Answer:
E
Explanation:
all of those make sense
Which of the following accounts for why some American manufacturing companies have located factories in Mexico?
Abundant capital resources,
A supply of inexpensive labor
Favorable climate conditions,
Political stability in the region
The correct answer is B. A supply of inexpensive labor
Explanation:
Manufacturing most products in Mexico is cheaper than doing this in the U.S. The main reason for this is that in Mexico labor (workers needed for production) is cheaper than in the U.S. This factor is related to the fact the currency in Mexico has less value than the currency in the U.S. and the social, economic, cultural conditions are different. Besides this, production can be easily controlled in Mexico because this borders the U.S. According to this, one factor that makes some American companies locate factories in Mexico is the supply of inexpensive labor.
Which is the best example for long term movements
A taking a quick trip to the store
B going to school each day
C moving to a new state
D visiting the library after school
How will the polar jet stream most likely affect weather conditions? *
It will cause precipitation
it will make temperatures colder.
It will form a hurricane
It will pull hot air into a region
Answer:
it will make temps colder
Explanation:
The competence of a stream is affected by everything except
O velocity
water depth
O gradient
water volume
water temperature
The competence of a stream is affected by what?
Answer:
1. The competence of a stream is affected by everything except
water depth.
2. The competence of a stream is affected by:
a. flow velocity
b. slope gradient
c. water volume
d. water temperature, which increases or reduces the water volume.
e. riverbed frictions
Explanation:
Stream competence refers to the ability of a stream to transport a particular size of particle or debris. The "competence" of a river or stream is measured by the largest particles that the river or stream can transport from one point to the next.
What causes the wavelength of a particular beam of light change?
Answer:
Wave speed, frequency and wavelength in refraction
Explanation:
Although the wave slows down, its frequency remains the same, due to the fact that its wavelength is shorter. When waves travel from one medium to another the frequency never changes. As waves travel into the denser medium, they slow down and wavelength decreases.
Wave speed, wavelength in refraction and frequency causes the wavelength of a particular beam of light change.
What is wavelength of a light?The wavelength of light is the separation between both the two crests or troughs of the light wave. It is recognized by the Greek letter lambda (). Therefore, the term "wavelength" refers to the distance between the crest or trough of one wave and the wave that follows it.
The number of waves that travel through a single location in a specific amount of time determines frequency, and the distance between two subsequent troughs or crests determines wavelength. As a result of the inverse connection between wavelength and frequency, frequency falls as wavelength increases.
The wave slows down, but because its wavelength is shorter, its frequency doesn't change. Waves' frequency does not alter as they go from one medium to another. Waves slow down and shorten in wavelength when they move through denser media.
To learn more about wavelength
https://brainly.com/question/12924624
#SPJ2
what is coastal landform
PLS HELP ASAP! WILL GIVE BRAINLIEST!!!
Answer:
that is my answer hopes it helps you wish you all the bestExplanation:
Some of the environment changes are caused by the slow movement of the continents (plates tectonics) and take a millions of years. Most of the changes or cause by the human influences and natural ecological process.Find the measure of the missing angle.
25°
Answer:23
Explanation:
soil lies between the biosphere an
d what?
Characteristics used to describe matter are called
A. physical properties.
O
B. chemical properties.
O
C. both A and B.
o
D. neither A nor B.
Characteristics used to describe matter are called physical properties. Therefore, option A is correct.
What are physical properties?A physical property of matter can be defined as a characteristic of a substance that can be evaluated without changing the identity of the material. For example, silver is shiny metal, that shows malleability, and conducts electricity.
Physical properties can be measured without altering the chemical composition of matter. Physical properties include density, malleability, electrical conductivity, color, solubility, hardness, melting point, and boiling point. There are two kinds of physical properties which are intensive and extensive properties.
Chemical properties can be described by their potential to chemical change by virtue of their chemical composition. The elements, chemical bonds, and electrons are involved in the chemical change.
Physical properties are general characteristics that describe matter. They have characteristics such as shape, size, color, and mass. These characteristics can be observed without changing the identity of the matter.
