Show how to carry out the following transformation in the highest yield possible. Select the appropriate reagents and/or draw the correct organic product at each step. Use an expanded octet on sulfur to minimize formal charges

Answers

Answer 1

Factors that make the higher yield of crop possible are as follows: enough water for irrigation. access of organic manure of high quality . Fertilizers are a factor in the higher yields of high-cost farming.

Fertilizer is used to ensure good vegetative growth (leaves, branches and flowers), giving rise to healthy plants. They are artificially made but have a rapid response. Overuse of fertilisers can cause negative effects like loose soil fertility. There's a risk with any bond that the issuing company might not be able to meet its obligations.

However, the risks of default are typically higher for companies that issue high-yield bonds. Interest rate . If the octet is expanded with preferred number of bonds, formal charge = 0. The S-atom will gain two electrons in order to complete its octet.

To know more about higher yield click here .

brainly.com/question/26503165

#SPJ4


Related Questions

Determine the empirical formula of a compound containing 48.38 grams of carbon, 6.74 grams of hydrogen, and 53.5 grams of oxygen.

In an experiment, the molar mass of the compound was determined to be 180.15 g/mol. What is the molecular formula of the compound?

For both questions, show your work or explain how you determined the formulas by giving specific values used in calculations.

Answers

Answer:

Hence, C121H199O100 represents the compound's empirical formula.

Explanation:

We must ascertain the ratio of the number of atoms of each element in the compound in order to derive the empirical formula. To accomplish this, we can divide the mole ratio by the least number of moles after converting the masses of each element to moles.

The elements' molar masses are as follows:

12.01 g/mol for carbon

1.01 g/mol for hydrogen

16.00 g/mol for oxygen

When we convert the masses to moles, we obtain:

48.38 g / 12.01 g/mol = 4.03 mol of carbon

6.74 g / 1.01 g/mol of hydrogen equals 6.67 mol

53.5 g / 16.00 g/mol = 3.34 mol for oxygen

3.34 mol of oxygen is the least amount of moles. If you divide the total moles of each element by 3.34 mol, you get:

Carbon: 4.03 mol/3.3 mol = 1.21 mol Hydrogen:6.67 moles/3.34 moles equals 1.99

3.34 mol / 3.34 mol = 1.00 for oxygen.

By multiplying each ratio by 100 to obtain whole integers, we may simplify the ratios, which are around 1.21:1.99:1.00. This results in a ratio of roughly 121:199:100.

We divide each number in the ratio by their greatest common factor (GCF) to arrive at the empirical formula. 121, 199, and 100 have a GCF of 1. By dividing by 1, we get:

Carbohydrate: 121 / 1 = 121

199 / 1 = 199 for hydrogen.

100 / 1 Equals 100 for oxygen.

Hence, C121H199O100 represents the compound's empirical formula.

Answer:

First, I will convert from grams to moles. This will give me approximately 4.032 moles of carbon, 6.740 moles of hydrogen, and 3.344 moles of oxygen. Then, I will calculate the mole ratio, using whole numbers. I must also identify the least amount of moles in an element for this step, which is oxygen at 3.344 moles.

Oxygen = 3.344/3.344 = 1

Carbon = 4.032/3.344 = 1

Hydrogen = 6.740/3.344 = 2

The empirical formula will be COH2.

Now that we have the molar mass of the molecular formula, we can calculate for the molecular formula. First, we will begin by discovering the molar mass of the empirical formula, which will be C molar mass x 1 + O molar mass x 1 + H molar mass x 2. That will be equal to 60.949. After that, we can divide the molecular mass by the empirical formula molar mass, giving us approximately 3. Now we will multiply the empirical formula by 3, giving us our molecular formula, which will be equal to C3O3H6.

Which statement best describes the law of conservation of energy?
A. The total energy in an open system can only decrease.
B. Energy can be created but not destroyed.
C. Energy can change forms but cannot be created or destroyed.
D. Energy can be destroyed but not created.

Answers

Answer:

c

Explanation:

energy neither created nor distroyed

Answer:

The answer is C

Explanation:

We learned so many times about law conservation energy,states that"Energy neither created or destroyed but can change its form to other."

E.g If we rub our palm,it changes from kinetic energy to heat energy.

Calculate the pH of a 0. 30 M solution of sodium formate (NaHCOO) given that the Ka of formic acid (HCOOH) is 1. 8 x 10-4. 8. 61 10. 26 11. 87 5. 39 2. 13

Answers

The pH of the 0.30 M solution of sodium formate is 2.13.
The correct answer is E. 2.13.

Formic acid dissociates in water to form hydrogen formate (HCOO-) and a proton (H+).

Since the Ka of HCOOH is [tex]1.8 * 10^{-4}[/tex], the Kb of HCOO- is equal to Ka x Kb = ([tex]1.8 * 10^{-4}[/tex])([tex]1.0 * 10^{-14}[/tex]) = [tex]1.8 * 10^{-18}[/tex].

The ionization of sodium formate (NaHCOO) can be represented as:

[tex]NaHCOO + H^2O < = > HCOO^- + Na^+ +[/tex] [tex]H^3O^+[/tex]

We can use the Kb of HCOO- to calculate the equilibrium concentrations of the species in the solution.

[HCOO-] = [NaHCOO] = 0.30 M

[Na+] = [[tex]H^3O^+[/tex]] = 0

Kb = [HCOO-][[tex]H^3O^+[/tex]]/[NaHCOO]

1.8 x 10-18 = (0.30)(x)/(0.30)

x = 1.8 x 10-18

The pH of the solution can then be calculated using the equation:

pH = -log[[tex]H^3O^+[/tex]]

pH = -log(1.8 x 10-18)

pH = 2.13

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

Question should be like

Calculate the pH of a 0. 30 M solution of sodium formate (NaHCOO) given that the Ka of formic acid (HCOOH) is 1. 8 x 10^-4.

