Human mitochondrial genome - The mitochondrial genome is a circular DNA molecule that is separate from the nuclear genome. It is relatively small in size, consisting of only about 16.6 kilobase pairs (kbp) in humans. It encodes only a small number of genes that are involved in mitochondrial function.
Nucleosome - A nucleosome is a basic structural unit of DNA in eukaryotic cells. It consists of a segment of DNA wrapped around a core of histone proteins. The amount of DNA contained in a nucleosome is approximately 147 base pairs.
Topologically associated domain (TAD) - A TAD is a large region of DNA that is defined by its three-dimensional interactions. It includes a range of genes and regulatory elements, and can span hundreds of kilobase pairs. However, the precise size of a TAD can vary depending on the cell type and developmental stage.
Chromatid - A chromatid is a single, replicated strand of DNA that is tightly coiled and condensed during mitosis and meiosis. Each chromatid contains a full copy of the genome of the cell, which in humans consists of approximately 6.4 billion base pairs. However, since each chromatid is only one-half of the full chromosome, the actual amount of DNA contained in a single chromatid is roughly 3.2 billion base pairs.
For more such question on DNA
https://brainly.com/question/16099437
#SPJ11
Rank of the structures are :1. Nucleosome, Human mitochondrial genome ,3. Chromatid , 4. Topologically associated domain (TAD)
1. Nucleosome: The nucleosome is the basic structural unit of DNA packaging in eukaryotes. It consists of a segment of DNA wrapped around a core of eight histone proteins. The length of DNA in a nucleosome is approximately 146 base pairs, making it the structure with the least amount of DNA.
2. Human mitochondrial genome: The mitochondrial genome is a small, circular DNA molecule found within the mitochondria of eukaryotic cells. In humans, the mitochondrial genome contains approximately 16,569 base pairs, encoding for 37 genes. This structure has more DNA than a nucleosome but less than the other two structures mentioned.
3. Chromatid: A chromatid is one of two identical halves of a replicated chromosome. Before cell division, the DNA in a chromosome is duplicated, resulting in two chromatids connected by a centromere. The length of DNA in a single chromatid is equal to the length of the entire chromosome, which can be up to several hundred million base pairs in humans, depending on the specific chromosome.
4. Topologically associated domain (TAD): TADs are large, self-interacting genomic regions within the 3D organization of the genome. They can encompass several million base pairs of DNA and contain multiple genes and regulatory elements. As the largest of the four structures mentioned, TADs contain the most DNA.
learn more about mitochondrial genome Refer: https://brainly.com/question/31837855
#SPJ11
the chemical analysis of a macromolecule has been provided. what is this macromolecule?
The chemical analysis provided to the key characteristics of each macromolecule. To determine the identity of the macromolecule from the chemical analysis provided, please follow these steps:
1. Examine the chemical analysis for the presence of specific elements and molecular structures.
2. Compare the analysis to the four major types of macromolecules: carbohydrates, lipids, proteins, and nucleic acids.
3. Look for the following features in the analysis:
- Carbohydrates: Composed of carbon, hydrogen, and oxygen with a general formula of Cm(H2O)n, where m and n are integers.
- Lipids: Made up of carbon, hydrogen, and oxygen atoms, with a higher ratio of hydrogen to oxygen than carbohydrates. They also include structures like fatty acids, glycerol, and sterols.
- Proteins: Composed of amino acids containing carbon, hydrogen, oxygen, and nitrogen atoms. They may also include sulfur atoms in some cases.
- Nucleic acids: Made up of nucleotides containing a sugar, phosphate group, and nitrogenous base. They include DNA and RNA.
4. Match the elements and molecular structures from the chemical analysis to one of these macromolecule types.
By following these steps and comparing the chemical analysis provided to the key characteristics of each macromolecule, you can identify the specific macromolecule in question.
Based on the given data, the macromolecule is most likely a nucleic acid, specifically DNA or RNA.
Nucleic acids are large biomolecules that contain carbon (C), hydrogen (H), oxygen (O), nitrogen (N), phosphorus (P), and sometimes sulfur (S). The percentages of these elements align closely with the composition of nucleic acids.
The percentage of carbon (C) at 40% suggests the presence of a significant number of carbon atoms, which is consistent with nucleic acids. Hydrogen (H) at 10% and oxygen (O) at 33% are also within the expected range for nucleic acids.
The percentage of nitrogen (N) at 16% is particularly significant because nucleic acids, DNA, and RNA all contain nitrogenous bases, which contribute to their structure and function. Phosphorus (P) at 0.1% is also characteristic of nucleic acids since they contain phosphate groups.
The presence of a small amount of sulfur (S) at 1% further supports the identification of the macromolecule as a nucleic acid since some nucleic acids, such as certain RNA molecules, can contain sulfur.
In conclusion, based on the elemental composition provided, the macromolecule is likely a nucleic acid, such as DNA or RNA.
learn more about macromolecule here:
https://brainly.com/question/18337551
#SPJ11
The complete question is
What is the identity of the macromolecule based on the chemical analysis provided in the following image?
An inert electrode must be used when one or more species involved in the redox reaction are:Select the correct answer below:good conductors of electricitypoor conductors of electricityeasily oxidizedeasily reduced
An inert electrode must be used when one or more species involved in the redox reaction are poor conductors of electricity. Inert electrodes, like graphite or platinum, do not participate in the reaction and only serve as a surface for the transfer of electrons.
An inert electrode must be used when one or more species involved in the redox reaction are easily oxidized or easily reduced. This is because if a reactive electrode is used, it could participate in the reaction itself and affect the overall outcome of the reaction.
Inert electrodes, on the other hand, do not participate in the reaction and only serve as a conductor of electricity. Therefore, the correct answer to the question is either "easily oxidized" or "easily reduced."
To know more about electrode visit :-
https://brainly.com/question/17060277
#SPJ11
Answer:
poor conductors of electricity
Explanation:
If a substance involved in the redox reaction conducts electricity poorly, it cannot serve as an effective electrode. In this case, an inert electrode can be used to act as an electron sink or source in solution.
The isoelectric point, pI, of the protein horse liver alcohol dehydrogenase is 6.8, while that of hexokinase P-II is 4.93. What is the net charge of horse liver alcohol dehydrogenase at pH5.1 ? What is the net charge of hexokinase P-II at pH5.5 ?
At pH 5.1, horse liver alcohol dehydrogenase will have a net positive charge of approximately +2.9.
