Serena mixed two samples together: a gray solid that smells like flowers and a gray solid that smells like bleach. She analyzed the results and found two ending substances. One of the ending substances was a white solid. This ending substance is made up of the repeating group of atoms shown above. Which of the diagrams to the left shows the repeating groups of atoms that make up the samples Serena mixed together?

Answers

Answer 1

The diagrams that shows the repeating groups of atoms that make up the samples which were mixed together is option D.

A chemical reaction is said to have occurred when there a rearrangement of atoms in a substance. This rearrangement of atoms in the substance leads to the formation of new substances.

In this case, we must note that the combination of reactants to be chosen must posses the atoms shown as part of the one of the end substance. The only option that satisfies this requirement is option D.

Learn more about chemical reaction: https://brainly.com/question/6876669

Serena Mixed Two Samples Together: A Gray Solid That Smells Like Flowers And A Gray Solid That Smells
Answer 2

Answer:D

Explanation:DDDDD


Related Questions

Check the box under each molecule in the table below that is an isomer of this molecule:

Answers

The branched alkanes in boxes two and three all have molecular formula C6H14 and are isomers of the compound shown.

Isomers are compounds that has the same molecular formula but different structural formulas. Hence, isomers of compounds can be represented by the same molecular formula since they contain the same number of each atom.

The molecule shown has molecular formula C6H14. The branched alkanes in boxes two and three all have molecular formula C6H14 and are isomers of the compound shown.

Learn more about isomers: https://brainly.com/question/1558338

How is a mixture different from a compound?

Answers

Answer:

A compound is something like atoms coming together as a team, and a mixture is 2 or more substances mixing together.

Explanation:

I think a compound is something that is permanently together and a mixture is something you mix yourself ❤️

Why is the same type of nail used in all test tubes? ​in every experiment done to show how rusting works and in what conditions.

Answers

in test tube 1 iron nail gets both air and moisture which is required for rusting. ... in the test tube 3 iron nail is not rusted because of the calcium chloride which is moisture absorber. hence nail would not get moisture for the rusting.

The valence electrons of a krypton (Kr) atom in the ground state are located in the


A. first energy level (shell).

B. second energy level (shell).

C. third energy level (shell).

D. fourth energy level (shell).

Answers

Answer:

D

Explanation:

The valence electrons are the outer electrons and must be located in the outermost shell. In this case, D.

if one gram of sulphur dioxide contains x molecules what will be the number of molecules in 1g of methane

Answers

The ratio of molecules in sulphur dioxide and methane will be the same as the ratio of their moles. So, first of all we should find out the number of moles of sulphur dioxide in 1 gram of sulphur dioxide in 1 gram of sulphur dioxide, and the number of moles of methane in 1 gram of methane. This can be done as follows :

(i) The molecular formula of sulphur dioxide is [tex]SO_{2}[/tex]

So, [tex]1[/tex]  mole of [tex]SO_{2}[/tex] = [tex]Mass[/tex] [tex]of[/tex] [tex]2'O'[/tex]

[tex]=32+2*16[/tex]

[tex]= 64[/tex] grams

Now, [tex]64g[/tex] of sulphur dioxide [tex]= 1[/tex] mole

So, [tex]1g[/tex] of sulphur dioxide = [tex]\frac{1}{64}[/tex] mole

Thus, we have [tex]\frac{1}{64}[/tex] mole of sulphur dioxide and it contains molecules in it. Now, since equal moles of all the substance contain equal number of molecules, therefore, [tex]\frac{1}{64}[/tex] mole of methane will also contain x molecules of methane.

(ii) Molecular formula of methan is [tex]CH_{4}[/tex]

So, 1 mole of [tex]CH_{4}[/tex]  = Mass of C + Mass of 4 H

[tex]=12+4*12[/tex]

Now, 16g of methane = 1 mole

So, 1 g of mathane = [tex]\frac{1}{16}[/tex] mole

We know that:

[tex]\frac{1}{64}[/tex] mole of methane contains = x molecules

So, [tex]\frac{1}{16}[/tex]  mole of contains will contain =[tex]\frac{x*64}{16}[/tex] molecules

=[tex]4x[/tex] molecules

*WILL GIVE BRAINLIEST* Which of the following best approximates the percentages of sand, clay, and silt in a sandy loam? Use the soil texture table below to answer.