A. 8. 61

B. 10. 26

C. 11. 87

D. 5. 39

E. 2. 13

What is the new pressure of gas with a solubility of 24 g/ L if 48 g/L is soluble at 444 kPa

Answers

The new pressure of the gas with a solubility of 24 g/L will be222 kPa.

The solubility of the gas in the liquid is directly proportional to the partial pressure of a gas above the liquid. This relationship is described by Henry's Law, which states that the solubility of a gas is proportional to its partial pressure:

C = kP

where C is the concentration of the gas in the liquid (in units of g/L), P is the partial pressure of the gas above the liquid (in units of kPa), and k is the proportionality constant.

If we know the solubility of the gas at one pressure, we can use Henry's Law to calculate the solubility at a different pressure. For example, if the solubility of the gas is 48 g/L at 444 kPa, and we want to know the solubility at a new pressure, we can use the following formula:

P₁ / P₂ = C₁ / C₂

where P₁ is the initial pressure, P₂ is the new pressure, C₁ is the initial concentration (solubility) at P₁, and C₂ is the new concentration (solubility) at P₂.

Rearranging this formula, we get:

C₂ = C₁ x (P₂ / P₁)

Substituting the given values, we have:

C₁ = 48 g/L (solubility at 444 kPa)

P₁ = 444 kPa

C₂ = 24 g/L (desired solubility at new pressure)

P₂ = ?

Solving for P₂, we get:

P₂ = (C₂ x P₁) / C₁

P₂ = (24 g/L x 444 kPa) / 48 g/L

P₂ = 222 kPa

To know more about solubility here

https://brainly.com/question/22185953

#SPJ4

Please answer all questions <3


10) If Reaction B (above) was at equilibrium and then was heated ____________ CH3OH would be present after the reaction adjusts to the new temperature.

more
less
the same amount of

11) If Reaction B (above) was at equilibrium and then the pressure in its container was increased, ____________ CH3OH would be present after the reaction adjusts to the new pressure.

more
less
the same amount of

12) If Reaction B (above) was at equilibrium and then H2 was added, ____________ CH3OH would be present after the reaction adjusts.

more
less
the same amount of

13) If Reaction B (above) was at equilibrium and then H2 was added, ____________ CO would be present after the reaction adjusts.

more
less
the same amount of

Answers

Answer:

10. methanol would be more.

11. methanol would be more.

12. methanol would remain the same.

13. CO would be less.

Explanation:

10. Methanol increases because the forward reaction is favoured with increase in temperature and thus it is endothermic.

11. Methanol increases because the forward reaction is favoured with decrease in volume thus increasing pressure decreases the volume of the vessel.

12.Methanol remains the same because the hydrogen added is its raw material but the CO is acting as a limiting reactant for the formation of methanol.

13. Carbon monoxide becomes less because it will rapidly combine with hydrogen added to form methanol and then later be a limiting reactant when hydrogen is still present

What is the formula for sulfide ions and calcium ion?​

Answers

Answer:

the formula for sulfide ion is S²⁻, and the formula for calcium ion is Ca²⁺. When combined, they form calcium sulfide with the chemical formula CaS.

Explanation:

At constant pressure, which of these systems do work on the surroundings? Check all that apply.a. 2A(g)+3B(g) --> 4C(g)b. A(s)+B(g) --> 2C(g)c. A(g)+B(g) --> 3C(g)d. A(s)+2B(g) --> C(g)

Answers

At constant pressure, the systems that work on the surroundings are: A(s)+B(g) → 2C(g), A(g)+B(g) → 3C(g). The correct options are B and C.

Explanation:

In thermodynamics, if the reaction proceeds at constant pressure, it implies that the pressure remains constant during the course of the reaction, whereas the volume might change. The systems that work on the surroundings are those in which work is done on the surroundings by the system, resulting in a decrease in the internal energy of the system.

Option a. 2A(g)+3B(g) → 4C(g)

The reaction's stoichiometric coefficients of the reactants and products are balanced, implying that the number of moles of reactants and products is the same. It means there is no change in the number of moles of gas, which means there is no expansion of gases, resulting in no work done by the system. Thus, this option does not satisfy the criteria for a system working on the surroundings.

Option b. A(s)+B(g) → 2C(g)

The reaction has one gas molecule in the reactants and two gas molecules in the products, implying that there is an increase in the number of moles of gas. As a result, there is an increase in the volume, resulting in work being done by the system. This option satisfies the requirements for a system working on the surroundings.

Option c. A(g)+B(g) → 3C(g)

The reaction has two gas molecules in the reactants and three gas molecules in the products, which means there is an increase in the number of moles of gas. As a result, there is an increase in the volume, resulting in work being done by the system. This option satisfies the requirements for a system working on the surroundings.

Option d. A(s)+2B(g) → C(g)

The reaction has two gas molecules in the reactants and one gas molecule in the product, implying that there is a decrease in the number of moles of gas. It implies that the volume of the system will decrease, resulting in no work done by the system. Thus, this option does not satisfy the criteria for a system working on the surroundings.

Therefore, the options that work on the surroundings at constant pressure are options b and c.

To know more about constant pressure refer here:

https://brainly.com/question/13994756#

#SPJ11

A supersonic aircraft (SST) consumes 5,320 gallons of jet fuel per flight hour. A company in 1990 had 380 SSTs in operation and that
for economic reasons each plane should watch approximately 14 hours a day. If world crude oil production was about
of 4.02 x 10° metric tons per year in 1990 and it takes approximately 7000 kilograms of crude oil to produce 1 ton of
of jet fuel. What percentage of the crude oil production in 1990 will be used for fuel for the S5Ts. It is known that 0.031 troy ounces of
jet-fuel occupy a volume of 1000 mm'.

