Answer:
(a): Precipitate of calcium carbonate will form.
(b): Precipitate of barium sulfate will form.
(c): Precipitate of silver iodide will form.
(d): Precipitate of sodium chromate will form.
Explanation:
Complete ionic equation is defined as the equation in which all the substances that are strong electrolytes present in an aqueous state and are represented in the form of ions.
Net ionic equation is defined as the equations in which spectator ions are not included.
Spectator ions are the ones that are present equally on the reactant and product sides. They do not participate in the reaction.
(a):
The balanced molecular equation is:
[tex]CaCl_2(aq)+K_2CO_3(aq)\rightarrow 2KCl(aq)+CaCO_3(s)[/tex]
The complete ionic equation follows:
[tex]Ca^{2+}(aq)+2Cl^-(aq)+2K^+(aq)+CO_3^{2-}(aq)\rightarrow 2K^+(aq)+2Cl^-(aq)+CaCO_3(s)[/tex]
As potassium and chloride ions are present on both sides of the reaction. Thus, they are considered spectator ions.
The net ionic equation follows:
[tex]Ca^{2+}(aq)+CO_3^{2-}(aq)\rightarrow CaCO_3(s)[/tex]
Precipitate of calcium carbonate will form.
(b)
The balanced molecular equation is:
[tex]BaCl_2(aq)+MgSO_4(aq)\rightarrow MgCl_2(aq)+BaSO_4(s)[/tex]
The complete ionic equation follows:
[tex]Ba^{2+}(aq)+2Cl^-(aq)+Mg^{2+}(aq)+SO_4^{2-}(aq)\rightarrow Mg^{2+}(aq)+2Cl^-(aq)+BaSO_4(s)[/tex]
As magnesium and chloride ions are present on both sides of the reaction. Thus, they are considered spectator ions.
The net ionic equation follows:
[tex]Ba^{2+}(aq)+SO_4^{2-}(aq)\rightarrow BaSO_4(s)[/tex]
Precipitate of barium sulfate will form.
(c):
The balanced molecular equation is:
[tex]AgNO_3(aq)+KI(aq)\rightarrow KNO_3(aq)+AgI(s)[/tex]
The complete ionic equation follows:
[tex]Ag^{+}(aq)+NO_3^-(aq)+K^+(aq)+I^{-}(aq)\rightarrow K^+(aq)+NO_3^-(aq)+AgI(s)[/tex]
As potassium and nitrate ions are present on both sides of the reaction. Thus, they are considered spectator ions.
The net ionic equation follows:
[tex]Ag^{+}(aq)+I^{-}(aq)\rightarrow AgI(s)[/tex]
Precipitate of silver iodide will form.
(d):
The balanced molecular equation is:
[tex]2NaCl(aq)+(NH_4)_2CrO_4(aq)\rightarrow 2NH_4Cl(aq)+Na_2CrO_4(s)[/tex]
The complete ionic equation follows:
[tex]2Na^{+}(aq)+2Cl^-(aq)+2NH_4^+(aq)+CrO_4^{2-}(aq)\rightarrow 2NH_4^+(aq)+2Cl^-(aq)+Na_2CrO_4(s)[/tex]
As ammonium and chloride ions are present on both sides of the reaction. Thus, they are considered spectator ions.
The net ionic equation follows:
[tex]2Na^{+}(aq)+CrO_4^{2-}(aq)\rightarrow Na_2CrO_4(s)[/tex]
Precipitate of sodium chromate will form.
write any 5 great scientist name
Albert Einstein
Marie Curie
Isaac Newton
Charles Darwin
Nikola Tesla
Galileo Galilei
Ada Lovelace
Please mark me brainliest!
Albert Einstein Charles Darwin Robert Hooke Issac Newton
Galileo Galilei
Convection currents occur:
a. Only in liquids
b. When a dense substance is warmer than a less dense substance
c. In both liquids and gases
d. Weakly in solids
Answer:
Jaheem has a goal running a total of 125 miles this month. Each day that he ran, he ran 7 miles. Which expression could Jaheem use to determine how many miles he has left to run after running for d days?
x a.
125 – 7d
x b.
7d + 125
x c. fraction numerator 125 over denominator 7 d end fraction
x d.
7dExplanation:Jaheem has a goal running a total of 125 miles this month. Each day that he ran, he ran 7 miles. Which expression could Jaheem use to determine how many miles he has left to run after running for d days?
x a.
