sam exerts a force of 65 N on a lawn mower with a mass of 25 kg. which formula can be used to calculate the acceleration of a lawn mower

Answer:

The distance traveled by the second block is 0.197 m

Explanation:

Given;

mass of the small block, m₁ = 0.2 kg

distance traveled by the block, d₁ =0.394 m

time of travel, t = 2 s

mass of the second block, m₂ = 0.4 kg

distance traveled by the second block, d₂ = ?

The work done per unit time on the inclined plane is given by;

[tex]\frac{f_1d_1}{t} = \frac{f_1d_1}{t}\\\\f_1d_1 = f_2d_2\\\\m_1gd_1 = m_2gd_2\\\\m_1d_1 = m_2d_2\\\\d_2 = \frac{m_1d_1}{m_2} \\\\d_2 = \frac{0.2*0.394}{0.4}\\\\d_2 = 0.197 \ m[/tex]

Therefore, the distance traveled by the second block is 0.197 m

Answer: 34 km, 21 km  61 degrees north of east

Explanation: distance = 13 + 3 + 18 = 34

   displacement = 13 - 3 = 10

               10^2 + 18^2 = 424

              find the square root of 424 ( 20.5 rounded to 21 )

The total distance walked is 34 km and the resulting displacement is 20.6 km.

a) The total distance is gotten by summing up all the distance.

Total distance = Distance moved east + distance moved north + distance moved west

Total distance = 13 km + 18 km + 3 km = 34 km

b) The displacement is the distance from the beginning point to end point.

Displacement² = 18² + (13 - 3)² = 18² + 10²

Displacement² = 424

Displacement = 20.6 km

Therefore the total distance walked is 34 km and the resulting displacement is 20.6 km.

Find out more at: https://brainly.com/question/12874363

Answer:

steel because being alloy in metal it has free electrons in metals

Answer:

4. 5g

Explanation:

F=ma so, m=Fa. All you have to do is 10/2. Don't be confused by the units. Mass will normally be in grams.

Answer:

The mechanical efficiency of the pump is 91.8 %

Explanation:

Given;

input power, p = 44 kw

density of oil, ρ = 860 kg/m³

motor efficiency, η = 90 %

inlet diameter, d₁ = 8 cm

outlet diameter, d₂ = 12 cm

volume flow rate, V = 0.1 m³/s

pressure rise, P = 500kPa

output power  = motor efficiency x input power

output power  = 0.9 x 44 = 39.6 kW

Thus, the mechanical input power = 39.6 kW

The mechanical output power  is given by change in mechanical energy;

[tex]E = mgh + \frac{m}{2} (v_2^2 - v_1^2) \\\\E = \rho V g h + \frac{\rho V}{2} [(\frac{V_2}{\pi r_2^2} )^2 - (\frac{V_1}{\pi r_1^2})^2]\\\\E = PV + \frac{\rho V^3}{2\pi^2} [\frac{1}{ r_2^4} - \frac{1}{ r_1^4}]\\\\E = (500 *10^3)(0.1) + \frac{(860)(0.1)^3}{2\pi^2} [\frac{1}{ 0.06^4} - \frac{1}{ 0.04^4}]\\\\E = 50000 -13653.51\\\\E = 36346.48 \ W\\\\E = 36.347 \ kW[/tex]

The mechanical efficiency is given by

η = mechanical output power /  mechanical input power

η = 36.347 / 39.6

η = 0.918

η = 91.8 %

Therefore, the mechanical efficiency of the pump is 91.8 %

Answer:

44 years

Explanation:

Use half life equation:

A = A₀ (½)^(t / T)

where A is the final amount,

A₀ is the initial amount,

t is time,

and T is the half life.

0.25 A₀ = A₀ (½)^(t / 22)

0.25 = (½)^(t / 22)

t / 22 = 2

t = 44

44 sec is half life of a given sample of radium is 22 years the sample will reduce to 25% of its original value.

The period of time it takes for one-half of a radioactive isotope to decay is known as the half-life. A given radioactive isotope's half-life is constant; it is unaffected by external factors and independent of the isotope's starting concentration.

Use half life equation:

A = A₀ (½)^(t / T)

where A is the final amount,

A₀ is the initial amount,

t is time,

and T is the half life.

0.25 A₀ = A₀ (½)^(t / 22)

0.25 = (½)^(t / 22)

t / 22 = 2

t = 44 sec

44 sec is half life of a given sample of radium is 22 years the sample will reduce to 25% of its original value.