Answers

Answer: First, we need to calculate the total fuel consumption per day for all 380 SSTs:

Fuel consumption per hour: 5,320 gallons

Number of planes: 380

Hours per day: 14

Total fuel consumption per day = 5,320 x 380 x 14 = 28,190,400 gallons

Next, we need to convert gallons to metric tons of jet fuel:

1 gallon = 0.00378541 metric tons

28,190,400 gallons = 106,698.89 metric tons

Now, we can calculate the total crude oil needed to produce this amount of jet fuel:

1 ton of jet fuel = 7,000 kilograms of crude oil

106,698.89 tons of jet fuel = 746,892,230 kilograms of crude oil

To convert kilograms to metric tons:

1 metric ton = 1,000 kilograms

746,892,230 kilograms = 746,892.23 metric tons

Finally, we can calculate the percentage of crude oil production used for SST fuel:

World crude oil production in 1990 = 4.02 x 10^9 metric tons

Percentage of crude oil used for SST fuel = (746,892.23 / 4.02 x 10^9) x 100

= 0.0186%

Therefore, approximately 0.0186% of the crude oil production in 1990 was used for fuel for the SSTs.

Enjoy brainiest appreciated (;  

A 44. 0-mg sample of phosphorus reacts with sulfur to form 158 mg of the compound phosphorus sulfide. Part a what is the empirical formula of phosphorus sulfide?

Answers

The empirical formula of phosphorus sulfide is [tex]P^{1}S^3.[/tex].

To determine the empirical formula of phosphorus sulfide, we need to find the mole ratio between phosphorus and sulfur in the compound. We can use the given masses of phosphorus and phosphorus sulfide to calculate the number of moles of each element.

First, we convert the masses of phosphorus and phosphorus sulfide from milligrams to grams:

Mass of P = 44.0 mg = 0.0440 g

Mass of P4S3 = 158 mg = 0.158 g

Next, we calculate the number of moles of each element:

Moles of P = mass of P / molar mass of P = 0.0440 g / 30.97 g/mol = 0.00142 mol

Moles of S = (mass of P4S3 - mass of P) / molar mass of S = (0.158 g - 0.0440 g) / 32.07 g/mol = 0.00393 mol

We then divide the number of moles of each element by the smallest value to obtain the simplest whole-number ratio of atoms:

Moles of P / 0.00142 mol ≈ 1

Moles of S / 0.00142 mol ≈ 2.77

We can then round the above ratio to the nearest whole number to get the empirical formula:

[tex]P^{1}S^3.[/tex]

Phosphorus sulfide is a chemical compound with the formula P4S3. It is a yellowish-white solid with a garlic-like odor, and is insoluble in water but soluble in carbon disulfide.

It is formed by the reaction of phosphorus with sulfur, and can also be produced by heating a mixture of red phosphorus and sulfur.

For more question on empirical formula click on

https://brainly.com/question/1603500

#SPJ11

How are useful substances obtained from common salt?

Answers

Answer: In the chlor alkali process, sodium hydroxide is prepared from common salt (sodium chloride). The byproducts are hydrogen gas and chlorine gas. Electrolysis of aqueous sodium chloride (brine solution) in Castner-kellner cell gives sodium hydroxide, chlorine gas and hydrogen gas.

Answer: Useful substances are obtained from common salt by the process of electrolysis

which of the following is not a limitation of a friedel-crafts reaction. alkyl halides must have the halogen attached to an sp3 hybridized carbon , not selected friedel-crafts alkylation substrates can undergo rearrangement , not selected incorrect answer: friedel-crafts reactions can not be done on moderately or strongly deactivated ring systems friedel-crafts acylation often leads to polyacylated products. , not selected friedel-crafts alkylation often leads to polyalkylated products.

Answers

Answer: sp3

Explanation:

The correct answer is that Friedel-Crafts reactions can not be done on moderately or strongly deactivated ring systems.

This is a limitation of Friedel-Crafts reactions because they require an activated ring system in order to proceed.

Deactivated ring systems do not have the necessary electron density to facilitate the reaction, and therefore the reaction will not occur.

Friedel-Crafts alkylation and acylation reactions are both types of electrophilic aromatic substitution reactions that involve the formation of a carbon-carbon bond between an aromatic ring and an alkyl or acyl group.

These reactions are commonly used in organic synthesis to introduce new functional groups onto an aromatic ring.

However, they do have other limitations including the fact that Friedel-Crafts alkylation substrates can undergo rearrangement,

Friedel-Crafts acylation often leads to polyacylated products,

and Friedel-Crafts alkylation often leads to polyalkylated products.

These limitations must be taken into consideration when designing a synthetic route that involves a Friedel-Crafts reaction.

To know more about Friedel-Crafts reactions, refer here:

https://brainly.com/question/30861499#

#SPJ11

During which position is north america experiencing spring?

Answers

North America is experiencing spring during the position when the Northern Hemisphere is tilted towards the Sun, which occurs around March 20th to 21st, known as the Vernal Equinox.

The point in the Earth's orbit around the Sun when the tilt of axis is neither towards nor away from the Sun is known as the Vernal Equinox, also known as the Spring Equinox. Because of this arrangement, the length of day and night is almost identical over the whole globe. This occasion, which occurs in North America around March 20–21, heralds the start of the spring season. The Northern Hemisphere begins to tilt towards the Sun around this time, lengthening the day and raising temperatures. Agriculture, migratory patterns, and different cultural holidays are significantly impacted by this change in the Earth's position.

learn more about Spring Equinox here:

https://brainly.com/question/12070199

#SPJ4

1. Determine the percentage composition of each of the following compounds:

a. NaClO b. Al 2 (SO 3 ) 3 c. C 2 H 5 COOH d. BeCl 2

2. Determine the percentage by mass of water in the hydrate CuSO 4 5H 2 O

Answers

The percentage by mass of water in the hydrate [tex]CuSO^{4}.5H^{2}O[/tex] is 47.6%.

