Solve the equation and in the answer sheet write down the sum of
the roots of the equation.
Solve the equation of the equation. 5x-2 x²+3x-1 3 4 = -1 and in the answer sheet write down the sum of the roots

The F-test is used to determine if there is a

significant variation

between the

sample means

when comparing two or more groups.

A geologist is conducting a study on three types of rocks to measure their weight and comparing the similarity between the means.

She collected a sample of 92 rocks from all types.

The total sum of squares (TSS) is the variance between each observation in the entire data set and the data set's overall mean.

When the TSS is partitioned into two components, it gives the total variance, which is the sum of the

variance

between the sample means (SST) and the variance within the sample (SSE).

The F-test is calculated as follows:

F =

variance between sample means

/ variance within the sample.

In this scenario, the SST is 231 and the df between is 2 (the number of groups -1).

To find the MS between, divide the SST by the degrees of freedom between:

MS between = 231 / 2

= 115.5.

SSE is 37, and the degrees of freedom within are 89 (the sample size minus the number of groups):

MS within = 37 / 89

= 0.416.

The FF Test Statistic is F = MS between / MS within

=115.5 / 0.416

= 277.644.

The F-distribution with 2 and 89 degrees of freedom has a probability of less than 0.001 of having an F-value as extreme or more than the calculated value.

As a result, there is enough evidence to reject the null

hypothesis

that there is no significant difference between the sample means.

We can conclude that the mean weight of rocks in at least one of the types varies significantly from the mean weight of rocks in at least one other type.

The FF Test Statistic is F = 277.644.

There is enough evidence to reject the null hypothesis that there is no significant difference between the sample means.

We can conclude that the mean weight of rocks in at least one of the types varies significantly from the mean weight of rocks in at least one other type.

To know more about

hypothesis

visit:

brainly.com/question/32562440

#SPJ11

The value of the given double integral is -1/32e^-(4ln(6)+8ln(9)) + 1/32e^-(4ln(6)) + 1/16.

To find the value of the given double integral, we need to evaluate it using the limits of integration provided. The given integral is ∫₀^(ln(6)) ∫₀^(ln(9)) e^-(4x+8y) dy dx.

To evaluate this double integral, we can start by integrating with respect to y first, and then with respect to x. ∫₀^(ln(6)) ∫₀^(ln(9)) e^-(4x+8y) dy dx = ∫₀^(ln(6)) [-1/8e^-(4x+8y)] from 0 to ln(9) dx.

Next, we substitute the limits of integration into the integral:

= ∫₀^(ln(6)) [-1/8e^-(4x+8ln(9))] - [-1/8e^-(4x)] dx.

Simplifying further:

= ∫₀^(ln(6)) [-1/8e^-(4x+8ln(9)) + 1/8e^-(4x)] dx.

Now, we can integrate with respect to x:

= [-1/32e^-(4x+8ln(9)) + 1/32e^-(4x)] from 0 to ln(6).

Substituting the limits of integration:

= [-1/32e^-(4ln(6)+8ln(9)) + 1/32e^-(4ln(6))] - [-1/32e^0 + 1/32e^0].

Simplifying further:

= [-1/32e^-(4ln(6)+8ln(9)) + 1/32e^-(4ln(6))] - [-1/32 + 1/32].

= -1/32e^-(4ln(6)+8ln(9)) + 1/32e^-(4ln(6)) + 1/16.

Therefore, the value of the given double integral is -1/32e^-(4ln(6)+8ln(9)) + 1/32e^-(4ln(6)) + 1/16.

To know more about value click here

brainly.com/question/30760879

#SPJ11

To find a surface parameterization of the plane passing through the given points (4,-3,7), (-5,6,2), and (2,-8,-4), we can use the concept of linear interpolation.

We can define two vectors, v ₁ and v ₂, which connect the first point to the second and third points, respectively. Then, we can parameterize the plane by taking a linear combination of these two vectors.

Let v ₁ = (-5,6,2) - (4,-3,7) = (-9,9,-5) and v ₂ = (2,-8,-4) - (4,-3,7) = (-2,-5,-11). We can define the parameterized surface as s(u, v) = (4,-3,7) + uv ₁ + vv ₂, where u and v range over the interval [0, 1].

By substituting the values of u and v into the expression, we can obtain different points on the plane. This parameterization represents a plane passing through the three given points and can be used to generate additional points on the plane by varying the values of u and v.

Learn more about parametrized plane here: brainly.com/question/15269088
#SPJ11

The length of the helix through three periods is 6π × [tex]\sqrt{85}[/tex].

The helix is represented by the vector-valued function r(t) = (3 sin(2t), -3cos(2t), 7t), where t is the parameter.

To find the length of the helix through three periods, we need to integrate the magnitude of the derivative of r(t) over the desired interval.

The magnitude of the derivative of r(t) is given by

||r'(t)|| = [tex]\sqrt{(dx/dt)^2 + (dy/dt)^2 + (dz/dt)^2}[/tex]

where dx/dt, dy/dt, and dz/dt are the derivatives of each component of r(t) with respect to t.

