serenity challenges carlos to come up with a way to use the double-slit experiment to determine the wavelength of monochromatic light. which response is correct?

The claim is refuted -rotation curve 1, -rotation curve 3, -rotation curve 2 -supports Rotation Curve 4, Rotation Curve 6, and Rotation Curve 5

You can work every significant muscle area with Curves since it combines stretching, cardio, and upper- and lower-body strength training routines. It may be done by people of all fitness levels and employs hydraulic resistance gym equipment created specifically for ladies.

Although males are permitted to join in some jurisdictions, Curves fitness and weight reduction facilities are focused solely on and built for women. Competitors of the clubs include Spa Lady and Lucille Roberts, two chains that cater only to women.

To know more about Curves visit:

https://brainly.com/question/28793630

#SPJ4

The maximum height attained by the projectile in terms of h is 12h/7.

The maximum height attained by the projectile is calculated by applying the following formula as shown below.

H = v² sin²θ / 2g

where;

H = ( v² ( sin 60 )² ) / 2g

H = ( v² x ³/₄ ) /2g

H = 3v² / 8g

To solve for the maximum height attained by the projectile in terms of h is calculated as follows;

vf² = vi² - 2gh

2gh = vi² - vf²

h = (vi² - vf²) /2g

where;

h = (v² - (3v/4)²) / 2g

h = (v² - 9v²/16) / 2g

h = (7v²/16) / 2g

h = 7v² / 32g

7v² = 32gh

v² = 32gh/7

The maximum height becomes;

H = 3v² / 8g

H = 3(32gh / 7) / 8g

H = (3 x 32 gh) / (7 x 8g)

H = 12 h / 7

Learn more about maximum height here: https://brainly.com/question/12446886

#SPJ1

The weight of the ball is the only force pushing down on a ball that has been tossed into the air approximately half its maximum height.

At this point, referring to a force as a push or a pull is perfectly appropriate. An object does not "have in it" or "contain" a factorOne thing experiences a force from another. The idea of a force encompasses both living and non-living things.

An illustration would be to push or forcefully shove a door. As a vector quantity, effort has both magnitude and a direction.. According to Newton's second law, force equals the "net of a body's natural mass and acceleration."

To know more about force visit:

https://brainly.com/question/20366971

#SPJ4

The work done on the gas is 2.73 Joules and the change in internal energy of the system is -2.73 Joules.

The monoatomic gas is taken from 7.43L to 3.32L at a constant pressure of 0.293 atm.

(a) The work done for monoatomic gas is,

W = PΔV/(1-y)

P is pressure, V is volume and y is adiabatic constant which is 1.66 for monoatomic gas.

Putting values,

W = 0.293(3.32-7.73)/-0.44

W = 2.73 Joules.

So, the work done in this process is 2.73 Joules.

(b) In this process the change in internal energy is negative to the work done so, Change in internal energy of the system is -2.73 Joules.

To know more about Internal energy, visit,

https://brainly.com/question/25737117

#SPJ4

A convex mirror can never provide more than one in magnification effect. This is so because a convex mirror's image of the thing is smaller than the object itself.

When an object is held 30 cm away from a convex mirror, the image it creates is half the size of the actual object. A convex mirror is a kind of spherical mirror in which the reflecting surface is the protruded portion of the sphere; in other words, the reflecting surface of these mirrors protrudes outward in the direction of the incident light source. Enlarging something's seeming size—rather than its actual size—is known as magnification. A calculated value known as "magnification" is used to measure this enlargement.

Learn more about convex mirror here

https://brainly.com/question/3627454

#SPJ4

The electric power consumed by the household appliance is determined as 22 watts.

The electrical power consumed by the household appliance that is operating on 110 volts and whose electricity is flowing with a current of 0.2 amperes is calculated as follows;

P = IV

where;

P = 0.2 A  x  110 V

P = 22 W

Thus, the electric power consumed by the household appliance is a function of current and voltage.

Learn more about electric power here: https://brainly.com/question/1125269

#SPJ1

The work done by a constant force f with arrow on a particle during a straight-line displacement d with arrow if the angle between f with arrow and d with arrow is 27° is positive.

Paintings done are elaborated in one way it consists of both forces exerted on the frame and the whole displacement of the frame. This block is preceded via a steady pressure F. The cause of this force is to move the frame a sure distance d in a direct route in the direction of the force.

To express this concept mathematically, the paintings W is identical to the pressure f times the gap d, or W = fd. If the force is being exerted at an attitude θ to the displacement, the paintings completed is W = FD cos θ.