To learn more about half life refer to the link:

brainly.com/question/24710827

#SPJ2

Answer:

2.13 m/s^2.

Find the remaining answer in the explanation

Explanation:

Given that a sprinter practicing for the 200-m dash accelerates uniformly from rest at A and reaches a top speed of 41 km/h at the 61-m mark. He then maintains this speed for the next 83 meters before uniformly slowing to a final speed of 34 km/h at the finish line.

1.) The maximum horizontal acceleration will be when she attained her maximum speed. That is,

Speed = 41 km/h

Convert km/h to m/s

(41×1000) / 3600

Speed = 11.39 m/s

Using speed formula to calculate time

Speed = distance/time

11.39 = 61/t

t = 61/11.39

t = 5.36s

Where the distance = 61 m

Maximum acceleration = velocity /time

Maximum acceleration = 11.39/5.36

Maximum acceleration = 2.13 m/s^2

The maximum acceleration value occurs when the sprinter is starting from rest and attaining the maximum speed.

Answer:

1. a = 9.8 m/s²

2. t = 4.28 s

3. Vf = 42 m/s

4. Vf = 28 m/s  

Explanation:

1.

Since, the body is under free fall motion. Therefore, the value of its acceleration shall be equal to the acceleration due to gravity.

a = 9.8 m/s²

2.

The time taken by the ball to reach the ground can be calculated by using second equation of motion:

h = Vi t + (1/2)gt²

where,

h = height = 90 m

Vi = initial velocity = 0 m/s

t = time taken = ?

Therefore,

90 m = (0 m/s)t + (1/2)(9.8 m/s²)t²

t = √(18.36 s²)

t = 4.28 s

3.

In order to find final velocity we use first equation of motion:

Vf = Vi + gt

Vf = 0 m/s + (9.8 m/s²)(4.28 s)

Vf = 42 m/s

4.

when the ball is at height of 50 m, it means it has covered:

h = 90 m - 50 m = 40 m

we use third equation of motion at this point:

2gh = Vf² - Vi²

(2)(9.8 m/s²)(40 m) = Vf² - (0 m/s)²

Vf = √(784 m²/s²)

Vf = 28 m/s

Answer:

the y axis, every moment is subjected to a vertical acceleration directed towards the center of the Earth, which is called the acceleration of gravity

Explanation:

In projectile launching, the movement is separated into two movements, one on the x-axis and the other on the y-axis, related through time.

In horizontal movement, the speed is constant, because there is no acceleration in this axis, the effect of air friction is almost always eliminated.

In the other movement on the y axis, every moment is subjected to a vertical acceleration directed towards the center of the Earth, which is called the acceleration of gravity.

This value of the eceleration of gravity is constant for small distances

compared to the radius of the Earth, for higher altitudes an expansion in beings of the distance is used, giving a linear dependence.

Answer:

im going between 2 of them b and c but i would have choose b

Explanation:

(a) The car will leave tangentially to the road, so it will take path d.

(b) Sum of forces on the car in the vertical direction:

∑F = ma

N − mg = 0

N = mg

Sum of forces on the car in the centripetal direction:

∑F = ma

Nμ = m v²/r

mgμ = m v²/r

gμ = v²/r

v = √(grμ)

The maximum velocity is independent of mass, so adding sandbags will not work.

Answer:

a

 [tex]Q_e  =  -4.39 *10^{11}  \  C [/tex]

b

[tex]Q_p  =  + 2.395*10^{-8} \  C [/tex]

Explanation:

Generally the number of electron in the given mass is  mathematically evaluated as

        [tex]N_e =  \frac{2.5}{m_e }[/tex]

Here  m_e is the mass of electron with value [tex]m_e =  9.11 * 10^{-31} \  kg[/tex]

    =>  [tex]N_e =  \frac{2.5}{ 9.11 * 10^{-31} }[/tex]

       =>  [tex]N_e =2.74 *10^{30} \  electrons [/tex]

The total electric charge is mathematically represented as

       [tex]Q_e  =  N_e  *  e[/tex]

Here e is the charge on a single electron with value  [tex]e  =  1.60 *10^{-19}  \  C[/tex]

 So

          [tex]Q_e  =  -2.74 *10^{30}   *  1.60 *10^{-19} [/tex]

          [tex]Q_e  =  -4.39 *10^{11}  \  C [/tex]

The  negative sign is because we are considering electron

Generally the number of  protons in the given mass is  mathematically evaluated as