Differentiating each component of r(t) gives us:

dx/dt = 6cos(2t)

dy/dt = 6sin(2t)

dz/dt = 7

Substituting these derivatives into the formula for the magnitude of the derivative, we have:

||r'(t)|| = [tex]\sqrt{(6cos(2t))^2 + (6sin(2t))^2 + 7^2}[/tex]

[tex]= \sqrt{(36cos^2(2t) + 36sin^2(2t) + 49)}\\ = \sqrt{(36(cos^2(2t) + sin^2(2t)) + 49)}\\ = \sqrt{(36 + 49)}[/tex]

=  [tex]\sqrt{85}[/tex]

To find the length of the helix through three periods, we integrate ||r'(t)|| from t = 0 to t = 6π (three periods):

Length = ∫(0 to 6π) ||r'(t)|| dt

= ∫(0 to 6π)  [tex]\sqrt{85}[/tex]  dt

=  [tex]\sqrt{85}[/tex]  × ∫(0 to 6π) dt

=  [tex]\sqrt{85}[/tex]  × [t] (0 to 6π)

=  [tex]\sqrt{85}[/tex]  × (6π - 0)

= 6π × [tex]\sqrt{85}[/tex]

Therefore, the length of the helix through three periods is 6π × [tex]\sqrt{85}[/tex].

Learn more about derivative here:

https://brainly.com/question/30401596

#SPJ11

The equation f(x) = (5x-1)/(x+2) has a vertical asymptote at x = -2.

In order to find the vertical asymptote of the function f(x) = (5x-1)/(x+2), we need to determine the limit of the function as x approaches the value at which the denominator becomes zero. In this case, the denominator is (x+2), which will equal zero when x = -2.

To find the limit, we substitute -2 into the function:

lim(x→-2) (5x-1)/(x+2)

We evaluate the limit using direct substitution:

lim(x→-2) (5(-2)-1)/(-2+2)

lim(x→-2) (-10-1)/(0)

Since the denominator is zero, the function becomes undefined at x = -2. This indicates the presence of a vertical asymptote at x = -2. As x approaches -2 from the left or right, the function approaches negative or positive infinity, respectively.

Learn more about Vertical asymptotes

brainly.com/question/29260395

#SPJ11

The odds ratio for smokers who drink alcohol against non-smokers who drink alcohol ≈ 3.89.

The given contingency table below can be used to determine the odds ratio for smokers who drink alcohol against non-smokers who drink alcohol:

Drink Alcohol  Do Not Drink Alcohol  Total Smokers  

        108                           11                             130

Non-smokers  317, 114,  420

Total 425, 125, 550

The probability that an event will occur is the fraction of times you expect to see that event in many trials.

Probabilities always range between 0 and 1. The odds are defined as the probability that the event will occur divided by the probability that the event will not occur.

We are given two categories (smokers and non-smokers) and within these categories, we have to calculate the odds ratio of the event "drinking alcohol".

Therefore, we can calculate the odds ratio for smokers who drink alcohol against non-smokers who drink alcohol by using the formula below:

odds ratio = (ad/bc) = (108/11)/(317/114)

= (108/11)*(114/317) ≈ 3.89

As a result, the odds ratio between alcohol consumption by smokers and non-smokers is 3.89.

To learn more about odds ratio refer :

https://brainly.com/question/31586619

#SPJ11

Using the given probability distribution f(x) = 12 for the random variable X with values x = 1, 2, 3, we calculated the corresponding values for x, f(x), x²√(G), x²f(x), and ∑²-1(x-4)f(x). The values obtained are summarized in the table below.

To find the values x, f(x), x²√(G), x²f(x), and ∑²-1(x-4)f(x) given the probability distribution f(x) = 12 for a random variable X that can take the values x = 1, 2, 3, we can substitute each value of x into the corresponding expression.

Let's calculate each value:

For x = 1:

f(1) = 12

1²√(G) = 1²√(G) = 1√(G)

1²f(1) = 1² * 12 = 12

∑²-1(1-4)f(1) = ∑²-1(-3) * 12 = -2 * 12 = -24

For x = 2:

f(2) = 12

2²√(G) = 2²√(G) = 2√(G)

2²f(2) = 2² * 12 = 48

∑²-1(2-4)f(2) = ∑²-1(-2) * 12 = -1 * 12 = -12

For x = 3:

f(3) = 12

3²√(G) = 3²√(G) = 3√(G)

3²f(3) = 3² * 12 = 108

∑²-1(3-4)f(3) = ∑²-1(-1) * 12 = 0 * 12 = 0

Therefore, the values are:

x | f(x) | x²√(G) | x²f(x) | ∑²-1(x-4)f(x)

1 | 12   | 1√(G)    | 12       | -24

2 | 12   | 2√(G)    | 48       | -12

3 | 12   | 3√(G)    | 108      | 0

Using the given probability distribution f(x) = 12 for the random variable X with values x = 1, 2, 3, we calculated the corresponding values for x, f(x), x²√(G), x²f(x), and ∑²-1(x-4)f(x). The values obtained are summarized in the table above.