A. Sand 40
Clay 30
Silt 30

B. Sand 60
Clay 10
Silt 30

C. Sand 20
Clay 60
Silt 20

D. Sand 25
Clay 15
Silt 60

Answers

B
Answer: The answer is B

Pls help plz answer this question

Answers

Answer:

A) Carbon dioxide and Oxygen

Explanation:

Percentage of gases in the Planet's atmosphere:

Carbon dioxide = 4 % Nitrogen = 72 % Oxygen = 24 %

Percentage of gases in the Earth's atmosphere:

Carbon dioxide = 0.036 % (traces)Nitrogen = 78 % Oxygen = 21 %

___________________

On observing the percentage composition of the atmospheres of the two Planets, we get:

The newly discovered planet has more percentage of Oxygen than The Earth. Percentage of Carbon dioxide is more in the planet than in the EarthNitrogen is less in the planet than in the Earth.

___________________

Answer:

What's asked is the name of the gases that are in higher amounts in the atmosphere of the newly discover planet

Therefore,

A) Carbon dioxide and Oxygen

Will the following replacement reaction occur? MgCl2 + I2 → ?
Yes, it will because chlorine is less reactive than iodine.
No, it will not because iodine is less reactive than chlorine.
No, it will not because iodine and chlorine will not bond.
Yes, it will because the iodine will replace the magnesium.

Answers

The replacement reaction will not occur because iodine is less reactive than chlorine.

REPLACEMENT REACTION:

A replacement reaction is a type of reaction in which one element is replaced by another in a compound.

The principle behind one element replacing the other is based on the reactivity of an element. A more reactive element will displace a less reactive one.

According to this question, the following displacement reaction is given: MgCl2 + I2 → ?

This reaction will not occur because chlorine is more reactive/electronegative than iodine, hence, iodine cannot displace it.

Learn more about replacement reaction: https://brainly.com/question/8625202?referrer=searchResults

A sample of N2O gas has a density of 2.95 g/L at 298 K. What must be the pressure of the gas?

Answers

[tex]\huge{\underline{\underline{\boxed{\sf{\purple{ǫᴜᴇsᴛɪᴏɴ}}}}}}[/tex]

A sample of N2O gas has a density of 2.95 g/L at 298 K. What must be the pressure of the gas?

[tex]\huge\fcolorbox{aqua}{lime}{Answer}[/tex]

P = 1203 mm Hg

[tex]\huge{\underline{\underline{\boxed{\sf{\purple{Explanation}}}}}}[/tex]

#Given: -

p = 2.85 g/L

T = 298 K

# Solution :-

According to ideal gas equation -

➡PV = nRT

➡PV = (W/M)RT

➡PM = (W/V)RT

➡PM = PRT

➡P = pRT/M

➡P = 2.85 × 0.082 x 298 / 44

➡P = 1.583 atm

➡P = 1.583 × 760

➡P = 1203 mm Hg

Therefore, pressure of the gas. must be1203 mm of Hg.

Hope this helps you:)

No matter what container it is in, a liquid usually:
A.has the same volume
B.has a different volume
C.has the same shape
D.has a different color

Answers

Answer:

A

Explanation:

A liquid will will have the same color, it will not have the same shape and its volume will always be constant because you are not creating mass.

Hope this helps!

what happens when you combine hydroxide, chlorine, and 2 drops of h2o

Answers

Answer:

Chlorine will react in water to form hypochlorous acid, which can then dissociate into hydrogen and hypochlorite ions, according to Eqn (1). This reaction is very important, as the disinfecting power of HOCl, hypochlorous acid, is about 40–80 times that of OCl−, hypochlorite.

Explanation:

CARRY ON LEARNING

AND REMEMBER DO ALWAYS READ AND WRITE


Help i dont get it

Answers

Answer:

2. Products; FeCl2 and H2S

Reactants; FeS and HCl

3. a) 36g of water

b) 64g of oxygen

The diagram below shows the reaction between iron oxide and carbon that produces iron and carbon dioxide. The reaction takes place in a closed system. What is true about the carbon atoms in the reaction? A. The mass of carbon atoms in the reactants is the same as the mass of carbon atoms in the products. B. The total mass of the carbon atoms is the same as the total mass of the iron atoms. C. The mass of the carbon atoms increases between the reactants and the products of the reaction. D. The total mass of the carbon atoms is the same as the total mass of the oxygen atoms.