    [tex]N_p =  \frac{2.5}{m_p }[/tex]

Here  m_p is the mass of electron with value [tex]m_e =  1.67 * 10^{-27} \  kg[/tex]

    =>  [tex]N_p =  \frac{2.5}{ 1.67 * 10^{-27} }[/tex]

       =>  [tex]N_p =1.497 *10^{27} \  protons [/tex]

The total electric charge is mathematically represented as

       [tex]Q_p  = + N_p  *  e[/tex]

Here p is the charge on a single proton with value  [tex]p  =  1.60 *10^{-19}  \  C[/tex]

 So

          [tex]Q_p  =  +1.497 *10^{27}   *  1.60 *10^{-19} [/tex]

          [tex]Q_p  =  + 2.395*10^{-8} \  C [/tex]

Answer:

A.) 5 mph

B.) 20 mph

Explanation:

Given that you are traveling 3 miles north then 4 miles west before stopping to take a break. If this hike takes 1 hour,

Let's first calculate the displacement be using pythagorean theorem

D = sqrt ( 3^2 + 4^2 )

D = sqrt ( 9 + 16 )

D = sqrt ( 25 )

D = 5

Average velocity = displacement/time

Average velocity = 5/1

Average velocity = 5 mph

Therefore, your average velocity during that time is 5 mph

- You leave your house to go for a drive to clear your head, driving 10 miles over the course of 30 minutes before arriving back home. 

Average velocity = 10/ 0.5

Average velocity = 20 mph

Answer:

a

         [tex]q_1 = -1.389 *10^{-5} \  C [/tex]   , [tex]q_2 = -1.389 *10^{-5} \  C [/tex]

OR

           [tex]q_1 = 1.389 *10^{-5} \  C [/tex]   , [tex]q_2 = 1.389 *10^{-5} \  C [/tex]    

b

[tex]q_1 = 1.389 *10^{-5} \ C [/tex] and [tex]q_2 = 1.389 *10^{-5} \ C [/tex]

Explanation:

Generally the force exerted on the string is mathematically represented as

[tex]F = k * e[/tex]

substituting values 180 N/m for k and 0.024 m for e

[tex]F = 180 * 0.024[/tex]

[tex]F = 4.32 \ N[/tex]

This force can also equivalent to the electrostatic force between the charges i.e

[tex]F = k * \frac{q^2}{ r^2}[/tex]

substituting [tex]9*10^{9}\ kg\cdot m^3\cdot s^{-4} \cdot A^{-2}.[/tex] for k and ( 0.34 + 0.024 = 0.364 m) for r we have

[tex] 4.32= 9*10^{9} * \frac{q^2}{ (0.364)^2}[/tex]

[tex]q = \sqrt{1.929 *10^{-10}}[/tex]

[tex]q = 1.389 *10^{-5} \ C [/tex]

Given the spring was stretched it means that the force between the charges is a repulsive for which tell us that both charge are of the same sign thus the possible  algebraic signs  of the charges are

         [tex]q_1 = -1.389 *10^{-5} \  C [/tex]   , [tex]q_2 = -1.389 *10^{-5} \  C [/tex]

OR

[tex]q_1 = 1.389 *10^{-5} \ C [/tex] , [tex]q_2 = 1.389 *10^{-5} \ C [/tex]

Answer:

Quantitative is the correct term

Answer:

a)  I = 0.0198 kg m² ,  b)    I = 21.85 kg m²

Explanation:

For this exercise we will use the definition of moment of inertia

        I = ∫ r² dm

For body with high symmetry they are tabulated

sphere  I = 2/5 m r²

bar with respect to  center of mass I = 1/12 m L²

let's calculate the mass of each body

bar

        ρ = m / V

        m = ρ V

        m = ρ l w h

where we are given the density of the bar rho = 32840 kg / m³ and its dimensions 1 m, 0.8 cm and 4 cm

        m = 32820 1 0.008 0.04

        m = 10.5 kg

Sphere

       M = ρ V

       V = 4/3 pi r³

       M = rgo 4/3 π r³

give us the density 37800 kg / m³ and the radius of 5 cm

       M = 37800 4/3 π 0.05³

       M = 19.8 kg

a) asks us for the moment of inertia of the sphere with respect to its center of mass

        I = 2/5 M r²

        I = 2/5 19.8 0.05²

        I = 0.0198 kg m²

b) the moment of inertia with respect to the turning point, for this we will use the theorem of parallel axes

        I = I_cm + M d2

where d is the distance from the body to the point of interest

        I_cm = 0.0198 kg m²

the distance to the pivot point is

        l = length of the bar + radius of the sphere

        l = 1 + 0.05 = 1.005 m

        I = 0.0198 + 19.8 1.05²

        I = 21.85 kg m²

Answer:

HEYO BRO! (my bad for da caps)

Explanation:

Evidence-based practice (EBP) is the idea that occupational practices ought to be based on scientific evidence. That at first sight may seem to be obviously desirable, but the proposal has been controversial.

