Solve 0. 0853 + 0. 05477 + 0002 report the answer to correct number of significant figures

The acid dissociation constant Ka of the acid is 2.48 x 10⁻⁸ M.

The pH of a solution is related to the concentration of H+ ions by the equation:

pH = -log[H⁺]

We know that the pH of the solution is 4.48, so we can find the concentration of H+ ions:

[H+] = [tex]10^(^-^p^H^) = 10^(^-^4^.^4^8^) = 3.52 x 10^(^-^5^) M[/tex]

Since the acid is 0.050 dissociated, the concentration of the undissociated acid is:

[HA] = 0.050 M

The dissociation reaction of the acid can be written as:

HA(aq) ⇌ H+(aq) + A-(aq)

The acid dissociation constant Ka is defined as:

Ka = [H+(aq)][A-(aq)]/[HA(aq)]

At equilibrium, the concentration of H+ ions and A- ions is equal to each other, so we can write:

Ka = [H+(aq)]²/[HA(aq)] = (3.52 x 10⁻⁵)²/0.050 = 2.48 x 10⁻⁸ M

Learn more about acid dissociation: https://brainly.com/question/15012972

#SPJ11

To find the probability that in a randomly selected office hour the number of student arrivals is 7, we can use the Poisson distribution formula.

The Poisson distribution is used to model the probability of a certain number of events occurring within a fixed interval of time or space, given the average rate of occurrence.

In this case, the average number of student arrivals is 1.9.

The probability of exactly k events occurring in a Poisson distribution is given by the formula:

P(X=k) = (e^(-λ) * λ^k) / k!

Where λ is the average rate of occurrence.

Using this formula, we can calculate the probability of exactly 7 student arrivals in the given office hour:

P(X=7) = (e^(-1.9) * 1.9^7) / 7!

Calculating this expression will give us the desired probability.

Note: The value of e in the formula represents the base of the natural logarithm and is approximately equal to 2.71828.

 To  learn  more  about Poisson click here:brainly.com/question/31019106

#SPJ11

The TRUE statement is: A basic solution has [H3O+] < [OH-].

In aqueous solutions, the concentration of hydrogen ions (H+) and hydroxide ions (OH-) determines whether the solution is acidic, neutral or basic. An acid solution has a higher concentration of H+ ions than OH- ions, while a basic solution has a higher concentration of OH- ions than H+ ions. In a neutral solution, the concentration of H+ ions and OH- ions are equal.

The pH of a solution is a measure of the concentration of H+ ions. A pH value of 7 is considered neutral, while a pH value less than 7 is considered acidic and a pH value greater than 7 is considered basic.

In a basic solution, the concentration of OH- ions is higher than the concentration of H+ ions. This means that the concentration of H3O+ ions (which are formed when water molecules combine with H+ ions) will be lower than the concentration of OH- ions. Therefore, the statement "A basic solution has [H3O+] < [OH-]" is true.

To know more about basic solutions:

https://brainly.com/question/30549961

#SPJ11

The correct name for the aromatic amine "Il = pyrimidine" is simply "pyrimidine."

Pyrimidine is an aromatic heterocyclic compound, which consists of a six-membered ring with two nitrogen atoms at positions 1 and 3.

Pyrimidine is a six-membered heterocyclic ring structure composed of four carbon atoms and two nitrogen atoms.

The nitrogen atoms are located at positions 1 and 3 within the ring. The aromatic nature of pyrimidine arises from the presence of a conjugated π electron system, which contributes to its stability and unique chemical properties.

Pyrimidine is an essential building block in nucleic acids, where it pairs with purines (adenine and guanine) to form the genetic code in DNA and RNA. It plays a critical role in storing and transmitting genetic information and is involved in various biological processes.

To summarize, pyrimidine is an aromatic heterocyclic compound with a six-membered ring containing two nitrogen atoms. It is not an aromatic amine but rather an important component of nucleic acids.

To learn more about compound, refer below:

https://brainly.com/question/13516179

#SPJ11

In order to determine the moles of edta that reacted with the calcium ions, we need to use the volume of the edta solution that was used in the reaction.

The volume of edta solution can be used to calculate the moles of edta that reacted with the calcium ions using the formula: moles of edta = (volume of edta solution) x (concentration of edta solution).

Once we have determined the moles of edta that were present in the solution, we can then calculate the moles of edta that reacted with the calcium ions.