At pH 5.5, hexokinase P-II will have a net negative charge of approximately -3.25.
Find the charge of horse liver alcohol dehydrogenase and hexokinase P-II at given pH values.To calculate the net charge of the proteins at the given pH values, we need to compare the pH with the isoelectric point (pI) of the proteins.
For horse liver alcohol dehydrogenase:
If pH < pI, the protein is positively charged.
If pH > pI, the protein is negatively charged.
If pH = pI, the protein has no net charge.
Given that pH = 5.1 and pI = 6.8, we have pH < pI, so the protein will be positively charged. To determine the magnitude of the charge, we need to calculate the difference between the pH and pI values and convert it into a log scale using the Henderson-Hasselbalch equation:
pH - pI = log([A-]/[HA])
where [A-] is the concentration of deprotonated acidic groups (negative charges), and [HA] is the concentration of protonated acidic groups (neutral charges).
Assuming that the only acidic group present in horse liver alcohol dehydrogenase is the carboxyl group of the amino acid residues, which has a pKa of around 2.2, we can calculate the ratio of [A-]/[HA] at pH 5.1 as:
[A-]/[HA] = 10^(pH-pKa) = 10^(5.1-2.2) = 794.33
Taking the negative logarithm of this value gives us the number of charges per molecule:
-log([A-]/[HA]) = -log(794.33) = 2.9
For hexokinase P-II:
If pH < pI, the protein is positively charged.
If pH > pI, the protein is negatively charged.
If pH = pI, the protein has no net charge.
Given that pH = 5.5 and pI = 4.93, we have pH > pI, so the protein will be negatively charged. Using the same approach as before, we can calculate the ratio of [A-]/[HA] at pH 5.5 as:
[A-]/[HA] = [tex]10^(^p^H^-^p^K^a^)[/tex] = [tex]10^(^5^.^5^-^2^.^2^)[/tex] = 1778.28
Taking the negative logarithm of this value gives us the number of charges per molecule:
-log([A-]/[HA]) = -log(1778.28) = 3.25
Learn more about charge
brainly.com/question/11944606
#SPJ11
calculate the enthalpy change for the following reaction given: dc-h= 414 kj/mol, dcl-cl=243 kj/mol, dc-cl=339 kj/mol, dh-cl=431 kj/mol. ch4 cl2 → ch3cl hcl
To calculate the enthalpy change for the given reaction: CH4 + Cl2 → CH3Cl + HCl, we will use the bond enthalpies provided (DC-H, DCl-Cl, DC-Cl, DH-Cl). We'll follow these steps:
1. Determine the bonds broken in the reactants.
2. Determine the bonds formed in the products.
3. Calculate the total enthalpy change for the reaction.
Step 1: Bonds broken in reactants:
- 1 DC-H bond in CH4 (414 kJ/mol)
- 1 DCl-Cl bond in Cl2 (243 kJ/mol)
Step 2: Bonds formed in products:
- 1 DC-Cl bond in CH3Cl (339 kJ/mol)
- 1 DH-Cl bond in HCl (431 kJ/mol)
Step 3: Calculate the total enthalpy change for the reaction:
Enthalpy change = (Σ bond enthalpies of bonds broken) - (Σ bond enthalpies of bonds formed)
Enthalpy change = (414 kJ/mol + 243 kJ/mol) - (339 kJ/mol + 431 kJ/mol)
Enthalpy change = (657 kJ/mol) - (770 kJ/mol)
Enthalpy change = -113 kJ/mol
The enthalpy change for the given reaction CH4 + Cl2 → CH3Cl + HCl is -113 kJ/mol.
To know more about CH4 + Cl2 → CH3Cl + HCl refer here
https://brainly.com/question/24141694#
#SPJ11
The activation energy for the gas phase decomposition of dichloroethane is 207 kJ. CH3 CHCl2 ---->CH2=CHCl + HCl The rate constant at 715 K is 9.82×10-4 /s. The rate constant will be 1.36×10-2 /s at _____ K.
The activation energy for the gas phase decomposition of dichloroethane is 207 kJ. The rate constant at 715 K is 9.82×10-4 /s.
The activation energy for the gas phase decomposition of dichloroethane is 207 kJ. This means that a certain amount of energy, equal to 207 kJ, is required to initiate the reaction. The chemical reaction is as follows: CH3 CHCl2 ---->CH2=CHCl + HCl. The rate constant at 715 K is 9.82×10-4 /s. A rate constant is a measure of the rate of reaction. It is expressed in terms of the concentration of reactants and products in the reaction. Now, we need to calculate the rate constant at a different temperature, which is not given.
To calculate the rate constant at a different temperature, we need to use the Arrhenius equation, which is given by k = Ae^(-Ea/RT), where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T is the temperature in Kelvin. We know the value of Ea, and we can calculate the value of A using the rate constant at 715 K.
Using the given rate constant, we get A = k*e^(Ea/RT) = 9.82×10-4 /s * e^(207000/8.314*715) = 3.17×10^12 /s. Now, we can use this value of A and the given value of Ea to calculate the rate constant at a different temperature.
Let's assume that the temperature at which we want to calculate the rate constant is T2. We can rearrange the Arrhenius equation to get ln(k2/k1) = -(Ea/R)*(1/T2 - 1/T1), where k1 is the rate constant at 715 K, and k2 is the rate constant at T2. Solving for k2, we get k2 = k1*e^-(Ea/R)*(1/T2 - 1/T1). Substituting the given values, we get k2 = 1.36×10-2 /s at T2 = 875 K. Therefore, the rate constant at 875 K is 1.36×10-2 /s.
Know more about Activation Energy of Gas phase here:
https://brainly.com/question/31597248
#SPJ11
Consider the reaction that occurs when copper is added to nitric acid. Cu(s) 4HNO3(aq) mc024-1. Jpg Cu(NO3)2(aq) 2NO2(g) 2H2O(l) What is the reducing agent in this reaction? Cu NO3– Cu(NO3)2 NO2.
In the reaction between copper (Cu) and nitric acid (HNO_{3}), copper acts as the reducing agent.
In a chemical reaction, the reducing agent is the species that donates electrons, leading to a decrease in its oxidation state. In the given reaction, copper (Cu) undergoes oxidation, losing electrons to form Cu^{+2}ions in the product [tex]Cu(NO_{3}) _{2}[/tex].
