Answers
Answer:
13: (Im not sure sorry)
14: C
15: B
16: B
17: B
18: B
Related Questions
An airplane flew from San Francisco to Washington, D.C. Approximately
halfway through the flight, the plane had traveled 2,000 km in 2.5 hours.
What was the speed during this period?
Another airplane is flying in the opposite direction. It covers the same distance in exactly 2 hours. What was its speed and direction during this period?
Answers
Answer:
The solution is given below:
Explanation:
The computation of the speed is shown below
As we know that
Speed = distance ÷ time
where
distance is 2000 km
And, the time is 2.5 hours
SO, the speed is
= 2,000 ÷ 2.5
= 800 km/h
Now the distance would be the same i.e. 2,000 km
but the time is 2 hours
So, the speed is
= 2,000 km ÷ 2 hours
= 1,000 km/hr
The direction should be opposite to the first airplane
A thin rod of length 0.75 m and mass 0.42 kg is suspended
freely from one end. It is pulled to one side and then allowed to swing
like a pendulum, passing through its lowest position with angular
speed 4.0 rad/s. Neglecting friction and air resistance, find (a) the
rod's kinetic energy at its lowest position and (b) how far above that
position the center of mass rises.
Answers
Answer:
a) K = 0.63 J, b) h = 0.153 m
Explanation:
a) In this exercise we have a physical pendulum since the rod is a material object, the angular velocity is
w² = [tex]\frac{m g d}{I}[/tex]
where d is the distance from the pivot point to the center of mass and I is the moment of inertia.
The rod is a homogeneous body so its center of mass is at the geometric center of the rod.
d = L / 2
the moment of inertia of the rod is the moment of a rod supported at one end
I = ⅓ m L²
we substitute
w = [tex]\sqrt{\frac{mgL}{2} \ \frac{1}{\frac{1}{3} mL^2} }[/tex]
w = [tex]\sqrt{\frac{3}{2} \ \frac{g}{L} }[/tex]
w = [tex]\sqrt{ \frac{3}{2} \ \frac{9.8}{0.75} }[/tex]
w = 4.427 rad / s
an oscillatory system is described by the expression
θ = θ₀ cos (wt + Φ)
the angular velocity is
w = dθ /dt
w = - θ₀ w sin (wt + Ф)
In this exercise, the kinetic energy is requested in the lowest position, in this position the energy is maximum. For this expression to be maximum, the sine function must be equal to ±1
In the exercise it is indicated that at the lowest point the angular velocity is
w = 4.0 rad / s
the kinetic energy is
K = ½ I w²
K = ½ (⅓ m L²) w²
K = 1/6 m L² w²
K = 1/6 0.42 0.75² 4.0²
K = 0.63 J
b) for this part let's use conservation of energy
starting point. Lowest point
Em₀ = K = ½ I w²
final point. Highest point
Em_f = U = m g h
energy is conserved
Em₀ = Em_f
½ I w² = m g h
½ (⅓ m L²) w² = m g h
h = 1/6 L² w² / g
h = 1/6 0.75² 4.0² / 9.8
h = 0.153 m
we cannot work without food why
Answers
Answer:
Food supplies the body with energy and without energy the body cannot work.
What is the Underground water
Answers
Answer:
water found underground is called undergroundwater
give 3 uses of mirrors in everyday life
Answers
Answer:
Putting on makeup lol
Driving
Magnification and Science
Photography
Explanation:
I did an extra one if the makeup one wasn't allowed hahah
2. Getting ready
3. Brushing teeth
Suppose you are planning a trip in which a spacecraft is to travel at a constant velocity for exactly six months, as measured by a clock on board the spacecraft, and then return home at the same speed. Upon return, the people on earth will have advanced exactly 90 years into the future. According to special relativity, how fast must you travel
Answers
Answer:
v = 0.99 c = 2.99 x 10⁸ m/s
Explanation:
From the special theory of relativity:
[tex]t = \frac{t_o}{\sqrt{1-\frac{v^2}{c^2} } }\\[/tex]
where,
v = speed of travel = ?
c = speed of light = 3 x 10⁸ m/s
t = time measured on earth = 90 years
t₀ = time measured in moving frame = 6 months = 0.5 year
Therefore,
[tex]90\ yr = \frac{0.5\ yr}{\sqrt{1-\frac{v^2}{c^2} } } \\\\\\\sqrt{1-\frac{v^2}{c^2}} = \frac{0.5\ yr}{90\ yr}\\ 1-\frac{v^2}{c^2} = 0.00003086\\\frac{v^2}{c^2} = 1-0.00003086\\[/tex]
v = 0.99 c = 2.99 x 10⁸ m/s
What question were you trying to answer in this study?
