Select the oxidation reduction reactions??

Combining quantum theory with wave motion of atomic particles is: Wave Mechanics

Answer:

The incorrect statement from the options is OXIDATION IS A "GAIN" OF ELECTRONS

Explanation:

Oxidation in a redox reaction is the loss of electrons. It is also the increase in the oxidation states of an atom or ion or atoms in a molecule. A redox reaction is a type of chemical reaction in which there is a transfer of electrons from an atom or ion to another resulting in a change in oxidation states of the substances involved. The reducing agent in the reaction is undergoes oxidation by losing electrons while the oxidating agent is reduced that is it gains electrons at the end of the reaction. The atom or ion from which electron is lost is said to be oxidized while the other atom or ion involved in the reaction is reduced.

Oxidation is also the combination with O atoms and it is always accompanied by reduction because oxidation forms a half of the whole redox reaction. A substance cannot be oxidized except it has reduced another substance by losing electrons to it.

Answer: Manganese(II)bromide

Explanation:

Because it is a chemical compound composed of manganese and bromine

Answer:

empirical formula = CH2O

molecular formula = C2H4O2

Answer:

See explanation

Explanation:

For the first part of the question, we have to check the chiral carbons in 4-methyl-1,2-cyclohexanediol. In this case carbons, 1 and 2 are chiral, if we have 2 chiral carbons we will have 4 isomers. We have to remember that formula 2^n in which "n" is the number of chiral carbons, so:

2^n = 2^2 = 4 isomers

And the isomers that we can have are:

1) (1R,2S)-4-methylcyclohexane-1,2-diol

2) (1S,2S)-4-methylcyclohexane-1,2-diol

3) (1S,2S)-4-methylcyclohexane-1,2-diol

4) (1S,2R)-4-methylcyclohexane-1,2-diol

See figure 1

For the second part of the question, we have to remember that the oxidation with [tex]OsO_4[/tex] is a syn addition. In other words, the "OHs" are added in the same plane. In this case, we have the methyl group with a wedge bond, so the "OH" groups will have a dashed bond due to the steric hindrance. Due to this we only can have 1 isomer ((1S,2R,4S)-4-methylcyclohexane-1,2-diol). Finally, on this molecule, we dont have any symmetry planes (this characteristic will cancel out the optical activity), so the product of this reaction has optical activity.

See figure 2

I hope it helps!

Answer:

Homoanular dienes have a greater base value than heteroanular dienes

Explanation:

Woodward in 1945 gave a set of rules relating the wavelength of maximum absorption to the structure of a compound. These rules were modified by Fieser in 1959. These sets of rules describe the absorption of organic molecules in the UV region of the electromagnetic spectrum.

Each system of diene or triene has a given fixed value at which maximum absorption is expected to occur according to Woodward rules. This given fixed value is called the base or parent value. If the two double bonds are trans to each other, the diene is said to be transoid. If the two double bonds belong to different rings, the system is said to be heteroanular and the base value in each case is 215nm. If the double bonds are cis to each other (cisoid), or the two double bonds are in the same ring (homoanular), then the base value is 253nm.

Since λmax = base value + ∑ substituent contributions + ∑ other contributions, if the other contributions are not very significant, homoanular diene will have a greater λmax because of its larger base value compared to heteroanular diene. This correlates well with the fact that conjugated systems absorb at a longer wavelength.

Answer:

They are also relatively soft metals: sodium and potassium can be cut with a butter knife.

Answer:A

Explanation:

Answer:

"The active site of the enzyme has a complementary rigid structure" belongs to the key and lock system

"The conformation of the enzyme changes when it binds to the substrate so that the active site conforms to the substrate." belongs to the induced fit system.

"The substrate binds to the enzyme at the active site, forming an enzyme-substrate complex" belongs to both, that is, the key and lock system and the induced fit system.

"The substrate binds to the enzyme through non-covalent interactions" can belong to both enzyme systems.

Explanation:

Enzymatic key and lock systems bear this name because the enzyme at its site of union with the substrate has an ideal shape so that its fit is perfect, similar to a headbreaker, so once they are joined they are not It can bind another substrate to the enzyme, since they are generally associated with strong chemical bonds.

