric bulb glows due to the heating effect of electricity.

assume that the hubble constant is 72 km/s/mpc. if a galaxy is 100mpc away, how fast is it moving away from us?

Answers

The galaxy is 7200 km/s moving away from us.

A Hubble is a large telescope in space.

The question can be solved using the formula below

⇒ Formula

v = Cd........................ Equation 1

⇒ Where:

v = Speed of the galaxyC = Hubble constantd = Galaxy's distance

⇒ Given:

C = 72 km/s/mpcd = 100 mpc

⇒ Substitute these values into equation 1

v = 72(100)v = 7200 km/s.

Hence, the galaxy is 7200 km/s moving away from us.

Learn more about Hubble here: https://brainly.com/question/14615983

Help me as soon as possible <3​

Answers

Answer: ??? what the

Explanation:

me (5) A taxi is travelling at 15. m/s. Its driver accelerates with acceleration 3 m/s for 4 s. What is its new velocity? A car accelerates from 20 m/s to 30 m/s in 10 (a) Calculate the car's acceleration using v=utat. (b) Draw a velocity-time graph to show the car's motion. Find the distance it travels by calculating the area under the graph. (c) Check your answer by using the equation s = ut + hat Grade 9​

Answers

Answer:

5)

Solution

initial velocity = 15 m/s

acceleration = 3m/s^2

time = 4 s

final velocity = 15+3×4

=15+12

=27m/s

A car accelerates from 20m/s to 30m/s in 10 second

T9 be honest I think some part of the second question is missing

A 0.24 kg mass with a speed of 0.60 m/s has a head-on collision with a 0.26 kg mass that is traveling in the opposite direction at a speed of 0.20 m/s. Assuming that the collision is perfectly inelastic, what is the final speed of the combined masses?

Answers

Answer:

  0.184 m/s

Explanation:

Momentum is conserved. If the velocity of the 0.24 kg mass is positive, then ...

  m1v1+m2v2 = m3v3

  (0.24 kg)(0.60 m/s) +(0.26 kg)(-0.20 m/s) = (0.24 +0.26 kg)(v)

  v = (0.144 -0.052 kg·m/s)/(0.50 kg) = 0.184 m/s

The speed of the combined masses is 0.184 m/s.

_____

Additional comment

The positive sign indicates the combined masses are moving in the direction of the original 0.24 kg mass.

A projectile is thrown with velocity v at an angle θ with horizontal. When the projectile is at a height equal to half of the maximum height, the vertical component of the velocity of projectile is ____? ​

Answers

Let, the maximum height covered by projectile be [tex]\sf{H_m}[/tex]

[tex]\purple{ \longrightarrow \bf{h_m = \dfrac{ {v}^{2} \: {sin}^{2} \theta }{2g} }} [/tex]

Projectile is thrown with a velocity = v Angle of projection = θ

Velocity of projectile at a height half of the maximum height covered be [tex] \sf{v_0}[/tex]

[tex]\qquad[/tex]______________________________

Then –

[tex]\qquad[/tex] [tex]\pink{ \longrightarrow \bf{ \dfrac{h_m}{2} = \dfrac{ {v_0}^{2} \: {sin}^{2} \theta }{2g} }}[/tex]

[tex]\qquad[/tex] [tex] \longrightarrow \sf{ \dfrac{ {v}^{2} \: {sin}^{2} \theta }{2g} \times \dfrac{1}{2} = \dfrac{ {v_0}^{2} \: {sin}^{2} \theta }{2g} }[/tex]

[tex]\qquad[/tex][tex]\longrightarrow \sf{ \dfrac{ {v}^{2} \: {sin}^{2} \theta }{4g} = \dfrac{ {v_0}^{2} \: {sin}^{2} \theta }{2g} }[/tex]

[tex]\qquad[/tex][tex]\longrightarrow \sf{ \dfrac{ {v}^{2} \: {sin}^{2} \theta }{2} = {v_0}^{2} \: {sin}^{2} \theta }[/tex]