The paintings accomplished through pressure are described to be the product of thing of the pressure inside the route of the displacement and the value of this displacement. formula. work can be calculated with the aid of multiplying force and Distance in the route of pressure as follows. W = F × d.

Learn more about work done here:-https://brainly.com/question/18363506

#SPJ4

Throughout the process, from a finite time before the collision to a finite time after the collision, the angular momentum of the rod and puck system is constant about any fixed point in space.

The condition of conservation of angular momentum of a system about a point is that net torque about that point of the system must be zero. The point that has zero net torque is any fixed point in space.

τ = I α

I = L / ω

τ = L ω / ω t

τ = L / t

Since L is constant, τ = 0

To know more about conservation of angular momentum

https://brainly.com/question/1597483

#SPJ4

The velocity of the wave is 10m/s .

A wave's velocity is determined by multiplying its frequency by its wavelength. The wavelength of a wave is defined as the space between two successive crests or troughs, and the frequency is the reciprocal of the wavelength in time.

We are given that,

The distance between two consecutive wave = λ = 5cm

The no. of waves = n = 2

The velocity of the wave can be calculated by the formula,

ν = nλ

v = 2 ×​ 5 = 10cm/sec

Therefore the velocity of the wave would be 10 m/s .

To know more about wave

https://brainly.com/question/28277521

#SPJ4

As stated in the query, 14.57 m/s is the velocity at which one would go after descending 10 m in height.

A Frictionless Guest Experience: What Is It? Any stage in a customer's relationship with a business where they experience friction is when they run into a roadblock that brings them down or makes them unhappy. Customer gives seamless service, in the simplest fundamental way, entails monitoring their path and improving their encounter.

Here we can use the concept of mechanical energy conservation

Ui + KEi = Uf + KEf

mgh₁ + 1/2 mv²i = mgh₂ + 1/2 mv²f

Now we know that,

vi = 4m/s

m = 60kg

h₁ = 0m

h₂ = -10m As its going down

now from above equation we will have

n + 1/2(60)(1)² = (60)(9.81)(-10)+1/2(60)v²f

180 = -5886 + 30v²f

v²f = 212.2

vf = 14.57m/s

So his speed will be 14.57m/s

To know more about Frictionless visit:

https://brainly.com/question/11289241

#SPJ4

The kinetic energy of the two particles will be equal if they are travelling at the same speed in a vacuum. The equation: gives the particle's kinetic energy.

KE = (1/2)mv^2

m is the particle's mass, v is its speed, and KE is its kinetic energy.

In this instance, the particle with mass m will have the following kinetic energy:

KE = (1/2)m*v^2

And the kinetic energy of the particle with mass 3m will be:

KE = (1/2)3mv^2

     = (3/2)mv^2

The two equations may be made to equal one another and we can solve for v because the particles have the same kinetic energy.

(1/2)mv^2 = (3/2)mv^2

(1/2)*v^2 = (3/2)*v^2

1/2 = 3/2

Since there is no solution to this equation, two particles travelling in a vacuum cannot be moving at the same speed if one of them has a mass.

To know more about Kinetic energy visit:

https://brainly.com/question/26472013

#SPJ4

In water that was 22 °C in temperature, a tablet took an average of 28.3 seconds to dissolve.

Drugs are any chemicals that have an impact on how living creatures and the microbes that infect them (such as bacteria, fungi, and viruses) operate. The study of pharmaceuticals, or pharmacology, covers all facets of a drug's use in medicine, such as its mechanism of effect, physical & chemical characteristics, metabolism, treatments, and toxicity.

A drug is any substance that, when eaten, affects an organism's physiology or psychology. Foods and other items that aid in nourishment are typically kept apart from medications. Drugs can be ingested orally, smoked, injected, inhaled, applied topically with a patch and suppository, or broken down sublingually.

To know more about drug, visit:

https://brainly.com/question/20083654

#SPJ1

Answer:

51 seconded

Explanation:

If this glass is heated ice will turn into water

Explain forms of water.

Ice, water, and gas are all forms of water that can exist (vapour or gas). Ice, a solid, can melt into water with the addition of heat (a liquid). Ice forms when heat is removed from water, a liquid (a solid). We refer to a shift in a substance's state as occurring when liquid water becomes a solid or a gas. The molecules of the water don't change, even when its physical appearance does.

Solid water is what an ice block is. The ice turns into liquid water when heat (an energy source) is introduced. It's melted since it's at 0 degrees Celsius. If you keep heating the water, it will transform into water vapour, which is water that has turned gaseous.

To learn more about forms of water use link below:

https://brainly.com/question/28166145

#SPJ4

The force that the gas applies to the container boundaries is known as the gas's pressure. Along the given volume, the gas molecules move at random.