Cu(s) → [tex]Cu^{+2}[/tex](aq) + 2e-
The oxidation state of copper increases from 0 in the reactant (Cu) to +2 in the product (Cu2+). This indicates that copper loses electrons and gets oxidized. On the other hand, nitric acid (HNO_{3}) is the oxidizing agent in the reaction since it accepts electrons during the reaction. Nitric acid is reduced as nitrogen in HNO_{3} gains electrons and goes from +5 oxidation state to +4 oxidation state in [tex]NO_{2}[/tex]
[tex]HNO_{3}[/tex](aq) + 3e- → NO2(g) + 2[tex]H_{2}O[/tex](l)
Therefore, copper is the reducing agent in this reaction as it undergoes oxidation by losing electrons, while nitric acid acts as the oxidizing agent by accepting those electrons and getting reduced.
Learn more about oxidation here: https://brainly.com/question/31844777
#SPJ11
the /\g of a certain reaction is - 78.84 kj/mol at 25oc. what is the keq for this reaction?
The Keq for the reaction can be calculated using the equation ΔG° = -RTlnKeq, where ΔG° is the standard free energy change, R is the gas constant, T is the temperature in Kelvin, and Keq is the equilibrium constant.
In this case, ΔG° is -78.84 kJ/mol, and assuming standard conditions of 25°C (298 K) and 1 atm pressure, we can plug in the values and solve for Keq -78.84 kJ/mol = -8.314 J/K/mol * 298 K * ln Keq ,-78.84 kJ/mol = -24,736 J/mol * ln(Keq ln(Keq) = 78.84 kJ/mol / 24,736 J/mol ,ln(Keq) = -3.186 ,Keq = e^-3.186 ,Keq = 0.041 Therefore, the explanation is that the Keq for this reaction is 0.041.
Convert the given ΔG from kJ/mol to J/mol: -78.84 kJ/mol * 1000 J/kJ = -78840 J/mol, Convert the temperature from Celsius to Kelvin: 25°C + 273.15 = 298.15 K Use the gas constant, R, in J/(mol·K): R = 8.314 J/(mol·K) ,Rearrange the equation to solve for Keq: ln(Keq) = -ΔG/RT, Substitute the values into the equation: ln Keq = -78840 J/mol / (8.314 J/(mol·K) * 298.15 K, Calculate the value of ln(Keq): ln(Keq) ≈ 31.92 Find the Keq by taking the exponential of the ln(Keq) value: Keq = e^(31.92) ≈ 4.16 x 10^13.
To know more about equilibrium visit :
https://brainly.com/question/30694482
#SPJ11
given this reaction: 2nh3(g)<--->n2(g) 3h2(g) where delta g rxn= 16.4kj/mol; delta h rxn=91.8 kj/mol. the standard molar enthalpy of formation in KJmol −1 of NH3 (g) is
The standard molar enthalpy of formation of NH3(g) is 45.9 kJ/mol.
The standard molar enthalpy of formation of NH3(g) can be calculated using the given values of delta G_rxn and delta H_rxn for the reaction 2NH3(g) <---> N2(g) + 3H2(g).
Using the relation ΔG = ΔH - TΔS, we can first calculate the standard molar entropy change (ΔS) for the reaction. Given that ΔG_rxn = 16.4 kJ/mol and ΔH_rxn = 91.8 kJ/mol, we can rearrange the equation to ΔS = (ΔH - ΔG)/T. Assuming standard conditions (T = 298.15 K), we can calculate ΔS as:
ΔS = (91.8 kJ/mol - 16.4 kJ/mol) / 298.15 K = 0.253 kJ/mol*K
Now, we can use the standard entropy change to calculate the standard molar enthalpy of formation for NH3(g). For the given reaction, the change in the number of moles of gas is:
Δn_gas = 3 - 2 = 1
The standard molar enthalpy of formation of NH3(g) can be expressed as:
ΔH_formation(NH3) = ΔH_rxn / 2 - Δn_gas * R * T * ΔS
Using the given values and the gas constant R = 8.314 J/mol*K, we can calculate the standard molar enthalpy of formation for NH3(g) as:
ΔH_formation(NH3) = (91.8 kJ/mol) / 2 - 1 * (8.314 J/mol*K) * 298.15 K * (0.253 kJ/mol*K) = 45.9 kJ/mol
Therefore, the standard molar enthalpy of formation of NH3(g) is 45.9 kJ/mol.
Know more about Standard molar enthalpy of formation here:
https://brainly.com/question/10583725
#SPJ11
What are three possible products of a double replacement reaction?
Three possible products of a double replacement reaction are AB + CD → AD + CB, where A, B, C, and D represent elements or compounds.
In a double replacement reaction, the cations and anions of two ionic compounds switch places to form two new compounds. One of the products is usually a precipitate, an insoluble solid that separates from the solution. Another product could be a gas that bubbles out of the solution. The third product is typically a soluble salt that remains in the solution.
For example, the double replacement reaction between silver nitrate (AgNO₃) and sodium chloride (NaCl) produces a precipitate of silver chloride (AgCl), a soluble salt sodium nitrate (NaNO₃), and the release of gaseous nitrogen dioxide (NO₂) and oxygen (O₂).
2AgNO₃ + 2NaCl → 2AgCl↓ + 2NaNO₃
The reaction can be used to test for the presence of chloride ions in a solution.
learn more about double replacement reaction here:
https://brainly.com/question/31864474
#SPJ11
Calcium phosphate used in fertilizers can be
made in the reaction described by the fol-
lowing equation:
2H3PO4(aq) + 3Ca(OH)(aq) —
Ca3(PO4)2(s) + 6H2O(aq)
What mass in grams of each product would
be formed if 7. 5 L of 5. 00 M phosphoric acid
reacted with an excess of calcium hydroxide?
To determine the mass of each product formed in the reaction between 7.5 L of 5.00 M phosphoric acid and an excess of calcium hydroxide, the stoichiometry of the reaction needs to be considered. The molar ratio between the reactants and products can be used to calculate the mass of each product.
The balanced equation for the reaction is [tex]2H_3PO_4(aq) + 3Ca(OH)_2(aq)[/tex] → [tex]Ca_3(PO_4)_2(s) + 6H_2O(aq).[/tex]
First, we need to calculate the number of moles of phosphoric acid used. To do this, we multiply the volume (7.5 L) by the molarity (5.00 M) to obtain the moles of H3PO4: 7.5 L × 5.00 mol/L = 37.5 mol.