Learn more about physical properties, here:
brainly.com/question/1935242
#SPJ5
what is universal gas constant
Answer:
Universal gas constant (which could also refer to molar gas constant, universal gas constant, or ideal gas constant) is essentially the units of energy of temperature. Since all energy is just heat, the universal gas constant, at least to my knowledge, it just a theorem to describe the heat of the temperature.
Explanation:
May I have brainliest please? :)
PLS HELP ASAP
The map that shows topography is called a _____ map.
political
climatic
physical
population
Answer: physical
Explanation:
Answer:
★ The answer is PHYSICAL
Explanation:
★ The map that shows topography is called a physical map.
what did we use instead of pumpkins on halloween in the old days
4(x - 3) = 20
Please give me the answer
Answer:8
Explanation:
Explanation:
[tex]4x - 12 = 20 \\ 4x = 20 + 12 \\ 4x = 32 \\ x = 32 \div 4 \\ x = 8.[/tex]
hope this helps. please mark as brainliest. The answer is 8.
1. ridge push is also known as gravitational sliding plate. true or false 2. slab pull is also known as sliding plate force. True or false. 3. slab pull is the other possible process involved in the tectonic plate movement. True or false. 4.thermal convection is a continuous process.once the hot less dense particles cool don , they sinks and the other less dense particles rise. True or false
Answer:
1. True.
2. False.
3. True.
4. True.
Explanation:
Ridge push is also known as gravitational sliding plate that happens at mid-ocean ridges. Slab pull is the pulling force exerted by a cold oceanic plate that is denser go inside into the mantle due to its weight. Slab pull is the other process that is responsible for the movement of tectonic plate. When the hot less denser particles cool down, they sinks due to their more mass and the other less dense particles rises up.
The Latin word vivere means to live. Based on this which of these is MOST LIKELY the meaning of the word rivere? A) to end life. B) to restore life. C) to withhold life. D) to carry out life
2
Answer:
It's to restore life
Explanation:
Everyone knows that the word revive means to restore a person's life/ restore something to it's former glory.
Elaborate your reason why you think duterte is the best?
because he is the one who fought the npa's and cought the drug users
What do the Orange and Zambezi rivers provide
Answer:
The Zambezi River is widely used by wildlife and humans alike. Hippos, crocodiles, baboons, elephants, hyenas and lions are some examples of wildlife you might find along the Zambezi. Humans use the river for transportation, irrigation, tourism and hydropower.
Despite the navigation drawbacks of the Orange, its contribution to agriculture is far from negligible. Farmers use its waters exhaustively for irrigation and growth of citrus fruits, which do extremely well in the Mediterranean climate of the southern African region.
The process of nomadic hunter gatherers becoming sedentary farmers.
Answer:
It took climate change, fertile river valleys, domestication of crops and animals so that the hunter-gatherers became sedentary farmers.
Explanation:
Initially, all humans were hunter-gatherers. This was due to multiple reasons, with one the biggest one probably being the climate which was not enabling good conditions for the hunter-gatherers to transform their lifestyle. All other conditions needed were stopped because of the climate conditions, so humans had to do what they could to survive in those conditions.
About 10 years ago though the bad climate conditions ended, or rather the Ice Age ended. This resulted in a much warmer climate, which in turn created much more water bodies like rivers and lakes, much more vegetation, and they contributed to the creation of much more fertile soil.
With these conditions in place, the humans quickly saw that there is huge potential in some plants and animals, so they started to farm them, select the ones with the best characteristics, and gradually producing enough food for themselves. With the food problem solved, humans didn't have the need to wonder around all the time, so they started abandoning the hunter-gatherer lifestyle and started settling in one place.
what's your view on molarity and law
Answer:
The terminology is outlined in the overview paragraph according to the particular circumstance.
Explanation:
The law pertains to the legislature's collection of policies as well as guidelines to govern individual behavior and conduct. For something like an individual creature, morality corresponds to something like the standards of conduct.Therefore the cornerstone of the law remains morality, although morality remains guaranteed by behaving and as per the constitution.
Which of these can be categorized as a secondary economic activity?
