shows two masses at rest. the string is massless and the pullies are frictionless. the spring scale reads in kg. what is the reading of the scale?

Answers

Answer 1

The reading of the scale due to the two masses, massless string and the frictionless pullies is 0.

When the strings have frictionless pullies, they perform a rotary motion with the pulleys.

Net force of the masses

The two masses are connected by massless spring.

Since the masses are at rest, the sum of all the forces acting on the scale will be zero.

Fnet = o

T + M1g - M2g = 0

M1 and M2 are the masses at rest respectively.

T = M2g - M1g

Reading on the scale

Since the two given masses have same mass then their product with 'g' is  and their difference is zero.

The reading of the scale is equal to the tension in the pulley connecting the two masses.

The tension on the pulley is calculated as follows;

T = Mg - Mg

T = 0

Thus, the reading of the scale due to the given masses is 0.

To know more about frictionless pullies,

https://brainly.com/question/14989341

#SPJ4


Related Questions

when archimedes’ principle is used to measure liquid level, the apparent weight of the displacer increases as the liquid level ? .

Answers

The displacer receives a stronger force as the liquid level rises, appears heavier to the device, which takes the dieting as an increment and sends the equal signal.

In plain English, what is the Archimedes Principle?

The balance of a creature floating for still water depends on Archimede's Principle, which asserts that such a body in a liquid suffers an upthrust proportional to the volume of the fluid expelled. Gravity exerts a downward force on a body that is free-floating in calm water.

Is the Archimedes principle a rule or an idea?

The upward force that is applied to a body submerged in a fluid, whether wholly or partially, is equivalent to the mass of displaced fluid, according to Archimedes' principle (sometimes spelled Archimedes' principle). The Archimedes' rule is a fundamental physical law in fluid mechanics.

To know more about Archimedes' principle visit:

https://brainly.com/question/13106989

#SPJ4

A monatomic ideal gas is compressed at a constant pressure of 0.293 atm from a volume of 7.43 L to 3.32 L. In the process, heat energy flows out of the gas.
(a) What is the work done on the gas? Answer needs to be in J ( ± 2 J)
(b) What is the change in its internal energy? Answer needs to be in J ( ± 2 J)

Answers

The work done on the gas is 2.73 Joules and the change in internal energy of the system is -2.73 Joules.

The monoatomic gas is taken from 7.43L to 3.32L at a constant pressure of 0.293 atm.

(a) The work done for monoatomic gas is,

W = PΔV/(1-y)

P is pressure, V is volume and y is adiabatic constant which is 1.66 for monoatomic gas.

Putting values,

W = 0.293(3.32-7.73)/-0.44

W = 2.73 Joules.

So, the work done in this process is 2.73 Joules.

(b) In this process the change in internal energy is negative to the work done so, Change in internal energy of the system is -2.73 Joules.

To know more about Internal energy, visit,

https://brainly.com/question/25737117

#SPJ4

A glass has some ice and some liquid water in it. What happens if this glass is heated?.

Answers

If this glass is heated ice will turn into water

Explain forms of water.

Ice, water, and gas are all forms of water that can exist (vapour or gas). Ice, a solid, can melt into water with the addition of heat (a liquid). Ice forms when heat is removed from water, a liquid (a solid). We refer to a shift in a substance's state as occurring when liquid water becomes a solid or a gas. The molecules of the water don't change, even when its physical appearance does.

Solid water is what an ice block is. The ice turns into liquid water when heat (an energy source) is introduced. It's melted since it's at 0 degrees Celsius. If you keep heating the water, it will transform into water vapour, which is water that has turned gaseous.

To learn more about forms of water use link below:

https://brainly.com/question/28166145

#SPJ4

Calculate the average time for the tablet to dissolve in
room temperature water. Record the average time in
Table A.



Trial 1


50.00



Trial 2

52.00

Trial 3

51.00
What is the average time it took for the tablet to dissolve
in room temperature water?
seconds

Answers

In water that was 22 °C in temperature, a tablet took an average of 28.3 seconds to dissolve.

What is a drug?

Drugs are any chemicals that have an impact on how living creatures and the microbes that infect them (such as bacteria, fungi, and viruses) operate. The study of pharmaceuticals, or pharmacology, covers all facets of a drug's use in medicine, such as its mechanism of effect, physical & chemical characteristics, metabolism, treatments, and toxicity.

