Answer:
b
Explanation:
b
The type of structure would contain a few non-metal atoms are simple covalent structure. Option B is correct.
What is covalent structure?A covalent bond is a chemical bond between two atoms, ions or molecules in which electron pairs are shared between elements and covalent bond can also be said as a molecular bond.
Covalent bonds form or made by between two non-metallic atoms or compounds with identical or same electronegativity for example hydrogen and oxygen are two non metals and bond to form water molecule.
Therefore, type of structure would contain a few non-metal atoms are simple covalent structure. Option B is correct.
Learn more about covalent structure, here:
https://brainly.com/question/6476147
#SPJ2
crossover formula of potassium oxide.
Answer:
K2O
Explanation:
It carries the chemical formula K2O. Potassium cannot be found free because it is too reactive. It has valency +1 and combines readily with oxygen atoms forming K2O.
hope it helps
What type of solid consists of positive metal cations surrounded by valence electrons that
are donated by the metal atoms and belong to the solid as a whole?
Select one:
O a. ionic
O b. covalent network
O c. metallic
O d. covalent molecular
Which would cause an electric circuit to lack a current?
open switch
closed switch
lighted bulbs
unlighted bulbs
Answer:
A) open switch
Explanation:
it is an open switch, seeing that when the switch is open, there is a gap between the wire and switch preventing any electric current from flowing. A closed switch is the opposite.
The flow of current is needed to be circuit closed. The electrons are starts following form one end to other end. The lack of current in the circuit is due to open switch.
What is current?Current is said to be the flow of electrons in an electric circuit. The electrons starts flow is mainly due to potential difference.
Current is represented by I.
SI unit of current is Ampere.
In home, the circuit is designed in such a way that, the flow of electricity is controlled by switch. If switch is off mode, there is no electricity flow and glow light or electrical application.
Voltage is the difference in electric potential between two points. Current is just the rate of flow of electric charge.
To find more about current, refer the link below:
brainly.com/question/14326678
#SPJ6
Three compounds that nitrogen and oxygen can form are NO, NO2, and N2O3. The law of multiple proportions tells you
A. the ratio of nitrogen to oxygen is always the same.
B. nitrogen combines with oxygen in small whole number mass ratios.
C. energy is conserved.
D. mass is conserved
The postulation of the law of multiple proportions tells us that; Choice B. nitrogen combines with oxygen in small whole number mass ratios.
The law of Multiple Proportions
Law of multiple proportions states that if two elements form more than one compound, then the ratios of the masses of the second element which combine with a fixed mass of the first element will always be ratios of small whole numbers.
On this note, nitrogen combines with oxygen in small whole number mass ratios.
Read More on Law of Multiple Proportions:
https://brainly.com/question/24435494
A solution of Cuso, is labelled 1.743 M. How much Cuso, in grams, must be used to make
1.4957 liter of solution?
Select one:
O a. 416.1
Ob. 0.007301
O c. 166.6
Od. 129.2
Answer:
Option A. 416.1 g.
Explanation:
Data obtained from the question include the following:
Molarity = 1.743 M
Volume = 1.4957 L
Mass of CuSO4 =..?
Next, we shall determine mole of CuSO4 present in the solution.
This is illustrated below:
Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:
Molarity = mole /Volume
With the above formula, we can obtain the mole CuSO4 present in the solution as follow:
Molarity = 1.743 M
Volume = 1.4957 L
Mole of CuSO4 =..?
Molarity = mole /Volume
1.743 = mole of CuSO4 /1.4957
Cross multiply
Mole of CuSO4 = 1.743 x 1.4957
Mole of CuSO4 = 2.607 moles
Finally, we shall convert 2.607 moles of CuSO4 to grams.
This can be obtained as follow:
Molar mass of CuSO4 = 63.55 + 32.06 + (16x4) = 159.61 g/m
Mole of CuSO4 = 2.607 moles
Mass of CuSO4 =..?
Mole = mass /molar mass
2.607 = mass of CuSO4 /159.61
Cross multiply
Mass of CuSO4 = 2.607 x 159.61
Mass of CuSO4 = 416.1 g
Therefore, 416.1 g of CuSO4 is needed to prepare the solution.