A) teaching
B) healthcare
C) coal mining
D) textile production
Answer:D I just took the test it’s D
suggest two actions to reduce smog.ensure that each action is written and explained in detailed paragraphs.each paragraph must include 10-15 sentences.
Answer:
Explanation:
The Clean Air Act of 1970 and the amendments since then have done a great job in requiring people to clean up the air over the United States. Emissions of the six major pollutants regulated by the Clean Air Act, carbon monoxide, lead, nitrous oxides, ozone, sulfur dioxide, and particulates, have decreased by more than 50%. Cars, power plants, and factories individually release less pollution than they did in the mid-20th century. But there are many more cars, power plants, and factories. Many pollutants are still being released and some substances have been found to be pollutants that were not known to be pollutants in the past. There is still much work to be done to continue to clean up the air.How can air pollution be reduced? Using less fossil fuel is one way to lessen pollution. Some examples of ways to conserve fossil fuels are:
Riding a bike or walking instead of driving.
Taking a bus or carpooling.
Buying a car that has greater fuel efficiency.
Turning off lights and appliances when they are not in use.
Using energy efficient light bulbs and appliances.
Buying fewer things that are manufactured using fossil fuels.
Need answer before 7 minutes pass
thanks
I need an answer that is at least 30 words long
⇒ The main purpose of Daylight Saving Time is to:
Answer:
I'd say the main purpose of Daylight Saving Time is that it saves energy. To explain, during Daylight Saving Time, the sun sets one hour later in the evening, so the need to use electricity for household lighting and appliances is reduced.
What kind of energy is produced by a volcano?
Answer:
geothermal energy
Which religious person is considered to be on a pilgrimage
Answer:
A pilgrim.
Explanation:
Pilgrimage has been proposed as a Juniata archetype by Wallace Clift.
Answer:
a muslim who visits mecca and other holy places related to islam
Explanation:
edg. 2020, not 100% sure tho
Why is aq. Na2CO, basic?
Answer:
Basicity is due to the increase in OH− ions. So, the more Na+ is hydrolysed more OH− are produced, hence aqueous solution of Na2CO3 is basic in nature.
1. What did you learn today about the impact the slave trade had on Africa?
2. What was something you didn't know before this week about the Atlantic Slave Trade?
3. Why do you think it is important to learn about this part of our World History?
Question
What aspects of Latin American culture have most been influenced by the European colonization of the past?
Answer:
Language and religion are the cultural traits that have been influenced the most by European colonization.
Explanation:
Latin America is a region that spreads from Mexico through Central America and South America. The majority of this region has been colonized by Spain, with Portugal having a big chunk in Brazil and several other colonizers but on a much smaller scale. Having the region under their control, the colonizers managed to have a big influence on the population, and some of the biggest influences can be seen in the language and religion of the region.
In all of the countries of the region, the most spoken language is Europen, mostly Spanish and Portuguese, with all other languages that are presently being used locally or on a much smaller scale. The religion in this region is the same throughout it, with Catholic Christianity being by far the most dominant religion, and it has been brought and forced upon the natives by the Spanish and Portuguese.
Answer:
language and religon
Explanation:
How is the play, Killing Time, a typical one-act play?
Answer:
It fills in the extra time that would usual be the transition to the next act in the play. It's a supplement of sorts.
Explanation:
Hope this helped!
Answer:
The play, Killing Time, is a typical one-act play because it usually focuses on one main/big event
Which statement describes a feature of a conic projection? (There is only one correct answer.)
A. Pilots use this projection type.
B. The equator usually serves as the central point.
C. Latitude lines connect at a central point.
D. Conic projections are the most distorted type.
Answer:
the anser is A Pilots use this projection type.
Explanation:
hehe
The statement that can be considered as a feature of a conic projection as regards this question is :A. Pilots use this projection type.
Conic projection can be regarded as map projection whereby there is a projection of an area of the earth on to a cone, and in this case the vertex is been placed above one of the poles.Conic projection are been utilized in mid-latitude zones having an (east–west) orientation. It is been used by a pilot.
Therefore, option A is correct.
Learn more at:https://brainly.com/question/12498006?referrer=searchResults