The percentage composition of each of the following compounds are

1.a. NaClO:

The molar mass of NaClO =

22.99 g/mol + 35.45 g/mol + 15.99 g/mol = 74.43 g/mol

Percentage composition of Na =

(22.99 g/mol / 74.43 g/mol) *  100 \ percent \ = 30.9percent

Percentage composition of Cl =

(35.45 g/mol / 74.43 g/mol) *  100percent \ =  47.6percent

Percentage composition of O =

(15.99 g/mol / 74.43 g/mol) * 100percent \ =  21.5percent

Therefore, the percentage composition of NaClO is approximately:

30.9% Na, 47.6% Cl, and 21.5% O.

1.b. [tex]Al^{2}(SO^{3})^{3}[/tex]:

The molar mass of [tex]Al^{2}(SO^{3})^{3}[/tex] = [tex]2 * (26.98 g/mol) + 3 * (32.06 g/mol + 3 * 16.00 g/mol) = 342.14 g/mol[/tex]

Percentage composition of Al =

[tex](2 * 26.98 g/mol / 342.14 g/mol) * 100 \ = 3.99[/tex]%

Percentage composition of S =

[tex](3 * 32.06 g/mol / 342.14 g/mol) * 100 \ = 8.99[/tex]%

Percentage composition of O =

[tex](9 * 16.00 g/mol / 342.14 g/mol) * 100 \ = 10.47[/tex]%

Therefore, the percentage composition of [tex]Al^{2}(SO^{3})^{3}[/tex] is approximately:

3.99% Al, 8.99% S, and 10.47% O.

1.c. [tex]C^{2}H^{5}COOH[/tex]:

The molar mass of [tex]C^{2}H^{5}COOH[/tex] = [tex]2 * (12.01 g/mol) + 6 * (1.01 g/mol) + 12.01 g/mol + 16.00 g/mol = 60.05 g/mol[/tex]

Percentage composition of C =

[tex](2 * 12.01 g/mol / 60.05 g/mol) * 100 \ = 40.0[/tex]%

Percentage composition of H =

[tex](6 * 1.01 g/mol / 60.05 g/mol) * 100\ \ = 10.1[/tex]%

Percentage composition of O = [tex](2 * 16.00 g/mol + 12.01 g/mol / 60.05 g/mol) * 100 \ = 49.9[/tex]%

Therefore, the percentage composition of [tex]C^{2}H^{5}COOH[/tex] is approximately:

40.0% C, 10.1% H, and 49.9% O.

1.d. [tex]BeCl^2[/tex]:
The molar mass of [tex]BeCl^2[/tex] = [tex]9.01 g/mol + 2 * 35.45 g/mol = 79.91 g/mol[/tex]

Percentage composition of Be = [tex](9.01 g/mol / 79.91 g/mol) * 100 \ = 11.3[/tex]%

Percentage composition of Cl =

[tex](2 * 35.45 g/mol / 79.91 g/mol)* 100 \ = 88.7[/tex]%

Therefore, the percentage composition of [tex]BeCl^2[/tex] is approximately:

11.3% Be and 88.7% Cl.

2. [tex]CuSO^{4}.5H^{2}O[/tex]:

Mass of CuSO4.5H2O = 8.40 g

Mass of anhydrous [tex]CuSO^{4}[/tex] = mass of [tex]CuSO^{4}.5H^{2}O[/tex] - mass of water

Mass of water = mass of [tex]CuSO^{4}.5H^{2}O[/tex] - mass of anhydrous CuSO4

[tex]= 8.40 g - 4.40 g= 4.00 g[/tex]

So, the mass of water in the hydrate is 4.00 g.

To determine the percentage by mass of water in the hydrate, we need to divide the mass of water by the mass of the entire compound ([tex]CuSO^{4}.5H^{2}O[/tex]) and multiply by 100%:

Percentage by mass of water = (mass of water/mass of [tex]CuSO^{4}.5H^{2}O[/tex]) x 100%

[tex]= (4.00 g/8.40 g) * 100= 47.6[/tex]%

Therefore, the percentage by mass of water in the hydrate [tex]CuSO^{4}.5H^{2}O[/tex] is 47.6%.

For more question on mass click on

https://brainly.com/question/30390726

#SPJ11

Which element "X" forms an ionic compound with the formula X3P2?

Answers

Answer:

Explanation:

not sure your elements to choose from

But it would be one with a +2 charge

Examples

Be, Mg, Ca, Sr, Ba, Cu, Fe these are just a few

send your list and I can finish this for you

Balance the following equations

Answers

i dont now, i hope that help you :) :D

We can measure the rate of reaction between calcium carbonate and acid by displacing the water in an upturned measuring cylinder with the carbon dioxide produced.

Explain
whether the time taken to displace all of the water in a measuring cylinder will be greater for lumps of calcium carbonate or powder.

Answers

Whether the time taken tο displace all οf the water in a measuring cylinder will be greater fοr lumps οf calcium carbοnate οr pοwder are mentiοned belοw.

What is reactiοn?  

The transfοrmatiοn οf οne οr mοre reactants intο οne οr mοre new prοducts is referred tο as a chemical reactiοn. Substances are made οf chemical cοnstituents οr cοmpοunds. The transfοrmatiοn οf οne οr mοre reactants intο οne οr mοre new prοducts is referred tο as a chemical reactiοn. Substances are made οf chemical cοnstituents οr cοmpοunds.