A certain polyatomic ion contains 49 protons and 50 electrons. What's the net charge of this ion?
A. +1
B.-2
C. +2
D. -1
Answer:
The charge - 1
Because the charge of proton is + and electron -
Charge = +49 +(-50)
= - 1
Explanation:
What causes hydrogen bonding?
bonding of a covalently bonded hydrogen atom with an unshared electron pair
motion of electrons
attraction between ions
sharing of electron pairs between two adjacent hydrogen atoms
Answer:
the tendency of some atoms in molecules to attract electrons more than their accompanying atom.
Explanation:
Calculate the amount of 0.1 M acid needed to neutralize 10,000 liters of pH 8.0 water. The acid is Sulfuric Acid - H2SO4 Show your work for brainliest
Answer:
0.963
Explanation:
pH is the potential of hydrogen that can be determined by the hydrogen or hydroxide ion concentration. 10 mL is the amount required of 0.1 M to neutralize.
What is pH?pH estimates the acidic and the basicity of the solution when a solute is dissolved in the solvent.
Sulfuric acid is dissociated as:
H₂SO₄(aq) ⇌ H⁺(aq) + HSO₄⁻(aq)
pH is calculated as:
pH = -log [H⁺]
[H⁺] = 1x10⁻⁸ M
The moles in 10,000 L is, 10000L × 1x10⁻⁸ = 0.0001 moles
Moles of sulfuric acid required:
0.0001 moles × ( 1 mol H2SO4 ÷ 1 mol H⁺) = 0.001 moles
Further, volume is calculated as:
0.001 × (1L ÷ 0.1moles) = 0.01 L
Therefore, 10 mL of 0.1 M acid is needed to neutralize.
Learn more about pH and volume here:
https://brainly.com/question/23582578
#SPJ2
A gaseous substance turns directly into a solid. Which term describes this change?
O deposition
O evaporation
O melting
O sublimation
Answer:
deposition
Explanation:
Sublmation- solid transforming into a gas, skipping the liquid stage.
eveporation- a liquid transformimg into a gas
melting- a solid transforming into a liquid
deposition- the opposite of sublimation (your anwser)
A gaseous substance turns directly into a solid. The term which is indicative of this change is deposition.
Evaporation is a process in which a liquid which when exposed to heat boils and converted into vapors of water. For example, the water is converted into water vapors. Melting is a process in which the solid substance when exposed to heat melts . In this a solid is converted into liquid. For example, a solid ice is melted into liquid. Sublimation is a process in which a solid is converted into a vapor state without being converted into a liquid. For example, dry ice in which the solid dry ice is converted into vapors in presence of air. Deposition is the process in which gaseous molecules aggregate and combine to form a solid. It is opposite of sublimation process. For example, conversion of water vapors to ice.Hence, deposition is the correct option.
Learn more about sublimation:
https://brainly.com/question/13773373
Which of the following statements is true?
A Question Progress A
A. Factors that affect the reaction rate can increase the speed of a reaction but not the
yield.
O
B. None of these
C. Catalysts are important to industry to increase product yields
D. A reaction can be sped up by reducing the surface area of solid reactants.
Reset Selection
Answer:
c
Explanation: c
The statement that is true from the following is catalysts are important to the industry to increase product yields. The correct option is C.
What is a catalyst?Catalysts are substances that speed up or increase the rate of reaction. The biological catalysts are enzymes. Enzymes are made up of proteins, and they are used in the reaction to increase the yield in less time. Catalyst does not mix with the process and after the reaction.
There are many chemical catalysts like nickel and iron. These catalysts are used in chemical and manufacturing processes. They impact, accelerate, and promote the reaction to get different yields.
Thus, the correct option is C. Catalysts are significant to industry to increase product yields.
Learn more about catalysts, here:
https://brainly.com/question/12260131
#SPJ5
A sample of oxygen gas has a volume of 45.8 mL when its pressure is 0.492 atm. What
will the volume of the gas be at a pressure of 0.954 atmospheres, if the temperature
remains constant?