The shape of the enzyme's active site is a negative of what the shape of the substrate would be.

On the other hand, in the mechanism or enzyme system of induced adjustment, the enzyme has an active site that is where it binds with the substrate and another site where another chemical component binds, which when this chemical component binds this enzyme changes its morphology and becomes "active" to bond with your substrate.

This happens a lot in the inactive enzymes that are usually activated in digestive processes since the fact that these enzymes are constantly active would be dangerous, therefore the body takes the induced enzyme system as a control mechanism, where a molecule or chemical compound induces change morphological of an enzyme by means of the allosteric union so that it joins its substrate and catalyzes or analyzes it, depending on the enzymatic character of the enzyme.

Answer:

Explanation:

Volume of silver cube = 2.42³ = 14.17 cm³

mass of silver cube = volume x density

= 14.17 x 10.49 = 148.64 gm

Volume of gold cube = 2.75³ = 20.8  cm³

mass of gold cube =  20.8 x 19.3 = 401.44 gm

specific heat of silver and gold are .24 and .129 J /g°C

mass of 112 mL water = 112 g

Heat absorbed = heat lost = mass x specific heat x temperature fall or rise

Heat lost by metals

= 148.64 x .24 x ( 85.4 -T) + 401.44 x .129 x ( 85.4 - T )

= (35.67 + 51.78 ) x ( 85.4 - T )

87.45 x ( 85.4 - T )

= 7468.23 - 87.45 T

Heat gained by water

= 112 x 1 x ( T - 20.5 )

= 112 T - 2296

Heat lost = heat gained

7468.23 - 87.45 T = 112 T - 2296

199.45 T = 9764.23

T = 48.95° C

Answer:

Path A-B-D involves a catalyst and is slower than A-C-D

Explanation:

The diagram above illustrates both the catalyzed path and the uncatalyzed path of a chemical reaction.

The catalysed path is the path expressed with broken lines and the uncatalyzed path is the path expressed with thick small line as shown in the diagram above.

The catalyzed path has a higher activation energy than the uncatalyzed path.

Therefore, the catalyzed path will be slower that the uncatalyzed path because, the catalyzed path will require a higher energy to overcome the activation energy in order for the reaction to proceed to product.

On the other hand, the uncatalyzed path has a lower activation energy and a lesser amount of energy is needed to overcome it in order for the reaction to proceed to product.

Answer:

n= 0.08186

{He}2s^2 2p^6

Explanation:

PV=nRT

n=PV/RT

n= (1.220 atm)(4.3410 L) / (0.0821 atm*L/mol*K)(788.0 K)

n=0.08186

As for the electron configuration:

Ne:

{He} 2s^2 2p^6

or long hang:

1s^2 2s^2 2p^6

[tex][Ne]=1s^22s^22p^{10}[/tex]

Given:

To find:

1.

The pressure of the gaseous boron trifluoride = P = 1.220 atm

The volume of the gas in bulb = V = 4.3410 L

The moles of the  gaseous boron trifluoride = n

The temperature of gaseous boron trifluoride = T = 788.0 K

Using an ideal gas equation:

[tex]PV = nRT\\\\1.220 atm\times 4.3410 L=n\times 0.0821 atm L/mol K\times 788.0 K\\\\n=\frac{1.220 atm\times 4.3410 L}{0.0821 atm L/mol K\times 788.0 K}\\\\n=0.08186 mol[/tex]

The moles of gaseous boron trifluoride is 0.08186 moles.

2.

The atomic number of neon atom = 10

The electronic configuration in the ground state is the most stable arrangement of the electrons in the lowest energy levels.

The ground state electronic configuration of neon is:

[tex][Ne]=1s^22s^22p^{10}[/tex]

Learn more about the ideal gas equation and electronic configuration here:

brainly.com/question/1056445?referrer=searchResults

brainly.com/question/5524513?referrer=searchResults

Answer:

A, B and C are compounds

Explanation:

First of all, I need to establish that when carbon is burnt in excess oxygen, carbon dioxide is obtained as shown by this equation; C(s) + O2(g) ----> CO2(g).