Learn more about ”random variable ” here:

brainly.com/question/30789758

#SPJ11

The first 8 terms of the piecewise sequence is {3, -4, 9, -6, 15, -8, 21, -10}.

Given a sequence an={(-2)n-2,

                                if n is even {(3)n-1 if n is odd.

We need to write the first 8 terms of the given sequence.

So, we know that if we plug in an even number for n in the formula

         an={(-2)n-2

we get a term of the sequence and if we plug in an odd number for n in the formula

                             an={(3)n-1

we get a term of the sequence.

Here, the first 8 terms of the sequence are,

a1= 3

a2= -4

a3= 9

a4= -6

a5= 15

a6= -8

a7= 21

a8= -10

Therefore, the first 8 terms of the piecewise sequence is {3, -4, 9, -6, 15, -8, 21, -10}.

Thus, the required answer is {3, -4, 9, -6, 15, -8, 21, -10}.

To know more about piecewise sequence, visit:

https://brainly.com/question/28225631

#SPJ11

The situations deal with (a) sample (b) sample in the analysis

From the question, we have the following parameters that can be used in our computation:

The statements

Next, we analyse each statement

A) 12% of 2012 Dodge Ram Trucks had a faulty ignition system

This deals with a sample because the 12% of the dodge ram trucks represent a fraction of the total population

B) 17% of puppies born in the UK are never registered

This deals with a sample because the 17% of the puppies born in the UK represent a fraction of the total population

Read more about sample and population at

https://brainly.com/question/7301139

#SPJ4

Based on the given answer choices, the magnitude of the resultant vector is 30 cm (option c) and the direction is 60 degrees (option d).

To solve this question, you need to add the two given vectors.

Start by drawing the two vectors on a coordinate system, ensuring they are not parallel or perpendicular to each other.

Add the vectors by placing the tail of the second vector at the head of the first vector.

Draw the resultant vector from the tail of the first vector to the head of the second vector.

Measure the magnitude of the resultant vector, which is the length of the line segment representing the vector.

Determine the direction of the resultant vector using an angle measurement.

To know more about vector,

https://brainly.com/question/30491212

#SPJ11

(a) The probability of the flight being exactly 80% full is P(X = 8) = (11 choose 8) * (0.9)^8 * (0.1)^3. (b) The probability that there are enough seats for every passenger who shows up to get a seat on the plane is P(X ≤ 10) where X follows a binomial distribution with parameters n = 11 and p = 0.9. (c) The probability that there will be at least one empty seat (i.e., the flight is not full) is 1 - P(X = 10). (d) The probability that you and your partner will get a seat on the flight is P(Y ≥ 2) where Y follows a binomial distribution with parameters n = 10 and p = 0.9. (e) The probability of at most two passengers not showing up for the flight is P(Z ≤ 2) where Z follows a binomial distribution with parameters n = 11 and p = 0.1.

(a) The probability of the flight being exactly 80% full can be calculated using the binomial distribution. Let X be the number of passengers who show up for the flight. The probability of the flight being exactly 80% full is P(X = 8) = (11 choose 8) * (0.9)^8 * (0.1)^3.

(b) The probability that there are enough seats for every passenger who shows up to get a seat on the plane is the probability that the number of passengers who show up (X) is less than or equal to the number of seats available (10). This can be calculated as P(X ≤ 10) = P(X = 0) + P(X = 1) + ... + P(X = 10).

(c) The probability that there will be at least one empty seat (i.e., the flight is not full) is 1 minus the probability that the flight is full. This can be calculated as P(at least one empty seat) = 1 - P(X = 10).

(d) The probability that you and your partner will get a seat on the flight can be calculated using the binomial distribution. Let Y be the number of seats available after accounting for the passengers who have already purchased tickets. The probability that both of you get a seat is P(Y ≥ 2) = P(Y = 2) + P(Y = 3) + ... + P(Y = 10).

(e) The probability of at most two passengers not showing up for the flight can be calculated using the binomial distribution. Let Z be the number of passengers who do not show up for the flight. The probability of at most two passengers not showing up is P(Z ≤ 2) = P(Z = 0) + P(Z = 1) + P(Z = 2).

To know more about probability,

https://brainly.com/question/31266010

#SPJ11

The best significance test that would be most appropriate to use with the given example is: A. t-test.

A t-test refers to a type of statistical test that is used  to quantify the means of two groups. From the above question, the intent is to know whether women read more advertisements than men do. So, we have two groups to compare.

There is the group for women and the group for men. We will find the average number of women who read advertisements and the average number of men who read advertisements in newspapers and then compare the two groups.

Learn more about the t-test here:

https://brainly.com/question/6589776

#SPJ4

Proportion of scrapped cans is calculated by finding the area under the normal curve outside the range of 365 cc to 375 cc. Specifications for 96% of cans is determined using z-scores and symmetric around the mean.

To calculate the proportion of scrapped cans, we need to find the area under the normal curve outside the range of 365 cc to 375 cc. This involves calculating the z-scores for both limits, finding the corresponding cumulative probabilities using a standard normal distribution table or calculator, and subtracting the two probabilities.