Select one:
O a. 23.6
Ob. 0.0102
O c. 88.8
O d. 0.0113
Answer:
a. 23.6Explanation:
[tex]P_1=0.492\:atm\\V_1 = 45.8\:ml\\V_2 = ?\\P_1 = 0.954\:atm\\\\Boyle's Law = P_1V_1 = P_2V_2\\\\Lets \:make\: V \:subject\:of\:the\:formula\\\\\frac{P_1V_1}{P_2} = \frac{P_2V_2}{P_2} \\ \\V_2 =\frac{P_1V_1}{P_2} \\V_2 = \frac{0.492\times45.8}{0.954}\\ \\V_2 = \frac{22.5336}{0.954} \\\\V_2 = 23.620\\\\V_2 = 23.6[/tex]
In what type of reaction is a C=C or C≡C bond created?
Answer:
A carbon–carbon bond is a covalent bond between two carbon atoms.
Explanation:
Find the mass of 3.02 mol Cl2.
Answer in units of g.
Answer:
the answer is 70.906 g/mol
Explanation:
Answer:
214.12 g
Explanation:
mass = no. of moles x molar mass
molar mass of Cl2 = atomic mass of Cl x 2
= 35.453 x 2
=70.906
so the mass of 3.02 mol Cl2 = 3.02 x 70.906
=214.12 g
A reaction between ethene and oxygen is used to produce epoxyethane. When silver is combined with ethene, the reaction for producing epoxyethane occurs much faster. What role does silver play in this chemical process?
A. Silver is a catalyst in this reaction.
B. Silver is a p-type semiconductor in this reaction.
C. Silver causes hydrolysis in this reaction.
D. Silver is an n-type semiconductor in this reaction.
Answer:
A. Silver is a catalyst in this reaction.
Explanation:
The most common use of rare-earth metals is as catalysts in chemical reactions.
To solve such this we must know the concept of chemical reaction. Therefore, the correct option is option A that is Silver is a catalyst in this reaction.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
A reaction between ethene and oxygen is used to produce epoxyethane. When silver is combined with ethene, the reaction for producing epoxyethane occurs much faster. Silver is a catalyst in this reaction.
Therefore, the correct option is option A that is Silver is a catalyst in this reaction.
Learn more about the chemical reactions, here:
brainly.com/question/3461108
#SPJ5
A compound containing oxygen and group 16 and/or group 17 elements contains one of the following elements. The compound dissolves in water. Which element does
the compound contain?
A. Magnesium
B. Potassium
C. Barium
D. Strontium
Explanation:
pottassium its one of covalent bond
Determine the rate of a reaction that follows the rate law:
Answer:
C
Explanation:
I am not 100% sure tho correct me if I'm wrong pls:/
To what volume will a 2.33 L sample of gas expand if it is heated from 10.0°C to 100.0°C? Group of answer choices 0.233 L 4.41 L 23.3 L 3.76 L 3.07 L
Answer:
3.07 L
Explanation:
This question describes Charles law, which shows the direct relationship of the absolute temperature to its volume when the pressure is kept constant. The Charles' law equation is:
V1/T1 = V2/T2
Where; V1 is the volume of the gas at an initial state
V2 is the volume of the gas at a final state
T1 is the absolute temperature of the gas at an initial state
T2 is the absolute temperature of the gas at a final state.
According to the question, V1 = 2.33L, V2 = ?, T1 = 10°C, T2 = 100°C
The absolute temperature unit, which is Kelvin, need to be used. Hence, we convert °C to Kelvin using:
T(K) = T(°C) + 273.15
T1 (K) = 10°C + 273.15 = 283.15K
T2 (K) = 100°C + 273.15 = 373.15K
To solve for V2 in the above Charles law equation, we make V2 the subject of the formula by saying:
V2 = V1 × T2 / T1
V2 = 2.33 × 373.15 / 283.15
V2 = 869.4395/ 283.15
V2 = 3.0705
Hence, the gas will be expanded to a volume of 3.07L when heated from 10.0°C to 100.0°C.
Mr. Avogadro started with 5.14x10^22 atoms of Pa-234. Ten days later Mr. Avogadro calculated the original sample had only 6.43 X 10^21 atoms of Pa-234. What's the half life of Pa-234? PLEASE HELP WILL MARK BRAINLIEST!!
