Answer:
The Enthalpy of neutralization
Explanation:
The reaction of a base (KOH) with an acid (HCl) produce water and its salt (KCl) is called Neutralization Reaction.
This neutralization releases 57kJ/mol.
As the type of enthalpy is due the type of reaction. This enthalpy is:
The Enthalpy of neutralizationThe Ksp of silver bromide at 25°C (298 K) is 5.0 x 10-13. Write the solubility expression hydrogen oxygen for this compound and show the dissociation equation for AgBr.
3. Bacteria communicate with each other through electronic pulses.
O True
O False
Answer:
All in All, All in All.
Explanation:
5. A 23.9 g piece of metal heated to 97.8 °C is placed in 52.4 g water at 21.9 °C. After the
metal is added, the temperature of the water rises to 29.9 °C. Calculate the specific heat of the
metal. Express your answer in the units of cal/g°C.
Answer:
Explanation:
Here we'll use our formula for specific heat, Q=mcΔT.
Q= Heat (Joules), m=mass (g), c=specific heat
ΔT= (final temperature - initial temperature)
When we add a heated piece of metal in water at a lower temperature, the metal will lose heat and the water will absorb that heat. Over time they will eventually reach an equilibrium, here we have it at 21.9 C. If you recall in thermodynamics, , when we lose heat it is exothermic and the values of exothermic reactions are negative, and the values of endothermic reactions are positive. So we can say the heat of the metal is exothermic and releasing heat into the water until they reach equilibrium, thus they are equal. Keeping in mind Q= heat,
-Q metal = Q water.
We can expand this equation to -mcΔT= mcΔT.
Our equation reflects what is happening to the metal and the water.
Before we start, it might be helpful to remember that the
c=specific heat of water= 4.186 J/g C
Let's plug in what we know and solve for c=specific heat of metal. I'll start with the left side then go to the right side.
-(23.9g)(c)(29.9-97.8) = (52.4g)(4.184)(29.9 - 21.9)
-(23.9gc)(29.9-97.8) = (52.4g)(4.184)(29.9 - 21.9)
-(23.9g)(c)(-67.9) = (52.4g)(4.184)(29.9 - 21.9)
1623c = (52.4g)(4.184)(29.9 - 21.9)
1623c = (52.4g)(4.184)(8)
1623c = 1754
c= [tex]\frac{1754}{1623}[/tex]
c= 1.08
This means it takes less heat to raise the temperature of the piece of metal ( in comparison to the water, which require more ).
Λλ(Lamda) Represents what??
Answer:
λ Represents:-
one wavelength of electromagnetic radiationthe decay constant in radioactivityfunction expressions in the lambda calculusa general eigenvalue in linear algebrathe expected number of occurrences in a Poisson distribution in probabilitythe arrival rate in queueing theorythe failure rate in reliability engineeringthe Lagrange multiplier in mathematical optimization, known as the shadow price in economicsthe Lebesgue measure denotes the volume or measure of a Lebesgue measurable setlongitude in geodesylinear densityecliptic longitude in astronomythe Liouville function in number theorythe Carmichael function in number theorythe empty string in formal grammara formal system in mathematical logicthermal conductivitythe Lorentz transformation-TheUnknownScientist
Excessive use of chemical fertilizer causes chemical pollution.how?
Answer:
Chemical fertilizers contain various chemicals that cause harm to soil and water.
Explanation:
Chemical fertilizers contain various chemicals such as phosphates, nitrates which can cause water pollution. Eutrophication caused by the environmental nitrogen and phosphorous that causes rich minerals and chemicals in the water.
These can cause excessive growth of the algae and phytoplankton that will cause depletion of the oxygen from the water body and organisms will die due to this.
how many liters of N2 gas is needed to produce 500 L NH3?