To determine the specifications that include 96% of all cans, we can use z-scores. We need to find the z-score that corresponds to the upper tail probability of 0.02 (since 1 - 0.96 = 0.04). Using the z-score, we can calculate the corresponding fill volume values by multiplying it with the standard deviation and adding or subtracting it from the mean.

To find the value at which the mean should be set so that 99% of all cans exceed that value, we can use the z-score corresponding to the upper tail probability of 0.01 (since 1 - 0.99 = 0.01). Using the z-score, we can calculate the desired fill volume value by multiplying it with the standard deviation and adding it to the current mean.

In conclusion, by applying the concepts of normal distribution, z-scores, and probabilities, we can determine the proportion of scrapped cans, specify ranges that include a certain percentage of cans, and set the mean value to achieve a desired proportion of cans exceeding a certain threshold.

Learn more about z-scores here:

https://brainly.com/question/31871890

#SPJ11

The work done by the force field F=2x²y,-2x²-y in moving an object y=x² from (-1,1) to (1,1) is given as (√5/4) - (3√2/4) + (5/8) ln 5 - (5/8) ln 17.

Given the force field F=2x²y,-2x²-y and the object y=x² is being moved from the point (-1,1) to (1,1).We can calculate the work done by the force field by evaluating the line integral of the force field along the given curve, i.e., W = ∫CF . drThe curve is given as y=x² from (-1,1) to (1,1).To find the work done, we need to find the unit tangent vector to the given curve. Hence, we can find the tangent vector by differentiating the curve. That is, r(t) = , r'(t) = <1,2t>.Therefore, the unit tangent vector is given as, T(t) = r'(t)/|r'(t)| => T(t) = <1,2t>/√(1+4t²).Now, we need to evaluate the line integral by substituting the values in the formula for the work done.So, W = ∫CF . dr= ∫CF . T(t) * |r'(t)| dt= ∫CF . T(t) * |r'(t)| dt= ∫CF . <2t²-2t²,2t-t²> * <1,2t>/√(1+4t²) dt= ∫CF . <0,2t-t³>/√(1+4t²) dt= ∫CF . <0,2t/√(1+4t²)> dt - ∫CF . <0,t³/√(1+4t²)> dtUsing the substitution u = 1+4t², du/dt = 8t, the integral can be evaluated as follows,= ∫(5-1) . <0,2/√u> (du/8) - ∫(1-5) . <0,u/2> (du/4)= (√5/4) - (3√2/4) + (5/8) ln 5 - (5/8) ln 17

Thus, the work done by the force field F=2x²y,-2x²-y in moving an object y=x² from (-1,1) to (1,1) is given as (√5/4) - (3√2/4) + (5/8) ln 5 - (5/8) ln 17.

To know more about force field Visit :

brainly.com/question/13488023

#SPJ11

The equations can be solved with the limits and the truth table.

Now let's solve both parts one by one.

Part (a)Solution:

Given: R = (1-12)

To solve this, we must first write the table for the given R. By using this table, we can easily find the answers for the above-mentioned equations.

Table of R is shown below:

[tex]\begin{matrix} & 1 & 2 & 3 & 4 \\ 1 & 1 & 2 & 3 & 4 \\ 2 & 2 & 1 & 4 & 3 \\ 3 & 3 & 4 & 1 & 2 \\ 4 & 4 & 3 & 2 & 1 \end{matrix}[/tex]

Now let's solve the above-mentioned equations one by one.

1. (SoR) (2) = (R o S^-1) (2) = (1,4)

2. (ToS) (1) = (S o T^-1) (1) = (1,2)

3. To (SoR)(3) = (R o S) (3) = (3,4)

4. (R^-1 o S^-1) (1) = (S^-1 o R^-1) (1) = (2,1)

5. (ToS)^-1 (3) = (S^-1 o T)^-1 (3) = (2,1)

Part (b)Solution:

Given: B= {1, 2, 3, 4} and a relation R: B-B is defined as follow:

R = {(1,1), (2.2), (3.3), (4,4), (2,4), (4,2), (1,2), (2,1)}

Now we are required to check whether R is an Equivalence Relation or not.

To check if R is an Equivalence Relation, we need to check if R satisfies the following conditions:

Reflexive: If (a, a) ∈ R for every a ∈ A

Because (1,1), (2,2), (3,3), and (4,4) belong to the set R, R is reflexive.

Symmetric: If (a, b) ∈ R then (b, a) ∈ RBecause (2,4) and (4,2) belong to the set R, R is not symmetric.

Transitive: If (a, b) and (b, c) ∈ R, then (a, c) ∈ RBecause (2,4) and (4,2) are in R, but (2,2) is not in R, the relation R is not transitive.

Therefore, R is not an Equivalence Relation.

#SPJ11

Let us know more about Equivalence Relation : https://brainly.com/question/30881829.

The equation for the linear function is: y = x - 6.

The graph provided is not clear or properly formatted, making it difficult to discern the exact values and patterns. However, I will attempt to interpret the given information and provide a possible linear function equation based on the provided points.