A. Why are the lightbulbs exploding?
B. Why are the lightbulbs melting?
C. Why are the lightbulbs so dim?
D. Why are the lightbulbs burning out?
Answers
What is revolution?
A. The spinning of an object on its axis
B. The motion of an object along a curved path
C. The orbit of a satellite around a central body
D. The motion of two objects around each other
Answers
Explanation:
B. the motion of an object along a curved path
hope it helps.
Answer:
the orbit of a satellite around a central body
Explanation:
hope that helps :)
The small piston of the hydraulic press with an area of 20 cm² is subjected to a force of 200 N and has lowered by 50 cm. What force acts on a large piston with an area of 0.01 m² and to what height did it rise? (I already found out that large piston force is 1000N how do I calculate in what height did it rise?)
Answers
Answer:
The large piston would rise by [tex]10\; \rm cm[/tex] (which is equal to [tex]0.1\; \rm m[/tex].)
Explanation:
Convert the unit of the area of the larger piston to [tex]\rm cm^{2}[/tex]:
[tex]0.01\; \rm m^{2} = 100\; \rm cm^{2}[/tex].
If the pipe is cylindrical, the liquid that the smaller piston pushed into the pipe would be a cylinder:
Height of the cylinder: [tex]50\; \rm cm[/tex].Area of the top of the cylinder: [tex]20\; \rm cm^{2}[/tex] (same as the area of the smaller piston.)Volume of liquid that the smaller piston pushed into the pipe:
[tex]\begin{aligned} & \text{Volume of Cylinder} \\ &= \text{Area of the Top of the Cylinder} \\ &\quad\quad \times \text{Height of Cylinder} \\ &= 20\; \rm cm^{2} \times 50\; \rm cm \\ &= 1000\; \rm cm^{3} \end{aligned}[/tex].
Unlike gas, the volume of a liquid (such as the one in this hydraulic press) at a given temperature tends to be fixed.
Therefore, when the small piston pushed [tex]1000\; \rm cm^{3}[/tex] of liquid into the pipe, liquid of the exact same volume ([tex]1000\; \rm cm^{3}\![/tex]) would appear under the larger piston and push the larger piston upwards.
Rearrange the equation to find the height by which the larger piston rises (same as the height of the [tex]1000\; \rm cm^{3}[/tex] liquid cylinder under the larger piston.)
[tex]\begin{aligned} & \text{Height of Cylinder} \\ &= \frac{\text{Volume of the Cylinder}}{\text{Area of the Top of the Cylinder}} \\ &= \frac{1000\; \rm cm^{3}}{100\; \rm cm^{2}} = 10\; \rm cm \end{aligned}[/tex].
X-rays are electromagnetic waves used to obtain images of bones. An x-ray machine produces x-ray waves with a frequency of 1.25 x 10^18 Hz.
(a) Calculate the time period of these x-rays.
Answers
Answer:
[tex]T=8\times 10^{-19}\ s[/tex]
Explanation:
Given that,
The frequency of x-ray is, [tex]f=1.25\times 10^{18}\ Hz[/tex]
We need to find the time period of these x-rays. Let it is be T. We know that, the relation between f and T is given by :
T = 1/f
So,
[tex]T=\dfrac{1}{1.25\times 10^{18}}\\\\=8\times 10^{-19}\ s[/tex]
So, the time period of these x-rays is equal to [tex]8\times 10^{-19}\ s[/tex].
The time period of the electromagnetic wave is 8.0 × 10⁻¹⁹ seconds.
Given the data in the question;
Frequency; [tex]f =1.25 * 10^{18}Hz[/tex]
Time period; [tex]T =\ ?[/tex]
Time period is simply the time taken for one complete cycle of vibration to pass a given point.
It is expressed as:
[tex]T = \frac{1}{f}[/tex]
We substitute our value into the equation
[tex]T = \frac{1}{1.25 * 10^{18}Hz} \\\\T = \frac{1}{1.25 * 10^{18}s^{-1}}\\\\T = 8.0 * 10^{-19}s[/tex]
Therefore, the time period of the electromagnetic wave is 8.0 × 10⁻¹⁹ seconds.