Based on the stoichiometry of the reaction, we know that for every 2 moles of [tex]H_3PO_4[/tex], 1 mole of [tex]Ca_3(PO_4)_2[/tex] is formed. Therefore, the moles of [tex]Ca_3(PO_4)_2[/tex] formed can be calculated as 37.5 mol.
To calculate the mass of [tex]Ca_3(PO_4)_2[/tex] formed, we need to know the molar mass of [tex]Ca_3(PO_4)_2[/tex], which is 310.18 g/mol. Therefore, the mass of [tex]Ca_3(PO_4)_2[/tex] formed is 18.75 mol × 310.18 g/mol = 5,801.25 g.
Since water is also a product, we can calculate the moles of water formed as 6 times the moles of [tex]Ca_3(PO_4)_2[/tex]: 18.75 mol [tex]Ca_3(PO_4)_2[/tex] × 6 mol H2O / 1 mol [tex]Ca_3(PO_4)_2[/tex] = 112.5 mol [tex]H_2O[/tex].
The molar mass of water is 18.015 g/mol, so the mass of water formed is 112.5 mol × 18.015 g/mol = 2,023.12 g.
In summary, when 7.5 L of 5.00 M phosphoric acid reacts with an excess of calcium hydroxide, approximately 5,801.25 grams of calcium phosphate [tex]Ca_3(PO_4)_2[/tex] and 2,023.12 grams of water would be formed.
Learn more about molar ratio here:
https://brainly.com/question/30930200
#SPJ11
identify which compound is more acidic and explain your choice: acetophenone or benzaldehyde
Benzaldehyde is more acidic than acetophenone because its conjugate base is more stable, allowing for better delocalization of the negative charge over the entire phenyl ring.
To determine which compound is more acidic between acetophenone and benzaldehyde, we need to consider their molecular structures and the stability of their conjugate bases.
Understand the molecular structures of acetophenone and benzaldehyde.
Acetophenone has a structure of C6H5C(O)CH3, where a carbonyl group is attached to a methyl group and a phenyl group. Benzaldehyde has a structure of C6H5CHO, where a carbonyl group is directly attached to a phenyl group.
Consider the stability of their conjugate bases.
When a compound loses a hydrogen ion (H+), it forms a conjugate base. A more stable conjugate base indicates a more acidic compound. The conjugate bases of acetophenone and benzaldehyde are formed by losing a hydrogen ion from their carbonyl groups, resulting in a negative charge on the oxygen atom.
Compare the conjugate base stability.
Benzaldehyde's conjugate base has a more stable resonance structure due to the direct attachment of the carbonyl group to the phenyl group, allowing for better delocalization of the negative charge over the entire phenyl ring. In contrast, acetophenone's conjugate base has a less stable resonance structure because the negative charge cannot be delocalized over the entire phenyl ring due to the presence of the methyl group.
In conclusion, benzaldehyde is more acidic than acetophenone because its conjugate base is more stable, allowing for better delocalization of the negative charge over the entire phenyl ring.
Learn more about benzaldehyde
brainly.com/question/31684857
#SPJ11
the following chemical reaction takes place in aqueous solution: zncl2(aq) nh42s(aq)→zns(s) 2nh4cl(aq) write the net ionic equation for this reaction
The net ionic equation for the given chemical reaction is: Zn²⁺(aq) + S²⁻(aq) → ZnS(s). This equation represents the key species involved in the reaction, ignoring the spectator ions.
Here is the net ionic equation for the chemical reaction:
Zn²⁺(aq) + S²⁻(aq) → ZnS(s)
The net ionic equation only includes the species that are directly involved in the chemical reaction and excludes spectator ions, which in this case are NH4+ and Cl-.
The entire symbols of the reactants and products, as well as the states of matter under the conditions under which the reaction is occurring, are expressed in the complete equation of a chemical reaction.
Only those chemical species that are directly involved in the chemical reaction are written in the net ionic equation of the reaction.
In the net ion equation, mass and charge must be equal.
It is utilised in double displacement processes, redox reactions, and neutralisation reactions.
Learn more about net ionic equation here
https://brainly.com/question/22885959
#SPJ11
using the experimental data for pH and the concentration of the solutions, calculate the Ka and Kb for each salt and show your work
solution / value of Ka or Kb
0.1 ZnCl2 0.1 K Al(SO4)2 0.1 NH4Cl 0.1 NaC2H3O2 0.1 Na2CO3
In beta oxidation of linoleic acid, what is the cost in total ATPs for the presence of the two double bonds compared to the saturated carbon chain stearic acid? (hint: how many more electron carriers is produced in beta oxidation for stearic acid vs linoleic acid and how does that affect # of ATPs)
The presence of the two double bonds in linoleic acid increases the number of electron carriers produced during beta oxidation, which ultimately leads to the production of more ATPs.
In beta oxidation of linoleic acid, the cost in total ATPs is higher compared to the saturated carbon chain stearic acid. Linoleic acid has two double bonds, which means that it requires two more rounds of beta oxidation compared to stearic acid, which only requires one. During each round of beta oxidation, one molecule of FADH2 and one molecule of NADH are produced, which can be used to generate ATP through oxidative phosphorylation. Therefore, stearic acid produces two electron carriers in one round of beta oxidation, while linoleic acid produces only one.
Since stearic acid only requires one round of beta oxidation, it produces two electron carriers (FADH2 and NADH) and generates a net of 8 ATPs through oxidative phosphorylation. On the other hand, linoleic acid requires two rounds of beta oxidation, which produces a total of four electron carriers (two FADH2 and two NADH). These four electron carriers can generate a net of 18 ATPs through oxidative phosphorylation.
Therefore, the presence of the two double bonds in linoleic acid increases the number of electron carriers produced during beta oxidation, which ultimately leads to the production of more ATPs. However, the cost of beta oxidation is higher for linoleic acid compared to stearic acid due to the additional rounds required.
To know more about Double bonds visit:
https://brainly.com/question/31535069
#SPJ11
5.00 mL of 0.0020 M Fe(NO_3)_2, 3.00 mL of 0.0020 M KSCN, and 2.00 mL of H_2O are mixed. From the absorbance and calibration curve, the equilibrium concentration of FeNCS^2+ is found to be 6.63 times 10^-5 M. is the equilibrium concentration of SCN^- (in mol/L)? You must show your work for full credit.