What is carbοn diοxide?  

One part carbοn and twο parts οxygen make up the gas called carbοn diοxide. Its usage by plants tο create carbοhydrates during a prοcess knοwn as phοtοsynthesis makes it οne οf the mοst significant gases οn the planet.

The cοncentratiοn οf calcium carbοnate cannοt fluctuate because it is a sοlid. Hence, the οnly reactant in this reactiοn that can fluctuate in cοncentratiοn and impact reactiοn rate is hydrοchlοric acid. We need tο graph the cοncentratiοn οf hydrοchlοric acid against time, as yοu shοuld knοw frοm yοur reactiοn rate theοry.

Therefοre, whether the time taken tο displace all οf the water in a measuring cylinder will be greater fοr lumps οf calcium carbοnate οr pοwder are mentiοned abοve.

Learn more about reaction from the given link.

https://brainly.com/question/11231920

#SPJ1

An ice block of mass 3.00 kg has a temperature of 0°C. When energy of 5.01 × 105 J is transferred to the ice block, half of the block melts to water at 0°C.
(a) Determine the specific latent heat of fusion of ice.

____J/g
(b) How much energy would be needed to melt the remainder of the ice.

____J
(c) An extra energy of 2 × 105 J is transferred to the mixture of the ice block and water. What will be the temperature of the mixture?

____degreesCelsius

Answers

The energy required to increase 1.000 kg of water ice between 0 °C °C through 79.8 °C °C is equivalent to the energy required to melt one pound of ice (334 kJ).

What changes in the water's temperature occur as it transitions from ice to water vapour?

No surface temp change happens from heat exchange if ice caps melt and has become water ice (i.e., that during phase transition). Imagine about water melting from stalactites that were already dripping on a sun-warmed roof. Alternatively, water boils in an ice bucket cooled by relatively low surroundings.

How warm is the water now that the frost has melted?

To melt, the iceberg will take in all the heat that is available. The water stays at zero degrees Fahrenheit until all of the ice has dissolved as when the ice has melted, it changes becomes saltwater at that temperature.

To know more about energy visit:

https://brainly.com/question/626780

#SPJ1

A student measures the molar solubility of nickel(II) cyanide in a water solution to be 2. 00×10-8 M. What is the ksp

Answers

A student measures the molar solubility of nickel(II) cyanide in a water solution to be 2. 00×10-8 M. The Ksp of nickel(II) cyanide is [tex]8 \times10^{-24}[/tex]

The solubility product constant, Ksp, serves as the equilibrium constant for solids that dissolve in water. The level of solute dissolution in solution is what it stands for. The more soluble a material is, the higher its Ksp value.

The following equation may be used to get the solubility product constant (Ksp) for nickel(II) cyanide from the molar solubility:

[tex]Ni(CN)_2(s)[/tex] ⇌ [tex]Ni_2+(aq) + 2CN^-(aq)[/tex]

[tex]Ksp = [Ni_2^+][CN^-]^2[/tex]

As per the given information,  

the molar solubility of nickel(II) cyanide is given as [tex]2.00\times 10^{-8}[/tex]M, the concentrations of [tex]Ni_2^+[/tex] and [tex]CN^-[/tex] ions are also [tex]2.00 \times 10^{-8}[/tex] M.

We have to find the Ksp of nickel(II) cyanide.

Hence, the Ksp can be calculated as:

Ksp = [tex](2.00\times10^{-8})(2.00\times10^{-8})^{2}[/tex]

Ksp =[tex]8.00\times10^{-24}[/tex]

Hence, the Ksp of nickel(II) cyanide is [tex]8.00\times10^{-24}[/tex]

For similar question on Ksp value

https://brainly.com/question/29010250

#SPJ4

the strength of an acid depends primarily on the conjugate base's ability to support a negative charge. true induction is long range electronegativity, and the presence of electronegative atoms improves acidity of distant h. false h bonded to larger atoms are more acidic due to poor orbital overlap, and polarizability of large orbitals. [ select ] increasing the % of s-orbit

Answers

All the statements are about the acidity of compounds, of which statement 1, 3 & 4 are true and statement 2 is false.

Statement 1: "the strength of an acid depends primarily on the conjugate base's ability to support a negative charge" is true because, a strong acid has a weak conjugate base, which means it is less able to support a negative charge.

Statement 2: "induction is long range electronegativity, and the presence of electronegative atoms improves acidity of distant H" is false.

Because, induction is the ability of an electronegative atom or group to withdraw electron density from a neighbouring atom or group, leading to an increase in acidity.

However, this effect is not long range, and typically only affects neighbouring atoms.

Statement 3: "H bonded to larger atoms are more acidic due to poor orbital overlap, and polarizability of large orbitals" is true.

Because larger atoms have larger orbitals, which leads to poor orbital overlap and weaker bonds with hydrogen.

This makes it easier for the hydrogen to dissociate and increases the acidity of the compound.

Statement 4: "increasing the % of s-orbital character in a bond increases acidity" is true.

S-orbitals are closer to the nucleus and have a lower energy than p-orbitals, leading to stronger bonds and increased acidity.

To know more about acidity of compounds, refer here:

https://brainly.com/question/30723218#

#SPJ11

25g of NH3 is mixed with 4 moles of O2 in the given reaction
a) Which is limiting reactant?
b) What mass of NO is formed?
c) What mass of H2O is formed?

Answers

A. The limiting reactant is NH₃

B. The mass of NO formed is 44.1 g

C. The mass of H₂O formed is 39.7 g

A. How do i determine the limiting reactant?

First, we shall determine the mass in 4 moles of O₂. Details below:

Molar mass of O₂ = 32 g/mol Mole of O₂ = 4 molesMass of O₂ = ?