According to the phase diagram for H20 what happens to the phases of water at 1 atm pressure as the temperature is increased from -10 degrees Celsius to 110 degrees
Answer: D. Water changes from a gas to a solid to a liquid.
Explanation:
Wat
According to the phase diagram for [tex]H_{2}O[/tex] water changes from a solid to a gas to a liquid at 1 atm pressure as the temperature is increased from -10 degree Celsius to 110 degree Celsius.
Phase diagram for water systemThe phase diagram of water system comprises graphical representation of various phase. The slope of line connecting the solid state and liquid states is -ve (negative) rather than +ve (positive).
Water is an unusual substance in solid state is less denser in its liquid state. In liquid state of water ice floats.
Water exists 3 phases the solid phase (ice), the liquid phase (water),the gaseous phase (steam).Here, the phase of water changes from a solid to a gas to a liquid.
Thus, from above conclusion we can say that water changes from a solid to a gas to a liquid at 1 atm pressure as the temperature is increased from -10 degree Celsius to 110 degree Celsius.
Learn more about phase diagram of water system here: https://brainly.com/question/1612862
#SPJ2
Given the reaction: N2(9) +2O2(g) = 2NO2(9) The forward reaction is
endothermic. Determine which of the following changes would result in more
product being produced.
I. Increase NO2
II. Decrease O2
III. Add a catalyst
IV. Increase the temperature
V. Increase the pressure
A. IV and V
B. I and 11
C. II and IV
D. II, III, and V
Reset Selection
Needed to make one s'more: 2 graham crackers, 3 squares of milk chocolate, and 2 marshmallows.
Maddie and her friends are making s'mores over the campfire. they have a bag of 48 marshmallows, 2 packs of graham crackers containing 16 grahams per pack, and 5 chocolate bars that can each be broken into 15 pieces. if maddie's group wants to make s' mores for all, how many can they make and what is the limiting reactant?
Answer:
15
Explanation:
Describe one way in which each of the items you listed in Part 1 could be at least temporarily disrupted from equilibrium. Can you think of a way your body could respond to restore homeostasis after one of these disruptions? (3 points) Think about things that stress the body or do not supply the body's needs properly.
Answer:
Not enough exercise, not enough water, not a healthy diet. Consume fluids regularly during exercise, and drink 16 ounces of fluid for every pound lost during your workout.
Explanation:
Which of the following chemical equations depicts a balanced chemical
equation?
O A. AgNO3 + K2 CrO4- > KNO3 + Ag2Cr04
B. 3AgNO3 + 2K2 CrO4- > 3KNO3 + 2Ag2 CrO4
OC. 2AgNO3 + K2 CrO4- > 2KNO3 + Ag2Cr04
OD. AgNO3 + K2 CrO4- > 2KNO3 + Ag2Cr04
Reset Selection
The balanced chemical equation is [tex]2AgNO_{3} + K_{2} CrO_{4}[/tex] → [tex]2KNO_{3} + Ag_{2} CrO_{4}[/tex].
What is a balanced chemical equation?
An equation that has the same quantity and type of atom on both ends of the arrow was seen to represent a balanced chemical reaction. A chemical reaction would be represented symbolically in writing by a chemical equation.
The balanced chemical equation is [tex]2AgNO_{3} + K_{2} CrO_{4}[/tex] → [tex]2KNO_{3} + Ag_{2} CrO_{4}[/tex].
It can be seen that,
The number of Ag molecules on the reactant side is 2.
The number of Ag molecules on the reactant side is 2.
The number of K molecules on the reactant side is 2.
The number of K molecules on the reactant side is 2.
The balanced chemical equation is [tex]2AgNO_{3} + K_{2} CrO_{4}[/tex] → [tex]2KNO_{3} + Ag_{2} CrO_{4}[/tex].
Therefore, the correct answer will be an option (C).