[tex]\qquad[/tex][tex] \longrightarrow \sf{ \dfrac{ {v}^{2} }{2} = {v_0}^{2} }[/tex]

[tex]\qquad[/tex][tex] \longrightarrow \bf{v_0 = \sqrt{ \dfrac{ {v}^{2} }{2} } = \dfrac{v}{ \sqrt{2} } }[/tex]

Now, the vertical component of velocity of projectile at the height half of [tex] \sf{h_m}[/tex] will be –

[tex]\qquad[/tex] [tex]\longrightarrow \bf{v_{(y)}=v_0 \: sin \theta }[/tex]

[tex]\qquad[/tex] [tex] \longrightarrow \bf{v_{(y)} = \dfrac{v}{ \sqrt{2} } \: sin \theta = \dfrac{v \: sin \: \theta}{ \sqrt{2} } }[/tex]

Therefore, the vertical component of velocity of projectile at this height will be–

☀️[tex]\qquad[/tex][tex] \pink {\bf{ \dfrac{v \: sin \: \theta}{ \sqrt{2} }} }[/tex]

Answer:

A projectile is thrown with velocity v at an angle θ with horizontal. When the projectile is at a height equal to half of the maximum height, the vertical component of the velocity of projectile is v sintheta / √2

What happens to a liquid in a U-tube manometer when placed in a vacuum

Answers

Answer:

With a greater pressure applied to the left side of a U-tube manometer, the liquid lowers in the left leg and rises in the right leg. The liquid moves until the unit weight of the liquid, as indicated by h, exactly balances the pressure.

Answer:

Here

Explanation:

With a greater pressure applied to the left side of a U-tube manometer, the liquid lowers in the left leg and rises in the right leg. The liquid moves until the unit weight of the liquid

describe the working principle of a hydraulic press using pascals principle

Answers

Answer:

A hydraulic press works on the principle of Pascal's law, which states that when pressure is applied to a confined fluid, the pressure change occurs throughout the entire fluid. Within the hydraulic press, there is a piston that works as a pump, that provides a modest mechanical force to a small area of the sample.

Explanation:

18 through 22 multiple choice please help

Answers

Answer:

18:equilibrium

19:10.8

20:separating the surfaces with a layer of air

21:it remains motionless

22:cm/s

A 263 g ball of clay falls onto a vertical spring.

The spring constant k = 2.52 N/cm.

The clay sticks to the spring and as the spring compresses a distance of 11.8 cm the clay momentarily comes to rest.
Determine the speed of the clay just before it hit the spring in [m/s]?

Answers

As the spring is compressed, it performs

-1/2 (252 N/m) (0.118 m)² ≈ -1.75 J

of work on the clay, while gravity does

(0.263 kg) (9.80 m/s²) (0.118 m) ≈ 0.304 J

on it. Then the total work W performed on the clay ball is approximately -1.45 J.

By the work-energy theorem, W is equal to the change in the clay ball's kinetic energy ∆K. If v is the speed with which it hits the spring, then

W = ∆K

-1.45 J = 0 - 1/2 mv²

Solve for v :

-1.45 J = -1/2 (0.263 kg) v²

v² ≈ 11.0 m²/s²

v ≈ 3.32 m/s

40 POINTSS. Now explore friction force. Set the piece of plastic or wood on the table and push it steadily across the tabletop using your fingertip. Note how much opposition to your push you feel. Repeat the steps, but this time push the piece of plastic or wood across a rug, carpet, or piece of fabric. If you’re using fabric, be sure to secure the fabric so it doesn’t move. How does the opposition to motion on the tabletop compare with that of the rug, carpet, or fabric? WILL MARK BRAINLIST IF RIGHT

Answers

Answer: If there is a higher friction, the opposition force is higher so that it can reduce our speed. So, a factor that affects friction is the roughness or smoothness of the surface of the object. In comparison of the table with the fabric, the fabric will have a more opposition force. As the surface of the fabric is usually rougher than the surface of a smooth table. As there is more friction on a fabric, we will feel more opposition force on our finger tip.