From the limited information available, it seems like the points form a straight line. Assuming that the x-values are the numbers 1 through 8 (ignoring the unlisted negative numbers), and the y-values are -5, -4, -3, -2, 1, 1, 2, 3 respectively, we can deduce that the equation for this linear function is:

y = x - 6

Again, it is important to note that this interpretation relies on the assumption that the points are correctly labeled and ordered. Please provide a clearer or properly formatted graph for more accurate analysis.

Learn more about equation

brainly.com/question/29538993

#SPJ11

Both methods will yield the same derivative F'(t) = -(x + z)sin(s)sin(t) + (x + y)cos(t). We need to calculate the derivative of the composite function F(s, t) = f(g(s, t)).

First, we will calculate F'(t) directly using the chain rule, and then we will apply the composition rule to obtain the same result.

To calculate F'(t) directly, we need to differentiate F(s, t) with respect to t while treating s as a constant. Using the chain rule, we have F'(t) = ∂f/∂x * ∂x/∂t + ∂f/∂y * ∂y/∂t + ∂f/∂z * ∂z/∂t.

From the function g(s, t), we can see that x = cos(s), y = sin(s)cos(t), and z = sin(t). Differentiating these expressions with respect to t, we get ∂x/∂t = 0, ∂y/∂t = -sin(s)sin(t), and ∂z/∂t = cos(t).

Now, we need to find the partial derivatives of f(x, y, z). ∂f/∂x = y + z, ∂f/∂y = x + z, and ∂f/∂z = x + y.

Substituting these values into F'(t), we have F'(t) = (y + z) * 0 + (x + z) * (-sin(s)sin(t)) + (x + y) * cos(t). Simplifying further, F'(t) = -(x + z)sin(s)sin(t) + (x + y)cos(t).

To verify the result using the composition rule, we can differentiate F(s, t) with respect to t and s separately and then combine the results using the chain rule. Both methods will yield the same derivative F'(t) = -(x + z)sin(s)sin(t) + (x + y)cos(t).

To learn more about chain rule, click here:

brainly.com/question/31585086

#SPJ11

The coefficient recursive relation for the power series solution of the equation (1+x²)y' = 2y is given by aₘ = -aₘ₋₁/((m+1)(m+2)), where a₀ = 63.

To find the coefficient recursive relation, let's first consider the power series solution of the given equation:

y(x) = Σamxm

Differentiating y(x) with respect to x, we get:

y'(x) = Σmamxm-1

Substituting these expressions into the equation (1+x²)y' = 2y, we have:

(1+x²) * Σmamxm-1 = 2 * Σamxm

Expanding both sides of the equation and collecting like terms, we get:

Σamxm-1 + Σamxm+1 = 2 * Σamxm

Now, let's compare the coefficients of like powers of x on both sides of the equation. The left-hand side has two summations, and the right-hand side has a single summation. For the coefficients of xm on both sides to be equal, we need to equate the coefficients of xm-1 and xm+1 to the coefficient of xm.

For the coefficient of xm-1, we have:

am + am-1 = 0

Simplifying this equation, we get:

am = -am-1

This gives us the recursive relation for the coefficients.

Now, to find the specific coefficient values, we are given that a₀ = 63. Using the recursive relation, we can calculate the values of the other coefficients:

and so on.

Learn more about power series

brainly.com/question/29896893

#SPJ11

The value of the definite integral of 2 dx from a to b is equal to 2 times the difference between b and a.

To demonstrate that the definite integral of 2 dx equals ln(2) - ln(1), we can apply the fundamental theorem of calculus. Let's solve each part of the problem step by step:

(a) We start with the indefinite integral of 2 dx:

∫ 2 dx

Using the fact that ∫ 1 dx = x + C (where C is the constant of integration), we can rewrite the integral as:

∫ 1 dx + ∫ 1 dx

Since the integral of 1 dx is simply x, we have:

x + x + C

Simplifying further, we get:

2x + C

(b) Now, we evaluate the definite integral using the limits of integration [1, 2]:

∫[1,2] 2 dx = [2x] evaluated from 1 to 2

Plugging in the limits, we have:

[2(2) - 2(1)]

Simplifying, we get:

4 - 2 = 2

Therefore, the definite integral of 2 dx from 1 to 2 is equal to 2.

(c) Using the ideas from parts (a) and (b), we can evaluate the definite integral ∫[a,b] f(x) dx. If we have a function f(x) that can be expressed as the derivative of another function F(x), i.e., f(x) = F'(x), then the definite integral of f(x) from a to b can be calculated as F(b) - F(a).

In the given context, if f(x) = 2, we can find a function F(x) such that F'(x) = 2. Integrating 2 with respect to x gives us F(x) = 2x + C, where C is the constant of integration.

Using this, the definite integral ∫[a,b] 2 dx can be evaluated as:

F(b) - F(a) = (2b + C) - (2a + C) = 2b - 2a = 2(b - a)

To learn more about fundamental theorem of calculus click here:

brainly.com/question/30761130

#SPJ11

The pie chart is attached.

To construct a pie chart illustrating the given data set, you need to calculate the percentage of each rating category based on the total number of people who sampled the breakfast bar (900).