Happy to Help From, Adam

Answer:

Static friction prevents a stationary object from moving while kinetic or dynamic friction slows down a moving object.

Explanation:

Static Friction is the maximum force that must be overcome before a stationary object begins to  move, while kinetic or dynamic friction is the maximum force that must be overcome for an object in motion to continue moving at a uniform velocity.

Static friction keeps a stationary object at rest, once the Force of Static friction is overcome, the Force of Kinetic friction is what slows down the moving object.

Answer:

The value is [tex]D = 205.8 \ m [/tex]

Explanation:

The time taken for the column to take a step mathematically represented as

100 steps => 1 minutes => 60 seconds

1 step => t

=> [tex]t = 0.6 \ s [/tex]

Generally the length of the column is mathematically represented as

[tex]D = v * t[/tex]

substituting 343 m/s for v we have

        [tex]D =  343 * 0.6 [/tex]

  =>    [tex]D =  205.8 \  m  [/tex]

Answer:

n = 2.25 x 10¹⁴ electrons/s

Explanation:

The amount of electric current is defined as the electric charge passing through an area per unit time. Hence:

I = q/t

where,

I = Current

q = amount of charge

t = time interval

but,

q = ne

therefore,

I = ne/t

where,

n = no. of electrons

e = charge on single electron = 1.6 x 10⁻¹⁹ C

t = 1 s (for electrons passing per second)

I = Current = 36 μA = 3.6 x 10⁻⁵ A

Therefore,

3.6 x 10⁻⁵ A = n(1.6 x 10⁻¹⁹ C)/1 s

n = (3.6 x 10⁻⁵ A)/(1.6 x 10⁻¹⁹ C)

n = 2.25 x 10¹⁴ electrons/s

Answer:

-15m/s/s

Explanation:

Acceleration = change in speed/ change in time

The change in speed is calculated by subtracting the initial speed from the final speed, so the change in speed is: 50 - 80 = -30m/s. The change in time is 2 - 0 = 2.

So the car acceleration is -30/2 = -15m/s/s

It is negative because it is decelerating.

Hope this helped!

Answer:

the full segment is:  30 units long

which coincides with answer C in your list

Explanation:

If M is the midpoint, then it divides the segment in two equal parts. Then, we can say that:

RM = MS (equality among the two parts of the divided segment)

replacing RM with "5 x" and MS with "x + 12", we get:

5 x = x + 12

solving for x:

5 x - x = 12

4 x = 12

then x = 3

With this info, we can calculate the length of each half of the segment and consequently its full length:

RM = 5 x = 5 (3) = 15

then the full segment is:  30 units long

Answer:

Explanation:

Aristotle was a philosopher and a scientist who believed good life for humans is ultimately about happiness and this happiness can be achieved by virtue or high moral standards.

In the contemporary world, generally, everyone's ultimate goal is still to be happy but achieving this feat by being virtuous or having a high moral standard is fading away in our contemporary world as people just want to be happy by any means possible. Some amass wealth illegally just to be happy while others do things that are considered immoral (by the society) to be happy hence people still want a good life but not a way described by Aristotle.

Aristotle stated that a good life is about happiness and this can only be achieved through high moral standards.

In conclusion, Aristotle's statement about the good life is not applicable in the contemporary world anymore.

Read related link on:

https://brainly.com/question/21792802

Answer:

50 degree.

Explanation:

Given that the components of vector A are given as follows: Ax = 5.6 Ay = -4.7

The angle between vector A and B in the positive direction of x-axis will be achieved by using the formula:

Tan Ø = Ay/Ax

Substitute Ay and Ax into the formula above.

Tan Ø = -4.7 / 5.6

Tan Ø = -0.839

Ø = tan^-1(-0. 839)

Ø = - 40 degree

Therefore, the angle between vector A and B positive direction of x-axis will be

90 - 40 = 50 degree.