Mole = mass / molar mass

4 = Mass of O₂ / 32

Cross multiply

Mass of O₂ = 4 × 32

Mass of O₂ = 138 g

Finally, we shall determine the limiting reactant. Details below:

4NH₃ + 5O₂ -> 4NO + 6H₂O

Molar mass of NH₃ = 17 g/molMass of NH₃ from the balanced equation = 4 × 17 = 68 g Molar mass of O₂ = 32 g/molMass of O₂ from the balanced equation = 5 × 32 = 160 g

From the balanced equation above,

68 g of NH₃ reacted with 160 g of O₂

Therefore,

25 g of NH₃ will react with = (25 × 160) / 68 = 58.8 g of O₂

From the above calculation, we can see that only 58.8 g of O₂ out of 138 g is needed to react with 25 g NH₃.

Thus, the limiting reactant is NH₃

B. How do i determine the mass of NO formed?

The mass of NO formed can be obtained as illustrated below:

4NH₃ + 5O₂ -> 4NO + 6H₂O

Molar mass of NH₃ = 17 g/molMass of NH₃ from the balanced equation = 4 × 17 = 68 g Molar mass of NO = 30 g/molMass of NO from the balanced equation = 4 × 30 = 120 g

From the balanced equation above,

68 g of NH₃ reacted to produce 120 g of NO

Therefore,

25 g of NH₃ will react to produce = (25 × 120) / 68 = 44.1 g of NO

Thus, the mass of NO formed is 44.1 g

C. How do i determine the mass of H₂O formed?

The mass of H₂O formed can be obtained as illustrated below:

4NH₃ + 5O₂ -> 4NO + 6H₂O

Molar mass of NH₃ = 17 g/molMass of NH₃ from the balanced equation = 4 × 17 = 68 g Molar mass of H₂O = 18 g/molMass of H₂O from the balanced equation = 6 × 18 = 108 g

From the balanced equation above,

68 g of NH₃ reacted to produce 108 g of H₂O

Therefore,

25 g of NH₃ will react to produce = (25 × 108) / 68 = 39.7 g of H₂O

Thus, the mass of H₂O formed is 39.7 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

How many milliliters of 0.164 M AgNO3 solution are needed to react completely with 76.5 mL of 0.391 M CaCl₂ solution? The net ionic equation for the reaction is Ag (aq) + Cl(aq) → AgCl(s) V(AgNO3) =____mL​

Answers

Answer:

From the balanced net ionic equation, we can see that 1 mole of AgNO3 reacts with 1 mole of CaCl2 to produce 1 mole of AgCl. Therefore, we can use the stoichiometry of the reaction to calculate the amount of AgNO3 needed to react completely with the given amount of CaCl2.

First, we need to calculate the number of moles of CaCl2 in 76.5 mL of 0.391 M solution:

moles of CaCl2 = concentration x volume

moles of CaCl2 = 0.391 M x 0.0765 L

moles of CaCl2 = 0.0299 mol

Since 1 mole of AgNO3 reacts with 1 mole of CaCl2, we need 0.0299 mol of AgNO3 to react completely with the CaCl2. To calculate the volume of 0.164 M AgNO3 solution containing this amount of AgNO3, we can use the formula:

moles = concentration x volume

Rearranging the formula, we get:

volume = moles / concentration

Substituting the values, we get:

volume = 0.0299 mol / 0.164 M

volume = 0.1823 L

Converting to milliliters:

V(AgNO3) = 182.3 mL

Therefore, 182.3 mL of 0.164 M AgNO3 solution are needed to react completely with 76.5 mL of 0.391 M CaCl2 solution.

Can someone please help with this chemistry question

Answers

If 9.7 mol of CO₂ are produced, 14.55 moles of O₂ were reacted.

In chemistry, a mole is a unit of measurement that represents an amount of substance. This number of entities is known as Avogadro's number, which is approximately equal to 6.02 x 10^23.

The mole is a convenient unit for measuring the amount of substance in chemical reactions, because it allows chemists to predict and calculate the quantities of reactants and products involved in a chemical reaction. For example, if we know the balanced chemical equation for a reaction, we can use the stoichiometry of the reaction to determine the amount of reactants needed to produce a given amount of product, or the amount of product that can be produced from a given amount of reactants.

The balanced chemical equation for the combustion of ethylene (C2H4) in oxygen is:

C₂H₄ + 3O₂ → 2CO₂ + 2H₂O

From the balanced equation, we can see that 3 moles of O₂ react with 1 mole of C₂H₄ to produce 2 moles of CO₂. Therefore, the number of moles of O₂ that reacted can be calculated as:

moles of O₂ = (moles of CO₂ produced) × (3/2)

moles of O₂ = 9.7 mol × (3/2)

moles of O₂ = 14.55 mol

Therefore, 14.55 moles of O₂ were reacted.

To learn more about moles from given link

https://brainly.com/question/29367909

#SPJ1

60cm3 of carbon (||) oxide,(co) are sparked with 30cm3 of oxygen if all the volumed of the gases are measured at s.t.p. calculate the volume of the residual gases after sparking​

Answers

Answer:

We can begin by using the balanced chemical equation for the reaction between carbon monoxide and oxygen:

2CO + O2 -> 2CO2

This tells us that 2 volumes of CO react with 1 volume of O2 to produce 2 volumes of CO2. Since we have equal volumes of CO and O2, the limiting reactant will be the one that requires more volume, which is the CO:

2 volumes of CO + 1 volume of O2 -> 2 volumes of CO2

Using the ideal gas law, we can convert the volumes of CO and O2 at STP (standard temperature and pressure, which is 0°C and 1 atm) to moles:

n(CO) = V(CO) / Vm = 60 cm3 / 22.4 L/mol = 0.00268 mol

n(O2) = V(O2) / Vm = 30 cm3 / 22.4 L/mol = 0.00134 mol

Since 2 volumes of CO react with 1 volume of O2, we can say that the reaction will use up 2 x 0.00134 = 0.00268 mol of O2. Since we have 0.00134 mol of O2 initially, this means that all of the O2 will be used up in the reaction, leaving none in the residual gases. The reaction will also produce 2 x 0.00268 = 0.00536 mol of CO2.