They bump into the ground and each other as they move. The pressure of a gas is therefore a measurement of the average linear momentum of the moving molecules in a gas because the impact of each individual gas molecule is too minute and challenging to observe. The pressure exerted on the wall is normal to it and acts perpendicularly; the gas's viscosity affects the force's tangential (shear) component.

The quantity of gas particles, the capacity of the container, and the temperature of the gas all affect how much pressure is applied to a contained gas. The pressure will rise as the volume of gas particles in a container increases. The pressure will rise as a container's volume increases.

To learn more about pressure of the gas refer to:

https://brainly.com/question/29321317

#SPJ4

The radius of the alpha particle's trajectory is 4.0 r.

An elastic collision is one in which the system does not experience a net loss of kinetic energy as a result of the collision.

Given:  the mass of the alpha particle is four times that of the proton, and its charge is twice that of the proton.

After elastic collision, the speed of the  proton and the alpha particle will be in a ratio of 2: 1.

Let, the speed of the proton be2 v then the speed of the alpha particle be v.

So, the proton's trajectory is = 2mv/qB = 4.0 r

Hence, alpha particle's trajectory is = (4m×v)/(2qB)

=2mv/qB  

=4.0 r

= 4.0r.

Learn more about  elastic collisions here:

https://brainly.com/question/12941951

#SPJ1

Yes this information is correct about electrical resistance.

Electrical resistance is a force that counteracts the flow of current.

Sol- when two lamps are connected in parallel to a battery, the total electrical resistance that the battery senses is more than the resistance of either . Beacuse In a parallel circuit each bulb is in its own circuit. As bulbs are added the resistance in the circuit decreases since each circuit is another pathway for electrons to move from one end of the circuit to the other.when two lamps are connected in series to a all the  battery the electricals resistance that the battery's senses is the more than the resistence of either lamp.

As each bulb is connected in parallel to the battery of the , each has thatbsame potential difference across by to the it as the all of  voltage of across the battery of to the terminals. All of other to the potential by  differences are zero, as we know all the wires have to the zero resistance.

To know more about electrical resistance click-

https://brainly.com/question/24136694

#SPJ1

The stated statement states that the molecules' final maximum rate of translation is 270 m/s.

The rate at which the position of an object shifts in any direction. Speed is described as the ratio of the area traveled to the time required to cover that distance. Time is a scalar number since it just has a heading but no magnitude.

temperature at the start = T

v = √(3RT/M) = 467 m/s

temperature = T' later

note PV = mRT/M = NRT/NA

so NT = constant,

now N is tripled, T reduces to T' = T/3

so v will change to v' = √(3RT'/M) = v*√(T'/T) =v*√(1/3) = 270 m/s

To know more about Speed visit:

https://brainly.com/question/24116470

#SPJ4

There are 10 identical machines could you add to the factory without exceeding the 85 dB limit.

Calculation:-

sound leve in decibel is:

β dB = 10 log ( I / Io )

where I is the intensity of sound

It is the relative intensity

72 = 10 logs ( I /10⁻¹²)

8  = log ( I /10⁻¹²)

10⁸  =  I / 10⁻¹²

I  =  10⁸ . 10⁻¹² =  10⁻⁴  W /m2

If the sound level is 85 dB, the number of identical machines is n.

85 = 10 logs ( n I / Io )

=  10 logs ( n . 10⁻⁴ / 10⁻¹² )

9  =  log ( n . 108 )

10⁹ = n. 10 8

n = 10.

so  n  = 10 .

Sounds below 70 dB are considered safe for hearing. This is the sound of a normal conversation between two people. A noise level of 80 or 85 dB will damage your hearing over time. 70 decibels is as loud as a washing machine or dishwasher. Medium noise level. 70 dB of noise is not considered harmful to human hearing.

Learn more about The sound level here:- https://brainly.com/question/17062836

#SPJ4

The statement that best describes the after effect of the ball is that the ball would be Less than 60 centimeters, as the ball transforms a part of its potential energy into heat energy. That is option A.

The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.

There are various types of energy which include the he following:

Potential energy is defined as the type of energy that is found in the body that is at rest. Therefore when the ball is dropped from a height, it would bounce with less than 60 centimetres as the potential energy is transformed to heat energy.

Learn more about energy here:

https://brainly.com/question/25959744

#SPJ1

To find maximum spring compression we assume no energy losses due to friction.

Here, the initial and final kinetic energy of the car is zero.

We know that, Total Energy= kinetic energy+ Potential Energy

Since the initial and final kinetic energy of the car is zero, here initial potential energy of the car-spring-earth system completely converts to elastic potential energy.