A drug is any substance that, when eaten, affects an organism's physiology or psychology. Foods and other items that aid in nourishment are typically kept apart from medications. Drugs can be ingested orally, smoked, injected, inhaled, applied topically with a patch and suppository, or broken down sublingually.

To know more about drug, visit:

https://brainly.com/question/20083654

#SPJ1

Answer:

51 seconded

Explanation:

Radio waves travel through empty space-faster than visible light.-slower than visible light.-at the speed of visible light.-with only electric fields and not magnetic fields.

Answers

Because a quick manifestation of charge is a monopole and electromagnetism theory states that a monopole cannot radiate, it cannot transmit electromagnetic waves.

Since electrons are always generated in pairs with positrons and the electron-positron dipole does broadcast its changing state as an electromagnetic wave at the speed of light, we actually never have to deal with this conundrum. Maxwell's equations reveal that all of space "knows" that a charge exists in the form of a field or a potential, both of which instantly fill space. Because these charges have always existed alongside their corresponding opposite charges, which may now be located elsewhere, this does not contradict the speed limit of light propagation.

Learn more about speed here-

https://brainly.com/question/28224010

#SPJ4

what was the key physical property in determining the two catergories of palnets during solar system formation

Answers

Answer: physical characteristic during the formation of the solar system most significantly contributed to the distinction between the two types of planets

Instead, look for the crucial physical characteristic that, during the formation of the solar system, distinguished between the two kinds of planets.

Explanation: What characteristics does the solar system have in terms of physics?

Dimensions of the Solar System

The novice teacher lists the characteristics of the solar system's constituent parts. defining ideas The Sun is the centre of the solar system, which also includes planets, dwarf planets, moons, comets, asteroids, meteoroids, dust, atomic particles, electromagnetic radiation, and magnetic fields.

Which two broad categories would you say our solar system's planets fall under?

The two categories of planets—terrestrial and giant—are typically used to categorize them. The four inner planets make up the four terrestrial planets: Mercury,

To know more about solar system visit;

https://brainly.com/question/12075871?

#SPJ4

what would a permanent magnetic substance be called? a. soft magnet c. hard magnet b. fast magnet d. quick magnet please select the best answer from the choices provided a b c d

Answers

A permanent magnetic substance be called a hard magnet.

Option C is correct.

What is a hard magnet?

Hard magnets, also referred to as permanent magnets can be described as those magnetic materials that retain their magnetism after being magnetized.

Examples of magnet function include the following:

Mechanical to mechanical attraction and repulsion.Mechanical to electrical, such as generators and microphones.Electrical to mechanical also found in motors, loudspeakers, charged particle deflection.Mechanical to heat found in as eddy current and hysteresis torque devices.

Learn more about hard magnets at:  https://brainly.com/question/14256749

#SPJ1

a suspension bridge oscillates with an effective force constant of 1.1 × 108 n/m.show answer no attempt 50% part (a) how much energy, in joules, is needed to make it oscillate with an amplitude of 0.095 m?

Answers

4.5 * 10⁷ J energy, in joules, is needed to make it oscillate with an amplitude of 0.095 m.

What is it Electrical amplitude?

The highest payout of a current or voltage is its amplitude. Either of the diffraction signals of the sine wave can be used to symbolize it. The peak voltage is another name for this voltage level, which might be positive or negative. Positive and negative only describe the flow of current in one direction.

Briefing:

From the periodic motion  we know that the energy of the system :

E = 1/2 kA²

E is the system's energy reserve.

The spring's amplitude is denoted by A.

The spring constant is k.

A = 0.95 m

k = 1.1 × 10⁸

Putting in known data to obtain

E = 1/2 k A²

E = 1/ 2 * 100 * 10⁸ * 0.95²

E =  4.5 * 10⁷ J

To know more about Amplitude visit:

https://brainly.com/question/9525052

#SPJ4

(a) is positive or negative work done by a constant force f with arrow on a particle during a straight-line displacement d with arrow if the angle between f with arrow and d with arrow is 27°?

Answers

The work done by a constant force f with arrow on a particle during a straight-line displacement d with arrow if the angle between f with arrow and d with arrow is 27° is positive.

