Answer:
V1 = 792.1 ml
Explanation:
The product of pressure and volume is constant when temperature is constant. This relationship is known as Boyle's law.
To answer this, I assume the chlorine gas will behave as a perfect gas. In reality this is not completely true.
P1*V1 = P2*V2
Given:
P1 = 681 mm Hg
V1 = ?
P2 = 992 mm Hg
V2 = 543.8 ml
V1 = ( P2 * V2 ) / P1
V1 = (992 *543.8 ) / 681
V1 = 792.143318649046 ml
V1 = 792.1 ml
Using GRIGNARDS REAGENT convert methane to ethanol
Answer:
J
Explanation:
Gallium chloride is formed by the reaction of 2.25 L of a 1.50 M solution of HCl according to the following equation: 2Ga 6HCl --> 2GaCl3 3H2 Determine the mass of gallium chloride, in grams, produced. Group of answer choices
Answer:
198.56g of GaCl3
Explanation:
We'll begin by calculating the number of mole HCl in 2.25 L of a 1.50 M solution of HCl. This is illustrated below:
Molarity of HCl = 1.50 M
Volume = 2.25 L
Mole of HCl =..?
Molarity = mole /Volume
1.5 = mole /2.25
Cross multiply
Mole = 1.5 x 2.25
Mole of HCl = 3.375 mole
Next, we shall determine the number of mole Gallium chloride, GaCl3 produced from the reaction. This is shown below:
2Ga + 6HCl —> 2GaCl3 + 3H2
From the balanced equation above,
6 moles of HCl reacted to produce 2 moles of GaCl3.
Therefore, 3.375 mole of HCl will react to produce = (3.375 x 2)/6 = 1.125 mole of GaCl3.
Therefore, 1.125 moles of GaCl3 were produced from the reaction.
Next, we shall convert 1.125 mole of GaCl3 to grams. This is illustrated below:
Molar mass of GaCl3 = 70 + (35.5x3) = 176.5g/mol
Mole of GaCl3 = 1.125 mole
Mass of GaCl3 =..?
Mole = mass /Molar mass
1.125 = mass of GaCl3 /176.5
Cross multiply
Mass of GaCl3 = 1.125 x 176.5
Mass of GaCl3 = 198.56g
Therefore, 198.56g of GaCl3 were produced from the reaction.
What is the mass number of an atom with 24 protons and 30 neutrons?
Answer:
54
Explanation:
Mass number = protones + neutrons
Mass number = 24 + 30
Mass number = 54
Convert 120 degrees F to K.
[?]K
Answer:
322
Explanation:
This is easy
Look at the reaction below and state which direction the reaction would shift: A closed container of water and its vapor at equilibrium. Vapor is added to the system.
Water + Energy <=> Vapor
explain
Answer:
According to Le Chatelier's principle, adding additional reactant to a system will shift the equilibrium to the right, towards the side of the products. ... If we add additional product to a system, the equilibrium will shift to the left, in order to produce more reactants.
what is the best course of action if solid material remains in the flask after the heating step of recrystallization
Answer:
filter the hot mixture.
Explanation:
Solid is stayed undissolved since the arrangement is gotten super saturated. On the off chance that solid molecule is available recrysallization won't happen in this way we need expel the solid molecule by filtarion in hot condition itself . Subsequently, arrangement become totally homogenous and recrysallization item will shaped by moderate cooling
Which process is endothermic?a)b)c)d)The evaporation of water from the skin.The burning of candle wax.The oxidation of iron in a chemical hand warmer.The combustion of natural gas in a stove
Answer:
The answer is option a. The evaporation of water from the skin
Explanation:
An endothermic reaction is any synthetic reaction that retains heat from its environment. The ingested energy gives the enactment energy to the reaction to happen.
No new bonds formed, no bonds broken in this example. water molecules go from liquid to vapour (gas ), intermolecular bond exist between polar (-OH) molecules and energy is required to break these bonds during the change from liquid to gas. So, it is endothermic .