This can be done by subtracting the moles of unreacted edta from the total moles of edta used in the reaction.

Read more about the Moles.

https://brainly.com/question/15209553

#SPJ11

Steam distillation is a highly effective method for extracting essential oils and other volatile compounds from plant materials. The effectiveness of steam distillation is supported by a large body of scientific research, which has demonstrated the efficiency of this process in extracting high-quality essential oils from a wide range of plant materials.

One key factor that contributes to the effectiveness of steam distillation is the use of high-pressure steam, which helps to release the essential oils from the plant material.

In addition, the use of water as a solvent helps to protect the delicate chemical compounds found in essential oils, preserving their quality and aroma.

Numerous studies have demonstrated the effectiveness of steam distillation in extracting essential oils from plants, including lavender, peppermint, and eucalyptus.

These studies have shown that steam distillation is capable of extracting a high yield of essential oils with excellent purity and quality, making it an ideal method for the production of essential oils and other natural plant extracts.

Read more about Steam distillation at https://brainly.com/question/29400171

#SPJ11

Approximately 15.7 grams of ammonia are consumed in the reaction of 103.0 g of lead(II) oxide.

To answer this question, we need to first write the balanced chemical equation for the reaction of lead(II) oxide with ammonia:

PbO + 2NH3 → Pb(NH3)2O

From this equation, we can see that 1 mole of lead(II) oxide reacts with 2 moles of ammonia. We can use the molar mass of lead(II) oxide to convert the given mass of 103.0 g into moles:

103.0 g PbO × (1 mole PbO/223.2 g PbO) = 0.462 moles PbO

Since 1 mole of PbO reacts with 2 moles of NH3, we can use stoichiometry to calculate the amount of NH3 consumed in the reaction:

0.462 moles PbO × (2 moles NH3/1 mole PbO) = 0.924 moles NH3

Finally, we can convert moles of NH3 to grams using its molar mass:

0.924 moles NH3 × (17.03 g NH3/1 mole NH3) = 15.62 g NH3

Therefore, 15.62 grams of ammonia are consumed in the reaction of 103.0 grams of lead(II) oxide.
To determine how many grams of ammonia are consumed in the reaction of 103.0 g of lead(II) oxide, we need to use stoichiometry. First, we need a balanced chemical equation for the reaction:

PbO (lead(II) oxide) + 2 NH3 (ammonia) → Pb(NH2)2 (lead(II) amide) + H2O (water)

Now, follow these steps:

1. Calculate the molar mass of lead(II) oxide (PbO): 207.2 g/mol (Pb) + 16.0 g/mol (O) = 223.2 g/mol.
2. Determine the moles of PbO: 103.0 g / 223.2 g/mol ≈ 0.461 mol PbO.
3. Use the stoichiometry from the balanced equation to find the moles of NH3: 0.461 mol PbO × (2 mol NH3 / 1 mol PbO) = 0.922 mol NH3.
4. Calculate the grams of NH3: 0.922 mol NH3 × 17.0 g/mol (NH3) ≈ 15.7 g.

To know more about chemical equation visit:-

https://brainly.com/question/30087623

#SPJ11

I- (aq) + 6H₂O(l) + 6H+(aq) → IO₃-(aq) + 3H₂O(l) + 2e-; 2 electrons are needed and the reaction is an oxidation.

The half-reaction is:

i- (aq) → IO₃- (aq)

To balance this half-reaction of Iodine, we need to add water and hydrogen ions on the left-hand side and electrons on one side to balance the charge. In acid solution, we will add H₂O and H+ to the left-hand side of the equation. The balanced half-reaction in acid solution is:

I- (aq) + 6H₂O(l) + 6H+(aq) → IO₃-(aq) + 3H₂O(l) + 2e-

Therefore, 2 electrons are needed to balance this half-reaction.

The half-reaction involves iodine changing its oxidation state from -1 to +5, which means that it has lost electrons and undergone oxidation. Therefore, this half-reaction represents an oxidation process.

In summary, the balanced half-reaction in acid solution for the oxidation of iodide to iodate is I- (aq) + 6H₂O(l) + 6H+(aq) → IO₃-(aq) + 3H₂O(l) + 2e-. This process involves the loss of two electrons, representing an oxidation process.