Paintings done are elaborated in one way it consists of both forces exerted on the frame and the whole displacement of the frame. This block is preceded via a steady pressure F. The cause of this force is to move the frame a sure distance d in a direct route in the direction of the force.

To express this concept mathematically, the paintings W is identical to the pressure f times the gap d, or W = fd. If the force is being exerted at an attitude θ to the displacement, the paintings completed is W = FD cos θ.

The paintings accomplished through pressure are described to be the product of thing of the pressure inside the route of the displacement and the value of this displacement. formula. work can be calculated with the aid of multiplying force and Distance in the route of pressure as follows. W = F × d.

Learn more about work done here:-https://brainly.com/question/18363506

#SPJ4

a noisy machine in a factory produces a decibel rating of 72 db. how many identical machines could you add to the factory without exceeding the 85 db limit?

Answers

There are 10 identical machines could you add to the factory without exceeding the 85 dB limit.

Calculation:-

sound leve in decibel is:

β dB = 10 log ( I / Io )

where I is the intensity of sound

It is the relative intensity

72 = 10 logs ( I /10⁻¹²)

8  = log ( I /10⁻¹²)

10⁸  =  I / 10⁻¹²

I  =  10⁸ . 10⁻¹² =  10⁻⁴  W /m2

If the sound level is 85 dB, the number of identical machines is n.

85 = 10 logs ( n I / Io )

=  10 logs ( n . 10⁻⁴ / 10⁻¹² )

9  =  log ( n . 108 )

10⁹ = n. 10 8

n = 10.

so  n  = 10 .

Sounds below 70 dB are considered safe for hearing. This is the sound of a normal conversation between two people. A noise level of 80 or 85 dB will damage your hearing over time. 70 decibels is as loud as a washing machine or dishwasher. Medium noise level. 70 dB of noise is not considered harmful to human hearing.

Learn more about The sound level here:- https://brainly.com/question/17062836

#SPJ4

is the total momentum before the collision equal the total momentum after the collision. if not, what are the possible differences as to why

Answers

The overall momentum of the system can be thought of as being conserved because the total momentum before and after the collision is the same. As a result, the system receives no net external impulse.

Momentum is a vector quantity that is influenced by the object's direction. During collisions between objects, momentum is a relevant concept. The total momentum before a collision between two objects equals the total momentum after the impact (in the absence of external forces).

The law of conservation of momentum is this. It holds true in every collision. According to the principle of momentum conservation, momentum is only modified by the action of forces as they are outlined by Newton's equations of motion; momentum is never created nor destroyed inside a problem domain.

For more questions like Momentum click the link below:

https://brainly.com/question/14283213

#SPJ4

two particles of mass m and 3m are moving with the same speed v in a vacuum at right angles with the particle of mass m moving in the x-direction and the particle of mass 3m moving in the negative y-direction. a

Answers

The kinetic energy of the two particles will be equal if they are travelling at the same speed in a vacuum. The equation: gives the particle's kinetic energy.

KE = (1/2)mv^2

m is the particle's mass, v is its speed, and KE is its kinetic energy.

In this instance, the particle with mass m will have the following kinetic energy:

KE = (1/2)m*v^2

And the kinetic energy of the particle with mass 3m will be:

KE = (1/2)3mv^2

     = (3/2)mv^2

The two equations may be made to equal one another and we can solve for v because the particles have the same kinetic energy.

(1/2)mv^2 = (3/2)mv^2

(1/2)*v^2 = (3/2)*v^2

1/2 = 3/2

Since there is no solution to this equation, two particles travelling in a vacuum cannot be moving at the same speed if one of them has a mass.

To know more about Kinetic energy visit:

https://brainly.com/question/26472013

#SPJ4

What best describes the greatest height a ball will bounce off the ground after being dropped from a height of 60 centimeters?

Less than 60 centimeters, as the ball transforms a part of its potential energy into heat energy
Less than 60 centimeters, as the ball transforms some of its heat energy into potential energy
More than 60 centimeters, as the ball transforms some of its heat energy into potential energy
More than 60 centimeters, as the ball transforms some of its potential energy into heat energy

Answers

The statement that best describes the after effect of the ball is that the ball would be Less than 60 centimeters, as the ball transforms a part of its potential energy into heat energy. That is option A.