Looking at the presentation in the question, A was said to be heated strongly and it decomposed to B and C. Only a compound can decompose when heated. Elements can not decompose on heating. Secondly, compounds usually decompose to give the same compounds that combined to form them. Compounds hardly decompose into their constituent elements.

Again from the information provided, the compound A is a white solid. This is likely to be CaCO3. It decomposes to give another white solid. This may be CaO and the gas was identified as CO2.

Hence;

CaCO3(s)--------> CaO(s) + CO2(g)

Answer:

Wavelength, λ  = 6.7 x 10^-11 m

Explanation:

Frequency and wavelength are inversely proportional to each other.

In this problem;

f =  4.5 x 10^18 Hz

wavelength, λ = ?

Speed of light, c = 3 x 108 m/s.

These variables are related by the following equation;

c = λ * f

Making λ subject of focus, we have;

λ = c / f

λ = 3 x 10^8 / 4.5 x 10^18

λ  = 0.67 x 10^-10

λ  = 6.7 x 10^-11 m

Answer:

C. Potential energy

Explanation:

Kinetic energy and gravitational potential energy are both forms of potential energy. Potential energy is stored energy, when an object is not in motion it has stored energy. When an object is an motion it has kinetic energy. An object posses gravitational potential energy when it is above or below the zero height.

Answer:

The lewis structure of the compounds can be drawn by making the skeleton of the molecule first. Then the different atoms are arranged and the electrons are arranged in their bonding pattern. The lone pair of the atoms, which are not involved in the bonding are represented by the dots.

So the lewis structures of both the compound methyl mercaptan has been in the attached image:

Spelling of methyl metcaptain is wrong, the correct spelling is methyl mercaptan.

Answer:

Methyl mercaptan is also known as Methanethiol with the chemical formula  CH3SH and it is an organosulfur compound.

For lewis structure of methyl mercaptan (CH3SH), there are total 14 valence electrons. Four hydrogen atoms has one valence electron each, carbon has four valence electrons and sulfur has six valence electrons. Carbon form one bond with three hydrogen atoms by sharing one electron with each, carbon form one single bond with sulfur atom by sharing one electron with it and sulfur form one single bond with hydrogen. Sulfur left with four unpair electrons.

Answer:

in crystalline solids

Hope this answers your question, good luck

The crystalline solids represent the best identification where the long-range order should be found.

Crystalline solids refer to the solid where the atoms, molecules should be make the arrangement. The smallest & repeated pattern of this solid should be called as the unit cell. The unit cell should be treated as the bricks in the wall which means it should be homogenous in the nature and repeated

Therefore, The crystalline solids represent the best identification where the long-range order should be found.

Learn more about solid here: https://brainly.com/question/17431076

Answer:

Molecules = 7.5 × 10²³ molecules

Explanation:

Given:

Moles = 1.25 mol

Avogadro's No. = [tex]N_{A}[/tex] = 6.022 * 10²³

Required:

Molecules = ?

Formula:

Molecules = Moles × [tex]N_{A}[/tex]

Solution:

Molecules = 1.25 × 6.022 × 10²³

Molecules = 7.5 × 10²³ molecules

Answer:

The total surface area of these N spherical droplets is 4.4929 m²

Explanation:

From the information given :

assuming that :

30 cm³ of gasoline is atomized into N spherical droplets &

each with a radius of 2.0 × 10−5 m

We are tasked to determine the total surface area of these N spherical droplets

We all known that:

[tex]1 \ cm^3 = 10 ^{-6} m^3[/tex]

Therefore

[tex]30 \ cm^3 = 30 * 10 ^{-6} m^3 = 3 *1 0^{-5} \ m^3[/tex]

For each droplet; there is a required volume which is = [tex]\dfrac{4}{3} \pi r ^3[/tex]  since it assumes a sphere shape .