By the law of conservation of energy,

K1 +U1 = K2 + U2

i.e, (KE+PE, + PE) = (KE + PEg+PES) =

Here KE=0 and Potential energy after reaching ground(PE, = 0) =  

0 + mgh + 0 = 0+0+1/2kx- 0

mgh = (1/2kx2) =

2= 2mgh/k

mg = 1325.(9.8) = mg = 1325.(9.8) = 12985N ) = =

We can round off 12985N to 13000N for easy calculation.

-2 2 = 2 * 13000 * 10 1.0 * 106 0.51m

(b) To find the maximum acceleration of the car after contact with the spring,

We apply Newton's 2nd law,

ma= (-kx = )

​​​​​​a = (-kx/n -m)  

Multiply the above equation with g/g

a = a= (-kug/mg) = (-kxg/u

a = -(1.0 * 10%) * (0.51) * (9.8)/13000 = -380m/s? = *

a = 380m/s

A level curve is a plane curve where f has a constant value. A plane is a surface in XYZ space where f has a constant value. A level curve or surface is sometimes called a level set. The plane is the equipotential surface of the Earth's gravitational field. It is a curved surface and all its elements are perpendicular to the vertical line.

Learn more about Level surface here:-https://brainly.com/question/17183676

#SPJ4

The overall momentum of the system can be thought of as being conserved because the total momentum before and after the collision is the same. As a result, the system receives no net external impulse.

Momentum is a vector quantity that is influenced by the object's direction. During collisions between objects, momentum is a relevant concept. The total momentum before a collision between two objects equals the total momentum after the impact (in the absence of external forces).

The law of conservation of momentum is this. It holds true in every collision. According to the principle of momentum conservation, momentum is only modified by the action of forces as they are outlined by Newton's equations of motion; momentum is never created nor destroyed inside a problem domain.

For more questions like Momentum click the link below:

https://brainly.com/question/14283213

#SPJ4

The spacing between the lines is 3.33 X 10⁻³ mm and the estimated uncertainty in the line spacing is 3.33 X 10⁻⁵ mm.

Diffraction grating = 300 lines/mm

Thus,

The spacing between the lines = d =

= d = 1/300 lines/mm

= d = 3.33 X 10⁻³ mm

A grating consists of many slits, or lines, close together. In a grating, the spacing between adjacent lines is constant. Gratings are also used to produce interference patterns. When waves are incident on a grating all of the lines act as coherent sources of the waves.

Now, the uncertainty in the lines spacing is = Δ d =

= Δd = d (tolerance)

= Δd =  3.33 X 10⁻³ X 1%

= Δd = 3.33 X 10⁻⁵ mm

To know more about Diffraction Grating:

https://brainly.com/question/3340984

#SPJ4

The rate constant for radon-220, which has a half-life of 55. 6 seconds is 0.012.

We know that half life of first order reaction is : [tex]t_{1/2} = 0.693/k[/tex]

where k = rate of reaction.

Given half life = 55.6 sec

Putting this value in above equation we get k = 0.012

i.e. The rate constant for radon-220, which has a half-life of 55. 6 seconds                is 0.012.

To know more about radioactivity visit:

https://brainly.com/question/20039004?

#SPJ4

Among irregular galaxies, the large and small magellanic cloud are useful for astronomers to study because they are very close to us.

The Milky Way's satellite galaxies are the Large and Small Magellanic Clouds. They are large, misty blobs of light that stand out against the night sky as some of the nearest galaxies to our home galaxy.

According to estimates, there are about 3 billion stars in the Small Magellanic Cloud and 30 billion stars in the Large Magellanic Cloud.

The Large and Small Clouds are thought to have originated between 12 and 13 billion years ago, at around the same time as our Milky Way.

Great galactic tides may have shaped them irregularly due to their repeated interactions with the larger Milky Way galaxy.

Can learn more about irregular galaxies from: https://brainly.com/question/1241789

#SPJ4

Two units of measurement for energy are calories and joules. The measurement of 355 J is the same amount of energy as 84.84 calories.

Energy in physics is the ability to perform work. Different shapes, such as potential, kinetic, thermal, electrical, chemical, radioactive, etc., may be assumed by it. Other examples of energy being transferred from one body to another include heat and work. Energy is always distributed after it has been transported in accordance with its type. Thus, heat transfer could result in thermal energy, whereas work could result in mechanical energy.

Motion is a trait shared by all forms of energy. For instance, if a body is moving, it has kinetic energy. Due to the object's design, which incorporates potential energy, a tensioned object, like a spring or bow, has the ability to move even when at rest.