What is law of conservation of energy?

The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.

There are various types of energy which include the he following:

chemical energy, mechanical energy, nuclear energy, gravitational energy, light energy, radiant energy, sound energy, motion energy,heat energy, and electrical energy.

Potential energy is defined as the type of energy that is found in the body that is at rest. Therefore when the ball is dropped from a height, it would bounce with less than 60 centimetres as the potential energy is transformed to heat energy.

Learn more about energy here:

https://brainly.com/question/25959744

#SPJ1

when is the soonest we are likely to have moderate-resolution images and spectra of earthlike planets around other stars?

Answers

We are likely to acquire moderate-resolution photos and spectra of Earth-like planets around other stars in ten or twenty years thanks to space observatories that are currently in the planning phases.

What are stars ?

Large celestial bodies known as stars are primarily composed of hydrogen and helium and generate light and heat in their centres from churning nuclear forges. Only a very small portion of the tens of billions of trillions of stars in the observable cosmos are visible to the unaided eye.

The enormous volumes of radiation emanating from the planet's host star overwhelm any light reflected off the planet or heat radiation from the planet itself. The only way to find life on other planets is through the analysis of their spectra, which will enable us to find chemicals in other atmospheres and even look for surface features that might be signs of life.

To learn more about planets click here:

https://brainly.com/question/9544561

#SPJ4

What can one say about the size of the magnification of a single convex mirror?
It is greater than one It is equal to one. It is less than one.

Answers

A convex mirror can never provide more than one in magnification effect. This is so because a convex mirror's image of the thing is smaller than the object itself.

When an object is held 30 cm away from a convex mirror, the image it creates is half the size of the actual object. A convex mirror is a kind of spherical mirror in which the reflecting surface is the protruded portion of the sphere; in other words, the reflecting surface of these mirrors protrudes outward in the direction of the incident light source. Enlarging something's seeming size—rather than its actual size—is known as magnification. A calculated value known as "magnification" is used to measure this enlargement.

Learn more about convex mirror here

https://brainly.com/question/3627454

#SPJ4

When a metal car is struck by lightning, the resulting electric field inside the car is.

Answers

When a metal car is struck by lightning, the resulting electric field inside the car is zero.

Electric field is defined as the electric force per unit charge. The direction of the field is taken to be the direction of the force it would exert on a positive test charge.The reason a person in a car does not get hit by a lightning strike is because the roof and walls of the car present a path of less resistance than the interior of the car.It is safe to sit under a car rather than to stand under a tree during lightning. The electric field inside the car is zero.Cars are safe from lightning because of the metal cage surrounding the people inside the vehicle.

To know more about charges visit:

https://brainly.com/question/22674820

#SPJ4

initially, the translational rms speed of a molecule of an ideal gas is 461 m/s. the pressure and volume of this gas are kept constant, while the number of molecules is doubled. what is the final translational rms speed of the molecules

Answers

The stated statement states that the molecules' final maximum rate of translation is 270 m/s.

What does physics define as speed?

The rate at which the position of an object shifts in any direction. Speed is described as the ratio of the area traveled to the time required to cover that distance. Time is a scalar number since it just has a heading but no magnitude.

Briefing:

temperature at the start = T

v = √(3RT/M) = 467 m/s

temperature = T' later

note PV = mRT/M = NRT/NA

so NT = constant,

now N is tripled, T reduces to T' = T/3

so v will change to v' = √(3RT'/M) = v*√(T'/T) =v*√(1/3) = 270 m/s

To know more about Speed visit:

https://brainly.com/question/24116470

#SPJ4

energy conservation with conservative forces: a 60-kg skier pushes off the top of a frictionless hill with an initial speed of 4.0 m/s. how fast will she be moving after dropping 10 m in elevation? air resistance is negligible.

Answers

As stated in the query, 14.57 m/s is the velocity at which one would go after descending 10 m in height.

What exactly is a frictionless encounter?

A Frictionless Guest Experience: What Is It? Any stage in a customer's relationship with a business where they experience friction is when they run into a roadblock that brings them down or makes them unhappy. Customer gives seamless service, in the simplest fundamental way, entails monitoring their path and improving their encounter.