Learn more: https://brainly.com/question/24094163
The surface of the paper is phosphorescent. When light shines on it, some of the energy is absorbed and re-emitted slowly over time. The blue LED causes the surface to glow, but the green LED does not. Would a red LED to cause the surface to glow? Select the best answer from the choices provided. View Available Hint(s) Select the best answer from the choices provided. No Yes
Answers
Answer:
No
Explanation:
Recall that the hierarchy of wavelength color from minimum wavelength to maximum wavelength is:
[tex]V < I < B < G < Y < O < R;[/tex] and
[tex]E \ \alpha \ \dfrac{1}{\lambda}[/tex]
As a result, blue light has a higher energy level than green and red light.
As a result, the surface glows due to the blue LED. The green LED, on the other hand, would not allow the surface to glow as much as the red LED, which has a lower energy level when compared to the green light. As a result, the red LED would not allow the surface to glow as well.
Which choice is an example of an effect of agricultural techniques on the environment? increased oxygen levels in a pond due to fertilizer runoff sediment accumulation in a lake near a farm soil compaction caused by tillage increased plant growth caused by application of herbicides
Answers
Answer:
sediment accumulation in a lake near a farm.
Explanation:
In Agriculture, there are various techniques adopted by farmers for the growth and development of their crops. An effective and efficient agricultural technique would have a significant impact on the level of productivity attained by the farmers and as such meeting the unending requirements or needs of the consumers.
There are various agricultural techniques used in farming and these includes;
I. Mixed farming.
II. Arable farming.
III. Pastoral farming.
IV. Bush fallowing.
V. Shifting cultivation.
VI. Nomadic herding.
VII. Subsistence farming.
Generally, these agricultural techniques adopted by farmers has an effect or impact on the environment where it is practiced.
For example, one of such effect on the environment is the accumulation of sediments in a lake near the farm. Thus, this could lead to the formation of new materials such as silt, sand, clay, organic debris, etc., inside the lake.
Answer:
sediment accumulation in a lake near a farm.
Explanation:
∁=f
E=hf
c=3x108m/s h=6.63x10-34 J*s
The spectrum of Hydrogen is in the picture below.
ShapeWrite their wavelength (m), frequency (Hz), speed (m/s), and energy (J).
ShapeShapeShape
wavelength
frequency
speed
energy
404x10-9m
4.04x10-7m
7.42x1014 Hz
3x108 m/s
4.92x10-19J
447 nm à ______________ m à f=_______________________ à E= __________________
471 nm à ______________ m à f=_______________________ à E= __________________
501 nm à ______________ m à f=_______________________ à E= __________________
587 mm à ______________ m à f=_______________________ à E= __________________
667 mm à ______________ m à f=_______________________ à E= __________________
2.56 m à ______________ m à f=_______________________ à E= __________________
Answers
Answer:
so you have a question
Explanation:
either way have a nice day
ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP NEED HELP ASAP
Answers
Answer:
I don’t know what that is I’m sorry
Explanation:
Answer:
tbh i wish i can help
Explanation:
please answer this im not sure
Answers
Answer:
the answer is B
When jumping straight down, you can be seriously injured if you land stiff-legged. One way to avoid injury is to bend your knees upon landing to reduce the force of the impact. A 75-kg man just before contact with the ground has a speed of 5.5 m/s.
(a) In a stiff-legged landing he comes to a halt in 1.5 ms. Find the average net force that acts on him during this time.
275735 N
(b) When he bends his knees, he comes to a halt in 0.08 s. Find the average force now.
? N
(c) During the landing, the force of the ground on the man points upward, while the force due to gravity points downward. The average net force acting on the man includes both of these forces. Taking into account the directions of these forces, find the force of the ground on the man in parts (a) and (b).
stiff legged landing 275735 N
bent legged landing ??? N
Answers
Answer:
a)[tex]F_{net} =275000N[/tex]
b)[tex]F_{net}'= 386718.75N[/tex]
Explanation:
From the question we are told that:
Man's Mass [tex]M=75kg[/tex]
Speed of man [tex]V_m=5.5m/s[/tex]
a)
Landing time [tex]t_l=1.5ms[/tex]
Generally the equation for average net force F_{ net} is mathematically given by
[tex]F_{net} = 75 *5.5 /(0.0015) N[/tex]
[tex]F_{net} =275000N[/tex]
b)
Landing time [tex]t=0.08s[/tex]
Generally the equation for average net force[tex]F_{ net}[/tex] is mathematically given by
[tex]F_{net}' = impulse /time \\ F_{net}'= \frac{m * u}{t}[/tex]
[tex]F_{net}'= \frac{75 * 5.5}{0.08}[/tex]
[tex]F_{net}'= 386718.75N[/tex]
What is the difference between center of mass and center of gravity?