The equilibrium concentration of SCN- is directly proportional to the inverse of the absorbance.
The first step is to calculate the initial moles of Fe(NO3)2 and KSCN:
[tex]moles Fe(NO_3)_2 = (0.0020 M) * (5.00 mL / 1000 mL) = 1.00 * 10^-5 moles \\\\moles KSCN = (0.0020 M) * (3.00 mL / 1000 mL) = 6.00 * 10^-6 moles[/tex]
Since FeNCS2+ is in equilibrium, its concentration can be used to find the amount of SCN- that has reacted:
[tex]FeNCS_2+ = 6.63 x 10^-5 M = [SCN-][FeNCS_2+] \\\\[SCN-] = 6.63 x 10^-5 M / [FeNCS_2+][/tex]
Next, we need to find the equilibrium concentration of FeNCS2+ using the absorbance data and calibration curve. Let's assume the absorbance is A:
[tex][FeNCS_2+][/tex] = (A - y-intercept) / slope
where the y-intercept and slope can be obtained from the calibration curve.
Once we know the equilibrium concentration [tex][FeNCS_2+][/tex] , we can calculate the concentration of SCN-:
[SCN-] = [tex]6.63 * 10^-5 M[/tex] /[tex][FeNCS_2+][/tex]
Plugging in the value of [tex][FeNCS_2+][/tex] from the calibration curve, we get:
[SCN-] =[tex]6.63 * 10^-5 M[/tex] / ((A - y-intercept) / slope)
To know more about equilibrium concentration, here
brainly.com/question/16645766
#SPJ4
what is the molar solubility of lead sulfate in 1.0 × 10–3 m na2so4? solubility product constant pbso4 ksp = 1.8 × 10–8 (a) 1.8 × 10–2 (c) 1.8 × 10–5 (b) 1.3 × 10–4 (d) 5.0 × 10–6
The molar solubility of lead sulfate in 1.0 × 10⁻³ m Na2So4 is (c) 1.8 × 10⁻⁵
The molar solubility of a compound is defined as the amount (in moles) of the compound that can dissolve in one liter of a solution. To determine the molar solubility of PbSO₄, we need to calculate the concentration of Pb2+ ions in the presence of 1.0 × 10⁻³ M Na₂SO₄.
The solubility product constant (Ksp) expression for lead sulfate (PbSO₄) is:
PbSO₄ (s) ↔ Pb₂+ (aq) + SO₄⁻²(aq)
The Ksp expression can be written as:
Ksp = [Pb₂][SO4⁻²]
In the presence of 1.0 × 10–3 M Na₂SO₄, the concentration of SO₄⁻² is already given. Therefore, we need to calculate the concentration of Pb₂+ ions in order to determine the molar solubility of PbSO₄.
Using the Ksp expression, we can write:
Ksp = [Pb₂+][SO₄²⁻]
1.8 × 10^-8 = [Pb₂+][SO₄²⁻]
[Pb₂+] = 1.8 × 10^-8 / [SO₄²⁻]
[Pb₂+] = 1.8 × 10^-8 / 0.001
[Pb₂+] = 1.8 × 10^-5 M
Therefore, the molar solubility of PbSO4 in 1.0 × 10⁻³ M Na₂SO₄ solution is 1.8 × 10⁻⁵ M.
Therefore, the correct answer is (c) 1.8 × 10⁻⁵.
To learn more about molar solubility here
https://brainly.com/question/31588030
#SPJ4
Calculate the molarity of a solution made by adding 0.126 g of ammonium acetate to enough water to make 250.0 mL of solution.
A. 3.70 x 10−3 M
B. 5.30 x 10−3 M
C. 6.54 x 10−3 M
D. 8.12 x 10−3 M
E. 8.25 x 10−3 M
The molarity of the solution is 5.30 x 10−3 M (option b).
To calculate the molarity of a solution, we need to know the number of moles of solute present in a given volume of solution.
First convert the mass of ammonium acetate (0.126 g) to moles using its molar mass (77.08 g/mol).
This gives us 0.00163 moles of ammonium acetate. Next, we need to convert the volume of the solution (250.0 mL) to liters (0.250 L).
Finally, we divide the number of moles of ammonium acetate by the volume of the solution in liters to get the molarity. The morality is 5.30 x 10−3 M, which is option B.
For more such questions on molarity, click on:
https://brainly.com/question/30404105
#SPJ11
The molarity is obtained by dividing the number of moles of ammonium acetate by the litres of the solution's volume. Option B has a morality of 5.30 x 103 M.
We need to know how many moles of solute there are in a specific volume of solution in order to calculate the molarity of a solution.
Using the molar mass of ammonium acetate (77.08 g/mol), first convert the mass of ammonium acetate (0.126 g) to moles.
We now have 0.00163 moles of ammonium acetate as a result. The volume of the solution (250.0 mL) must then be converted to litres (0.250 L).
The molarity is obtained by dividing the number of moles of ammonium acetate by the litres of the solution's volume. Option B has a morality of 5.30 x 103 M.
learn more about molarity here:
https://brainly.com/question/8732513
#SPJ11
Treatment of D-mannose with methanol in the presence of an acid catalyst yields four isomeric products having the molecular formula C7H14O6. What are these four products?
The four isomeric products yielded by the treatment of D-mannose with methanol in the presence of an acid catalyst are 1,2;3,4;2,3;4,5-pentamethoxy-1,2,3,4,5-pentahydroxyhexanes.
When D-mannose is treated with methanol and an acid catalyst, it undergoes methylation at the hydroxyl group present on its molecule. Methylation is the addition of a methyl group (-CH3) to a molecule. As there are several hydroxyl groups present on the D-mannose molecule, methylation can occur at any of these hydroxyl groups. Therefore, multiple isomers are formed as a result of this reaction. In this case, four isomers are formed, which have the molecular formula C7H14O6.
In the isomer 1,2-pentamethoxy-1,2,3,4,5-pentahydroxyhexane, the methyl groups are attached to the carbon atoms at positions 1 and 2. In the isomer 3,4-pentamethoxy-1,2,3,4,5-pentahydroxyhexane, the methyl groups are attached to the carbon atoms at positions 3 and 4. In the isomer 2,3-pentamethoxy-1,2,3,4,5-pentahydroxyhexane, the methyl groups are attached to the carbon atoms at positions 2 and 3. In the isomer 4,5-pentamethoxy-1,2,3,4,5-pentahydroxyhexane, the methyl groups are attached to the carbon atoms at positions 4 and 5.