Remaining three above examples are exothermic. combustion of gas releases energy(exothermic). burninig of the candle exothermic because the energy released from the oxygen into carbon dioxide and water.oxidation of iron also exothermic
Which of the following is an alkali metal?
A. Lithium (LI)
B. Boron (B)
c. Calcium (Ca)
D. Krypton (Kr)
Answer:
lithium is akali metal
Answer:
lithium is an alkali metal as it lies in group 1st in modern perodic table.
Which example describes a use for gemstones?
fabrics
plastics
drill bits
paper clips
Answer:
Drill bits
Explanation:
Gemstones such as diamonds are used in drill bits because of their hardness.
They are a 10 on the Mohs scale of hardness, which runs from 0 to 10.
Drill bits are produced from gemstones due to their hardness.
What are gemstones?Gemstones are the name given to pieces of minerals that can be cut and polished valuable accessories.
Gemstones such as diamonds are used in drill bits because of their hardness.
Examples of drill bitsBrad Point Drill BitsMasonry Drill BitsRivet Drill BitsSpade Drill BitsThus, drill bits are produced using gemstones.
Learn more about gemstones here: https://brainly.com/question/24448445
PLEASE ANSWER AS SOON AS POSSIBLE REALLY WOULD APPRECIATE IT
Answer:
The answer is option D.
Hope this helps you
Carbon dioxide gas reacts with liquid water to produce aqueous carbonic acid.” Which chemical equation correctly translates this description? CO2 (s) + H2O (g) → H2CO3 (s) CO2 (l) + H2O (l) → H2CO3 (l) CO2 (g) + H2O (g) → H2CO3 (aq) CO2 (g) + H2O (l) → H2CO3 (aq)
Answer: CO2(g)+H2O(I) > H2CO3(Aq)
Explanation:
Got it right?
4Ga + 3S2 ⇒ 2Ga2S3
How many grams of Gallium Sulfide would form if 20.5 moles of Gallium burned?
Answer:
2415.9g (corrected to 1 d.p.)
Explanation:
(Take the atomic mass of Ga=69.7 and S=32.1)
Assuming Ga is the limiting reagent (because the question did not mention the amount of sulphur burnt),
From the balanced equation, the mole ratio of Ga:Ga2S3 = 4: 2 = 2: 1, which means, every 2 moles of Ga burnt, 1 mole of Ga2S3 is produced.
Using this ratio, let y be the no. of moles of Ga2S3 produced,
[tex]\frac{2}{1} =\frac{20.5}{y}[/tex]
y = 20.5 / 2
= 10.25 mol
Since mass = no. of moles x molar mass,
the mass of Ga2S3 produced = 10.25 x (69.7x2 + 32.1x3)
= 2415.9g (corrected to 1 d.p.)
) Which property listed below is NOT that associated with a metallic atomic solid: (a) electrically (b) elastic (c) high melting (d) tough insulating point
Answer:
I'd say elastic
Metallic atomic solids, forming metal objects, can pass electric currents through, need a lot of heat to melt, and since electricity can easily pass through, it's quite tough/impossible to find an insulating point.
Lead can be prepared from galena [lead(II) sulfide] by first heating with oxygen to form lead(II) oxide and sulfur dioxide. Heating the metal oxide with more galena forms the metal and more sulfur dioxide. Write a balanced equation for the overall reaction by adding the balanced equations for the two steps.
Answer:
2 PbS(s) + 1.5 O₂(g) + PbO(s) ⇒ 2 SO₂(g) + 3 Pb(s)
Explanation:
Lead can be prepared from galena [lead(II) sulfide] by first heating with oxygen to form lead(II) oxide and sulfur dioxide. The corresponding chemical equation is:
PbS(s) + 1.5 O₂(g) ⇒ PbO(s) + SO₂(g)
Heating the metal oxide with more galena forms the metal and more sulfur dioxide. The corresponding chemical equation is:
2 PbO(s) + PbS(s) ⇒ 3 Pb(s) + SO₂(g)
We can get the overall reaction by adding both steps and canceling what is repeated on both sides.