125 – 7d
x b.
7d + 125
x c. fraction numerator 125 over denominator 7 d end fraction
x d.
7d
Waves conduct energy through
express the measurement 4.22 quarts in the units of microliters
Answer:
[tex]3.99x10^6 \mu L[/tex]
Explanation:
Hello there!
In this case, for this units conversion problem, it turns out necessary to write the equivalence statement for liters and quarts as follows:
1 qt = 0.946353 L
Thus, the conversion set up turns out to be:
[tex]4.22qt*\frac{0.946353 L}{1qt} \\\\=3.99L[/tex]
Next, we convert to microliters as follows:
[tex]3.99L*\frac{1\mu L}{10^{-6}L}\\\\=3.99x10^6 \mu L[/tex]
Regards!
what is the NGOs location in Nigeria
Answer:
9E , Badagry road , off marine road , apapa , Lagos State
Explanation
When aqueous solutions of AgNO3 and MgCl2 are mixed, a precipitate forms. What is the correct formula for the precipitate
Answer:
AgCl
Explanation:
The reaction that takes place is:
2AgNO₃ (aq) + MgCl₂ (aq) → Mg(NO₃) (aq) + 2AgCl (s)The precipitate (meaning a solid substance) formed is silver chloride, AgCl.
All salts formed with silver and a halogen (F, Cl, Br, I) are insoluble in water, meaning that when working with aqueous solutions they will be precipitates.
Is [Ni(CO)4] considered as coordination compounds?
What are the effects of climate change? Answer this question integrating other topics of science.
Answer:
»Climatic change leads to malnutrition.
e.g when its cold season, osmoregulation decreases and rate of metabolism declines.
This is because the enzymes lack that optimum temperature for their catalytic activity to take place hence improper digestion.
»Leads to promotion of predation in ecosystem.
such as reptiles e.g snakes, lizards get away from shelters on cold days since they are cold blooded, hence their predators such as animals, birds increase.
5.4 When looking down the C{{TOP-HAT-MATH-TOKEN-0}}-C{{TOP-HAT-MATH-TOKEN-1}} bond in 2,3-dimethylbutane, what is the most stable conformer
Answer:
The most stable conformer would be the anti-conformer when the substituent methyl groups are farthest away from each other.
Explanation:
Isomers are chemical compounds with the same molecular formula but with different molecular structures.
Conformers are a special type of isomers that produce different structures when the substituents of a Carbon-Carbon single bond (C-C) are rotated.
In 2,3 dimethyl butane, the substituent methyl groups are located around the second and third Carbon to Carbon single bond.
To achieve a stable configuration, the methyl group substituents need to be as far apart as possible (that is, in an anti-position) to minimise repulsion.
The closer the methyl groups are to each other, the more they repel each other and the more unstable the conformer becomes.
How many atoms are there in 5.20 mil of hafnium. Please help due in 1hr
PLS HELP ME WITH THESE QUESTIONS ITS DUE TOMORROW I WILL MARK U AS BRAINLIEST
Answer:
See Explanation
Explanation:
1 mole of Cl2 gas occupies 22.4 L
x moles of Cl2 gas occupies 5.24 L
x= 1 × 5.24/22.4
x= 0.23 moles of Cl2
According to the kinetic theory of gases, the particles of a gas are in constant random motion and collide with each other and the walls of the container. Collision between gas particles are perfectly elastic.
Hence the statement that particles must not be able to move in any fixed or open container is false according to the kinetic theory of gases.
When an ionic compound is created, energy is _________when creating the cation, energy is usually _______ when creating the anion, and energy is _______ when the ionic bond is formed resulting in a net [ Select ] of energy for the entire process of making an ionic compound.
Answer:
Absorbed
Released
Released
Explanation:
The formation of a cation is an endothermic process because energy must be absorbed in order to remove an electron from an atom.
Similarly, energy is evolved when an electron is added to an atom to form a negative ion.
The formation of an ionic compound is an exothermic process. Since ionic compounds are more stable than the individual ions separated by a distance, the excess energy of the isolated ions is evolved when the ionic compound is formed.
Which of the following pure copper samples contains the largest number of
atoms?
Sample A: 6.70 g
Sample B: 0.110 mol
Sample C: 7.83 x 1022 atoms
Answer:
Correct option is
D
1 g of B(s)
Larger is the number of moles, larger is the number of molecules.