To know more about  energy visit : brainly.com/question/1932868

#SPJ4

36.99N

Given

Maximum blood pressure  P = 150 mm

Effective area of the aneurysm a = 18.5 cm2.

Expression for the maximum force exerted by blood on an aneurysm is,

f =P * a = (150 mm Hg* (133.322 N/m²/ 1 mmHg)) * ( 18.5 cm² * (1 m² /10000cm²)) = 36.99N

The pressure is computed as the ratio of acting force on an object and the surface area of the object where the force is directed. The pressure is usually measured in terms of Pascal and blood pressure in mm of Hg.

find more:-https://brainly.com/app/ask?q=calculate+the+maximum+force%2C+in+newtons%2C+exerted+by+the+blood+on+an+aneurysm+%28a+ballooning+in+a+major+artery%29%2C+given+that+the+effective+area+of+the+aneurysm+is+18.5+cm2.

#SPJ4

-0. 833m/s is the velocity of the centre-of-mass of this system, prior to the collision.

What is Centre-of-mass?

The unique location where the weighted relative position of the distributed mass accumulates to zero is known as the centre of mass of a distribution of mass in space (also known as the balance point). At this location, a force can be applied to produce a linear acceleration alone, not an angular acceleration.

What is Collision?

In physics, the abrupt, violent meeting of two bodies in direct contact is referred to as an impact. Examples of such bodies are two pool cues, a golf club and a ball, a hammer and a nail head, two railroad cars when linked, or a falling object and a floor. The force and the amount of time the objects are in touch, in addition to the materials the two objects are made of, have an impact on the outcome of the impact. It is generally knowledge that a hard steel ball dropped on a steel plate would rebound almost to the original position from where it was dropped, while a ball made of putty or lead will not.

What are the Calculations?

There are typically 3 masses named

m1= 3.38kg

m2= 0.702kg

m3= 7.80kg

Here m2 stays stationary hence its velocity (v2= 0)

Let the final velocity be V

Value of m1 + m2 + m3 = 3.38 + 0.702 + 7.8 = 11.882kg

A/Q V= m1v1/11.882 + m2v2/11.882 + m3v3/11.882

m1v1/11.882= 3.38 * 3.51/11.882= 0.998

m3v3/11.882= 7.8 * (-2.79) /11.882= -1. 831 ( here -ve sign is taken as the velocity of m3 is towards the left which is negative)

Hence, after simplifying V= m1v1/11.882 + m2v2/11.882 + m3v3/11.882 the final answer is -0. 833m/s

To know more about the Centre of mass, check out:

https://brainly.com/question/17088562

#SPJ4

To protect you from overhead power lines:

Keep a safe distance away from lines when working.

Ask the power company to ground and de-energize the electrical lines.

The only way to avoid being electrocuted is to wear PPE.

Have insulated sleeves, commonly referred to as "eels," installed over electricity wires by the utility provider.

What exactly do overhead power wires mean?

To carry electrical energy across long distances, an overhead power line is a structure used in electric power transmission and distribution. For three-phase power, it typically consists of one or more uninsulated electrical cables suspended from towers or poles.

The more precautions taken, the better in order to prevent the employee from being electrocuted by the electricity lines. The safety of the personnel must be ensured by taking all necessary precautions. Particularly when it comes to electrical wiring, problems might arise in a variety of ways.

To know more about overhead power wires  use link below:

https://brainly.com/question/13489356

#SPJ4

The resistance in a series rcl circuit is doubled.:

(a) The resonant frequency will decrease. The resonant frequency of an RLC circuit is inversely proportional to the total resistance. As the resistance increases, the total resistance increases and the resonant frequency decreases.

(b) The maximum current in the circuit will remain the same. The maximum current in an RLC circuit is determined by the magnitude of the source voltage and the total resistance. As the resistance increases, the total resistance increases, but the source voltage remains the same, so the maximum current remains the same.

What is resistance?
The opponents to current flowing through an electrical circuit is measured by resistance. The Greek letter omega (Ω) represents the unit of measurement for resistance, known as ohms. Georg Simon Ohm (1784–1854), a German physicist who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance. Ohm's Law is attributed to him as its creator.

To learn more about resistance
https://brainly.com/question/24179042
#SPJ4

A permanent magnetic substance be called a hard magnet.

Option C is correct.

Hard magnets, also referred to as permanent magnets can be described as those magnetic materials that retain their magnetism after being magnetized.

Examples of magnet function include the following:

Learn more about hard magnets at:  https://brainly.com/question/14256749

#SPJ1