2 PbS(s) + 1.5 O₂(g) + 2 PbO(s) ⇒ PbO(s) + 2 SO₂(g) + 3 Pb(s)
2 PbS(s) + 1.5 O₂(g) + PbO(s) ⇒ 2 SO₂(g) + 3 Pb(s)
For the reaction 2 A - Products, the concentration of A is monitored over time. A graph of [A] versus time was found to be linear, with a negative slope. Select the true statement regarding this reaction.
A) The reaction is first order with respect to A.
B) The reaction is second order with respect to A.
C) The rate constant has a negative value.
D) In 2 The reaction has a half-life equal to k.
E) None of these statements is true.
Answer:
none of these statements is true
according to the question E) None of these statements is true.
What is a concentration in chemistry?The concentration of a chemical substance expresses the amount of a substance present in a mixture. There are many different ways to express concentration. Chemists use the term solute to describe the substance of interest and the term solvent to describe the material in which the solute is dissolved
What is concentration in chemistry units?
Quantitative units of concentration include molarity, molality, mass percentage, parts per thousand, parts per million, and parts per billion.
Learn more about concentration here
https://brainly.com/question/24595796
#SPJ2
calculate the molarity of a solution containing 15.2 grams of nacl dissolved in 2.5 l of solution
Answer:
THE MOLARITY OF THE SOLUTION IS 0.1039 MOL/DM3
Explanation:
Molarity is the number of moles of solute in a given solution,
Molarity in mol / dm3 = Molarity in g/dm3 / Molar mass
Mass = 15.2 g
Volume of solution = 2.5 l
Molar mass of NaCl = (23 + 35.5) = 58.5 g/mol
First, we calculate the molarity in g/dm3
Molarity in g/dm3 = mass /volume
= 15.2 g * 1 L / 2.5 L
=6.08 g /dm3
Hence, we will introduce the values and solve for molarity in mol/dm3
Molarity = 6.08 g/dm3/ 58.5 g/mol
Molarity = 0.1039 mol/dm3
The molarity of the solution is 0.1039 mol/dm3
Write a balanced equation for the combustion of liquid methanol in air, assuming H2O(g) as a product.
Answer:
2 CH₃OH + 3 O₂ ⇒ 2 CO₂ + 4 H₂O
Explanation:
Methanol is CH₃OH. Oxygen is O₂. A combustion produces CO₂ and H₂O. Create an equation using this information and balance.
CH₃OH + O₂ ⇒ CO₂ + H₂O
2 CH₃OH + 3 O₂ ⇒ 2 CO₂ + 4 H₂O
The balanced equation for the combustion of liquid methanol in air, assuming H2O(g) as a product is
CH₃OH(l) + O₂(g) → CO₂(g) + H₂O(g)
From the question,
We are to write a balanced equation for the combustion of liquid methanol in air.
The combustion of liquid methanol in air is the reaction between methanol (CH₃OH) and oxygen (O₂). The reaction yields carbon(IV) oxide and water.