Using the ideal gas law again, we can convert the volume of CO2 produced to a volume at STP:

V(CO2) = n(CO2) x Vm = 0.00536 mol x 22.4 L/mol = 0.120 cm3

Therefore, the volume of residual gases after the reaction is:

V(residual) = V(total) - V(CO) - V(O2) - V(CO2) = 90 cm3 - 60 cm3 - 30 cm3 - 0.120 cm3 = 0.880 cm3

(8.2/8.3) types of chemical reactions

Answers

The various types of chemical reaction are Combination Reaction,Decomposition Reaction,Displacement Reaction,Double Displacement Reaction, and Precipitation Reaction.

What is a chemical reaction?

A chemical reaction is defined as the reaction that involves the combination of two or more substances leading to the formation of a new substance called the product of the reaction.

The various types of chemical reaction include the following:

Combination Reaction,Decomposition Reaction,Displacement Reaction,Double Displacement Reaction, and Precipitation Reaction.

There are three parts of a chemical reaction which is the reactant part, the arrow and the product part.

That is;

A. + B ---------> D + E.

Learn more about chemical reaction here:

https://brainly.com/question/29470602

#SPJ1

The first order reaction 3A + 2B + C has rate constant 0. 538 s-1. If the initial concentration of A is 0. 867 mol L

what is the half-life of the reaction, in seconds? Remember to use correct significant figures in your answer.

Answers

the half-life of the reaction is 1.29 s (to three significant figures).

The half-life (t1/2) of a first-order reaction is given by the formula:

t1/2 = ln(2) / k

where k is the rate constant of the reaction.

In this case, the rate law for the reaction is:

rate = k[A]3[B]2[C]

where [A], [B], and [C] are the concentrations of A, B, and C, respectively.

Since the reaction is first order with respect to A, the concentration of A at any time t is given by:

[A]t = [A]0 x

[tex] {e}^{ - kt} [/tex]

where [A]0 is the initial concentration of A.

Given that the initial concentration of A is 0.867 mol/L and the rate constant is 0.538 , we can use the formula for the half-life to calculate the time required for the concentration of A to decrease by half:

t1/2 = ln(2) / k = ln(2) / 0.538 = 1.29 s

learn more about half life here :

https://brainly.com/question/24710827

#SPJ4

based on the appearance of your reaction (aluminum with copper (ii) sulfate) in thebeaker, which reagent do you think was consumed, and which reagent had some left over? explain.

Answers

Based on the appearance of the reaction of aluminum with copper (II) sulfate, the reagent that was consumed was aluminum, and the reagent that had some left over was copper (II) sulfate.

What is aluminum?

Aluminum is a chemical element that has the symbol Al and the atomic number 13. It is a silvery-white, soft, nonmagnetic, ductile metal in the boron group. Aluminum is the third most prevalent element and the most abundant metal in the Earth's crust after oxygen and silicon.

Copper (II) sulfate is a blue solid that is soluble in water. Its appearance is due to the presence of water of crystallization, which occurs in the crystal structure. It is a compound that is commonly used as a fungicide and algaecide because it is toxic to many fungi and algae. Copper sulfate has also been used to treat various diseases.

What happens when aluminum reacts with copper (II) sulfate?

Aluminum replaces the copper ions in copper (II) sulfate and creates aluminum sulfate and copper metal when aluminum reacts with copper (II) sulfate. The chemical reaction between aluminum and copper (II) sulfate is as follows:

Al(s) + CuSO4(aq) ⟶ Al2(SO4)3(aq) + Cu(s)

When aluminum is placed in copper (II) sulfate solution, copper ions from copper (II) sulfate move to aluminum, displacing the aluminum ions in the process. As a result, the copper ions from copper (II) sulfate solution are lowered to metallic copper, and aluminum ions combine with sulfate ions from copper (II) sulfate solution to form aluminum sulfate, which is soluble in water. When copper metal is produced, it forms a brown layer on top of the solution and sinks to the bottom.

Learn more about chemical reaction: https://brainly.com/question/11231920

#SPJ11

How many milliliters of 0. 20 M H2SO4 are

required to completely neutralize 40. ML

of 0. 10 M Ca(OH)2?

Answers

20 mL of 0.20 M H2SO4 is required to completely liquidate 40 mL of 0.10 M Ca (OH)2.

We can use the balanced chemical equation for the neutralization reaction between sulfuric acid (H2SO4) and calcium hydroxide (Ca (OH)2) to determine the stoichiometry of the reaction:

H2SO4 + Ca (OH)2 -> CaSO4 + 2H2O

moles of Ca (OH)2 = Molarity x Volume

= 0.10 mol/L x 0.040 L

= 0.004 mol

moles of solute = Molarity x Volume (in liters)

alter this equation gives:

Volume (in liters) = moles of solute / Molarity

Therefore, the volume of 0.20 M H2SO4 required to supply 0.004 moles of H2SO4 is:

Volume (in liters) = 0.004 mol / 0.20 mol/L

= 0.02 L

Multiplying by 1000 mL/L, we get:

Volume (in mL) = 0.02 L x 1000 mL/L

= 20 mL

To know more about Molarity:

https://brainly.com/question/29802317

#SPJ4

C) Write the formulas and predict the products. Name and Balance the equation Aluminum Phosphite + Copper (ii) Chromate ---→​

Answers

The balanced equation for the reaction would be 2AlPO4 + 3CuCrO4 → Al2(CrO4)3 + 3Cu3(PO4)2.