First, let's calculate the percentage for each rating category:

Excellent: (180 / 900) x 100 = 20%

Good: (450 / 900) x 100 = 50%

Fair: (270 / 900) x 100 = 30%

Now we can create the pie chart using these percentages.

Excellent: 20% of the pie chart

Good: 50% of the pie chart

Fair: 30% of the pie chart

Hence the pie chart is attached.

Learn more about Pie chart click;

https://brainly.com/question/1109099

#SPJ1

We would have the missing indices as;

[tex]5^-5, 5^-2 and 5^-4[/tex]

In mathematics and algebra, indices—also referred to as exponents or powers—are a technique to symbolize the repetitive multiplication of a single number. To the right of a base number, they are represented by a little raised number.

How many times the base number should be multiplied by itself is determined by the index or exponent. For instance, the base number in the phrase 23 is 2, and the index or exponent is 3. Therefore, 2 should be multiplied by itself three times, yielding the result of 8.

We would have that;

[tex]a) 5^-5 . 5^3 = 5^-2\\b)5^-2/5^-2 = 5^0\\c) (5^-4)^5 = 5^-20[/tex]

Learn more about indices:https://brainly.com/question/28269450

#SPJ1

There is not enough evidence to prove that Machine B is performing better than Machine A or The two machines are showing different qualities of performance.

Hypothesis Testing: In statistics, hypothesis testing is used to decide whether or not a particular statement about a population is likely to be true. The null hypothesis, alternative hypothesis, alpha level, test statistic, and p-value are all used in hypothesis testing. The following are the steps involved in hypothesis testing:

Step 1: State the null hypothesis H0.

Step 2: Set up the alternative hypothesis Ha.

Step 3: Determine the significance level α.

Step 4: Compute the test statistic.

Step 5: Determine the p-value.

Step 6: Make a decision and interpret the results.

If the p-value is less than the level of significance, we reject the null hypothesis, which means that the results are statistically significant. If the p-value is greater than the level of significance, we fail to reject the null hypothesis. Hence, the results are not statistically significant.

Let's see how to solve this problem. The hypothesis to be tested is:

a) Machine B is performing better than machine A.

b) The two machines are showing different qualities of performance.

Null Hypothesis H0: Machine B is not performing better than machine A or The two machines are showing the same quality of performance.

Alternative Hypothesis Ha: Machine B is performing better than machine A or The two machines are showing different qualities of performance.

Level of Significance α = 0.05. The table that gives us the critical value is the t-table.

The formula to find the test statistic is as follows:

z = (p1 - p2) / √ (p1q1/n1 + p2q2/n2)

where p1 and p2 are the sample proportions of two samples, q1 and q2 are the respective complement of p1 and p2, n1 and n2 are the respective sample sizes.

Let's calculate the test statistic for the given data:

Sample size of machine A = n1 = 200

Number of defective screws in machine A = x1 = 19

Sample size of machine B = n2 = 100

Number of defective screws in machine B = x2 = 5

Hence, p1 = x1/n1 = 19/200 = 0.095 and p2 = x2/n2 = 5/100 = 0.05

q1 = 1 - p1 = 1 - 0.095 = 0.905 and q2 = 1 - p2 = 1 - 0.05 = 0.95

Substituting these values in the formula, we get:

z = (p1 - p2) / √ (p1q1/n1 + p2q2/n2)

z = (0.095 - 0.05) / √ (0.095×0.905/200 + 0.05×0.95/100)

z = 1.15

Now, let's find the critical value of z from the t-table using the level of significance α = 0.05.

The degree of freedom (df) is (n1 - 1) + (n2 - 1) = 198 + 99 = 297.

Using this degree of freedom and the level of significance α = 0.05, the critical value of z is z = ±1.96.

Since the test statistic z = 1.15 lies in the acceptance region (-1.96 to 1.96), we fail to reject the null hypothesis.

To learn more about statistics, refer below:

https://brainly.com/question/31538429

#SPJ11

(i). Probability that a male is chosen does not have pneumonia problem is 0.60. (ii)The probability that a selected male has a pneumonia problem given that he is a smoker is 0.67.

Probability is calculated as follows:P (male without pneumonia) = 1 - P (male with pneumonia)P (male without pneumonia) = 1 - 0.4 = 0.6ii. The probability that a selected male has a pneumonia problem given that he is a smoker is 0.67.The Bayes' theorem formula is used to calculate conditional probability. The formula for Bayes' theorem is as follows:P (A/B) = (P (B/A) * P (A)) / P (B)Where,A = A male has pneumonia problemB = A male is a smokerP (B/A) = 0.80P (A) = 0.4P (B) = P (male with pneumonia and who is a smoker) + P (male without pneumonia and who is a smoker)P (male with pneumonia and who is a smoker) = (0.80 * 0.4) = 0.32P (male without pneumonia and who is a smoker) = (0.30 * 0.6) = 0.18P (B) = 0.32 + 0.18 = 0.5Putting these values in the formula:P (A/B) = (P (B/A) * P (A)) / P (B)P (A/B) = (0.80 * 0.4) / 0.5P (A/B) = 0.64 / 0.5P (A/B) = 0.67

Therefore,the probability that a male is chosen does not have pneumonia problem is 0.60.The probability that a selected male has a pneumonia problem given that he is a smoker is 0.67.