Situation You are going through a very rough time. You feel so down that you need someone to talk to you send a text message to your friend asking her if she could come over to make you feel better. You friend gives you a call then tells you she will be there in 20 minutes. You are so happy to see her, you give her a big hug. then pour your heart out. After crying to her for a good 30 minutes. she gives some comforting words. You finally say that you feel so much better. Your mend then says. "That's good to know. Now we're done, could we settle my expenses for this - 20 pesos for the phone call, 35 pesos for the tricycle nde going to your place, 20 pesos for all the tissue paper you drew from my tissue pack, and 10 pesos for the time I lost to working productively because had to come here. Thanks." What would be your reaction to your friend after she says this? Fourreaction​

Answers

Answer:

she is your bestfriend so she should always be there for you as long as you are there for them but be like omg im so sorry.

Explanation:

wow tea is pouring

A cat that has a mass of 6 kg climbs to the top of a tree that is 20 m high. How much potential energy does the cat have at the top of the tree?

Have a great day!

Answers

Answer:

1176.798 J

Explanation:

[] Use the following equation:

U = mgh

m - mass

g - gravitational field

h - height

Have a nice day!

     I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather


An airplane initially travels at 12 m/s when passing the "acceleration line." The airplane then
accelerates to 9 m/s2 until reaching its take off velocity of 40.0 m/s. What is the displacement of
the plane during the acceleration?

Answers

The displacement of  the plane during the acceleration is equal to 80.89 meters.

Given the following data:

Initial velocity = 12 m/sFinal velocity = 40 m/sAcceleration = 9 [tex]m/s^2[/tex]

To determine the displacement of  the plane during the acceleration, we would use the third equation of motion;

[tex]V^2 = U^2 + 2aS[/tex]

Where:

V is the final speed.U is the initial speed.a is the acceleration.S is the displacement traveled.

Substituting the given parameters into the formula, we have;

[tex]40^2 =12^2 + 2(9)S\\\\1600=144+18S\\\\18S=1600-144\\\\18S=1456\\\\S=\frac{1456}{18}[/tex]

Displacement, S = 80.89 meters.

Read more: https://brainly.com/question/13086772

Help it’s multiple choice 11 through 15 please!

Answers

1. • Here, force of gravity on the block = 20 N.

• Therefore, the normal force will also be the same, i.e., 20 N [According to Newton's Third Law, on every action, there is an equal and opposite reaction]

• The coefficient

[tex] u_{k} = 0.4[/tex]

• Force of friction =

[tex]u_{k} \times \: normal \: \: \: force \\ = 0.4 \times 20N \\ = 8N[/tex]

• Hence, the force of sliding friction between the block and the ground is 8 N.

• So, it is option c. 8 N

2. The answer is option d. continue in the same direction with no change in speed.

We know, force = mass × acceleration. When force is 0, then acceleration will also be 0 since mass cannot be 0. So, there will be no change in speed.

3. It is option b. force that is required to give a one kilogram object the acceleration of 1 m/s^2.

Newton is the SI unit of force. As mentioned earlier, force = mass × acceleration. The SI unit of mass and acceleration is Kg and m/s^2 respectively.

So, 1 N = 1 Kg × 1 m/s^2.

4. It is d. not zero.

Acceleration is the change in speed. So, if the force is zero, then acceleration will not occur.

5. Force = 2 N

Acceleration of the object A = 2 m/s^2.

Acceleration of the object B = 1 m/s^2.

Therefore, mass of the object A = 2 N ÷ 2 m/s^2 = 1 Kg

And, mass of the object B = 2 N ÷ 1 m/s^2 = 2 Kg

So, the mass of object B is greater than that of object A.

Hence, the answer is option c. Object B has more mass.

Hope you could get an idea from here.

Doubt clarification - use comment section.