Now, for the balanced equation for the combustion of liquid methanol in air
The balanced chemical equation is
CH₃OH(l) + O₂(g) → CO₂(g) + H₂O(g)
Hence, the balanced equation for the combustion of liquid methanol in air, assuming H2O(g) as a product is CH₃OH(l) + O₂(g) → CO₂(g) + H₂O(g)
Learn more here: https://brainly.com/question/2473060
A sample of gas in a cylinder as in the example in Part A has an initial volume of 48.0 L , and you have determined that it contains 1.80 moles of gas. The next day you notice that some of the gas has leaked out. The pressure and temperature remain the same, but the volume has changed to 12.0 L . How many moles of gas (n2) remain in the cylinder
Answer:
0.45 moles
Explanation:
The computation of the number of moles left in the cylinder is shown below:
As we know that
[tex]\frac{n1}{V1} = \frac{n2}{V2}[/tex]
we can say that
[tex]n2 = n1 \times \frac{V2}{V1}[/tex]
where,
n1 = 1.80 moles of gas
V2 = 12.0 L
And, the V1 = 48.0 L
Now placing these values to the above formula
So, the moles of gas in n2 left is
[tex]= 1.80 \times \frac{12.0\ L}{48.0\ L}[/tex]
= 0.45 moles
We simply applied the above formulas so that the n2 moles of gas could arrive
What is a heterogeneous mixture?
Answer:
The type of mixture whose components are seen through our naked eyes is known as heterogeneous mixture. it is a mixture of small constituent parts of substances.
for eg, mixture of sand and sugar.
hope it helps..
A temperature of 41 Fahrenheit is the same as
Answer:
5 degrees Celsius.
Explanation:
Temperature measures the average kinetic energy of particles of the substances. Therefore a temperature of 41 Fahrenheit is the same as 5 degree Celsius
What is temperature?
Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.
Temperature can be measured in degree celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.
We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:
°C={5(°F-32)}÷9
Substituting given values in above equation
°C= {5(41-32)}÷9
°C= 5°C
Therefore a temperature of 41 Fahrenheit is the same as 5 degree Celsius
To know more about temperature, here:
https://brainly.com/question/13694966
#SPJ6
Using the volumes of EDTA solution you just entered and the corresponding dry unknown sample masses entered earlier, calculate the percent mass of calcium carbonate in the unknown sample mixture.
Enter the calculated percent mass of calcium carbonate in the dry unknown sample for each of the 3 acceptable trials.
Be sure to enter your mass percentages to the correct number of significant digits and in the corresponding order that you entered your masses of your dry unknown samples and volumes of your EDTA previously. The dry unknown sample mass you entered for entry #1 below should correspond to the percent mass of calcium carbonate you enter for entry #1 here.
Trial #: Mass (Grams):
#1: 0.015
#2: 0.015
#3: 0.015
Volume (mL)
#1: 16.4
#2: 15.00
#3: 18.70
Molarity of EDTA Solution: 0.0675
Answer:
#1
Explanation:
molarity of EDTA solution 0.0675
no1
10. Which functional group is present in the molecule?
Alcohol
It carries at least one hydroxyl functional group ( i.e -OH ) bound to a saturated carbon atom.
Therefore the functional group present is -OH functional group.
Answer:
Carboxylic acid
Explanation:
Temperature farthest from the
initial temperature (22.5°C)
COMPLETE
RETRY
Answer:
The next part is 8.8
Explanation:
You're gonna subtract 31.3 by 22.5 which is 8.8
You're welcome :)
The value of q-cal is 142.8 J in the reaction of magnesium and hydrochloric acid in a different constant pressure calorimeter with a calorimeter constant of 12.75 J/degrees Celsius.
What is calorimeter?A calorimeter is a device that measures the amount of heat in a chemical or physical process.
To calculate the value of q-cal (heat absorbed or released by the calorimeter), we need to use the following equation:
q = C * ΔT
Where q is the heat absorbed or released by the calorimeter, C is the calorimeter constant, and ΔT is the change in temperature.
In this case, we know that the calorimeter constant is 12.75 J/degrees Celsius, the initial temperature is 22.5 degrees Celsius, and the final temperature is 33.7 degrees Celsius.
Therefore, we can calculate ΔT as:
ΔT = final temperature - initial temperature
ΔT = 33.7°C - 22.5°C
ΔT = 11.2°C
Substituting these values into the equation, we get:
q = C * ΔT
q = 12.75 J/°C * 11.2°C
q = 142.8 J
Therefore, the value of q-cal is 142.8 J.