Answers

Answer:

A

Explanation:

The trick here is to know what the conservation of mass means.

It means that no matter what happens and how much change there is, the mass of the carbons on the reactants = the mass of the carbons on the products.

That's exactly what A says.

Alguien saber esto? Literal no se este material

Answers

Answer:

2. 389.15K , 3. 229.15K

Explanation:

K-273.15 = °C

In which case would recalibrating a thermometer be an important next step in an experiment dealing with boiling points?
A) The results of several trials are all very close to each other, but they are noticeably different from the accepted value for the boiling point.

B) A small number of trials are conducted, with results quite different from each other, and with an average that is noticeably different from the accepted value.

C) A single trial is conducted, and the result is very close to the accepted value of the boiling point.

D) The results of several trials vary by a large amount, but the average is close to the accepted value for the boiling point.

Answers

I believe the answer would be D

At what stage of development are fish the most vulnerable?

Answers

Answer:

child stage.

Explanation:

they are more vubnlerabke at that stage

Use the heat equation to find out how many joules of energy are needed
to raise the temperature of 67 grams of water form 20°C - 45°C. What is the
answer in kilojoules?
(specific heat of water is 4.2 J/gºC.)

Answers

Answer:

About 7.0 × 10³ J or 7.0 kJ

Explanation:

We want to determine the amount of energy needed to raise the temperature of 67 grams of water from 20°C to 45°C.

We can use the heat equation:

[tex]\displaystyle q = mC\Delta T[/tex]

Where C is the specific heat of water.

Substitute and evaluate:

[tex]\displaystyle \begin{aligned} q & = (67\text{ g})\left(\frac{4.2\text{ J}}{\text{g-$^\circ$C}}\right)\left(45^\circ \text{ C}- 20.^\circ\text{ C}\right) \\ \\ & = (67\text{ g})\left(\frac{4.2\text{ J}}{\text{g-$^\circ$C}}\right)(25^\circ \text{ C}) \\ \\ & = 7.0\times 10^3 \text{ J}\end{aligned}[/tex]

Recall that there are 1000 J in a kJ. Hence:

[tex]\displaystyle \begin{aligned} q & = 7.0\times 10^3 \text{ J} \cdot \frac{1\text{ kJ}}{1000\text{ J}} \\ \\ & = 7.0 \text{ kJ}\end{aligned}[/tex]

In conclusion, it will take about 7.0 × 10³ J or 7.0 kJ of energy to raise the temperature of 67 grams of water from 20 °C to 45 °C.

Identify the unit that is used for atomic masses

Answers

Answer:

Explanation: Atomic weight is measured in atomic mass units (amu), also called daltons.

What is the correct form of the equilibrium constant for the reaction of hydrogen and oxygen to form water? The equation is:

2H 2( g) + O 2( g) ⇌ H 2O( g)


Kc = ([H2O]/[O2] [H2])

Kc = ([H2O]/[O2] [H2]2)

Kc = ([H2O]/[O2] [H22])

Kc = ([H2O]2/[O2] [H22])

Kc = ([H2O]/[O2] [2H2])

Answers

Kc = ([H2O]/[O2] [H2]2

Nitrogen H2 has :

a)Double bonds

b)Bounded by 6 electrons

c) The bond is ionic

d) Can forms der Waals bonds

e) B& d​

Answers

Answer:

the bond is ionic

Explanation:

the weak base ionization constant (ka) for h2c2o4 is equal to what?

Answers

The acid ionization constant is the quantitative measure of the acidic strength. For oxalic acid, Ka = [H⁺] [HC₂O₄⁻] / [H₂C₂O₄]

What is acid dissociation?

Acid dissociation (Ka) is the ratio of the concentration of the conjugate base and hydrogen ion to the concentration of the chemical.