A 3 Kg ball at the end of a string is spun in a circle. If the length of the string is 2 m and the velocity of the ball is 6 m/s, what is the centripetal acceleration of the ball? What is the centripetal force on the ball?

Answers

m is 3kg
r is 2m
v is 6m/s

Fc = mv^2 / r
Fc = (3x6^2)/2 =54

a = v^2/r
a = 6^2 /2 = 18

An object is projected into the air with a vertical velocity of 20 feet per second. At what times will the object be on the ground

Answers

Answer:

20 ft/sec / 32 ft/sec^2 = .625     to reach top

2 * .625 = 1.25

It will be on the ground at t = 0 and t = 1.25

You can also solve the equation:

H = 0 = V0 t - 1/2 g t^2

Obviously, at t=0 h = 0

V0 = 1/2 g t    is a solution

t = 20 * 2 / 32 = 1.25 sec

will give brainlyiest what is the main need or want this wave technology meets to efficiently communicate with others to hear and see others in real time to efficiently store and share music with others to speak with and see others who are far away

Answers

Answer: To see objects surrounding more clearly

Explanation:

Identify the class of lever whch is not used for lifting heavy loads but as used for making work faster. Explain your answer. ​

Answers

Answer:

3 class lever .

Explanation:

Third class lever: In the third class lever, the effort is located in between fulcrum and load. Here, effort arm is shorter than the load arm. It cannot lift the heavy load but increases the speed of doing work. ............. can you me as brainlist pls

What ions are produced from acids and bases?

Answers

Answer:

Give person above me brainliest

Explanation:

classroom and draw an approxim object Three forces are acting on an object (Figure 1.32) which is in equilibrium. Determine force A 1200 N Force A 51 39 42.00 1400 N Figure 1.32 Three forces, acting on​

Answers

I’m not good with physics but I’m good with the theory what goes up must come down

how does cells and tissues work together with the brain to do its job

Answers

Cells are grouped together to carry out specific functions. A group of cells that work together form a tissue. Your body has four main types of tissues, as do the bodies of other animals. These tissues make up all structures and contents of your body.

What is the difference between folk dance and ballroom dance

Answers

Answer:

folk dancing is old music and ball room is young dancing

Why aren’t the Appalachian Mountains still as tall as the Himalayas?

Answers

Answer:

mountains are limited in their theoretical height by several processes. First is isostasy: the bigger a mountain gets, the more it weighs down its tectonic plate, so it sinks lower. ... Bottom line: mountains can get taller than Mount Everest in earth gravity, like the Appalachians probably did—but not much taller.

Answer:

It probably won't get any taller, though. From a geological standpoint, the Appalachians haven't seen much growth in quite a while. Since the dawn of the dinosaurs about 225 million years ago, this range has been getting whittled down by weathering forces.

Explanation:

A bullet of mass 20 g has its kinetic energy equal to 400 J. Find the speed of the bullet.

Answers

Answer:

m=20g=0.02kgK.E=400J

[tex]\\ \sf\longmapsto KE=\dfrac{1}{2}mv^2[/tex]

[tex]\\ \sf\longmapsto \dfrac{1}{2}(0.02)v^2=400[/tex]

[tex]\\ \sf\longmapsto 0.01v^2=400[/tex]

[tex]\\ \sf\longmapsto v^2=40000[/tex]

[tex]\\ \sf\longmapsto v=200m/s[/tex]

how do you find average velocity (vaverage) from acceleration (a) and time (t)?

Answers

Answer:

1) Average velocities:

Given the magnitudes of 2 velocity vectors, in different time instants, the average velocity is defined as the difference of the 2 velocity magnitudes, in absolute value, divided by the interval of time occuring between the measurement of the velocity magnitudes.

2) Average acceleration

Given the magnitudes of 2 acceleration vectors, in different time instants, the average acceleration is defined as the difference of the 2 acceleration magnitudes, in absolute value, divided by the interval of time occuring between the measurement of the acceleration magnitudes.