Thus;

replacing radius(r) with 2.0 × 10−5 m; we have:

[tex]= \dfrac{4}{3} \pi * (2.0 *10^{-5} m) ^3[/tex]

= [tex]3.35 * 10^{-14} \ m^3[/tex]

However; there are [tex]3*10^{-5} \ m^3[/tex] gasoline atomized into N spherical droplets with each with radius 2.0 × 10−5 m

For N ; we have ;

[tex]=\dfrac{3*10^{-5} \ m^3}{3.35 * 10^{-14} \ m^3/ droplet}[/tex]

= [tex]8.95*10^8 \ droplet s[/tex]

So; each droplet have a surface area = [tex]4 \pi r^2[/tex]

= [tex]4 \pi (2.0*10^{-5}m) ^2[/tex]

= [tex]5.02*10^{-9} \ m^2/droplets[/tex]

The surface area per droplet is equivalent to [tex]5.02*10^{-9} \ m^2/droplets[/tex]

Thus;

The total surface area of these N spherical droplets will be :

= [tex]8.95*10^8 \ droplet s * 5.02*10^{-9} \ m^2/ droplets[/tex]

= 4.4929 m²

The total surface area of these N spherical droplets is 4.4929 m²

Answer:

NaClO + CH₃COOH ----> HClO + CH3CO- + Na

Explanation:

This reaction occurs between the combination of a salt and an acid, that is, an oxide-reduction reaction

Answer:

33.3% of Sn in the sample

Explanation:

The addition of SO₄⁻ ions produce the selective precipitation of Pb²⁺ to produce PbSO₄.

Moles of PbSO₄ (molar mass 303.26g/mol) in 2.93g are:

2.93g ₓ (1mol / 303.26) = 9.66x10⁻³ moles PbSO₄ = Moles Pb²⁺.

As molar mass of Pb is 207.2g/mol, mass in 9.66x10⁻³ moles of Pb²⁺ is:

9.66x10⁻³ moles of Pb²⁺ ₓ (207.2g / mol) = 2.00g of Pb²⁺

As mass of the sample is 3.00g, mass of Sn²⁺ is 3.00g - 2.00g = 1.00g

And the percentage of Sn in the sample is:

1.00g / 3.00g ₓ 100 =

Answer:

d) El agua pesada contiene mas elementos

Explanation:

La diferencia fundamental entre el agua pesada y el agua ligera es que la primera tiene una proporción mayor de deuterio que la segunda. El deuterio es un ión del hidrógeno que tiene un peso atómico mayor que el hidrógeno común y corriente. Por ende, la opción D ofrece la mejor aproximación.

Answer:

....................

lllllllllllllllll

Explanation:ki

Answer:

D. pollution

Explanation:

Increase in ocean temperature is one of the major consequence of global warming which directly leads to rise in sea level,  coral bleaching and ocean deoxygenation.

Warming ocean temperatures do not leads to pollution directly whereas pollution leads to warming ocean temperatures. So, in the case of pollution, the effect is opposite.

Hence, the correct option is D.

Answer:

On the off chance that the wavelength(λ) maximum worth has been changed to 520 nm from 470 nm on the spectrophotometer, less light would be absorbed and in this way %T would be higher than the one found at 470 nm. The wavelength utilized at 520 nm isn't adequate for the excitation and consequently lesser light is absorbed by the arrangement.

Explanation:

A spectrophotometer is an analytical equipment used to quantitatively gauge the transmission(passage) or impression of visible light, UV light or infrared light through a medium.

Transmittance (τ) is the ratio of the brilliant or luminous flux at a given wavelength that is transmitted to that of the incident radiation.

where, Keq is the equilibrium constant.

On the off chance that the wavelength(λ) has been changed to 520 nm from 470 nm on the spectrophotometer, less light would be absorbed and in this way %T would be higher than the one found at 470 nm.

A spectrophotometer is an analytical equipment used to quantitatively gauge the transmission(passage) or impression of visible light, UV light or infrared light through a medium. Transmittance (τ) is the ratio of the brilliant or luminous flux at a given wavelength that is transmitted to that of the incident radiation. The wavelength utilized at 520 nm isn't adequate for the excitation and consequently lesser light is absorbed by the arrangement. As the concentration goes up, more radiation is absorbed and the absorbance goes up. Therefore, the absorbance is directly proportional to the concentration.