What is the empirical formula for a compound if a 2.50g sample contains 0.900g of calcium and 1.60g
of chlorine? (3pts]
Answer:
CaCl₂
Explanation:
First we convert the given masses of elements into moles, using their respective molar masses:
0.900 g Ca ÷ 40 g/mol = 0.0225 mol Ca1.60 g Cl ÷ 35.45 g/mol = 0.045 mol ClNow we divide those numbers of moles by the lowest value among them:
0.0225 mol Ca / 0.0225 mol = 10.045 mol Cl / 0.0225 mol = 2Meaning the empirical formula for the compound is CaCl₂.
1. Identify the seven diatomic elements and explain why they are different from the rest of the elements
Answer:
hydrogen, nitrogen, oxygen, flourine, chlorine, iodine, bromine
Explanation:
they are very reactive and thus cannot exist as monoatomic elements
The seven diatomic elements are;
HydrogenOxygenChlorineFlourineIodineBromineNitrogenAccording to the question;
We are required to identify the seven diatomic elements and explain why they are different from the rest of the elements.The diatomic elements as listed above are different from the rest of the elements in that they exist as molecules.
This is as a result of the high electron affinity of these elements. Consequently, they form molecules with atoms of themselves.
Read more:
https://brainly.com/question/11446176
Why is a sandy shore hot on a summer day?
A. The sand is heated through thermal conduction,
B. The sand is chemically heated.
C. The sand is heated through radiation.
D. The sand is heated through convection.
Answer:
C. the sand is heated through radiation
Explanation:
20 grams of hydrogen fluoride gas, HF, is dissolved in 0.5 liters of solution. Determine the molarity (M).
Answer:
40
Explanation:
M = n/v hope this helps :b
A 37.2 g sample of copper at 99.8 °C is carefully placed into an insulated container containing 188 g of water at 18.5 °C. Calculate the final temperature when thermal equilibrium is reached. Assume there is no energy transferred to or from the container. Specific heat capacities: Cu = 0.385 J g-1 °C-1 H2O = 4.184 J g-1 °C-1
Answer:
T₂ = 19.95°C
Explanation:
From the law of conservation of energy:
[tex]Heat\ Lost\ by\ Copper = Heat\ Gained\ by\ Water\\m_cC_c\Delta T_c = m_wC_w\Delta T_w[/tex]
where,
mc = mass of copper = 37.2 g
Cc = specific heat of copper = 0.385 J/g.°C
mw = mass of water = 188 g
Cw = specific heat of water = 4.184 J/g.°C
ΔTc = Change in temperature of copper = 99.8°C - T₂
ΔTw = Change in temperature of water = T₂ - 18.5°C
T₂ = Final Temperature at Equilibrium = ?
Therefore,
[tex](37.2\ g)(0.385\ J/g.^oC)(99.8\ ^oC-T_2)=(188\ g)(4.184\ J/g.^oC)(T_2-18.5\ ^oC)\\99.8\ ^oC-T_2 = \frac{(188\ g)(4.184\ J/g.^oC)}{(37.2\ g)(0.385\ J/g.^oC)}(T_2-18.5\ ^oC)\\\\99.8\ ^oC-T_2 = (54.92) (T_2-18.5\ ^oC)\\54.92T_2+T_2 = 99.8\ ^oC + 1016.02\ ^oC\\\\T_2 = \frac{1115.82\ ^oC}{55.92}[/tex]
T₂ = 19.95°C
What type(s) of intermolecular forces are expected between SO3 molecules? ball & stick -+labels Indicate with a Y (yes) or an N (no) which apply. dipole forces ___ induced dipole forces ___ hydrogen bonding ___
Answer:
dipole forces Y
induced dipole forces N
hydrogen bonding N
Explanation:
Oxygen is highly electronegative than sulphur, hence SO3 is polar
what is a factor of a solution
Answer:
Normality factor is defined as the ratio of observed wt. of solute to the theoretical wt. of the solute required to prepare a solution of desired normality. ... The principle states that, “the product of volume and concentration factor of the solution at any dilution is constant provided mass of the solution is constant.”
Explanation:
In the formula H2SO4, what is the 4 called?