As molar mass of B is lowest (=11 g), it will have larger number of moles. Hence, its 1 g will have highest number of molecules and moles.
Answer:d
Explanation:
A 3.82L balloon filled with gas is warmed from 204.9K to 304.8 K.
What is the volume of the gas after it is heated?
Given :
A 3.82L balloon filled with gas is warmed from 204.9K to 304.8 K.
To Find :
The volume of the gas after it is heated.
Solution :
Since, their is no information about pressure in the question statement let us assume that pressure is constant.
Now, we know by ideal gas equation at constant pressure :
[tex]\dfrac{V_1}{V_2} = \dfrac{T_1}{T_2}\\\\\dfrac{3.82}{V_2}= \dfrac{204.9}{304.8}\\\\V_2 = \dfrac{304.8}{204.9} \times 3.82\\\\V_2 = 5.68 \ L[/tex]
Hence, this is the required solution.
What what I put to answer this?
When a liquid sample is taken from sea level to a higher elevation, what happens to the external (atmospheric) pressure on the liquid and the boiling point of the liquid
Answer:
The external atmospheric pressure decreases and so does the boiling point of the liquid.
Explanation:
We know that pressure decreases with height. Thus atmospheric pressure decreases at higher elevation.
The implication of this is that, if I take a liquid from sea level to a higher elevation, the external atmospheric pressure on the liquid will decrease and so does its boiling point.
Hence, the liquid boils at a lower temperature when placed at a higher elevation. For this reason, the boiling point of a liquid is lower on the mountain.
Identify whether the following are dependent or independent clause
1. Because he cannot pick up our son
2. I am typing on the computer
3. They will have gone to Disney World
4. Before we arrive in Florida
Answer:
1. dependent clause
2. Independent clause
3. Independent clause
4. Dependent clause
Explanation:
In English language, there are two types of clauses (a group of words that contain subject and predicate) viz; independent clause and dependent clause.
INDEPENDENT CLAUSE is a clause that can stand alone to form a complete sentence, possessing a subject and a predicate.
On the other hand, a DEPENDENT CLAUSE cannot stand alone to form a complete and meaningful sentence, but instead depends on another sentence to make sense. It is often recognizable as they start with subordinating conjunctions such as while, because, when etc.
According to this question, the following are examples of independent and dependent clauses:
1. Because he cannot pick up our son - dependent clause
2. I am typing on the computer - independent clause
3. They will have gone to Disney World - independent clause
4. Before we arrive in Florida - dependent clause
Hydrogen chloride gas and oxygen react to form water vapor and chlorine gas. What volume of chlorine would be produced by this reaction if 7.12 L of oxygen were consumed?
Also, be sure your answer has a unit symbol, and is rounded to 3 significant digits.
Answer:
6
Explanation:
fpufjpufuodhodoyhupupddupud
How many grams of gas must be released from a 32.0 L sample of CO2(g) at STP to reduce the volume to 16.6 L at STP?
Answer:
30.3 g
Explanation:
At STP, 1 mol of any gas will occupy 22.4 L.
With the information above in mind, we calculate how many moles are there in 32.0 L:
32.0 L ÷ 22.4 L/mol = 1.43 molThen we calculate how many moles would there be in 16.6 L:
16.6 L ÷ 22.4 L/mol = 0.741 molThe difference in moles is:
1.43 mol - 0.741 mol = 0.689 molFinally we convert 0.689 moles of CO₂ into grams, using its molar mass:
0.689 mol * 44 g/mol = 30.3 gGiven the following information, calculate the density in g/mL of an irregular solid.
Mass of weighing vessel 1.005g
Mass of solid + weighing vessel 9.441g
Volume of liquid in graduated cylinder 3.45 mL
Volume of liquid in graduated cylinder + volume of solid 5.45 mL
Answer:
4.22 g/mL
Explanation:
First we calculate the mass of the solid via mass difference:
Mass of solid = 9.441 g - 1.005 g = 8.436 gThen we calculate the volume of the solid, once again by difference:
Volume of solid = 5.45 mL - 3.45 mL = 2.00 mLFinally we calculate the density in g/mL:
Density = 8.436 g / 2.00 mL = 4.22 g/mLThe density of an irregular solid will be "4.96 g/mL".