To know more about the balanced chemical equation.
https://brainly.com/question/15052184
#SPJ2
The chemical equation shown represents photosynthesis. Carbon dioxide plus A plus light with a right-pointing arrow towards B plus oxygen. The arrow has an x above it. What is the role of substance A in photosynthesis? (5 points) Question 4 options: 1) It stores chemical energy for plants and animals. 2) It traps light energy and converts it into chemical energy. 3) It combines with carbon dioxide and light to form glucose. 4) It combines with carbon dioxide and light to form hydrogen.
Answer:
2
Explanation:
Which atomic model shows the atom as a positively charged sphere with negatively charged electrons spread throughout
it?
A. Dalton's model
B. Thompson's model
C. Bohr's model
D. None of these
Answer:
B) Thomson's Model
Explanation:
Dalton's Model simply consisted of small spheres that represented atoms, and Bohr's model had a nucleus in the center with electrons orbiting in strict orbits, not randomly spread throughout. Thomson's plum pudding model, however, had an overall positively charged atom with many electrons spread throughout. If you search up "Plum Pudding Model" you can visually understand this.
If you want further tutoring help in chemistry or other subjects for FREE, check out growthinyouth.org.
how many molecules of water are present in a 5.65 mole sample of water
Answer:
5.65
Explanation:
What kind of matter is smoke? A. solution B. suspension C. colloid D. compound E. molecule
Answer:
C. colloid
Explanation:
Smoke is a collection of tiny solid, liquid and gas particles. Although smoke can contain hundreds of different chemicals and fumes, visible smoke is mostly carbon (soot), tar, oils and ash. Smoke is a collection of tiny solid, liquid and gas particles.
Answer:
C. Colloid
Explanation:
Edmentum/Plato (just took the test its 100% correct)
Which molecule contains a total of seven carbon atoms?
2-methyl-heptyne
2-methyl-propane
3-methyl-2-hexene
3-methyl-1-pentene
Answer:
3-Methylhex-2-ene
Explanation:
You count the atoms in the stems of the names and add them up.
C. 3-Methylhex-2-ene
Methyl = 1C
Hexene = 6C
Methylhexene = 7C
A. 2-Methylhept-1-yne is wrong. It has 1C + 7C = 8C
B. 2-Methylpropane is wrong. It has 1C + 3C = 4C
D. 3-Methylpent-1-ene is wrong. It has 1C + 5C = 6C
6. The diagram shows the building blocks of a lipid molecule.
A. Determine the name of each type of molecule.
Molecule A:
Molecule B:
B.How many molecules of A normally combine with one molecule of B to form a single fat molecule?
Answer:
A) Molecule A: Fatty acid
Molecule B: Glycerol
B) 3 molecules of molecule A(fatty acid) normally combine with one molecule of B (glycerol) to form a single fat molecule
Explanation:
QUESTION A:
Fats/lipids are one of the four major biomolecules in living systems. They are polymers, and like any polymer, they are made up of monomeric units which serve as building blocks. In the case of fats/lipids, fatty acids and glycerol are the two major building blocks.
Fatty acids are biological compounds made up of a hydrocarbon chain with a terminal carboxyll group (-COOH), which confers its acidic properties upon it. Hence, based on the structural diagram of molecule A in the attached image, it can be observed that the functional group is a carboxyll group. Therefore, molecule A is a FATTY ACID.
Glycerol is a compound with more than one hydroxyll group (-OH) in its chemical structure. It has the chemical formula; C3H8O3 with three hydroxyll groups attached to each of the carbon atoms. Therefore, as observed in the image, molecule B is a GLYCEROL because it contains 3 hydroxyll groups.
QUESTION B:
In the chemical structure of a fat molecule, three fatty acids are attached to each of the three carbon atoms of the glycerol molecule. This is done through the process of esterification i.e. combination of carboxyll group with hydroxyll group. Due to the fact that it takes 3 molecules of fatty acids to combine with one molecule of glycerol, fats are referred to as triglycerides.
What is DNA? A. A Carbohydrate B. A protein C. A nucleic acid D. A lipid
Answer:
C: a nucleic acid
Explanation:
The function of nucleic acids is to store and express genetic information. Since fragments of DNA called genes encode the information to produce certain proteins, they are classified as nucleic acids.
If you want further tutoring help in biology or other subjects for FREE, check out growthinyouth.org.