To know more about conditional probability visit:

https://brainly.com/question/32634817?referrer=searchResults

#SPJ11

The required probability values for the given scenario are 0.60 and 0.67 respectively.

The probability that a male has pneumonia problem is 0.40.

This means that the probability that a male does not have pneumonia problem is :

1 - 0.40 = 0.60.

P(Pneumonia | Smoker) = P(Pneumonia and Smoker) / P(Smoker)

P(Pneumonia | Smoker) = (0.80) / (0.80 + 0.30)

P(Pneumonia | Smoker) = 0.667

Therefore, the required values are 0.60 and 0.67 respectively.

Learn more on probability :https://brainly.com/question/24756209

#SPJ4

The expected frequency for people who are undecided about the project and have property front-footage between 45 and 120 feet is 7.7.

First, you need to calculate the row totals, column totals, and the grand total from the provided data.

Row Totals:

Under 45 feet: 12 + 4 + 4 = 20

45-120 feet: 35 + 5 + 30 = 70

Over 120 feet: 3 + 2 + 5 = 10

Column Totals:

For: 12 + 35 + 3 = 50

Undecided: 4 + 5 + 2 = 11

Against: 4 + 30 + 5 = 39

Grand Total: 20 + 70 + 10 = 100

Then, the expected frequency for the specified group can be calculated as:

Expected Frequency = (Row Total for 45-120 feet * Column Total for Undecided) / Grand Total

= (70 * 11) / 100 = 7.7

The expected frequency for people who are undecided about the project and have property front-footage between 45 and 120 feet is 7.7.

Read more on expected frequency here https://brainly.com/question/23866673

#SPJ4

Number of customers who purchased exactly two types of books

= 36 - 5Number of customers who purchased exactly two types of books = 31Therefore, a total of 31 customers purchased exactly two types of books.

Only 19 customers purchased only mysteries. Explanation:

Customers who purchased only mysteries = Total number of customers who purchased mysteries - (Number of customers who purchased mysteries and science fiction + Number of customers who purchased mysteries and romance novels + Number of customers who purchased all three types of books)Customers who purchased only mysteries = 34 - (15 + 12 + 5)

Number of customers who purchased exactly two types of books =

(Number of customers who purchased mysteries and science fiction) +

(Number of customers who purchased mysteries and romance novels)

+ (Number of customers who purchased science fiction and romance novels)Customers who purchased exactly two types of books = (15) +

(12) + (9)Customers who purchased exactly two types of books = 36However, we have to subtract the number of customers who purchased all three types of books because they were counted twice.

Number of customers who purchased exactly two types of books = 36 - 5Number of customers who purchased exactly two types of books = 31Therefore, a total of 31 customers purchased exactly two types of books.

To know more about customers  visit:-

https://brainly.com/question/12057762

#SPJ11

The estimated margin of error for the poll is approximately 0.2%.

To estimate the margin of error for the poll, we can use the Margin of Error Rule of Thumb. The rule states that for a 95% confidence level, the margin of error can be estimated by taking the square root of the sample size and dividing it by 20.

Given:

Sample size (n) = 863

Percentage in favor of changes (p) = 56%

Using the Margin of Error Rule of Thumb:

Margin of Error = (√n) / 20

Margin of Error = (√863) / 20 ≈ 29.35 / 20 ≈ 1.46875

To express the margin of error as a percentage, we can calculate the percentage of the sample size that the margin of error represents:

Percentage Margin of Error = (Margin of Error / Sample size) * 100

Percentage Margin of Error = (1.46875 / 863) * 100 ≈ 0.1702

Rounding to one decimal place, the estimated margin of error for this poll is approximately 0.2%.

Therefore, the estimated margin of error for the poll, using the Margin of Error Rule of Thumb and assuming a 95% confidence level, is approximately 0.2%.

Leran more about margin of error

brainly.com/question/29419047

#SPJ11

The two fundamental solutions of the differential equation are

y₁(x) = x[-1 + √5]/2Σ arxᵣ, where a₀ = 0 and a₁ = (√5 - 3)/4y₂(x) = x[-1 - √5]/2Σ arxᵣ, where a₀ = 0 and a₁ = (3 + √5)/4.

The difference equation to consider is

4xy'' + 2y' - y = 0

Using the Fr¨obenius method to find the two fundamental solutions of the above equation, we express the solution in the form: y(x) = Σ ar(x - x₀)r

Using this, let's assume that the solution is given by

y(x) = xᵐΣ arxᵣ,

Where r is a non-negative integer; m is a constant to be determined; x₀ is a singularity point of the equation and aₙ is a constant to be determined. We will differentiate y(x) with respect to x two times to obtain:

y'(x) = Σ arxᵣ+m; and y''(x) = Σ ar(r + m)(r + m - 1) xr+m - 2

Let's substitute these back into the given differential equation to get:

4xΣ ar(r + m)(r + m - 1) xr+m - 1 + 2Σ ar(r + m) xr+m - 1 - xᵐΣ arxᵣ= 0

On simplification, we get:

The indicial equation is therefore given by:

m(m - 1) + 2m - 1 = 0m² + m - 1 = 0

Solving the above quadratic equation using the quadratic formula gives:

m = [-1 ± √5] / 2

We take the value of m = [-1 + √5] / 2 as the negative solution makes the series diverge.