According to the question,
→ The Mass of solid will be:
= [tex][(Mass \ of \ solid+ Weighing \ vessel)-(Mass \ of \ weighing)][/tex]
By substituting the values, we get
= [tex]9.441-1.005[/tex]
= [tex]8.436 \ g[/tex]
→ The Volume of solid will be:
= [tex][(Volume \ of \ liquid \ in \ grad. \ cylinder+Solid)-(Volume \ of \ grad. \ cylinder)][/tex]
= [tex]5.15 - 3.45[/tex]
= [tex]1.70 \ mL[/tex]
hence,
→ The density of irregular solid will be:
= [tex]\frac{Mass}{Volume}[/tex]
= [tex]\frac{8.436}{1.70}[/tex]
= [tex]4.96 \ mL[/tex]
Thus the above is the correct answer.
Learn more:
https://brainly.com/question/1150199
The energies of the bonds broken in a certain reaction are greater than the energies of the bonds formed. Which one of the following statements about this reaction must be true?
a. The reaction is endothermic.
b. The reaction is exothermic.
c. The reaction is spontaneous.
d. The reaction is non-spontaneous.
Answer:
a. The reaction is endothermic.
Explanation:
The heat involved in a chemical reaction is given by the enthalpy change (ΔH), which is equal to the balance between the chemical bonds that are broken (release energy) and the chemical bonds that are formed (need energy):
ΔH ≅ bonds broken - bonds formed
If broken bonds > bonds formed ⇒ ΔH > 0 ⇒ endothermic reaction
Therefore, the reaction is endothermic (it requires energy).
A sample of polystyrene, which has a specific heat capacity of , is put into a calorimeter (see sketch at right) that contains of water. The polystyrene sample starts off at and the temperature of the water starts off at . When the temperature of the water stops changing it's . The pressure remains constant at . Calculate the mass of the polystyrene sample. Be sure your answer is rounded to significant digits.
This question is incomplete, the complete question is;
A sample of polystyrene, which has a specific heat capacity of 1.880 J.g⁻¹, is put into a calorimeter (see sketch at right) that contains 300.0 g of water. The polystyrene sample starts off at 94.9 °C and the temperature of the water starts off at 22.0. When the temperature of the water stops changing it's 27 °C . The pressure remains constant at 1 atm.
Calculate the mass of the polystyrene sample. Be sure your answer is rounded to 2 significant digits.
Answer:
the mass of the polystyrene sample is 57 g
Explanation:
Given the data in the question;
mass of water m[tex]_{water[/tex] = 300 g
Temperature of water T[tex]_{water[/tex] = 22 °C
Specific heat capacity of water C[tex]_{water[/tex] = 4.184 J/g°C
mass of the polystyrene sample m[tex]_{polystyrene[/tex] = ?
T[tex]_{polystyrene[/tex] = 94.9 °C
Specific heat capacity of polystyrene; C[tex]_{polystyrene[/tex] = 1.880 J.g⁻¹.°C⁻¹
T = 27.7 °C
Now, using heat conservation equation
heat lost by polystyrene = heat gained by water
m[tex]_{polystyrene[/tex] × C[tex]_{polystyrene[/tex] × ( T[tex]_{polystyrene[/tex] - T ) = m[tex]_{water[/tex] × C[tex]_{water[/tex] × ( T - T[tex]_{water[/tex] )
We substitute
m[tex]_{polystyrene[/tex] × 1.880 × ( 94.9 - 27.7 ) = 300 × 4.184 × ( 27.7 - 22 )
m[tex]_{polystyrene[/tex] × 1.880 × 67.2 = 300 × 4.184 × 5.7
m[tex]_{polystyrene[/tex] × 126.336 = 7154.64
m[tex]_{polystyrene[/tex] = 7154.64 / 126.336
m[tex]_{polystyrene[/tex] = 56.63 ≈ 57 g { 2 significant figures }
Therefore, the mass of the polystyrene sample is 57 g
HCl(aq) and KOH(aq) Express your answer as a balanced chemical equation. Identify all of the phases in your answer.
Answer:
HCl(aq) + KOH(aq)---------->KCl (aq)+ H2O(l)
The osmotic pressure exerted by a solution is equal to the molarity multiplied by the absolute temperature and the gas constant . Suppose the osmotic pressure of a certain solution is measured to be at an absolute temperature of .