Briefing:

Here we can use the concept of mechanical energy conservation

Ui + KEi = Uf + KEf

mgh₁ + 1/2 mv²i = mgh₂ + 1/2 mv²f

Now we know that,

vi = 4m/s

m = 60kg

h₁ = 0m

h₂ = -10m As its going down

now from above equation we will have

n + 1/2(60)(1)² = (60)(9.81)(-10)+1/2(60)v²f

180 = -5886 + 30v²f

v²f = 212.2

vf = 14.57m/s

So his speed will be 14.57m/s

To know more about Frictionless visit:

https://brainly.com/question/11289241

#SPJ4

A long narrow uniform stick of length D and mass ms = m lies motionless on frictionless surface of ice puck of mass Mlp m slides without spinning on the ice with a velocity Vo toward the stick; collides elastically with one end of the stick, and rebounds in the opposite direction with velocity Vf After the collision, the center of mass of the stick moves with velocity V$, and the stick rotates about the center of mass with angular velocity Ws . Throughout the process, from finite time before the collision to finite time after the collision, the angular momentum of the rod and puck system is constant bout which of the following points? Select that apply; The center of mass of the rod-puck system The center of mass of the rod The center of mass of the puck The fixed point on the ice where the center of mass of the system was located when puck collided with the rod Any fixed point in space Angular momentum is not constant around any point

Answers

Throughout the process, from a finite time before the collision to a finite time after the collision, the angular momentum of the rod and puck system is constant about any fixed point in space.

The condition of conservation of angular momentum of a system about a point is that net torque about that point of the system must be zero. The point that has zero net torque is any fixed point in space.

τ = I α

I = L / ω

τ = L ω / ω t

τ = L / t

Since L is constant, τ = 0

To know more about conservation of angular momentum

https://brainly.com/question/1597483

#SPJ4

The distance between two consecutive crests in a wave train produced in a string is 5 cm. If two complete waves pass through any point per second. The velocity of the wave is15cm^-110cm^-12.5cm^-15cm^-1

Answers

The velocity of the wave is 10m/s .

A wave's velocity is determined by multiplying its frequency by its wavelength. The wavelength of a wave is defined as the space between two successive crests or troughs, and the frequency is the reciprocal of the wavelength in time.

We are given that,

The distance between two consecutive wave = λ = 5cm

The no. of waves = n = 2

The velocity of the wave can be calculated by the formula,

ν = nλ

v = 2 ×​ 5 = 10cm/sec

Therefore the velocity of the wave would be 10 m/s .

To know more about wave

https://brainly.com/question/28277521

#SPJ4

if the root-mean-square speed of the gas molecules is 162 m/s , what is the pressure of the gas? express your answer in pascals.

Answers

The force that the gas applies to the container boundaries is known as the gas's pressure. Along the given volume, the gas molecules move at random.

Explain about the pressure of the gas?

They bump into the ground and each other as they move. The pressure of a gas is therefore a measurement of the average linear momentum of the moving molecules in a gas because the impact of each individual gas molecule is too minute and challenging to observe. The pressure exerted on the wall is normal to it and acts perpendicularly; the gas's viscosity affects the force's tangential (shear) component.

The quantity of gas particles, the capacity of the container, and the temperature of the gas all affect how much pressure is applied to a contained gas. The pressure will rise as the volume of gas particles in a container increases. The pressure will rise as a container's volume increases.

To learn more about pressure of the gas refer to:

https://brainly.com/question/29321317

#SPJ4

among irregular galaxies, what makes the large and small magellanic cloud especially useful for astronomers?

Answers

Among irregular galaxies, the large and small magellanic cloud are useful for astronomers to study because they are very close to us.

Why are large and small magellanic cloud special?

The Milky Way's satellite galaxies are the Large and Small Magellanic Clouds. They are large, misty blobs of light that stand out against the night sky as some of the nearest galaxies to our home galaxy.

According to estimates, there are about 3 billion stars in the Small Magellanic Cloud and 30 billion stars in the Large Magellanic Cloud.

The Large and Small Clouds are thought to have originated between 12 and 13 billion years ago, at around the same time as our Milky Way.

Great galactic tides may have shaped them irregularly due to their repeated interactions with the larger Milky Way galaxy.