Let's put m = [-1 + √5] / 2 and r = 0 in the series

y₁(x) = x[-1 + √5]/2Σ arxᵣ

Let's solve for a₀ and a₁ as follows:

Substituting r = 0, m = [-1 + √5] / 2 and y₁(x) = x[-1 + √5]/2Σ arxᵣ in the equation 4xy'' + 2y' - y = 0 gives:

-x[-1 + √5]/2 Σ a₀ + 2x[-1 + √5]/2 Σ a₁ = 0

Comparing like terms gives the following relations: a₀ = 0;a₁ = -a₀ / 2(1)(1 + [1 - √5]/2)a₁ = -a₁[1 + (1 - √5)/2]a₁² = -a₁(3 - √5)/4 or a₁(√5 - 3)/4

For the second solution, let's take m = [-1 - √5] / 2 and r = 0 in the series

y₂(x) = x[-1 - √5]/2Σ arxᵣ

Let's solve for a₀ and a₁ as follows:

Substituting r = 0, m = [-1 - √5] / 2 and y₂(x) = x[-1 - √5]/2Σ arxᵣ in the equation 4xy'' + 2y' - y = 0 gives:

-x[-1 - √5]/2 Σ a₀ + 2x[-1 - √5]/2 Σ a₁ = 0

Comparing like terms gives the following relations: a₀ = 0;a₁ = -a₀ / 2(1)(1 + [1 + √5]/2)a₁ = -a₁[1 + (1 + √5)/2]a₁² = -a₁(3 + √5)/4 or a₁(3 + √5)/4

Therefore, the two fundamental solutions of the differential equation are

y₁(x) = x[-1 + √5]/2Σ arxᵣ, where a₀ = 0 and a₁ = (√5 - 3)/4y₂(x) = x[-1 - √5]/2Σ arxᵣ, where a₀ = 0 and a₁ = (3 + √5)/4.

To know more about differential visit:

brainly.com/question/13958985

#SPJ11

93.6% of the standard normal curve lies to the right of z.

We know that for standard normal distribution,

Mean (μ) = 0Standard Deviation (σ) = 1

We can convert standard normal distribution into normal distribution with mean (μ) and standard deviation (σ) using the Formula: Z = (X - μ) / σ

93.6% of the standard normal curve lies to the right of z.i.e.

Area to the left of z = 1 - 0.936 = 0.064

The  corresponding value of z for area 0.064.

Using standard normal distribution table, we get z = 1.56 approx

Therefore, z = 1.56Sketch of the area to the left of z is as follows:
The area to the right of z is 1 - 0.064 = 0.936.

a) The values of q that result in a dictator (list all possible values) are: q=13.

b) The smallest value of q that results in exactly one player with veto power who is not a dictator is q=7.

c) The smallest value of q that results in exactly two players with veto power is 16.

Consider the weighted voting system [q: 13, 7, 3].

a)

Which values of q result in a dictator (list all possible values)?

The given voting system is a dictator if one player has enough weight to decide the outcome of every vote.

It's also a dictator if one player has enough weight to outvote every other combination of players.

As a result, in a weighted voting system of [q: 13, 7, 3], the possible values of q that result in a dictator are: q = 13

b)

What is the smallest value for q that results in exactly one player with veto power who is not a dictator?

If one player has veto power, he or she can prevent any coalition of players from winning a vote.

In other words, the other players must band together to form a winning coalition.

In a weighted voting system with n players, one player has veto power if and only if n-1 < qi.

In a weighted voting system of [q: 13, 7, 3], the smallest value of q that results in exactly one player with veto power who is not a dictator is q=7.

c)

What is the smallest value for q that results in exactly two players with veto power?

Two players have veto power in a weighted voting system when they have enough combined weight to outvote every other combination of players.

In a weighted voting system of [q: 13, 7, 3], the possible combinations of players who could have veto power are: {13,7}, {13,3}, and {7,3}.

If two players have veto power, they must also have enough weight to outvote every other combination of players.

As a result, the smallest value of q that results in exactly two players with veto power is 16, which is the combined weight of {13,3}.

To know more about combination, visit

https://brainly.com/question/19692242

#SPJ11

Symbol transmission rate (rs) = Medium bandwidth (w) = w GHz and application data rate (rb) = 20w Gbps

To determine the symbol transmission rate (rs) in Giga symbols per second (Gsps), we need to divide the application data rate (rb) by the medium bandwidth (w).

rb = 20w Gbps, we can express it in Gsps by dividing rb by 20:

rs = rb / 20

rs = (20w Gbps) / 20

rs = w Gsps

Therefore, the symbol transmission rate (rs) in Gsps is equal to the medium bandwidth (w) in GHz.

To know more about symbol transmission rate refer here:

https://brainly.com/question/31782858#

#SPJ11