In summary, the treatment of D-mannose with methanol in the presence of an acid catalyst yields four isomeric products with the molecular formula C7H14O6. These isomers differ in the position of the methyl groups on the D-mannose molecule, and they are 1,2;3,4;2,3;4,5-pentamethoxy-1,2,3,4,5-pentahydroxyhexanes.
To learn more about isomers visit:
brainly.com/question/13422357
#SPJ11
a current of 4.55 a is passed through a cu(no3)2 solution. how long, in hours, would this current have to be applied to plate out 6.90 g of copper?
To plate out 6.90 g of copper using a current of 4.55 A, you would need to apply the current for 1.99 hours.
1. Find the moles of copper: 6.90 g / 63.55 g/mol (copper's molar mass) = 0.1086 mol Cu
2. Calculate moles of electrons needed (Cu²⁺ + 2e⁻ → Cu): 0.1086 mol Cu × 2 mol e⁻/mol Cu = 0.2172 mol e⁻
3. Convert moles of electrons to Coulombs (1 mol e⁻ = 96,485 C/mol): 0.2172 mol e⁻ × 96,485 C/mol = 20,955 C
4. Calculate time in seconds (time = charge / current): 20,955 C / 4.55 A = 4,604 s
5. Convert seconds to hours: 4,604 s / 3,600 s/h = 1.99 hours
To know more about moles click on below link:
https://brainly.com/question/31597231#
#SPJ11
When dissolved in water, of HClO4, Ca(OH)2, KOH, HI, which are bases?
Question 5 options:
1) Ca(OH)2 and KOH
2) only HI
3) HClO4 and HI
4) only KOH
When dissolved in water, Ca(OH)2 and KOH are bases. HClO4 and HI are acids. The correct option is (1).
A substance is classified as a base if it accepts protons (H+) when dissolved in water. Ca(OH)2 and KOH both contain hydroxide ions (OH-) that readily accept protons from water, making them bases. On the other hand, HClO4 and HI are both acids.
HClO4 is a strong acid, meaning that it dissociates completely in water, releasing H+ ions. HI is also an acid, as it contains hydrogen ions that are readily released in water.
The basicity or acidity of a substance is determined by its ability to donate or accept protons in a solution. The pH scale, which ranges from 0 to 14, measures the acidity or basicity of a solution.
A pH value below 7 indicates acidity, while a pH above 7 indicates basicity. The neutrality point is pH 7, which corresponds to a solution with an equal concentration of H+ and OH- ions.
To know more about "Basicity" refer here:
https://brainly.com/question/32036292#
#SPJ11
hosw to solve the change in entropy when 0.802 g of silicon is burned in excess oxygen to yield silicon dioxide at 298 k?
To solve for the change in entropy, we can use the equation:
ΔS = nS°(products) - mS°(reactants)
where:
- ΔS is the change in entropy
- n and m are the stoichiometric coefficients of the products and reactants, respectively
- S° is the standard molar entropy of the substance
First, we need to write the balanced chemical equation for the combustion of silicon:
Si + O2 -> SiO2
From the equation, we can see that the stoichiometric coefficient of silicon is 1. Therefore, n = 1.
Next, we need to determine the standard molar entropy of silicon and silicon dioxide. According to standard tables, the values are:
S°(Si) = 18.8 J/(mol K)
S°(SiO2) = 41.8 J/(mol K)
Now we can substitute the values into the equation:
ΔS = nS°(SiO2) - mS°(Si)
Since all the silicon is consumed, m = 0.802 g / (28.09 g/mol) = 0.0286 mol.
ΔS = 1(41.8 J/(mol K)) - 0.0286 mol(18.8 J/(mol K))
ΔS = 0.919 J/K
Therefore, the change in entropy when 0.802 g of silicon is burned in excess oxygen to yield silicon dioxide at 298 K is 0.919 J/K.
To know more about entropy refer here
https://brainly.com/question/13135498#
#SPJ11
Fatty acid degradation proceeds through repeated cycles of Boxidation with each cycle containing four reactions. Arrange the four enzymes that catalyze these reactions in order from first to last. 3-hydroxyacyl-COA dehydrogenase Acyl-CoA dehydrogenase B-ketoacyl-CoA thiolase Enoyl-CoA hydratase
The order of the four enzymes that catalyze the reactions in the fatty acid degradation cycle, from first to last, is as follows :- Acyl-CoA dehydrogenase, Enoyl-CoA hydratase, B-ketoacyl-CoA thiolase, 3-hydroxyacyl-COA dehydrogenase.
The enzymes are arranged in the order in which they act on the fatty acid molecule during each cycle of the degradation.
During each cycle of the fatty acid degradation, the acyl-CoA molecule is oxidized by acyl-CoA dehydrogenase to produce a trans-Δ2-enoyl-CoA. The enoyl-CoA molecule is then hydrated by enoyl-CoA hydratase to produce a β-hydroxyacyl-CoA.
This molecule is then oxidized by 3-hydroxyacyl-COA dehydrogenase to produce a β-ketoacyl-CoA. Finally, this molecule is cleaved by B-ketoacyl-CoA thiolase to produce acetyl-CoA and a new, shorter acyl-CoA molecule, which can enter another cycle of the fatty acid degradation.
To know more about enzymes refer here :-
https://brainly.com/question/17292676#
#SPJ11
Give the major organic product of each reaction of methyl pentanoate with the given 6 reagents under the conditions shown. Do not draw any byproducts formed.
−→−−−−−Reagent→Reagent Product
a. Reaction with NaOH,H2ONaOH,H2O, heat; then H+,H2OH+,H2O.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHO
b. Reaction with (CH3)2CHCH2CH2OH(CH3)2CHCH2CH2OH (excess), H+H+.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHO
c. Reaction with (CH3CH2)2NH(CH3CH2)2NH and heat.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHNO
d. Reaction with CH3MgICH3MgI (excess), ether; then H+/H2OH+/H2O.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHO
e. Reaction with LiAlH4LiAlH4, ether; then H+/H2OH+/H2O.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHO
f. Reaction with DIBAL (diisobutylaluminum hydride), toluene, low temperature; then H+/H2OH+/H2O.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHO
The major organic product for this reaction sequence is pentanoic acid.
a. NaOH, H₂O, heat; then H⁺, H₂O:
The reaction with NaOH and heat will result in the saponification of methyl pentanoate to form sodium pentanoate and methanol. The sodium pentanoate will then be protonated with H+ and form the corresponding pentanoic acid.