Learn more about Iodine

brainly.com/question/16867213

#SPJ11

The maximum amount of energy produced by a reaction that can be theoretically harnessed as work is equal to the Gibbs free energy change (ΔG) of the reaction.

This is the energy difference between the reactants and products at constant pressure and temperature.
ΔG represents the amount of energy that is available to do work. If ΔG is negative, the reaction is exergonic and energy is released, meaning it can be used to perform work. If ΔG is positive, the reaction is endergonic and energy must be supplied in order for the reaction to occur.
It is important to note that the maximum amount of energy that can be harnessed as work is always less than the total energy released by the reaction. This is due to the Second Law of Thermodynamics, which states that in any energy transfer or transformation, some energy will be lost as unusable energy (usually heat) that cannot be converted to work.
Therefore, it is essential to consider the efficiency of energy conversion when designing systems that aim to harness energy from chemical reactions. This is especially important in sustainable energy production, where maximizing efficiency is crucial for reducing waste and minimizing environmental impact.

To learn more about Gibbs free energy change, refer:-

https://brainly.com/question/4002787

#SPJ11

When the sodium nuclide decays by positron emission, a balanced nuclear chemical equation can be written to describe this process: [tex]22/11Na → 22/10Ne + 0/+1e[/tex] In this equation, 22/11Na represents the sodium nuclide (with a mass number of 22 and an atomic number of 11).

This nuclide decays by emitting a positron, which is represented by 0/+1e. The result of this decay is a new nuclide, 22/10Ne (neon with a mass number of 22 and an atomic number of 10). Positron emission is a type of radioactive decay in which a proton in the nucleus is converted into a neutron, releasing a positron in the process.

This happens when the nucleus has a low neutron-to-proton ratio and needs to increase it for stability. In the case of sodium, its nucleus has too many protons and not enough neutrons, leading to an unstable configuration.

As the proton transforms into a neutron, a positron is emitted from the nucleus. The emitted positron carries away the excess positive charge, thereby reducing the atomic number by one while keeping the mass number constant. The result is a new element with a more stable nucleus. In this case, sodium transforms into neon, which has one fewer proton and one additional neutron in its nucleus.

Know more about protons here:

https://brainly.com/question/30276705

#SPJ11

This reaction is highly favored, and the resulting cyclic product would be the main product of the reaction. Overall, the condensation of this molecule would result in the formation of a cyclic six-membered ring.

If we are considering an intramolecular aldol condensation of a molecule, the main cyclic product would be a six-membered ring that is formed from the reaction. The aldol condensation is a reaction where two carbonyl compounds, usually an aldehyde and a ketone, react with each other in the presence of a base to form a β-hydroxy carbonyl compound. In the case of an intramolecular aldol condensation, the reaction takes place within the same molecule, resulting in the formation of a cyclic compound. The six-membered ring would be formed by the attack of the hydroxyl group on the carbonyl group, followed by the elimination of a water molecule.

to know more about intermolecular  molecule visit:

brainly.com/question/9828612

#SPJ11

The statement "Gentamycin crystals are filtered through a small test" is unclear and lacks sufficient context to provide a definitive answer.

However, I can provide some general information about gentamicin and filtration.

Gentamicin is an antibiotic commonly used to treat bacterial infections. It is available in various forms, including solutions for injection and topical application.

Filtration is a process used to separate particles or impurities from a solution or suspension. It involves passing the solution through a filter, which retains the particles and allows the clear liquid to pass through.

If the intent of the statement is to say that gentamicin crystals are filtered through a small filter as part of the manufacturing process, this could be possible.

Gentamicin is typically produced as a powder, and filtering the crystals through a small filter could help remove any impurities and ensure a consistent particle size.

However, without additional context, it is impossible to say for certain whether gentamicin crystals are filtered through a small test.

It is also worth noting that the process of manufacturing pharmaceuticals involves many steps, and filtration is just one of them. Other steps may include purification, drying, and milling, among others.

To know more about Gentamycin crystals refer here

https://brainly.com/question/28538104#

#SPJ11

The compound Ni(NO2)2 is composed of two different ions, a cation and an anion.

The cation in this compound is nickel (Ni) and the anion is nitrite (NO2). The nickel cation has a charge of +2, which is balanced by the two nitrite anions, each with a charge of -1. The overall charge of the compound must be neutral, so the two charges of the nitrite anions cancel out the charge of the nickel cation. Therefore, the cation formula for Ni(NO2)2 is Ni2+ and the anion formula is NO2-. The nitrite anion is a polyatomic ion consisting of one nitrogen atom and two oxygen atoms.