Answers
Answer:
Centre of mass is the point at which the distribution of mass is equal in all directions, and does not depend on gravitational field. Centre of gravity is the point at which the distribution of weight is equal in all directions, and does depend on gravitational field.
Answer:
Centre of mass is the point at which the distribution of mass is equal in all directions, and does not depend on gravitational field.
Centre of gravity is the point at which the distribution of weight is equal in all directions, and does depend on gravitational field.
hope this helps you ☺️☺️
Quia
Active
16:05:5
A plant root is an example of
Answers
Answer:A plant root is an example of an organ
Explanation:The main function of the root is to collect nutrients and water from the soil.
Answer:
hi sorry i just want points YOSHIII :3
Explanation:
Which diagram best represents the electric field around a negatively charged conducting sphere? (See pic)
Answers
The diagram which represents the electric field around a negatively charged conducting sphere is: Image D.
What is an electric charge?An electric charge can be defined as a fundamental, physical property of matter, that typically governs how particles are affected by an electric field or electromagnetic field, especially due to the presence of an electrostatic force.
The electric field around a negatively charged conducting sphere are all attracted to the sphere in accordance with the law of electrostatic forces, as depicted by Image D in the given diagram.
Read more on charge here: brainly.com/question/4313738
Should there be a salary cap for professional athletes?
Answers
answer:
From the fan side: Salary caps mean better competition and more parity between all teams in a given league (in theory, anyway). Salary caps in the NFL, NBA and NHL can foster this, but in MLB, luxury tax requirements may not be enough to prevent large-market teams from dominating.
plz mark me as brainliest plzzzz
Which particles
are
electrically neutral?
А
electrons
B
protons
C
neutrons
D
all of the above
For flocabulary
Answers
Answer:
C. Neutrons
Explanation:
Protons +
Electron -
in the early solar system,comets that struck earth may have brought in
A.water
B.advanced life
c.plankton
D.all of the above
Answers
[tex]\huge{\mathbb{\tt { QUESTION↓}}}[/tex]
In the early solar system,comets that struck earth may have brought in
[tex]\color{green}{\tt{O} \: \: \color{black}{\tt {A.water}}}[/tex]
[tex]\color{green}{\tt{O} \: \: \color{black}{\tt {B.Advanced Life}}}[/tex]
[tex]\color{green}{\tt{O} \: \: \color{black}{\tt {C.Plankton}}}[/tex]
[tex]\color{green}{\tt{O} \: \: \color{black}{\tt {D. All \: of \: the \: above}}}[/tex]
[tex]\huge{\mathbb{\tt { ANSWER↓}}}[/tex]
[tex]\color{red}{\tt {D. \: All \: of \: the \: above}}[/tex]
[tex]\color{black}{\tt {because \: the \: true \: answer \: is \: comet}}[/tex]
[tex]{\boxed{\boxed{\tt{WHAT \: IS \: COMET?}}}}[/tex]
[tex]\color{black}{\tt{A \: comet \: is \: an \: icy, \: small \: Solar \: System \: body}}[/tex]
[tex]\color{black}{\tt { that, \: when \: passing \: clos \: e to}}[/tex]
[tex] \color{black}{\tt {the \: Sun, \: warms \: and \: begins \: to \: release}}[/tex]
[tex]\color{black}{\tt { gases, \: a \: process \: that \: is \: called \: outgassing. }}[/tex]
[tex]\color{black}{\tt{This \: produces \: a \: visible \: atmosphere \: or \: coma,}}[/tex]
[tex]\color{black}{\tt{and \: sometimes \: also \: a \: tail}}[/tex]
#CarryOnLearning
#LetsEnjoyTheSummer
→XxKim02xXSarah is a 30 year old white female. Her occupation is part time chef. She is recently been divorced and has custody of
her three children. She has extreme changes in her mood that began to appear in her 20's but she never went to
see a
doctor about them. When family tries to talk to her about her upset, she reacts by becoming angry and blaming them
for her situation. She is currently complaining of crying episodes, not eating, headaches, thinking she is a failure,
spending most of her time in bed, and not being interested in activities she once enjoyed doing with her kids, such as
going to the park and seeing movies. Her mother and grandfather also showed signs of mental illness and she
reported that her mom has taken Depakote before, which helped. Sarah wants to open her own restaurant and move to
a bigger house.