Oxalic acid is a weak acid and gets dissociated as:

H₂C₂O₄ ⇌ H⁺ + HC₂O₄⁻

or

HC₂O₄⁻ ⇌ H⁺ + C₂O₄²⁻

The acid ionization constant for the reactant and the product is given as:

Ka = [H⁺] [A⁻] / [HA]

Ka = [H⁺] [HC₂O₄⁻] / [H₂C₂O₄]

Therefore, the ionization constant for oxalic acid is given as Ka = [H⁺] [HC₂O₄⁻] / [H₂C₂O₄]

Learn more about acid ionization constant here:

https://brainly.com/question/24132247

#SPJ1

1. How does the figure below illustrate Hund's rule?

Answers

Answer:

it indicates that the lower orbitals are filled first and they have the maximum number of electrons compared to the higher orbitals

How many valence electrons are there in the molecule CH3OCH2CH3.

Answers

Answer:

There are 27 Valence electrons : )

4+1+1+1+6+4+1+1+4+1+1+1 is 27

Explanation:

There are a total of [5×1]+[2×4]+[7]=21[5×1]+[2 × 4 ] + [ 7]=21 valence electrons

find the molar mass of 8.54 x 10²⁴ g A₂O₃​

Answers

The molar mass of 8.54x 10²⁴ g A₂O₃

Answer Sorry but i don't know.

Very Very sorry

napthalene combustion can be used to calibrate the heat capacity of a bomb calorimeter The heat of combustion of naphthalene is -40.1kj/g. When .8210g of naphthalene was burned in a calorimeter containing 1,000g of water, a temperature rise of 4.21C was observed. What is the heat capacity?

Answers

A bomb calorimeter with a heat capacity of 3.63 kJ/°C experiences a temperature rise of 4.21 °C when .8210 g of naphthalene is burned.

The combustion of naphthalene is used to calibrate the heat capacity of a bomb calorimeter.

What is a bomb calorimeter?

It is a device used to measure the change in the internal energy of a reaction.

To determine the heat capacity of the calorimeter (C), we need to follow a series of steps.

Step 1: Calculate the heat released by the combustion.

The heat of combustion of naphthalene is -40.1kJ/g and .8210g were burned.

Qcomb = -40.1kJ/g × .8210g = -32.9 kJ

Step 2: Determine the heat absorbed by the bomb calorimeter.

According to the law of conservation of energy, the sum of the heat released by the combustion and the heat absorbed by the bomb calorimeter is zero.

Qcomb + Qbomb = 0

Qbomb = -Qcomb = 32.9 kJ

Step 3: Calculate the heat capacity of the bomb calorimeter.

32.9 kJ were absorbed, part by the calorimeter itself and part by the 1,000 g (m) of water, whose specific heat capacity (c) is 4.18 J/g°C.

A temperature rise (ΔT) of 4.21 °C is observed. We can determine the heat capacity of the bomb calorimeter (C) using the following expression.

Qbomb = Qcal + Qwater

32.9 kJ = C × ΔT + c × m × ΔT

32.9 kJ = C × 4.21 °C + (4.18 × 10⁻³ kJ/g.°C) × 1,000 g × 4.21 °C

C = 3.63 kJ/°C

A bomb calorimeter with a heat capacity of 3.63 kJ/°C experiences a temperature rise of 4.21 °C when .8210 g of naphthalene is burned.

Learn more about the bomb calorimeter here: https://brainly.com/question/9360310

How many teaspoons are equal to 1 mole of water if there is 0.23 teaspoon for every 1 g?
A. 0.46 teaspoon
B. 3.68 teaspoons
C. 4.14 teaspoons
D. 18 teaspoons

Answers

Answer:it's b hope that help

The molar mass of water is 18 g. Given that there are 0.23 teaspoon for every 1 g. Thus , for 18 g there would be 4.14 teaspoons.

What is one mole?

Any substance that contains  6.022 × 10²³ number of atoms is called one mole of that substance. The mass of a compound or molecule containing these much atoms is called its molar mass.

Molar mass of water is 18 g. Thus, it means that one mole of water weighs 18 g. Given that for every 1 g of water there are 0.23 teaspoon. Thus, number of teaspoons for one mole or 18 g of water is:

number of teaspoons = 18 g × 0.23  /1 g

                                    = 4.14 teaspoons.

Therefore, 4.14 teaspoons are required for one mole of water.