Answer:
Well 4 in H2SO4 would be called Sulfuric Acid
Explanation:
The Reason why its called by its name because the form lua is called this its because its a colorless Acid that burns it also has dissolving metals and other stuff inside of it. it has another name called oil of vitriol. hopefully this helps ^^!
Real world scenario: cancer prevention
Answer:
for skin cancer use sunscreen but for cancer that's most common eat healthy and take vitamins as much as you can.
Explanation:
how to get a girl
need to get a girl
Answer:
pretty easy
Explanation:
step 1: Approach her
step 2: Ask her for something (make it look like you're lost even when you aren't)
step 3: engage in a conversation with her
step 4: you talk for hours and she give you her number
step 5: you wake up from your dream
step 6: wait you woke up
step 7: go back to dreaming again.
Answer: Girls are tough. Girls are....attitude, we all know its true.
Explanation
Best thing to start is shush when shes talking.
At 47c a gas has a pressure of 140kpa. The gas is cooled until the pressure decreases to 105kpa. If the volume remains constant, what will the final temperature be in kelvin’s? In degrees Celsius
Answer:
The final temperature is equal to 240 K or -33.15°C
Explanation:
Given that,
Initial temperature of the gas, T₁ = 47°C = 320 K
Initial pressure, P₁ = 140 kpa
Final pressure, P₂ = 105 kpa
We need to find the final temperature if the volume remains constant. The relation between temperature and pressure is given by :
[tex]P\propto T[/tex]
or
[tex]\dfrac{P_1}{P_2}=\dfrac{T_1}{T_2}\\\\T_2=\dfrac{P_2T_1}{P_1}\\\\T_2=\dfrac{105\times 320}{140}\\\\T_2=240\ K\\\\T_2=-33.15^{\circ} C[/tex]
So, the final temperature is equal to 240 K or -33.15°C.
Genes influence an organism's traits by coding for:
A
Cells
Answer:
First, the protein may be a structural protein, contributing to the physical properties of cells or organisms. ... Second, the protein may be an enzyme that catalyzes one of the chemical reactions of the cell. Therefore, by coding for proteins, genes determine two important facets of biological structure and function.
Explanation:
i think it will help you
The formula for the pH of a solution of hydronium ions is given by the logarithmic equation pH= -log[h3o^+], where [H3o^+] is the hydronium ion concentration. Find the pH of a certain agricultural product with the hydronium ion concentration of 4.7x10^-4
The pH is =?
Answer:
pH = 3.3
Explanation:
Step 1: Given data
Concentration of hydronium ions in the agricultural product ([H₃O⁺]): 4.7 × 10⁻⁴ M
Step 2: Calculate the pH of the agricultural product
We will use the definition of pH.
pH = -log [H₃O⁺]
pH = -log 4.7 × 10⁻⁴
pH = 3.3
Since the pH < 7, the agricultural product is acidic.
HELP HELP HELP!!!!!!!!!!
the answer will there for be ironic
All solutes will dissolve at some point.
O True
O False
Answer:
False
Explanation:
Describe the effects lenses have on light and their possible technological applications.
Answer:
lenses is used to refract light inward or outward
there are two type of lenses. Concave and convex lense
Convex lense converge ray of light
Concave lense diverge ray of light
useful application =:
=> camera
=> flashlight
=> lasers
=> Binoculars and Telescope
hope it helps
Answer:
Explanation:
Lenses are made of glass or other transparent materials for light. They are optically dense so light slows down on entering it. It is called refraction which bends the light on entering and leaving the lenses.
Refraction by lenses can be used for all kinds of optical applications, e.g. camera, telescope, magnifying glasses, solar heating.
What happens when earth rotates on its axis and how long take?
Answer:
We get Day and Night... It takes 24 hours for the earth to rotate on its axis
Soil comes in different colors.
Answer: yes they come in different colors.
Explanation:
Most shades of soil is mostly black,brown,red,gray,and white the color of soil and other properties including texture, structure, and consistency are used to distinguish and identify soil.