Answer:
c = π/T*R
c = 0.199M
Explanation:
Is measured to be 5.1 atm at an absolute temperature of 312. K. Write an equation that will let you calculate the molarity c of this solution. Your equation should contain only symbols. Be sure you define each symbol other than R.
The osmotic pressure of a solution, π, is defined as:
π = c*T*R
As we know osmotic pressure π = 5.1atm, T = 312K and R = 0.082atmL/molK
we can replace in the equation as follows:
π= c*T*R
c = π/T*Rc = 5.1atm/312K*0.082atmL/molK
c = 0.199M
HELP PLEASE!!!!
Can someone answer it as a paragraph please I should submit it today
Answer:
Jodi is violating two rules; She is not wearing any safety equipment and managed to catch fire to herself. She is also not wearing gloves or safety goggles like the other two. Kimberly is leaving fire unattended, and can cause many accidents and if chemicals come in contact in the wrong way, it could be catastrophic. Kimberly is also carelessly using a fire extinguisher carelessly and chemicals in the can cause accidents.
Explanation:
I hope this helps <3
A Chemical Reactions Takes Place When
Answer:
A chemical Reaction Takes place when New bonds are formed between atoms to create new compounds
Explanation:
There are four signs that a chemical reaction has occurred: a change in color, a change in temperature, formation of a gas or formation of a precipitate. A precipitate is a solid that forms when two liquid solutions are mixed.
The graph shows a relationship between volume and temperature. Which of the following statements is true?
A.) The graph shows a directly proportional relationship between volume and temperature and represents Charles' Law.
B.) The graph shows an indirectly proportional relationship between volume and temperature and represents Boyle's Law.
C.) The graph shows an indirectly proportional relationship between volume and temperature and represents Gay-Lussac's Law.
4.) The graph indicates that when temperature is increased, volume decreases.
Answer:
The graph shows a directly proportional relationship between volume and temperature and represents Charles' Law.
Explanation:
The relation between volume and temperature is given by :
Ideal gas law, PV = nRT
Where
P is pressure
V is volume
R is gas constant
T is temperature
As volume and temperature have direct relationship. Charles law states that there is a direct relationship between volume and temperature. The correct option is (a).
A 100.0 mL sample of natural water was titrated with NaOH. The titration required 14.53 mL of 0.1031 M NaOH solution to reach a light pink phenolphthalein end point.
Calculate the number of millimoles of NaOH required for the titration.
Answer:
The correct answer is 1.498.
Explanation:
Based on the given information, the volume of NaOH needed for the titration is 14.53 ml, and the concentration of NaOH given is 0.1031 M.
The volume of NaOH, that is, 14.53 ml can also be written as 14.53 × 10⁻³ L.
The concentration of NaOH, that is, 0.1031 M can also be written as 0.1031 moles/Litre.
Molarity (M) is determined as,
M = No of moles/Volume in litres
No of moles = Molarity × Litres
No of moles = 0.1031 moles/Litres × 14.53 × 10⁻³ L
No of moles = 1.498 × 10⁻³ L
Now, number of millimoles = 1.498 × 10⁻³ L × 1000 (millimoles = moles × 1000)
Number of millimoles = 1.498
The number of millimoles of NaOH required for the titration is 1.50 mmol
From the question,
We are to determine the number of millimoles of NaOH required for the titration
From the given information
The titration required 14.53 mL of 0.1031 M NaOH solution
From the formula
Number of moles = Concentration × Volume
Concentration of the NaOH = 0.1031 M
Volume of the NaOH = 14.53 mL
∴ Number of millimoles of NaOH required = 0.1031 × 14.53
Number of millimoles of NaOH required = 1.498043 mmol
Number of millimoles of NaOH required ≅ 1.50 mmol
Hence, the number of millimoles of NaOH required for the titration is 1.50 mmol
Learn more here: https://brainly.com/question/21086618
Metallic Bond
When nitrogen shares electrons with oxygen, what kind of bond is made?
Answer: covalent bonds
Explanation:
2 A + 4 B → 2 C How many mol of B must react with excess A to produce 2 mol of C?
Answer:
4 mol B
Explanation:
Step 1: Write the balanced generic equation
2 A + 4 B → 2 C
Step 2: Establish the appropriate molar ratio
According to the balanced equation, the molar ratio of B to C is 4:2.
Step 3: Calculate the moles of B needed to produce 2 moles of C
2 mol C × 4 mol B/2 mol C = 4 mol B