The major organic product for this reaction sequence is pentanoic acid.
b. (CH₃)₂CHCH₂CH₂OH (excess), H+:
The reaction with (CH₃)₂CHCH₂CH₂OH and H+ is an example of an esterification reaction, which will result in the formation of an ester product.
The major organic product for this reaction is isopentyl pentanoate.
c. (CH₃CH₂)₂NH, heat:
The reaction with (CH₃CH₂)₂NH and heat is an example of an amide formation reaction, which will result in the formation of an amide product.
The major organic product for this reaction is N,N-diethylpentanamide.
d. Reaction with CH₃MgI(excess), ether; then H+/H₂O:
The reaction with CH₃MgI and excess will result in the formation of a Grignard reagent which will act as a nucleophile and attack the carbonyl group of methyl pentanoate to form a new carbon-carbon bond. The resulting product will have an alcohol functional group.
The major organic product for this reaction sequence is 3-hydroxypentanoic acid.
e. Reaction with LiAlH₄, ether; then H+/H₂O:
The reaction with LiAlH₄ is a reduction reaction, which will reduce the carbonyl group of methyl pentanoate to an alcohol group. The resulting product will have a primary alcohol functional group.
The major organic product for this reaction sequence is 3-pentanol.
f. Reaction with DIBAL (diisobutylaluminum hydride), toluene, low temperature; then H+/H₂O:
The reaction with DIBAL is a reduction reaction, which will reduce the ester group of methyl pentanoate to an aldehyde group. The aldehyde group can then be further reduced to an alcohol group with H+/H₂O.
The major organic product for this reaction sequence is 3-pentanol.
The Correct Question is:
Give the major organic product of each reaction of methyl pentanoate with the following reagents under the conditions shown. Do not draw any byproducts formed.
a. NaOH, H₂O, heat; then H+, H₂O
b. (CH₃)₂CHCH₂CH₂OH (excess), H+
c. (CH₃CH₂)₂NH, heat
d. Reaction with CH₃MgI(excess), ether; then H+/H₂O
e. Reaction with LiAlH₄, ether; then H+/H₂O
f. Reaction with DIBAL (diisobutylaluminum hydride), toluene, low temperature; then H+/H₂O
To know more about pentanoic acid follow the link:
https://brainly.com/question/16945257
#SPJ4
Imagine a sealed plastic bag containing a gas a 40 F. If we increased the
temperature of the gas ten times what would happen? What gas law(s)
is(are) here in play?
If the temperature of a sealed plastic bag containing a gas is increased ten times, the volume of the gas will increase proportionally.
According to the Ideal Gas Law, the pressure, volume, and temperature of a gas are related. When the temperature of a gas is increased, the particles within the gas will gain more energy and move faster, causing an increase in pressure and volume.
In this specific scenario, if the temperature of the gas in the sealed plastic bag were to increase ten times, the volume of the gas would also increase ten times due to the direct relationship between temperature and volume in the Ideal Gas Law.
This increase in volume could potentially cause the plastic bag to expand or even burst open if the pressure becomes too great. It is important to note that other factors, such as the amount of gas and pressure within the sealed plastic bag, would also play a role in determining the outcome of this scenario.
Learn more about potentially here.
https://brainly.com/questions/28300184
#SPJ11
calculate the total volume of gas (at 127 ∘c ∘ c and 747 mmhg m m h g ) produced by the complete decomposition of 1.44 kg k g of ammonium nitrate.
The total volume of gas produced by the complete decomposition of 1.44 kg k g of ammonium nitrate is 33.5 L.
The decomposition reaction of ammonium nitrate is given by:
NH4NO3(s) → N2(g) + 2H2O(g)
From the balanced chemical equation, we can see that 1 mole of ammonium nitrate produces 1 mole of nitrogen gas and 2 moles of water vapor. The molar mass of NH4NO3 is 80.04 g/mol, so 1.44 kg of NH4NO3 is equal to 18 moles.
To find the volume of gas produced, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the temperature from Celsius to Kelvin:
T = 127°C + 273.15 = 400.15 K
Next, we need to convert the pressure from mmHg to atm:
747 mmHg / 760 mmHg/atm = 0.981 atm
Now we can plug in the values and solve for V:
V = nRT/P = (1 mole N2)(0.08206 L·atm/mol·K)(400.15 K)/0.981 atm
= 33.5 L
Therefore, the total volume of gas produced by the complete decomposition of 1.44 kg of ammonium nitrate at 127°C and 747 mmHg is 33.5 L.
For more questions on ammonium nitrate:
https://brainly.com/question/13678113
#SPJ11
The total volume of gas produced by the complete decomposition of 1.44 kg of ammonium nitrate at 127°C and 747 mmHg is 960.4 L.
Explanation: To solve this problem, we need to use the ideal gas law, PV=nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. We can first find the number of moles of gas produced by calculating the amount of ammonium nitrate in moles (1.44 kg divided by the molar mass of NH4NO3), then multiplying by the stoichiometric ratio of gas produced per mole of ammonium nitrate (2 moles of gas per mole of NH4NO3).
Next, we can use the given temperature and pressure to convert the number of moles of gas into volume using the ideal gas law. It's important to note that the given temperature is in Celsius, so we need to convert it to Kelvin by adding 273.15. After plugging in the values and solving for V, we get a total volume of 960.4 L.
Learn more about ammonium nitrate here :
brainly.com/question/13678113
#SPJ11
A typical airbag in a car is 139 liters. How many grams of sodium azide needs to be loaded into an airbag to fully inflate it at standard temperature and pressure?
Approximately 0.268 grams of sodium azide needs to be loaded into the airbag to fully inflate it at standard temperature and pressure.
To calculate the amount of sodium azide required to inflate an airbag, we first need to understand the chemical reaction that takes place. The sodium azide reacts with the potassium nitrate inside the airbag to produce nitrogen gas, which inflates the bag. The reaction is as follows:
[tex]2NaN_3 + 2KNO_3 \rightarrow3N_2 + 2Na_2O + K_2O[/tex]
From the balanced chemical equation, we can see that 2 moles of sodium azide (NaN3) react to produce 3 moles of nitrogen gas (N2).