What is an irregular galaxy?The shapes of irregular galaxies are amorphous.They are packed with gas and dust and are among of the tiniest galaxies.These galaxies are undergoing intense star formation as a result of their abundance of gas and dust.This may enhance their intelligence.Uneven galaxies include the Large and Small Magellanic Clouds.They are two little galaxies that revolve around the Milky Way Galaxy in our own galaxy.Unusual galaxies make for about 20% of all galaxies.

Can learn more about irregular galaxies from: https://brainly.com/question/1241789

#SPJ4

a 54kg cube accelerates at 1.3 m/s^2/ if it was pushed at 164 n what is the coefficient of friction between the cube and the ground

Answers

The coefficient of friction between the cube and the ground is 0.177.

Friction is a shape of contact pressure. It exists between the surfaces that are in touch. The frictional force relies upon on the character of the floor in contact. The rougher the ground, the extra the friction is involved. The frictional force is proportional to the urgent pressure, that is the burden of the body. it's miles impartial of the place of the touch.

Calculation:-

F = ma

  = 54 × 1.3 m/s²

  = 70.2

force required = 164 N

so friction force = 164 - 70.2 N

                           = 93.8 N

normal force = mg

                      = 54 × 9.8

                      = 529.2 N

Friction force = μN

    μ = Friction force/N

        = 93.8 / 529.2

         = 0.177

Friction is the force resisting the relative motion of sturdy surfaces, fluid layers, and material factors sliding towards each specific. There are numerous styles of friction. Dry friction is a strain that opposes the relative lateral movement of two stable surfaces in touch.

Learn more about friction here:-https://brainly.com/question/24338873

#SPJ4

A metal cools from an initial temperature of 225 oc to 25 oc and releases 160 j of heat energy. If the mass of the metal is 5. 0 g, what is its specific heat capacity?.

Answers

If a metal cools  while releasing 160 j of heat energy, its specific heat capacity is 1.4222 J/kg. In the event that the metal weighs 5.0 g

How is the change of specific heat calculated given the temperature?

The equation q = mcT, where m is the sample mass, c is the specific heat, and T is the temperature change, can be used to determine how much heat is absorbed or lost by a sample (q).

T₁ = 225°C

T₂ = 25°C

q = -160 J

m = 5.0 g

As we know,

q = mcΔT

Now,

-160 = 5*c*(T₂-T₁)

-160 = 5*c*(25-225)

c = -160/5(-200)

c = 0.16 J/g°c.

How can you determine the ultimate temperature given the initial?

To calculate your substance's final heat, multiply the temperature change by the starting temperature.For instance, if your water started out at 24 degrees Celsius, it final

To know more about specific heat visit:

https://brainly.com/question/11297584

#SPJ4

a proton is at rest at the plane vertical boundary of a region containing a uniform vertical magnetic field b. an alpha particle moving horizontally makes a head-on elastic collision with the proton. immediately after the collision, both particles enter the magnetic field, moving perpendicular to the direction of the field. the radius of the proton's trajectory is 4.0 r. find the radius of the alpha particle's trajectory as a factor of r. the mass of the alpha particle is four times that of the proton, and its charge is twice that of the proton.

Answers

The radius of the alpha particle's trajectory is 4.0 r.

What is elastic collision?

An elastic collision is one in which the system does not experience a net loss of kinetic energy as a result of the collision.

Given:  the mass of the alpha particle is four times that of the proton, and its charge is twice that of the proton.

After elastic collision, the speed of the  proton and the alpha particle will be in a ratio of 2: 1.

Let, the speed of the proton be2 v then the speed of the alpha particle be v.

So, the proton's trajectory is = 2mv/qB = 4.0 r

Hence, alpha particle's trajectory is = (4m×v)/(2qB)

=2mv/qB  

=4.0 r

= 4.0r.

Learn more about  elastic collisions here:

https://brainly.com/question/12941951

#SPJ1

what is the value of q/m for a particle that moves in a circle of radius 6.8 mm in a 0.50 t magnetic field if a crossed 260 v/m electric field will make the path straight?

Answers

If a crossover 260 v/m magnetic field will render the path straight, then the value of q/m for a piece moving within a circle at size 6.8 mm in some kind of a 0.50 t magnetic field is 0.0982 T.m2.

Simply put, what's a magnetic field?