1. Please answer the following questions by referring to the above case study and the assigned reading for this
unit:
• What psychological and physical symptoms does Sarah present with?
. What is the primary psychological disorder diagnosis that fits her symptoms based on the disorders
described in the textbook?
Answers
Answer:
how to deal with devoirce
Explanation:
The psychological and physical symptoms that Sarah presents include:
She frequently has headaches.She also has a loss of appetite.She gets angry easily.From the information given, we can infer that some of the symptoms include the fact that Sarah frequently has headaches, loss of appetite, and gets angry easily.
The primary psychological disorder diagnosis that fits her symptoms based on the disorders will be depression. She's depressed because she just got divorced. This has taken a toll on her health.
Read related link on:
https://brainly.com/question/19276767
As the Moon revolves around the Earth, it also rotates on its axis. Why is it that the same side of the Moon is always visible from Earth?
Answers
Answer: The speed of the moon's rotation keeps the same side always facing Earth.
Explanation: Please mark me brainiest
Answer:
The speed of the Moon's rotation keeps the same side always facing Earth.
Explanation:
got it right on study island :)
Light travels through a vacuum at a speed of 3 x 10 m/s. What is the speed of
light in water if the index of refraction is 1.333?
Answers
Answer:
v = c / n (n = 1 for air)
v = c / 1.33 = 3 * 10E8 m/s / 1.33 = 2.25 * 10E8 m/s
. Name two ways to decrease the electric force between two charged object
Answers
Answer:
breaking the circuit
Explanation:
Total momentum before a collision is equal to total momentum after a collision.what does this define
Answers
Answer:haha
Explanation:dont know
HELP QUICK! Please can anyone do the other half for me
Answers
Answer:
9) c
10) c
11) d
12) d
Explanation:
I think it's helps you
What does weathering do?
2. What does erosion do?
3. What is physical weathering?
4. what are 3 examples of physical weathering?
5. What is chemical weathering?
6. What are 2 examples of chemical weathering?
7. What is biological weathering?
8. What are 3 examples of biological weathering?
Answers
Answer
Weathering describes the breaking down or dissolving of rocks and minerals on the surface of the Earth. Water, ice, acids, salts, plants, animals, and changes in temperature are all agents of weathering. Once a rock has been broken down, a process called erosion transports the bits of rock and mineral away.
Erosion is the geological process in which earthen materials are worn away and transported by natural forces such as wind or water. A similar process, weathering, breaks down or dissolves rock, but does not involve movement.
Physical weathering is caused by the effects of changing temperature on rocks, causing the rock to break apart. The process is sometimes assisted by water. ... Freeze-thaw occurs when water continually seeps into cracks, freezes and expands, eventually breaking the rock apart.
Swiftly moving water. Rapidly moving water can lift, for short periods of time, rocks from the stream bottom. ...
Ice wedging. Ice wedging causes many rocks to break. ...
Plant roots. Plant roots can grow in cracks.
the erosion or disintegration of rocks, building materials, etc., caused by chemical reactions (chiefly with water and substances dissolved in it) rather than by mechanical processes.
Carbonation. When you think of carbonation, think carbon! ...
Oxidation. Oxygen causes oxidation. ... or
Hydration. This isn't the hydration used in your body, but it's similar. ...
Biological weathering is weathering caused by plants and animals. Plants and animals release acid forming chemicals that cause weathering and also contribute to the breaking down of rocks and landforms. Chemical weathering is weathering caused by breaking down of rocks and landforms.
Burrowing animals like shrews, moles, earthworms, and even ants contribute to biological weathering. ...
When animals like birds forage for seeds and earthworms, they create holes and erode the upper surface of the soil, thus, contributes to weathering.
rabbits and other burrowing animals can burrow into a crack in a rock, making it bigger and splitting the rock. You may have seen weeds growing through cracks in the pavement.
Explanation:
Hope this helps you!!
According to Lenz's law, the current is induced in the closed conducting loop in such a direction that the magnetic field induced by this current opposes the change in the flux through the loop.
a. True
b. False
Answers
Answer:
True
Explanation:
It is true that the real definition of lenz's law in magnetism is the current is induced in the closed conducting loop in such a direction that the magnetic field induced by this current opposes the change in the flux through the loop.
This means that induced current opposes the very cause that produces it.