As you see the definitions are pretty similar.

Note: I didn't copy-paste this answers from any other site.

A net force of 79 N causes a mass to accelerate at a rate of 3 m/s2. Determine the mass

Answers

Force= mass x acceleration

79=mass(3)

m=79/3

m=26.3 kg

A car travels 80 km at an avarage speed of 40 km/h. It travels the remaining distance in 3h. What is its dis placement if the average speed of the car is 30 km/h.? And explain

A) 100 km

B)120 km

C)150km

D)180km

Answers

When traveling with average speed 40 km/h, the car would cover a distance of 80 km in time t such that

40 km/h = (80 km) / t   ⇒   t = 2 h

so the total travel time is 2 h + 3 h = 5 h.

Average speed is defined as the total distance traveled divided by the time it took to cover that distance. So if the overall average speed was 30 km/h, then

30 km/h = (80 km + x) / (5 h)   ⇒   x = 70 km

where x is the distance traveled in the last 3 h of the trip.

Then the total displacement of the car is 80 km + 70 km = 150 km.

Other Questions
!!please help me quick!!find the equation of the line.y=__x+__ II. Arrange the scrambled words to form a correct word through its meaning. Write your answer from the given space. 1. TAMARLIKEBITY is a measure of whether a product will appeal to buyer and sell to a price range to generate profit 2. VANONIVETI introducing new ideas, original and creative thinking 3. CENEHAN further improve the quality of the product 4. SSOACCESIER a thing which can be added to something else in order to make it useful, versatile or attractive, 5. RACODETE look more attractive by adding extra items or images on it Two students run a race. Student A is 50 kg and runs at 5 m/s. Student B is 30 kg and runs at 2 m/s. Whichstudent has more Kinetic energy? PLEASE SOMEONE HELP ME OH LORD PLEASE I BEG U Question # 11DropdownWhich team members are core members, and which are support team members? Choose C for core team members, and S for support team members.Physical therapist Physician Dietitian Pharmacist Social Worker Psychologist what is the three-dimensional coordination number of the face-centered cubic arrangement? Help help help help help help Please help! If you do tysm!! who were the"leather stockings"? ok sooo um another post again hahahahabut anyways, to the question.Explain the meaning of the inequality statement in terms of distance from a starting point in a real world setting. 20.2 miles > 17.6 miles I need help ASAP . The Jehan Division of a company manufactures and sells Product A. The current selling priceis $73 per unit. Per-unit costs are as follows:Direct materials $ 5.00Direct labor 6.00Manufacturing overhead:Variable 7.00Fixed 8.00Selling costs:Commissions 1.00Shipping 1.50Fixed 1.00$ 29.50The contribution margin per unit is: $____________CONSIDER THE FOLLOWING QUESTIONS1. A special one-time order to purchase 20,000 units was recently received at a price of $60 per unit. There is enough capacity to fill the order and filling this order will NOT disrupt current operations. If BLUE accepts this order, variable manufacturing costs will be reduced by $5 per unit and variable selling costs (both commission and shipping) will go down by 80%.Is there an opportunity cost to BLUE, yes or no, and WHY?________ (yes or no) Take the greatest possible factor out of the square root. Square root of 80 how much percent of water should we add to sea water to change concentration from 3 to 2 The word fat often carries a negative connotation. Write a story or observation where something fat is celebrated. word count 125 words A burning fire produces ______ energy.A.) kinetic and potential B.) electrical and thermal C.) light and thermal D.) chemical and radiant What were Sons of Liberty?a) A secret group who traveled to England to talk with the King.b) A secret group that found interesting ways to oppose the British.c) A secret group who fought battles against the British without the support of the colonist.d) A secret group who drafted the Declaration of Independence. Find the m, b, and write the equation for the following graph: 5. State one reason as to why weather is important to us? Why did the Stamp Act anger Colonists and what events led to the repeal of the Stamp Act of 1766?