Find more information about Transmittance here: brainly.com/question/14919298

Answer:

THE EMPIRICAL FORMULA FOR THE UNKNOWN COMPOUND IS C7H9O

Explanation:

The empirical formula for the unknown compound can be obtained by following the processes below:

1 . Write out the percentage composition of the individual elements in the compound

C = 75.68 %

H = 8.80 %

O = 15.52 %

2. Divide the percentage composition by the atomic masses of the elements

C = 75 .68 / 12 = 6.3066

H = 8.80 / 1 = 8.8000

O = 15.52 / 16 = 0.9700

3. Divide the individual results by the lowest values

C = 6.3066 / 0.9700 = 6.5016

H = 8.8000 / 0.9700 = 9.0722

O = 0.9700 / 0.9700 = 1

4. Round up the values to the whole number

C = 7

H = 9

O = 1

5 Write out the empirical formula for the compound

C7H90

In conclusion, the empirical formula for the unknown compound is therefore C7H9O

Answer:

21.88mL is the volume of base required for the titration.

Explanation:

For an acid-base titration trying to find the concentration of an acid, you must add a known quantity of the acid and titrate it with an standarized base.

If you know the moles of base you add to the acid solution, these moles are equal to moles of acid.

In the buret of the titration, initial volume is 1.94mL and final volume is 23.82mL. The volume you are adding is the difference between initial and final volume, that is:

23.82mL - 1.94mL

Answer:a

Explanation:

The three characteristics of minerals are that they are solid, have definite crystal structure and definite chemical composition.

Minerals are defined as a chemical compound  which has a well -defined composition and possesses a specific crystal structure.It occurs naturally in the pure form.

If a compound occurs naturally in different crystal structure then each structure is considered as a different mineral.The chemical composition of a mineral varies  depending on the presence of small impurities which are present in small quantities.

Some minerals  can have variable proportions of two or more chemical elements  which occupy equivalent position in the crystal structure.It may also have variable composition which is split into separate species.

Physical properties of minerals include color,streak, luster,specific gravity  and cleavage.

Learn more about minerals ,here:

https://brainly.com/question/1333886

#SPJ6

Answer:

Explanation:

a. change of colour:

A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products. The products have different molecular structures than the reactants. Different atoms and molecules radiate different colours of light. Hence, there usually is a change in colour during a chemical reaction.

Eg: copper reactions with the elements

b. Evolution of gas:

A gas evolution reaction is a chemical reaction in which one of the end products is a gas such as oxygen or carbon dioxide.

Eg: ammonium hydroxide breaks down to water and ammonia gas.

c. Change of smell :

Production of an Odor Some chemical changes produce new smells.  ... The formation of gas bubbles is another indicator that a chemical change may have occured.

Eg: The chemical change that occurs when an egg is rotting produces the smell of sulfur.

d. Change of state:

A chemical reaction is a process in which one or more substances, also called reactants, are converted to one or more different substances, known as products.

Eg: candle wax (solid) melts initially to produce molten wax (liquid)

plz mark as brainliest!!!!

Answer:

The third reaction

(2NaOH + NiCL2 ---> 2NaCl + Ni(OH)2)

Explanation:

By definition, a precipitation reaction refers to the formation of an insoluble salt when two solutions containing soluble salts are combined.

(Source: lumenlearning)

From the 4 options, we can eliminate the first and second one immediately because there is no formation of an insoluble salt.

Then, the last one can also be eliminated because even though there is insoluble solid formed, but it is not a salt, and, the reactants are not solutions too. In fact, the last one is a displacement reaction. A more reactive metal displaces a less reactive metal to form an ion.

Since the third reaction matches the definition of precipitation reaction, this is the answer.

Answer:

[tex]Pb(CO_{3})_{2} \\Pb(NO_{3})_{4} \\FeCO_{3}\\Fe(NO_{3})_{2}[/tex]

Explanation:

[tex]Pb^{4+}(CO_{3}^{2-})_{2} --->Pb(CO_{3})_{2} \\Pb^{4+} (NO_{3}^{-})_{4} --->Pb(NO_{3})_{4} \\Fe^{2+} CO_{3}^{2-} --->FeCO_{3}\\Fe^{2+} (NO_{3}^{-})_{2}--->Fe(NO_{3})_{2}[/tex]