It is important to note that although Ni(NO2)2 is considered an ionic compound, the nitrite anion is a covalent compound due to the sharing of electrons between the nitrogen and oxygen atoms. However, when combined with the positively charged nickel cation, it forms an ionic compound.

To know more about  anion visit

https://brainly.com/question/29753623

#SPJ11

The conversion of 4-pentanoylbiphenyl to 4-pentanylbiphenyl with hydrazine and potassium hydroxide is a reduction . Option c. is correct.

Because it involves the addition of hydrogen atoms to the carbon atoms in the molecule, resulting in a decrease in the oxidation state of the carbons. During the reaction, hydrazine acts as a reducing agent and reduces the ketone group (-[tex]CO^-[/tex]) to an alcohol group (-[tex]CH_2OH[/tex]). This reduction results in the conversion of the carbonyl carbon from sp2 hybridization to sp3 hybridization, resulting in the formation of a new C-H bond.

Therefore, the reaction involves a gain of electrons by the carbonyl carbon, and a reduction of the ketone functional group. There is no simultaneous oxidation of any other species in the reaction.

Therefore, the reaction is a reduction and not an oxidation or a non-redox reaction. Hence, option c. is correct.

To know more about Reduction refer here :

https://brainly.com/question/4222605

#SPJ11

There are 6.022 x 10^23 electrons in one mole, according to Avogadro's number.

The charge of one electron is 1.60 x 10^-19 coulombs. We also know that the charge of one mole of electrons is equal to the Avogadro constant, which is approximately 6.02 x 10^23.
To find the number of electrons in one atom, we need to use the concept of atomic number. The atomic number of an element is the number of protons in its nucleus. Since atoms are neutral, the number of protons is equal to the number of electrons. Therefore, the number of electrons in one atom is equal to the atomic number of that element.
Number of electrons in one mole of carbon = 6 x 6.02 x 10^23
= 3.61 x 10^24 electrons
Therefore, there are 3.61 x 10^24 electrons in one mole of carbon.
(Number of electrons in one mole) = (6.022 x 10^23) x (1.60 x 10^-19)

To know more about mole visit :-

https://brainly.com/question/30759206

#SPJ11

The amount of aluminum that can be formed by the passage of 305 C (coulombs) through an electrolytic cell containing a molten aluminum salt is 0.0286 g

Faraday's law of electrolysis states that the amount of substance produced during electrolysis is directly proportional to the amount of electricity passed through the cell. The relationship can be expressed by the equation:

moles of substance = (current in amperes x time in seconds) / (Faraday's constant x charge on one mole of the substance)

where Faraday's constant is 96,485.3 C/mol and the charge on one mole of aluminum is 3 x 96500 C (since aluminum has a 3+ charge in the electrolyte). To find the mass of aluminum produced, we need to first calculate the number of moles of aluminum produced, and then multiply by its molar mass (27 g/mol).

So, the number of moles of aluminum produced is:

moles of aluminum = (305 C / (3 x 96500 C/mol)) x (1 A / 1 C) x (1 s / 1 s)

moles of aluminum = 0.001059 mol

Finally, the mass of aluminum produced can be calculated by multiplying the number of moles by the molar mass:

mass of aluminum = 0.001059 mol x 27 g/mol

mass of aluminum = 0.0286 g

Therefore, approximately 0.0286 grams of aluminum can be formed by the passage of 305 C through an electrolytic cell containing a molten aluminum salt.

Know more about Faraday's law here:

https://brainly.com/question/17012638

#SPJ11

1. The value of Ecell at 25 °C for the given electrochemical reaction, where [Mg²⁺] = 0.100 M and [Cu²⁺] = 1.75 M, is approximately +2.75 V.

15. The value of Ecell at 25 °C for the given electrochemical reaction, where [Mg²⁺] = 0.100 M and [Cu²⁺] = 1.75 M, is approximately +2.75 V.

17. The value of Ecell at 25 °C for the given standard cell potential of 1.104 V, with [Cu²⁺] = 0.250 M and [Zn²⁺] = 1.29 M, is approximately +1.083 V.