The region around a magnet where the effects of magnetism are felt is known as the magnetic field. To describe that how magnetic force is dispersed in the area around and inside something magnetic in nature, we utilize the magnetic flux as a tool.

Briefing :

Given, magnitude of magnetic field, B = 0.5 T

radius of the loop, r = 6.88 m

Area  is given by;

A = πr²

A = 3.142 x (6.88)²

A = 148.72 m²

The magnitude of the magnetic flux through the loop is given by;

Ф = BA

Where;

B is the magnitude of the magnetic field

A is area of the field

Ф = 0.5 x 0.1964

Ф = 0.0982 T.m²

Therefore, the magnitude of the magnetic flux through the loop is 0.0982 T.m²

To know more about magnetic field visit:

https://brainly.com/question/24397546

#SPJ4

What can your employer do to protect you from overhead power lines? select the 3 answer options that apply.

Answers

To protect you from overhead power lines:

Keep a safe distance away from lines when working.

Ask the power company to ground and de-energize the electrical lines.

The only way to avoid being electrocuted is to wear PPE.

Have insulated sleeves, commonly referred to as "eels," installed over electricity wires by the utility provider.

What exactly do overhead power wires mean?

To carry electrical energy across long distances, an overhead power line is a structure used in electric power transmission and distribution. For three-phase power, it typically consists of one or more uninsulated electrical cables suspended from towers or poles.

The more precautions taken, the better in order to prevent the employee from being electrocuted by the electricity lines. The safety of the personnel must be ensured by taking all necessary precautions. Particularly when it comes to electrical wiring, problems might arise in a variety of ways.

To know more about overhead power wires  use link below:

https://brainly.com/question/13489356

#SPJ4

sort the galaxy rotation curves according to whether they would support or refute the hypothesis that galaxies are made up only of visible matter.

Answers

The claim is refuted -rotation curve 1, -rotation curve 3, -rotation curve 2 -supports Rotation Curve 4, Rotation Curve 6, and Rotation Curve 5

Curves is a particular kind of workout.

You can work every significant muscle area with Curves since it combines stretching, cardio, and upper- and lower-body strength training routines. It may be done by people of all fitness levels and employs hydraulic resistance gym equipment created specifically for ladies.

To Curves, may guys go?

Although males are permitted to join in some jurisdictions, Curves fitness and weight reduction facilities are focused solely on and built for women. Competitors of the clubs include Spa Lady and Lucille Roberts, two chains that cater only to women.

To know more about Curves visit:

https://brainly.com/question/28793630

#SPJ4

A small car collides head-on with a large SUV. Which of the following statements concerning this collision are correct?
A. Both vehicles are acted upon by the same average force during the collision.
B. The small car is acted upon by a greater average force than the SUV.
C. The small car undergoes a greater change in momentum than the SUV.
D. Both vehicles undergo the same change in momentum.

Answers

A small car collides head-on with a large SUV, both vehicles undergo the same change in magnitude of momentum.

The collision also called effect, in physics, is the unexpected, forceful coming together in direct contact of bodies, which includes, for an instance,  billiard balls, a golf membership and a ball, a hammer and a nail head,  railroad automobiles while being coupled together, or a falling item and a floor.

Physicists use collisions to determine the houses of atomic and subatomic debris. Essentially, a particle accelerator is a device that provides a managed collision system among subatomic debris so that, amongst other things, some of the houses of the target particle can be studied. The maximum common motive of an automobile collision is distracted use.

Learn more about Collision here:-https://brainly.com/question/20628781

#SPJ4

a projectile is thrown upward with speed v by the time its speed has decreased to 3v/4 it has risen a height h what is the maximum height reached by the projectile if it is projected at an angle of 60 with the horizontal

Answers

The maximum height attained by the projectile in terms of h is 12h/7.

What is the maximum height reached by the projectile?

The maximum height attained by the projectile is calculated by applying the following formula as shown below.