Equation of a reaction

The formulas of the reactants are:

Aluminum Phosphite: AlPO4Copper (II) Chromate: CuCrO4

The formulas of the products are:

Aluminum Chromate: Al2(CrO4)3Copper (II) Phosphate: Cu3(PO4)2

The balanced equation indicates that 2 moles of Aluminum Phosphite react with 3 moles of Copper (II) Chromate to produce 1 mole of Aluminum Chromate and 3 moles of Copper (II) Phosphate.

Thus: 2AlPO4 + 3CuCrO4 → Al2(CrO4)3 + 3Cu3(PO4)2

More on equations of reactions can be found here: https://brainly.com/question/16921139

#SPJ1

If the solubility of a substance in water is 360 g/L and the molar mass of the substance is 58.5 g/mol. What is the Molarity of the saturated solution? Explain in your own words in complete sentences.

Answers

This means that for every liter of water, there is 6.15 moles of the substance dissolved in it.

What is substance?

Substance is a concept that refers to a physical material or thing that has mass and occupies space. It is a fundamental concept of physics that applies to all physical and visible things in the universe. In philosophy, substance is a primary category of ontology that refers to the physical or material existence of things.

The molarity of the saturated solution can be calculated by dividing the solubility (360 g/L) by the molar mass of the substance (58.5 g/mol).
The molarity of the saturated solution is thus 6.15 mol/L.
This means that for every liter of water, there is 6.15 moles of the substance dissolved in it.

To learn more about substance
https://brainly.com/question/26487468
#SPJ1

Describe how you would obtain pure crystals of sodium chloride from a mixture of solid sodium chloride and solid zinc carbonate

Answers

Answer:

Answer :

The compounds are separated by using a suitable filtration technique.

Explanation:

Explanation:

The compounds are separated by using a suitable filtration technique. NaCl remains in the filtrate, but charcoal remains on the filter paper. Crystals of NaCl can be obtained by the method of evaporation.

Other Questions
EVALUATE THE CURRENT MARKET SIZE AND SHARE OF THE PROCESSED MEAT,SEAFOOD AND ALTERNATIVES TO MEAT IN THE UK SINCE 2021 Sam Tuckerton sells for Fair Designs, Inc. He is on a 4. 5% straight commission with a $1,800 drawing account. If he is paid the draw at the beginning of the month and then sells $125,000 during the month, how much commission is owed to Sam? You have learned that the pressure from a fluid at a certain depth is given by the equation P = gh + Patm. You have also learned that the buoyant force is due to the difference in pressure between the top and bottom of an object. Derive the equation for the buoyant force from these two ideas. (Hint: In your derivation, use a simple submerged object, such as a perfect cube with sides of length s.) (3 points) Police radar guns (Figure 1) work by measuring the change in frequency of a reflected pulse of electromagnetic waves. A gun reads correctly only if a car is moving directly toward or away from the person making the measurement. Combine like terms: -4x+3-7x-8 A. -7x-5 B. -11x-5 C. -3x -11 D. none of the above Father Hidalgo was a Creole. Why do you suppose he got limited support from other Creoles? The exchange of Native American lands in the south for lands in the west is known as Study each picture that depicts the involvement of a particular gland in the endocrine system. Write down the name of the endocrine gland and explain its effect, according to its function. Find the volume of the right circular cone with r=22.1 mm and h=5.91 mm. Hi. I need to know the answer because one of my friends wanted to know the answer and I knew the answer, but not how to explain it well enough: Adrienne and Evelyn have a pet cat. When they got it as a kitten, as much as it it weighed 0.6 kilograms. Now it weighs 7.3 times did when it was a kitten. How much does their cat weigh now? What is the x-coordinate of the midpoint of line segment AB with points A(21, 5) and B(-9, -13). *See image *The number of foxes in a forest increasesby 20% each year.This year, there are 500 foxes in theforest.Calculate the number of foxes that therewill be in the foresta) after 1 year.b) after 2 years. The inconclusive way in which irving writes about mrs. Walker's disappearance demonstrates an element of Examine the scenario below. Determine which foreign policy tool the International Committee of the Red Cross should use to resolve this issue.During a conflict in the Middle East, several towns in Yemen were bombed. Their infrastructure has been completely destroyed and the people living there are having difficulty finding adequate food, water, clothing, and shelter. The ICRC has decided to respond.ResponsesForeign AidTariffAllianceSanction an older adult client with generalized weakness who lives in a two-story home has a bathroom upstairs and a bedroom downstairs. which nursing teaching is appropriate? Imagine your community is considering having a digital only library where all resources are readable online, on computers, and on mobile device stations. Some citizens are concerned about the cost, that not all community members would like using all digital, having property damaged, and teens loitering or behaving inappropriately. Your school counselor has asked you to participate in the discussion as a representative of the student body. You will have five minutes to make a speech to all in attendance at the town meeting and will then sit on a panel to answer questions from the community.Do you agree or disagree with an all-digital library? To prepare for your speech write out two to three reasons why the community should or should not invest in the project, questions that you will need to research to prepare fully, and ways that you would respond to those with an opposite opinion. HEELLPPPP!!!! quickly im being timed. Which is better? 8"A" students out of 40, or 9 "A" student out of 50 Drag and drop each feature into the correct category. to decrease a number by 37% you multiply by 0.63to decrease a number by 16% what do you multiply it by