The volume of the airbag is given as 139 liters, which is equivalent to 0.139 cubic meters. At standard temperature and pressure (STP), the volume of one mole of gas is 22.4 liters. Therefore, the number of moles of nitrogen gas required to fill the airbag is:
n = V/STP = 0.139/22.4 = 0.00620 moles
To produce 3 moles of nitrogen gas, we need 2 moles of sodium azide. Therefore, the number of moles of sodium azide required is:
n(NaAzide) = (2/3) x n(N2) = (2/3) x 0.00620 = 0.00413 moles
The molar mass of sodium azide is 65 grams/mole. Therefore, the mass of sodium azide required to inflate the airbag is:
Mass = n(NaAzide) x Molar mass = 0.00413 x 65 = 0.268 grams
For more such questions on sodium azide
https://brainly.com/question/28379904
#SPJ11
To fully inflate an airbag, about 50 grams of sodium azide is required. This chemical is stored in the airbag and when the sensor detects a crash, it is ignited, producing nitrogen gas which inflates the bag.
Sodium azide is a highly toxic and explosive substance, and must be handled with great care during the manufacturing and installation of airbags. Once the airbag is deployed, the nitrogen gas produced by the reaction of sodium azide with a metal oxide is harmless and rapidly dissipates into the atmosphere.It is important to note that tampering with an airbag or attempting to remove sodium azide from an airbag is extremely dangerous and should never be attempted. Only trained professionals should handle airbag installation and removal.
Learn more about sodium here:
brainly.com/question/28379904
#SPJ11
What is the concentration of H+ in solution given the [OH] = 1.32 x 10^-4? A) 1.0 x 10^14 M B) 7.58 x 10^-11 M C) 1.32 x 10^-11 M D) not enough information E) none of the above
Option B) 7.58 x 10⁻¹¹ M is the concentration of H+ in solution given the [OH] = 1.32 x 10⁻⁴ will be 1.32 x 10⁻¹¹ M.
We can use the fact that the product of the concentration of hydrogen ions (H⁺) and hydroxide ions (OH⁻) in a solution is equal to 1 x 10⁻¹⁴ M² at 25°C. This is known as the ion product constant of water (Kw).
Mathematically, we can write:
Kw = [H⁺][OH⁻] = 1 x 10⁻¹⁴ M²
We are given the concentration of hydroxide ions as [OH⁻] = 1.32 x 10⁻⁴ M. We can use this information and the Kw equation to calculate the concentration of hydrogen ions:
[H⁺] = Kw / [OH⁻]
[H⁺] = (1 x 10⁻¹⁴ M²) / (1.32 x 10⁻⁴ M)
[H⁺] = 7.58 x 10⁻¹¹ M
Therefore, the concentration of H⁺ in solution is 7.58 x 10⁻¹¹ M, which is option B.
learn more about hydrogen here:
https://brainly.com/question/20309096
#SPJ11
arrange the following compounds in order of decreasing boiling point, putting the compound with the highest boiling point first. a) I > II > III. b) I > III > II. c) III > I > II. d) III > II > I.
The correct order of decreasing boiling points is: I > III > II. The closest answer choice is b) I > III > II.
The order of boiling points of the given compounds can be determined by analyzing their intermolecular forces, which are influenced by the molecular weight, polarity, and ability to form hydrogen bonds.
I. CH3CH2CH2CH2NH2 (1-amino-butane): This compound can form hydrogen bonds between the NH2 group and the adjacent molecules, and it also has a higher molecular weight than the other two compounds, which increases its boiling point.
II. CH3CH2OCH2CH3 (diethyl ether): This compound is polar due to the oxygen atom, but it cannot form hydrogen bonds, which reduces its boiling point compared to compound I.
III. CH3CH2CH2CH2OH (1-butanol): This compound is also polar and can form hydrogen bonds, but its molecular weight is lower than that of compound I, which reduces its boiling point.
For more question on boiling points click on
https://brainly.com/question/29233996
#SPJ11
correct question
arrange the following compounds in order of decreasing boiling point, putting the compound with the highest boiling point first.
I. CH3CH2CH2CH2NH2
II. CH3CH2OCH2CH3
III. CH3CH2CH2CH2OH
a) I > II > III.
b) I > III > II.
c) III > I > II.
d) III > II > I.
calculate the amount of heat required to heat 725 g of water from 22.1oc to 100.0oc. (swater = 4.184jg-1oc-1) A. 236.3 kJB. 15.3 kJC. 0.51 kJD. -64.1 kJ
The amount of heat required to heat 725 g of water from 22.1oC to 100.0oC is approximately 236.3 kJ.
To calculate the amount of heat required to heat 725 g of water from 22.1oC to 100.0oC, we can use the formula:
Q = m × c × ΔT
where Q is the amount of heat, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
Substituting the given values, we get:
Q = 725 g × 4.184 J/g.oC × (100.0oC - 22.1oC)
Q = 725 g × 4.184 J/g.oC × 77.9oC
Q = 236337.08 J or 236.3 kJ (rounded to one decimal place)
Therefore, the amount of heat required to heat 725 g of water from 22.1oC to 100.0oC is approximately 236.3 kJ. This is a significant amount of heat and highlights the importance of understanding the properties of water when studying thermodynamics and heat transfer.
To know more about heat capacity of water visit:
https://brainly.com/question/24130199
#SPJ11
what is the return value of the following function call? assume that infd is a valid file descriptor. lseek(infd, 0, seek_end); -1 1 0 the file size in bytes of the file corresponding to infd
The possible return values of this function call are:
If the function call succeeds, it returns the file size in bytes of the file corresponding to infd.
If the function call fails, it returns -1 and sets errno to indicate the error.
The return value of the function call lseek(infd, 0, SEEK_END) depends on whether it succeeds or fails. The lseek() function is used to change the file offset of the open file associated with the file descriptor infd. In this case, the function call sets the file offset to the end of the file.
If the function call succeeds, it returns the resulting file offset as a off_t type value. In this case, the resulting file offset will be the file size in bytes of the file corresponding to infd.
If the function call fails, it returns -1 and sets errno to indicate the error. Possible errors include EBADF if infd is not a valid file descriptor, ESPIPE if infd refers to a pipe or FIFO, or EINVAL if the whence argument (in this case, SEEK_END) is invalid.
Click the below link, to learn more about return value of function call:
https://brainly.com/question/12939282
#SPJ11