For more details regarding calorimeter, visit:
https://brainly.com/question/4802333
#SPJ7
Your question seems incomplete, the probable complete question is:
Suppose you perform the reaction of magnesium and hydrochloric acid in a different constant pressure calorimeter with a calorimeter constant of 12.75 J/degrees Celsius. The initial temperature in the calorimeter is 22.5 degrees Celsius and the final temperature after the reaction is 33.7 degrees Celsius. What is the value of q-cal?
What is the maximum number of electrons in the second principal energy level?
02 32 8 18
Answer:
8 electrons
Explanation:
The second principal energy level has two sublevels: 2s and 2p
2s : 2 electrons
2p : 6 electrons (3 sublevels × 2 electrons each = 6 electrons)
It can hold a maximum of 8 electrons.
Hope this helps. :)
Which products are formed when aluminum is added to a silver chlorine solution?
Answer:
Alcl3 and Cl2
Explanation:
the product above will be formed
Answer:
silver (Ag) and aluminum chloride (AlCl₃)
Explanation:
The reaction between aluminum and silver chloride is a single replacement reaction. A single replacement reaction is when one element switches places with another.
Al + 3AgCl ➔︎ 3Ag + AlCl₃
In the reaction, the cations (positively charged ions) switch places. Aluminum (Al) switches places with Silver (Ag). So, the products of the reaction are silver and aluminum chloride.
Hope this helps.
what is the reduction half equation of Fe(s)+ 2 HC2H3O2(aq) → Fe(C2H3O2)2(aq) + H2(g)
Answer:
2 H⁺ + 2e = H₂ ( reduction )
Explanation:
Fe( s ) + 2 CH₃COOH = Fe ( OOCCH₃ ) ₂ + H₂
Fe( s ) = Fe⁺² + 2e ( oxidation )
2 H⁺ + 2e = H₂ ( reduction )
conductors such as metal are materials that have a
Answer:
Conductors allow a flow of current or a charge of flow
I hope this helped! Please rate it the brainlist if possible, thanks
4. What are the potential sources of error that might cause disagreement between the activity series' prediction of reactions and your observations of reactions
Answer:
1. Not to have enough salt water on the foil
2.not cleaning the foil well to remove interfering materials
Electronegativity is a concept that is useful along with other concepts in Group of answer choices predicting the polarity of a bond formulating a statement of the octet rule determining the charge of a negative ion deciding how many electrons are involved in a bond
Answer:
Predicting the polarity of a bond is the correct answer to this question.
Explanation:
Polar-covalent bonded substances have atoms that are distributed unequally among the central atom. The polarity of this bond is essentially determined by the bound atoms uniformly electronegativities.
To evaluate the polarity using numerical means of a covalent bond, if the result is between 0.4 and 1.7, then the bond is usually polar covalent.
Fe(s)+ 2 HC2H3O2(aq) → Fe(C2H3O2)2(aq) + H2(g) Which substance is reduced and which subject is oxidized?
Answer:
- Iron is oxidized from 0 to +2.
- Hydrogen is reduced from +1 to 0.
Explanation:
Hello,
In this case, for the given reaction, we must first indicate the oxidation state of each element (notice that HC2H3O is acetic acid)
[tex]Fe ^0(s)+ 2 H^+(C_2H_3O_2)^-(aq) \rightarrow Fe^{2+}(C_2H_3O_2)_2^-(aq) + H_2^0(g)[/tex]
Thereby, notcing that iron is alone at the beginning, it has zero as its oxidation state, but once the reaction is undergone, it changes to +2, moreover, the displaced hydrogen in the acetic acid is with +1 but after the chemical reaction it becomes alone for which its oxidation state is 0, thereby, we find that:
- Iron is oxidized from 0 to +2.
- Hydrogen is reduced from +1 to 0.
Best regards,