To find more on molar mass, refer here:

https://brainly.com/question/12127540

#SPJ6

A quantity of 1.922 g of methanol (CH3OH) was burned in a constant-volume bomb calorimeter. Consequently, the temperature of the water rose by 4.20 Ce … lsius. If the heat capacity of the bomb plus water was 10.4 kJ/degree Celsius, calculate the molar heat of combustion of methanol

Answers

The formula for calculating the amount of energy or heat released is:

ΔH = C ΔT

where ΔH is heat of combustion, C is heat capacity, while ΔT is change in temperature

ΔH = 8.69 kJ / °C * (5.14°C)

ΔH = 44.67 kJ

Then we calculate the moles of CH3OH which has molar mass of 32.04 g/mol:

moles = 1.922 / 32.04 = 0.05999 mol

SO the molar heat of combustion is:

ΔHm = 44.67 kJ / 0.0599875 mol

ΔHm = 744.60 kJ / mol

I don’t wanna fail if you know the answer pls help me :(

Answers

Answer:

liquid and gas........................

What is the pH when 30.0 ml of 0.005 M HF is mixed with 15.0 ml of 0.01 M NaOH?​

Answers

Answer:

7.36

Explanation:

my teacher said that was the right answer

what percentage of oxygen is attributed fossil fuel combustion


A.43%


B.77%


C.4%


D.17%

Answers

Answer:

C. 4%

Explanation:

The answer is 4%

Other Questions
Which of the following statements is NOT true of a hypoosmotic solution?A. It is also known as a hypotonic solution.B. There are more dissolved solids within the cell than outside thecell.C. It may cause water to move into the cell, which will cause it toswell.D. It may cause the cell to shrink or crenate. True and False:1. (______) Fungi and bacteria are both prokaryote organisms2. (______) Some Fungi reproduce both sexually and asexually.3. (______) Saccharomyces cerevisiae reproduce sexually by budding. 4. (______) Lactophenol cotton blue is mostly used for staining the dark mold5. (______) Yeast is regarded as multicellular fungi and molds are unicellular fungi. PrOblem 1: Find the slope of the line containing the points: (3,-5) and (-1, -2)Problem 2: Find the x and y intercepts of the line: 2x 3y = 12Problem 3: Graph the line x-4y=8 what are some benefits of doing cold connections versus soldering metal together?jewelry class 1. Reduce the ratio to the simplest form: a)5:10=_____. b)60:54=____. Where did the minutemen get their name? Could include small details in their map drawings Could prepare an egg in a minute Limited their speeches to one minute Were ready to fight at a minute's notice why was papyrus so important to the ancient egyptians? Choose the best spanish equivalent to the phrase. It's snowing. Est nevando. Hace nieve. Nieve. Es nevando. Plz help me with this what does bm meanWhat does bm mean What does bm stand for. If x=a sintheta and y=bcostheta, show that (b^2)(x^2)+(a^2)(y^2)=(a^2)(b^2)a x+3x+3y+3z=21Find the value of X. please helpmeeeeeeeeeeeeeeee citer le type de mmoire perturbe par le T H C c,est un dm note reponse. A cable is 40 decimeters long how long is the cable in meters and be sure to include the correct unit what does 1/4 divided by 1/10 equal Help me plzzzzzzzzzzzzz what is one positive impact the european settlers had on native americans? Examine Kaitlyns steps for solving the system of equations. "3x 2y = 8 3x 2y = "6 Step 1: 4y = 2 Step 2: y = 2 Step 3: "3x 2(2) = 8 Step 4: "3x = 4 Step 5: x = "1. 333 Kaitlyn found the solution to be (1. 3, 2). Is her solution correct? Explain. Yes, she correctly solved the system of equations. No, she made an error in step 1. The y variable should have been eliminated when adding the system of equations. No, she made an error in step 2. She should have found y = 0. 5. No, she substituted y into the wrong equation to solve for x in step 3. What is the enthalpy of combustion when 1 mol C6H6(g) completely reacts with oxygen? 2C6H6(g) 15O2(g) mc001-1. Jpg 12CO2(g) 6H2O(g) ""6339 kJ/mol ""3169 kJ/mol 1268 kJ/mol 6339 KJ/mol.