H = v² sin²θ / 2g

where;

v is the initial speed of the baseballg is the acceleration due to gravityθ is the angle of projection of the ball

H = ( v² ( sin 60 )² ) / 2g

H = ( v² x ³/₄ ) /2g

H = 3v² / 8g

To solve for the maximum height attained by the projectile in terms of h is calculated as follows;

vf² = vi² - 2gh

2gh = vi² - vf²

h = (vi² - vf²) /2g

where;

vi is the initial velocity of the projectile = vvf is the final velocity of the projectile = 3v/4g is acceleration due to gravity

h = (v² - (3v/4)²) / 2g

h = (v² - 9v²/16) / 2g

h = (7v²/16) / 2g

h = 7v² / 32g

7v² = 32gh

v² = 32gh/7

The maximum height becomes;

H = 3v² / 8g

H = 3(32gh / 7) / 8g

H = (3 x 32 gh) / (7 x 8g)

H = 12 h / 7

Learn more about maximum height here: https://brainly.com/question/12446886

#SPJ1

Other Questions
currently, 3m company pays an annual dividend of $2.50. if the stock is selling for $100, what is the dividend yield? white southerners expressed their desire to continue by issuing the southern manifesto. integration segregation desegregation for a firm that uses a single manufacturing overhead account, the journal entry to write off overapplied manufacturing overhead includes a debit to . multiple choice question. cost of goods sold manufacturing overhead which nursing action would be the primary consideration when caring for a client with a substance use disorder? based on the survivorship curves shown below, which of the following is a possible reason for the change in the shape of the curve from 1900 to 1980? The dimensions of a room with one window and one door are shown. Ivan wants to have the four walls painted. The painter says the area is 542.2 square feet.PLEASE HELP ASAPPP!!! THX (multi-answer) How many days are in 42 weeks? 294 days 504 days 1,008 days 2,520 days Tim answered all the questions on the math test but got 10 wrong answers. He got 4 points for each correct answer, there were no penalty points for incorrect answers. His score was 76 points. Write an equation to find the total number of questions (q) on Tim's math test purple-flowered tall plants (rrtt) are crossed with white-flowered dwarf plants (wet). in the f2 generation, of 16 possible combinations, how many would be white, tall carbon dioxide is carried in three forms in the blood. ranking them from greatest to least amount carried, the sequence would be: question content area the liability for a dividend is recorded on the a.last day of the fiscal year b.date of declaration c.date of record d.date of payment DUE TOMORROWWrite a poem about the Odyssey using separate paper. Your poem should be at least 20 lines long. It can focus on the entire story or one particular scene or adventure. You can write from the perspective of an outside narrator/speaker or from a characters perspective. Use imagery and figurative language to add interest and depth of meaning to your poem. after several months of being unable to sleep well, wayne ladner visited his doctor about this problem. his doctor recorded this condition as being enter your entire script below. do not include statements to drop objects as your script will be executed against a clean schema. you may include select statements in sub queries in your insert statements, but do not include select queries that return records for display. continue to use the purchase 61 and purchase item 61 tables that you created and modified in the previous problems. increase the shippping cost of every purchase from manufacturers in massachusetts ('ma') by 10%. round your calculations to two decimal points. hint: use the in clause. do not use a join GreenCut Lawnmowers makes three models of push mower: the Standard, the Premium, and the Pro. Condensed income statement data related to the three models are as follows: Standard Premium Pro Sales $499,000 $320,000 $450,000 Variable costs 68,000 69,000 72,000 Cont. margin 431,000 251,000 378,000 Fixed costs 245,000 264,000 271,000 Net income $186,000 $(13,000) $107,000 GreenCut is considering discontinuing the Premium mower; if it does so, 35% of premium cost would be eliminated. what would happen if greencut stops manufavturing the premium? how did the adoption of the mercantilist policies by european states impact the establishment and growth of the african slave trade? FILL IN THE BLANK. In 1609 the area known as New York was first claimed and settled by Henry Hudson, who was an Englishman, but he was employed by a ______ company. Sexual reproduction results in unique genetic combinations due to the crossing over of non-sister chromatids. During which process does this take place? a special power tool for plastic products costs $400,000 and has a 4- year useful life, no salvage value, and a 2-year before-tax payback 12-28 period. assume uniform annual end-of-year benefits. a (a) compute the before-tax rate of return. (b) compute the after-tax rate of return, based on macrs depreciation and a 24% combined corporate income tax rate. sampling on campus. you see a woman student standing in front of the student center, now and then stopping other students to ask them questions. she says that she is collecting student opinions for a class assignment. explain why this sampling method is almost certainly biased.