You have a cold gas of atoms, and you observe that if you shine light consisting of photons with energy 10 eV through the gas, some free electrons are observed, implying that a photon of this energy is able to ionize an atom in the gas. (a) If you find that the emitted electrons from the gas have a kinetic energy of 1 eV, what is the ionization energy of the cold atom
Answer:
Ionization Energy = 9 eV
Explanation:
If we apply the law of conservation of energy to the given situation, we will get the following equation:
[tex]Energy\ of\ Photon = Ionization\ Energy + Kinetic\ Energy\ of\ Electron\\[/tex]
where,
Energy of Photon = 10 eV
Ionization Energy = ?
Kinetic Energy of Electrons = 1 eV
Therefore,
[tex]10\ eV = Ionization\ Energy + 1\ eV\\Ionization\ Energy = 10\ eV - 1\ eV[/tex]
Ionization Energy = 9 eV
The number of atoms in a 158.4 g sample of CO2 gas at STP is:
1.277 x 1025 atoms
2.167 x 1024 atoms
6.502 x 1024 atoms
6.651 x 1024 atoms
Answer:
6.502 x 10²⁴ atoms.
Explanation:
First we convert 158.4 g of CO₂ into moles, using carbon dioxide's molar mass:
158.4 g ÷ 44 g/mol = 3.6 mol CO₂Then we calculate how many CO₂ molecules are there in 3.6 moles, using Avogadro's number:
3.6 mol CO₂ * 6.023x10²³ molecules/mol = 2.168x10²⁴ CO₂ moleculesAs there are 3 atoms per CO₂ molecule, we triple the number of CO₂ molecules in order to get the answer:
2.168x10²⁴ CO₂ molecules * 3 = 6.504x10²⁴ atomsThe closest answer is the third option, 6.502 x 10²⁴ atoms.
State the methods of preparing salts
Answer:
Preparation of Salts by The Action of An Acid Upon a Metal.
Preparation of Salts by Double Decomposition.
Preparation of Salts by Neutralization.
Using A Soluble Base (alkali)
(b). Using An Insoluble Base.
Preparation of Salts by the Action of An Acid on The Trioxocarbonate (IV) of A Metal.
Explanation:
t-Butyl alcohol was produced by the liquid-phase hydration (using water, W) of isobutene (I) over an Amberlyst-15 catalyst.
a. True
b. False
Answer:
True
Explanation:
This is because, The hydroboration oxidation of an alkene which is isobutene in the presence of a catalyst will result to alcohol as the product . Therefore, the OH group will attach or link itself to the carbon which is less obstructed. Thus this reaction is in accordance to Anti-Markownikoff's rule.
So isobutene on hydroboration oxidation will produce ter isobutyl alcohol.
advantages
of corrosion
Answer:
Protection : Surface corrosion forms an oxide layer which further protects the inner metal form corrosion
.
Corrosion prevents corrosion : Some metals like zinc are used as sacrificial anodes to prevent corrosion to other metal.
Galvanic corrosion : The principle on which primary batteries work.
If there are 1.55 x 1024 molecules of hydrogen peroxide (H2O2), what is the mass of the
sample?
Answer:
87.54 g of H₂O₂
Explanation:
From the question given above, the following data were obtained:
Number of molecules = 1.55×10²⁴ molecules
Mass of H₂O₂ =.?
From Avogadro's hypothesis,
6.02×10²³ molecules = 1 mole of H₂O₂
Next, we shall determine the mass of 1 mole of H₂O₂. This can be obtained as follow:
1 mole of H₂O₂ = (2×1) + (2×16)
= 2 + 32
= 34 g
Thus,
6.02×10²³ molecules = 34 g of H₂O₂
Finally, we shall determine mass of H₂O₂ that contains 1.55×10²⁴ molecules. This can be obtained as follow:
6.02×10²³ molecules = 34 g of H₂O₂
Therefore,
1.55×10²⁴ molecules
= (1.55×10²⁴ × 34)/6.02×10²³
1.55×10²⁴ molecules = 87.54 g of H₂O₂
Thus, 87.54 g of H₂O₂ contains 1.55×10²⁴ molecules.