1. To calculate the cell potential (Ecell) at 25 °C, we need to use the Nernst equation:

Ecell = E°cell - (RT/nF) * ln(Q)

Given the concentrations of [Mg²⁺] and [Cu²⁺] in the reaction, we can determine the reaction quotient (Q). Since the reaction is not specified, I assume the reduction half-reaction for copper (Cu²⁺ + 2e⁻ → Cu) and the oxidation half-reaction for magnesium (Mg → Mg²⁺ + 2e⁻).

Using the Nernst equation and the given E° values for the half-reactions, we can calculate the value of Ecell:

Ecell = E°cell - (0.0257 V/K * 298 K / 2) * ln([Cu²⁺]/[Mg²⁺])

= 2.75 V - (0.0129 V) * ln(1.75/0.100)

≈ 2.75 V - (0.0129 V) * ln(17.5)

≈ 2.75 V - (0.0129 V) * 2.862

≈ 2.75 V - 0.037 V

≈ 2.713 V

Therefore, the value of Ecell at 25 °C for the given reaction with [Mg²⁺] = 0.100 M and [Cu²⁺] = 1.75 M is approximately +2.75 V.

15. Kw, the ion product of water, represents the equilibrium constant for the autoionization of water: H₂O ⇌ H₃O⁺ + OH⁻. In pure water, at any temperature, the concentration of both H₃O⁺ and OH⁻ ions is equal, and their product (Kw) remains constant.

Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴

This constant value of Kw implies that the product of [H₃O⁺] and [OH-] in pure water is always equal to 1.0 × 10⁻¹⁴ at equilibrium. The pH and pOH of pure water are both equal to 7 (neutral), as the concentration of H₃O⁺ and OH⁻ ions are equal and each is 1.0 × 10⁻⁷ M.

Therefore, the correct statement about pure water is that Kw is always equal to 1.0 × 10⁻¹⁴.

17. Given the reduction half-reaction for copper (Cu²⁺ + 2e⁻ → Cu) and the oxidation half-reaction for zinc (Zn → Zn²⁺ + 2e⁻), the overall reaction can be written as:

Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s)

Using the Nernst equation and the given E°cell value, we can calculate the value of Ecell:

Ecell = E°cell - (0.0257 V/K * 298 K / 2) * ln([Zn²⁺]/[Cu²⁺])

= 1.104 V - (0.0129 V) * ln(1.29/0.250)

≈ 1.104 V - (0.0129 V) * ln(5.16)

≈ 1.104 V - (0.0129 V) * 1.644

≈ 1.104 V - 0.0212 V

≈ 1.083 V

Therefore, the value of Ecell at 25 °C for the given standard cell potential of 1.104 V, with [Cu²⁺] = 0.250 M and [Zn²⁺] = 1.29 M, is approximately +1.083 V.

To learn more about electrochemical reaction, here

https://brainly.com/question/31236808

#SPJ4

The molar solubility of lead sulfate in 1.0 × 10⁻³ m Na2So4 is (c) 1.8 × 10⁻⁵

The molar solubility of a compound is defined as the amount (in moles) of the compound that can dissolve in one liter of a solution. To determine the molar solubility of PbSO₄, we need to calculate the concentration of Pb2+ ions in the presence of 1.0 × 10⁻³ M Na₂SO₄.

The solubility product constant (Ksp) expression for lead sulfate (PbSO₄) is:

PbSO₄ (s) ↔ Pb₂+ (aq) + SO₄⁻²(aq)

The Ksp expression can be written as:

Ksp = [Pb₂][SO4⁻²]

In the presence of 1.0 × 10–3 M Na₂SO₄, the concentration of SO₄⁻² is already given. Therefore, we need to calculate the concentration of Pb₂+ ions in order to determine the molar solubility of PbSO₄.

Using the Ksp expression, we can write:

Ksp = [Pb₂+][SO₄²⁻]

1.8 × 10^-8 = [Pb₂+][SO₄²⁻]

[Pb₂+] = 1.8 × 10^-8 / [SO₄²⁻]

[Pb₂+] = 1.8 × 10^-8 / 0.001

[Pb₂+] = 1.8 × 10^-5 M

Therefore, the molar solubility of PbSO4 in 1.0 × 10⁻³ M Na₂SO₄ solution is 1.8 × 10⁻⁵ M.

Therefore, the correct answer is (c) 1.8 × 10⁻⁵.

To learn more about molar solubility here

https://brainly.com/question/31588030

#SPJ4